SOILMEC JAPAN CO LTD SOILMEC FAR EAST PTE.LTD SOILMEC ...eastafricanpiling.weebly.com/uploads/3/0/6/1/30610915/soilmec_r620.pdf · R-620HYDRAULIC ROTARY RIG Ground Engineering Equipment

R-620HYDRAULIC ROTARY RIG

G r o u n d E n g i n e e r i n g E q u i p m e n t

In 1990 Soilmec was awarded with the certification of its

Quality System Complying with ISO 9001:2000/UNI 29001

standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

G r o u n d E n g i n e e r i n g E q u i p m e n t

07/2

004-

1500

-D/F

-Cils

-Il D

igita

le

2049

8

1650

045

70

- 30

00 -

600

011

39

1000

3900 ( 3400 )

1893

1028

7387

144013

000

2121

0

5620

9860

2105

235

2250

1275

0

446

900

3800

PULL-DOWNHIGH POSITION

PULL-DOWNLOW POSITION

1450

0

2121

0

1100

1275

0

5600

1060

4000 ( 3400 )

3856

5456

1600

446

2250

1961

8594

5000

240

165

1440

446

2121

0

1002

5

5600

1100

4000 ( 3400 )

1275

022

5019

61

A new model

R-620LARGE DIAMETER PILES

Transport Condition - Standard Version

CROWD SYSTEM BY WINCH / CFA

Working ConditionStandard version

Working ConditionStd. with Casing Oscillator Crowd System by Winch

The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.

1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.

2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.

3 Winch assembly.

4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.

5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.

6 Sheave cathead.

7 Crowd system by 5,6 m. hydraulic cylinder.

8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.

9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.

10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).

4

7

9

8

1

6

10

Transport Condition - CFA

5

R-620 R-620

The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:

- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.

The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees

slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).

CFA version

4450

750

2990

3000

137614181

12750

3050 5900

700

3324

4024

552250

2

3

980

14181

12750

2250

551376

3320

.5

4220

.5

379

4170 5264

15500

837

900

440035

00

1310

H = Kelly stub height from ground level * Height limited by rotary position

HYDRAULIC DRILLING RIG

The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.

Large diameter bored pile

Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1

Max powerCrowd system by cylinder with 2 mounting positions

Pull down strokeCable crowd system (13 m stroke)Operating weight

mmmmm

kNmrpmrpmkNkN

typekW (BHP)

kNmmkNton

18001500662013414419280

CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150

5600200 / 200

63

mmmkN

kNmrpmton

900 / 100022,560020134

60 - 63

Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight

Continuous Flight Auger (CFA)

Mechanical locking kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

5,25,66,47,27,7

8,1*7,96,24,43,5

9,010,012,013,514,5

32,035,042,049,053,0

4x4x4x4x4x

Friction kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

4,05,76,37,14,95,56,46,97,17,4

8,1*7,66,44,4

8,1*7,65,94,54,23,6

9,010,511,513,59,0

10,512,013,514,014,5

32,037,041,550,039,546,055,062,063,566,0

4x4x4x4x5x5x5x5x5x5x

2049

8

1650

045

70

- 30

00 -

600

011

39

1000

3900 ( 3400 )

1893

1028

7387

144013

000

2121

0

5620

9860

2105

235

2250

1275

0

446

900

3800

PULL-DOWNHIGH POSITION

PULL-DOWNLOW POSITION

1450

0

2121

0

1100

1275

0

5600

1060

4000 ( 3400 )

3856

5456

1600

446

2250

1961

8594

5000

240

165

1440

446

2121

0

1002

5

5600

1100

4000 ( 3400 )

1275

022

5019

61

A new model

R-620LARGE DIAMETER PILES

Transport Condition - Standard Version

CROWD SYSTEM BY WINCH / CFA

Working ConditionStandard version

Working ConditionStd. with Casing Oscillator Crowd System by Winch

The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.

1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.

2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.

3 Winch assembly.

4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.

5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.

6 Sheave cathead.

7 Crowd system by 5,6 m. hydraulic cylinder.

8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.

9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.

10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).

4

7

9

8

1

6

10

Transport Condition - CFA

5

R-620 R-620

The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:

- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.

The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees

slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).

CFA version

4450

750

2990

3000

137614181

12750

3050 5900

700

3324

4024

552250

2

3

980

14181

12750

2250

551376

3320

.5

4220

.5

379

4170 5264

15500

837

900

440035

00

1310

H = Kelly stub height from ground level * Height limited by rotary position

HYDRAULIC DRILLING RIG

The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.

Large diameter bored pile

Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1

Max powerCrowd system by cylinder with 2 mounting positions

Pull down strokeCable crowd system (13 m stroke)Operating weight

mmmmm

kNmrpmrpmkNkN

typekW (BHP)

kNmmkNton

18001500662013414419280

CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150

5600200 / 200

63

mmmkN

kNmrpmton

900 / 100022,560020134

60 - 63

Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight

Continuous Flight Auger (CFA)

Mechanical locking kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

5,25,66,47,27,7

8,1*7,96,24,43,5

9,010,012,013,514,5

32,035,042,049,053,0

4x4x4x4x4x

Friction kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

4,05,76,37,14,95,56,46,97,17,4

8,1*7,66,44,4

8,1*7,65,94,54,23,6

9,010,511,513,59,0

10,512,013,514,014,5

32,037,041,550,039,546,055,062,063,566,0

4x4x4x4x5x5x5x5x5x5x

2049

8

1650

045

70

- 30

00 -

600

011

39

1000

3900 ( 3400 )

1893

1028

7387

144013

000

2121

0

5620

9860

2105

235

2250

1275

0

446

900

3800

PULL-DOWNHIGH POSITION

PULL-DOWNLOW POSITION

1450

0

2121

0

1100

1275

0

5600

1060

4000 ( 3400 )

3856

5456

1600

446

2250

1961

8594

5000

240

165

1440

446

2121

0

1002

5

5600

1100

4000 ( 3400 )

1275

022

5019

61

A new model

R-620LARGE DIAMETER PILES

Transport Condition - Standard Version

CROWD SYSTEM BY WINCH / CFA

Working ConditionStandard version

Working ConditionStd. with Casing Oscillator Crowd System by Winch

The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.

