Space feature list_6_0

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

Y

customer definable context data (LDS) N

control chart setup by any context key combination (SPC channel filter criteria), e.g. by recipe, tool or

product, operation, partY

support compressed (mean, S, min, max, n) and raw values data Y

sub-charts (CKCs) and summary charts (channel) Y

automatic creation of CKCs Y

display violations in CKCs in channel chart Y

go from channel to CKC chart and vice versa Y

chart types Y

offline charts Y

online charts Y

variables charts Y

mean charts Y

range charts Y

sigma charts (standard deviation) Y

raw value charts Y

Moving median chart Y

MA charts (moving average) Y

MS charts (moving sigma) Y

EWMA(M) charts for mean values (Exponential Weighted Moving Average) Y

EWMA(S) charts for sigma values Y

EWMA(R) charts for range values Y

attributive charts Y

c charts for nonconformities Y

np charts for number nonconforming Y

p charts for fraction nonconforming Y

u charts for average number of nonconformities Y

attributive detail counts new Y

defect/failure type new Y

location new Y

cause new Y

stackbar display of detail counts new Y

pareto of details counts by type/location/cause and any combination of them new Y

multiparameter charts (MPCs), define and display groups of related charts together N

normalized charts: normalization to specification limits, target or control limits Y

moving chart calculation start reset from online and offline chart Y

graphical moving chart reset indicators and cursor info comments new Y

additional annotations capability to display information from other systems in control chart new Y

control limit and process index calculations Y

with SPACE calculation Y

with customer plugin Y

with qs-STAT (optional) N

violation rules Y

complete check against all violation rules Y

Raw above specification (1) Y

Raw below specification (2) Y

Mean above control limit (3) Y

Mean below control limit (4) Y

SPC

www.camline.com Last Update: 7-Sep-2007 Page 1 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

Sigma above control limit (5) Y

Range above control limit (6) Y

Trend Up (Regression) (7) Y

Trend Down (Regression) (8) Y

Run Up (9) Y

Run Down (10) Y

EWMA(Mean) above control limit (11) Y

EWMA(Mean) below control limit (12) Y

MA above control limit (13) Y

MA below control limit (14) Y

MS above control limit (15) Y

MS below control limit (16) Y

Sigma below control limit (17) Y

Range below control limit (18) Y

Sigma Run Up (19) Y

Range Run Up (20) Y

N of M in Zone A Upper (21) Y

N of M in Zone A Lower (22) Y

N of M in Zone A or B Upper (23) Y

N of M in Zone A or B Lower (24) Y

N inside Zone C (25) Y

N outside Zone C (26) Y

N in a rising row (27) Y

N in a falling row (28) Y

EWMA(Sigma) above control limit (30) Y

EWMA(Sigma) below control limit (31) Y

EWMA(Range) above control limit (32) Y

EWMA(Range) below control limit (33) Y

N[%] Raw above specification (34) Y

N[%] Raw below specification (35) Y

N[%] Raw above control limit (36) Y

N[%] Raw below control limit (37) Y

Raw above control limit (38) Y

Raw below control limit (39) Y

Mean above specification (40) Y

Mean below specification (41) Y

N MA in a rising row (42) Y

N MA in a falling row (43) Y

MS Run Up (44) Y

N Mean alternating (50) Y

N Sigma alternating (51) Y

N Range alternating (52) Y

Repeated violation 1 (60): configurable Y

Repeated violation 2 (61): configurable Y

Repeated violation 3 (62): configurable Y

Repeated violation 4 (63): configurable Y

acceptance of data without specification limits Y

violation handling Y

www.camline.com Last Update: 7-Sep-2007 Page 2 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

popup chart with Y

www.camline.com Last Update: 7-Sep-2007 Page 3 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

