06 GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The junction boxes are destined for electrical instalations and telecommunications. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. Have 4 or 6 cylinders for fixing the lids with plastic claw or screws. Have different tickets for tubes, no tools required for its drilling. You can link between them and with other junction boxes always that match one of the two measures, using pieces of link. Our system of different packaging for boxes and covers, allow the option of buying boxes or lids separately, as required. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.90 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. The blind lids allow to keep the box free of dirt in the course of the work. The plastic filaments acts as witnesses and allows you to retrieve the blind lid for a new facility. Made of termoplastic material PP halogen free. SEQUENCE OF ASSEMBLING FOR BOX REF. 23321 WITH ITS LID REF. 23301 The assembling it´s the same for all references in this serie SEQUENCE OF ASSEMBLING FOR BOX REF. 23329 WITH ITS PIECES FOR LINK The assembling it´s the same for all references in this serie FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall. Junction boxes for flush mounted with closing of patented plastic claw or screws
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
06
GENERAL INFORMATION AND INSTRUCTIONS FOR USE : The junction boxes are destined for electrical instalations and telecommunications. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. Have 4 or 6 cylinders for fixing the lids with plastic claw or screws. Have different tickets for tubes, no tools required for its drilling. You can link between them and with other junction boxes always that match one of the two measures, using pieces of link. Our system of different packaging for boxes and covers, allow the option of buying boxes or lids separately, as required. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,5 00 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.90 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. The blind lids allow to keep the box free of dirt in the course of the work. The plastic filaments acts as witnesses and allows you to retrieve the blind lid for a new facility. Made of termoplastic material PP halogen free.
SEQUENCE OF ASSEMBLING FOR BOX REF. 23321 WITH ITS LID REF. 23301
The assembling it´s the same for all references in this serie
SEQUENCE OF ASSEMBLING FOR BOX REF. 23329 WITH ITS PIECES FOR LINK The assembling it´s the same for all references
in this serie
FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall.
Junction boxes for flush mounted with closing of patented plastic claw or screws
REF. 23319 REF. 23316 REF. 23334
Measures mm: 64 x 64 x 44 Pieces/packing: 30 Unit Price: 0,4260 €
Measures mm: 77 x 77 Pieces/packing: 30 Unit Price: 0,4450 €
Measures mm: 2,8 x 25 Pieces/packing: 40 Unit Price: 0,0136 €
SPECIAL BOX FOR POINT OF LIGHT LID FOR BOX REF. 23001 - 23319 SCREWS FOR JUNCTION BOXES
REF. 23320 REF. 23300 REF. 23251
Measures mm: 100 x 60 x 45 Pieces/packing: 60 Unit Price: 0,4840 €
Measures mm: 113 x 72 Pieces/packing: 60 Unit Price: 0,5050 €
Measures mm: 100 x 60 Pieces/packing: 20/200 Unit Price: 0,4840 €
JUNCTION BOX 100 X 60 X 45 mm LID FOR BOX REF. 23320 BLIND LID FOR BOX REF. 23320
REF. 23321 REF. 23301 REF. 23252
Measures mm: 100 x 100 x 50 Pieces/packing: 60 Unit Price: 0,5500 €
Measures mm: 113 x 113 Pieces/packing: 60 Unit Price: 0,5660 €
Measures mm: 100 x 100 Pieces/packing: 20/200 Unit Price: 0,5500 €
JUNCTION BOX 100 X 100 X 50 mm
LID FOR BOX REF. 23321
BLIND LID FOR BOX REF. 23321
07
