-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
Coiled Spring PinsSpring Steel, ISO 8750 : 1.5 - 5mm Dia.
SEP
MaterialSpring Steel (CS67 DIN 17222), hardened and tempered to
HV 420-520.Other sizes (0.8 to 16mm diameters) and lengths plus
Inch sizes available, P.O.A. ISO 8748 (heavy duty) and ISO 8751
(light duty) available for 1.5 to 8mm diameters, P.O.A. Minimum
Double Shear Strength: Tested to ISO 8749.
FinishesCoiled pins are normally supplied with a plain oiled
finish.Steel pins may be given a protective finish such as zinc,
phosphate, etc but for electrolytically applied finishes it is
essential to de-embrittle the pins immediately after plating.Since
the de-embrittlement process is not completely reliable,
non-electrolytic finishes or stainless should be used for
safety-critical applications.Where pins are to be used in plastic
assemblies, it is recommended that they are de-oiled before use to
avoid embrittlement of the plastic.
FeaturesCoiled spring pins consist of 2¼ coils and have swaged
chamfers at each end. They are designed for plain drilled holes,
but countersinking makes insertion easier.The coiled design
improves shock absorption as the load is spread over more than one
coil.Assembly is easier as the insertion force needed is lower.The
pins cannot interlock when in bulk, which is a benefit when they
are to be barrel plated or installed using bowl-fed equipment.
SEP1.5-5SEP1.5-6SEP1.5-8SEP1.5-10SEP1.5-12SEP1.5-14SEP1.5-16SEP2-6SEP2-8SEP2-10SEP2-12SEP2-14SEP2-16SEP2-18SEP2-20SEP2-35SEP2.5-8SEP2.5-10SEP2.5-12SEP2.5-14SEP2.5-16SEP2.5-18SEP2.5-20SEP2.5-22SEP2.5-24SEP3-10SEP3-12SEP3-14SEP3-16SEP3-18SEP3-20SEP3-22SEP3-24SEP3-26
1.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.53.03.03.03.03.03.03.03.03.0
1.621.621.621.621.621.621.622.132.132.132.132.132.132.132.132.132.622.622.622.622.622.622.622.622.623.153.153.153.153.153.153.153.153.15
1.731.731.731.731.731.731.732.252.252.252.252.252.252.252.252.252.792.792.792.792.792.792.792.792.793.303.303.303.303.303.303.303.303.30
568
10121416
68
10121416182035
81012141618202224101214161820222426
1.501.501.501.501.501.501.501.991.991.991.991.991.991.991.991.992.492.492.492.492.492.492.492.492.492.992.992.992.992.992.992.992.992.99
1.601.601.601.601.601.601.602.102.102.102.102.102.102.102.102.102.602.602.602.602.602.602.602.602.603.103.103.103.103.103.103.103.103.10
1.451.451.451.451.451.451.452.502.502.502.502.502.502.502.502.503.903.903.903.903.903.903.903.903.905.505.505.505.505.505.505.505.505.50
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNSEP3-28SEP3-30SEP3-35SEP3-40SEP3.5-12SEP3.5-14SEP3.5-16SEP3.5-18SEP3.5-20SEP3.5-22SEP3.5-24SEP3.5-26SEP3.5-28SEP3.5-30SEP3.5-35SEP4-10SEP4-12SEP4-14SEP4-16SEP4-18SEP4-20SEP4-22SEP4-24SEP4-26SEP4-28SEP4-30SEP4-35SEP4-40SEP4-45SEP5-14SEP5-16SEP5-18SEP5-20SEP5-22
3.03.03.03.03.53.53.53.53.53.53.53.53.53.53.54.04.04.04.04.04.04.04.04.04.04.04.04.04.05.05.05.05.05.0
3.153.153.153.153.643.643.643.643.643.643.643.643.643.643.644.204.204.204.204.204.204.204.204.204.204.204.204.204.205.255.255.255.255.25
3.303.303.303.303.793.793.793.793.793.793.793.793.793.793.794.404.404.404.404.404.404.404.404.404.404.404.404.404.405.505.505.505.505.50
28303540121416182022242628303510121416182022242628303540451416182022
2.992.992.992.993.483.483.483.483.483.483.483.483.483.483.483.983.983.983.983.983.983.983.983.983.983.983.983.983.984.954.954.954.954.95
3.103.103.103.103.623.623.623.623.623.623.623.623.623.623.624.124.124.124.124.124.124.124.124.124.124.124.124.124.125.125.125.125.125.12
5.55.55.55.55.55.55.55.55.55.55.55.55.55.55.59.69.69.69.69.69.69.69.69.69.69.69.69.69.6
15.015.015.015.015.0
Diameter (ØD) To Fit Hole
ØD
ØDL
5-10±0.2512-50±0.5055+ ±0.75
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
Coiled Spring PinsSpring Steel, ISO 8750 : 5 - 12mm Dia.
SEP
MaterialSpring Steel (CS67 DIN 17222), hardened and tempered to
HV 420-520.Other sizes (0.8 to 16mm diameters) and lengths plus
Inch sizes available, P.O.A. ISO 8748 (heavy duty) and ISO 8751
(light duty) available for 1.5 to 8mm diameters, P.O.A. Minimum
Double Shear Strength: Tested to ISO 8749.
FinishesCoiled pins are normally supplied with a plain oiled
finish.Steel pins may be given a protective finish such as zinc,
phosphate, etc but for electrolytically applied finishes it is
essential to de-embrittle the pins immediately after plating.Since
the de-embrittlement process is not completely reliable,
non-electrolytic finishes or stainless should be used for
safety-critical applications.Where pins are to be used in plastic
assemblies, it is recommended that they are de-oiled before use to
avoid embrittlement of the plastic.
