298 R Rittal busbar systems offer compact solutions for today’s low-voltage power distribution needs. The above example shows the cross-section of a power circuit-breaker panel with main busbar system, cable connection system and connection kits. Maxi-PLS offers a quick solution for power distribution for modular enclosure systems. C US Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
124
Embed
Rittal busbar systems offer compact solutions for today’s ...stevenengineering.com/Tech_Support/PDFs/71HB31PD.pdf · 298 R Rittal busbar systems offer compact solutions for today’s
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
298
R
Rittal busbar systems offer compact solutions for today’s low-voltage power
distribution needs.
The above example shows the cross-section of a power circuit-breaker panel
with main busbar system, cable connection system and connection kits.
Maxi-PLS offers a quick solution for power distribution for modular enclosure
systems.C US
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
299Rittal Handbook 31/Power Distribution Systems
B
2.
Pow
er D
istr
ibut
ion
Power DistributionBusbar systems From page 300Busbar systems up to 250 A (40 mm)Overview of Rittal Mini-PLS ............................................................ 300Rittal Mini-PLS system components ............................................... 302Mini-PLS Busbar connection adaptor ............................................................. 303Component adaptor 12 A/25 A ....................................................... 304Quick-fit component adaptor 25 A (32 A) ....................................... 305Component adaptor 40 A/100 A ..................................................... 306Bus-mounting fuse base/NH on-load isolator ................................. 307Busbar systems up to 360 A (40 mm)Overview......................................................................................... 301System components ....................................................................... 308Busbar connection adaptor ............................................................. 310Bus-mounting fuse base/NH on-load isolator ................................. 311Multi-functional component adaptor 12 A/25 A/40 A ...................... 312Multi-functional component adaptor 40 A/component adaptor 100 A .............................................................. 315Busbar systems up to 800 A/1600 A (60 mm)Overview......................................................................................... 316Busbar support ............................................................................... 318System components ....................................................................... 319Rittal Mini-PLS system components ............................................... 320Busbar connection adaptor ............................................................. 322Connection clamps/system covers ................................................. 324Multi-functional component adaptor 12 A/25 A/40 A ...................... 325Component adaptor 50 A/63 A/100 A/160 A .................................. 328Component adaptor 250 A/component support .............................. 333Bus-mounting fuse bases .............................................................. 334NH fused isolators, size 00 ............................................................ 336NH on-load isolators, size 000........................................................ 337NH bus-mounting fuse bases, size 00 ............................................ 338NH bus-mounting on-load isolatorSize 00............................................................................................ 338Size 1.............................................................................................. 339Size 2.............................................................................................. 340Size 3.............................................................................................. 341
Busbar systems up to 1250 A (100 mm)Overview......................................................................................... 342System components ....................................................................... 343Connection clamps/system covers ................................................. 344NH bus-mounting on-load isolatorSize 00............................................................................................ 345Size 1.............................................................................................. 346Size 2.............................................................................................. 347Size 3.............................................................................................. 348NH fused isolator, size 00............................................................... 349Busbar systems up to 1600 A (185 mm)Overview......................................................................................... 350System components ....................................................................... 351Connection clamps ......................................................................... 352NH fused isolators, size 00 – 3 ....................................................... 353Busbar systems up to 2500 A/3000 A (150 mm)Overview......................................................................................... 354System components ....................................................................... 355Mounting panel assemblyNH on-load isolatorSize 000/00/1.................................................................................. 358Size 2/3........................................................................................... 359BusbarsAnd accessories ............................................................................. 360Laminated copper barsAnd accessories ............................................................................. 361Busbar systemsAccessories .................................................................................... 362
Rittal Maxi-PLS From page 366Overview, Rittal SV-TS8 and Maxi-PLS ......................................... 366Rittal Maxi-PLS up to 2000 A Connector kits– 3-pole........................................................................................... 368– For coupling sets (3-pole) ............................................................ 370– For the rear section (3-pole) ........................................................ 372– For coupling sets – rear section (3-pole) ..................................... 374System components ....................................................................... 376Connection components ................................................................. 377Rittal Maxi-PLS up to 3200 AConnector kits– 3-pole........................................................................................... 378– For coupling sets (3-pole) ............................................................ 382– For the rear section (3-pole) ........................................................ 384– For coupling sets – rear section (3-pole) ..................................... 388System components ....................................................................... 390Connection components ................................................................. 391
Rittal Maxi-PLS SV-TS8 enclosures– For incoming/outgoing circuits ..................................................... 392– For Rittal NH fused isolators........................................................ 394– For NH fused isolators ................................................................. 396– For coupling sets ......................................................................... 399System components– For NH fused isolator panels ....................................................... 398– For coupling sets ......................................................................... 400Rittal Maxi-PLS accessoriesDevice module ................................................................................ 401Contact hazard protection cover ..................................................... 402Accessories .................................................................................... 404
ISV distribution enclosure From page 408Overview......................................................................................... 408ISV-TS8 enclosures for distribution enclosuresUp to 630 A..................................................................................... 409Up to 1600 A................................................................................... 410Installation modules ........................................................................ 411
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
300 Rittal Handbook 31/Power Distribution Systems
Busbar Systems Up To 250 A (40 mm)Overview of Rittal Mini-PLS
B
2.1
Bus
bar S
yste
ms
Up
To 2
50 A
(40
mm
)
Mini-PLS component adaptor 12/25/40/100 A
Mini-PLS quick-fit component adaptor 25 A (32 A)
NH on-load isolators,size 000
System components
Mini-PLS end cover
Mini-PLS base tray section
Mini-PLS busbar supports up to 250 A, 3-pole
Mini-PLS special busbars E-Cu 250 A, 120 mm2
Mini-PLS busbar connectorsup to 250 A
Mini-PLS cover sections
Assembly components
Mini-PLS busbar connection adaptor up to 63 A and up to 250 A
Mini-PLS bus-mounting fuse base D 02-E 18
Compact ● The busbars are pushed into
the one-piece support and locked into position
● Unrestricted top-mounting of the busbar supports and busbar connector sets with top-mounting components
● Precise-fit installation, because the construction height (160 mm) matches the installation space exactly
● Simple component assembly with plug and lock action from the front
The Rittal Mini-PLS busbar system with 40 mm bar center
distance maximizes the enclosure space and is easy to
assemble.
● The profile of the special rail offers high static and thermal
load capacities
● The components are simply connected from the front
● Busbar support suitable for top-mounting
● The end cover, base tray and cover section provide
contact hazard protection due to complete encapsulation
Busbar systems:Mini-PLSMini-PLS busbar system
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
301Rittal Handbook 31/Power Distribution Systems
Busbar Systems Up To 250 A (40 mm)Overview
B
2.1
Bus
bar S
yste
ms
Up
To 3
60 A
(40
mm
)System components
End cover
Base tray sections
Busbar supportup to 360 A, 3-pole
Busbars of E-Cu
System cover sections
● Busbar support including inserts for flat copper rails
● 40 mm bar center distance
● Contact hazard protection identical to the Rittal Mini-PLS
● Busbar cover sections may be used as an alternative
Cost-effective ● The inserts installed in the
busbar hold bar sizes of 12 x 5, 12 x 10 and 15 x 5 mm. Without the inserts, the maximum bar cross-section that can be used is 15 x 10 mm
● Simple component assembly by insertion and/or snap-on installation
● End cover, base tray section and cover section are identical to the Mini-PLS contact hazard protection
Multi-functional component adaptor 12/25/40 A
Component adaptor 100 A
NH on-load isolators,size 000
Assembly components
Cover sections Connection adaptor up to 360 A
Bus-mounting fuse base D 02-E-18
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 250 A (40 mm)Rittal Mini-PLS
302 Rittal Handbook 31/Power Distribution Systems
B
2.1
Bus
bar S
yste
ms
Up
To 2
50 A
(40
mm
) Mini-PLSBusbar supportMaterial:Polyamide (PA 6.6), 30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Short-circuit protection diagram, see page 1124.
Busbar supports:Mini-PLSSupport:Mini-PLS
26
16
10.5
6
18
145 12
510
4040
1 Rated current up to 250 A
Voltage up to
690 V~, 50/60 Hzto VDE 0660
Number of poles 3-pole
Bar center distance 40 mm
PU 4
Part No. SV 9600.000
2 1 3
5 6 4
4040
40
Mini-PLSEnd coverFor side contact hazard protection of the Mini-PLS assembly. For simple snap-on mounting onSV 9600.000.
