한국동력기계공학회지 제22권 제3호 pp. 44-50 2018년 6월 ISSN 1226-7813(Print) ISSN 2384-1354(Online) Journal of the Korean Society for Power System Engineering http://dx.doi.org/10.9726/kspse.2018.22.3.044 Vol. 22, No. 3, pp. 44-50, June 2018 44 한국동력기계공학회지 제22권 제3호, 2018년 6월 1. 서 론 바다를 항해하는 선박의 외부는 해수와 접하므 로, 부식 환경에 항상 노출되어 있다. 이와 같은 환경에 접하는 선박의 외판은 부식을 방지하기 위하여 다양한 방법으로 처리하고 있다. 또한 아 연 도금 강판은 크로메이트 처리하여 부식 억제 를 위하여 사용되었지만, 인체 위험 밑 환경 문제 때문에 사용이 제한되었다. 이것을 대체하기 위하 여 많은 연구자들은 친환경 방청 기술에 관하여 활발한 연구를 실시하였다. 1-6) 저자들도 6가 크롬 대체 코팅 용액인 크롬 프리 코팅액을 개발하고, 아연도금강판에 코팅하여 건조시간 및 경화 온도 에 따르는 특성, 7 7,8) 종류가 다른 코팅액을 개발하 여 경화 온도 및 시간을 달리한 냉연 압연강판의 내식특성, 9-11) 480~720℃에서 예민화한 스테인리스 강(STS310S, STS316L, STS347H)에 Si 폴리실리케 이트를 혼합하여 제조한 유/무기 하이브리드 코팅 액에 의한 내식 특성, 12-14) SiO 2 polysilicate, 우레탄 및 멜라민을 혼합한 유/무기하이브리드 용액을 개 발하여, 자동차의 외판용인 냉연강(SPCC, SPFC590, SPFC780)에 코팅하여 염수분무에 의한 염수분무에 의한 선박용 EH36강의 내식 특성 Corrosion Resistance of EH36 Steel for Ship by Salt Spray 남기우*․이광호**† Ki-Woo Nam* and Kwang-Ho Lee**† (Received 10 March 2018, Revision received 06 June 2018, Accepted 08 June 2018) Abstract: EH36 steel for ships were coated with an organic/inorganic hybrid solution and cured at 190℃ and 210℃. The corrosion resistance was evaluated by salt spray. In addition, the coating layer was evaluated for properties such as adhesion, boiling water resistance, abrasion resistance and pencil hardness. Coating specimens gently increased in corrosion area according to the time of salt spray, but the as-received specimen increased sharply. That is, it is considered that the organic/inorganic hybrid coating solution is effective for corrosion resistance. The specimens cured at 210℃ for 2 minutes and 3 minutes showed the best corrosion resistance. The specimen cured at 190℃ for 2 min also showed good corrosion resistance. Other properties were also excellent. It is considered that the organic/inorganic hybrid solution can be used as corrosion inhibitor of EH36 steel. Key Words:EH36 Steel, Salt Spray, Coating Solution, Organic/Inorganic hybrid Solution, Corrosion Resistance **†이광호(교신저자) : 대우해양조선 특수선 사업부 E-mail : [email protected], Tel : 055-735-2114 *남기우 : 부경대학교 재료공학과 **†Kwang-ho Lee(corresponding author): Daewoo Shipbuilding & Marine Engineering Co., Ltd. E-mail : [email protected], Tel : 055-735-2114 *Ki-Woo Nam: : Department of Materials Science and Engineering, Pukyong National University.
7
Embed
sépkqi!s½uE Io jt &) ZuE^¡pÊ ¦o $PSSPTJPO3FTJTUBODFPG ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
한국동력기계공학회지 제22권 제3호 pp. 44-50 2018년 6월 ISSN 1226-7813(Print) ISSN 2384-1354(Online)Journal of the Korean Society for Power System Engineering http://dx.doi.org/10.9726/kspse.2018.22.3.044Vol. 22, No. 3, pp. 44-50, June 2018
44 한국동력기계공학회지 제22권 제3호, 2018년 6월
1. 서 론
바다를 항해하는 선박의 외부는 해수와 접하므
로, 부식 환경에 항상 노출되어 있다. 이와 같은
환경에 접하는 선박의 외판은 부식을 방지하기
위하여 다양한 방법으로 처리하고 있다. 또한 아
연 도금 강판은 크로메이트 처리하여 부식 억제
를 위하여 사용되었지만, 인체 위험 밑 환경 문제
때문에 사용이 제한되었다. 이것을 대체하기 위하
여 많은 연구자들은 친환경 방청 기술에 관하여
활발한 연구를 실시하였다.1-6) 저자들도 6가 크롬
대체 코팅 용액인 크롬 프리 코팅액을 개발하고,
아연도금강판에 코팅하여 건조시간 및 경화 온도
에 따르는 특성, 77,8)종류가 다른 코팅액을 개발하
여 경화 온도 및 시간을 달리한 냉연 압연강판의
내식특성,9-11) 480~720℃에서 예민화한 스테인리스
강(STS310S, STS316L, STS347H)에 Si 폴리실리케
이트를 혼합하여 제조한 유/무기 하이브리드 코팅
액에 의한 내식 특성,12-14) SiO2 polysilicate, 우레탄
및 멜라민을 혼합한 유/무기하이브리드 용액을 개
발하여, 자동차의 외판용인 냉연강(SPCC,
SPFC590, SPFC780)에 코팅하여 염수분무에 의한
염수분무에 의한 선박용 EH36강의 내식 특성
Corrosion Resistance of EH36 Steel for Ship by Salt
Spray
남기우*․이 호**†
Ki-Woo Nam* and Kwang-Ho Lee**†
(Received 10 March 2018, Revision received 06 June 2018, Accepted 08 June 2018)
Abstract: EH36 steel for ships were coated with an organic/inorganic hybrid solution and cured at 190℃
and 210℃. The corrosion resistance was evaluated by salt spray. In addition, the coating layer was
evaluated for properties such as adhesion, boiling water resistance, abrasion resistance and pencil hardness.
Coating specimens gently increased in corrosion area according to the time of salt spray, but the
as-received specimen increased sharply. That is, it is considered that the organic/inorganic hybrid coating
solution is effective for corrosion resistance. The specimens cured at 210℃ for 2 minutes and 3 minutes
showed the best corrosion resistance. The specimen cured at 190℃ for 2 min also showed good corrosion
resistance. Other properties were also excellent. It is considered that the organic/inorganic hybrid solution