FeaturesCoiled spring pins consist of 2¼ coils and have swaged
chamfers at each end. They are designed for plain drilled holes,
but countersinking makes insertion easier.The coiled design
improves shock absorption as the load is spread over more than one
coil.Assembly is easier as the insertion force needed is lower.The
pins cannot interlock when in bulk, which is a benefit when they
are to be barrel plated or installed using bowl-fed equipment.
SEP5-24SEP5-26SEP5-28SEP5-30SEP5-35SEP5-40SEP5-45SEP5-50SEP6-16SEP6-18SEP6-20SEP6-22SEP6-24SEP6-26SEP6-28SEP6-30SEP6-35SEP6-40SEP6-45SEP6-50SEP6-55SEP6-60SEP8-16SEP8-20SEP8-22SEP8-24SEP8-26SEP8-28SEP8-30SEP8-35SEP8-40SEP8-45SEP8-50SEP8-55
5555555566666666666666888888888888
5.255.255.255.255.255.255.255.256.256.256.256.256.256.256.256.256.256.256.256.256.256.258.308.308.308.308.308.308.308.308.308.308.308.30
5.505.505.505.505.505.505.505.506.506.506.506.506.506.506.506.506.506.506.506.506.506.508.638.638.638.638.638.638.638.638.638.638.638.63
24262830354045501618202224262830354045505560162022242628303540455055
4.954.954.954.954.954.954.954.955.955.955.955.955.955.955.955.955.955.955.955.955.955.957.937.937.937.937.937.937.937.937.937.937.937.93
5.125.125.125.125.125.125.125.126.136.136.136.136.136.136.136.136.136.136.136.136.136.138.178.178.178.178.178.178.178.178.178.178.178.17
15151515151515152222222222222222222222222222393939393939393939393939
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNSEP8-60SEP8-65SEP8-70SEP10-24SEP10-26SEP10-28SEP10-30SEP10-35SEP10-40SEP10-45SEP10-50SEP10-55SEP10-60SEP10-65SEP10-70SEP10-75SEP10-80SEP10-85SEP12-30SEP12-35SEP12-40SEP12-45SEP12-50SEP12-55SEP12-60SEP12-65SEP12-70SEP12-75SEP12-80SEP12-85SEP12-90SEP12-95SEP12-100
888
101010101010101010101010101010121212121212121212121212121212
8.308.308.30
10.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3012.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.35
8.638.638.63
10.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.75
6065702426283035404550556065707580853035404550556065707580859095
100
7.937.937.939.939.939.939.939.939.939.939.939.939.939.939.939.939.939.93
11.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.90
8.178.178.17
10.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2012.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.22
393939626262626262626262626262626262898989898989898989898989898989
Diameter (ØD) To Fit Hole
ØD
ØDL
5-10±0.2512-50±0.5055+ ±0.75
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
Coiled Spring PinsStainless Steel, ISO 8750 : 0.8 - 4mm Dia.
EP
MaterialA2 Stainless Steel.Other sizes (0.8 to 16mm diameters)
and lengths plus Inch sizes available, P.O.A. ISO 8748 (heavy duty)
and ISO 8751 (light duty) available for 1.5 to 8mm diameters,
P.O.A. Minimum Double Shear Strength: Tested to ISO 8749.
FeaturesCoiled spring pins consist of 2¼ coils and have swaged
chamfers at each end.They are designed for plain drilled holes, but
countersinking makes insertion easier.The coiled design improves
shock absorption as the load is spread over more than one
coil.Assembly is easier as the insertion force needed is lower.The
pins cannot interlock when in bulk, which is a benefit when they
are to be barrel plated or installed using bowl-fed equipment.
ØD
ØDL
5-10±0.2512-50±0.5055+ ±0.75
EP0.8-4EP0.8-6EP0.8-8EP0.8-10EP0.8-12EP1-4EP1-5EP1-6EP1-8EP1-10EP1-12EP1-14EP1-16EP1.2-4EP1.2-8EP1.2-10EP1.2-12EP1.5-5EP1.5-6EP1.5-8EP1.5-10EP1.5-12EP1.5-14EP1.5-16EP1.5-20EP1.5-24EP2-6EP2-8EP2-10EP2-12EP2-14EP2-16EP2-18EP2-20EP2-30EP2.5-8EP2.5-10
EP2.5-12
0.80.80.80.80.81.01.01.01.01.01.01.01.01.21.21.21.21.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.0
0.850.850.850.850.851.051.051.051.051.051.051.051.051.251.251.251.251.621.621.621.621.621.621.621.621.622.132.132.132.132.132.132.132.132.132.132.132.13
0.910.910.910.910.911.151.151.151.151.151.151.151.151.351.351.351.351.731.731.731.731.731.731.731.731.732.252.252.252.252.252.252.252.252.252.252.252.25
468
1012
4568
10121416
48
1012
568
101214162024
68
10121416182030
81012
0.800.800.800.800.801.001.001.001.001.001.001.001.001.201.201.201.201.501.501.501.501.501.501.501.501.501.991.991.991.991.991.991.991.991.991.991.991.99
0.840.840.840.840.841.041.041.041.041.041.041.041.041.241.241.241.241.601.601.601.601.601.601.601.601.602.102.102.102.102.102.102.102.102.102.102.102.10
-----------------
1.051.051.051.051.051.051.051.051.051.901.901.901.901.901.901.901.901.901.901.901.90
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNEP2.5-14EP2.5-16EP2.5-18EP2.5-20EP2.5-22EP2.5-24EP3-10EP3-12EP3-14EP3-16EP3-18EP3-20EP3-22EP3-24EP3-26EP3-28EP3-30EP3-35EP3-40EP3.5-12EP3.5-16EP3.5-18EP3.5-20EP3.5-22EP3.5-24EP3.5-28EP3.5-30EP4-12EP4-14EP4-16EP4-18EP4-20EP4-22EP4-24EP4-26EP4-28EP4-30EP4-35
2.52.52.52.52.52.53.03.03.03.03.03.03.03.03.03.03.03.03.03.53.53.53.53.53.53.53.54.04.04.04.04.04.04.04.04.04.04.0
2.622.622.622.622.622.623.153.153.153.153.153.153.153.153.153.153.153.153.153.643.643.643.643.643.643.643.644.204.204.204.204.204.204.204.204.204.204.20
2.792.792.792.792.792.793.303.303.303.303.303.303.303.303.303.303.303.303.303.793.793.793.793.793.793.793.794.404.404.404.404.404.404.404.404.404.404.40
1416182022241012141618202224262830354012161820222428301214161820222426283035
2.492.492.492.492.492.492.992.992.992.992.992.992.992.992.992.992.992.992.993.483.483.483.483.483.483.483.483.983.983.983.983.983.983.983.983.983.983.98
2.602.602.602.602.602.603.103.103.103.103.103.103.103.103.103.103.103.103.103.623.623.623.623.623.623.623.624.124.124.124.124.124.124.124.124.124.124.12
2.92.92.92.92.92.94.24.24.24.24.24.24.24.24.24.24.24.24.2--------
7.67.67.67.67.67.67.67.67.67.67.6
Diameter (ØD) To Fit Hole
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
Coiled Spring PinsStainless Steel, ISO 8750 : 4 - 12mm Dia.
