Rittal RiLine60 busbar systems 800 A (60 mm) Busbar supports (3-pole) 350 Rittal Catalogue 32/Power Distribution B 2.2 Rittal RiLine60 busbar systems 800 A (60 mm) 1 3 2 3 5 6 4 Material: Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0. Colour: RAL 7035 Short-circuit protection diagram, see page 1229. Technical information for the calculation of rated currents, see page 1247. Design Packs of With external attachment With internal attachment Page Number of poles 3-pole 3-pole Bar centre distance 60 mm 60 mm For busbars E-Cu 12 x 5/10 mm 1) , 15 x 5 – 30 x 10 mm Tightening torque ● Assembly screw (M5 x 16) ● Lid attachment 3 – 5 Nm 1 – 3 Nm 3 – 5 Nm 1 – 3 Nm Model No. SV 4 9340.010 9340.000 Accessories End covers for contact hazard protection on the sides 2 9340.070 9340.070 Spacers for SV 9340.000/.010 12 9340.090 9340.090 400 1) If 12 x 5/10 mm busbars are used, the spacer SV 9340.090 is additionally required. 1 2 3 Busbars E-Cu To DIN EN 13 601. Length: 2400 mm/bar. Dimensions in mm Packs of Model No. SV Page 12 x 5 6 3580.000 12 x 10 6 3580.100 15 x 5 6 3581.000 15 x 10 6 3581.100 20 x 5 6 3582.000 20 x 10 6 3585.000 25 x 5 6 3583.000 30 x 5 1) 6 3584.000 2) 30 x 10 1) 6 3586.000 2) Accessories Busbar cover section (length 1 m/each) 10 3092.000 408 Busbar connector for E-Cu 12 x 5 – 15 x 10 mm (single connection) 3 9350.075 410 20 x 5 – 30 x 10 mm (single connection) 3 9320.020 410 20 x 5 – 30 x 10 mm (bayed connection) 3) 3 9320.030 410 1) Other busbar lengths, see page 409. 2) Tin-plated version available on request. 3) From enclosure to enclosure. 4 5 6 Busbar connection adaptors Page 356/357 Connection clamps Page 358 OM/OT adaptors Page 362 – 367 OM/OT supports Page 368/369 Component adaptors Page 359 – 361, 370/371 Bus-mounting fuse bases Page 372/373 NH fused isolators Page 374 NH bus-mounting on-load isolators Page 375 – 379 Accessories Page 400 – 411 With attachment holes on the inside 2 With attachment holes on the outside 1
37
Embed
Rittal RiLine60 busbar systems 800 A (60 mm) · 2009-12-28 · System components (3-pole) Rittal RiLine60 busbar systems 800 A (60 mm) Rittal Catalogue 32/Power Distribution 351 B
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Rittal RiLine60 busbar systems 800 A (60 mm)Busbar supports (3-pole)
350 Rittal Catalogue 32/Power Distribution
B
2.2
Rit
tal
RiL
ine
60
bu
sb
ar
sy
ste
ms
80
0 A
(6
0 m
m)
1 3 2 3
5 6
4
Material:Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Short-circuit protection diagram, see page 1229.
Technical information for the calculation of rated currents, see page 1247.
Design Packs of With external attachment With internal attachment Page
Number of poles 3-pole 3-pole
Bar centre distance 60 mm 60 mm
For busbars E-Cu 12 x 5/10 mm1), 15 x 5 – 30 x 10 mm
Tightening torque ● Assembly screw (M5 x 16) ● Lid attachment
3 – 5 Nm 1 – 3 Nm
3 – 5 Nm 1 – 3 Nm
Model No. SV 4 9340.010 9340.000
Accessories
End covers for contact hazard protection on the sides 2 9340.070 9340.070
Spacers for SV 9340.000/.010 12 9340.090 9340.090 400
1) If 12 x 5/10 mm busbars are used, the spacer SV 9340.090 is additionally required.
Base trayFor rear contact hazard protection of the flat bar assembly.
Cover sectionMay be cut to length as required; for clip-on mounting to the base tray.
Base tray and cover section Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Note:If the cover section is mounted from the front, the support panel (SV 9340.220) is needed for stability.
Length (L) mm Packs of Model No. SV
500 2 9340.100
700 2 9340.110
900 2 9340.120
1100 2 9340.130
2400 1 9340.170
1
Length (L) mm Packs of Model No. SV
700 2 9340.200
1100 2 9340.210
2
1
2
Base tray infill For rear contact hazard protection when connect-ing the busbars from enclosure to enclosure.
Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Assembly parts.
