Applicable Current : Rated Frequency : Output Voltage : Power Supply Voltage : Accuracy : CT Inside Diameter : Max. Applicable Current : Max. Applicable Voltage : Withstanding Voltage : Operating Temperature : Materials : Dimension/Weight : AC 0 ~5A, DC 0 ~±5A DC ~10KHz DC ±4V (at Rated Current) DC ±12V ±1% (F.S.) 16mm 7.5Arms continuous Less than AC/DC 500V for insulated cable AC 1500V/1 minute between CT hole & Output 10~75°C, Less than 80%RH without condensation ±0.1%/°C Ferrite Core & PP Outer Case 31×30×54mm/60g with 15cm lead wire Applicable Current : Rated Frequency : Output Voltage : Power Supply Voltage : Accuracy : CT Inside Diameter : Max. Applicable Current : Applicable Circuit Voltage : Withstanding Voltage : Operating Temperature : Materials : Dimension/Weight : AC 0 ~50A, DC 0 ~±50A DC ~10KHz DC ±4V (at Rated Current) DC ±12V ±1% (F.S.) 16mm 75Arms continuous Less than AC/DC 500V for insulated cable AC 1500V/1 minute between CT hole & Output 10~75°C , Less than 80%RH without condensation ±1%/ °C Ferrite Core & PP Outer Case 31×30×54mm/60g with 15cm lead wire Applicable Current : Rated Frequency : Output Voltage : Power Supply Voltage : Accuracy : CT Inside Diameter : Max. Applicable Current : Applicable Circuit Voltage : Withstanding Voltage : Operating Temperature : Materials : Dimension/Weight : AC 0 ~100A, DC 0 ~±100A DC ~10KHz DC ±4V (at Rated Current) DC ±12V ±1% (F.S.) 16mm 150A continuous Less than AC/DC 500V for insulated cable AC 1500V/1 minute between CT hole & Output 10~75°C, Less than 80%RH without condensation ±1%/ °C Ferrite Core & PP Outer Case 31×30×54mm/80g with 15cm lead wire MODEL SWL-5DC FEATURE Measurement up to AC/DC 5A MODEL SWL-50DC FEATURE Measurement up to AC/DC 50A SPECIFICATIONS MODEL SWL-100DC FEATURE Measurement up to AC/DC 100A SPECIFICATIONS SPECIFICATIONS SPLIT TYPE DC/AC CURRENT SENSOR /CURRENT MEASUREMENTS FOR PWM OR INVERTER (SWL-DC SERIES) NOTICE : Recommend to use the above current transducers for more than 5% of the surroundings. Except SWL-5DC: more than 10%. Remark: Small Size With Stopper Function Wire Function: Red: +12V, Black: -12V, White: Output, Green: COM Power Consumption: Approx. 7mA Standard: RoHs Directive Remark: Small Size With Stopper Function Wire Function: Red: +12V, Black: -12V, White: Output, Green: COM Power Consumption: Approx. 7mA Standard: RoHs Directive Remark: Small Size With Stopper Function Wire Function: Red: +12V, Black: -12V, White: Output, Green: COM Power Consumption: Approx. 7mA Standard: RoHs Directive 020-01-127-003-EH-0614
4
Embed
SPLIT TYPE DC/AC CURRENT SENSOR /CURRENT · PDF filesplit type dc/ac current sensor /current measurements for pwm or inverter (swl-dc series) notice :
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
020-01-127-003-EH-0614.pdf
Applicable Current :Rated Frequency :Output Voltage :Power Supply Voltage :Accuracy :CT Inside Diameter :Max. Applicable Current :Max. Applicable Voltage :Withstanding Voltage :Operating Temperature :
Materials : Dimension/Weight :
AC 0~5A, DC 0~±5ADC~10KHzDC±4V (at Rated Current)DC±12V±1% (F.S.)16mm7.5Arms continuousLess than AC/DC 500V for insulated cableAC 1500V/1 minute between CT hole & Output
10~75°C, Less than 80%RH without condensation±0.1%/°CFerrite Core & PP Outer Case31×30×54mm/60g with 15cm lead wire
Applicable Current :Rated Frequency :Output Voltage :Power Supply Voltage :Accuracy :CT Inside Diameter :Max. Applicable Current :Applicable Circuit Voltage :Withstanding Voltage :Operating Temperature :
Materials :Dimension/Weight :
AC 0~50A, DC 0~±50ADC ~10KHzDC±4V (at Rated Current)DC±12V±1% (F.S.)16mm75Arms continuousLess than AC/DC 500V for insulated cableAC 1500V/1 minute between CT hole & Output
10~75°C , Less than 80%RH without condensation±1%/°CFerrite Core & PP Outer Case31×30×54mm/60g with 15cm lead wire
Applicable Current :Rated Frequency :Output Voltage :Power Supply Voltage :Accuracy :CT Inside Diameter :Max. Applicable Current :Applicable Circuit Voltage :Withstanding Voltage : Operating Temperature :
Materials :Dimension/Weight :
AC 0~100A, DC 0~±100ADC ~10KHzDC±4V (at Rated Current)DC±12V±1% (F.S.)16mm150A continuousLess than AC/DC 500V for insulated cableAC 1500V/1 minute between CT hole & Output
10~75°C, Less than 80%RH without condensation±1%/°CFerrite Core & PP Outer Case31×30×54mm/80g with 15cm lead wire
MODEL SWL-5DC FEATURE Measurement up to AC/DC 5A
MODEL SWL-50DC FEATURE Measurement up to AC/DC 50A
SPECIFICATIONS
MODEL SWL-100DC FEATURE Measurement up to AC/DC 100A
SPECIFICATIONS
SPECIFICATIONS
CT SENSOR GENERAL Ver5_130927.indd 23 2013/09/27 21:06:52
SPLIT TYPE DC/AC CURRENT SENSOR /CURRENT MEASUREMENTS FOR PWM OR INVERTER (SWL-DC SERIES)
NOTICE : Recommend to use the above current transducers for more than 5% of the
surroundings. Except SWL-5DC: more than 10%.