EP
MaterialA2 Stainless Steel.Other sizes (0.8 to 16mm diameters)
and lengths plus Inch sizes available, P.O.A. ISO 8748 (heavy duty)
and ISO 8751 (light duty) available for 1.5 to 8mm diameters,
P.O.A. Minimum Double Shear Strength: Tested to ISO 8749.
FeaturesCoiled spring pins consist of 2¼ coils and have swaged
chamfers at each end.They are designed for plain drilled holes, but
countersinking makes insertion easier.The coiled design improves
shock absorption as the load is spread over more than one
coil.Assembly is easier as the insertion force needed is lower.The
pins cannot interlock when in bulk, which is a benefit when they
are to be barrel plated or installed using bowl-fed equipment.
ØD
ØDL
5-10±0.2512-50±0.5055+ ±0.75
EP4-40EP4-45EP4-50EP5-14EP5-16EP5-18EP5-20EP5-22EP5-24EP5-26EP5-28EP5-30EP5-35EP5-40EP5-45EP5-50EP6-16EP6-18EP6-20EP6-22EP6-24EP6-26EP6-28EP6-30EP6-35EP6-40EP6-45EP6-50EP6-55EP6-60EP8-20EP8-22EP8-24EP8-26EP8-28EP8-30EP8-35EP8-40
44455555555555556666666666666688888888
4.204.204.205.255.255.255.255.255.255.255.255.255.255.255.255.256.256.256.256.256.256.256.256.256.256.256.256.256.256.258.308.308.308.308.308.308.308.30
4.404.404.405.505.505.505.505.505.505.505.505.505.505.505.505.506.506.506.506.506.506.506.506.506.506.506.506.506.506.508.638.638.638.638.638.638.638.63
4045501416182022242628303540455016182022242628303540455055602022242628242628
3.983.983.984.954.954.954.954.954.954.954.954.954.954.954.954.955.955.955.955.955.955.955.955.955.955.955.955.955.955.957.937.937.937.937.937.937.937.93
4.124.124.125.125.125.125.125.125.125.125.125.125.125.125.125.126.136.136.136.136.136.136.136.136.136.136.136.136.136.138.178.178.178.178.178.178.178.17
7.6 7.6
7.611.511.511.511.511.511.511.511.511.511.511.511.511.516.816.816.816.816.816.816.816.816.816.816.816.816.816.830.030.030.030.030.030.030.030.0
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNEP8-45EP8-50EP8-60EP8-65EP8-70EP8-75EP10-24EP10-26EP10-28EP10-30EP10-35EP10-40EP10-45EP10-50EP10-55EP10-60EP10-65EP10-70EP10-75EP10-80EP10-85EP12-30EP12-35EP12-40EP12-45EP12-50EP12-55EP12-60EP12-65EP12-70EP12-75EP12-80EP12-85EP12-90EP12-95
888888
1010101010101010101010101010101212121212121212121212121212
8.308.308.308.308.308.30
10.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3010.3012.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.3512.35
8.638.638.638.638.638.63
10.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6510.6512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.7512.75
4550606570752426283035404550556065707580853035404550556065707580859095
7.937.937.937.937.937.939.969.969.969.969.969.969.969.969.969.969.969.969.969.969.96
11.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.9011.90
8.178.178.178.178.178.17
10.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2010.2012.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.2212.22
30.030.030.030.030.030.0
-----------------------------
Diameter (ØD) To Fit Hole
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
ØD
L
4-10±0.2512-50±0.5055+ ±0.75
Slotted Spring PinsCarbon Steel, ISO 8752 : 1.5 - 4mm Dia.
SAP
MaterialCarbon Steel (CS70). Other sizes (1 to 20mm diameters)
and lengths plus Inch sizes and selection kits available, P.O.A.
ISO 13337 / DIN 7346 (light duty) available, P.O.A.Minimum Double
Shear Strength: Tested to ISO 8749.
FinishesSlotted spring pins are normally supplied with a plain
oiled finish.Steel pins may be given a protective finish such as
zinc or phosphate, etc but for electrolytically applied finishes it
is essential to de-embrittle the pins immediately after
platingSince the de-embrittlement process is not completely
reliable, non-electrolytic finishes or stainless should be used for
safety-critical applications.Where pins are to be used in plastic
assemblies, it is recommended that they are de-oiled before use to
avoid embrittlement of the plastic.
FeaturesSlotted spring pins consist of a single coil of Spring
Steel with an open slot sufficiently wide to enable the pin to
reduce in diameter as it is driven into a hole of appropriate size.