End cover:for Mini-PLS busbar supports
2 PU Part No. SV2 9610.000
Mini-PLSSpecial busbarsE-Cu 250 A, 120 mm2 3 mm bar thickness.
Mini-PLSBusbar connectorsUp to 250 AFor connecting Mini-PLS special busbars; no drilling required. Maximum tightening torque 18 in/lbs.
E-Cu busbar connector:Mini-PLS;Connector:Mini-PLS
Length mm PU Part No. SV500 3 9601.000700 3 9602.000
1100 3 9603.0001500 3 9624.000
29
25
13
3
4
3
PU Part No. SV3 9611.000
4
Mini-PLSBase tray sectionsFor rear contact hazard protection of the Mini-PLS assembly.
Base tray sections:Mini-PLSCover sections:Mini-PLS
Mini-PLSCover sectionsMay be cut to length; for clip-on mounting onto the Mini-PLS base tray section.
MaterialBase tray and cover sections:Thermally modified hard PVC. Continuous operating temperature: Maximum 140°C (212°F). Fire protection to UL 94-V0.
Length (L) mm PU Part No. SV250 1 9604.000500 1 9605.000700 1 9606.000
1100 1 9607.000
160
47
20.5
L
L5
6
5
Length (L) mm PU Part No. SV250 1 9608.000500 1 9609.000
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Part No. SV 9613.000 9612.000AccessoriesLaminated copper bars � � 361
1) Wire end ferrules should be used with fine wire conductors.
1 2
System overview Page 300 Busbar system Page 302 Component adaptor Page 304 Bus-mounting fuse base Page 307 NH on-load isolator Page 307 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 300 Busbar system Page 302 Busbar connection adaptor Page 303 Bus-mounting fuse base Page 307 NH on-load isolator Page 307 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 300 Busbar system Page 302 Busbar connection adaptor Page 303 Bus-mounting fuse base Page 307NH on-load isolator Page 307 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Polyamide (PA 6.6),30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Note:The current carrying capacity of the supply cables fitted as standard can be found on page 1128.
Component adaptor:Mini-PLS
System overview Page 300 Busbar system Page 302 Busbar connection adaptor Page 303 Bus-mounting fuse base Page 307 NH on-load isolator Page 307 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
)Mini-PLSbus-mounting fuse baseD 02-E 18 & NEMAMaterial:Polyamide (PA 6.6), 30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Accessories:Micro-switch SV 3071.000, see page 363.
89
69.5
141.
5
2 Size 000
Rated current 100 A
Voltage 690 V~
Cable outlet top/bottom
Type of connection Terminalup to Ø AWG
Tightening torque 27 in/lbs
PU 1
Part No. SV 3431.000
Mini-PLSbusbar adaptorFor mounting SV 3431.000 on Rittal Mini-PLS.
Material:Polyamide (PA 6.6), 30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Configuration:1 AWG connection cables fitted as standard.
Busbar adaptor for NH isolators:size 000 (Mini-PLS) Adaptor for NH isolators:size 000 (Mini-PLS) Mini-PLS busbar system
90
160
64
3 PU Part No. SV1 9629.100
System overview Page 300 Busbar system Page 302 Busbar connection adaptor Page 303 Component adaptor Page 304 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 360 A (40 mm)System components
308 Rittal Handbook 31/Power Distribution Systems
B
2.1
Bus
bar S
yste
ms
Up
To 3
60 A
(40
mm
)
BusbarsMade from E-Cu To DIN EN 13 601Length: 2400 mm/bar
3 Dimensions mm PU Part No. SV
12 x 5 6 3580.00012 x 10 6 3580.10015 x 5 6 3581.00015 x 10 6 3581.100
2 1
4 5
3
4040
Busbar supportMaterial:Fiberglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature: Maximum 140°C (284°F).Fire protection to UL 94-V0.
Configuration:Inserts for adaptation of bar sizes 12 x 5 – 15 x 5 mm.
Short-circuit protection diagram, see page 1124.
Technical information For the calculation of rated currents,see page 1137.
Busbar supports:40 mm bar center distanceSupports:40 mm bar center distance
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Base tray sectionsFor rear contact hazard protection of the busbar assembly.
Base tray sections:Mini-PLSCover sections:Mini-PLS
Cover sectionsMay be cut to required length for clip-on mounting to the base tray section.
MaterialBase tray and cover sections: Thermally modified hard PVC. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
Length (L) mm PU Part No. SV250 1 9604.000500 1 9605.000700 1 9606.000
1100 1 9607.000
160
47
20.5
L
L4
5
4
Length (L) mm PU Part No. SV250 1 9608.000500 1 9609.000
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 360 A (40 mm)Busbar connection adaptor
310 Rittal Handbook 31/Power Distribution Systems
B
2.1
Bus
bar S
yste
ms
Up
To 3
60 A
(40
mm
)
68
182
115
37.537.5
System overview Page 301 Busbar system Page 308 Bus-mounting fuse base Page 311 NH on-load isolator Page 311Component adaptor Page 312 Accessories Page 360
Material:Polyamide (PA 6.6),30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Configuration:Cover
Note:Conductor connection clampsfor the connection of round conductors 16 – 4 AWG, see page 324.
Busbar connection adaptor:for 40 mm busbar systems
Rated current up to 360 A Page
Voltage 690 V~
Connection top/bottom
Connection of round conductors1) 6 AWG – 250 MCM
Clamping area for laminated copper bars 17 x 15 mm (maximum 360 A)
Tightening torque● Terminal screw 35 – 53 in/lbs
For busbars 12 x 5/10 mm 15 x 5/10 mm
PU 1 1
Part No. SV 9350.020 9350.030AccessoriesLaminated copper bars � � 361
1) Wire end ferrules should be used with fine wire conductors.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
)Bus-mounting fuse baseD 02-E 18Material:Polyamide (PA 6.6), 30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Busbar adaptorFor mounting SV 3431.000 on 40 mm busbar systems.
Material:Polyamide (PA 6.6), 30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Configuration:1 AWG connection cables fitted as standard.
Additional parts needed:
Base tray section,see page 309.
Busbar adaptor for NH isolators:size 000 (40 mm)Adaptor for NH isolators:size (40 mm)
90
160
64
3 For busbars mm PU Part No. SV
12 x 5/10 1 9350.40015 x 5/10 1 9350.410
System overview Page 301 Busbar system Page 308 Busbar connection adaptor Page 310 Component adaptor Page 312 Accessories Page 360
1
3 2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Polyamide (PA 6.6),30% fiberglass-reinforced. Continuous operating temperature:Maximum 140°C (284°F). Fire protection to UL 94-V0.
Note:The current carrying capacity of the supply cables fitted as standard can be found on page 1128.
