This is the largest transportation infrastructure project in the state’s history, creat- ing 13,800 jobs. By Jill Bleed ASSOCIATED PRESS LITTLE ROCK, Ark. (AP) Arkansas voters will be asked to raise the state’s sales tax by one-half cent in exchange for a $1.8 billion highway improvement program that backers say will create 40,000 jobs and build four-lane highways to link much of the state. Commercials in favor of Issue 1 began airing in Little Rock, Fort Smith, Fayetteville and Jonesboro, even though the ballot measure has drawn no organized opposition. Move Arkansas Forward, the group formed to campaign in favor of the measure, has budgeted $600,000 to air the 30-second ads in the state’s major markets. “The upcoming election gives Arkansas voters one vote for more jobs,” the ad’s narrator said. “One vote for safer roads. One vote for four-lane highways connecting all parts of the state. And one vote for a better Arkansas economy without raising taxes on groceries, medicine or gasoline.” The campaign has raised more than $700,000 and hopes to reach more than $1 million, Move Arkansas Forward spokesman Craig Douglass said. The amendment calls for the authorization of $1.3 billion in bonds to fund highway projects. Those bonds would be paid for by a half-cent sales- tax increase that, if approved, would increase Arkansas’ state sales tax to 6.5 percent from 6 per- cent. The tax would end when the bonds are paid off, which is expected to take no more than 10 years. Half-Cent Tax for Highways on Ark. Ballot By Lori Lovely CEG CORRESPONDENT It may not be Bermuda, but some of North Carolina’s commuters might feel a little lost when the state’s first toll road opens next year. The 18.8-mi. (30.2 km) six-lane divided highway near Raleigh-Durham is designed to provide relief from congestion on existing routes between the Research Triangle Park business area and west- ern Wake County to the south. First proposed back in 1958 when Research Triangle Park was created, the Parkway is being built on a corridor of land preserved from development specifically for the roadway’s eventual First Proposed in ’58, Triangle Project Proceeding in Earnest Coastal Equipment Holds Open House in Va. …8 Cat Auctions, Carter Machinery Hold Sale…66 Linder Hosts Oktoberfest in Lakeland…14 Inside “The Nation’s Best Read Construction Newspaper… Founded 1957.” ® Southeast Edition $3.00 Because of time and lane restrictions, some work was done on nights and weekends, mostly during the summer between Memorial Day and Labor Day. Two concrete paving seasons were coordinated at night to take advantage of cool- er temperatures and for better productivity. Published Nationally October 31, 2012 • Vol. XXV • No. 22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 www.constructionequipmentguide.com Construction employers added 5,000 jobs in September while the industry’s unemploy- ment rate hit 11.9 percent, according to an analysis of new federal data released Oct. 5 by the Associated General Contractors of America. Association officials cautioned that construction employment has been relatively flat for more than a year as growing demand for residential and some commercial projects has been offset by declining public sector construction activity. “Despite the slight uptick in construction employment for the past month, the industry is a bit smaller than it was one year ago,” said August, September See Employment Increase see EMPLOYMENT page 72 see TAX page 22 see EXPRESSWAY page 24 Table of Contents ............4 Crawler Loaders, Dozers, Undercarriages & Parts Section ......................29-35 Paving Section ........37-50 Parts Section ................51 Business Calendar ........54 Auction Section ......66-75 Advertisers Index ..........74
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This is the largest transportation infrastructure project in the state’s history, creat-ing 13,800 jobs.
By Jill BleedASSOCIATED PRESS
LITTLE ROCK, Ark. (AP) Arkansas voters willbe asked to raise the state’s sales tax by one-halfcent in exchange for a $1.8 billion highwayimprovement program that backers say will create40,000 jobs and build four-lane highways to linkmuch of the state. Commercials in favor of Issue 1 began airing in
Little Rock, Fort Smith, Fayetteville and Jonesboro,even though the ballot measure has drawn noorganized opposition. Move Arkansas Forward, thegroup formed to campaign in favor of the measure,has budgeted $600,000 to air the 30-second ads inthe state’s major markets. “The upcoming election gives Arkansas voters
one vote for more jobs,” the ad’s narrator said.“One vote for safer roads. One vote for four-lanehighways connecting all parts of the state. And onevote for a better Arkansas economy without raisingtaxes on groceries, medicine or gasoline.” The campaign has raised more than $700,000
and hopes to reach more than $1 million, MoveArkansas Forward spokesman Craig Douglass said. The amendment calls for the authorization of
$1.3 billion in bonds to fund highway projects.Those bonds would be paid for by a half-cent sales-tax increase that, if approved, would increaseArkansas’ state sales tax to 6.5 percent from 6 per-cent. The tax would end when the bonds are paid off,
which is expected to take no more than 10 years.
Half-Cent Tax for Highways on Ark. Ballot
By Lori LovelyCEG CORRESPONDENT
It may not be Bermuda, but some ofNorth Carolina’s commuters mightfeel a little lost when the state’s first tollroad opens next year. The 18.8-mi.(30.2 km) six-lane divided highwaynear Raleigh-Durham is designed toprovide relief from congestion onexisting routes between the ResearchTriangle Park business area and west-ern Wake County to the south.First proposed back in 1958 when
Research Triangle Park was created,the Parkway is being built on a corridorof land preserved from developmentspecifically for the roadway’s eventual
First Proposed in ’58, TriangleProject Proceeding in Earnest
Coastal Equipment Holds
Open House in Va. …8
Cat Auctions, Carter
Machinery Hold Sale…66
Linder Hosts Oktoberfest
in Lakeland…14
Inside
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® SoutheastEdition
$3.00
Because of time and lane restrictions, somework was done on nights and weekends, mostlyduring the summer between Memorial Day andLabor Day. Two concrete paving seasons werecoordinated at night to take advantage of cool-er temperatures and for better productivity.
Published Nationally
October 31, 2012 • Vol. XXV • No.22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
Construction employers added 5,000 jobsin September while the industry’s unemploy-ment rate hit 11.9 percent, according to ananalysis of new federal data released Oct. 5 bythe Associated General Contractors of
America. Association officials cautioned thatconstruction employment has been relativelyflat for more than a year as growing demandfor residential and some commercial projectshas been offset by declining public sector
construction activity.“Despite the slight uptick in construction
employment for the past month, the industryis a bit smaller than it was one year ago,” said
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send addresschanges to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.
IN THIS ISSUESPECIAL SECTION…CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTSBe sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers,undercarriages and parts.
FEATURES…COASTAL EQUIPMENT HOLDS OPEN HOUSE INVIRGINIA BEACHMany machines were on display, a hearty lunch was served and doorprizes were given away with a large flat screen television being thegrand prize.
STRIBLING MAKES LARGE ACQUISITIONStribling Equipment’s operations for John Deere Construction and Forestrynow encompass all of Mississippi, Arkansas, the 21 western counties ofTennessee and four eastern counties of Texas and Oklahoma.
LINDER HOSTS FIRST ANNUAL OKTOBERFEST INLAKELAND, FLA.More than 50 machines were on display from various manufacturers, giv-ing Linder’s staff the opportunity to show customers a large portion of theequipment they represent.
JOHN PAYNE JOINS HILLS MACHINERY ASTERRITORY REP.Payne joins the Hills Machinery team with nearly 30 years experience inthe industry under his belt.
LOW BID ON MISS. BRIDGE HITS $7.4MThe lowest bid to build a bridge over the Natchez Trace Parkway came in$1.4 million higher than expected.
ROAD CONNECTION TOUR WINDS UP ATKPI-JCI EVENTA celebratory rally was held at Kolberg Pioneer Inc. (KPI) headquarters tobring closure to this comprehensive advocacy campaign.
CAT AUCTION SERVICES HOLDS SALE WITH CARTERMACHINERYBidders gathered Oct. 18to vie for a variety of equipment and other itemsfor the construction and mining industries and to catch up with friends andcolleagues from around the area as well as from out of state.
18
19
20
66
14
10
8
29
54 BUSINESS CALENDAR62 COMING AUCTIONS64 CLASSIFIEDS
EQUIPMENT…
56 BOBCAT T7650 Compact Track Loader
14
29
20
8
66
®
Mobile LinkedIn Facebook Twitter YouTube
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 5
QUALITY USED EQUIPMENT AT COMPETITIVE PRICES!Call Jill Penderghest, Asst. Used Equipment Manager O: 904.494.1436 | C: 904.803.2909
Browse our complete used inventory at used.ringpower.com
Page 6 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FLORIDASt. Augustine904.737.7730
Pompano Beach954.971.9440
Tampa/Orlando407.855.6195
Miami (International Sales)305.477.8717
GEORGIAUnion City770.774.7300
NORTH CAROLINAConcord704.795.3636
SOUTH CAROLINALadson843.818.1954
Ring Power Crane offers premier machines from America’s leading crane manufacturers, including Manitowoc, Grove, National Crane, Broderson, Manitex and Tadano Boom Trucks and serves from the Southeastern United States to the Caribbean and Latin America.
WANTED: LATE MODEL USED CRANES! All Brands Considered.Keith Summerlin
O: 904.494.1416 | C: 904.814.1184Dave Glass
O: 904.494.7650 | C: 404.310.0824
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 7
Contact your sales representative to see
how we can make a difference for you.
Main Office:1023 S. 50th Street • Tampa, FL
866-586-8956
Fort LauderdaleDavie)
954-327-8808
Fort Myers293-334-6063
Orlando407-859-9160
Jacksonville904-268-4400
Savannah, GA912-966-5666
The Takeuchi product line is only available in the Tampa and Orlando locations.
see COASTAL page 54
Coastal Equipment Holds Open House in Virginia BeachCoastal Equipment Corporation held an open house at
its Virginia Beach, Va., location on Oct. 17 and at itsYorktown, Va., location on Oct. 18.
Many machines were on display, a hearty lunch wasserved and door prizes were given away with a large flatscreen television being the grand prize.Coastal Equipment is committed to providing the highest
quality, most reliable construction equipment in the industry.They represent the full line of John Deere and HitachiConstruction Equipment. They have an experienced teamready to help you select the right machine for your job andalso help you locate the best financing solutions. Whetheryou are looking for an 83-ton excavator, a compact skid steerloader, or anything in between, Coastal Equipment can helpyou find the best machine for your application.
Tom Buckner (L), Coastal Equipment Corporation,goes over the John Deere 750K LGP dozer with HarryBlazer, Vanguard Contractors, Paducah, Ky. Vanguardis in the area working on projects at Langley andneeded more dozers for the project.
Bobby Jeter (L), M&W Construction, Virginia Beach,Va., is welcomed by Jeff Clay, president of CoastalEquipment Corporation.
Wally Wallace, E.V. Williams Inc., in Virginia Beach, Va.,just purchased two new 750K Deere dozers fromCoastal Equipment to go with the 17 others his com-pany is using. With Wally are Suzi Wright (L) and JulieClay Burns.
Bert Allen (L), Spence Marine Construction, VirginiaBeach, Va., needed an auxiliary valve replacement andgot the parts order filled by Vernon Hayden duringCoastal Equipment’s open house.
(L-R): Jeff Clay, president, and his father, Bob Clay, chairman of Coastal Equipment,along with Craig McBeth, Scott Knox and Alexandre Viens, all of John Deere, wel-comed the guests to the event.
(L-R): Bob Perry and Julie Clay Burns, both of CoastalEquipment Corporation, welcome Keith Nowell,Northwest Contractors, Chesapeake, Va. Each guestwas given an all-purpose bag filled with cups, pens,key chains, writing tablet and other nice items.
Four generations of the Clay family welcome the Mayor of Virginia Beach, WillSessoms, to the event. (L-R) are Rhonda and Jeff Clay; Sessoms; Harriet and BobClay; Julie Burns Clay and Lauren Tignor.
Page 8 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 9
Page 10 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ph. 770-949-9231 • Fax: 770-947-9916
Your Best Sourcefor MovingHeavy Equipment
• Port approved drivers• Full service freight brokerage• Asset based transportation
• 7 acres of secure outdoor storage
• High value cargo insurance available• 8,9,10 and 11 axle capacity
Stribling Equipment LLC, is pleased to announce itsacquisition of the heavy equipment dealership operations ofWarrior of Arkansas Inc., a company operating numerouslocations serving Arkansas and portions of Texas andOklahoma.
As a result of the acquisition, Stribling Equipment’s oper-ations for John Deere Construction and Forestry now encom-pass all of Mississippi, Arkansas, the 21 western counties ofTennessee and four eastern counties of Texas and Oklahoma.
The western territories of Stribling Equipment will beserved by seven new locations: Little Rock (Mabelvale),Fayetteville (Springdale), Texarkana, Fort Smith, Camden,Monticello and Arkadelphia.
Stribling, which has been providing quality service in theheavy equipment industry for more than 65 years, now has19 locations serving customers in the construction andforestry industry in Mississippi, Tennessee, Arkansas andportions of Texas and Oklahoma.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
Stribling Equip.Acquires Warriorof Arkansas Inc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 11
Page 14 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Linder Hosts First Annual Oktoberfest in Lakeland, Fla.
Linder Industrial Machinery recently hosted its firstannual Oktoberfest at the Lakeland, Fla., location.The company plans to make this an annual event,
according to John Coughlin, Linder’s president and COO.They hosted one earlier this year in Columbia, S.C., and planto do one a year in the Carolinas and in Florida. In 2013 theevents will be in Jacksonville, Fla., and Raleigh, S.C. Theevent carried the Oktoberfest theme through with Germanfood and music.More than 50 machines were on display from various
manufacturers, giving Linder’s staff the opportunity to showcustomers a large portion of the equipment they represent. “This show was all about the equipment.” said Coughlin.
“It gave us the opportunity for face time with our customersto show them our equipment and to enjoy some food andmusic together.”
(L-R): Tony Yanis of Linder explains the finer points of this paver to Alexis Luis and LazelOrami, both of A. Luis Milling & Service.
Randy Thomas (L), Linder, shows the new D61px dozer to Dennis Klatil,Cemex.
This Vogele paver was getting a close look from ShayeBrook (L), Lane Construction, and Steve Ricke,Wirtgen.
(L-R): John Coughlin, president and COO of Linder,chats with Glen and Barbara Anderson of JMHC, andJohnny Bass of Linder.
Dan Well (L) and Mark Bitomski (R), AsphaltRecycling, get some information on this HammHD14VV from Kenny Mitchell of Hamm.
John Coughlin (L), president and COO of LinderIndustrial Machinery, and Jim McEvoy, president andCEO of Wirtgen America.see OKTOBERFEST page 26
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 15
View Our Inventory atwww.haletrailer.com
New East Florida Spec Dumps, 24' x 96" x 60" tri-axle suspension, electric tarp
New East walking floors, 48' long x 102" x 13',spring suspension; Keith walking floor installed.
We Rent LowbedsWe Rent Walking Floors
ExcellentFinancingAvailable
NEW TALBERT & FONTAINE 5O & 55 TON LOWBOYS, Flat Level Deck & Raised Center, 25’ & 26’ DeckLengths, (2) King Pin Locations, Automatic 3rd Axle AirLifts, 275/70R 22.5, 3+1 Capability, In Stock!
New Landoll 440 & Trail King TK70SA, 50'x102", air ride suspension, 20K winch,
wireless remote, PSI system & dock levelers optional
New Etnyre 35 Ton & 55 Ton Paver Special Low Boys,
Air Ride Suspension, Tandem & Triaxle
New East Hardox Steel Dumps 34' x 96" x 66"SUPER HEAVY DUTY - Demolition Trailer, Air Ride, BarnDoor.
