123 S A F SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent • Class I, Division 2, Groups A, B, C & D • Class II, Division 1 & 2, Groups E, F & G • Class III • Zone 2, Groups IIA, IIB & IIC • UL 844 Hazadardous Locations • UL 1598 Wet Locations • UL 1598A Marine Outside Type • UL 924 Emergency Lighting • NEMA 3R & 4X • IP66 • CSA Certified • Restricted Breathing (175W Max.) • AExnR II, ExnR II & T3 • Enclosed & Gasketed
18
Embed
SAF SERIES - Platt Electric Supply · SAF SAFR SAF LARGE SR25D SR25A SR40HB SR40D SR40A SR40DD : SRE22GL SRE45G-L: SGL25T: SRE23GL : SGL40T: SRE43G-L SRE25GL : SRT25GL: SRE42G-L:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
123
S A F
SAF SERIESHazardous Location Mogul Base HID and Compact Flourescent
• Class I, Division 2, Groups A, B, C & D
• Class II, Division 1 & 2, Groups E, F & G
• Class III
• Zone 2, Groups IIA, IIB & IIC
• UL 844 Hazadardous Locations
• UL 1598 Wet Locations
• UL 1598A Marine Outside Type
• UL 924 Emergency Lighting
• NEMA 3R & 4X
• IP66
• CSA Certified
• Restricted Breathing (175W Max.)
• AExnR II, ExnR II & T3
• Enclosed & Gasketed
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
RIG-A-LITE124
SAF SERIESHazardous Location Mogul Base HID and Compact Flourescent
Large hinge permits fixture to open for “hands free” wiring. Also allows better heat dissipation of internal components.
Corrosion resistant high strength fiberglass reinforced polycarbonate guard provides protection to the globe.
All external hardware is stainless steel. Stainless steel inserts are available as an option.
All exterior surfaces are covered with corrosion and chemical resistant baked epoxy.
Ballast housing and outlet boxes are high strength, corrosion resistant copper-free cast aluminum alloy.
Superior heat resistant silicone o-ring gasket makes fixture for installation indooors or outdoors. Other materials available.
Heat-resistant tempered prismatic glass globe is standard and is suitable for hose down applications.
Suitable for installation on marine environments where equipment is subject to salt water spray, either indoor or outdoor.
• UL 844 Hazardous Locations• UL 924 Emergency Lighting• UL 1598A Marine Outdoor
• Enclosed and Gasketed• Suitable for wet locations• Suitable for hose down applications
1 BASIC SERIESH SAF Hazardous Location HID and CFLClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass III Zone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66 UL 1598, 1598A & 844UL 924 Emergency Lighting CSA CertifiedRestricted Breathing (175W Max.) (Annual Testing Not Required)
BASIC SERIES SAFRH
SAFR Hazardous Location HID & CFL Class I, Division 2, Groups A, B, C & DEnclosed & GasketedWet LocationsNEMA 3R & 4XUL 1598, 1598A & 844CSA CertifiedIP66
GLOBE & GUARD GG = Globe and Guard PG = Poly Globe and Guard (42 Watt CF Max) G = Globe only R2 = Type II (Asymmetric ) Closed Bottom Glass Refractor R3 = Type III (Asymmetric) Closed Bottom Glass Refractor R5 = Type V (Symmetric) Closed Bottom Glass RefractorR2G = Type II (Asymmetric) Closed Bottom Glass Refractor with Guard R3G = Type III (Asymmetric) Closed Bottom Glass Refractor with Guard R5G = Type V (Symmetric) Closed Bottom Glass Refractor with Guard T1 = Type I (Asymmetric ) Closed Bottom Threaded Glass Refractor T3 = Type III (Asymmetric ) Closed Bottom Threaded Glass Refractor T5 = Type V (Symmetric ) Closed Bottom Threaded Glass Refractor T1G = Type I (Asymmetric ) Closed BottomThreaded Glass Refractor with Guard T3G = Type III (Asymmetric ) Closed BottomThreaded Glass Refractor with GuardT5G = Type V (Symmetric ) Closed BottomThreaded Glass Refractor with Guard
6 MOUNTING STYLE P = 3/4" Pendant Mount P1 = 1" Pendant Mount F = 3/4" Flexible Pendant Mount F1 = 1" Flexible Pendant Mount C = 3/4" Ceiling Mount C1 = 1" Ceiling Mount W = 3/4" Wall Mount W1 = 1" Wall Mount S = 1-1/4" 25° Stanchion Mount S1 = 1-1/2" 25° Stanchion Mount L = 1-1/4” 90° Stanchion Mount L1 = 1-1/2” 90° Stanchion Mount K = 3/4" Cone Top K1 = 1" Cone Top
TB = Terminal Block R = Instant Restrike (HPS Only) PS = Pulse Start EM = Emergency (Fluorescent Only)
Catalog Number Logic
2
3
5
SAF 15-S-04-GG-P-XX1 2 3 4 5 6 7
7
HRefer to Certification Guide to determine suitability of individual fixture.Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.
1 HID fixtures for Mogul Base lamps only.2 Consult factory for pricing.3 Quartz option available only with R2, R3 and
R5 refractors and with vertical mount only. Option not available with globe and guard. Reflectors cannot be added.