Multi-functional component adaptor:for 40 mm busbar sys-temsComponent adaptor:for 40 mm busbar systems
System overview Page 301 Busbar system Page 308 Busbar connection adaptor Page 310 Bus-mounting fuse base Page 311NH on-load isolator Page 311 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 301 Busbar system Page 308 Busbar connection adaptor Page 310 Bus-mounting fuse base Page 311NH on-load isolator Page 311 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 360 A (40 mm)Multi-functional component adaptor 25 A/40 A
314 Rittal Handbook 31/Power Distribution Systems
B
2.1
Bus
bar S
yste
ms
Up
To 3
60 A
(40
mm
)
For snap-on mounting Page
Construction width (A) 45 mm 54 mm
Rated current up to 25 A 25 A 40 A 40 A
Voltage 690 V~ 690 V~ 690 V~ 690 V~
Cable outlet top top/bottom top top/bottom
Connection of round conductors up to 4 AWG 4 AWG 4 AWG 4 AWG
Support rails
Quantity 2 (1 variable) 2 2 2
Height 10 mm 10 mm 10 mm 10 mm
B variable 38.5 mm 38.5 mm 38.5 mm
C variable 100 mm 100 mm 100 mm
PU 1 1 1 1
For 5 mm bar thicknessPart No. SV 9350.160 9350.180 9350.220 9350.240
For 10 mm bar thicknessPart No. SV 9350.170 9350.190 9350.230 9350.250
Accessories PU
Support railsheight 10 mm, width 45 mm 5 9320.090 9320.090 – – 362
Support railsheight 10 mm, width 54 mm 5 – – 9320.100 9320.100 362
Plug-in connector 1 9320.110 – – – 362
Mounting clip 5 9320.140 9320.140 – – 363
1 2
1 2
194
39
A 57
CB
5
+ 1 2
Material:Polyamide (PA 6.6),30% fiberglass-reinforced. Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
System overview Page 301 Busbar system Page 308 Busbar connection adaptor Page 310 Bus-mounting fuse base Page 311NH on-load isolator Page 311 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
NH bus-mounting on-load isolators, sizes 00, 1, 2 and 3
NH fused isolators, size 00
● Busbar supports 1-pole, 2-pole, 3-pole, 4-pole and 5-pole
(combination of 2-pole and 3-pole)
● 60 mm bar center distance
● By using inserts, the maximum bar accommodation is
reduced from 30 x 10 mm to 12 x 5 mm
System components
Busbar support, 1-pole
Busbar support, 2-pole
Busbar support, 3-poleEnd coverSupport cover
Busbar support, 4-poleEnd cover
Busbar support, 5-pole
Inserts
Busbar cover sections
System covers
Assembly components
Busbar connection adaptor63 A to 1600 A
Conductor connection clamps
Plate clamp
Bus-mounting fuse bases
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
317Rittal Handbook 31/Power Distribution Systems
Busbar Systems Up To 800 A (60 mm)Overview of Rittal PLS
B
2.2
Bus
bar s
yste
ms
up to
800
A/1
600
A (6
0 m
m)
The top-mounting components used in the Rittal PLS are identical to the top-mounting components for the 60 mm flat copper busbar system.
Rittal PLS up to 800 A
PLS end cover
PLS busbar supportsup to 800 A, 3-pole
PLS base tray sections
PLS special busbarsE-Cu 800 A, 300 mm2
PLS busbar connectors
PLS expansion connectors
PLS cover sections
Rittal’s PLS power distribution systems offer space utilization,
safety back-up and contact hazard protection.
● Busbar support suitable for top-mounting
● High static and thermal load capacity, due to the profile
● The large surface area of the copper bars allows optimum
heat dissipation
● Contact hazard protection due to the end cover, base tray
and cover section
Performance in a confined spaceRittal PLS has multiple advantages over flat copper bars:● 60 mm bar center distance
with a load capacity of up to 1600 A
● The busbars are pushed into the one-piece supports and locked into position
● Unrestricted top-mounting of the PLS busbar support with power distribution components. Free positioning of the support means easier planning, greater stability where required, and better space utilization
Rittal PLS up to 1600 A
PLS end cover
PLS busbar supportsup to 1600 A, 3-pole
PLS base tray sections
PLS busbars E-Cu1600 A, 900 mm2
PLS busbar connectors
PLS expansion connectors
PLS cover sections
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 800 A (60 mm)Busbar support
318 Rittal Handbook 31/Power Distribution Systems
B
2.2
Bus
bar S
yste
ms
Up
To 8
00 A
(60
mm
)
Material:Fiberglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature: Maximum 140°C (284°F).Fire protection to UL 94-V0.
Short-circuit protection diagrams,see pages 1124 and 1125.
Technical information,for the calculation of rated currents,see page 1137.
Part No. SV 3000.000 3050.0001) 3078.0002) 3064.000 3066.000Also requiredInsertsfor busbars smaller than 30 x 10 mm � � � � – 319
Accessories PU
End covers 10 3080.000 – – 3084.000 – 319
Support cover 4 3089.000 – – – – 319 1) N/PE support 2) PEN/N/PE support
1 2 3 4 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
End coversFor side contact hazard protection on the busbar support. Simple clip-on mounting.
End cover:for busbar supports
Support coverThe support cover ensures side contact hazard protection from the assembled bus-mounting fuse bases. The build height is the same as the bus-mounting fuse bases, with contact hazard protection cover plate.
Support cover:for busbar supports
For busbar supports PU Part No. SVSV 3000.000 10 3080.000SV 3064.000 10 3084.000
For busbar supports PU Part No. SVSV 3000.000 4 3089.000
30 x 5 447 A 12 3001.000 9.53 x 25.40 (3/8 x 1″) 599 A 24 3012.00025 x 5 384 A 12 3002.000 6.35 x 25.40 (1/4 x 1″) 449 A 12 3013.00020 x 10 497 A 24 3003.000 4.76 x 25.40 (3/16 x 1″) 349 A 12 3014.00020 x 5 319 A 12 3004.000 3.18 x 25.40 (1/8 x 1″) 299 A 12 3015.00016 x 8 397 A 12 3005.000 9.53 x 19.05 (3/8 x 3/4″) 449 A 24 3016.000
16 x 3/4/5 198/225/280 A 12 3006.000 6.35 x 12.70 (1/4 x 1/2″) 249 A 12 3017.00015 x 3/4/5 187/210/260 A 12 3007.000
12 x 10 340 A 24 3008.00012 x 5 210 A 12 3009.000
1) Base rated current per DIN 43 671
BusbarsMade from E-Cu To DIN EN 13 601. Length: 2400 mm/bar.
Busbar connectorsFor connecting busbars, no drilling required.
Note:For technical data and material specifications, see page 360.
Busbar connector E-CuConnector:E-Cu
Dimensionsmm PU Part No. SV
30 x 10 6 3586.00030 x 5 6 3584.00025 x 5 6 3583.00020 x 10 6 3585.00020 x 5 6 3582.00015 x 5 6 3581.00012 x 10 6 3580.10012 x 5 6 3580.000
For busbars
mm
ApplicationPacks
ofPart No.
SVSingle connection
Baying clamp1)
12 x 5 – 15 x 10 � – 3 9350.070
20 x 5 – 30 x 10
� – 3 9320.020– � 3 9320.030
1) From enclosure to enclosure
Busbar cover sectionsContact hazard protection by a full encapsulation of the busbars. May be cut to required length.
Material:Thermally modified hard PVC. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
Note:For single busbar, replace the last digit of the Part no. with a “1”, (i.e. XXXX.000 to XXXX.001).
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 800 A/1600 A (60 mm)Rittal PLS
320 Rittal Handbook 31/Power Distribution Systems
B
2.2
Bus
bar S
yste
ms
Up
To 8
00 A
/160
0 A
(60
mm
) PLS busbar supportsMaterial:Fiberglass-reinforced, thermoplastic polyester (PBT). Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Short-circuit protection diagrams,see page 1125.
Technical information,for the calculation of rated currents,see page 1137.
Busbar supports:PLSSupports:PLS
BA
215
18
13
28
215
36
23
36
175
Ø 6.5Ø 6.5
6060
17560
60
181 Rated current up to 800 A 1600 A
Voltage up to 1000 V~, 50/60 Hz to VDE 0660
Number of poles 3-pole
Bar center distance 60 mm
PU 4 4
Part No. SV 3500.000 3510.000
A B
PLS end coverFor contact hazard protection of the PLS assembly on the sides. Simple clip-on mounting on the PLS busbar support.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PLS busbar connectorsFor connecting the PLS special busbars; no drilling required.
Busbar connector E-Cu:PLSConnector:PLS
A B
50
A
100 - 110
150
B
For PUPart No. SV
For PLS assembly 800 A 1600 A
Single connection 3 3504.000 3514.000 Baying clamp1) 3 3505.000 3515.000
Tightening torque 88 – 133in/lbs
133 – 177in/lbs
1) From enclosure to enclosure (TS8)
AB
PLS expansion connectorsFor thermal and mechanical compensation during connection of PLS special busbars from enclosure to enclosure.
Material:E-Cu
Expansion connector PLS
Note:For a temperature increase of 30 K, the busbars are extended in length by approximately 0.5 mm/m. Therefore, the use of an expansion connector is recommended for busbar systems with lengths in excess of 3 m (118″).
PLS base tray sectionsFor rear contact hazard protection of the PLS assembly.
Base tray sections:PLSCover sections:PLS
Length (L) mm PU
Part No. SVFor PLS assembly
800 A 1600 A
500 2 3502.000 3512.000700 1 3503.000 3513.000
1100 1 3518.000 3519.000Height (H) mm 13.5 24.5
230
L
L
54.5
H
4
5
4
PLS base tray section infillFor rear contact hazard protection when connecting the PLS busbars from enclosure to enclosure.