The ends of the pin have a bevelled chamfer. They are designed for
plain drilled holes but a countersink makes assembly easier. It is
possible to increase the shear strength of slotted pins by
inserting a small diameter inside a large one (inserting the larger
pin first, then the smaller one, taking care that the slot is
between 90° and 180° away from the slot in the larger pin): Outer
pin (Inner pin), 3.5 (2), 5 (3), 6 (3.5), 8 (5), 10 (6), 12 (7), 14
(8), 16 (10), 20 (12).
SAP1.5-4SAP1.5-5SAP1.5-6SAP1.5-8SAP1.5-10SAP1.5-12SAP1.5-14SAP1.5-16SAP1.5-18SAP1.5-20SAP2-5SAP2-6SAP2-8SAP2-10SAP2-12SAP2-14SAP2-16SAP2-18SAP2-20SAP2-22SAP2-24SAP2-26SAP2-28SAP2-30SAP2.5-4SAP2.5-5SAP2.5-6SAP2.5-8SAP2.5-10SAP2.5-12SAP2.5-14SAP2.5-16SAP2.5-18SAP2.5-20SAP2.5-22
1.51.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.5
1.71.71.71.71.71.71.71.71.71.72.32.32.32.32.32.32.32.32.32.32.32.32.32.32.82.82.82.82.82.82.82.82.82.82.8
1.81.81.81.81.81.81.81.81.81.82.42.42.42.42.42.42.42.42.42.42.42.42.42.42.92.92.92.92.92.92.92.92.92.92.9
4568
101214161820
568
1012141618202224262830
4568
10121416182022
1.51.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.5
1.61.61.61.61.61.61.61.61.61.62.12.12.12.12.12.12.12.12.12.12.12.12.12.12.62.62.62.62.62.62.62.62.62.62.6
1.581.581.581.581.581.581.581.581.581.582.822.822.822.822.822.822.822.822.822.822.822.822.822.824.384.384.384.384.384.384.384.384.384.384.38
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNSAP2.5-24SAP2.5-26SAP2.5-28SAP2.5-30SAP3-4SAP3-5SAP3-6SAP3-8SAP3-10SAP3-12SAP3-14SAP3-16SAP3-18SAP3-20SAP3-22SAP3-24SAP3-26SAP3-28SAP3-30SAP3-32SAP3-35SAP3-40SAP3-45SAP3-50SAP4-6SAP4-8SAP4-10SAP4-12SAP4-14SAP4-16SAP4-18SAP4-20SAP4-22SAP4-24SAP4-26
2.52.52.52.53.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.04.04.04.04.04.04.04.04.04.04.04.0
2.82.82.82.83.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.34.44.44.44.44.44.44.44.44.44.44.4
2.92.92.92.93.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.54.64.64.64.64.64.64.64.64.64.64.6
24262830
4568
10121416182022242628303235404550 6 8101214161820222426
3.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.004.004.004.004.004.004.004.004.004.004.004.00
3.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.104.124.124.124.124.124.124.124.124.124.124.12
4.384.384.384.386.326.326.326.326.326.326.326.326.326.326.326.326.326.326.326.326.326.326.326.32
11.2411.2411.2411.2411.2411.2411.2411.2411.2411.2411.24
Diameter (ØD) To Fit Hole
ØD refers to the expanded diameter before insertion.
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
Slotted Spring PinsCarbon Steel, ISO 8752 : 4 - 12mm Dia.
SAP
44444445555555555555555555555666666666666666666666666668888888888
4.44.44.44.44.44.44.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.48.58.58.58.58.58.58.58.58.58.5
4.64.64.64.64.64.64.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.66.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.76.78.88.88.88.88.88.88.88.88.88.8
28303236404550
810121416182022242628303240455055606570758010121416182022242628303236404550556065707580859095
10010121416182022242628
4.004.004.004.004.004.004.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.006.008.008.008.008.008.008.008.008.008.008.00
4.124.124.124.124.124.124.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.126.128.158.158.158.158.158.158.158.158.158.15
11.2411.2411.2411.2411.2411.2411.2417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5417.5426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0426.0442.7642.7642.7642.7642.7642.7642.7642.7642.7642.76
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole
SAP4-28SAP4-30SAP4-32SAP4-36SAP4-40SAP4-45SAP4-50SAP5-8SAP5-10SAP5-12SAP5-14SAP5-16SAP5-18SAP5-20SAP5-22SAP5-24SAP5-26SAP5-28SAP5-30SAP5-32SAP5-40SAP5-45SAP5-50SAP5-55SAP5-60SAP5-65SAP5-70SAP5-75SAP5-80SAP6-10SAP6-12SAP6-14SAP6-16SAP6-18SAP6-20SAP6-22SAP6-24SAP6-26SAP6-28SAP6-30SAP6-32SAP6-36SAP6-40SAP6-45SAP6-50SAP6-55SAP6-60SAP6-65SAP6-70SAP6-75SAP6-80SAP6-85SAP6-90SAP6-95SAP6-100SAP8-10SAP8-12SAP8-14SAP8-16SAP8-18SAP8-20SAP8-22SAP8-24SAP8-26SAP8-28
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kN888888888888888888
1010101010101010101010101010101010101010101010101212121212121212121212121212121212121212121212
8.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.5
10.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.510.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.512.5
8.88.88.88.88.88.88.88.88.88.88.88.88.88.88.88.88.88.8
10.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.810.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.812.8
30323536404550556065707580859095
100120
1618202224262830323536404550556065707580859095
10018202224262830323536404550556065707580859095
100
8.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.00
10.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0010.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.0012.00
8.158.158.158.158.158.158.158.158.158.158.158.158.158.158.158.158.158.15
10.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1510.1512.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.1812.18
42.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7642.7670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.1670.16
104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10104.10
Diameter (ØD) To Fit Hole
SAP8-30SAP8-32SAP8-35SAP8-36SAP8-40SAP8-45SAP8-50SAP8-55SAP8-60SAP8-65SAP8-70SAP8-75SAP8-80SAP8-85SAP8-90SAP8-95SAP8-100SAP8-120SAP10-16SAP10-18SAP10-20SAP10-22SAP10-24SAP10-26SAP10-28SAP10-30SAP10-32SAP10-35SAP10-36SAP10-40SAP10-45SAP10-50SAP10-55SAP10-60SAP10-65SAP10-70SAP10-75SAP10-80SAP10-85SAP10-90SAP10-95SAP10-100SAP12-18SAP12-20SAP12-22SAP12-24SAP12-26SAP12-28SAP12-30SAP12-32SAP12-35SAP12-36SAP12-40SAP12-45SAP12-50SAP12-55SAP12-60SAP12-65SAP12-70SAP12-75SAP12-80SAP12-85SAP12-90SAP12-95SAP12-100
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialA2 Stainless Steel.Other sizes (1 to 20mm diameters) and
lengths plus Inch sizes available, P.O.A. ISO 13337 / DIN 7346
(light duty) available, P.O.A. Selection kits available.Minimum
Double Shear Strength: Tested to ISO 8749.