Packs of Model No. SV
2 9340.140
Base tray reinforcement For clipping into the base tray. Required when using OT adaptors or supports, see page 366/367 and 369.
Material:Aluminium
Note:Self-tapping screws (Model No. SZ 2487.000) for attaching the base tray reinforcement to the mounting level, see page 1011.
Length (L) mm Packs of Model No. SV
500 2 9340.150
1000 2 9340.160
Support panel for cover section To prevent side access to the cover section. The support panel also provides additional stability.
Material:Polyamide (PA 6.6). Continuous operating temperature max. 105°C. Fire protection corresponding to UL 94-V0.
1) For Rittal TS 8/ES enclosure systems. 2) To order tin-plated version, please add extension .2X0 to the Model No. Delivery times available on request. 3) From enclosure to enclosure. 4) Two PLS rail connectors (single connection) are required to fit one expansion connector.
Base trayFor rear contact hazard protection of the PLS busbar assembly.
Cover sectionMay be cut to length individually, for clip-on mounting to the base tray for PLS system 800 A and 1600 A.
Base tray and cover section Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Note:If the cover section is mounted from the front, the support panel (SV 9340.220) is needed for stability.
Length (L) mm
Packs of
Model No. SV For system
PLS 800 PLS 1600
500 2 9341.100 9342.100
700 2 9341.110 9342.110
900 2 9341.120 9342.120
1100 2 9341.130 9342.130
2400 1 9341.170 9342.170
Height (H) mm 32 43
1
Length (L) mm Packs of Model No. SV
700 2 9340.200
1100 2 9340.210
2
Base tray infill For rear contact hazard protection when connect-ing the busbars from enclosure to enclosure.
Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Assembly parts.
For systemHeight (H)
mmPacks of Model No. SV
PLS 800 32 2 9341.140
PLS 1600 43 2 9342.140
Base tray reinforcement For clipping into the base tray. Required when using OT adaptors or supports, see page 366/367 and 369.
Material:Aluminium
Note:Self-tapping screws (Model No. SZ 2487.000) for attaching the base tray reinforcement to the mounting level, see page 1011.
Length (L) mm
Packs of
Model No. SV For system
PLS 800 PLS 1600
500 2 9341.150 9342.150
1000 2 9341.160 9342.160
Support panel for cover section To prevent side access to the cover section. The support panel also provides additional stability.
Material:Polyamide (PA 6.6). Continuous operating temperature max. 105°C. Fire protection corresponding to UL 94-V0.
End covers for contact hazard protection on the sides 2 9341.070 9342.070
Base tray 353
Cover section 353
Base tray infill 353
Base tray reinforcement 353
Support panel 353
1 2
3
PLS special busbars made from E-Cu
For Rittal system Packs of PLS 800 PLS 1600
Rated current max. 700 A 1400 A
Cross-section 300 mm2 900 mm2
Bar thickness 5 mm 10 mm
Length mm
For enclosure width mm
Model No. SV Model No. SV
495 6001) 3 3524.0002) 3527.0002)
695 8001) 3 3525.0002) 3528.0002)
895 10001) 3 3525.0102) 3528.0102)
1095 12001) 3 3526.0002) 3529.0002)
2400 variable 1 3509.0002) 3516.0002)
1) For Rittal TS 8/ES enclosure systems. 2) To order tin-plated version, please add extension .2X0 to the Model No. Delivery times available on request.
Rittal RiLine60 busbar systems 800/1600 A (60 mm)Busbar connection adaptors (3-pole)
356 Rittal Catalogue 32/Power Distribution
B
2.2
Rit
tal
RiL
ine
60
bu
sb
ar
sy
ste
ms
80
0/1
60
0 A
(6
0 m
m)
1 2 3 3 4
Material:Punched section Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0. Cover ABS, fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Cover.
Note:The technical data given in the tables may vary for UL applications; see page 1235.
Material:Punched section SV 3439.010Fibreglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature max. 140°C. Fire protection corresponding to UL 94-V0. SV 9342.310/.320Polyamide (PA 6.6), 25 % fibreglass-reinforced.Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0.
Cover ABS, fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Cover.
Note:The technical data given in the tables may vary for UL applications; see page 1235.
SV 3439.010 When connecting round conduc-tors 300 mm2 with ring terminal, the terminal clamps fitted as standard in the busbar connec-tion adaptors must be replaced with screws and/or bolts M10.