Material:Thermally modified hard PVC. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
Configuration:Assembly parts
Base tray sections:infill PLS
100
H
PUPart No. SV
For PLS assembly 800 A 1600 A
1 3523.000 3533.000Height (H) mm 13.5 24.5
PLS busbar systemsBusbar systems:PLS
PLS cover sectionsMay be cut to the required length; for clip-on mounting to the PLS base tray section.
MaterialBase tray and cover sections:Thermally modified hard PVC. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
Length (L) mm PU
Part No. SVFor PLS assembly
800 A 1600 A
250 2 3506.000500 2 3507.000700 1 3508.000
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
For 5 – 10 mm bar thicknessPart No. SV 3443.000 3444.000 3442.000 3440.000 3441.000
AccessoriesLaminated copper bars – � � – � 361
1) With ring terminal M102) With neatly crimped wire end ferrule
1 2 3 4 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Clamping area for laminated copper bars● For 5 mm bar thickness● For 10 mm bar thickness
24 x 21 mm 24 x 21 mm
34 x 21 mm 34 x 16 mm
– 65 x 21 mm
Tightening torque● Assembly screw● Terminal screw
133 – 177 in/lbs133 in/lbs
– 88 – 106 in/lbs
– 133 – 177 in/lbs
PU 1 set (of 3) 1 set (of 3) 1 set (of 3)
For 5 – 10 mm bar thicknessPart No. SV 3439.010 3439.000 –
For 10 mm bar thicknessPart No. SV – – 3517.0002)
AccessoriesLaminated copper bars � � � 361
1) Connection of round conductors up to 600 MCM with ring terminal available on request. 2) Only suitable for Rittal PLS 1600 A system.
1 2 3
2 1 3 150
60
54
247
230
110
48
36.5
230
110
85
36.5
1 2
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Plate clampFor busbars 12 x 5 – 30 x 10 mm. Clamping area for laminated copper bars: 34 x 10 mm. Tightening torque: 53 – 70 in/lbs.Material:Sheet steel, zinc-plated, passivated.
Plate clampsConnection clampsClamps
Accessories:Laminated copper bars,see page 361.
55
5540
40 2 PU Part No. SV3 3554.000
System coversFor conductor connection clamps and plate clamps.
Material:ABS Continuous operating temperature: Maximum 80°C (176°F). Fire protection to UL 94-V0.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Multi-functional component adaptor:for 60 mm busbar systems
2 1 3
234
39
54 57
100
68.5
5
54 57
67.5
100
234
53939
54 57
118
234
1 32
39
54 57
100
68.5
2345
4
4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1) Mounting of power circuit-breakers for fixed installation is only possible with ABB mounting bracket (Part No. UXAB 169264 R005). 2) Mounting only possible with support rail.
1 1 1 2 3 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Support rails, height 7.5 mm, width 54 mm 10 – – 3548.000 – 362
Support rails, height 7.5 mm, width 72 mm 10 – – – 3549.000 362
Cover strips, width 54 mm 20 – – 3536.000 – 363
Cover strips, width 72 mm 20 – – – 3537.000 363
Laminated copper bars � � – – 361
1 1 2 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 800 A/1600 A (60 mm)Bus-mounting fuse bases/NEMA style bus-mounting fuse bases
334 Rittal Handbook 31/Power Distribution Systems
B
2.2
Bus
bar S
yste
ms
Up
To 8
00 A
/160
0 A
(60
mm
)
Material:Bus-mounting fuse base:Fiberglass-reinforced, thermoplastic polyester (PBT)(phenocic fuse holder for R fusebases). Continuous operating temperature: Maximum 140°C (284°F), 125°C (257°F) with covers. Fire protection to UL 94-V0.
Contact hazard protection cover: Talcum-reinforced polypro-pylene. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
NEMA style bus-mounting fuse bases
For clamping screw attachment
Type D 02-E 18 (adaptor sleeve) D II-E 27 (adaptor screw) D III-E 33 (adaptor screw)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Identification label support 6 3595.010 3595.010 363
Micro-switch 5 3071.000 3071.000 363
PLS cover 2 3499.070 3499.070 364
Lug terminal connection parts 1 set 3592.020 3592.020 365
Clamp-type terminal connection 1 set 3592.010 3592.010 365
1 2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Part No. SV 3431.000Also requiredBusbar adaptor see below
Accessories PU
Micro-switch 5 3071.000 363 1) 160 A at 4/Ø AWG connection cross-section (4/Ø AWG & connector pieces available on request).
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System components
Busbar Systems Up To 1250 A (100 mm)
343Rittal Handbook 31/Power Distribution Systems
B
2.3
Bus
bar S
yste
ms
Up
To 1
250
A (1
00 m
m)Busbar support
Material:Fiberglass-reinforced, thermoplasticpolyester (PBT). Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Short-circuit protection diagram, see page 1126.
Technical information, for the calculation of rated currents,see page 1137.
Busbar supports:100 mm bar center distanceSupports:100 mm bar center distance
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 342 Busbar system Page 343 Connection clamps Page 344 NH fused isolator Page 349 Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
The busbar support with 185 mm bar center distance is
designed to accommodate 80 x 10 mm bars.
By using inserts, the cross-section of the bar may be
reduced to 60/50 x 10 mm.
System components
Busbar supportup to 1600 A, 3-pole
Insertsfor busbar supports
Busbars E-Cu
Busbar cover sections Plate clamps
Conductor connection clamps
NH fused isolator, size 00Included with the supply: Single or double adaptor for mounting the NH strip on 185 mm bar systems.
NH fused isolators, sizes 1 – 3for direct mounting on 185 mm bar systems.
The special design of the busbar support facilitates seamless top-mounting in the vicinity of the support. The isolator, bar and support are screwed together with a single screw. In addition, the individual modules of the busbar support can be used as single-pole supports.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System components
Busbar Systems Up To 1600 A (185 mm)
351Rittal Handbook 31/Power distribution
Bus
bar S
yste
ms
Up
To 1
600
A (1
85 m
m)
B
2.4Busbar support
Material:Fiberglass-reinforced, thermoplasticpolyester (PBT). Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Note:The base component of the busbar support may also be used as a single-pole support.
Short-circuit protection diagram, see page 1126.
Technical information, for the calculation of rated currents,see page 1137.
Busbar supports:185 mm bar center distanceSupports:185 mm bar center distance
515
24
50.7
495
125
60
185
185
ø6.5
125
145
M12
1 Rated current up to 1600 A
Voltage up to 1000 V~, 50/60 Hz to VDE 0660
Number of poles 3-pole
Bar center distance 185 mm
Maximum bar accommodationwithout inserts 80 x 10 mm
Tightening torque● Assembly screw ● Bar attachment screw
27 – 44 in/lbs354 in/lbs
PU 2
Part No. SV 3052.000
1
4 2 3
185
185
Busbar coversContact hazard protection by full coverage of the busbars. May be cut to required length.
Material:Thermally modified hard PVC. Continuous operating temperature: Maximum 100°C (212°F). Fire protection to UL 94-V0.
Busbars:CoversCovers:for busbars
20.6
70.6
4 Forbusbars
mmPU Part No. SV
40 – 60 x 10 10at 1 m 3085.000
InsertsFor SV 3052.000To adapt bar dimensions50 – 60 x 10 mm.
BusbarsMade from E-Cu To DIN EN 13 601 Length: 2400 mm/bar
Inserts:for busbar supports
2
3
Rated current
Busbar dimensions
mm
Inserts1) Busbars2)
Part No. SV Part No. SV
1000 A 50 x 10 3074.000 3588.0001250 A 60 x 10 3075.000 3589.0001600 A 80 x 10 – 3590.000
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2/Ø – 350 MCM 22.5 x 20 106 – 133 44 66 30.5 15 3459.5001) Wire end ferrules should be used with fine wire conductors.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar Systems Up To 2500 A/3000 A (150 mm)Overview
B
2.5
Bus
bar S
yste
ms
Up
To 2
500
A/3
000
A (1
50 m
m)
Bar systems with 150 mm bar center distance are suitable for
power transmission and distribution.
The maximum bar accommodation of the busbar supports:
80 x 10 mm or 100 x 10 mm.