TSGs (trouble shooting guides) Y

CAs (corrective actions) Y

alarms Y

violation comment request Y

email notification Y

email containing information based on template N

mailing list administration N

email comprises comprehensive automatically generated SPC information Y

clicking a link in the email opens the related offline chart Y

for each valuator violation: receivers of email and/or chart can be defined Y

actions triggered by violations can be set up specific to chart and type of violation Y

search for samples with certain violations N

automated actions can be triggered (see Integration) N

changeable chart filter condition Y

without loosing old data Y

mark data that does not fit new filter Y

allow to set up charts after data has been sent without loosing data Y

Y

sub-charts (CKCs) and summary charts (channel) Y

automatic creation of CKCs Y

display violations in CKCs in channel chart Y

go from channel to CKC chart and vice versa Y

display CKC limits in channel chart new Y

charts of freely definable queries N

matching charts for quick, graphical comparison analysis N

store frequently used factor combinations as matching definitions N

default matching definition for one-button switch to comparative matching view N

toggle on/off specific matching (factor) combinations N

store excluded matching combinations permanently on chart level N

sort data in chart by matching combinations for improved comparative viewing new N

overlay mode for display of Mean/EWMA(M), Range/EWMA(R) or Sigma/EWMA(S) values Y

display of online charts always, never, only with violations, or on demand Y

raw values Y

box & whisker plot Y

in-a-row display Y

stacked display Y

attributes on raw value level Y

x-axis Y

by sample number Y

by sample data Y

configurable x-tic labels, common x-tic label or per chart Y

histogram: continuous or by classes, with or without normal distribution line Y

configurable structured display of information about selected sample (cursor info) Y

tool tips in chart display selected information items directly on sample under cursor new Y

grid Y

configurable chart type names Y

zoom Y

Charting & Analysis

www.camline.com Last Update: 7-Sep-2007 Page 4 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

history data selection Y

www.camline.com Last Update: 7-Sep-2007 Page 5 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

flagging of samples Y

sample flag for out-of-order (not collected chronologically) Y

sample flag for WE rule violation Y

manual flagging of outliers Y

graphical decoration flags for SPC rule violations Y

violation-type specific graphical/text decorations new Y

different violation decorators for same/other statistc chart type Y

different violation decorators for channel/CK violations Y

configurable shape and color, text and thickness for each decoration type Y

raw value drill-down on any sample Y

chart scaling Y

by fixed values Y

logarithmic scaling Y

by sample values Y

by specification limits Y

by control limits Y

sample history displays information of all samples with selected key values Y

show chart for sample selected in sample history Y

specification limit display Y

control limit display: old and calculated control limit lines Y

visual chart setup can be stored and re-used directly Y

data export to offline data analysis tools Y

qs-STAT export format Y

plain text (SAS) export format Y

CSV (MS Excel) Y

Y

outlier detection and removal N

control limit calculation wizard to quickly review and recalculate many chart limits Y

calculation with a quick selection of calculation strategies (formulas) Y

plug-in architecture for customer-specific calculation methods and process indexes Y

non-normal distribution models N

folded normal distribution (qs-STAT only) N

Johnson transformation new N

log-normal distribution new N

mixed distribution (qs-STAT only) N

Weibull distribution new N

Rayleigh distribution (qs-STAT only) N

Pearson distribution system (qs-STAT only) N

Gamma distribution new N

extended normal distribution new N

box-cox transformation (qs-STAT only) N

root transformed normal distribution (qs-STAT only) N

process capability calculation methods new N

ISO 21747 M1_1,4 (standard textbook 6-sigma method) new N

ISO 21747 M1_1,6 (quantile method using mean value for location) new N

ISO 21747 M1_2,6 (quantile method using median for location) new N

ISO 21747 M1_3,6 (quantile method 50% quantile for location) new N

Calculations

www.camline.com Last Update: 7-Sep-2007 Page 6 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

