1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 A A B B C C D D BREAK AND DEBURR ALL SHARP EDGES DATE DATE DATE DECIMALS .X ` .050 .XX ` .010 .XXX ` .005 ANGLES ` .06~ NEXT ASSEMBLY WEIGHT: MATERIAL: APPROVED PROJ. MGR. RELEASED FRACTIONS THIRD ANGLE PROJECTION TITLE: REV WEIGHT: SCALE: DWG/PART NO: SIZE: OF DATE: SHEET DIMENSIONS ARE IN INCHES AND DEGREES UNLESS OTHERWISE NOTED. DIMENSIONING AND TOLERANCES IN ACCORDANCE WITH ANSI Y14.5-1994 DRAWN: This drawing is the property of SAWING SYSTEMS Incorporated, including all patented and pantentable features, confidential information and use hereof is conditioned upon the user's agreement not to reproduce the drawing, in whole or part, nor the material described thereon, nor the use of the drawing for any purpose other than specifically permitted in writing by SAWING SYSTEMS Incorporation. sawing systems inc. P.O. Box 3754 • Knoxville, TN 37927-3754 • (865) 525-0600 (800) 489-0601 • Telefax (865) 525-2320 DLL 1:16 3/8/2006 E-5107-7 E 1 1 RipCut w/Hyd. Tilt Arbor and Conveyor ` 1/16" 511B Floor High Point Operators Position ITEM QTY PART NUMBER DESCRIPTION 1 2 B-4002-2C Support Post - 511B 69-5/8" Finished Height 2 1 B-4005-1 Rail End - 511B 3 1 B-4036-1-102 Saw Rail Assembly - 8ft-6in. 4 1 B-4476-9A Manual Carriage Feed Assembly 5 2 B-4506-16D1 Support Bracket - Power Track Tray 6 1 B-4589-1 Altered Power Track Tray 7 1 B-4589-4 Bracket - Electrical Box 8 1 E-4092-1E 511 Rip/Cut Hyd Tilt Arbor 9 1 E-5013-2 511 Saddle Assembly 10 1 E-5107-2 Rail End - 511B Hydraulic Unit 11 1 E-5146-2F Conveyor Assembly, 28"Wide x 11-0' Lg. 12 1 E-5146-4D2 Adjustable Material Guide - Short Fence 13 1 BT-5000-052 SRC275 X 6" X 100" Bracket Position 2 Inward 14 1 EC-5000-1822 SPN12-363612 NEMA 12 Enclosure 15 1 EC-5000-2113 A161206LP NEMA 12 Enclosure 16 1 HP-5000-389 72400/25HP Hydraulic Power Unit 5'-9 5/8" [69 5/8 in] 1 1/2" Grout 44" 8'-6" [102 in] 19" 3'-2" [38 in] 4'-11 1/2" [59 1/2 in] 9'-11" [119 in] 22" 16" 10" 6" 1 1/4" 10'-2 9/32" [122 9/32 in] 5'-1 1/2" [61 1/2 in] 21" 68" Carriage Travel 7 7/16" 21" 21 1/4" 12 3/4" 9'-11" [119 in] 4'-11 1/2" [59 1/2 in] 4'-11 1/2" [59 1/2 in] 25" 19" 44" 44" 25" 11'-" [132 in] 13'-2 3/16" [158 3/16 in] 30 11/16" Working Height 1 5 6 13 9 16 14 7 11 8 4 10 2 3 15