System components
Busbar supportup to 2500 A, 2 x 3-pole
Spacing piecesto reduce the bar cross-section in 10 mm increments
Busbars E-Cu
Connection plates
Bar insulation
Busbar supportup to 3000 A, 2 x 3-pole
Spacing piecesto reduce the bar cross-section in 10 mm increments
Commercially availablebusbars E-Cu Cross-sections: 100 x 10 mm
Connection plates
Bar insulation
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System components
Busbar Systems Up To 2500 A/3000 A (150 mm)
355Rittal Handbook 31/Power Distribution Systems
B
2.5
Bus
bar S
yste
ms
Up
To 2
500
A/3
000
A (1
50 m
m)Busbar support
Material:Fiberglass-reinforced, thermoplasticpolyester (PBT). Continuous operating temperature: Maximum 140°C (284°F). Fire protection to UL 94-V0.
Short-circuit protection diagram, see page 1126.
Technical information, for the calculation of rated currents,see page 1137.
Busbar supports:150 mm bar center distanceSupports:150 mm bar center distance
Spacing piecesFor SV 3055.000/SV 3057.000 To reduce the bar dimensions in 10 mm increments. Also suitable for stepped busbar assemblies. Spacing pieces:for busbar support (150 mm)
2 PU Part No. SV12 3056.000
BusbarsMade from E-Cu To DIN EN 13 601 Length: 2400 mm/bar
3 Dimensions PU Part No. SV60 x 10 mm 3 3589.00080 x 10 mm 3 3590.000
System overview Page 354 Connection plates Page 356 Bar insulation Page 356
Busbar systems:150 mm bar center distance
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Note:One connection plate per terminal connection is omitted.
Connection plates:for busbar system (150 mm)
Connection PU Part No. SV
2 x ring terminals M10up to 500 MCM 3 sets 3061.0001)
T-head screws: 1) M10 x 120 mm
3
Bar insulationFor SV 3055.000 and SV 3057.000For cable routing, plug-type
Bar insulation:for 150 mm bar systems
4 PU Part No. SV9 3060.000
System overview Page 354 Busbar system Page 355
4
3 2 1
Busbar systems:150 mm bar center distance
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Lug terminal connection parts 1 set – – – – – 3414.000 3414.000 3651) 160 A with 4/Ø AWG connection cross-section (4/Ø AWG connector pieces available on request).
1 2 3 2 3 4 5
Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Lug terminal connection parts 1 set 3499.000 3499.000 3499.000 3499.000 365
Clamp-type terminal connection 1 set 3499.010 3499.010 3499.010 3499.010 365
1
2
3
Accessories Page 360
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
– 177 in/lbs 3 9320.0301) From enclosure to enclosure
12
3
BusbarsMade from E-Cu To DIN EN 13 601. Length: 2400 mm/bar
Busbars:E-CuCopper bars:E-Cu
Dimensionsmm
Weight per barkg (lb) PU Part No. SV
12 x 5 1.28 (2.8) 6 3580.00015 x 5 1.60 (3.5) 6 3581.00020 x 5 2.14 (4.7) 6 3582.00025 x 5 2.67 (5.9) 6 3583.00030 x 5 3.20 (7.1) 6 3584.00012 x 10 2.56 (5.6) 6 3580.10015 x 10 3.20 (7.1) 6 3581.10020 x 10 4.27 (9.4) 6 3585.00030 x 10 6.41 (14.1) 6 3586.00040 x 10 8.55 (18.8) 3 3587.00050 x 10 10.68 (23.5) 3 3588.00060 x 10 12.82 (28.3) 3 3589.00080 x 10 17.09 (37.7) 3 3590.000
Base isolatorsFor configuring busbar systems with any given bar center distances and for assembling PE or PEN bars.
Material:Duroplastic polyester (UP resin). Continuous operating temperature: Maximum 135°C (275°F).
Base isolators
Ø C
A
BB
D
M10
Rated operating voltage 1 kV 1 kV
Tensile strength 2698 lbs 2923 lbs
Torsional strength 664 in/lbs 797 in/lbs
Bending strength 1349 lbs 1349 lbs
Tightening torque 354 in/lbs 354 in/lbs
A mm 40 50
B mm 15 19
Ø C mm 32 42
D mm SW 36 SW 50
PU 6 6
Part No. SV 3031.000 3032.000
Busbar systems:AccessoriesSystem accessores:for busbar systems
Note: For single busbar, replace the last digit of the Part no. with a “1”, (i.e. XXXX.000 to XXXX.001).
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Insulation: ● High-strength vinyl compound● Expansion 370 %● Temperature range:
–30°C (86°F) to +105°C (221°F)● Flame retardant version to UL 94-V0 ● Dielectric strength: 20 kV/mm
Short-circuit protection diagram, see page 1127.
Note: Contact your local Rittal representative for information regarding the local Flexibar made-to-order program.
Laminated copper barsCopper bars:E-Cu
Construction1) mm
In at
50 K2)
In at
30 K2)
In at
10 K2)PU Part No. SV Part No. SV
Tinned Copper
6 x 9.0 x 0.8 250 A 220 A 120 A 1 3565.000 3565.9026 x 13.0 x 0.5 200 A 150 A 110 A 1 3566.000 3566.9024 x 15.5 x 0.8 300 A 210 A 140 A 1 3567.000 3567.9026 x 15.5 x 0.8 350 A 290 A 170 A 1 3568.000 3568.902
10 x 15.5 x 0.8 450 A 350 A 190 A 1 3569.000 3569.9025 x 20.0 x 1.0 400 A 300 A 180 A 1 3570.000 3570.9035 x 24.0 x 1.0 450 A 370 A 230 A 1 3571.000 3571.903
10 x 24.0 x 1.0 800 A 600 A 340 A 1 3572.000 3572.9035 x 32.0 x 1.0 550 A 470 A 280 A 1 3573.000 3573.903
10 x 32.0 x 1.0 1000 A 800 A 460 A 1 3574.000 3574.9035 x 40.0 x 1.0 800 A 600 A 340 A 1 3575.000 3575.903
10 x 40.0 x 1.0 1200 A 950 A 500 A 1 3576.000 3576.9035 x 50.0 x 1.0 900 A 700 A 400 A 1 3577.000 3577.903
10 x 50.0 x 1.0 1400 A 1000 A 600 A 1 3578.000 3578.90310 x 63.0 x 1.0 1600 A 1240 A 715 A 1 3579.000 3579.903
1) Number of lamina x lamina width x lamina thickness2) The sum total of the ambient temperature and the temperature increase produces the total conductor
temperature of the laminated flat copper bar. Example: SV 3565.000 loaded with 220 A, i.e. the temperature increases by 30 K. At an ambient temperature of 35°C (95°F),this produces a total conductor temperature of 35°C (95°F)+ 30 K = 65°C (149°F).
Universal supportFor the attachment of laminated copper bars from 20 x 5 to 63 x 10 mm.
Material:Fiberglass-reinforced, thermoplastic polyester (PBT). Fire protection corresponding to UL 94-V0.
Configuration:Screws and “U” nuts for mounting on PS/TS mounting rails.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Component support 333 7.5 54 10 3548.0007.5 72 10 3549.000
1
2
3
1
1
1
2
1
Plug-in connectorFor mounting the AS-interface load feeder modulewith matching support type 3RK1 901-3CA00, Siemens brand, on the Mini-PLS component adaptor and multi-functional component adaptor.
Plug-in connector:for component adaptor
For See page PU Part No. SVMini-PLS component adaptor (width 45/54 mm) 304 + 306 1 9623.100
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
PLS coverThe PLS cover guarantees contact hazard protection for special busbars when using NH equipment on Rittal PLS 800 A/1600 A.Attached by clipping onto the PLS base tray section.
Material:SV 3099.000/SV 3499.070 ABS
SV 3499.040/SV 3499.050 Thermally modified hard PVC.
For See page PU Part No. SVNH bus-mounting on-load isolators, size 00 338 1 3408.000
Mounting setFor mounting the NH on-load isolator on 35 mm support rails to DIN EN 60 715 (7.5 mm/15 mm high).