New Talbert 20 Ton tags, 21' deck, 6' beaver tail,17.5 wheels
NEW Fontaine Steel Flatbeds, 48’x102” SpringSliding Suspension Winches & Bulkhead Included
YOUR DEALER FOR HEAVY HAUL EQUIPMENTNEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King
New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-AxleSuspension, Air Lift
Talbert 35 Ton Lowboys22" Deck Height, Air Ride Suspension
Weight Laws are Changing!Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need.
We RentLowboys, Blade
Trailers, Etc.
www.haletrailer.com
Concord, NC800-438-2250
Columbia, SC800-915-9900
Jacksonville, FL800-828-3055
New Fontaine Velocity Steel Drop Decks,48’x102”, Air Ride Spread Bulkhead and Winches
New Manac Hardox Steel Dumps, 40’x102”x100”,Single Point Susp, 87 Cu. Yds, Frameless and FrameType, Also Available w/76” Sides
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys,
26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
New Fontaine Revolution H Composite Flatbeds48’x102”, Air Spread Suspension Aluminum Wheels,Winches, Also Available in a Drop Deck
8,990 LBS.
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys
IN STOCK
IN STOCK
Page 16 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
YOUR COMPLETE RENTAL RESOURCE
ORLANDO
TAMPA
JACKSONVILLE2750 Imeson Road
Jacksonville, FL 32220
PRO
FESSIO
LNAL
Your Complete Rental Resource!S O
OSHOR SHOR PRO
Your Complete Rental Resource!G & SUSS O
RING & SURING & SUFESSION
L PPLY PPLY
NAL source!
steel trench shield
11128 Boggy Creek RdORLANDO
slide rail system
gas monitors
Other Supplies:
O YYOUR COMPLET
Jacksonville, FL 322202750 Imeson Road
JACKSONVILLE
Tampa, FL 336377532 Malta Lane
TAMPA
407-854-9949Orlando, FL 32824
11128 Boggy Creek Rd
CEESOURAL RENTE R RENTOUR COMPLET TE R
fall protectionblowers/hosesguideframequicksheet™ build-a-box™manhole shieldsOther Supplies:
Equipment Distributorq p
CE
ELFA Release September Survey of Economic ActivityThe Equipment Leasing and Finance
Association’s (ELFA) Monthly Leasing andFinance Index (MLFI-25), which reportseconomic activity for the $628 billion equip-ment finance sector, showed overall newbusiness volume for August was $6.9 bil-lion, up 21 percent from volume of $5.7 bil-lion in the same period in 2011. Volume wasup 5 percent from the previous month. Year-to-date cumulative new business volumeincreased 16 percent.Receivables over 30 days decreased for
the third consecutive month to 1.9 percent,down from 2.2 percent in July and down 24percent when compared to the same periodin 2011. Charge-offs were unchanged fromthe previous month at 0.4 percent, and downby 33 percent compared to the same periodlast year. Credit approvals decreased slightly to
77.0 percent in August from 77.5 percent inJuly. Sixty-two percent of participatingorganizations reported submitting moretransactions for approval during August,down from 65.5 percent the previous month.Finally, total headcount for equipment
finance companies was unchanged from theprevious month, and declined 3.0 percentyear over year.
Separately, the Equipment Leasing andFinance Foundation’s Monthly ConfidenceIndex (MCI-EFI) for September is 53.0, upfrom the August index of 50.2, reflectingincreased optimism despite concerns overcompanies’ willingness to expand their busi-nesses in the face of economic and politicaluncertainty.ELFA President and CEO William G.
Sutton said, “The pace of new equipmentfinancing continued throughout the summermonths as the housing sector, for one,showed signs of a rebound. However, busi-nesses, both large and small, continue tobuild up cash reserves, indicating lingeringapprehension over increasing energy prices,instability in the Arab world and a still frag-ile Eurozone economy.”Thomas Depping, chief executive officer,
Ascentium Capital, said, “The general origi-nation and credit quality trends detailedabove mirror our experience at AscentiumCapital. The credit quality of our applica-tions remains unprecedentedly strong andour delinquencies at historic lows. Althoughwe have hedged ourselves against anotherpossible global economic slowdown, wecontinue to expand our sales force as wehave a generally optimistic view of our
future. One thing I have learned over thepast 30 years in the industry is that beingover-capitalized and having substantialexcess liquidity is never a bad thing.”
About the ELFA’s MLFI-25The MLFI-25 is the only index that
reflects capex, or the volume of commercialequipment financed in the United States TheMLFI-25 is released globally at 8 a.m.Eastern time from Washington, D.C., eachmonth, on the day before the U.S.Department of Commerce releases thedurable goods report. The MLFI-25 is afinancial indicator that complements thedurable goods report and other economicindexes, including the Institute for SupplyManagement Index, which reports econom-ic activity in the manufacturing sector.Together with the MLFI-25 these reportsprovide a complete view of the status of pro-ductive assets in the U.S. economy: equip-ment produced, acquired and financed.The MLFI-25 is a time series that reflects
two years of business activity for the 25companies currently participating in the sur-vey. The latest MLFI-25, including method-ology and participants is available athttp://www.elfaonline.org/Research/MLFI/
MLFI-25 MethodologyThe ELFA produces the MLFI-25 survey
to help member organizations achieve com-petitive advantage by providing them withleading-edge research and benchmarkinginformation to support strategic businessdecision making. The MLFI-25 is a barometer of the trends
in U.S. capital equipment investment. Fivecomponents are included in the survey: newbusiness volume (originations), aging ofreceivables, charge-offs, credit approvalratios, (approved vs. submitted) and head-count for the equipment finance business.The MLFI-25 measures monthly com-
mercial equipment lease and loan activity asreported by participating ELFA memberequipment finance companies representing across section of the equipment finance sec-tor, including small ticket, middle-market,large ticket, bank, captive and independentleasing and finance companies. Based onhard survey data, the responses mirror theeconomic activity of the broader equipmentfinance sector and current business condi-tions nationally.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 17
Page 18 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Visit www.sealsaver.com for more information or contact us at 1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
The SEAL SAVER*WILL:
• Eliminate rod scoring
• Extend the life of cylinder seals
• Protect cylinders from the elements
• Prevent pitting due tochemical washes
• Reduce particle contamination of hydraulic systems
• Minimize dings and dents associated with
falling debris*Patented
Made inthe USA
SEAL SAVERhas proven effective inRecycling, Construction,
Mining, Rock Quarries, WasteManagement, Refineries, WoodProducts Processing, Steel
Mills and Hot Slag Industries.
3144 Hwy 74 EastMonroe, NC 28112
www.brookssales.com
HoursMon.-Fri. 7:30am-5:00pmSat. 8am-12pm
BROOKS SALES FOR CASE SERVICE & SALES
Call Jimmy for Service & Brian for Parts.
704-233-4242 800-443-7569
The Best Parts & Technicians for your Case Skid Steer Loaders & CTL Track Machinesare at Brooks Sales. They are waiting for you.
Mon.-Fri. 7:30am-5:30pmSat. 8am-12pm
Call Jimmy for Service & Brian for Parts.
704-233-4242800-443-7569
7
4:28 PM
7
The Best Parts & Technicians for yourCase Skid Steer Loaders & CTL Track Machines are
at Brooks Sales. They are waiting for you.
John Payne recently joined Hills Machinery as the territo-ry representative covering upstate South Carolina.
Payne joins the Hills Machinery team with nearly 30years experience in the industry under his belt, with a focuson sales, management and customer satisfaction.
During those years, Payne refined his communication andinterpersonal skills, putting them to use in maintaining exist-ing customers as well as in bringing in new business. He alsobecame a company mediator, settling issues betweenemployees, company departments and customers. Sales pre-sentations, needs assessments and increasing market sharesalso all come together in Payne’s extensive catalog of indus-try expertise.
Payne is looking forward to bringing his talents to the forein his new role at Hills Machinery.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
John Payne Joins Hills Machinery as Territory Rep.
John Payne recently joined Hills Machinery as the ter-ritory representative covering upstate South Carolina.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 19
ABINGTON, LLCKernersville, North Carolina • Contact Andy Kendall
The Trimble Grade Control System Is The Most Advanced 3D Grading and GPS Guidance Technology Available.
Order Your Machine Trimble Ready.
Now accepting CAT Access- Use Your CAT Access Account To Purchase Technology From Sitech
SITECH Mid-Atlantic800.443.7561
Charlotte, Raleigh, Charleston, Richmond
TUPELO, Miss. (AP) The lowest bid to build a bridgeover the Natchez Trace Parkway came in $1.4 million high-er than expected. Officials told the Northeast Mississippi Daily Journal that
members of the Major Thoroughfare Committee would dis-cuss the bids on Oct. 8 before taking a proposal to the citycouncil. The bridge is part of the city’s northern loop road project. Three companies submitted bids with the lowest coming
in at $7.4 million from Madison-based Key Constructors.The five-lane, 320-ft. (97.5 m) bridge had been estimated tocost $6 million during an analysis done nearly two years ago. The Major Thoroughfare Program is funded by a 10-mill
property tax. The road commonly is called the northern loop and must
cross both the Natchez Trace and U.S. Highway 78. The Mississippi Department of Transportation also must
authorize the deal because the project will receive federalfunds administered by the state. If all goes as planned, construction of the bridge could
begin by mid- to late November. The project is expected totake 16 months. The bridge over U.S. 78 could start later this year or early
next year. The entire northern loop is 4.5 mi. (7.2 km) long and paid
mostly through revenues generated by the MajorThoroughfare tax levy.
Low Bid on Miss. Bridge Hits $7.4M
Page 20 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Road ConnectionTour Winds Up atKPI-JCI EventAfter 35,000 miles, 39 states, and nine oil changes, The
Road Connection tour officially came to a close inYankton, S.D. A celebratory rally was held at
Kolberg Pioneer Inc. (KPI) headquarters to bring closure tothis comprehensive advocacy campaign.
During the past year, the marketing team at KPI-JCI andAstec Mobile Screens has taken an active role in advocatingfor stronger construction and transportation industries byurging the passage of a long-term transportation bill, com-monly known as MAP-21. Members of the organizationidentified a need for infrastructure funding, and subsequent-ly created and sponsored The Road Connection — a cam-paign designed to bring awareness to the public about thecondition of U.S. infrastructure.
The celebration to cap off The Road Connection tour washeld in tandem with the KPI-JCI and Astec Mobile ScreensNational Dealer Conference (NDC) — an annual opportuni-ty for equipment dealers to gather for networking, educa-tional sessions and seminars.
For more information, visit www.theroadconnection.org.
(L-R): Randy Manteafel, aggregate specialist, KPI-JCI;Tom Lamberg, division manager, KPI-JCI; and TravisHinnerichs, design engineer, American State, TheEquipment People out of Little Chute, Wis., pose duringthe KPI-JCI and Astec Mobile Screens National DealerConference.
The celebration to cap off The Road Connection tourwas held in tandem with the KPI-JCI and Astec MobileScreens National Dealer Conference (NDC) — anannual opportunity for equipment dealers to gatherfor networking, educational sessions, and seminars.
Brad Sykora (L) aggregate equipment specialist, andDave Johnson, COO, both of Road Machinery &Supplies, Savage, Minn., enjoyed meeting with KPI-JCIand Astec Mobile Screens staff to discuss the success-ful Road Connection campaign.
Gary Lloyd (L) of Ideker, out of St. Joe, Mo., and RobFranklin, G.W. Van Keppel Company, Kansas City, Mo.,had a great time at the event hosted by KPI-JCI. Lloydsaid he uses the KPI-JCI equipment frequently in hisbusiness of concrete, heavy highway, asphalt andquarries, like this FT300DF.
Mike Johnson (L), vice president of sales and marketing, KPI-JCI and Astec Mobile Screens, and Curt Peterka,advertising manager of KPI-JCI and Astec Mobile Screens (and a Road Connection truck traveler), celebrate avery successful campaign with Congress passing the long-term road bill, earlier this year.
Shane Stevens, engineer technician, KPI-JCI is givingan informational plant tour.
The Road Connection map, showing the many placesthe Road Connection Truck traveled to, hangs on dis-play.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 21
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
DEALER IMPRINT AREA
> > >
INTRODUCING A NEW E.P.I.C. GENERATION
EFFICIENT
POWERFUL
INTELLIGENT
COMFORTABLE
REAANT IDEALER IMPR
www.mayequip.com
Lexington, NC336-357-5005
Columbia, SC803-865-1002
Page 22 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CORROSION CONTROLEQUIPMENT & SUPPLIES
888-253-2444 • www.pinnaclecentral.biz
• ABRASIVE BLAST EQUIPMENTLarge & Small
• DIESEL & ELECTRIC COMPRESSORS
• BOOM FORKLIFTS
• BLAST ABRASIVESAll types, Bulk & Bagged
• DUST COLLECTION SYSTEMS• HUMIDITY CONTROL SYSTEMS• VACUUM SYSTEMS
Call us today - We know how to put a package together!
103 Bryan St.Jacksonville, FL 32202904-354-5746
600 N. Commonwealth Ave.Polk City, FL 33868863-984-6262
Pinnacle Central Company
Looking for Certified Used Equipment?Have Equipment You’d Like to Sell?
Contact:
As a Division of BRAMCO, along with Brandeis Machinery & Supply andPower Equipment, we’re backed by more than 100 years of experience serving construction and mining companies, municipalities and utilities contractors. We have a 30 year history as the authorized Komatsu dealerin Kentucky, Indiana and Tennessee.
We’re second to none in understanding the value of your machines andhave earned a reputation for fair dealings. Trust K.I.T. Equipment to helpwith your fleet reduction efforts.
Call John Noble Today: 502-493-42201801 Watterson Trail • Louisville, KY 40232
www.kitequipment.com
K.I.T. Equipment
Monies Collected Slated to Fund State-Wide ProjectsThe measure also calls for thededication of an existing 1-cent-per-gallon fuel tax to fundroad projects, which brings thetotal program to $1.8 billion. “Several things are of benefit
to voters and it’s our job toinform them of the benefits,obviously,” Douglass said.“This will continue the con-struction of four-lane highwayprojects that connect all parts ofthe state. We have learned intalking with voters that theywant Arkansas to be better con-nected.” Last year, voters approved
the reissuance of $575 millionin bonds to fund more than 400mi. of interstate repairs. Ifapproved, the new tax wouldfund improvements to high-ways throughout the state,along with a handful of inter-state projects. The Arkansas Highway
Commission selected the proj-ects by “following the cars,”Douglass said. Among the proj-ects that would be funded by
the tax include makingInterstate 540 six lanesbetween Fayetteville andBentonville while doing thesame on Interstate 40 betweenConway and Little Rock. Theplan also calls for additionalfour-lane work in northeastArkansas to connect Jonesboroand Paragould to U.S. 67/167and Interstate 55. Gov. Mike Beebe is backing
the proposal, spokesman MattDeCample said. The fact thatthe measure has a sunset of 10years and that it doesn’t raisetaxes on groceries led the gov-ernor to support the increase,DeCample said. “We need opportunities for
future highway funding andthis is one that puts that choicedirectly to the people,” he said. Many groups, including the
Arkansas State Chamber ofCommerce and the ArkansasFarm Bureau also are support-ing the plan. “From agriculture’s stand-
point, our products can’t get tomarket without good roads. It’s
as simple as that,” said FarmBureau President Randy Veachin announcing the group’s sup-port. “Like everyone, we arecautious of using sales tax rev-enue to fund a building pro-gram. But as Arkansas’ largestindustry, agriculture will bene-fit from any infrastructureimprovements.” The measure is one of two
referred by the Legislature dur-ing its 2011 session. The sec-ond proposal would allowcities and counties to createSales Tax AnticipatedRevenue, or STAR, districts.They are similar to TaxIncrement Financing districtsbut use anticipated revenuefrom sales taxes to pay off thedebt. If approved, the Legislature
must adopt laws governing theuse of STAR bonds before theycan be issued and any districtwould have to be approved atthe local level. The proposal has the back-
ing of the Arkansas MunicipalLeague and the governor.