ISO 21747 M1_4 (fraction nonconforming) new N

Kane's modified Cpk with off-target deprecation new N

Pp, Ppk (using within-sample variation only) new N

process index calculation

one process index for each valuation type Y

1000 average (arithm. mean) x-bar Y

1021 mean of std. deviations Y

1023 mean of ranges Y

1100 median x-tilde Y

1200 minimum value min(x) Y

1300 maximum value max(x) Y

2100 standard deviation S Y

2110 std. dev. of x-bar Y

2300 range R Y

3000 skewness g1 Y

3200 kurtosis b2 Y

3400 excess g2 Y

3511 number reference units Y

3512 mean size of ref. unit Y

3513 min size of ref. unit Y

3514 max size of ref. unit Y

3515 total no.of defects Y

3520 defective percentage Y

3521 p minimum Y

3522 p maximum Y

4201 percentile(1%) N

4202 percentile(2%) N

... N

4299 percentile(99%) N

4613 Epps-Pulley test for normal distribution new N

4700 comparison of variances F[ch] Y

4711 % variance within samples Y

4721 % variance between samples Y

5001 number of values < LSL Y

5005 expected ratio p(tot)[%] Y

5010 Lower Critical capability index Y

5101 number of values > USL Y

5110 Upper Critical capability index Y

5210 capability index Cp Y

5220 critical capability index Cpk Y

5301 Capability calculation method new N

5506 % of values < LSL Y

5516 % of values > USL Y

5520 number of values in spec Y

5526 % of values in spec Y

5530 number of values out of spec Y

5536 % of values out of spec Y

6000 model distribution ND(<>) Y

www.camline.com Last Update: 7-Sep-2007 Page 7 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

6100 transformation Y

www.camline.com Last Update: 7-Sep-2007 Page 8 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

6301 total values n(tot) Y

6302 values evaluated n(eff) Y

6303 first evaluated sample Y

6350 number of outlier raw values new N

6351 number of lower outlier raw values new N

6352 number of upper outlier raw values new N

6400 sample size n(smp) Y

6401 total number of samples k(tot) Y

6402 samples evaluated k(eff) Y

6404 last evaluated sample Y

6409 eliminated outliers k(el) N

7244 lower spec. limit Y

7245 upper spec. limit Y

8011 target value Y

8910 unstability N

13520 p confidence region Y

15210 Cp confidence region Y

15213 Cp conf. upper Y

15214 Cp conf. lower Y

15220 Cpk confidence region Y

15223 Cpk conf. lower Y

15224 Cpk conf. upper Y

50004 first sample date Y

50005 last sample date Y

50102 % Violations Y

50103 % Out of specification Y

50104 % Out of control limits Y

50105 % Sensitizing rule violations Y

50109 #Flagged samples new N

50110 no. of violations of valuator 1 Y

... Y

50172 no. of violations of valuator 63 Y

50106 % Not-commented Y

50180 Customer Field 00 Y

50181 Customer Field 01 Y

... Y

50199 Customer Field 19 Y

50808 Epps-Pulley normality test for log-normal data new N

50824 Epps-Pulley normality test for mean values new N

Y

offline chart calculation Y

fixed limits and limits depending on number of points for moving charts Y

engineering limits (are not overwritten by re-calculation) Y

limit offsets for EWMA(Mean) and MA Y

automated calculation after n samples (prerun) N

control limit checks Y

upper confidence limit Cp < demand Y

Cp < demand Y

Control Limits

www.camline.com Last Update: 7-Sep-2007 Page 9 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

lower confidence limit Cp < demand Y

www.camline.com Last Update: 7-Sep-2007 Page 10 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

upper confidence limit Cpk < demand Y

Cp < demand Y

lower confidence limit Cpk < demand Y

mean value control limits out-of-specification Y

location or variation chart not stable N

prerun values with violations Y

> 10 % prerun values with violations Y

CKC limits tighter than channel limits Y

new control limits tighter than current limits Y

Y

built-in formulas and transformations Y

Trigger - Reference [TransformedSpec] Y

Reference - Trigger [TransformedSpec] Y

Trigger + Reference [TransformedSpec] Y

Trigger * Reference [TransformedSpec] Y

Sum of N [TransformedSpec] Y

Trigger / Reference [TransformedSpec] Y

1 / Trigger [TransformedSpec] Y

(Max - Min) / (Max + Min) Y

(X - mu) / sigma [TriggerSpec] [TransformedSpec] Y

c * log(aX + b) [TransformedSpec] Y

log(IQR-filter(x)) [TransformedSpec] [f=<IQR_factor>] Y

2 * (X - T) / (USL - LSL) Y

Unit Transformation Y

customer-specific calculated parameters with ACO module (Advanced Calculation Option) N