FeaturesSlotted spring pins consist of a single coil of
Stainless Steel with an open slot sufficiently wide to enable the
pin to reduce in diameter as it is driven into a hole of
appropriate size. The ends of the pin have a bevelled chamfer. They
are designed for plain drilled holes but a countersink makes
assembly easier. It is possible to increase the shear strength of
slotted pins by inserting a small diameter inside a large one
(inserting the larger pin first, then the smaller one, taking care
that the slot is between 90° and 180° away from the slot in the
larger pin):Outer pin (Inner pin), 3.5 (2), 5 (3), 6 (3.5), 8 (5),
10 (6), 12 (7), 14 (8), 16 (10), 20 (12).
SRP1.5-5SRP1.5-6SRP1.5-8SRP1.5-10SRP1.5-12SRP1.5-14SRP1.5-16SRP1.5-18SRP1.5-20SRP2-4SRP2-5SRP2-6SRP2-8SRP2-10SRP2-12SRP2-14SRP2-16SRP2-18SRP2-20SRP2-22SRP2-24SRP2-26SRP2-28SRP2-30SRP2.5-5SRP2.5-6SRP2.5-8SRP2.5-10SRP2.5-12SRP2.5-14SRP2.5-16SRP2.5-18SRP2.5-20
1.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.5
1.71.71.71.71.71.71.71.71.72.32.32.32.32.32.32.32.32.32.32.32.32.32.32.32.82.82.82.82.82.82.82.82.8
1.81.81.81.81.81.81.81.81.82.42.42.42.42.42.42.42.42.42.42.42.42.42.42.42.92.92.92.92.92.92.92.92.9
568
101214161820
4568
1012141618202224262830
568
101214161820
1.51.51.51.51.51.51.51.51.52.02.02.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.5
1.61.61.61.61.61.61.61.61.62.12.12.12.12.12.12.12.12.12.12.12.12.12.12.12.62.62.62.62.62.62.62.62.6
0.980.980.980.980.980.980.980.980.981.811.811.811.811.811.811.811.811.811.811.811.811.811.811.812.842.842.842.842.842.842.842.842.84
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNSRP2.5-22SRP2.5-24SRP2.5-26SRP2.5-30SRP3-5SRP3-6SRP3-8SRP3-10SRP3-12SRP3-14SRP3-16SRP3-18SRP3-20SRP3-22SRP3-24SRP3-26SRP3-28SRP3-30SRP3-32SRP3-35SRP3-40SRP4-6SRP4-8SRP4-10SRP4-12SRP4-14SRP4-16SRP4-18SRP4-20SRP4-22SRP4-24SRP4-26SRP4-28
2.52.52.52.53.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.04.04.04.04.04.04.04.04.04.04.04.04.0
2.82.82.82.83.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.33.34.44.44.44.44.44.44.44.44.44.44.44.4
2.92.92.92.93.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.53.54.64.64.64.64.64.64.64.64.64.64.64.6
22242630
568
1012141618202224262830323540
68
10121416182022242628
2.502.502.502.503.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.003.004.004.004.004.004.004.004.004.004.004.004.004.00
2.602.602.602.603.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.103.104.124.124.124.124.124.124.124.124.124.124.124.12
2.842.842.842.844.074.074.074.074.074.074.074.074.074.074.074.074.074.074.074.074.077.257.257.257.257.257.257.257.257.257.257.257.25
Diameter (ØD) To Fit Hole
ØD
L
4-10±0.2512-50±0.5055+ ±0.75
Slotted Spring PinsStainless Steel, ISO 8752 : 1.5 - 4mm
Dia.
SRP
ØD refers to the expanded diameter before insertion.
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialA2 Stainless Steel.Other sizes (1 to 20mm diameters) and
lengths plus Inch sizes available, P.O.A. ISO 13337 / DIN 7346
(light duty) available, P.O.A. Selection kits available.Minimum
Double Shear Strength: Tested to ISO 8749.
FeaturesSlotted spring pins consist of a single coil of
Stainless Steel with an open slot sufficiently wide to enable the
pin to reduce in diameter as it is driven into a hole of
appropriate size. The ends of the pin have a bevelled chamfer. They
are designed for plain drilled holes but a countersink makes
assembly easier. It is possible to increase the shear strength of
slotted pins by inserting a small diameter inside a large one
(inserting the larger pin first, then the smaller one, taking care
that the slot is between 90° and 180° away from the slot in the
larger pin):Outer pin (Inner pin), 3.5 (2), 5 (3), 6 (3.5), 8 (5),
10 (6), 12 (7), 14 (8), 16 (10), 20 (12).