1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.

2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.

3 Winch assembly.

4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.

5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.

6 Sheave cathead.

7 Crowd system by 5,6 m. hydraulic cylinder.

8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.

9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.

10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).

4

7

9

8

1

6

10

Transport Condition - CFA

5

R-620 R-620

The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:

- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.

The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees

slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).

CFA version

4450

750

2990

3000

137614181

12750

3050 5900

700

3324

4024

552250

2

3

980

14181

12750

2250

551376

3320

.5

4220

.5

379

4170 5264

15500

837

900

440035

00

1310

H = Kelly stub height from ground level * Height limited by rotary position

HYDRAULIC DRILLING RIG

The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.

Large diameter bored pile

Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1

Max powerCrowd system by cylinder with 2 mounting positions

Pull down strokeCable crowd system (13 m stroke)Operating weight

mmmmm

kNmrpmrpmkNkN

typekW (BHP)

kNmmkNton

18001500662013414419280

CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150

5600200 / 200

63

mmmkN

kNmrpmton

900 / 100022,560020134

60 - 63

Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight

Continuous Flight Auger (CFA)

Mechanical locking kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

5,25,66,47,27,7

8,1*7,96,24,43,5

9,010,012,013,514,5

32,035,042,049,053,0

4x4x4x4x4x

Friction kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

4,05,76,37,14,95,56,46,97,17,4

8,1*7,66,44,4

8,1*7,65,94,54,23,6

9,010,511,513,59,0

10,512,013,514,014,5

32,037,041,550,039,546,055,062,063,566,0

4x4x4x4x5x5x5x5x5x5x

2049

8

1650

045

70

- 30

00 -

600

011

39

1000

3900 ( 3400 )

1893

1028

7387

144013

000

2121

0

5620

9860

2105

235

2250

1275

0

446

900

3800

PULL-DOWNHIGH POSITION

PULL-DOWNLOW POSITION

1450

0

2121

0

1100

1275

0

5600

1060

4000 ( 3400 )

3856

5456

1600

446

2250

1961

8594

5000

240

165

1440

446

2121

0

1002

5

5600

1100

4000 ( 3400 )

1275

022

5019

61

A new model

R-620LARGE DIAMETER PILES

Transport Condition - Standard Version

CROWD SYSTEM BY WINCH / CFA

Working ConditionStandard version

Working ConditionStd. with Casing Oscillator Crowd System by Winch

The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.

1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.

2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.

3 Winch assembly.

4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.

5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.

6 Sheave cathead.

7 Crowd system by 5,6 m. hydraulic cylinder.

8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.

9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.

10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).

4

7

9

8

1

6

10

Transport Condition - CFA

5

R-620 R-620

The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:

- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.

The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees

slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).

CFA version

4450

750

2990

3000

137614181

12750

3050 5900

700

3324

4024

552250

2

3

980

14181

12750

2250

551376

3320

.5

4220

.5

379

4170 5264

15500

837

900

440035

00

1310

H = Kelly stub height from ground level * Height limited by rotary position

HYDRAULIC DRILLING RIG

The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.

Large diameter bored pile

Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1

Max powerCrowd system by cylinder with 2 mounting positions

Pull down strokeCable crowd system (13 m stroke)Operating weight

mmmmm

kNmrpmrpmkNkN

typekW (BHP)

kNmmkNton

18001500662013414419280

CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150

5600200 / 200

63

mmmkN

kNmrpmton

900 / 100022,560020134

60 - 63

Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight

Continuous Flight Auger (CFA)

Mechanical locking kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

5,25,66,47,27,7

8,1*7,96,24,43,5

9,010,012,013,514,5

32,035,042,049,053,0

4x4x4x4x4x

Friction kelly bar – Ø 406 mmelements

n°length

mdepth

mweight

tonH height

m

4,05,76,37,14,95,56,46,97,17,4

8,1*7,66,44,4

8,1*7,65,94,54,23,6

9,010,511,513,59,0

10,512,013,514,014,5

32,037,041,550,039,546,055,062,063,566,0

4x4x4x4x5x5x5x5x5x5x

R-620HYDRAULIC ROTARY RIG

G r o u n d E n g i n e e r i n g E q u i p m e n t

In 1990 Soilmec was awarded with the certification of its

Quality System Complying with ISO 9001:2000/UNI 29001

standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

G r o u n d E n g i n e e r i n g E q u i p m e n t

07/2

004-

1500

-D/F

-Cils

-Il D

igita

le

R-620HYDRAULIC ROTARY RIG

G r o u n d E n g i n e e r i n g E q u i p m e n t

In 1990 Soilmec was awarded with the certification of its

Quality System Complying with ISO 9001:2000/UNI 29001

standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

G r o u n d E n g i n e e r i n g E q u i p m e n t

07/2

004-

1500

-D/F

-Cils

-Il D

igita

le

R-620HYDRAULIC ROTARY RIG

G r o u n d E n g i n e e r i n g E q u i p m e n t

In 1990 Soilmec was awarded with the certification of its

Quality System Complying with ISO 9001:2000/UNI 29001

standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]

G r o u n d E n g i n e e r i n g E q u i p m e n t

07/2

004-

1500

-D/F

-Cils

-Il D

igita

le