Version (3 x 1-pole) Packs of Page
Rated current up to 600 A 800 A 1600 A
Rated operating voltage 690 V~ 690 V~ 690 V~
Outlet top/bottom top/bottom top/bottom
Connection of round conductors ● Fine wire with wire end ferrule ● Multi-wire
35 – 240 mm2 35 – 240 mm2
95 – 185 mm2
95 – 300 mm2– –
Clamping area for laminated copper bars ● with 5 mm bar thickness ● with 10 mm bar thickness
OM support45 x 208 mm 1 9340.260 9340.260 9340.260 9340.260 9340.260 9340.260 9340.260 368
55 x 208 mm 1 9340.270 9340.270 9340.270 9340.270 9340.270 9340.270 9340.270 368
Support frame 401
PinBlock for support frame 402
PinBlock Plus 402
Support rails 404/405
ST-Combi connector 403
1) Supply includes: Connector with connection facility for 3 main contacts (1.5 – 4 mm2).2) Supply includes: Sub-unit with connection facility for 3 main contacts (1.5 – 4 mm2) and 8 auxiliary contacts (0.5 – 2.5 mm2) including connector. 3) The lower support rail with special latch is secured from behind with the support frame loosened.4) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
Insert strip 10 mm 2 9340.290 9340.290 9340.290 400
OM support45 x 208 mm 1 9340.260 9340.260 9340.260 368
55 x 208 mm 1 9340.270 9340.270 9340.270 368
Support frame 401
PinBlock for support frame 402
PinBlock Plus 402
Support rails 404/405
1) The lower support rail with special latch is attached from the rear with the support frame loosened. 2) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
2) The lower support rail with special latch is secured from behind with the support frame loosened. 3) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
2) The lower support rail with special latch is secured from behind with the support frame loosened. 3) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
OT support45 x 230 mm 1 9341.260 9341.260 9341.260 9341.260 9341.260 9341.260 9341.260 9341.260 369
55 x 230 mm 1 9341.270 9341.270 9341.270 9341.270 9341.270 9341.270 9341.270 9341.270 369
Support frame 401
PinBlock for support frame 402
PinBlock Plus 402
Support rails 404/405
ST-Combi connector 403
1) Supply includes: Sub-unit with connection facility for 3 main contacts (1.5 – 4 mm2) and 8 auxiliary contacts (0.5 – 2.5 mm2) including connector. 2) The lower support rail with special latch is secured from behind with the support frame loosened. 3) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
2) The lower support rail with special latch is secured from behind with the support frame loosened. 3) Anti-slip guard for motor circuit-breaker brands Moeller, Siemens and Telemecanique. Without anti-slip guard for universal applications.
Clamping area for laminated copper bars 18.5 x 15.5 mm 32 x 10 mm
Tightening torque ● Terminal screw ● Bar attachment
8 – 10 Nm 4 – 6 Nm
30 – 32 Nm 12 – 14 Nm
For switchgear make/model
ABB S3, T3, T4 S5, T5
GE FE –
Merlin Gerin NS100, NS160, NS250 NS400, NS630
Moeller Electric NZM2 NZM3
Siemens VL160X, VL160, VL250 VL400, VL6304)
Telemecanique GV7 –
For bar thickness 5/10 mm 5/10 mm
Cable outlet at the top1) Model No. SV
1 9342.600 9342.700
Cable outlet at the bottom1) Model No. SV
1 9342.610 9342.710
Accessories
Insert strip 25 mm to extend the construction width from 140 mm to 190 mm
4 (1 set)
– 9342.720 400
Sliding block 6 9342.640 – 401
Connection bracket n n 403
1) Switch outlet or outgoing cable. 2) Derating may be necessary, depending on the application.3) With ring terminal. 4) Also required: Insert strip 25 mm (SV 9342.720).
Rittal RiLine60 busbar systems 800/1600 A (60 mm)Bus-mounting fuse bases (3-pole)
372 Rittal Catalogue 32/Power Distribution
B
2.2
Rit
tal
RiL
ine
60
bu
sb
ar
sy
ste
ms
80
0/1
60
0 A
(6
0 m
m)
Material:Bus-mounting fuse base: Fibreglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature max. 140°C. Fire protection corresponding to UL 94-V0.
Contact hazard protection cover: Polyamide (PA 6.6). Continuous operating temperature max. 105°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
For clamping screw attachment Packs of
Type D 02-E 18 (adaptor sleeve) D II-E 27 (adaptor screw) D III-E 33 (adaptor screw)
Material:Bus-mounting fuse base: Fibreglass-reinforced, thermoplastic polyester (PBT).Continuous operating temperature max. 140°C. Fire protection corresponding to UL 94-V0.