Junction boxes for flush mounted with closing of patented plastic claw or screws
REF. 23322 REF. 23302 REF. 23253
Measures mm: 150 x 100 x 50 Pieces/packing: 60 Unit Price: 0,9920 €
Measures mm: 164 x 113 Pieces/packing: 60 Unit Price: 1,0220 €
Measures mm: 150 x 100 Pieces/packing: 20/200 Unit Price: 0,9920 €
JUNCTION BOX 150 X 100 X 50 mm
LID FOR BOX REF. 23322
BLIND LID FOR BOX REF. 23322
REF. 23323 REF. 23303
Measures mm: 245 x 175 x 60 Pieces/packing: 20 Unit Price: 2,1000 €
Measures mm: 265 x 195 Pieces/packing: 20 Unit Price: 2,1430 €
JUNCTION BOX 245 X 175 X 60 mm
LID FOR BOX REF. 23323
REF. 23324 REF. 23220 REF. 23031
Measures mm: 450 x 215 x 65 Pieces/packing: 6 Unit Price: 6,0500 €
Measures mm: 249 x 483 x 5 Pieces/packing: 6 Unit Price: 5,2000 €
Pieces/packing: 100 Unit Price: 0,4230 €
DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23219-23324
08
Junction boxes for flush mounted with closing of patented plastic claw or screws
LID FOR BOX REF.23219-23324 -23139
JUNCTION BOX 450X215X65 mm
REF. 23325 REF. 23305 REF. 23254
Measures mm: 150 x 150 x 50 Pieces/packing: 40 Unit Price: 1,2470 €
Measures mm: 163 x 163 Pieces/packing: 40 Unit Price: 1,2810 €
Measures mm: 150 x 150 Pieces/packing: 70 Unit Price: 1,2470 €
LID FOR BOX REF. 23325
REF. 23326 REF. 23306 REF. 23255
Measures mm: 205 x 105 x 50 Pieces/packing: 40 Unit Price: 1,2947 €
Measures mm: 222 x 120 Pieces/packing: 40 Unit Price: 1,3300 €
Measures mm: 205 x 105 Pieces/packing: 100 Unit Price: 1,2947 €
JUNCTION BOX 205 X 105 X 50 mm LID FOR BOX REF. 23326 BLIND LID FOR BOX REF. 23326
REF. 23327 REF. 23318 REF. 23035
Measures mm: 300 x 200 x 60 Pieces/packing: 10 Unit Price: 4,3080 €
Measures mm: 320 x 220 Pieces/packing: 10 Unit Price: 4,4100 €
Unit Price: 0,3750 €
BOX FOR THE NETWORK TERMINATION 300 X 200 X 60 mm
DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23327
09
Junction boxes for flush mounted with closing of patented plastic claw or screws
LID FOR BOX REF. 23327
JUNCTION BOX 150X150X50 mm BLIND LID FOR BOX REF. 23325
REF. 23329 REF. 23298 REF. 23256
Measures mm: 200 x 130 x 60 Pieces/packing: 30 Unit Price: 1,4520 €
Measures mm: 219 x 150 Pieces/packing: 30 Unit Price: 1,4900 €
Measures mm: 200 x 130 Pieces/packing: 40 Unit Price: 1,4520 €
JUNCTION BOX 200 X 130 X 60 mm
LID FOR BOX REF. 23329
BLIND LID FOR BOX REF. 23329
REF. 23330 REF. 23297 REF. 23036
Measures mm: 300 x 100 x 60 Pieces/packing: 20 Unit Price: 2,4330 €
Measures mm: 320 x 120 Pieces/packing: 20 Unit Price: 2,4880 €
Unit Price: 0,2650 €
BOX FOR THE NETWORK TERMINATION 300 X 100 X 60 mm
DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23330
10
REF. 23328 REF. 23299
Measures mm: 170 x 100 x 40 Pieces/packing: 10 Unit Price: 0,9920 €
Measures mm: 190 x 120 Pieces/packing: 10 Unit Price: 1,0340 €
BOX FOR THE NETWORK TERMINATION 170 X 100 X 40 mm
Junction boxes for flush mounted with closing of patented plastic claw or screws
LID FOR BOX REF. 23328
LID FOR BOX REF. 23330
REF. 23333 REF. 23296 REF. 23037
Measures mm: 480 x 130 x 60 Pieces/packing: 6 Unit Price: 5,1540 €
Measures mm: 149 x 498 Pieces/packing: 6 Unit Price: 5,2600 €
Unit Price: 0,4230 €
DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23333
REF. 23332 REF. 23312
Measures diameter: 105 X 45 Pieces/packing: 60 Unit Price: 0,4700 €
Measures diameter: 120 Pieces/packing: 60 Unit Price: 0,4790 €
ROUND JUNCTION BOX 105 X 45mm
LID FOR BOX REF. 23332
REF. 23331 REF. 23311
Measures diameter: 80 X 40 Pieces/packing: 60 Unit Price: 0,2970 €
Measures diameter: 95 Pieces/packing: 60 Unit Price: 0,3070 €
ROUND JUNCTION BOX 80 X 40 mm
LID FOR BOX REF. 23331
11
Junction boxes for flush mounted with closing of patented plastic claw or screws