Dashboards new N

near-realtime refresh new N

web based new N

high-level overview new N

customer-definable aggregation/drilldown trees new N

web based configuration wizard new N

active notificaiton upon data collection interval time-out new N

distinction between critical and monitoring charts new N

plugin support for custom classification rules new N

personalized selection of dashboards ("My dashboards") new N

chart-specific dashboard settings new N

age-out interval to differentiate high frequency from low-frequency charts new N

data collection interval N

dashboard window size for violation counts new N

dashboard window size for short-term Cpk new N

collection interval time-out notification receiver new N

chart overviews new N

multi-level aggregation/drilldow (by area, tool type, product, etc.) new N

by process capability class new N

by process stability class new N

by data collection frequency new N

by invalid measurement flag rate new N

chart classification count paretos analysis (by area, tool type, product, process, etc.) new N

Calculated Parameters

www.camline.com Last Update: 7-Sep-2007 Page 11 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

violation overviews new N

www.camline.com Last Update: 7-Sep-2007 Page 12 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

multi-level aggregation/drilldow (by area, tool type, product, etc.) new N

specification limit violations new N

control limit violation new N

other rule violations new N

not commented violations new N

violation count pareto analysis (by tool, recipe, product etc) new N

pareto drill down new N

chart detail list new N

boxplot comparison new N

filter/sort new N

hyperlink to offline chart new N

color-coded cells highlight problem metrics new

Cpk (short-term) new N

Cpk target new N

#violations by type new N

%violations target new N

# flagged invalid data points in dashboard window new N

number samples/raw values in dashboard window new N

oldest/newest sample date in dashboard window new N

mean/stdev/min/max/spec/quartiles new N

violation detail list new N

direct violation annotation in web page new N

direct flag action in web page new N

multi-selection support for annotation/flag actions new N

hyperlink to specific sample in offline chart new N

N

report scheduler N

daily, weekly, monthly, or quarterly calculated reports N

free reports at a definable time N

user-definable report cycles (e.g. Bi-weekly, every 8 hours ...) N

automatic re-calculation N

priorities N

rolling report with original and extended time period N

freely definable queries N

definable number of samples N

definable time interval N

configurable process index list to calculate and display N

result visualization N

comparison report N

trend report N

category trend (percentage development) report N

trend / comparison combined report N

comparison in navigator tree with link to offline chart N

report export N

in PDF format N

in HTML (Web) format N

in RTF (Rich Text Format) N

in CSV (MS Excel) format N

Reporting

www.camline.com Last Update: 7-Sep-2007 Page 13 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

search for specific report results N

www.camline.com Last Update: 7-Sep-2007 Page 14 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

Web reporting – Browser access to reports N

Customer-specific reporting hooks for publishing to data warehouse etc. N

Y

nested folders of arbitrary depth new N

specification limit administration through spec channels Y

start of SPACE applications via Java Web Start screen Y

inheritable attributes Y

manual update of many charts with search and "copy & paste" of attributes Y

bookmarks N

data browser Y

quick filter Y

sort by any column Y

wildcards Y

version control – audit trail N

view previous revisions N

compare revisions N

revert to previous revisions N

track who changed N

track when changed N

track what was changed (automatic change type detection) N

track why it was changed (comment) N

undelete support new N

important objects are only marked as deleted, but remain in database new N

accidentally deleted objects can be restored without data loss new N

deleted objects display can be toggled on/off in administration GUI new N

special permissions exist for viewing, restoring and permanently deleting marked objects new N

customer fields N

searches N

charts can be deleted directly from the search results N

search for calculated parameters with certain properties N

search for charts for certain parameters N

search for charts of certain divisions N

search for charts of certain names N

search for charts of certain owners N

search for charts sent to certain computers N

search for charts with certain control limits enabled or disabled N

search for charts with certain evaluations N

search for charts with certain key value combinations N

search for charts with changes at/before/after a certain time N

search for charts with no samples N

search for charts with notifications to certain email addresses N

search for charts with or without certain properties N

search for charts with report results with certain process index values in a certain time interval N

search for charts with samples newer than a certain date N

search for charts with samples older than a certain date N

search for charts with(out) certain comments N

search for charts with(out) certain corrective actions N

search for charts with(out) certain flags N

Administration

www.camline.com Last Update: 7-Sep-2007 Page 15 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