Mounting set:for NH isolators, size 000
For See page PU Part No. SVNH on-load isolators, size 000 358 1 3432.000
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Lug terminalconnection partsFor NH isolators, sizes 1 to 3For connecting laminated copper bars and round conductors up to 3/Ø AWG. Tightening torque: Terminal screw 1) 71 in/lbs 2) 133 in/lbs
Lug terminal connection parts:for NH isolators, sizes 1 to 3Connection parts:for NH isolators, sizes 1 to 3
ForNH isolators Clamping area PU Part No. SV
Size 1 16 x 12 mm 1 set 3414.0001)
Size 2, 3 21 x 11 mm 1 set 3499.0002)
Clamp-typeterminal connectionFor NH isolators, sizes 2 and 3For the connection of round conductors up to 500 MCM. Tightening torque: Terminal screw 133 in/lbs.
Clamp-type terminal connection:for NH isolators, sizes 2 and 3Terminal connection:for NH isolators, sizes 2 and 3
PU Part No. SV1 set 3499.010
Lug terminalconnection partsFor NH fused isolators size 00For connecting laminated copper bars and round conductors 14-3 AWG.Clamping area: 16 x 10 mm. Tightening torque: Terminal screw 35 in/lbs.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Rittal Maxi-PLSOverview, Rittal SV-TS8 and Maxi-PLS
B
2.8
Ritt
al M
axi-P
LS
SV-TS8 system components
TS system chassis with mounting flange, 23 x 73 mm (0.9 x 2.9″)
System support rails
Maxi-PLS busbar support
System attachment Busbar support
Busbar support, suitable for top mounting
End supports
The futuristic modular SV-TS8 enclosures are fully prepared. The enclosure frame is fully fitted with a three-piece gland plate, rear wall, roof and door or partial doors. System chassis without mounting panels to accommodate the end supports and system support rails for the power circuit-breakers are ready to install.
Standardized Maxi-PLS busbars with smart fastening technology.Due to the system technology and customized hole pattern, installation of Maxi-PLS supports and bars is precise, simple and fast.With the aid of sliding blocks or studs, the four attachment levels of the Maxi-PLS busbars permit infinitely variable attachment and contacting of round conductors, laminated flat copper and Maxi-PLS connection brackets and connection kits.
System packages are available for all commercially available power circuit-breakers. Maxi-PLS busbars, in conjunction with the isolator chassis, U contact maker and connection brackets, form the heart of the modular system for connecting air circuit-breakers up to 3200 A with standard components.
The connection kits are tailored to the respective power circuit-breakers.
Type testing toEN 60 439-1/IEC 60 439-1 Special testing under accidental arcing conditions to EN 60 439-1, supplement 2/IEC 1641
SV-TS8 and Maxi-PLS – the ideal combination for
low-voltage distributors and switchgear in the heavy
current range. The system is assembled without any form
of machining (such as sawing, drilling, bending, etc.).
As a result, this future-oriented, fully modular system is
easy and safe to assemble.
Maxi-PLSBusbar systems:Maxi-PLS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Rittal Maxi-PLSOverview, Rittal SV-TS8 and Maxi-PLS
Isolator chassis U contact makers E-Cu Connection bracket E-Cu
Maxi-PLS connector kits
Connector kits top/bottom Stacking insulator
System concept ● All manual machining is
eliminated● Type testing of the system
technology● Compact busbar with four
attachment levels; bar length tailored to the enclosure dimensions
● Standardized contact hazard protection
System benefits ● Increased productivity (easier
project planning, no manual production of busbar connections and connection points, faster assembly)
● Compact configuration, easy access to all connection points
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Rittal Maxi-PLS Up To 2000 AConnection kits (3-pole)
368 Rittal Handbook 31/Power Distribution Systems
B
2.8
Ritt
al M
axi-P
LS U
p To
200
0 A
For installation in 600 mm (23.6″) deep and 2000 mm (78.7″) high enclosures. Recom-mended enclosure width 600 mm (23.6″).
Correct selection should be made according to the following criteria:
● Make, size● Rated current Ie ● Switch version either static
installation or rack-mounted● Position of the power circuit-
breaker: VT = In door cutout HT = Behind the door
Connection kit, top
Connection kit, bottom
Connection bracket
Isolator chassis
U contact maker
Note:Technical modifications reserved. Connection kits for other enclosure sizes or 4-pole systems available on request.
Delivery time: Extended delivery times.
1
2
3
4
5
Siemens 3WN6 Part No. SV Page
Rated operating current Ie 630 A 800 A 1000 A 1250 A 1600 A 2000 A
Stacking insulator 6 9660.200 9660.200 9660.200 9660.200 9660.200 9660.200 405 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
345
12121212
345
Connection kits Maxi-PLS
System overview Page 366 System components Page 376 Connection components Page 377 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
3
4
5
VT HT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 System components Page 376 Connection components Page 377 SV-TS8 enclosures Page 392 Accessories Page 401
Connection kits Maxi-PLS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9)
Accessories PU
Connection bracket 1 set 9640.440 9640.450 377
Isolator chassis 1 set 9640.020 9640.020 377
U contact maker 3 9640.170 9640.170 377
Stacking insulator 6 9660.200 9660.200 405 1) For installation in 800 mm (31.5″) deep enclosures.
2222
345
2222
345
Connection kits Maxi-PLS:for coupling sets
1
2
3
3
4
4
5
5 VT HT
System overview Page 366 Connection kits, top Page 368 System components Page 376 Connection components Page 377 SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9)
Accessories PU
Connection bracket 1 set 9640.440 9640.450 377
Isolator chassis 1 set 9640.020 9640.020 377
U contact maker 3 9640.170 9640.170 377
Stacking insulator 6 9660.200 9660.200 405
2222
345
2222
345
2222
345
System overview Page 366 Connection kits, top Page 368 System components Page 376 Connection components Page 377SV-TS8 enclosures Page 392 Accessories Page 401
Connection kits Maxi-PLS:for coupling sets
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
U contact maker 3 9640.170 9640.170 9640.170 9640.170 9640.170 9640.170 377 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
Connection kits Maxi-PLS:for rear section
System overview Page 366 System components Page 376 Connection components Page 377 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
4
VT HT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) top/bottom 16/10 (35.3/22) – 31/19.5 (68.3/43) 31/19.5 (68.3/43) 47/29 (103.6/63.9)
Accessories PU
Connection bracket 1 set 9640.430 – 9640.440 9640.440 9640.450 377
U contact maker 3 9640.170 – 9640.170 9640.170 9640.170 377 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
12121212
34
System overview Page 366 System components Page 376 Connection components Page 377 SV-TS8 enclosures Page 392 Accessories Page 401
Connection kits Maxi-PLS:for rear section
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 Connection kits, top Page 368 System components Page 376 Connection components Page 377SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Cover section for clip-on mounting on the Maxi-PLS busbars, length 1000 mm. – 5 9640.050 – 5 9640.050
Longitudinal connector E-Cu for simple baying connection of the Maxi-PLS busbars. Including sliding blocks, bolts, washers and nuts. 5.2 (11.5) 3 9640.190 5.2 (11.5)
1.7 (3.7)3
+ 19640.1909649.190
End cover for clip-on mounting on the end surface of Maxi-PLS busbars. – 6 9640.060 – 6
+ 29640.0609649.060
1) A = Cable connection system with end support B = Left-hand or right-hand end enclosure in a switchgear installationC = Bayed enclosure with panels bayed on the left and right
Longitudinal connector Maxi-PLSConnector:Maxi-PLSEnd support for Maxi-PLS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Isolator chassis for isolated routing of the connection brackets. Material: PA 6.6, black, including assembly parts.
Bar center distance mm For connection bracket width mm
100 60 – 1 set 9640.020 – 1 set 9649.020150 60 – 1 set 9650.020 – – –
150 100 – 1 set 9650.030 – – –
U contact maker E-Cu for contacting the connection brackets to the Maxi-PLS busbars. Including sliding blocks.
Width 60 mm 2.4 (5.3) 3 9640.170 2.4 (5.3)0.8 (1.8)
3+1
9640.1709649.170
Width 100 mm 4.0 (8.8) 3 9640.180 – – –
Connection clamp for the connection of round conductors 4/Ø AWG to 600 MCM (multi-wire and sector). Suitable for retro-fitting on Maxi-PLS busbars. Including assembly parts.
– 3 9640.320 – 3 9640.320Connection plates for the connection of laminated flat copper bars. Including assembly parts.