TAX from page 1
List Of Ark. Highway Projects to Be Funded by Tax
Here is the list of projects that would befunded if a half-cent sales tax increase isapproved by Arkansas voters in November:
Central Arkansas• Widening of U.S. 70 to four lanes
between Interstate 30 and Hot Springs • Continuation of widening U.S. 270 to
four lanes from Hot Springs westward • Completion of widening U.S. 64 to four
lanes between Conway and Beebe • Completion of widening Interstate 40 to
six lanes between Little Rock and Conway • Completion of widening U.S. 67 to six
lanes from Jacksonville to Cabot • Improvements to Interstate 30 connect-
ing Little Rock and North Little Rock, includingwidening the I-30 bridge over the ArkansasRiver
• Continuation of widening Interstate 630in Little Rock from Baptist Hospital toUniversity Avenue
Northwest Arkansas • Widening Interstate 540 to six lanes
between Fayetteville and Bentonville • Completion of the initial two lanes of the
future four-lane Bella Vista bypass
• Beginning four-lane construction of theU.S. 412 Springdale bypass from Interstate540 to the Northwest Arkansas RegionalAirport connector
South Arkansas• Completion of widening U.S. 425 to four
lanes from Hamburg to the Louisiana line • Completion of widening U.S. 167 to four
lanes between Interstate 530 and El Dorado • Beginning the widening of U.S. 82 to four
lanes from El Dorado to Magnolia toTexarkana
Northeast Arkansas• Completion of widening U.S. 412 to four
lanes between Paragould and Walnut Ridge • Completion of widening Arkansas 18 to
four lanes between Jonesboro and Blythevilleto Interstate 55
East Arkansas• Continuation of widening U.S. 64 to four
lanes between Marion and Wynne
North/North Central Arkansas • Continuation of widening U.S. 65 to four
lanes between Harrison and Clinton
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 23
Page 24 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Loading some of the approximately one million yds. ofrock that had to be blasted to make way for the road.
construction. Despite this foresight, $230million was spent to acquire 525 acres ofadditional right-of-way needed for construc-tion.At $1,171.7 million, according to the
Federal Highway Administration, theTriangle Expressway is the largest trans-portation infrastructure project in the state’shistory, creating 13,800 jobs. Jason Peterson,Triangle Expressway project manager, saidNorth Carolina has the second-largest state-funded road network in the United Statesbehind Texas. In 2008, the State House voted to approve
$25 million a year for 39 years for the proj-ect to cover the difference between expectedtoll collections and actual costs. However,due to the economic slump, funding from thegas tax and new car sales “can’t keep up withthe need,” as Peterson puts it.Supplementing state funds and aTransportation Infrastructure Finance andInnovation Act loan are bond sales, whichbegan in 2009.
Divided Project for Divided Highway
The toll way consists of two sections: theTriangle Parkway and the Western WakeFreeway, but two contracts divide the workinto three sections. “The whole project is really two small
design-build projects,” Peterson said. Phase I, Triangle Parkway, opened in
December 2011 at a cost of $137.5 million.It extends the pre-existing NC 147 to theNorthern Wake Expressway (NC 540). The2.8-mi. (4.5 km) segment of NC 540 con-structed by the N.C. Department ofTransportation with Surface TransportationFunds opened five years ago and will betransferred to the North Carolina TurnpikeAuthority to oversee. “NC 540 was a free route, but it becomes
a toll road [as part of this project],” Petersonsaid.S. T. Wooten Corp. of Wilson, N.C., was
the general contractor on this portion of theproject. Granite Construction of Watsonville,
Calif., and Archer Western Contractors ofAtlanta teamed up to form a joint venture asRaleigh Durham Roadbuilders to completePhases II and III. These two sections com-prise a separate contract for $446.5 million
and are collectively referred to as theWestern Wake Freeway because the multi-lane road will link NC 540 in western WakeCounty to the NC 55 Bypass in HollySprings, about 12.6 mi. (20.2 km) south. Work began in the summer of 2009. Phase
II opened August 1, 2012. Phase III — thefinal 6 mi. (9.7 km) of the toll way — isscheduled to open January 2013.
Work DetailThe Parkway includes: 10 interchanges,
41 bridges, 22 box culverts for drainage, 71overhead sign structures, 13 electronic tollsites and three greenway trails. “It’s multi-modal,” Peterson said. “It’s not
just about cars.”Over the course of the 42-month project,
crews will use 130,000 tons (117,934 t) ofaggregate base course and 215,000 tons(195,044 t) of asphalt. Phase I used asphalt;the large project used concrete. Both projectsbrought temporary plants on-site.Of the 7.5 million yds. of excavation, any-
thing that is 2 in. or smaller is used on-sitefor fills. Because the area features red claywith a streak of triassic rock that is strongand tough until it’s exposed to the elements,approximately 1 million yds. of rock had tobe blasted to make way for the road. “They were blasting every day for eight or
nine months,” Peterson calculated.As difficult as blasting was, perhaps a big-
ger challenge is the compressed schedule. “The sooner we open, the sooner we
make revenue [from tolls],” Peterson said.“Bond repayment is 32 years. The first proj-ect was completed in two years; the secondproject is scheduled to be finished in threeyears, from cutting the first tree to opening.”To meet the deadline, crews work six days
a week. Because the toll road is a new loca-tion project, there was little traffic to worryabout: just some cross traffic at the intersec-tions. Nevertheless, because of time and lanerestrictions, some work was done on nightsand weekends, mostly during the summerbetween Memorial Day and Labor Day. Twoconcrete paving seasons were coordinated atnight to take advantage of cooler tempera-tures and for better productivity. “The site is less crowded because paving
was the only operation going on,” Petersonsaid.The paving operation incorporated a new
24-ft.-wide (7.3 m) paver and was one of the
first projects in the state to use stakeless tech-nology. “It’s easier on the subgrade,” Peterson
explained. When it’s finished, the entire road will be
easier on commuters. To ensure a smoothride, crews are pouring to meet InternationalRoughness Index specifications. “We mount a laser device to a vehicle to
measure deviations in the pavement. Theconcrete max is 75; our numbers are in the30s and 40s. The contractor is pretty proud.”The Triangle Expressway is one of the
first projects in the state to adhere to IRIstandards. The high standards set by theteam are an example of their ultimate goal. “We strive to provide a great product,”
Peterson said. “There’s a lot of pressure toget things right.” So far, they have. Phase II opened to rave
reviews.
Taking Its Toll on the RoadHad the state not chosen to make this a toll
road, Peterson said, the funding formatwouldn’t have come up for 20 years. Thestate didn’t want to wait that long before itcould afford to build the road, so theTurnpike Authority designated the TriangleParkway as a toll way project in 2005. Twoyears later it was selected to become NorthCarolina’s first all-electronic toll road.“Originally, it was designed with tradi-
tional toll booths,” Peterson said. “But afterstudying tolls roads in the Northeast and inTexas, in 2007 the board decided not to usetoll booths, opting for an all-electronicmethod of collection. It will save an estimat-ed $60 million in capital costs of infrastruc-ture for the toll lanes, toll booths and person-nel.“Because of the novelty of the system, the
public requires education on the advantagesof tolling,” Peterson said. One of the chief benefits is how much
faster it will be. The toll road is expected toshave 20 minutes off the commute in eachdirection.The speed of travel is augmented by a
transponder toll program called NC QuickPass that keeps traffic moving. Regular com-muters can set up an account with the N.C.Turnpike Authority. They then install a pock-et-size device in their vehicle’s windshield. Overhead gantries containing radio fre-
quency readers collect the customer’s ID
number and automatically deduct tolls froma pre-paid account. “It’s just like getting on any other road,”
Peterson said. “Drivers won’t even noticeit.” Travelers without a NC Quick Pass are
tracked by their license plate after a cameratakes a photo. A bill will then be mailed tothe owner of the vehicle.As an added benefit, because so many
commuters also travel to regions in thenortheast, Peterson said they’re workingtoward transponder compatibility with E-ZPass. “It will be seamless for the traveler ifwe reach an agreement.”Keeping drivers happy is key to the suc-
cess of this innovative project. “We had to provide a benefit to get people
on board. One benefit is an $8 million intel-ligent transportation system that will moni-tor the road, using 81 microwave vehicledetectors. The information they retrieve willpopulate a speed map, alerting drivers todelays, accidents and other important infor-mation. There will be full camera coverageof all 18 mi. It will help clear accidentsfaster,” Peterson said. “The goal is a higherlevel of service.” Because the Turnpike Authority wants the
entire length of its first toll road to “look andfeel different,” a separate landscape contractfor $5 million was awarded: 140,000 grass-es, shrubs and trees will be planted along theroute. It’s the first design-build landscapecontract in North Carolina.The toll way will be cleaner, with less lit-
ter, Peterson continued. And it will be care-fully maintained by the Turnpike Authority,with funds built into the bonds for manage-ment and maintenance. If traffic picks up,causing increased wear, the funding fromadditional tolls increases to cover mainte-nance or expansion as necessary. “We builtwhat we needed to handle existing traffic,with built-in funding for the future.”To keep the toll road in optimal condition,
instead of the standard one-year warranty,the Turnpike Authority offered a three-yearwarranty, with periodic evaluations. “TheOperations group gives a maintenance gradetwice a year. They look for pot holes, lowshoulders, guard rail damage… They’llmaintain it at a 90 percent level of service.”
(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG
EXPRESSWAY from page 1
S. T. Wooten Corp. of Wilson, N.C., was the general con-tractor on Phase I of the project.
The pavingoperationincorporat-ed a new 24-ft.-wide (7.3m) paverand was oneof the firstprojects inthe state touse stake-less technol-ogy.
Highway Designated N.C.’s First All-Electronic Toll Road
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 25
AGC to Continue Providing ItsFall Protection Safety ProgramThe Associated General Contractors of
America will continue to provide fall protec-tion safety training next year due to a feder-al safety grant the association is beingawarded. The association will use the$120,000 Susan Harwood Training Grantfrom the U.S. Department of Labor to offerthe fall protection safety training designed toprevent potentially fatal falls among con-struction workers, officials said.“Nothing is more important to our mem-
bers than the safety of every constructionworker,” said Stephen E. Sandherr, the asso-ciation’s chief executive officer. “Theexpanded program will help give construc-tion workers the training they need to remainsafe on the job site”According to the latest safety statistics,
fall-related fatalities remain the single largestcause of construction deaths while the over-
all number of construction fatalities hasdeclined by nearly 50 percent over the pastfive years, Sandherr said. In 2010, fall-relat-ed fatalities account for 35 percent of thetotal, 260 out of the 751 construction fatali-ties, he added.The fall protection safety program will be
offered in eight different locations next year,reaching as many as 500 construction work-ers, Sandherr noted. The program will pro-vide comprehensive information about fallprotection for both commercial and residen-tial construction, he added.In addition to the fall protection program,
the association offers a variety of safety pro-grams and materials that many member con-struction firms currently use. The associationoffers educational materials to member firmsand in-seat safety training programs acrossthe country.
Keep Up With All the Industry News Subscribe to Construction Equipment Guide Today!
Toll Free 800/523-2200
CALL DOUG OR SAM
(866) 485-7180WWW.RBUSED.COM
Ritchie Bros. Auctioneers Achieves Record SeptemberVancouver-based Ritchie Bros.
Auctioneers sold approximately $561 mil-lion of equipment at 31 unreserved auctionsaround the world in September 2012, thehighest September gross auction proceeds incompany history and one of its largest evermonths. The company also achieved itshighest ever third quarter gross auction pro-ceeds with approximately $848 million ofequipment sold during the quarter endedSept. 30, 2012. The Ritchie Bros. Web siteattracted roughly 4.1 million unique visitorsin the first nine months of 2012, a 39 percentincrease compared to the same period in2011. “Our record September and third quarter
gross auction proceeds reflect steadyimprovement in equipment supply anddemand dynamics, which we discussed onour August earnings call,” said Peter Blake,Ritchie Bros. CEO. “New equipment supplyand demand continued to become more bal-anced during the quarter, which is beginningto increase the availability of used equip-ment in the market. This is a positive devel-opment for our business and growthprospects, though increasing equipment sup-ply resulted in generally more variability inused equipment prices at our auctions in themonth of September.
“We expect that increased availability ofequipment will continue to stimulate thesupply of used equipment to sell at our auc-tions. This is a promising sign as we moveinto the fourth quarter and we are confidentin our ability to execute and achieve our2012 plan.” Highlights from the month of September
included: • Demand for heavy equipment and
trucks remains strong in AlbertaOn Sept. 5 and 6, 2012, Ritchie Bros.
Auctioneers sold close to $54 million ofheavy equipment and trucks during a two-day unreserved public auction at the compa-ny’s permanent auction site in Edmonton,Alberta. Almost 5,000 registered bidderscompeted for 4,600 heavy equipment itemsand trucks, including a selection of morethan 120 T/A truck tractors, more than 75
hydraulic excavators and more. • Close to 1,700 heavy equipment items
sold in Australia in two daysLater in the month, the company sold
more than $67 million of heavy equipmentand trucks at two Australian unreserved pub-lic auctions in Brisbane, QLD (Sept. 18) andGeelong, VIC (Sept. 20). In total, close to1,700 heavy equipment items and truckswere sold in the two auctions, including 92wheel loaders, 86 hydraulic excavators, 21crawler tractors, 36 articulated dump trucks,52 prime movers and more. • Strong international participation at
two-day Texas auctionMore than 2,950 bidders from 58 coun-
tries participated at a two-day unreservedpublic auction in Fort Worth, Texas, on Sept.25 and 26, 2012. The company sold morethan $40 million of equipment items and
trucks at the Fort Worth auction, which fea-tured more than 3,400 heavy equipmentitems and trucks. • Massive mining auction held in con-
junction with North Carolina GrandOpeningTo wrap up the record-breaking month of
September, Ritchie Bros. held a historic auc-tion at the company’s brand new permanentauction site in Raleigh-Durham, N.C. onSept. 26 and 27, 2012. More than 2,100 bid-ders from 51 countries registered on site inRaleigh, on site at a simulcast of the auctionin Las Vegas, Nev., or online at www.rbauc-tion.com to participate in the grand openingauction in North Carolina, which featured amassive selection of more than 300 miningand earthmoving equipment items that wereused in coal mining operations in Kentuckyand West Virginia. The company sold more than 60
Caterpillar D11 crawler tractors on day twoof the auction. Local U.S.-based buyers aswell as buyers from as far away as Australiaand Hong Kong purchased the D11s on auc-tion day. By the end of day two, the compa-ny had sold more than $76 million of trucks,heavy construction, earthmoving and min-ing equipment during the two-day unre-served public auction.