Remark: Small Size With Stopper FunctionWire Function: Red: +12V, Black: -12V, White: Output, Green: COMPower Consumption: Approx. 7mAStandard: RoHs Directive
Remark: Small Size With Stopper FunctionWire Function: Red: +12V, Black: -12V, White: Output, Green: COMPower Consumption: Approx. 7mAStandard: RoHs Directive
Remark: Small Size With Stopper FunctionWire Function: Red: +12V, Black: -12V, White: Output, Green: COMPower Consumption: Approx. 7mAStandard: RoHs Directive
020-01-127-003-EH-0614
020-01-127-003-EH-0614.pdf
Applicable Current :Rated Frequency :Output Voltage :Power Supply Voltage :Accuracy :CT Inside Diameter :Max. Applicable Current :Max. Applicable Voltage :Withstanding Voltage :Operating Temperature :
Materials :Dimension/Weight :
AC 0~200A, DC 0~±200ADC~10KHzDC±4V (at Rated Current)DC±12V± 1% (F.S.)24mm300Arms continuousLess than AC/DC 500V with isulated calbeAC 1500V/1 minute between CT hole & Output
10~75°C , Less than 80%RH without condensation±0.1%/°CFerrite Core & PP Outer Case36×45× 76mm/190g with 15cm lead wire
Applicable Current :Rated Frequency :Output Voltage :Power Supply Voltage :Accuracy :CT Inside Diameter :Max. Applicable Current :Applicable Circuit Voltage:Withstanding Voltage :Operating Temperature :
Materials :Dimension/Weight :
AC 0~500A, DC 0~±500ADC ~10KHzDC±4V (at Rated Current)DC±12V± 1% (F.S.)35mm750Arms continuousLess than AC/DC 500V for isulated cableAC 1500V/1 minute between CT hole & Output
10~75°C , Less than 80%RH without condensation±1%/°CFerrite Core & PP Outer Case60×40×80mm/360g with 15cm lead wire
SPECIFICATIONS
MODEL SWL-200DC FEATURE Measurement up to AC/DC 200A
MODEL SWL-500DC FEATURE Measurement up to AC/DC 500A
SPECIFICATIONS
CT SENSOR GENERAL Ver5_130927.indd 24 2013/09/27 21:06:53
SPLIT TYPE DC/AC CURRENT SENSOR /CURRENT MEASUREMENTS FOR PWM OR INVERTER (SWL-DC SERIES)
NOTICE : Recommend to use the above current transducers for more than 5% of the
kinds of surroundings.
Remark: Small Size With Stopper FunctionWire Function: Red: +12V, Black: -12V, White: Output, Green: COMPower Consumption: Approx. 7mAStandard: RoHs Directive
Remark: Small Size With Stopper FunctionWire Function: Red: +12V, Black: -12V, White: Output, Green: COMPower Consumption: Approx. 7mAStandard: RoHs Directive
020-01-127-003-EH-0614
020-01-127-003-EH-0614.pdf
[EXAMPLE OF CIRCUIT APPLICATION]
E 0
S
R L
n
I 2
I 1
X L
I 2I 1n r
R L E 0
V H
B
I 1
I C
1
3
4 2HS1
1
3
4 2HS 2
-
+A4 OUT
-
+A3
-
+A1
-
+A2
Conductor to be measured
Conductor to be measured
Conductor to be measured
Split Core
The equivalent circuit should be as under, except for leakage reactance
I1=Primary Current (Arms)n=Number of TurnsS=Sectional Area (m 2)
I 2 =Secondary Current r =DC Resistance of coil ( Ω ) R L=Loading(Shunt)Resistance ( Ω )
[PRINCIPLE OF HALL ELEMENT SENSOR]
Hall Element
Core
[EXAMPLE OF CIRCUIT APPLICATION]
E 0
S
R L
n
I 2
X L
I 2I 1n r
R L E 0
V H
B
I 1
I C
1
3
4 2HS1
1
3
4 2HS 2
-
+A4 OUT
-
+A3
-
+A1
-
+A2
to be measured
Conductor to be measured
Conductor to be measured
Split Core
except for leakage reactance
I1=Primary Current (Arms)n=Number of TurnsS=Sectional Area (m 2)
I 2 =Secondary Current r =DC Resistance of coil ( Ω ) R L=Loading(Shunt)Resistance ( Ω )
[PRINCIPLE OF HALL ELEMENT SENSOR]
Hall Element
Core
EXPLANATION OF DC CURRENT SENSOR
DC Current Sensors are based on the combination of cut core and hall element as a magnetic sensor and can detect not only DC but also AC Current continuously.
CT SENSORS FOR DC LINE CURRENT
TECHNICAL INFORMATION
CT SENSOR GENERAL Ver5_130927.indd 16 2013/09/27 21:06:47
converged at the core and will go through the Hallelement located in the gaps of the core. Then, the
Hall element.
020-01-127-003-EH-0614
Competitive sensor & power supply solutions worldwide