This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
IntroductionSABIT PMB is a polymer modi�ed bitumen consisting of high-quality bitumen binder compounded with the highest quality elastomeric polymers and processed in a state-of-the-art mixing plant to obtain a totally consistent and homogenous PMB meeting the requirements of performance grade super-pave system.
SABIT PMB PRODUCTS are generally composed of elastomeric, plastomeric compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties for PMB.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN, COMPLIES WITH AASHTO M320)
IntroductionSABIT PMB is a polymer modi�ed bitumen consisting of high-quality bitumen binder compounded with the highest quality elastomeric polymers and processed in a state-of-the-art mixing plant to obtain a totally consistent and homogenous PMB meeting the requirements of performance grade super-pave system.
SABIT PMB PRODUCTS are generally composed of elastomeric, plastomeric compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties for PMB.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN, COMPLIES WITH AASHTO M320)
Used in super-pave mix design for central plant of hot mix asphalt. General practices as outlined by the Ministry of Transport should be followed in mixing.
Coverage
It depends on the mix design.
Precautions
Care should be taken when heating SABIT PMB to avoid overheating.
Storage and HandlingHeating and storage procedures for PMB must be followed at all times.
Manufacturer's WarrantySubject to conditions and limitations of Saudi Bitumen Industries Co. Ltd.(SABIT) written warranty.
PackingInsulated PMB tankers.
FeaturesExcellent performance properties, improved resistance to rutting, shoving, stripping, water stripping, cracking and have excellent adhesionExhibits very good ageing and weathering resistanceExhibits good storage stability for 48 hours at 150-170 ºCIf required, it is easily reheated up to the needed temperature. It does not a�ect the quality in normal conditions.Easily to handle and no strong odor during heating and mixingLocally available in Saudi Arabia and delivered in very short noticeExcellent technical support and application or usage guidance, as well as after sales services available to the contractors
Note :Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the composition and/or utilization of its products without prior notice, consequently, orders will be �lled according to the latest speci�cations.
SBIT PMB PAVE FLEX 140 is a polymer modi�ed bitumen consist of the select bitumen binder that is modi�ed by the addition of PAVEFLEX 140 polymer, produced in a specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the require-ments of the performance grade of the super-pave system.
PAVEFLEXPRODUCTS generally composed of elastomeric, plastomeric, compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties from PMB.
PAVEFLEX 140 polymer is used to produce all kind of PG Grading such as PG70-10, PG76-10 & PG82-10 according to proper percentage.
Instruction for Application
Used in super-pave mix design for acentral plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Storage & Transportation
SABIT PMB PAVEFLEX 140 is to be stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PAVEFLEX 140 should only be done by using insulated trucks, free from any signi�cant material which might contaminate and a�ect the product such as fuel, oil and emulsi�ed bitumen.
Coverage
Depends on the mix design.
Precaution
Care should be taken when heating SABIT PAVEFLEX 140 to avoid overheating.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Features
Excellent performance properties, improved resistance to rutting shoving, stripping, water stripping, cracking and have excellent adhesion.Exhibits very good ageing & weathering resistance Exhibits good storage stability for 48 hours at 150-170°CIf required, it is easily reheated up to the required temperature. It doesn't a�ect the quality in normal conditions. Cost saving compared to currently used materials Easy to handle, with no hard smell during heating and mixing.Locally available in Saudi Arabia and delivered in very short time.Excellent technical support and application or usage guidance, as well as after sales service available to the contractors.
SBIT PMB PAVE FLEX 140 is a polymer modi�ed bitumen consist of the select bitumen binder that is modi�ed by the addition of PAVEFLEX 140 polymer, produced in a specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the require-ments of the performance grade of the super-pave system.
PAVEFLEXPRODUCTS generally composed of elastomeric, plastomeric, compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties from PMB.
PAVEFLEX 140 polymer is used to produce all kind of PG Grading such as PG70-10, PG76-10 & PG82-10 according to proper percentage.
Instruction for Application
Used in super-pave mix design for acentral plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Storage & Transportation
SABIT PMB PAVEFLEX 140 is to be stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PAVEFLEX 140 should only be done by using insulated trucks, free from any signi�cant material which might contaminate and a�ect the product such as fuel, oil and emulsi�ed bitumen.
Coverage
Depends on the mix design.