SRP4-30SRP4-35SRP4-40SRP4-45SRP4-50SRP5-8SRP5-10SRP5-12SRP5-14SRP5-16SRP5-18SRP5-20SRP5-22SRP5-24SRP5-26SRP5-28SRP5-30SRP5-32SRP5-35SRP5-40SRP5-45SRP5-50SRP6-10SRP6-12SRP6-14SRP6-16SRP6-18SRP6-20SRP6-22SRP6-24SRP6-26SRP6-28SRP6-30
444445555555555555555566666666666
4.44.44.44.44.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.45.46.46.46.46.46.46.46.46.46.46.46.4
4.64.64.64.64.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.65.66.76.76.76.76.76.76.76.76.76.76.7
3035404550
8101214161820222426283032354045501012141618202224262830
4.004.004.004.004.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.005.006.006.006.006.006.006.006.006.006.006.006.00
4.124.124.124.124.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.125.126.126.126.126.126.126.126.126.126.126.126.12
7.257.257.257.257.25
10.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7510.7516.1716.1716.1716.1716.1716.1716.1716.1716.1716.1716.17
PartNumber Nom. Min. Max. L Min. Max.
Double Shear
Strength kNDiameter (ØD) To Fit Hole Part
Number Nom. Min. Max. L Min. Max.
Double Shear
Strength
kNSRP6-32SRP6-35SRP6-40SRP6-45SRP6-50SRP8-10SRP8-12SRP8-14SRP8-16SRP8-18SRP8-20SRP8-22SRP8-24SRP8-26SRP8-28SRP8-30SRP8-32SRP8-35SRP8-40SRP8-45SRP8-50SRP10-20SRP10-22SRP10-24SRP10-26SRP10-28SRP10-30SRP10-32SRP10-35SRP10-40SRP10-50
666668888888888888888
10101010101010101010
6.46.46.46.46.48.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.5
10.510.510.510.510.510.510.510.510.510.5
6.76.76.76.76.78.88.88.88.88.88.88.88.88.88.88.88.88.88.88.88.8
10.810.810.810.810.810.810.810.810.810.8
32354045501012141618202224262830323540455020222426283032354050
6.006.006.006.006.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.008.00
10.0010.0010.0010.0010.0010.0010.0010.0010.0010.00
6.126.126.126.126.128.158.158.158.158.158.158.158.158.158.158.158.158.158.158.158.15
10.1510.1510.1510.1510.1510.1510.1510.1510.1510.15
16.1716.1716.1716.1716.1726.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4626.4642.1442.1442.1442.1442.1442.1442.1442.1442.1442.14
Diameter (ØD) To Fit Hole
ØD
L
4-10±0.2512-50±0.5055+ ±0.75
Slotted Spring PinsStainless Steel, ISO 8752 : 4 - 10mm Dia.
SRP
ØD refers to the expanded diameter before insertion.
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
L
ØDH
L
ØDH
MaterialEither Zinc plated or Spring Steel. Also available in
Stainless Steel, P.O.A.
Other Info.Retaining pins are available in two designs - the
single coil for most applications and the double coil for more
demanding use.
SINGLE
COILRPS1.2-22RPS1.6-22RPS1.8-32RPS2-50*RPS2.5-48*RPS3-60*RPS4-60*RPS4.5-90*RPS5-85*RPS6-105RPS7-105RPS8-110
DOUBLE
COILRPD2-50RPD3-62RPD4-78RPD5-92RPD6-120RPD7-130RPD8-130
1.21.61.82.02.53.04.04.55.06.07.08.0
2.03.04.05.06.07.08.0
2225365648727690
102124124128
567292
108138148149
2.02.02.53.04.04.56.57.07.08.0
10.011.0
4.05.06.06.08.09.08.0
1.52.02.22.53.03.54.55.05.57.08.09.0
2.53.54.55.56.58.09.0
5 - 8 6 - 10 8 - 13 9 - 14 9 - 14 10 - 20 16 - 28 20 - 30 20 -
35 28 - 40 28 - 45 30 - 45
8 - 14 14 - 20 17 - 24 18 - 30 24 - 36 26 - 40 24 - 40
PartNumber
Wire Dia.ØD
LengthL
Approx.H
Recommended Hole Dia.
Range of Shaft Dia.
Retaining Pins - ‘R’ ClipsSingle and Double Coil
RPSRPD
RPS Single Coil RPD Double Coil
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialSCP Type: Mild Steel (usually Zinc plated). SCPS Type:
A4 Stainless Steel. Cotter pins are made to DIN94, equivalent to
ISO1234 and BS1574. Also available in Brass (up to 6.3mm dias.),
P.O.A.
Other Info.Zinc plating cannot be applied to the inside faces of
the pin, so Stainless Steel must be used where full corrosion
resistance is required.
Split Cotter PinsDIN 94 (ISO 1234, BS 1574) : To Suit 1 - 2mm
Dia. Holes
SCPSCPS
L
a ØD
SCP1.0-6SCP1.0-8SCP1.0-10SCP1.0-12SCP1.0-16SCP1.0-18SCP1.0-20SCP1.0-22SCP1.0-25SCP1.0-28SCP1.0-32SCP1.0-36SCP1.2-10SCP1.2-12SCP1.2-16SCP1.2-20SCP1.2-22SCP1.2-25SCP1.2-28SCP1.2-32SCP1.2-36SCP1.6-10SCP1.6-12SCP1.6-16SCP1.6-18SCP1.6-20SCP1.6-22SCP1.6-25SCP1.6-28SCP1.6-32SCP1.6-36SCP2.0-10SCP2.0-12SCP2.0-16SCP2.0-18SCP2.0-20SCP2.0-22SCP2.0-25SCP2.0-28SCP2.0-32SCP2.0-36SCP2.0-40SCP2.0-45SCP2.0-50
1.01.01.01.01.01.01.01.01.01.01.01.01.21.21.21.21.21.21.21.21.21.61.61.61.61.61.61.61.61.61.62.02.02.02.02.02.02.02.02.02.02.02.02.0
6
8101216182022252832361012162022252832361012161820222528323610121618202225283236404550
0.80.80.80.80.80.80.80.80.80.80.80.81.11.11.11.11.11.11.11.11.11.31.31.31.31.31.31.31.31.31.31.71.71.71.71.71.71.71.71.71.71.71.71.7
0.90.90.90.90.90.90.90.90.90.90.90.91.01.01.01.01.01.01.01.01.01.41.41.41.41.41.41.41.41.41.41.81.81.81.81.81.81.81.81.81.81.81.81.8
1.61.61.61.61.61.61.61.61.61.61.61.61.71.71.71.71.71.71.71.71.72.42.42.42.42.42.42.42.42.42.43.23.23.23.23.23.23.23.23.23.23.23.23.2
1.81.81.81.81.81.81.81.81.81.81.81.82.02.02.02.02.02.02.02.02.02.82.82.82.82.82.82.82.82.82.83.63.63.63.63.63.63.63.63.63.63.63.63.6
Part Number Steel Stainless
To SuitHole Dia.