“We expect that increased availability ofequipment will continue to stimulate the supply of used equipment.”
Peter BlakeRitchie Bros.
Coughlin Plans toHost Event Yearly
Kevin Chastain (L), Linder, and Randall Starkey,Kiewitt, spend a few minutes discussing the event.
Jim Engard (L), Linder, takes a few minutes to showthis Hamm roller to Sal D’Amato of Mid AtlanticMilling.
Corey Wall (L), Wirtgen, shows this new Hamm H20iroller to Gary MacMillan of Azzarelli Paving.
Corey Wall (L), Wirtgen’s district sales manager forFlorida and Georgia, shows Gator Patrick of AjaxPaving the finer points of the Vogele Paver Super1300-2.
OKTOBERFEST from page 14
Page 26 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 27
Page 28 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 30 • October 31, 2012 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
John Deere is adding fourmodels to the K-Seriescrawler dozer line, providingcontractors an emissions-cer-tified machine that affordshigher productivity,increased uptime and lowerdaily operating costs in earthmoving and grading applica-tions, according to the manu-facturer. The 550K, 650K, 700K
and 750K crawler dozersbuild off the 850K thatlaunched in 2011.“We’re excited to add four
efficient and productivecrawler dozer models to theJohn Deere line-up,” said JonGilbeck, global product mar-keting manager of crawlerdozers, John DeereConstruction & Forestry.“Our customers wanted anIT4 engine, a quieter andmore comfortable cab and theunsurpassed operating easeand maneuverability theyhave come to expect fromJohn Deere. With the success of the850K, we only thought it was logicalto expand the K-Series’ offerings.”A John Deere PowerTech 6.8-L
(700K, 750K) or 4.5L (550K, 650K)IT4 diesel engine provides an increasein horsepower from the previous J-Series, along with increases in overalltractor weight, resulting in more pro-ductive machines. The horsepowerranges include: 85 hp (550K), 101 hp(650K), 125 hp (700K), and 155-165hp (750K) at 1,800 rpm. The K-Series uses cooled EGR
technology with exhaust filters,Deere’s solution to meet 2012 EPAemissions regulations. The engine’sdiesel particulate filters are cleanedautomatically during routine opera-tion, eliminating the need to idle downfor maintenance and increasing overallmachine productivity. In addition, fil-ter access is easy, should it need serv-icing.The John Deere IT4 engine also
offers operation on slopes up to 45degrees while maintaining adequateoil flow to machine systems. Ahydraulically driven cool-on-demandfan operates only as needed, decreasescab and bystander noise levels, andcuts fuel consumption. A reversing
feature is standard for the 750K andoptional for the 550K, 650K, and700K to blow out debris. Both the 700K and 750K come
equipped with John Deere’s V-Coolpackage. This system isolates cool-ers from dust and engine heat forincreased efficiency and durability.In addition, the V-Cool is positionedbehind the heavy-duty grille andfan, making the coolers less vulner-able to the rigors of the work site.The four new crawler models
come equipped with hydrostatictransmissions, a feature John Deerepioneered in crawler dozers inNorth America in 1976. Thesetransmissions provide customersinfinite speed control, power man-agement, live power turns, counterrotation while staying in gear, anddynamic braking. In addition, totalmachine control allows customizedmachine response that can be tai-lored to meet the needs of individ-ual operators.Inside the cab, operators will find
increased comfort due to quieteroperation, larger access doors and astandard air suspension seat. Sounddampening in the cab reduces noiselevels up to 50-percent on the 550K
and 650K. Visibility to the bladeand job site is provided via ampleglass and well-positioned in-cab com-ponents. The models also feature asealed switch model (SSM) with key-less start and a coded-security start fea-ture, a 12-volt electrical accessory out-let and an integrated grade controlmonitor.Onboard diagnostics include a stan-
dard display monitor that provides realtime values for every temperature,pressure and speed sensor on themachine. The crawler dozers constant-ly monitor transmission temperature toavoid damage to the hydrostat system.If the transmission temperature is toocold or too hot, the associated light onthe monitor will illuminate. For those fleet managers, owners or
operators looking to get the most out oftheir equipment, the JDLink Ultimatesystem continuously collects andtransmits machine data for machinemanagement via mobile phone tech-nology. The system enables the pre-ventive maintenance and remote diag-nostics of crawler dozers, as well as thetracking of machines working on mul-tiple job sites. For more information, visit John
Deere at www.JohnDeere.com.
Deere Unveils Four K-Series CrawlerDozers With Hydrostatic Transmissions
A John Deere PowerTech 6.8-L (700K, 750K) or 4.5L (550K, 650K) IT4 dieselengine provides an increase in horsepower from the previous J-Series, along withincreases in overall tractor weight.
Power Equipmentwww.powerequipco.comMSSaltillo662-869-0283TNChattanooga423-894-1870Kingsport423-349-6111Knoxville865-577-5563LaVergne615-213-0900Memphis901-346-9800
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CARE
contact your Komatsu distributor or scan
this QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY
TIER 4 INTERIM EQUIPMENT WITH
COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
SOUTHEAST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 31, 2012 • Page 31
Efficient Komatsu Tier 4 Interim engine and automatic shift transmission with lockup torque converter maximize productivity while saving fuel.PLUS (long life) undercarriage is standard, further reducing our already low operating costs.Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.
Komatsu has once again made a great machine even better. The new D65-17 increases productivity and operator comfort while lowering operating costs. All designed to improve your bottom line.
Model Engine Power Weight Engine Typehp (kw) lbs. (kg)650L LGP 74 (55) 17,550 (7,959) Case 445TA/EG7a Tier 3650L LT 74 (55) 16,250 (7,370) Case 445TA/EG7a Tier 3650L WT 74 (55) 16,800 (7,619) Case 445TA/EG7a Tier 3 750L LGP 84 (63) 20,200 (9,163) Case 445TA/E66 Tier 3750L LT 84 (63) 18,900 (8,569) Case 445TA/E66 Tier 3750L WT 84 (63) 19,700 (8,955) Case 445TA/E66 Tier 3850L LGP 96 (72) 20,700 (9,402) Case Family IV 667TA/E66 Tier 3850L XLT 96 (72) 19,600 (8,900) Case Family IV 667TA/E66 Tier 3850L WT 96 (72) 20,200 (9,163) Case Family IV 667TA/E66 Tier 31150L LGP 118 (88) 29,365 (13,317) Case Family IV 667TA/EDJ1150L LT 118 (88) 27,858 (12,636) Case Family IV 667TA/EDJ1150L WT 118 (88) 28,667 (13,003) Case Family IV 667TA/EDJ1650L LGP 144 (107) 37,578 (17,042) Case Family IV 667TA/EDJ 1650L XLT 144 (107) 35,203 (15,965) Case Family IV 667TA/EDJ1650L WT 144 (107) 36,691 (16,640) Case Family IV 667TA/EDJ 1850L LGP 199 (148) 49,450 (22,430) Case Family IV 667TA/EBF Tier 31850L LT 184 (137) 44,269 (20,080) Case Family IV 667TA/EED Tier 31850L XLT 184 (137) 46,649 (21,159) Case Family IV 667TA/EED Tier 3
CASE
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)CATERPILLAR
Crawler Dozers
D3K2 XL 80 (59.7) 17,544 (7,958) Cat C4.4 ACERT
D3K2 LGP 80 (59.7) 18,525 (8,403) Cat C4.4 ACERT
D4K2 XL 92 (68.8) 18,080 (8,201) Cat C4.4 ACERT
D4K2 LGP 92 (68.8) 18,761 (8,510) Cat C4.4 ACERT
D5K2 XL 104 (77.6) 20,534 (9,314) Cat C4.4 ACERT
D5K2 LGP 104 (77.6) 21,266 (9,646) Cat C4.4 ACERT
see CHART page 34
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 31, 2012 • Page 33
IT’S GOT YOUR FINGERPRINTS ALL OVER IT.
Like all of our equipment, the850K was designed with exten-sive input by owners and opera-tors like you. We listened andresponded with numerous K-Series enhancements, includingadditional power and weight forincreased productivity. An EPAinterim Tier 4 diesel engine forwork in nonattainment areas.Spacious redesigned cab that’snoticeably quieter and morecomfortable. And best-in-classserviceability features, such asan innovative easy-to-clean “V-Cool” package. Add to those, theunsurpassed operating ease andmaneuverability operators havecome to expect from ourcrawlers, and the 850K is anobvious choice. To get yourhands on one, see your JohnDeere dealer.
Albany, GA229/888-1212
Atlanta, GA404/691-9445Grovetown, GA706/855-5440Columbus, GA
706/687-3344Braselton, GA
770/965-1889Macon, GA
478/788-1586Adairsville, GA770/773-9857
Brunswick, GA912/264-6161Savannah, GA
912/964-7370Dothan, AL
334/794-8691Troy, AL
334/566-4181Perry, FL
850/584-9200Tallahassee, FL850/575-5600
Aynor, SC843/358-5688
West Columbia, SC803/794-9340Simpsonville, SC864/963-5835
764 HSD 200-210 (149-157) 34,000 (15,422) J. Deere PowerTech Plus 6068H
CHART from page 32
Case’s 650L Crawler Dozer DesignedConfined Commercial Work AreasPractical for residential job
sites and confined commercialwork areas, the CaseConstruction Equipment 650Lcrawler dozer delivers 74 nethp (55 kW) through a four-cylinder, 4.5-L, electronicallyfuel-injected, turbochargedCase Family IV engine.Operating weights range from16,250 to 17,550 lb. (7,370 to7,959 kg).Low operating height allows
the 650L to work around lowoverhangs, while its lighterweight is ideal for work in softsoil conditions. The short trackmeans easier turning, makingthe machine extremely maneu-verable on the job site. Thecompact size also makes thecrawler dozer easy to transportfrom job to job. For more information, visit
www.casece.com.The Case 650L crawler dozer delivers 74 net hp (55 kW) through a four-cylinder,4.5-L, electronically fuel-injected, turbocharged Case Family IV engine.
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 31, 2012 • Page 35
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.
.komatsuamerica.comwww.komatsuamerica.com
RISH EQUIPMENT COMPANYwww.rish.com
Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100
Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901
Page 36 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SECT IONPaving
GOMACO Invitational #31 Attracts Golfers to Ida Grove
GOMACO Invitational #31drew golfers from acrossthe United States and
Canada to Ida Grove, Iowa, onSept. 18 and 19, 2012. Along withgolf, the Invitational also had anequipment display featuring a four-track GHP-2800 slipform paverwith the new GOMACO-exclu-
sive G+ control system. A demon-stration was held Tuesday morningfor Invitational attendees showcas-ing the paver, its control systemand G+ Connect. G+ Connect isGOMACO’s new proprietaryCAN-based network that allowsfast, two-way communicationbetween all accessories on a paver
and the G+ controller. Golfing events began at the Ida
Grove Country Club with thePutting Tournament. Two hundredand four putters participated in thetournament on four differentgreens. The top team from eachgreen then continued on to thePutting Championship. This year’s
championship team was ChrisGratton of Kansas HeavyConstruction in Shawnee, Kan.;and Mike Swanston of SwanstonEquipment Company in Fargo,N.D. The Contractors’ Shoot-Out startedimmediately after the PuttingTournament. Eighteen contractors
were divided into six, three-personteams for a five-hole competition,with the highest scoring team elim-inated on each hole. This year’schampionship team included:Thom Kuhn of Millstone Bangert,Inc., in St. Charles, Mo.; Gary
Pages 37-50
(L-R): Gary Highley of Millstone Bangert Inc.; LarrySmith of Road Machinery and Supplies Co.; Kevin Kleinof GOMACO; and Blake Driskell of Gerdan SlipformingInc, won the Mapleton Course cup.
Ida Grove Course Champions are all smiles. (L-R):Steve Baker of Baker Concrete and Excavating; BrianManatt of Manatts Inc.; Joe Conroy of Joe ConroyContractor Inc.; and Jill Godbersen of GOMACO.
(L-R): Austin Page of Blanchard Machinery; R.J.Bumann of GOMACO; and Bill Sweetser of SweetserConstruction Company took home the ScrambleTournament cup.
(L-R): Dennis Blum of Standard Forwarding; RonDibler of Millstone Bangert Inc.; Shannon Zobel ofGOMACO; and Matt McNett of Murphy Tractor andEquipment Company stand with their impressiveHolstein Course Champions trophy.
Putting Tournament Champions Mike Swanston (L) ofSwanston Equipment Company and Chris Gratton ofKansas Heavy Construction proudly hold their trophy.
(L-R): Contractors’ Shoot-Out Champions Thom Kuhnof Millstone Bangert Inc.; Gary Hutchins and CharlieWeaver, both of Weaver-Bailey Contracting, pose withtheir earned prize.
see GOMACO page 48
Page 38 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Serving the Asphalt Industry for 25 YearsServing the Asphalt Industry for 25 Years
2009 Stone BulldogTR34 TrenchCompactor, New-Unused, remoteoperation, 34” drums, 20 HP Hatz diesel
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 31, 2012 • Page 39
www.sakaiamerica.com1-800-323-0535
WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT,THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS.
It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, gettingbalanced high densities from the top through the bottom of the mat. Great on SMA, too! Andit provides a sound interlock between new overlays and profiled surfaces. It’s bonus time!
Check one out at your Sakai dealer today.
JAMES RIVEREQUIPMENT
Ashland, VA 23005804/798-6001
Burkeville, VA 23922434/767-5578
Chester, VA 23831804/748-9324
Fishersville, VA 22939540/337-3057
Fredericksburg, VA22408
540/373-2778Salem, VA 24153
540/380-2011Manassas Park VA 20111
703/631-8500South Hill, VA434/447-1325
Danville VA 24540434/822-6110
Richmond VA 23220840/358-6776
Winchester, VA 22602540/667-9777
Asheville, NC 28806828/667-0176
Charlotte, NC 28269704/597-0211800/532-6797
Greensboro, NC 27409336/668-2762 800/632-0376
Wilkesboro, NC 28697336/973-8201800/422-4193
Mt. Gilead, NC 27306910/439-5653800/692-9175
Asheboro, NC 27203 336/625-2212
Salisbury, NC 28144 704/636-2571
Matthews NC, 28104704/821-7399
Rock Hill SC 29730803/325-1555866/277-8119
Reynolds-Warren Equipment Companywww.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260
800/875-5659 • 404/361-1593
T
Page 40 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
FLORIDA
Pensacola, FL850-505-0550
Panama City, FL850-763-4654
ALABAMA
5336 Messer Airport Hwy.Birmingham, AL 35212
205-591-2131
Fax: 205-591-8321
Grove Hill, AL251-275-4158
Tuscumbia, AL256-383-5666
Dothan, AL334-678-1832
Mobile, AL 251-457-8991
Decatur, AL256-355-0305
Alabaster, AL205-621-2489
Tuscaloosa, A205-752-0621
Montgomery, AL334-288-6580
Oxford, AL256-831-2440
www.tractor-equipment.com
www.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260
800-875-5659 • 404-361-1593
Fax: 404-361-1885
RICHMOND MACHINERY &EQUIPMENT CO., INC.