Precaution
Care should be taken when heating SABIT PAVEFLEX 140 to avoid overheating.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Features
Excellent performance properties, improved resistance to rutting shoving, stripping, water stripping, cracking and have excellent adhesion.Exhibits very good ageing & weathering resistance Exhibits good storage stability for 48 hours at 150-170°CIf required, it is easily reheated up to the required temperature. It doesn't a�ect the quality in normal conditions. Cost saving compared to currently used materials Easy to handle, with no hard smell during heating and mixing.Locally available in Saudi Arabia and delivered in very short time.Excellent technical support and application or usage guidance, as well as after sales service available to the contractors.
Requirement of the original binder Flash point, (COC), °C >230
<3.0Rotational Viscosity @ 135 °C pa s
<1.0Requirement of RTFO ResideMass Change, maximum %
70Dynamic Shear G*/ sin δ, minimum 1.00KPa, test temperature @10 rad/s, °C
70Requirement of RTFO Reside
Dynamic Sheer G*/sin δ, minimum 2.20KPa, test temperature @10 rad/s, °C
70Requirement of RTFO ResideMSCR Jnr3.2 test temperature, °C≤2.0 KPa-1 (H)
PG70-10
Introduction
SABIT PMB POLYBILT 101 is a polymer modi�ed bitumen formulated from ductile bitumen binder that is modi�ed by the addition of POLYBILT 101 polymer, produced in specialized mixing plant in order to obtain a totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.
Instruction for Application
Used in hot asphalt mixes manufactured by central plants. General practices as outlined by Ministry of Transport should be following in mixing.
Storage & Transportation
SABIT PMB POLYBILT 101 is to be Stored in the insulated tanks with proper heating and circulation system.Only use trucks without any signi�cant material such as fuel, oil or emulsi�ed bitumen which may a�ect the product.
Coverage
Depends on the mix design.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
Health & safety
Workers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
Precaution
Care should be taken when heating SBIT PMB POLYBILT 101 to avoid overheating.
SABIT PMB ELVALOY is a polymer modi�ed bitumen consist of the neat bitumen binder that is modi�ed by the addition of ELVALOY polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.
Instruction for Application
Used in super-pave mix design for a central plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Coverage
Depends on the mix design.
Storage & Transportation
SABIT PMB ELVALOY is to be Stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PMB ELVALOY should be done using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Health & safety
Workers should wear protective masks, gloves and goggles during application.
Precaution
Care should be taken when heating SABIT PMB ELVALOY to avoid over heating
SABIT PMB CRUMP RUBBER is a polymer modi�ed bitumen consisting of bitumen binder that is modi�ed by the addition of CRUMB RUBBER polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.
Instruction for Application
Used in super-pave mix design for a central plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Coverage
Depends on the mix design.
Storage & Transportation
SABIT PMB CRUMB RUBBERB is to be Stored in the insulated tanks with proper heating and circulation system.Transportation of SABIT PMB CRUMB RUBBER by using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Health & safety
Workers should wear protective masks, gloves and goggles during application.
Precaution
Care should be taken when heating SABIT PMB to avoid over heating
SABIT PMB ELVALOY is a polymer modi�ed bitumen consist of the neat bitumen binder that is modi�ed by the addition of ELVALOY polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.
Instruction for Application
Used in super-pave mix design for a central plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Coverage
Depends on the mix design.
Storage & Transportation
SABIT PMB ELVALOY is to be Stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PMB ELVALOY should be done using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Health & safety
Workers should wear protective masks, gloves and goggles during application.
Precaution
Care should be taken when heating SABIT PMB ELVALOY to avoid over heating
SABIT PMB CRUMP RUBBER is a polymer modi�ed bitumen consisting of bitumen binder that is modi�ed by the addition of CRUMB RUBBER polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.
Instruction for Application
Used in super-pave mix design for a central plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.
Coverage
Depends on the mix design.
Storage & Transportation
SABIT PMB CRUMB RUBBERB is to be Stored in the insulated tanks with proper heating and circulation system.Transportation of SABIT PMB CRUMB RUBBER by using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)
ORIGINAL BINDER
ROLLING THIN FILM OVEN (RTFO) RESIDUE
Health & safety
Workers should wear protective masks, gloves and goggles during application.
Precaution
Care should be taken when heating SABIT PMB to avoid over heating