4 Not available with multi-tap ballast unless incoming voltage is specified. When installed, one fuse block is provided for 120, 277V and two fuse blocks are provided for 208, 240 and 480V. Fuse not included.
5 Fuse option not available for marine listed fixtures.
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
125
SAF SeriesHIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
Certification Guide
*GROUPS E & F ONLY FOR STANCHION MOUNT. GROUPS E, F, & G FOR ALL OTHER MOUNTS. NOTE: ALL SAF SERIES FIXTURES WITH GLOBE AND GUARD RATED 175W MAXIMUM AT 40° C ARE ADDITIONALLY LISTED FOR CLASS I ZONE 2 AEx OR EX nR II AND ARE MARKED WITH THE OPERATING TEMPERATURE 160° C OR CODE T3
MODEL AMBIENT ° C
CLASS I, DIV 2 GROUPS A,B,C,D CLASS II & IIISIMULTANEOUS
➀ 52 (2-26W Lamps); 64 (2-32W Lamps); 84 (2-42W Lamps) ➁ 120V thru 277V AC, 50/60HZ; 125V DC➂ Catalog Nos. shown are for fixtures with IES Type V closed bottom glass refractors, for other type refractors, refer to Catalog Number Logic page 125.
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
145
SAF SeriesHIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
Fluorescent with Threaded Refractor and Guard 26-84 Watts (continued)(Lamps included)
High Pressure Sodium 70, 100 and 150 Watt Metal Halide 175 WattFixture Dimensions (inches)
H Refer to Certification Guide on page 126 to determine suitability of individual fixture.
PENDANT MOUNT with Threaded Glass Refractor and Guard
RIGID, FLEX PENDANTwith Globe, Guard and Reflector
CONE MOUNTwith Refractor
STANCHION MOUNT with Globe, Guard and Reflector
CEILING MOUNT with Globe, Guard and Reflector
WALL MOUNT with Globe, Guard and Reflector
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
146
SAF SeriesHIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
High Pressure Sodium 250 and 400 Watt Metal Halide 250 and 400 WattFixture Dimensions (inches)
H Refer to Certification Guide on page 126 to determine suitability of individual fixture.
RIGID, FLEX PENDANTwith Globe, Guard and Reflector
CONE MOUNTwith Refractor
STANCHION MOUNT with Globe, Guard and Reflector
CEILING MOUNT with Globe, Guard and Reflector
WALL MOUNT with Globe, Guard and Reflector.
147
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
RIG-A-LITE
SAF SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA CertifiedHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
SAF SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA CertifiedHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
HLP-120
HLP-208-277
H Refer to Certification Guide on page 126 to determine suitability of individual fixture.
Closed Bottom Glass Refractor.12 in. dia. for use with 5-1/2 in. Globe Thread.
Closed Bottom Glass Refractor.12 in. dia. for use with 7-3/4 in.Globe Thread.
Closed Bottom Threaded Glass Refractor. For use with 7-3/4 in. Globe Thread.
Fixtures ordered with refreactors are not suitable to be ordered with reflectors.
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
150
SAF SeriesHIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
Parts List CATALOG NUMBER SAF15-S-04-GG-P
Note: 1. Above drawing and part numbers are for fixture catalog no. SAF15-S-04-GG-P 2. Parts may vary for other models. Contact factory if parts for other models are required. 3. Ballasts and lamps are listed on separate pages.
151
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
RIG-A-LITE
SAF SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA CertifiedHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
HIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT
Parts List
Part No. Description Weight 02177 BLST & CAP HPS 150W MULTI-TAP 8.2 16101P HSG BLST SAF 150/250W 5.1 26024 BRKT CAP HOLD DOWN SAF 0.2 26025P BRKT BLST HOLDDOWN SAF 0.4 26026 REFLECTOR ALZAK SAF 0.1 28022 SCREW HEXWSHRSLOT 0.1 28023 SCREW HEXWSHRSLOT 0.1 28024 SCREW HEXWSHRSLOT 0.1 28027 SCREW HEXWSHRSLOT 0.1 28029 SCREW HEXWSHRSLOT 0.1 28031 WASHER NYLON 0.1 28108 SCREW PAN 0.1 34022 GSKT SILICONE GLOBE 250 0.2 34024 GSKT SILICON LPHLDR SAF 0.1 34027 GSKT SILICONE O-RING 0.2 38038 CLAMP IGNITOR (FOR HPS PULSE START FIXTR ONLY) 0.1 38076 CLAMP GEAR SS 0.1 70043 LPHLDR PORCLN MOG 4KV 0.5 82046 WIRE ULCSA GRN 16AWG 0.1 84073 LUG RNG N/INS 16-14AWG 0.1 86243 BOOT CAPACITOR (FOR OIL FILLED CAPS) 0.2 SGL25T GLOBE CLEAR SAF SERIES 4.0 SGU25P GUARD SAF SERIES 250WATT 0.3 SMP BOX OUTLET SAF PENDANT MOUNT 3.3
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 • Wet Locations • CSA Certified
152
SAF SeriesHIGH PRESSURE SODIUM • METAL HALIDE • FLUORESCENT