Maximum clamping area
2 x 10 x 32 x 1 mm – 3 9640.330 – 3 9640.3302 x 10 x 63 x 1 mm – 3 9640.340 – 3 9640.3402 x 10 x 100 x 1 mm – 3 9640.350 – 3 9640.350
Terminal stud for connecting cables with ring terminals. Including sliding blocks.
ThreadM12 Length 30 mm – 3 9640.370 – 3 9640.370M16 Length 30 mm – 3 9640.380 – 3 9640.380
Sliding blocks for sliding into the Maxi-PLS busbar section at the sides.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Stacking insulator 6 9660.200 9660.200 9660.200 9660.200 9660.200 9660.200 405 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
345
12121212
345
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
3
4
5
VT HT
Connector kits Maxi-PLS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) top/bottom 41/29 (90.4/63.9) 67/50 (147.7/110.3) 67/50 (147.7/110.3)
Accessories PU
Connection bracket 1 set 9650.420 9650.480 9650.480 391
Isolator chassis 1 set 9650.020 9650.030 9650.030 391
U contact maker 3 9650.170 9650.180 9650.180 391
Stacking insulator 6 9660.200 9660.200 9660.200 405 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
345
12121212
345
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
3
4
5
VT HT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9) 50 (110.2) 50 (110.2)
Accessories PU
Connection bracket 1 set 9650.410 9650.420 9650.480 9650.480 391
Isolator chassis 1 set 9650.020 9650.020 9650.030 9650.030 391
U contact maker 3 9650.170 9650.170 9650.180 9650.180 391
Stacking insulator 6 9660.200 9660.200 9660.200 9660.200 405 1) Installation of the power circuit-breaker is also possible in 800 mm (31.5″) wide enclosures. 2) For installation in 800 mm (31.5″) deep enclosures.
2222
345
2222
345
System overview Page 366 Connection kits, top Page 378 System components Page 390 Connection components Page 391SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
3
4
4
5
5 VT HT
Connection kits Maxi-PLS:for coupling sets
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9) 32 (70.5) 32 (70.5) 50 (110.2)
Accessories PU
Connection bracket 1 set 9650.410 9650.420 9650.470 9650.470 9650.480 391
Isolator chassis 1 set 9650.020 9650.020 9650.030 9650.030 9650.030 391
U contact maker 3 9650.170 9650.170 9650.180 9650.180 9650.180 391
Stacking insulator 6 9660.200 9660.200 9660.200 9660.200 9660.200 405 1) Installation of the power circuit-breaker is also possible in 800 mm (31.5″) wide enclosures.
2222
345
System overview Page 366 Connection kits, top Page 378 System components Page 390 Connection components Page 391SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
U contact maker 3 9650.170 9650.170 9650.170 9650.170 9650.170 9650.170 391 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
4
VT HT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) top/bottom 16/10 (35.3/22) – 31/19.5 (68.3/43) 31/19.5 (68.3/43) 47/29 (103.6/63.9)
Accessories PU
Connection bracket 1 set 9650.400 – 9650.410 9650.410 9650.420 391
U contact maker 3 9650.170 – 9650.170 9650.170 9650.170 391 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
12121212
34
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) top/bottom 41/29 (90.4/63.9) 67/50 (147.7/110.3) 67/50 (147.7/110.3)
Accessories PU
Connection bracket 1 set 9650.420 9650.480 9650.480 391
U contact maker 3 9650.170 9650.180 9650.180 391 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
1
2
3
4
VT HT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) top/bottom 48/32 (105.9/70.5) 48/32 (105.9/70.5) 67/50 (147.7/110.3)
Accessories PU
Connection bracket 1 set 9650.470 9650.470 9650.480 391
U contact maker 3 9650.180 9650.180 9650.180 391 1) For installation in 800 mm (31.5″) deep enclosures.
12121212
34
12121212
34
12121212
34
System overview Page 366 System components Page 390 Connection components Page 391 SV-TS8 enclosures Page 392 Accessories Page 401
Connection kits Maxi-PLS:for rear section
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9) 50 (110.2) 50 (110.2)
Accessories PU
Connection bracket 1 set 9650.410 9650.420 9650.480 9650.480 391
Isolator chassis 1 set 9650.020 9650.020 9650.030 9650.030 391
U contact maker 3 9650.170 9650.170 9650.180 9650.180 391 1) Installation of the power circuit-breaker is also possible in 800 mm (31.5″) wide enclosures. 2) For installation in 800 mm (31.5″) deep enclosures.
2222
345
2222
345
System overview Page 366 Connection kits, top Page 378 System components Page 390 Connection components Page 391SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Approximate weight in kg (lb) 19.5 (43.0) 29 (63.9) 32 (70.5) 32 (70.5) 50 (110.2)
Accessories PU
Connection bracket 1 set 9650.410 9650.420 9650.470 9650.470 9650.480 391
Isolator chassis 1 set 9650.020 9650.020 9650.030 9650.030 9650.030 391
U contact maker 3 9650.170 9650.170 9650.180 9650.180 9650.180 391 1) Installation of the power circuit-breaker is also possible in 800 mm (31.5″) wide enclosures. 2) For installation in 800 mm (31.5″) deep enclosures.
2222
345
System overview Page 366 Connection kits, top Page 378 System components Page 390 Connection components Page 391SV-TS8 enclosures Page 392 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Cover section for clip-on mounting on the Maxi-PLS busbars, length 1000 mm. – 5 9650.050 – 5 9650.050
Longitudinal connector E-Cu for simple baying connection of the Maxi-PLS busbars. Including sliding blocks, bolts, washers and nuts. 7.0 (15.4) 3 9650.190 7.0 (15.4)
2.4 (5.3)31
9650.190+ 9659.190
End cover for clip-on mounting on the end surface of Maxi-PLS busbars. – 6 9650.060 – 6
29650.060
+ 9659.060Stabilizer to increase short-circuit resistance (Icw up to 120 kA). – 42) 9650.140 – – –
1) A = Cable connection system with end support B = Left-hand or right-hand end enclosure in a switchgear installationC = Bayed enclosure with panels bayed on the left and right
2) Modules for two complete stabilizers
1
2
3
4
5
6
7
Special busbars:Maxi-PLSCover sections:Maxi-PLSEnd cover:Maxi-PLSLongitudinal connector Maxi-PLSConnector:Maxi-PLSEnd support for Maxi-PLS
Material:Busbar support, end support, end cover: PA 6.6System attachment: Stainless steelCover section: Hard PVC.
Detailed drawing, see page 1138.
Note: Tin and silver-plating also available, contact your local Rittal representative for more information.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 Connection kits Page 378 System components Page 390 SV-TS8 enclosures Page 392 Accessories Page 401
5
4
6
3
1
2
7
8
L
Maxi-PLS connection components3-pole 4-pole
Approx. weight(kg (lb)/pack) PU Part No.
SVApprox. weight(kg (lb)/pack) PU Part No.
SVConnection bracket E-Cu Transition from the main busbar system to the connection kits. For enclosure depth mm (inches) Width mm Number of brackets per phase
600 (23.6) 60 1 6 (13.2) 1 set 9650.400 – – –
600 (23.6) 60 2 11 (24.3) 1 set 9650.410 – – –
600 (23.6) 60 3 17 (37.5) 1 set 9650.420 – – –
800 (31.5) 60 1 8 (17.6) 1 set 9650.430 11 (24.3) 1 set 9659.400800 (31.5) 60 2 15 (33.1) 1 set 9650.440 20 (44.1) 1 set 9659.410800 (31.5) 60 3 22 (48.5) 1 set 9650.450 30 (66.1) 1 set 9659.420600 (23.6) 100 1 9 (19.8) 1 set 9650.460 – – –
600 (23.6) 100 2 18 (39.7) 1 set 9650.470 – – –
600 (23.6) 100 3 26 (57.3) 1 set 9650.480 – – –
800 (31.5) 100 1 13 (28.7) 1 set 9650.490 18 (39.7) 1 set 9659.460800 (31.5) 100 2 24 (52.9) 1 set 9650.500 32 (70.5) 1 set 9659.470800 (31.5) 100 3 36 (79.4) 1 set 9650.510 48 (105.8) 1 set 9659.480Isolator chassis for isolated routing of the connection brackets. Material: PA 6.6, black, including assembly parts.
