Slotted Duct Vertical Cable Management and Standard Rackassets.twacomm.com/assets/pdf/17188.pdfSlotted Duct Vertical Cable Management and Standard Rack 2. RACK INSTALLATION 2.1 ASSEMBLE
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
See the diagram below for dimensions needed to locate the rackand the vertical cable management.
2.2 MOUNT RACK TO FLOOR2.2.1 Securely mount the rack to the floor using the appropriate
hardware based on the floor construction (concrete, raisedfloor, or wood).
LOCATION GUIDEDimensions in () parenthesis are for 6” Vertical Cable Management
Dimensions in [] brackets are for 3” Vertical Cable Management
* Mounts to front of rack
Sold by:
http://www.TWAcomm.comToll Free: (877) 892-2666
INSTALLATION INSTRUCTIONS
FOR TECHNICAL SUPPORT CALL: 866-405-6654
��������� ����
�������������
�����
������
����
���� ������ ��� ���
���������������
Page 2 of 3
CM10B
CMVDRC
CM VDR2S
CMVDR2
CMVDR1
3.1 ATTACH CENTER MOUNTED VERTICAL CABLE MANAGEMENT PANEL
3.1.1 Mount the racks to the floor (with theappropriate space indicated in the chart below)using #12 - 24 x 1/2” screws (supplied with the
vertical panels) tofasten the verticalmanagement betweenthe racks. Panelsfasten to the back ofthe vertical channeluprights.
3. VERTICAL CABLE MANAGEMENT INSTALLATION
3.2 ATTACH SIDE MOUNTED VERTICAL CABLE MANAGEMENT PANEL
3.2.1 Use #12 - 24 x 1/2” screws (supplied withthe vertical panels) to fasten the verticalmanagement between the racks. Panelsfasten to the back of the vertical channeluprights. (Except part numbersWMPVFMHC45 and WMPVFM45)
3.3 OPTION 2: USING THE CABLE MANAGEMENT BRACKETS
3.3.1 Mount the racks to the floor with 8.25”between the mounting holes.
3.3.2 Use two (4) #12 - 24 x 1/2” screws to fastenthe CMVDRC brackets between the racks.
3.3.3 Use two (2) 12-24 x 1/2” screws to fasten theCMVDR1,CMVDR2, or CMVDR2S bracketsto the sides of the racks on either the front orthe back.
FRONTBACK
FRONT
BACK
FRONT
BACK
Distance BetweenRack Mounting Holes
#12 - 24 X 1/2” Screws
#12 - 24 X 1/2” Screws
8.25” Between RackMounting Holes
#12 - 24 X 1/2” Screws
Center Bracket Assembly
WMPVCB
For use with 4” x 5”, 6” x 6”and 6” x 8” vertical panels