SOLIDWORKS Flow Simulation Focused, Proven, Credible. Steady-state Fluid Flow Internal & External Fluid Flow Time-dependent Fluid Flows Combustible Mixtures Mixed Flows Subsonic, Transonic and Supersonic Flow Free, Forced and Mixed Convection Laminar and Turbulent Fluid Flows Porous Media Fluid Flows in the Models with Moving and Rotating Surfaces Heat Conduction in Fluid, Solid and Porous Media with/without Conjugate Heat Transfer and/or Contact Heat Resistance between Solids Compressible Gas and Incompressible Fluids Real Gases Heat Conduction in Solids Only Joule Heating due to Direct Electric Current in Electrically Conducting Solids Heat Sources due to Peltier Effect Gravitational Effects Separated Flows – Fluid Sub-domains Fully Embedded in SOLIDWORKS 3D CAD Ease of Use/Intuitiveness/Concurrent Engineering Local and Worldwide Support Services Support SOLIDWORKS Configurations FLOW SIMULATION HVAC (ADD-ON) ELECTRONIC COOLING (ADD-ON) Sector Periodicity 2D/3D Flow Radiation Heat Transfer Between Solids Flow Conditions
2
Embed
SOLIDWORKS Flow Simulation 2019 - SEACAD · SOLIDWORKS Flow Simulation intuitive CFD (computational ˛uid dynamics) tool enables designers to simulate ˛uid ˛ow such as liquid and
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SOLIDWORKS Flow Simulation
Focused, Proven, Credible.
Steady-state Fluid Flow
Internal & External Fluid Flow
Time-dependent Fluid Flows
Combustible Mixtures
Mixed Flows
Subsonic, Transonic and Supersonic Flow
Free, Forced and Mixed Convection
Laminar and Turbulent Fluid Flows
Porous Media
Fluid Flows in the Models with Moving and Rotating Surfaces
Heat Conduction in Fluid, Solid and Porous Media with/without Conjugate Heat Transfer and/or Contact Heat Resistance between Solids
Compressible Gas and Incompressible Fluids
Real Gases
Heat Conduction in Solids Only
Joule Heating due to Direct Electric Current in Electrically Conducting Solids
Heat Sources due to Peltier E�ect
Gravitational E�ects
Separated Flows – Fluid Sub-domains
Fully Embedded in SOLIDWORKS 3D CAD
Ease of Use/Intuitiveness/Concurrent Engineering
Local and Worldwide Support Services
Support SOLIDWORKS Con�gurations
FLOWSIMULATION
HVAC(ADD-ON)
ELECTRONIC COOLING(ADD-ON)
Sector Periodicity
2D/3D Flow
Radiation Heat Transfer Between Solids
Flow Conditions
Evaluate gas movement and temperature in working and living environments, as well as lighting applications, concurrent with design using the HVAC applications module. Calculate 8 human comfort parameters including “Predicted Mean Vote” (PMV) and “Predicted Percent Dissatis�ed” (PPD) to measure thermal comfort and identify potential problem areas. Advanced radiation – model absorption of radiation in solid bodies and de�nition of the radiation spectrum for a more accurate radiation simulation. Tracer study – analyze the �ow of a certain admixture (tracer) in the existing carrier �uid.
Comfort Parameters Simulation
SOLIDWORKS Flow Simulation intuitive CFD (computational �uid dynamics) tool enables designers to simulate �uid �ow such as liquid and gas �ow in real world conditions, run “what-if” scenarios, and e�ciently analyze the e�ects of �uid �ow, heat transfer, and related forces on immersed or surrounding components.
Allows simulate �ows with a freely moving interface between two immiscible �uids. The volume of �uid method (VOF) is used for tracking and locating the free-surface or �uid-�uid interface. The following pairs of �uids are available: gas-liquid, liquid-liquid, gas-non-newtonian liquid. Any phase change transition, rotation, porous media and fans are not allowed.Fast Fourier Transformation (FFT) algorithm converts a time signal to the complex frequency domain for transient analysis. The new FFT plot allows time-dependent
Equilibrium Volume Condensation of Water from Steam and its In�uence onFluid Flow and Heat Transfer
Tracer Study
Comfort Parameters
Heat Pipes/Thermal joints/Two-resistor Components
Printed Circuit Boards
Thermo - Electric Coolers
Noise Prediction(Steady State and Transient)
Free Surface
Optimize and better the cooling strategy for electronic components concurrent to the design process and its ability to accurately simulate and analyze the special electronic components such as the Two Resistor Components, Heat Pipes and Thermo Electric Coolers.