search for multiparameter charts with certain properties N

www.camline.com Last Update: 7-Sep-2007 Page 16 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

search for queries with certain properties N

search for samples collected in a certain period of time N

search for samples for certain parameters N

search for samples of certain divisions N

search for samples of certain owners N

search for samples with certain key value combinations N

search for samples with certain violations N

search for samples with changes at/before/after a certain time N

search for samples with(out) certain comments N

search for samples with(out) certain corrective actions N

search for samples with(out) certain flags N

search for spec channels with certain properties N

search for report results N

search for reports for certain parameters N

Y

user administration Y

various permissions on each object Y

each object belongs to an owner and a division Y

in each division, the user has defined permissions on each object Y

account options new Y

user must change password on next logon new Y

enable/disable account new Y

expire after n days new Y

remind password change new Y

force password change new Y

password quality enforcement new Y

minimum length configurable new Y

must contain digits (yes/no) new Y

must contain upper and lower case characters new Y

must contain special characters new Y

must not appear in dictionary (user-provided list) new Y

must be different than last <n> passwords new Y

fraud detection and protection new Y

automatically disable account after n consecutive logon failures new Y

auomatic system administrator notification when account was disabled due to login failure new Y

electronic signatures new Y

Archiving new N

archiving modes new N

archiving by serial tracking numbers new N

archiving by time interval (week) and key (process tool) new N

XML schema archive file format new N

zip compression option for archive files new N

archived data contains settings valid at the time the data was sent to SPACE new N

which SPC rules were enabled new N

who was notified new N

which specification and control limits were valid new N

support for batch processes (data associated with list of serial numbers) new N

support for updates on already archived data new N

Security

www.camline.com Last Update: 7-Sep-2007 Page 17 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

indexing of archive files by one or multiple keys new N

archive flag new N

avoids multiple archiving of same data new N

avoids cleanup of not yet archived data new N

Y

SPACE Listener N

SPISE Y

C, C++, Java, Visual Basic ... Y

CSV import Y

Navigator automation Y

goto chart Y

searches N

export Y

SPACE API to automate N

chart setup N

specifications management new N

calculated characteristics setup new N

folders setup N

bookmarks setup N

multi-parameter charts setup N

corrective actions setup N

trouble shooting guides setup N

alarms setup N

control limit management N

control limit calculation new N

process index calculation new N

supported MES interfaces Y

SiView Y

FACTORYworks Y

300works Y

WorkStream Y

PROMIS Y

additional annotations plugin capability to displays foreign system events in control charts new N

Y

keyboard shortcuts Y

multibyte character support Y

all colors, fonts, and drawing styles configurable Y

multi-language GUI Y

english Y

chinese Y

japanese (optional) Y

german Y

Y

redundant servers Y

dynamic load balancing Y

5 samples/second/server Y

50 samples/second/server with bulk data loading (multiple points into same chart) Y

Integration

Usability

Performance

www.camline.com Last Update: 7-Sep-2007 Page 18 of 19

LineWorks SPACE 6.0 FeaturesNew

SPACE 6 Basic

cluster failover support Y

customer installations up to 200.000 charts Y

customer installations up to 200 million raw values Y

customer installations up to 20 million samples Y

support for separate history database with longer data retention period Y

Y

client supports MS Windows 2000 operating system Y

client supports MS Windows XP operating system Y

server supports HP-UX 11i operating system Y

server supports HP-UX 11.11 operating system Y

server supports HP-UX 11.23 operating system Y

server supports IBM AIX 4.3.3 operating system Y

server supports MS Windows 2000 operating system Y

server supports MS Windows 2003 operating system Y

server supports MS Windows XP operating system Y

server supports Sun Solaris 9 operating system Y

server supports Sun Solaris 10 operating system new Y

server supports SuSE Linux Enterprise Server 9 operating system Y

server supports SuSE Linux Enterprise Server 10 operating system new Y

support of COM middleware (via CAPS OLE Gateway) Y

support of CORBA/IIOP middleware Y

support of Oracle 9i database Y

support of Oracle 10g database new Y

support of TIB/Rendezvous TIBCO Load Balancing middleware Y

System Requirements

www.camline.com Last Update: 7-Sep-2007 Page 19 of 19