This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1. Attachable Ladder (Min. length: 11-1/2”, Max. Spacing: 16-3/4”) (e2v, vi) a) Position so as not to tip the scaffold. b) 1st rung 24” max. above supporting level. (e2ii) c) Rest platform, 35’ max. interval (e2iii) d) Specifically designed for the scaffold used. (e2iv)
2. Intergral prefabricated scaffold access frames (e6) a) Specifically designed and constructed for use as ladder rungs. (e6i) b) Rung length: 8” Min. (e6ii) c) Uniformly spaced within frame, 16-3/4” max. (e6iv, e6vi) d) Rest platform, 35’ max. interval. (e6v) e) Steps and rungs shall line up vertically between rest platforms. (e7)
ROLLING TOWER SCAFFOLD COMPONENTS
1) GUARD RAIL SYSTEM: Top-rail: 36”-42”, Mid-rail: 18”-21”2) ACCESS LADDER: Proper access ladder is required to extend 3’ above platform.3) TOE BOARD: Minimum 3/5” above working deck.4) PLANKING: Working levels must be fully decked to guard rails w/no greater than 1” gap between boards.5) HORIZONTAL/DIAGONAL GOOSER: Required at bottom, top (wehn not using hook plank), and at maximum 25’ intervals.6) CROSS BRACE: Typical sizes: 7’x4’ or 10’x4’7) COUPLING PIN AND GRAVITY LOCK: Frame legs must be lock from uplift using proper pins.8) OUTRIGGER: Used to widen the base of a free-standing tower to meet 4:1 Height-to-Base Ratio.9) TOGGLE PIN: Required to secure caster to frame.10) SCAFFOLD CASTER: Casters must be locked before personnel use scaffolding.
Notes: Riding of rolling scaffolding is prohibited. Always dismount before moving scaffold.Always watch for overhead hazards such as low beams
GET MAXIMUM FLEXIBILITY FROM A SMALL NUMBER OF ELEMENTS
SIMPLE, SAFE & STRONG SCAFFOLDING SOLUTIONUNLIMITED CONFIGURATIONS FROM A MINIMUM NUMBER
OF COMPONENTS
ROSETTE WITH 8-HOLE, ADJUSTABLE-ANGLE DESIGN
CONNECT UP TO 8 HORIZONTALS AND/OR VERTICALS CAN TO ROSETTE
SYSTEM SCAFFOLD STAIR TOWER
DRIVE IT HOME WITH ONE BLOW FROM THE HAMMER FOR A RIGID, SECURE
JOINT
DROP WEDGE THROUGH ROSETTE TO QUICKLY CREATE A TIGHT CONNECTION
PUSH IT ONTO THE ROSETTE AND FLIP THE WEDGE UP
ALIGN THE HORIZONTAL LEDGER WITH THE ROSETTE
QUICK AND EASY INSTALLATION....Item# Description Weight
7010303 System Standard - 3'-3" (Yellow) 12.1 lbs.7010606 System Standard - 6'-6" (Orange) 25 lbs.7010909 System Standard - 9'-9" (Red) 36.5 lbs.7020300 System Horizontal - 3'-0" (Yellow) 9.5 lbs.7020400 System Horizontal - 4'-0" (White) 11.9 lbs.7020500 System Horizontal - 5'-0" (Red) 14.3 lbs.7020700 System Horizontal - 7'-0" (Yellow) 19.1 lbs.70207T0 System Horizontal / Truss 7'-0" 30.12 lbs.7021000 System Horizontal - 10'-0" (Red) 26.2 lbs.70210T0 System Horizontal / Truss 10'-0" 56 lbs.7030300 System Bay Brace 3'-0" (Yellow) 14.4 lbs.7030400 System Bay Brace 4'-0" (White) 16.4 lbs.7030500 System Bay Brace 5'-0" 18.4 lbs.7030700 System Bay Brace 7'-0" (Yellow) 22.4 lbs.7031000 System Bay Brace 10'-0" (Red) 28.4 lbs.7050100 System Starter Collar 4.5 lbs.7050200 System Base Jack-Hollow 1 1/2" 38mm 7 lbs.7050300 System Base Jack-Swivel 8.5 lbs.7050400 System Caster, 10" 18 lbs.7060100 System Stair Stringer-Left 49 lbs.7060200 System Stair Stringer-Right 49 lbs.7060400 System Stair Tread 3' For 4' Bay 8.5 lbs.7070200 System 2 Board Bracket 14 lbs.7070300 System 3 Board Bracket 20 lbs.
WARNINGFAILURE TO COMPLY WITH ALLOWABLE OUTREACHESAND REQUIRED COUNTERWEIGHTS CAN RESULT INDEATH OR SERIOUS INJURY. CABLE STRONGBACK/TRUSS ASSEMBLY IS REQUIRED FOR ADDITIONALOUTREACH AS SHOWN. (GREATER THAN 4' W/ 1000#RATED HOIST) TIEBACK TO STRUCTURALLY SOUNDPORTION OF BUILDING IS REQUIRED AT ALL TIMES.
Atlas Sales has the equipment you need to provide a safe and secure working environment at any height.
Full body harnesses are lightweight, fit confortably on the worker, and features a D-ring on the back which serves as a secure anchorage point for the lanyard.
Lanyards are generally 6 feet in length and secure the worker to the rope grab on the lifeline. Shock absorbing designs minimize the impact to the user in the event of a fall.
Rope grabs are designed to move easily up and down the lifeline with the worker, maintaining a proper fall height.
Finally, anchors provide a secure attachment point for the lifeline safety rope.