LengthL
Min.ØD
Max.ØD
Min.a
Max.a
------------
SCPS1.2-10SCPS1.2-12SCPS1.2-16SCPS1.2-20SCPS1.2-22SCPS1.2-25SCPS1.2-28
--
SCPS1.6-10SCPS1.6-12SCPS1.6-16SCPS1.6-18SCPS1.6-20SCPS1.6-22SCPS1.6-25SCPS1.6-28SCPS1.6-32
-SCPS2.0-10SCPS2.0-12SCPS2.0-16SCPS2.0-18SCPS2.0-20SCPS2.0-22SCPS2.0-25SCPS2.0-28SCPS2.0-32SCPS2.0-36SCPS2.0-40SCPS2.0-45SCPS2.0-50
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialSCP Type: Mild Steel (usually Zinc plated). SCPS Type:
A4 Stainless Steel. Cotter pins are made to DIN94, equivalent to
ISO1234 and BS1574. Also available in Brass (up to 6.3mm dias.),
P.O.A.
Other Info.Zinc plating cannot be applied to the inside faces of
the pin, so Stainless Steel must be used where full corrosion
resistance is required.
Split Cotter PinsDIN 94 (ISO 1234, BS 1574) : To Suit 2.5 - 4mm
Dia. Holes
SCPSCPS
L
a ØD
SCP2.5-10SCP2.5-12SCP2.5-16SCP2.5-18SCP2.5-20SCP2.5-22SCP2.5-25SCP2.5-28SCP2.5-32SCP2.5-36SCP2.5-40SCP2.5-45SCP2.5-50SCP2.5-56SCP2.5-63SCP2.5-71SCP3.2-16SCP3.2-18SCP3.2-20SCP3.2-22SCP3.2-25SCP3.2-28SCP3.2-32SCP3.2-36SCP3.2-40SCP3.2-45SCP3.2-50SCP3.2-56SCP3.2-63SCP3.2-71SCP4.0-16SCP4.0-18SCP4.0-20SCP4.0-22SCP4.0-25SCP4.0-28SCP4.0-32SCP4.0-36SCP4.0-40SCP4.0-45SCP4.0-50SCP4.0-56SCP4.0-63SCP4.0-71
2.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.53.23.23.23.23.23.23.23.23.23.23.23.23.23.24.04.04.04.04.04.04.04.04.04.04.04.04.04.0
1012161820222528323640455056637116182022252832364045505663711618202225283236404550566371
2.12.12.12.12.12.12.12.12.12.12.12.12.12.12.12.12.72.72.72.72.72.72.72.72.72.72.72.72.72.73.53.53.53.53.53.53.53.53.53.53.53.53.53.5
2.32.32.32.32.32.32.32.32.32.32.32.32.32.32.32.32.92.92.92.92.92.92.92.92.92.92.92.92.92.93.73.73.73.73.73.73.73.73.73.73.73.73.73.7
4.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.05.15.15.15.15.15.15.15.15.15.15.15.15.15.16.56.56.56.56.56.56.56.56.56.56.56.56.56.5
4.64.64.64.64.64.64.64.64.64.64.64.64.64.64.64.65.85.85.85.85.85.85.85.85.85.85.85.85.85.87.47.47.47.47.47.47.47.47.47.47.47.47.47.4
Part Number Steel Stainless
To SuitHole Dia.
LengthL
Min.ØD
Max.ØD
Min.a
Max.a
SCPS2.5-10SCPS2.5-12SCPS2.5-16SCPS2.5-18SCPS2.5-20SCPS2.5-22SCPS2.5-25SCPS2.5-28SCPS2.5-32SCPS2.5-36SCPS2.5-40SCPS2.5-45SCPS2.5-50SCPS2.5-56SCPS2.5-63SCPS2.5-71SCPS3.2-16SCPS3.2-18SCPS3.2-20SCPS3.2-22SCPS3.2-25SCPS3.2-28SCPS3.2-32SCPS3.2-36SCPS3.2-40SCPS3.2-45SCPS3.2-50SCPS3.2-56SCPS3.2-63SCPS3.2-71SCPS4.0-16SCPS4.0-18SCPS4.0-20SCPS4.0-22SCPS4.0-25SCPS4.0-28SCPS4.0-32SCPS4.0-36SCPS4.0-40SCPS4.0-45SCPS4.0-50SCPS4.0-56SCPS4.0-63SCPS4.0-71
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialSCP Type: Mild Steel (usually Zinc plated). SCPS Type:
A4 Stainless Steel. Cotter pins are made to DIN94, equivalent to
ISO1234 and BS1574. Also available in Brass (up to 6.3mm dias.),
P.O.A.
Other Info.Zinc plating cannot be applied to the inside faces of
the pin, so Stainless Steel must be used where full corrosion
resistance is required.
