Single Stage Vane Separator The Seaworth Single Stage Separator system is designed to eliminate moisture ingress where space restrictions indicate the need for high velocity and large water volumes are evident. Construction: The Seaworth Vane Separator units are constructed in aluminium with anodised vanes and powder coated casing. The units are robustly constructed and are suitable for a harsh marine environment. The Seaworth Separator unit will operate up to 6.1m/sec with a normal design velocity of 5.0m/sec. Seaworth Single Stage Separators are included on Z-Tech Tug “FARFAN”: Photo courtesy of Cheoy Lee Shipyard Ltd
2
Embed
Single Stage Vane Separator - Seaworth Marine Sheet 1 Stage.pdf · Single Stage Vane Separator The Seaworth Single Stage Separator system is designed to eliminate moisture ingress
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Single Stage Vane Separator
The Seaworth Single Stage Separator system is designed to eliminate moisture ingress where space restrictions indicate the need for high velocity and large water volumes are evident.
Construction:
The Seaworth Vane Separator units are constructed in aluminium with anodised vanes and powder coated casing. The units are robustly constructed and are suitable for a harsh marine environment. The Seaworth Separator unit will operate up to 6.1m/sec with a normal design velocity of 5.0m/sec.
Seaworth Single Stage Separators are included on Z-Tech Tug “FARFAN”: Photo courtesy of Cheoy Lee Shipyard Ltd
Vane Separator:
The Single Stage separator achieves maximum possible water loading with minimal weight and pressure losses. Air drawn through a series of specially designed vanes which trap water, which then drains verti-cally down to the drainage channel and finally out the front drain slot or into a Manometric drain trap.
Front and Rear flange options are available depending on project requirements. Contact Camfil NZ for details on options available.
Mounting: Seaworth Separator units are supplied with predrilled flange, 316 st/st countersunk screws, nylon insulators and neoprene flange gasket.
Sizing Information Height Width Vessels Opening H W Over Flanges H + 60mm W + 60mm
Open Face Size H - 130mm W - 60mm
Overall Depth: 75mm
This data is guideline only and is subject to change. For further information please contact Camfil New Zealand Ltd