Item# DescriptionA730 Tractel Basic Harness (Polyester)XVEST02 Tracvest Harness Vest/OrangeC026E 6 Ft High Abrasion Web, 2 Arms With 3/4"
And Two 2-1/4" Die-Cut Snap HooksC1106H 6 Ft Lightweight Web With 3/4" And 2-3/8"
Die-Cut Snap HooksC1526GH Multi-Function Lanyard With 3/4" And 2-3/8"
Gate Opening Aluminum CarabinerC006G 6 Ft Shock-Absorbing Lanyard With 3/4" And
2-1/4" Dl Snap HookC406G Rope Lanyard 6 Ft X 5/8" With 3/4" And 1-
1/2" Self-Locking Snap HooksRN8QG 8 Ft Self-Retracting Web Lanyard With
Autolocking Carabiner And 3/4" Self-Locking ROGR58 Rope Grab For 5/8" Three-Strand RopeROGR34 Rope Grab For 3/4" And 5/8" RopeV4165 6 Ft Anchor Sling Rated At 5000 LbsRSAD58 5/8" Safety Rope Anchor DeviceROPO58 5/8" Polydac Rope
Post Shores are designed to support vertical loads and must be restrained from lateral movement with bracing or by other means.
There are many variables which can affect the perfomance of this product. Contact Atlas Sales for your specific application. The information on this page is for general informational pur-poses only. Erection, use, maintenance and disassembly must con-form to Scaffolding, Shoring & Forming Institute (SSFI) guide-lines as well as all federal, state and local regulations. For copies of SSFI guidelines and information on regulations, contact Atlas Sales.
*
Collar with quick-release load pin(Strike pin with hammer to reduce load tension)
P O S T S H O R E S
S L A B G U A R D R A I L P O S T
ATLAS SHORING ACCESSORIES PRO-SHORE MODULAR DECK SYSTEM Post Shores & Slab Guardrails Panels, Joints & Application
SCAFFOLDING FORMING SCAFFOLDING FORMING
1�
SCAFFOLDING FORMING SCAFFOLDING FORMING
Typical Pro-Deck application: (1) Top floor - “Live” floor(2) Mid floor - Recently poured deck(3) Bottom floor - Stripped and
Pro-Deck panels stack evenly for storage or transport
Supports up to 18” slabs with standard equipment.
Flexible - can accomodate high bay form requirements.
Lower Material Costs - 70% Material recovery 1 day after pouring possible.
Lower Freight Costs - Stackable for easy storage & transport.
Easy to use - lightweight components and color-coded to match provided drawings.
»
»
»
»
»
The Pro-Shore Advantage
ATLAS SHORING ACCESSORIES PRO-SHORE MODULAR DECK SYSTEM Post Shores & Slab Guardrails Panels, Joints & Application
FX454Shoring Extension Frame4’W x 5’-4”’H Wt.=54 lbs.
FB45XShoring Base Frame
4’W x 5’H Wt.=58 lbs.
FB25XShoring Base Frame
2’W x 5’H Wt.=46 lbs.
FX244Shoring Extension Frame2’W x 4’-4”H Wt.=38 lbs.
FB46XShoring Base Frame
4’W x 6’H Wt.=66 lbs.
Item #
Spacing(Frame x
Lock) Diagonal WeightBC0445 4' x 4'/5' 69 7/8" 8 lb.BC0545 5' x 4'/5' -- 9 lb.BC0645 6' x 4'/5' 88 1/2" 11 lb.BC0745 7' x 4'/5' -- 12 lb.BC0845 8' x 4'/5' 109 5/16" 14 lb.BC1045 10' x 4'/5' 131 1/4" 16 lb.
Item# Description WeightBPFH Base Plate 8 lbs.JBPH Heavy Duty Screwjack w/Base Plate - 16" 19 lbs.JUHH Heavy Duty Screwjack w/J-Head 15 lbs.JCAP Jack Cap .5 lb.PA Adapter Pin 1 lb.PPH Gravity Lock Pin .25 lb.CTB Timber Bracing Clamp 2.5 lbs.BARSP1 Spacer Bar 15" (3/16") 1 lb.240085 Spacer Bar 8 1/2" (3/16") 1 lb.PCHW Coupling Insert Pin 2 lbs.
Speedlock Assembly .5 lb.
System Components1. Extension Frames2. Adapter Pins3. Base Frames4. Cross braces5. Universal Connector6. Speed Lock7. Swivel Base Jack8. Frame Base Plates9. End Cross Braces10. Split Ring.
BASE PLATE
HD SCREWJACKWITH BASE
PLATE
HD SCREWJACKWITH 14” J-HEAD
JACK CAP
ADAPTER PIN
GRAVITY LOCK PIN
TIMBER BRACING CLAMP
SPACER BAR
SPEEDLOCK ASSEMBLY
COUPLING INSERT PIN
BC1045
SHORING Shore “X” 11 Kip Steel Shoring Frames, Braces, & Accessories 12 Kip Aluminum Shoring System / Other Shoring Systems
(*) = Maximum load (recomended) for given span is deflection limited.(**) = Maximum load (recomended) for given span is shear limited.SAFETY FACTOR : 2.5:1Load ratings are based on uniformity distributed loads.Cantelever not to exceed 30% of span or 3'.Beam Weight / LF : 6.5" = 3.52 lb, 7.5" = 3.67lb
JOIST CLIP ASSEMBLY ALUMINUM BEAM
Aluminum Beam DataALUMINUM BEAMS
SCAFFOLDING FORMING SCAFFOLDING FORMING
�1
SCAFFOLDING FORMING SCAFFOLDING FORMING
Large Strong Frame with Wall Forms hung by rollers Raising the Wall Forms with built-in screw jacks
New at Atlas Sales!Reduce crane time with self-raising Jump Form