Introduction: SABIT MC - 0, Cold applied product, easy to apply, it doesn't need thinning or heating. Uses & Application: SABIT MC - 0, suitable for use in the construc- tion & maintenance of pavement as designated in MOC Specification. It is ideal for prime coat. SABIT MC - 0 is applied to asphalt or granular surfaces using truck mounted spray equipment. Coverage: Priming is accomplished by spraying 0.65 - 1.75 liters/m 2 , the exact rate depends on the porosity of the prepared soil surface. Health & Safety: Workers should wear protective gloves, and goggles during application. SABIT MC - 0 contains volatile solvent and have low flash point. Care must be taken to ensure that there is adequate ventilation in the working place. Fires and naked flames should be kept at a distance. Packing & Storage: SABIT MC - 0 can be supplied in bulk, drums and cans. Store in dry and shaded area in original packing. The container should be kept covered while working in order to prevent the evaporation of solvent. TECHNICAL DATA SABIT MC - 0 (MEDIUM CURING CUT-BACK ASPHALT COMPLIES WITH MOC Specification for Road and Bridge Construction Table 3 of section 4.04)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Introduction:
SABIT MC - 0, Cold applied product, easy to apply, it doesn't need thinning or heating.
Uses & Application:
SABIT MC - 0, suitable for use in the construc-tion & maintenance of pavement as designated in MOC Specification. It is ideal for prime coat. SABIT MC - 0 is applied to asphalt or granular surfaces using truck mounted spray equipment.
Coverage:
Priming is accomplished by spraying 0.65 - 1.75 liters/m2, the exact rate depends on the porosity of the prepared soil surface.
Health & Safety:
Workers should wear protective gloves, and goggles during application. SABIT MC - 0 contains volatile solvent and have low flash point. Care must be taken to ensure that there is adequate ventilation in the working place. Fires and naked flames should be kept at a distance.
Packing & Storage:
SABIT MC - 0 can be supplied in bulk, drums and cans. Store in dry and shaded area in original packing. The container should be kept covered while working in order to prevent the evaporation of solvent.
TECHNICAL DATA
SABIT MC - 0
(MEDIUM CURING CUT-BACK ASPHALT COMPLIES WITH MOC Specification for Road and Bridge Construction Table 3 of section 4.04)
Related Documents