Split Cotter PinsDIN 94 (ISO 1234, BS 1574) : To Suit 4 - 6.3mm
Dia. Holes
SCPSCPS
L
a ØD
SCP4.0-80SCP4.0-90SCP4.0-100SCP4.0-112SCP4.0-125SCP5.0-16SCP5.0-18SCP5.0-20SCP5.0-22SCP5.0-25SCP5.0-28SCP5.0-32SCP5.0-36SCP5.0-40SCP5.0-45SCP5.0-50SCP5.0-56SCP5.0-63SCP5.0-71SCP5.0-80SCP5.0-90SCP5.0-100SCP5.0-112SCP5.0-125SCP6.3-20SCP6.3-22SCP6.3-25SCP6.3-28SCP6.3-32SCP6.3-36SCP6.3-40SCP6.3-45SCP6.3-50SCP6.3-56SCP6.3-63SCP6.3-71SCP6.3-80SCP6.3-90SCP6.3-100SCP6.3-112SCP6.3-125SCP6.3-140
4.04.04.04.04.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.06.36.36.36.36.36.36.36.36.36.36.36.36.36.36.36.36.36.3
8090
100112125
16182022252832364045505663718090
100112125
2022252832364045505663718090
100112125140
3.53.53.53.53.54.44.44.44.44.44.44.44.44.44.44.44.44.44.44.44.44.44.44.45.75.75.75.75.75.75.75.75.75.75.75.75.75.75.75.75.75.7
3.73.73.73.73.74.64.64.64.64.64.64.64.64.64.64.64.64.64.64.64.64.64.64.65.95.95.95.95.95.95.95.95.95.95.95.95.95.95.95.95.95.9
6.56.56.56.56.58.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.0
10.310.310.310.310.310.310.310.310.310.310.310.310.310.310.310.310.310.3
7.47.47.47.47.49.29.29.29.29.29.29.29.29.29.29.29.29.29.29.29.29.29.29.2
11.811.811.811.811.811.811.811.811.811.811.811.811.811.811.811.811.811.8
Part Number Steel Stainless
To SuitHole Dia.
LengthL
Min.ØD
Max.ØD
Min.a
Max.a
SCPS4.0-80SCPS4.0-90SCPS4.0-100SCPS4.0-112SCPS4.0-125SCPS5.0-16SCPS5.0-18SCPS5.0-20SCPS5.0-22SCPS5.0-25SCPS5.0-28SCPS5.0-32SCPS5.0-36SCPS5.0-40SCPS5.0-45SCPS5.0-50SCPS5.0-56SCPS5.0-63SCPS5.0-71SCPS5.0-80SCPS5.0-90SCPS5.0-100SCPS5.0-112SCPS5.0-125SCPS6.3-20SCPS6.3-22SCPS6.3-25SCPS6.3-28SCPS6.3-32SCPS6.3-36SCPS6.3-40SCPS6.3-45SCPS6.3-50SCPS6.3-56SCPS6.3-63SCPS6.3-71SCPS6.3-80SCPS6.3-90SCPS6.3-100SCPS6.3-112SCPS6.3-125SCPS6.3-140
https://amironic.co.il/
https://amironic.co.il/
-
M E C H A N I C A L
Product information updated August 2017 and subject to change.
Please click the product links for prices and availability.
MaterialSCP Type: Mild Steel (usually Zinc plated). Cotter pins
are made to DIN94, equivalent to ISO1234 and BS1574. Also available
in Brass (up to 6.3mm dias.), P.O.A.
Other Info.Zinc plating cannot be applied to the inside faces of
the pin so Stainless Steel must be used where full corrosion
resistance is required.
Split Cotter PinsDIN 94 (ISO 1234, BS 1574) : To Suit 8 - 12mm
Dia. Holes
SCPSCPS
L
a ØD
SCP8.0-32SCP8.0-36SCP8.0-40SCP8.0-45SCP8.0-50SCP8.0-56SCP8.0-63SCP8.0-71SCP8.0-80SCP8.0-90SCP8.0-100SCP8.0-112SCP8.0-125SCP8.0-140SCP8.0-160SCP10.0-32SCP10.0-36SCP10.0-40SCP10.0-45SCP10.0-50SCP10.0-56SCP10.0-63SCP10.0-71SCP10.0-80SCP10.0-90SCP10.0-100SCP10.0-112SCP10.0-125SCP10.0-140SCP10.0-160SCP12.0-45SCP12.0-50SCP12.0-56SCP12.0-63SCP12.0-71SCP12.0-80SCP12.0-90SCP12.0-100SCP12.0-112SCP12.0-125SCP12.0-140SCP12.0-160
888888888888888
101010101010101010101010101010131313131313131313131313
32364045505663718090
100112125140160
32364045505663718090
100112125140160
45505663718090
100112125140160
7.37.37.37.37.37.37.37.37.37.37.37.37.37.37.39.39.39.39.39.39.39.39.39.39.39.39.39.39.39.3
12.112.112.112.112.112.112.112.112.112.112.112.1
7.57.57.57.57.57.57.57.57.57.57.57.57.57.57.59.59.59.59.59.59.59.59.59.59.59.59.59.59.59.5
12.412.412.412.412.412.412.412.412.412.412.412.4
13.113.113.113.113.113.113.113.113.113.113.113.113.113.113.116.616.616.616.616.616.616.616.616.616.616.616.616.616.616.621.721.721.721.721.721.721.721.721.721.721.721.7
15.015.015.015.015.015.015.015.015.015.015.015.015.015.015.019.019.019.019.019.019.019.019.019.019.019.019.019.019.019.024.824.824.824.824.824.824.824.824.824.824.824.8
Part Number Steel
To SuitHole Dia.
LengthL
Min.ØD
Max.ØD
Min.a
Max.a
https://amironic.co.il/
https://amironic.co.il/