1701 Roseneath Rd.Richmond, VA 23230
1-800-662-6485
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 31, 2012 • Page 41
SARASOTA PARTS
Sarasota, FL 34243941-752-1300
TAMPA PARTS
Riverview, FL 33569813-621-4902
MIAMI
Miami, FL 33166305-592-5740
WEST PALM BEACH
West Palm Beach, FL 33404561-848-6618
ORLANDO
Orlando, FL 32804407-299-1212
FORT MYERS
Ft. Myers, FL 33916239-334-3627
POMPANO BEACH PARTS
Pompano Beach, FL 33064954-977-9541
MELBOURNE PARTS
West Melbourne, FL 32904321-729-8944
NEW TAMPA
Lutz, FL 33559813-995-0841
NORTRAX
Page 42 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
POWER EQUIPMENTCOMPANY
3300 Alcoa HighwayKnoxville, TN 37920
(865) 577-5563
1487 Rock Springs RoadKingsport, TN 37664
(423) 349-6111
Highway 58 @153Chattanooga, TN 37406
(423) 894-1870
1290 Bridgestone PkwyLaVergne, TN 37086
(615) 213-0900
3050 Ferrell Park CoveMemphis, TN 38116-3502
(901) 346-9800
1545 Highway 45Saltillo, MS 38866
(662) 869-0283
RISH EQUIPMENTCOMPANYwww.rish.com
917 Cavalier Blvd.Chesapeake, VA 23323
(757) 485-2100(757) 485-3616
1410 West Hundred Rd.Chester, VA 23836
(804) 748-6411
133 Wise Mountain Rd.NW
Coeburn, VA 24230(276) 395-6901
Fax: (276) 395-3438
10214 Fayetteville Rd.Bealton, VA 22712
(540) 439-0668Fax: (540) 439-0719
5731 Glenmary DriveSalem, VA 24153(540) 380-4858
66 International laneSuite 102
Staunton, VA 24401(540) 887-8291
Fax: (540) 887-8295
REYNOLDS-WARRENCOMPANY INC1945 Forest ParkwayLake City, GA 30260
Putzmeister has announced its latest advancements in theareas of concrete spraying, mixing and transporting equip-ment for mining with the introduction of the SPM 4210WETKRET series and the Putzmeister MIXKRET 4.
Designed and manufactured by Putzmeister, the SPM4210 WETKRET series’ reinforced sprayingarm provides a verti-cal spraying reachof nearly 33 ft.(10 m), while themaximum concreteoutput of the dou-ble-piston pumpmounted on theequipment isnearly 26 cu. yd.per hour (20 cu mper hour). Its pro-portional remotecontrol can beoperated bothby cable andremote con-trol, allowingfor easy operation of the spraying arm,regulation of the concrete output, and adjustmentof the dosing pump. The SPM 4210’s axlesand reinforced turning system allow it toaccommodate the rough working condi-tions in mining.
“The new SPM 4210 incorpo-rates numerousnew designchanges, from thechassis to thespray arm,” saidPatrick Bridger,president ofP u t z m e i s t e rS h o t c r e t eTechno logy.“Additionally, itis now offered invarious powerconfigurations,which gives usersmore applicationoptions.”
The SPM 4210 WETKRET series includes three versionsthat are designed in accordance with different job siterequirements, allowing the equipment to be used in variousworking environments. The electrically operated, standardversion includes an on-board air compressor. The dual driveversion has a dual operating system, allowing all of its com-ponents to be operated either by diesel or electrically. Thisversion also is available with an on-board air compressor.Finally, the rotor version works with a rotor pump, whichallows the equipment to be used for both the wet and dryspraying process. It also includes an on-board air compres-sor.
Designed to improve efficiency in the concrete sprayingprocess in mining, Putzmeister’s new MIXKRET 4 low-pro-file concrete mixer provides a concrete transport capacity of4.4 cu. yd. (4 cu m) and includes a liquid additive tank fortransporting and transferring additives to the shotcrete equip-ment. Equipped with a six-cylinder, 176 hp (130 kW)engine, the machine offers significant climbing and moving
power, as well as the abilityto work at high altitudes. TheMIXKRET 4’s cab, mounted
in machine direction,along with the night-vision camera at the rear, facilitate
its maneuverability and ensure visibility at all times.Its compact design and modern axles provide
enhanced mobility and maneuverability in narrowgalleries and tunnels, while its hydrostatic transmission withstepless variable gear motor ensures an ideal torque to speedratio. Additionally, the MIXKRET 4 features an automaticspeed control system for moving down slopes fully loadedand traveling at the maximum secure speed.
“The new MIXKRET 4 is a great addition to our productoffering,” said Bridger. “Not only is it a concrete hauler, butit also is a mixer/transport machine ideal for blending fibersinto the concrete.”
For more information, visitwww.PutzmeisterAmerica.com.
SPM 4210 WETKRET
MIXKRET 4
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 31, 2012 • Page 43
Page 44 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Dynapac’s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features.
Designed to meet the needs of road contractors –
Dynapac – Providing Dynamic Compaction Solutions for over 70 years.
Doggett Construction & Forestry Equipmentwww.doggettgroup.com
St. Rose, LA 504.466.5577Covington, LA985.893.3005
Baton Rouge, LA225.291.3750Sulphur, LA
337.626.8503Alexandria, LA318.442.0455Monroe, LA
318.343.8787Shreveport, LA318.631.3090
Flint Equipment
Albany, GA229.888.1212
Perry, FL850.584.9200
Tallahassee, FL850.575.5600
Aynor, SC843.358.5688
Simpsonville, SC864.963.5835
W. Columbia, SC803.794.9340Adairsville, GA 770.773.9857Atlanta, GA
404.691.9445 Grovetown, GA706.855.5440Braselton, GA770.965.1889Columbus, GA706.687.3344Macon, GA
Pembroke Pines • 954/433-2800Plant City • 813/754-2727
West Palm Beach • 561/863-0570
North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030
Wilmington • 910/254-2031
South CarolinaColumbia • 803/794-6150Greer • 864/877-8962
North Charleston • 843/552-0095
Operating Max DigM
find us on
Ashland, VA • 804/798-6001Fishersville, VA • 540/337-3057Richlands, VA • 276/596-9440Salem, VA • 540/380-2011
Winchester, VA • 540/667-9777www.JamesRiverEquipment.com
www.facebook.com/linderindustrialmachinery
Page 46 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
POWER AND PRODUCTIVITY.Get More Done With Versatile Terex® Compact Equipment
You need a machine that offers the right combination of power and productivity. And that’s what you get with Terex® equipment.
We offer over 60 unique models within our construction product line. Our skid steer loaders, excavators, wheel Loaders, backhoes and compact track loaders provide the traction, maneuverability, reach and clearance you need to take control of demanding repetitive workloads.
Page 48 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Volvo Construction Equipment
www.ascvolvo.com
CORPORATE704-494-8100
GEORGIABuford
678-318-9500Savannah
912-964-8079Forest Park770-319-0074
NORTH CAROLINAAsheville
828-687-0620Charlotte
704-596-8283Greenville
252-754-5280Raleigh
919-661-8710
SOUTH CAROLINACharleston843-414-1120Columbia
803-791-0740Piedmont
864-704-1060
TENNESSEEChattanooga423-308-7940Knoxville
865-525-1845
THE ROAD TO PROFIT IS BUILT BY VOLVO.LET’S WORK.Volvo is your complete road building resource. The place to get it all is ASC Construction Equipment. A wide range of Volvo paving, compaction, grading – and construction equipment. All backed with expert, local support. Let’s work. Visit your local ASC dealer today.
Participants Test Skills WithVariety of Golfing ContestsHutchins and Charlie Weaver, both fromWeaver-Bailey Contracting in El Paso, Ariz.
Invitational activities began early onWednesday morning with the golfers head-ing out to the courses in Ida Grove, Holstein,Mapleton and Odebolt for the 18-holeScramble Tournament. Champion teamswere crowned from each course and had thehonor of advancing to a three-hole “Grand”Champion Shoot-Out in Ida Grove. The2012 “Grand” Champion team was from theOdebolt course and included Austin Page ofBlanchard Machinery in Moore, S.C.; BillSweetser of Sweetser ConstructionCompany in Fayetteville, Ark.; and R.J.Bumann of GOMACO. They finished theircourse with a score of 67, which was fiveunder the course par of 72.
Members of the top team from the IdaGrove course were Brian Manatt ofManatt's, Inc., in Brooklyn, IA.; Joe Conroyof Joe Conroy Contractor, Inc., in Topeka,Kan.; Steve Baker of Baker Concrete and
Excavating in Clermont, Iowa; and JillGodbersen of GOMACO. They finishedwith a score of 61, which was nine under thecourse par of 70.
Taking first place in Holstein was thefoursome of Dennis Blum of StandardForwarding in Waukee, Iowa; Matt McNettof Murphy Tractor and EquipmentCompany in Kansas City, Mo.; Ron Diblerof Millstone Bangert, Inc., in St. Charles,Mo.; and Shannon Zobel of GOMACO.They finished with a score of 62, which waseight under the course par of 70.
The champion team from Mapletonincluded Blake Driskell of GerdanSlipforming, Inc., in Cape Girardeau, Mo.;Gary Highley of Millstone Bangert, Inc., inSt. Charles, Mo.; Larry Smith of RoadMachinery and Supplies Co. in Des Moines,Iowa; and Kevin Klein of GOMACO. Theyfinished with a score of 61, which was nineunder the course par of 70.
For more information, visit www.goma-co.com.
GOMACO from page 37
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 31, 2012 • Page 49
INCREASE YOUR BONUS POTENTIAL.LET’S WORK.You need a partner you can rely on. Volvo Construction Equipment builds high-qualityroad building equipment backed by knowledgeable industry experts. We understand thatreliability and performance help you meet strict specifications, keeping you profitable and helpingearn your bonus. Our graders, milling machines, pavers and compactors are engineered to dojust that – keep you productive and give you the best shot at increasing your earning potential.
Learn how to increase your productivity by contacting a Volvo dealer near you.Visit volvoce.com/na today.
Volvo Construction Equipment
Page 50 • October 31, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Calder Brothers Corporation250 E. Warehouse Ct. | Taylors, SC 29687
Ed Turner, president and CEO, Allied ConstructionProducts LLC, has announced the addition of Sal LaCorte tothe position of shear and demolition manager. In his newposition, LaCorte will be responsible for the development ofthe sales activity for the attachments in Allied’s non-impacttools division including mobile shears and contractor’smechanical grapples.
LaCorte is a veteran of the construction equipment indus-try with more than 20 years in the industry, which includes aprevious stint at Allied as internal sales manager. His experi-ence at the manufacturing level includes product engineeringsystems design, territorial field sales management and OEMsales management. LaCorte has served on the Institute ofScrap Recycling Industries Inc.’s (ISRI) GovernmentRelations and Convention Committee and the AssociatedEquipment Distributors (AED) Government RelationsCommittee.
Through more than 200 U.S. and Canadian distributors,Allied offers a complete line of excavator, loader/backhoe,skid steer and mini-excavator mounted attachments, station-ary rock breaking systems and material handling systems.
For more information, call 216/431-2600 or visitwww.AlliedCP.com.
Sal LaCorte will be responsible for the development ofthe sales activity for the attachments in Allied’s non-impact tools division including mobile shears and con-tractor’s mechanical grapples.
Sal LaCorte NamedAllied’s Shear andDemolition Manager
Page 52 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
And Your Hitachi Dealers
9550 Statesville RoadCharlotte, NC 28269
704/597-0211Fax 704/596-6198
101 Bruce Rd.Asheville, NC 28806
828/667-0176Fax 828/667-4865
411 South Regional RoadGreensboro, NC 27409
336/668-2762Fax 336/668-3714288 Westgate Drive
Wilkesboro, NC 28697336/973-8201
Fax 336/973-8496305 N. Main St.
Mt. Gilead, NC 27306910/439-5653
Fax 910/439-4568
380 Anderson Road HighwayRock Hill, SC 29730
803/325-1555Fax 803/325-1506
2510 Highway 70 SWHickory, NC 28602
828/322-4300Fax 828/322-4244
2421 US Highway 64 EastAsheboro, NC 27203
336/625-2212Fax 336/625-0738
2725 Old Monroe RoadMatthews, NC 28104
704/821-7399Fax 704/821-4915805 Klumac Road
Salisbury, NC 28144704/636-2671
Fax 704/636-4827
11047 Leadbetter Rd.Ashland, VA 23005
804/798-6001Fax 804/752-7111
1711 E. Hundred Rd.Chester, VA 23836804/748-9324
Fax 804/530-1930Route 360 & 460
Burkeville, VA 23922434/767-5578
Fax 434/767-37743902 W. Main St.Salem, VA 24153540/380-2011
Fax 540/380-554798 Expo Road
Fishersville, VA 22939540/337-3057
Fax 540/337-1495
287 Victory RoadWinchester, VA 22602
540/667-9777Fax 540/667-94419107 Owens Drive
Manassas Park, VA 20111703/631-8500
Fax 703/631-47152055 South Boston Road
Danville, VA 24540434/822-6110
Fax 434/822-605510879 Houser Dr.