Contact hazard protection cover: Polyamide (PA 6.6). Continuous operating temperature: max. 105°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
For snap-on mounting Packs of
Type D 02-E 18 (adaptor sleeve) D II-E 27 (gauge ring) D III-E 33 (gauge ring)
Identification label support 6 3595.010 3595.010 406
Micro-switch 5 3071.000 3071.000 406
Lug terminal connection parts 1 set 3592.020 3592.020 407
Clamp-type terminal connection 1 set 3592.010 3592.010 407
1 2
NH on-load isolators, size 000 (3-pole)
Rittal RiLine60 busbar systems 800/1600 A (60 mm)
375Rittal Catalogue 32/Power Distribution
B
2.2
Rit
tal
RiL
ine
60
bu
sb
ar
sy
ste
ms
80
0/1
60
0 A
(6
0 m
m)
1 2 69.5
141
.5
89
Busbar adaptorFor mounting SV 3431.000 on 60 mm busbar systems.
Material:Fibreglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature: max. 140°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:35 mm2 connection cables fitted as standard.
Base trayFor rear contact hazard protection of the flat bar assembly.
Cover sectionMay be cut to length as required; for clip-on mounting to the base tray.
Base tray and cover section Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Note:If the cover section is mounted from the front, the support panel (SV 9340.224) is needed for stability.
Length (L) mm Packs of Model No. SV
1100 2 9340.134
1
2
1
Length (L) mm Packs of Model No. SV
1100 2 9340.214
2
Support panel for cover section To prevent side access to the cover section. The support panel also provides additional stability.
Material:Polyamide (PA 6.6). Continuous operating temperature max. 105°C. Fire protection corresponding to UL 94-V0.
1) PLS special busbars (1600 A). To order tin-plated version, please add extension .2X0 to the Model No. Delivery times available on request. 2) For Rittal TS 8/ES enclosure systems.3) From enclosure to enclosure. 4) Two PLS rail connectors (single connection) are required to fit one expansion connector.
Base trayFor rear contact hazard protection of the busbar assembly PLUS.
Cover sectionMay be cut to length as required; for clip-on mounting to the base tray.
Base tray and cover section Material:Thermally modified hard PVC. Continuous operating temperature max. 91°C. Fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Note:If the cover section is mounted from the front, the support panel (SV 9340.224) is needed for stability.
Length (L) mm Packs of Model No. SV
1100 2 9342.134
1
2
1
Length (L) mm Packs of Model No. SV
1100 2 9340.214
2
Support panel for cover section To prevent side access to the cover section. The support panel also provides additional stability.
Material:Polyamide (PA 6.6). Continuous operating temperature max. 105°C. Fire protection corresponding to UL 94-V0.
Rittal RiLine60 busbar systems 800/1600 A (60 mm)Busbar connection adaptors (4-pole)
384 Rittal Catalogue 32/Power Distribution
B
2.2
Rit
tal
RiL
ine
60
bu
sb
ar
sy
ste
ms
80
0/1
60
0 A
(6
0 m
m)
1 2 2
Material:Punched section Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0. Cover ABS, fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Cover.
Design (4-pole) Packs of Page
Rated current up to 125 A 250 A
Rated operating voltage 690 V~ 690 V~
Connection of round conductors ● Fine wire with wire end ferrule ● Multi-wire
10 – 25 mm2 16 – 35 mm2
35 – 120 mm2 35 – 120 mm2
Clamping area for laminated copper bars 10 x 7.8 mm 18.5 x 15.5 mm
Material:Punched section Polyamide (PA 6.6), 25 % fibreglass-reinforced. Continuous operating temperature max. 130°C. Fire protection corresponding to UL 94-V0. Cover ABS, fire protection corresponding to UL 94-V0.
Colour:RAL 7035
Supply includes:Cover.
1 2
SV 9342.310 with SV 9342.3141
SV 9342.320 with SV 9342.3242
Design Packs of Page
Rated current up to 800 A 1600 A
Rated operating voltage 690 V~ 690 V~
Outlet top/bottom top/bottom
Connection of round conductors ● Fine wire with wire end ferrule ● Multi-wire
95 – 185 mm2 95 – 300 mm2
––
Clamping area for laminated copper bars ● For 5 mm bar thickness ● For 10 mm bar thickness
33 x 27 mm 33 x 22 mm
65 x 27 mm 65 x 22 mm
Tightening torque 12 – 14 Nm 15 – 20 Nm
For bar thickness 5/10 mm 5/10 mm
Busbar connection adaptors (3 x 1-pole)Model No. SV
1 set (3)
9342.310 9342.320
Also required
Connection adaptor (expansion set for 4-pole configuration)