This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
CONSTRUCTION• All housing components shall be die-cast
aluminum 360 alloy, sealed with continuous silicone rubber gaskets
• Standard configurations do not require a flat lens, optional lenses shall be tempered glass
• All internal and external hardware shall be stainless steel
• Luminaire finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish.
• Optical bezel finish shall match the luminaire housing
OPTICS• Optical cartridge system consisting of a die cast
heat sink, LED engine, LED lamps, TIR optics, gasket and bezel plate.
• Cartridge is easily disassembled to replace components. Optics are held in place without the use of adhesives.
• Molded silicone gasket ensures a weather-proof seal around each individual LED.
• Features revolutionary individual LED optical control based on high performance TIR optical designs.
• House Side Shield is available on Standard and Clear Lens options except any Type 5 distribution. House Side Shield is not available for any distribution using a Diffused Lens.
CONTROLS• Egress adapter(s) shall slip over a 4"/100mm
DIA. pole with the luminaire or arm slipping over the adapter to add a total of 4.5”/114mm to the overall height. Adapter(s) shall be prewired, independently rotatable 359°, and have a cast access cover with an integral lens and lanyard.
• Photocell adapter shall include an internal twist lock receptacle. Photocell by others.
• Egress adapter shall require an auxiliary 120 volt supply for operation of an integral MR16 lamp in the event of emergency. The lamp may be aimed and locked into position with an adjustment range of 15°-45°. Adapter shall have a socket that accepts miniature bi-pin MR16 lamps up to 50 watts, lamp by others
CERTIFICATIONS• Luminaire shall be listed with ETL for outdoor,
wet location use, UL1598, UL 8750 and Canadian CSA Std. C22.2 no.250.
WARRANTY• See HLI Standard Warranty for additional
information
SPECIFICATIONS
INSTALLATION • Luminaire shall be attached to the arm
assembly with three stainless steel bolts. The connection shall be sealed with a silicone compression gasket
• Post top arms and brackets shall slip over a 4"/100mm O.D. or a 5"/127mm as configured and secured with six stainless steel set screws.
• Wall mounted arms and brackets shall require mounting hardware by others
ELECTRICAL• Luminaires shall have integral surge protection
that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J
• Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC
• Drivers shall not be compatible with current sourcing dimmers, consult factory for current list of known compatible dimming systems, approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV
• Driver and surge suppressor shall be mounted to a prewired tray with quick disconnects that may be removed from the gear compartment
KEY DATA
LUMEN RANGE 2071-31,000
WATTAGE RANGE 25-328
EFFICACY RANGE (LPW) 62-126
LIFE (HOURS) NA
INPUT CURRENT RANGE (mA)
640-2000 mA
EPA 0.86 - 3.39
CATALOG #:
RND RNI
RELATED PRODUCTS
Pursuit Down Light RNID
PURSUIT
• 2’, 3’, 4’, 6’ & 8’ Housing Lengths
• Sections can be joined for runs up to 150’ with seamless lens
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
.750
2.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 210 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
.750
2.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 210 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
.750
2.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 410 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
.500
2.500
1.100
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 610 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
13.313
5.000
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 710 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
LSMD LSMU/LSMUD
2.550
3.650
2.550
4.225
24.500
FIXTURE
FIXED ARM
MULLION
WALL
PENDANT
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 110 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
6.0302.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 110 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
6.0302.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 110 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
4.802
6.0302.8022.80" 6.03"
4.80"
0.75"
2.802"
ADJUSTABLE ARM
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 310 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
6.000
5.051
5.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 310 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
6.000
5.051
5.802
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 310 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
6.000
5.051
5.8025.80"
5.05"
6.0"
2.5"0.5"
24.5"
4.80"
5.00"
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 710 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
LSMD LSMU/LSMUD
2.550
3.650
2.550
4.225
24.500
RN-D RN-I, RN-ID
24.5" 2.55" 2.55"
4.225"3.65"
2ft fixture has 1 mounting point
ADJUSTABLE ARM
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 310 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA
REVISION:SHEET SIZE:
B A
FRACTIONS= ±1/32
6.000
5.051
5.802
5.05"
6.0"
4.80” 4.80”
5.80” 5.80”
WALL
F
E
D
C
B
A
1 32 4 5 76 8
REV STATUS DATE CHG'D APP'D
SCALE:
MATERIAL:
FINISH:
DRAWN BY:
CHECKED BY:
TOLERANCES UNLESS NOTED
.XX=
.XXX=
ANGLES=
A
B
C
D
E
LSM SPEC SHEET DRAWINGS
G. GUERRA
.03"
.015"
0° 30'
INITIAL RELEASE
SHT 210 SHTS
PART/DWG NUMBER:TITLE:
This document contains confidential and proprietary information Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rightsto reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, withoutthe specific written authorization of HLI, may violate the intellectual property rights of HLI. 17760 Rowland Street, City of Industry, CA 91748 USA