Fredericksburg, VA 22408540/898-8933
Fax 540/373-8842
Carolinas’ Division
Virginia Division
504 South Military Hwy.Virginia Beach, VA 23464
757/424-1900
333 Freedom Blvd.Yorktown, VA 23692
757/898-1900
Coastal Equipment Corpwww.coastalequipment.net
By Almudena CalatravaASSOCIATED PRESS
BUENOS AIRES, Argentina (AP)South American engineers are trying totackle one of the continent’s greatestnatural challenges: the towering Andesmountain chain that creates a costlyphysical barrier for nations ever-more-dependent on trade with Asia. Instead of pushing cargo over a
10,500-ft. (3,200-m) pass that is oftenblocked by snow for weeks, they planto build the longest tunnels in theAmericas right through the mountains.That would make billions of dollarsworth of Chinese electronics, Chileanwine, Argentine food and Brazilian carscheaper and more competitive. The proposed $3.5 billion private
railway known as the Aconcagua Bi-Oceanic Corridor would link train andtrucking hubs on both sides with a 127-mi.-long (205-km) railway, includingtwin 32-mi. (52-km) tunnels.Construction would take 10 years, butonce completed, it could save millionsof dollars and carve days off shippingtimes. As it stands, the only major Andean
pass in the southern half of the conti-nent is snowed in each winter, strand-ing hundreds of cargo trucks in temper-atures that can fall to minus 13 F(minus 25 C). And Pacific ports remaininaccessible to the Atlantic nation ofBrazil, whose trans-Amazonian high-way becomes a boggy mess evenbefore reaching the mountains. “There is a gigantic network of infra-
structure on both sides of the mountainrange with a bottleneck we must freeup,” said engineer Nicolas Posse, whois directing the project for CorporacionAmerica. The Argentine company leads a con-
sortium that proposed the project, andboth governments have committed to itas a matter of “national interest,” creat-ing a binational commission that isinviting bids. Initial feasibility studieshave already been submitted. Currently, much of the processed soy
oils, wine and meat Argentina sends toChina, as well as Asian electronics des-tined for Brazil, must first sail aroundthe tip of South America, adding near-ly 3,000 nautical miles and anotherweek to the trip. Shipping by railbetween Atlantic and Pacific portswould unite the most productiveregions of Chile and its SouthAmerican neighbors, making trademore competitive for all involved. The shipping cost would drop from
$210 to $177 a ton for cargo that nowmoves between Cordoba, Argentina,and Manzanillo, Mexico, the closest
major port with direct rail links to theeastern United States. “This project is just what’s needed,”
said Mauricio Claveri, an economistwith the Abeceb.com consulting firm inBuenos Aires. He called it a strategicnecessity for the Mercosur nations ofArgentina, Uruguay, Paraguay, Braziland Venezuela to develop more effi-cient trade links with China, Japan andSoutheast Asia. Trucking company owner Ivan
Caccia’s eyes light up when he calcu-lates his potential savings from the tun-nel, which promises to reduce theAndean passage from 12 hours to just 21/2 hours. Each trip Caccia & Sons trucks
make carrying wine and fruit betweenArgentina’s Mendoza province andChile’s capital of Santiago costs $1,400and takes two days. With the tunnel, itwould cost just $840 and his truckscould make it there and back in thesame day. “The economic part of this project is
important, but also the human aspect,because having a truck driver stuck inthe snow for three or four days isn’tvery pleasant,” he said. The world’s longest tunnel now in
operation links Japan’s two largestislands, Honshu and Hokkaido. Thatwill be surpassed in 2017 by theGotthard Base Tunnel, which will runfor 35 mi. (57 km) under the SwissAlps. The Andean consortium also
includes Japan’s Mitsubishi Corp.,Chile’s Empresas Navieras SA,Contreras Hermanos SA of Argentinaand Italy’s Geodata SpA, which helpeddesign other proposed tunnels linkingTurin, Italy, and Lyon, France, as wellas Europe and Africa through theStraits of Gibraltar. All those efforts had government
funding. What makes the Andean proj-ect unique is that it will be paid for pri-vately by the consortium and throughusage fees. The binational commissionwill provide loan guarantees, but put upno taxpayer money. Chile’s mining wealth and
Argentina’s agricultural bounty havesustained their economies, deliveringpositive trade balances year after year,but both countries need to produce andmove those exports more efficiently tomaintain growth. Chile imported $75billion worth of goods and exported$81 billion last year, while Argentineimported $74 billion and exported $84billion, the U.N.’s regional economicscommission reported Tuesday. The project takes its name from
nearby Aconcagua mountain, whichdominates the border and is the highest
peak in the Americas at 22,822 ft.(6,981 m) above sea level. The train engines, which would be
powered by electricity rather than coalor diesel to reduce the environmentalimpact, are to link a transportation hubin Lujan de Cuyo on the Argentine sidewith Los Andes, Chile. The tunnels willdescend from Punta de Vacas,Argentina, at 7,851 ft. (2,393 me)above sea level, to Saladillo, Chile, at5,039 ft. (1,536 m), both below thesteeper slopes and higher altitudes thatget paralyzing snow each winter. The initial phase would open a single
tunnel and cost $3.5 billion with acapacity of 24 million tons of cargo ayear. Depending on demand, the capac-ity could grow to 77 million tons andthe total price tag to $5.9 billion byadding a second tunnel and additionalrail lines on either side. As many asfour mechanical excavators will beused to carve through the mountains. “It’s a multimodal system: It works
like a ferry. Each train, about 750meters long, can transport containers ofmerchandise and trucks with their driv-ers as well as other train formations,which would switch locomotives tomake the crossing,” Posse said. Theidea is to enable cargo to make theentire journey between Atlantic andPacific ports without having to betransferred along the way. Any megaproject faces difficulties in
a region as politically and economical-ly unstable as Latin America. To startwith, there’s no guarantee that the con-sortium will win the bid, althoughCorporacion America and EmpresasNavieras are corporate leaders inArgentina and Chile, and Mitsubishi isone of the world’s largest trading com-panies. Posse said there’s nothing particular-
ly challenging about the Andes thatengineers aren’t already resolving inthe Alps. “An enormous amount of under-
standing has developed in the last 20years and this is a huge advantage,” hesaid. “What has been learned digginglong tunnels is that the most importantthing is to be obsessively prepared forwhat might happen in the field.” And promoters say it will pay for
itself and more through cargo fees thatcompanies the world over will gladlypay to speed their products to market. “We’re betting on reducing the trav-
el time to a third of what it is now, andthus bringing more profits all around.We’re talking about cargo fees that willmake the shipments cheaper andArgentine and Chilean exports morecompetitive,” Posse said.
Andes Tunnel to Speed Up Trade
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 53
1128 Hwy 70 WestGarner, NC 27529
919/772-2121Fax 919/779-5432
3604 Highway 264EGreenville, NC 27834
252/758-4403Fax 252/758-6508
3816 Martin Luther King BlvdNew Bern, NC 28562
252/638-5838Fax 252/638-2949
5039 US 301 SouthFayetteville, NC 28348
910/424-1200Fax 910/424-8763
Northside Industrial ParkWilmington, NC 28429
910/675-9211Fax 910/675-3640
Highway 42 Aulander RoadAhoskie, NC 27910
252/332-5550Fax 252/332-4186
Flint Equipment Company1206 Blaylock St. Albany, GA 31705
229/888-1212Fax: 229/435-3612
180 Princeton Blvd.Adairsville, GA 30103-2628
770-773-9857Fax: 770-773-7226
4500 Wendell Dr. SWAtlanta, GA 30336-1627
404/691-9445Fax: 404/696-1170
5333 BBS WayBraselton, GA 30517-1707
770-965-1889Fax: 770-965-1894
251 Perry Lane Road Brunswick, GA 31525
912-264-6161Fax: 912-264-5263
2400 Victory Dr.Columbus, GA 31902-3457
706/687-3344Fax: 706/682-4738
515 Chamblin Rd. Grovetown, GA 30813-3905
706/855-5440Fax: 706/855-5447
136 Acres DriveLadson, SC 29546
843/572-0400Fax: 843/572-7746
4600 Pio Nono AveMacon, GA 31206-5064
478/788-1586Fax: 478/781-8591
7566 W. TENNESSEE ST. Tallahassee, FL 32304
850/575-5600Fax: 850/575-9972
3033 US Highway 27 East Perry, FL 32348850/584-9200
Fax: 850/584-2844
169 Ross Clark Circle N.E. Dothan, AL 36303
334/794-8691Fax: 334/794-8696
50 Morgan Industrial Blvd. Garden City, GA 31408
912/964-7370Fax: 912/964-1822
1220 Henderson HWY Troy, AL 36081 334/566-4181
Fax: 334/566-4361
4900 East Highway 501 Aynor, SC 29511
843/358-5688Fax: 843/358-2826
116 Corporate Drive Simpsonville, SC 29681
864/963-5835Fax: 864/963-7405
4717 Jefferies Hwy Walterboro, SC 29488
843/539-1420Fax: 843/539-1424
3464 Sunset Boulevard West Columbia, SC 29169
803/794-9340Fax: 803/794-9346
178 Seaboard RoadAndrews, SC 29510
843/221-4940Fax: 843/221-4942
EquipmentCompany
t h e C O L O R o f Q U A L I T Y
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.running, greaterengines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.-than-ever horsepower greater r-than-ever horsepower
engines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
Tier 4-certified
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities., arm force,-than-ever horsepower
engines while maximizing your productivity with smooth-ier 4-certified ning Interim T
engines while maximizing your productivity with smooth-ier 4-certified
.hitawwww.hitachiconstruction.com
new crop of Dash-5 excavators.
t h e C O L
.hitachiconstruction.com
new crop of Dash-5 excavators.
A L I T Y
new crop of Dash-5 excavators.
UO R o f Qt h e C O L
A L I T Y
Page 54 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Dozer Simulater, Door PrizesFeatured Throughout Event
The John Deere 850K dozer simulator was a very popular item during the openhouse.
Larry Atwood, Tidewater Utilities, Virginia Beach, Va., and Suzi Wright, CoastalEquipment Corporation, discuss the John Deere 85D excavators. Tidewater Utilitieshas several of them on rent from Coastal.
(L-R): Matt Laws, Interstate Trailers, goes over the 40DLA, a 40-ton tagalong trailerwith Brady Neil and J.T. Salamon, Mid-Atlantic Petroleum Services, Chesapeake, Va.
COASTAL from page 8
CUSTOMER APPRECIATION LUNCHES TO BE HELD AT MURPHYTRACTOR / Technology Workshop Dates Include:Friday, November 16th in Kansas City, MOTuesday, November 27th in Springfield, MO – addedTuesday, December 4th in Painesville, OHWednesday, December 5th in Poland, OHWednesday, December 12th in Cranberry Township, PA
(this date moved from December 6th to December 12th)Thursday, December 13th in Cincinnati, OHFriday, December 14th in Canton, OHWednesday, December 19th in Vandalia, OHThursday, December 20th in Lima, OH
Minnesota Nursery & Landscape Association (MNLA) – Successful BusinessGrow Here!2012 EVENTS CALENDAR:November 2th thru November 6th – 2012 IRRIGATION SHOW & EDUCATION CONFERENCENovember 8th thru November 10th – TCI EXPO 2012 in BALTIMORENovember 16th – 9:00 AM CST – 3:30 PM CST –PESTICIDE RECERTIFICATIONJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: PERME-ABLE PAVER SYSTEMS CERTIFICATE COURSEJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY: LAND-SCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE)January 9th thru 11th, 2013 – NORTHERN GREEN EXPO. This event features a trade show, educational sessions, and networking events.***Please contact MNLA at [email protected] or call toll free: 888-886-6652for more information.
AGC of AMERICA is pleased to offer a wide variety of meetings, events and sem-inars for construction professionals that can help you improve every aspect of yourbusiness.
AGC of ST. LOUISThe Associated General Contractors of St. Louis cordially invites you to attend theCONSTRUCTION AWARDS GALA featuring the Construction Keystone Awards andthe Specialty Contractor of the Year Awards on Thursday, November 1, 2012 at theRenaissance Grand Hotel, 800 Washington Avenue, St. Louis, MO. Cocktails:5:30 PM and Dinner and Program: 6:30 PM.Special Event Parking – Event parking is complimentary whether valet or self-park-ing. Self-parkers must park in the garage at 9th & Washington. Please RSVP byWednesday, October 24, 2012 at 5:00 PM. For Questions, please contact DeniseHasty @ 314/480-3181 or [email protected].
AGC of MINNESOTA525 Park Street, #110, St. Paul, MN 55103-2186Telephone: 651/632-8929 or 800/552-7670 Fax: 651/632-8929Email: [email protected] Website: www.agcmn.org
Build America Award Application AvailableThe 2013 AGC/Alliant Build America competition is open to general contractorsand specialty contractors who are current members of an AGC chapter working asprime contractors for projects completed between November 1, 2011 andNovember 1, 2012. Member companies can visit http://awards.agc.org/ to begina project entry. (Please note that this is a newly developed site and will be con-tinually updated throughout the duration of the awards season. Thank you inadvance for your patience and cooperation.) The final deadline for all submissionsis Friday, November 2, at 5:00 pm EST. Winners will be announced at AGC’s 94th
Annual Convention in Palm Springs, California next March.
AGC of St. LouisINSIDE INSIGHT LUNCHEON - WEDNESDAY, NOVEMBER 14thGREENBRIAR HILLS COUNTRY CLUB, ST. LOUISRegistration: 11:15 AMLunch: 11:45 AM Speaker: 12:15 PMAdjourn: 1:15 PMInside Insight is an AGC of St. Louis quarterly speaker series designed to giveyou just that – the INSIDE INSIGHT on public policy issues. Cost: $35 for AGC of St. Louis Members, $70 forNon-MembersPlease register by Friday, November 9th. Reservations cancelled after thisdate will be billed. Register online at http://events.agcstl.org/imispulbic/Questions??? Call the AGC of St. Louis at 314/781-2356www.agcstl.org
AGC of MINNESOTAAnnual Business Meeting Notice: Notice is given to the voting members of ASSO-CIATED GENERAL CONTRACTORS OF MINNESOTA, a Minnesota cooperative organ-ization (the “Association”), that the November 2012 annual meeting of votingmembers will be held at the Marriott Minneapolis Southwest, 5801 Opus Parkway,Minnetonka, Minnesota 55343, at 12:00 noon, on Thursday, November 29,2012.
AGC of America Annual Convention: Registration is now open for the 2013 AGCAnnual Convention and Constructor Expo, being held March 6 – 9 in Palm Springs.The early bird discount, a $200 savings, is available until January 16. Roomavailability at the convention headquarter hotel (JW Marriott Desert Springs) is lim-ited, so reservations should be made as early as possible. Complete conferencedetails are available at http://convention.agc.org or you may contact DeniseWoods, CMP, Director, Communications & Events, AGC of Minnesota, directly at651/796-2186; toll free at 800/552-7670 or website: www.agcmn.org. Build America Awards Application: The 2013 AGC/Alliant Build America compe-tition is open to general contractors and specialty contractors who are currentmembers of an AGC chapter working as prime contractors for projects completed
between November 1, 2011 and November 1, 2012. Member companies canvisit http://awards.agc.org/ to begin a project entry. The final deadline for all sub-missions is Friday, November 2, at 5:00 Pm EST. Winners will be announced atAGC’s 94th Annual Convention in Palm Springs, March 6th thru 9th.
2013 MAASTO CONFERENCE: The Wisconsin Department of Transportation willhost the Mid-America Association of State Transportation Officials (MAASTO) 2013Conference – “Sharing Strategies for Success.” The conference will be held JULY16-19 at the HILTON HOTEL in downtown Milwaukee. One of the major events atMAASTO 2013 will be a trade show, where industry representatives will have theopportunity to showcase materials, technology, and professional services. Thetrade show will be held July 17 and 18 at the conference hotel. More informationon the trade show registration, layout, schedule, and fees will be available in early2013 at the conference website, which will be linked via the MAASTO meetingswebpage – http://www.maasto.net/meetings.html. If you are looking to speak tosomeone with regard to the above conference you may contact Denise Woods,CMP, Director, Communications & Events, AGC of Minnesota, directly at 651/796-2186; toll free at 800/552-7670 or website: www.agcmn.org.
*** For more information on the above AGC of Minnesota events, you may con-tact Denise Woods,CMP; Director, Communications & Events, AssociatesGeneral Contractors of Minnesota, 525 Park Street, #110, St. Paul, MN55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX: 651/632-8928;TOLL FREE: 800/552-7670 and/or www.agcmn.org.
Georgia Utility Contractors Association, Inc.2012 3rd Quarter Safety Training ScheduleTopics Include: . Competent Person Excavation. Confined Space Entry Program. Damage Prevention/GUFPA Law/PSC. ISEE Blasting Certification. Temporary Utility Workzone Traffic Control. NPDES Level 1A Course and Exam*. NPDES Level 1A Recertification Course*. NPDES Level 1B Course and Exam*. GDOT Approved Flagging Program. GDOT Approved Flagging Instructor Program
*No Checks accepted less than 5 days prior to class date payment reserves theseat for class – we do not save seats. For more information on the above classeswhich include dates/locations/costs, please contact Scott Brumbelow, AssistantExecutive Director, GUCA, 404/362-9995.
GUCA 804 Main Street, Suite C, Forest Park, GA 30297404/362-9995, 877/SAF-GUCA, Fax: 404/362-9211www.guca.com2012 FLORIDA Contractor Associations Meetings Postings:
New Installations: Wednesday, October 10th and Tuesday, December 4th NASTT’s
mission is to advance trenchless technology and to promote its benefits for thepublic and the environment by increasing awareness and knowledge through infor-mation dissemination; research and development; education and training; andpartnerships with organizations and agencies interested in trenchless technologyand its benefits. NASTT provides a representative voice for all sectors of the trench-less technology industry. For more information about NASTT and the variety oftraining opportunities provided, please visit www.nastt.org or contact Michelle Hill,Communications & Training Manager at 440/638-4676 or [email protected].
MNSW – ROAD – INST – SCHEDROAD INSTITUTE 2012 – 2013 Schedule Announced!!!Road Institute R will soon begin its 48th year as the asphalt paving industry’s pre-mier training school, providing practical instruction for industry professionals. Volvo Construction Equipment has announced the 2012 – 2013 schedule for theRoad Institute. The course curriculum offers two- to five-day sessions that beginin October and continue through May 2013, with classes held at two training facil-ities in North America – one in Chambersburg, PA and the other in Phoenix, AZ.“The Volvo commitment to training includes offering this program as a service tothe industry and providing others the opportunity to learn best practices in a con-trolled environment with a focus of instruction and training dedicated to asphaltpaving,” said Wade Turlington, Director of Product and Sales Education. “The RoadInstitute is dedicated to providing quality instruction to industry professionals, evenif they don’t own or operate Volvo equipment.” 2012 – 2013 Road Institute Course SCHEDULE includes topics such as:. Automatic Grade and Slope Systems. Large Asphalt Compactor Mechanics (Step 1). Large Asphalt Compactor Mechanics (Step 2). MT2000 Hydraulic and Electrical Systems (Step 1). MT2000 Hydraulic and Electrical Systems (Step 2). MW500 Hydraulic and Electrical Systems (Step 1). Paver and Compactor Operation and Maintenance. Paver and Compactor Operation and Maintenance, warm-mix asphalt (WMA). Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 1). P aver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step 2). Paver Hydraulic and Electrical Systems – Blaw-Knox R Pavers (Step 1). Paver Screed Operation and Adjustment. Paving and Compaction Application Seminar. Small Asphalt Compactor Mechanics (Steps 1 and 2). Soil Compaction Application Seminar. Soil Compactor Mechanics (Step 1). Soil Compactor Mechanics (Step 2)Class size is limited for ideal instructor-to-student ratios and team learning. Tuitionis $750 (USD) per student per three to five day course or $500 (USD) per studentper two day seminar. For more information on the Road Institute or to register forclasses, visit roadinstitute.com or call 866/497-4501 or email: [email protected].
BusinessCalendar
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 55
Volvo Construction Equipment
MAXIMIZE EFFICIENCY. MINIMIZE COSTS.LET’S WORK.Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusiveOptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates.With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and ahigher earning potential for you.
Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.
9601 BOGGY CREEKORLANDO, FL 407-659-8700
407-659-8720 (FAX)DAVIE
954-581-4744JACKSONVILLE904-737-6000
ORLANDO407-850-9614
TAMPA813-630-0077
FT. MYERS239-481-8554
FLORIDACOWIN
EQUIPMENT CO.,INC.
7950 PITTMAN AVE.PENSACOLA, FL
32534800-239-4736850-479-3004
CHESAPEAKE757-485-3314RICHMOND
804-266-0000ROANOKE
540-989-3750
WISE276-328-8027
MANASSAS, VA703-393-7344
WINCHESTER, VA540-722-3700
BIRMINGHAM800-239-2694
MOBILE800-223-6755MONTGOMERY800-239-6642
MADISON256-350-0006HUNTSVILLE800-239-7368
OXFORD800-917-7931
GEORGIAASC
CONSTRUCTIONEQUIPMENTSAVANNAH
912-964-8079BUFORD
678-318-9500FOREST PARK 770-319-0074
SOUTH CAROLINAASC
CONSTRUCTIONEQUIPMENTCOLUMBIA
803-791-0740PIEDMONT
864-704-1060NORTH
CHARLESTON843-414-1120
NORTH CAROLINAASC
CONSTRUCTIONEQUIPMENTASHEVILLE
828-687-0620CHARLOTTE
704-596-8283RALEIGH
919-661-8710GREENVILLE252-754-5280
TENNESSEEASC
CONSTRUCTIONEQUIPMENT
CHATTANOOGA423-308-7940KNOXVILLE
865-525-1845
FLORIDAFLAGLER CONSTRUCTION EQUIPMENT LLC
WWW.FLAGLERCE.COM
VIRGINIAMCCLUNG-LOGAN EQUIPMENT
COMPANY
ALABAMACOWIN EQUIPMENT CO., INC.
Page 56 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GREENSBORO TRACTORwww.greensborotractor.com2820 S. Elm-Eugene StreetGreensboro, NC 27406
336-273-3606
EVERYTHING YOU VALUE
Bobcat Packs Increased Power inIts T750 Compact Track LoaderBobcat’s T750 joins the Bobcat M-
Series loader line, which includes theT630, T650, T770 and T870 compacttrack loaders and the S630, S650 andS850 skid steer loaders. All Bobcat M-Series loaders share features such asimproved power and performance, bet-ter visibility and operator comfort,according to the manufacturer.The T750 delivers a lift height-to-
hinge pin measurement of 132 in. (335cm) — more than 3 in. (7.6 cm) higherthan a T300 and features a 23-gal. (87L)-per-minute standard hydraulic flow— 11 percent more than the T300 itreplaces. The T750 has an operating weight of
10,327 lbs. (4,684 kg), a rated operat-ing capacity of 3,325 lbs. (1,508 kg)and is powered by an 85-hp (63 kW)turbo-diesel engine.
Production Is Key to Profitability
The hydraulic systems on M-Seriesloaders have been engineered for high-er standard flow and pressure that giveattachments more power to work morequickly. New job-enhancing features were
added to the optional deluxe instru-mentation panel. Available only on M-Series machines, the panel intelligentlymonitors key loader functions, and thekeyless start helps prevent theft. Thenew 5-in., full-color LCD screen offersbetter readability and interaction. Easy-to-read virtual sweep gauges allow theoperator to quickly read and under-stand the machine’s performance.
Increased UptimeThe loaders are designed to work
long hours on demanding job sites, andoperators want to spend minimal timeon routine maintenance to start theworkday earlier. Simple checks make iteasier to perform maintenance correct-ly at the proper intervals, according tothe manufacturer. The auxiliary hydraulic quick cou-
plers are mounted directly to the frontplate of the lift arm to provide a solidmounting, and hoses are routedthrough the loader arms for better pro-tection. A guard bar extends in front ofthe coupler for added protection. Keeping the loader cool when work-
ing long hours is important in prolong-
ing the service life of the machine. Thatis why Bobcat designed the coolingsystem on the M-Series for increasedefficiency and higher performance. Thenew design also makes it easier to cleanout the cooling system, with an oilcooler that swings up, allowing theoperator to clean the area between theoil cooler and the radiator.
Improved VisibilityThe T750, like other M-Series
loader models, features a cab-forwarddesign that moves the operator closer tothe attachment and provides enhancedvisibility in all directions. Visibility is provided to the cutting
edge of the bucket or the corners of anattachment because of the large cabdoor. The cab door threshold has beenlowered and the overall surface of thedoor has increased more than 40 per-cent to provide improved visibility andmake it easier for operators to enter andexit the cab. Windows on the sides and rear of the
cab also have been increased in size toprovide more visibility to the tires andto the rear. The larger top windowmakes it easier and more comfortablefor the operator to see the attachmentwith the lift arms raised, an advantagewhen loading trucks or performingother tasks.
Cab ComfortComfortable operators are more pro-
ductive, so to create a better workingenvironment, Bobcat increased the sizeof the M-series cab by 10 percent,improved cab pressurization anddesigned the interior to allow operatorsto adjust the environment to their indi-vidual preferences. Bobcat M-Series loaders have a
pressurized cab, with a new one-pieceseal that goes all the way around thedoor and fits into a special curvedpocket. This minimizes the amount ofdirt and dust that might enter the cab,creating more enjoyable working con-ditions and making it easier to clean thecab. Noise is another factor affecting
operator comfort, and Bobcat reducedthe sound level of M-Series loaders bymore than 60 percent. New enginemounts improve isolation to decreasevibration and reduce sound levels. The control levers on the optional
selectable joystick controls (SJC) moveup and down in conjunction with theseat to reduce arm movement andfatigue as the operator controls themachine. The joystick mounts slideforward or backward to adjust to thepreference of each individual operator. For more information, visit
www.bobcat.com.
The T750 delivers a lift height-to-hinge pin measurement of 132 in. (335cm) — more than 3 in. (7.6 cm) higher than a T300 and features a 23-gal.(87 L)-per-minute standard hydraulic flow — 11 percent more than theT300 it replaces.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 57
JCB of Georgia1008 E Hwy 80Pooler, GA 31322888-431-0130
2679 Barrett Lakes BlvdKennesaw, GA 30144678-594-5400
4008 Mike Padgett HwyAugusta, GA 30906888-431-0130
www.jcbofgeorgia.com
Page 60 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
You asked. We delivered. Our D-Series SkidSteers are loaded with customer-recommendedenhancements, like larger operator stations,quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options suchas electrohydraulic joysticks, variable boomand bucket speed settings, and more than 100 attachments to let you take on more tasks.
Packed full of best-in-class productivity anduptime-enhancing features, the D-Series aredestined to become owner and operatorfavorites. Ask for a demo today.
The Difference is in the D-tails.
www.johndeere.com
KS1CUFFOO34N-00268028
Ashland, VA 23005804/358-6776
Burkeville, VA 23922434/767-5578Fishersville, VA540/337-3057Richland, VA276/596-9440
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 65
CATERPILLAR 613B PADDLE SCRAPER| NEED BOTH UPPER CHAIN IDLERSAND THE MOUNTING BRACKETS. ALSONEED BOTH MOUNTING BRACKETS. CONTACT: SIDPHONE: 281-389-7777EMAIL: [email protected]––––––––––––––––––––––––––––––––GPR MACHINE | A G.P.R GROUND PEN-ETRATIVE RAIDERCONTACT: ISAAC YAMOAHPHONE: +233541556965EMAIL:[email protected]––––––––––––––––––––––––––––––––WHEEL LOADER | 966C, 966D, 966ECONTACT: ALHARTIPHONE: 00966540222206FAX: 00066541111407EMAIL:[email protected]––––––––––––––––––––––––––––––––1989 416 CAT TRANSMISSION USED |.J8 2411 6Y2589 416 1989 CATERPILLARTRAN #CONTACT: STEVEN SCHMIDTPHONE: 509-280-1926EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHER | LATE MODEL LOWHOUR USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 235C, 225, 966E, D, FII, 970F, 972GI |SEND PICTURES AND THE FINALPRICES FOBCONTACT: ABDELGAWAD ALIEMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS |LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT, TRUCKS AND VEHICLESOF ALL SORTS. WE PREFER IN BULK,IF YOU HAVE COMPUTERIZED YOURSERVICE OR PARTS OPERATION ANDYOU HAVE BOOKS OR MANUALS YOUNO LONGER NEED, OR INVENTORIESYOU HAVE NOT SOLD, AS A DISCON-TINUED PRODUCT LINE, WE WILL PUR-CHASE IN ANY USEABLE CONDITION INANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACTOR | USED 25-50 HPCONTACT: CRAIGPHONE: 6622955517EMAIL: [email protected]––––––––––––––––––––––––––––––––MILLER CST 280 WELDING MACHINESCONTACT: MARK RAFANIELLOPHONE: 7184900597FAX: 7182383073EMAIL:[email protected] ––––––––––––––––––––––––––––––––
LOOKING TO PURCHASE USED FRACTANKS NO OLDER THAN 2 TO 3 YEARSOLD. I AM LOOKING TO PURCHASEANYWHERE FROM 15 TO 50 TANKS.I’VE GOT 70 NEW 102” CT OILFIELDFRAC TANKS W/ EXTERNAL MANI-FOLDS AND AM INTERESTED IN PUR-CHASING MORE USED FRAC TANKSCONTACT: SUSANPHONE: 512-236-0060, EXT 127EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME 12 MONTHS A 7DAYS BULLDOZER D3AT D10 2007 ANDUP USER USA USA CONTRACTORONLYCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED 331D BOBCAT EXCAVATOR FORPARTS. BAD MOTOR OKCONTACT: DON SMITHPHONE: 870-793-2147 OR 501-268-2041FAX: 870-793-3452EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR TBM MACHINE. NEEDTBM MACHINE 15 METERS DIAMETER.PLEASE SEND ME CATALOG AND BID. CONTACT: ALI BERBERPHONE: 00905425190635EMAIL: [email protected]––––––––––––––––––––––––––––––––FIAT ALLIS 14C DOZER | NEED MOTOR,OR COULD SELL FOR PARTS.CONTACT: PHIL DZIARDZIELPHONE: 307-359-0543FAX: 307-358-2039 |EMAIL:[email protected]––––––––––––––––––––––––––––––––GOOD USED DEERE 50D EXCAVATOR,OPEN ROPS IN VERY GOOD CONDI-TION. BOBCAT ALSO CONSIDERED.CONTACT: SCOTT H. CLYDEPHONE: 307-670-1024FAX: 866-290-8327EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED A 4 N 1 BUCKET FOR A CATERIL-LAR 941B CRAWLER/LOADERCONTACT: SIDPHONE: 281-389-7777FAX: 936-327-7777 |EMAIL:[email protected]––––––––––––––––––––––––––––––––LR DIESEL 185 TOWABLE AIR COM-PRESSOR WITH LOW HOURS.CONTACT: DAN THRAENPHONE: 319-265-1080EMAIL: [email protected]––––––––––––––––––––––––––––––––HITACHI EXCAVATORS EX200 & DYNA-PAC ROLLERS/COMPACTORSCA251/CA262 | NEED HITACHI EXCAVA-TORS EX200-1, EX200LC-1 & DYNAPACROLLERS CA251, CA262, CA301,CA362. SEND DETAILS, PICTURES OF
MACHINE & YOUR BEST PRICE.CONTACT: HIDAYAT KHANPHONE: +92-345-8818803EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR WHEEL LOADER950/B/E, 966/C/D/E/F | LOOKING FORCATERPILLAR WHEEL LOADERS , 950,950B, 950E, 966D, 966E, 966F.OFFER &SEND DETAILS, PICTURES OFMACHINE & YOUR BEST PRICE.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––1999 OR NEWER CATERPILLAR BACK-HOE LOCATED IN THE SOUTH EAST-ERN UNITED STATES, NO MORE THAN1,000 MILES FROM FORT MYERS,FLORIDA. MACHINE MUST HAVE 4X4, ACAB WITH WORKING AIR CONDITION-ING AND A 4-IN-1 BUCKET. PRICED AT$25, 000 OR UNDER.CONTACT: WARRENEMAIL: [email protected]–––––––––––––––––––––––––––––––– USED ORANGE PEEL GRAPPLE FORMETAL SCRAP LOADING CAP.OF 8000-10000 LBSCONTACT: MARTIN ARZATEPHONE: 915-317-3682EMAIL: [email protected]–––––––––––––––––––––––––––––––– GRIZZLY ROCK SCREEN | WANTED AROCK SCREEN TO SEPARATE 4 TO 6”AND LARGER FROM DIRT.CONTACT: LARRY CRAFTPHONE: 850-545 7863EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED A DOOR FOR A CASE 465 SKIDSTEER | NEW OR USEDCONTACT: DOUG WIMERPHONE: 304-668-5057EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEEDED TRUCK 777F 785 797 2005 ANDUP USER USA NO SALEMAN ONLY MINIG PLEASECONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]–––––––––––––––––––––––––––––––– JLG UT612 DROP DECK TRAILER OREQUIVALENT. DUAL AXLE DECK SIZE 6 X 12 MUST BE IN GOOD SHAPECONTACT: BJ BELLPHONE: 256-654-5041FAX: 256-462-3649EMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED KOMATSU WHEEL LOADERWA600, WA900 , FORKLIFT 32 TON, 42TON, 1995 UPCONTACT: SALEHPHONE: 0567029867EMAIL: [email protected]––––––––––––––––––––––––––––––––
KALMAR FORKLIFT. DCD320-12LB,DS15-1200, DC 16-1200, DC20-1200.CONTACT: AHMEDEMAIL: [email protected]–––––––––––––––––––––––––––––––– NEED BULLDOZER D7G AND D7H WITHWINCH OR RIPPER, USA USER PLEASE NO SALEMANCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]–––––––––––––––––––––––––––––––– CRAFCO/CIMLINE TWR MELTER WITHHEATED HOSE.CONTACT: DAN MILLERPHONE: 908-362-5414EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU DOZERS | I AM LOOKINGFOR THE FOLLOWING USED KOMATSUDOZERS: D 6 5 D 8 5 D 1 5 5 EMAIL USWITH PICTURES, SERIAL NUMBER,YEAR MODEL, PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM PAYINGCASH FOR BOBCAT BRAND SKIDSTEER LOADERS. ESPECIALLY LOOK-ING FOR LARGE FRAME AND "GOLDPACKAGE" MACHINES, BUT ANY MAKEAND MODEL BOBCAT CONSIDERED.SEND PHOTO AND ASKING PRICE.***DEALERS NEED NOT RESPOND***CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHERS | LATE MODEL LOWHOUR WORK READY USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CATEPILLAR 3412 | LOOKING FOR THESPIDER ASSEMBLY AND THE SHAFTINPUT FOR THE 3412 CATERPILLAR.THE SPECS ARE AS FOLLOWS: SERIAL# 60M03370 ARRANGEMENT# 4N2247CLUTCH DESCRIPTION: MODEL#GM518-1 SERIAL # 3R5140 BOM# 37705RATIO# 6.48:1 I AM LOOKING FORTHEM NEW OR USED.CONTACT: ROBIN MILLERPHONE: 7867525438EMAIL:[email protected]––––––––––––––––––––––––––––––––YANMAR EXCAVATORCONTACT: JOHN SARAPPAPHONE: 856 767 1122FAX: 856 767 4931EMAIL: [email protected]––––––––––––––––––––––––––––––––
MAS HEAVY EQUIPMENT | LOOKINGFOR EXCAVATOR DAEWOO OR DOS-SAN 290 LCV/300LCV/420LCV/470LCVCATERPILLAR 235 C OR D /225 SAM-SUNG 280-2 WHEEL LOADER CATER-PILLAR 920-930-936-950-966D E F -970F966G -972G-980G-980F DOZER CATER-PILLAR D9N&D10N KOM. 355CONTACT: MODY SHOUKRYPHONE: 8155435252 FAX: 8153986715EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRAULIC DRIVE MOTOR FOR ADITCH WITCH 5020 TRENCHERCONTACT: RICHARD SPRIGGSPHONE: 423-487-5048 EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED FAST KOMASTU 155A X 6 2009WITH RIPPER USER LOW LOW HOURS INEED 2CONTACT: JEAN MAURICE BOUTINEMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEBUY ALL KINDS OF CONSTRUCTION,FARM AND HEAVY EQUIPMENT MANU-ALS. I PREFER TO BUY 100 OR MOREMANUALS PREFERRABLY FROM BUSI-NESS COMPANIES. IF YOU’RE TIREDOF LOOKING AND STORING EXCESSMANUALS, PLEASE GIVE ME A CALL AT270-849-2270 OR EMAIL AT [email protected]. THANKS GRACECONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––WATER TRUCK | NEED USED WATERTRUCK. 10, 000-15, 000 CAP. MINE SITESPEC IF POSSIBLECONTACT: ROB KOHLERPHONE: 0411277332EMAIL:[email protected]––––––––––––––––––––––––––––––––LEFT REAR PLANATARY FOR CASE721C | DESCRIBE WHAT YOU WANT.CONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:[email protected]––––––––––––––––––––––––––––––––FT REAR PLANATARY FOR CASE 721CCONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:[email protected]––––––––––––––––––––––––––––––––BOMAGCONTACT: KENNYEMAIL: [email protected]––––––––––––––––––––––––––––––––ANY TRACK MACHINE CONSIDEREDCONTACT: DAYNAPHONE: 832-603-2097EMAIL: [email protected]––––––––––––––––––––––––––––––––
DUSTLESS BLASTER MODEL DB500CONTACT: MICHAELPHONE: 314-796-6558EMAIL: [email protected]––––––––––––––––––––––––––––––––( 3 ) CAT 769C OR TEREX R50 OR CAT773B TRUCKS | WORK READY TRUCKS,MIDWEST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––TEREX TA30 GEN 7 OFF ROAD TRUCKS| (2 ) 2007-2008 TRUCKS, MAX. 3500HOURS, CLEAN WORK READY, USALOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––SCAFFOLDS, STAGE SWINGS, CEMENTMIXERSCONTACT: GILROY ALBURYPHONE: 242-468-4488EMAIL: [email protected]––––––––––––––––––––––––––––––––SERVICE MANUAL FOR CAT 303C CRCONTACT: KEVIN SANSALONEPHONE: 856-297-4758EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED ALL 12 MONTHS BULLDOZER D3AT D10 FROM USER USA INSPECTIONBULLDOZERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––USED EXCAVATOR PART | SWINGMOTOR FOR A JOHN DEERE 690CEXCAVATOR IT IS A COMMERCIALINTERTECH #323-9210-011 JD PART #AT77614CONTACT: LOREN LINDLPHONE: 920.650.3870EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU D51EX22 TRACK DOZER | AIRCAB, 1000 +/- HOURS, USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE 580 LOADER BACKHOES |MODEL 580 K SK L SL M SMSCONTACT: FRANK, TRICO EQUIPMENTPHONE: 800-654-USED (8733) EXT. 1230FAX: 732-780-3618EMAIL: [email protected]––––––––––––––––––––––––––––––––MULCHER 250350 H/P | 2005-2007 BRONLH 250-400 MULCHERCONTACT: DARSENPHONE: 9174406319FAX: 9174406319EMAIL:[email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
Page 66 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cat Auction Services Holds Sale With Carter Machinery
(L-R): Mark Riley, People’s United Equipment Finance Corp.,Midlothian, Va., talks with Jon Carr, Carr Contracting & Equipment,Amelia, Va.; who was looking for a good deal and Jim Critzer, LincoInc., Waynesboro, Va., who was looking for Cat motorgraders andoff-road trucks.
Shopping for excavators to be used in theirtitanium mine in Dinwiddie, Va., are Markand Herbert Phillingane, H.A. Phillingane &Sons, Carson, Va.
Glenn Mitchell (L), Carter Machinery,talks with his customer Thomas Evelyn,of Evelyn Logging, Providence Forge, Va.,about a few of the dozers for sale.
Joel Mareell auctions offa Cat 994F wheel loaderthat was located off sitein Appalachia, Va.
Pictured are HarmanSaunders (L), J. HarmanSaunders ConstructionInc., South Boston, Va.and John Humphries,Carter Machinery.
Jerry Holleran (L), Machinery Services,Royersford, Pa.; and Rob Williams, InternationalConstruction Equipment, came to bid on a fewmachines and they hoped to buy if the price wasright.
Shown are Henry Meinhardt (L),Brandywine Truck & Equipment, andLarry Goff, Cat Auction Services.
(L-R): John Hood, Carolina CAT, Charlotte, N.C.; Billy Seals, ThompsonTractor Company, Birmingham, Ala.; and Wayne Calton, Gregory PooleEquipment Company, Raleigh, N.C.; talk sports before the auction begins.
Tom Jamieson (L), Cleveland Brothers, andJohn Alexander, Alban CAT, talk about theprojected machine values.
Cat Auction Services held a successfulauction with Carter Machinery atCarter’s Richmond, Va., location on
Oct.18. Bidders gathered to vie for a variety ofequipment and other items for the constructionand mining industries and to catch up withfriends and colleagues from around the area aswell as from out of state.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 67
Page 68 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchason Holds 3rd Auction of 2012Ritchason Auctioneers Inc. held its third auction of the
year at its company headquarters in Lebanon, Tenn.,on Sept. 22.
A terrific turnout of registered bidders and spectators wereon hand for bidding on hundreds of lots of machines, vehi-cles, trailers and miscellaneous items on a picture perfectSeptember day in central Tennessee. A total of 105 con-signors had machines in this sale.
Tim Cochran (L), Cochran Excavating, Bryson City,N.C., gains a bit more information on this LeeBoy 8515paver from consignor, Sam Sherrill of Sherrill Paving,Crossville, Tenn.
Regular auction attendees Robert Burton (L) andDavid Kwapinski, both of Kwapinski LandImprovement, Wartrace, Tenn., were looking over thedozers but were ultimately thinking about bidding on aCat 621 scraper.
(L-R): Brandon Ritchason recently rejoined theRitchason Auctioneers staff and was ready and wait-ing to get the sale under way with Daniel Pruitt, oper-ations manager, and Dewain Ritchason, president.
Gathering around and talking about some of themachines in the sale line up (L-R) are Mark Pryor,Pryor’s Custom Dozer & Backhoe Service, Gainesboro,Tenn.; Mark Brown, Browns Recycling, Gainesboro,Tenn.; and Charles Goolsby, WCG Equipment,Bloomington Springs, Tenn.
Test operating a Cat 320BL is Brad McKinney of BradMcKinney Construction Leitchfield, Ky.
Another great turnout of bidders for the Sept. 22Ritchason auction in Lebanon, Tenn.
Very interested in a low-hour 2009 Cat 930H wheelloader (L-R) are Rusty Rust, Reed Rust, of All StarConstruction & Development, Nashville, Tenn., andMike Hollingshead, Smyrna Ready Mix, Smyrna, Tenn.
Taking a good look at the dozers including this CatD5H XL are independent contractor, Philip Ballardand his wife Jeanetta, Utica, Ky.
Come to a Ritchason sale and you might be a star. (L-R): Brian McHugh, Brian McHugh Productions,Nashville, Tenn., does some video work with MikeJohnson, Resource Management Company, Hermitage,Tenn., and Ashley Nicholson, Ritchason Auctioneers’marketing director.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 69
Page 70 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Wed., November 7 @ 10AM
Rail & ConstructionEquipment
1798 Rhoadmiller StreetRICHMOND, VA 23220
Plus: (2) Electric Light Plants, Cincinnati Electric M003 Generator, Bush Cutter, (6) Tire Remover Wheels, Auto Anchor App, (5) Dual Anchor Spreaders, (8) Welders, (5) Air Compressors, (4) Ballast Cribbers, Spike Reclaimer, Spike Cart, (2) Tie Handlers, Large Rail Saw, Tie Sweeper, (8) Rail Anchor Carts,(5) Plate Brooms, Tie Crane, Rail Anchor Cart, Carrier Crane, Track Crane, (3) Spike Pullers, Tire Bore Dual, Auto-Lift Rail Lifter, Adzer, (3) Spike Drivers, (7) Spike Gaugers, (2) Lewis Bolts, (2) Anchor Spreaders, (3) CAT Tampers, (5) Anchor Tighteners, (6) Tie Handlers & Much More!
• Champion 715A Motor Grader• (6) Case 580 Super K Backhoe Loaders• (7) Case 580K/SK Backhoe Loaders• (6) John Deere 310D Backhoe Loaders• (3) John Deere 310E Backhoe Loaders• John Deere 444C Wheel Loader• Ford 4610APDA314D Tractor• (9) Trailers
Page 72 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Wednesday, Nov. 14th &Thursday, Nov. 15th • 9am
1042 Holland Ave • Philadelphia, MS 39350
Phone: 601.656.9768 Fax: 601.655.0192
Consignments are Now BeingAccepted for this Auction.
Deanco Auction Co of MS, Inc.Phone: 601.656.9768
Fax: 601.656.01921042 Holland Ave • PO Box 1248
Philadelphia, MS 39350
Auctioneers: Donnie W. Dean, MS Lic. 733 & Wes Dean, AL Lic. 5219, MSGL 835F
ONLINE BIDDINGWILL BE AVAILABLEFOR THIS AUCTION
www.deancoauction.comwww.deancoauction.com
HUGE 2-DAYPUBLIC
AUCTION
DEANCODEANCObid
AUCTIONAUCTIONLIVEonline
TYPES OF EQUIPMENT TO BE SOLD IN THIS AUCTION
A 10% buyers fee on the first $2500 ofeach lot and a 1% buyers fee on the
remaining balance of each lot
CRAWLER DOZERSCRAWLER LOADERS
HYDRAULIC EXCAVATORSCRANES
MOTOR GRADERSOFF ROAD END DUMPS
MOTOR SCRAPERSRUBBER-TIRED LOADERS
LOADER BACKHOESSKID STEER LOADERS
TRENCHERSFORKLIFTS
COMPACTION EQUIPMENTASPHALT EQUIPMENT
TRUCK TRACTORSDUMP TRUCKS
SPECIALTY TRUCKSALL TYPES OF TRAILERS
FARM TRACTORSFARMING ATTACHMENTS
LOGGING EQUIPMENT1-TONS TRUCKSPICKUPS & SUVS
AUTOMOBILESANTIQUE VEHICLES
MOTORCYCLESMISCELLANEOUS ITEMS
Check our website foran updated listing of
equipment and trucks to beoffered in this auction.
www.deancoauction.com
(2) 2008 Cat D6K XL
(1 of 2) 2009Mack CHU613
2006 MackCHN613
2008 Cat 324DL
Stephen E. Sandherr, the association’s chiefexecutive officer. “It appears that for everyrebounding market segment, there is anotherone that is shrinking.”
Construction firms employed 5.523 mil-lion people in September, up from 5.518 inAugust, Sandherr noted. Despite the month-ly gains, however, the sector’s overallemployment in September was 5,000 lowerthan one year earlier. The construction indus-try employs 2.2 million fewer people than itdid six years ago when the sector’s employ-ment peaked at 7.7 million workers.
Both residential and nonresidential con-struction added jobs in September, even asresidential construction outpaced nonresi-dential for the year. Residential building con-tractors added 1,100 jobs in September andhave gained 3,200 for the year. Meanwhile,residential specialty trade contractors added2,300 jobs in September and 19,700 for theyear.
Nonresidential building contractors added1,100 jobs in September, but have lost12,400 during the past 12 months.
Nonresidential specialty trade contractorsadded 1,500 jobs for the month, but lost30,000 for the year. And the heavy and civilengineering construction sector lost 200 jobsin September, but has added 14,600 sinceSeptember 2011.
Sandherr cautioned that over two millionformer construction workers have left theindustry, either to retire or for other jobs infaster-growing sectors. He said that as aresult, the industry will have a hard timefinding skilled workers once constructiondemand rebounds. The association officialadded that federal tax and spending uncer-tainties were making it hard for firms toencourage people to consider careers in con-struction.
“Becoming a skilled construction workerrequires months of training and practice,”Sandherr said. “It is hard to get new workersto start months of training for jobs that maynot be there next year if firms are payingmore in taxes and earning less on publicprojects.”
Sector’s Overall EmploymentRate Remains Lower Than 2011
EMPLOYMENT from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 31, 2012 • Page 73
Page 74 • October 31, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.