Bar center distance mm For connection bracket width mm
150 60 – 1 set 9650.020 – 1 set 9659.020150 100 – 1 set 9650.030 – 1 set 9659.030U contact maker E-Cu for contacting the connection brackets to the Maxi-PLS busbars. Including sliding blocks.
Width 60 mm 3.4 (7.5) 3 9650.170 3.4 (7.5)1.2 (2.6)
31
9650.170+ 9659.170
Width 100 mm 5.7 (12.6) 3 9650.180 5.7 (12.6)1.9 (4.2)
31
9650.180+ 9659.180
Connection clamp for the connection of round conductors 4/Ø AWG – 600 MCM (multi-wire and sector). Suitable for retro-fitting on Maxi-PLS busbars. Including assembly parts.
– 3 9650.320 – 3 9650.320Connection plates for the connection of laminated flat copper bars. Including assembly parts.
Maximum clamping area
2 x 10 x 32 x 1 mm – 3 9650.330 – 3 9650.3302 x 10 x 63 x 1 mm – 3 9650.340 – 3 9650.3402 x 10 x 100 x 1 mm – 3 9650.350 – 3 9650.350
Terminal stud for connecting cables with ring terminals. Including sliding blocks.
ThreadM12 Length 32 mm – 3 9650.370 – 3 9650.370M16 Length 32 mm – 3 9650.380 – 3 9650.380
Sliding blocks for sliding into the Maxi-PLS busbar section at the sides.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Pre-assembled for direct installation of power circuit-breakers
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure framewith fitted system chassis without mounting flange for Maxi-PLS end support attachment and fitted system support rails for power circuit-breaker attachment; door(s), roof, rear wall, gland plates (three-piece).
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) Cable entry grommets, see page 965. 2) In exchange for the standard TS roof. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Pre-assembled for direct installation of power circuit-breakers
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure framewith fitted system chassis without mounting flange for Maxi-PLS end support attachment and fitted system support rails for power circuit-breaker attachment;door(s), roof, rear wall, gland plates (three-piece).
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) Cable entry grommets, see page 965. 2) In exchange for the standard TS roof. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure frame, door, roof, rear wall, gland plates (three-piece), TS system chassis with mounting flanges.
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) Without mounting panel.2) Cable entry grommets, see page 965. 3) In exchange for the standard TS roof. 4) Only used when mounting the Maxi-PLS system in the rear section. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
1
2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure frame, door(s), roof, rear wall, gland plates (three-piece), TS system chassis with mounting flanges.
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888. 1) Without mounting panel. 2) Cable entry grommets, see page 965. 3) In exchange for the standard TS roof. 4) Only used when mounting the Maxi-PLS system in the rear section. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
1
2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure framewith fitted support rails to accommodate the T-bar support; Door, roof, rear wall,gland plates (three-piece).
Detailed drawing, see page 1140.
Technical information, see page 1144.
System overview Pag 366 System components Pages 376/390 Connection components Pages 377/391 Accessories Page 401 C rails Page 928
T
H
B
For Maxi-PLS PU3-pole
Pages2000 A/3200 A
For NH fused isolators brand ABB SlimLine Jean Müller SASIL
Height (H) in mm (inches) 2000 (78.7) 2000 (78.7) 2000 (78.7) 2000 (78.7)
Width (B) in mm (inches) 1000 (39.4) 1200 (47.2) 1000 (39.4) 1200 (47.2)
Depth (T) in mm (inches) 600 (23.6) 600 (23.6) 600 (23.6) 600 (23.6)
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) In exchange for the standard TS roof. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure framewith fitted support rails to accommodate the T-bar support; door, roof, rear wall,gland plates (three-piece).
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888. 1) In exchange for the standard TS roof. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
System overview Page 366 Connection kits for coupling sets Pages 370/382 System components Pages 376/390Connection components Page 377/391 Accessories Page 401
Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga).
Finish:Enclosure frame: Dipcoat-primedDoor, roof and rear wall: Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated.
Configuration:Enclosure framewith fitted system support rails for power circuit-breaker attachment;door, roof, rear wall,gland plates (three-piece).
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) 2 packs required per system configuration. 2) 1 pack required per system configuration. 3) In exchange for the standard TS roof. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Rittal Maxi-PLS SV-TS8 EnclosuresSystem components for coupling sets
400 Rittal Handbook 31/Power Distribution Systems
B
2.8
Ritt
al M
axi-P
LS S
V-TS
8 En
clos
ures
Coupling sets VerticalFor installation in 600/800 mm (23.6/31.5″) deep SV-TS8 enclosures for coupling sets.
Coupling sets are selected according to the rated current Ie of the primary busbars to be coupled:● Coupling set 2000 A:
Ie ≤ 2000 A● Coupling set 3200 A:
Ie 2000 A ≤ 3200 A
Configuration:3-pole3 Maxi-PLS busbars E-Cu, 1 set of connection brackets E-Cu, top (L1 – L3),1 set of connection brackets E-Cu, bottom (L1 – L3),assembly parts
4-pole4 Maxi-PLS busbars E-Cu, 1 set of connection brackets E-Cu, top(L1 – L3, N),1 set of connection brackets E-Cu, bottom(L1 – L3, N),assembly parts
Coupling sets Maxi-PLS
For Maxi-PLSin the roof section
3-pole 4-pole Pages
2000 A 3200 A 2000 A 3200 A
Approximate weight in kg (lb) 98 (216.1) 152 (335.1) 130 (286.6) 202 (445.3)
PU 1 set 1 set 1 set 1 set
Part No. SV 9660.320 9660.370 9649.700 9659.700Also required
Sliding blocks (PU 15) 9640.9801) 9650.9901) 377/3911) Quantity required per system configuration: 24 2) Quantity required per system configuration: 32
System attachmentFor vertical coupling setFor attaching the busbar supports – see pages 376/390 – and coupling sets to the side TS frame section.
Material:Stainless steel
ForMaxi-PLS coupling section
3-pole 4-pole
2000 A 3200 A 2000 A 3200 A
Bar center distance mm 100 150 100 150
PU 2 2 2 2
Part No. SV 9640.070 9650.070 9649.070 9659.070
System overview Page 366 Connection kits for coupling sets Pages 370/382 System components Pages 376/390Connection components Pages 377/391 SV-TS8 enclosures Page 399 Accessories Page 401
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
For use in power circuit breaker incoming/outgoing feeder panels with a minimum depth of 600 mm (23.6″). The removable mounting panel may be used for the configuration of fuses, power circuit-breakers and switchgear.
Material:Side parts, center parts: Sheet steel, painted in RAL 7035 (light gray)Mounting panel: Sheet steel, zinc-plated, passivatedFront panel: Aluminium, anodized
Configuration:2 side parts,2 center parts,connector parts,mounting panel,optional front panel
Mounting panel
Side parts
Center parts
Note:Please observe the manufacturer-specific data regarding the arcing space of power circuit-breakers.
Version PU For enclosure width 600 mm (23.6″) For enclosure width 800 mm (31.5″) Page
Interior dimensions, clearance width in mm (inches)
Height 263 (10.4) 263 (10.4)
Width 432 (17.0) 632 (24.9)
Depth 245.5 (9.7) 245.5 (9.7)
Mounting panelHeight 250 (9.8) 250 (9.8)
Width 420 (16.5) 620 (24.4)
Without front panelPart No. SV 1 9660.700 9660.710
With front panelPart No. SV 1 9660.720 9660.730
With front panel, horizontally hingedPart No. SV 1 9660.740 9660.750
With front panel, vertically hingedPart No. SV 1 9660.760 9660.770
Also requiredMounting bracket 24 9660.0901) 9660.0901) 404
1) 4 mounting brackets are required to attach a device module.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1-doorPart No. SV 1 set 9660.280 9660.380 9660.780 9660.880
3-doorPart No. SV 1 set 9660.2901) 9660.3901) 9660.790 9660.890
Also requiredMounting bracket 24 9660.0902) 9660.0902) 9660.0902) 9660.0902) 404
1) Including trim panel 2) 12 mounting brackets are required to attach the contact hazard protection cover plates.
Part No. SV Width mmHeight in mm
Top Middle Bottom Trim panel
9660.280 506 204 656 721 –
9660.290 506 247 567 567 20
9660.380 706 204 656 721 –
9660.390 706 247 567 567 20
9660.780 506 526 656 721 –
9660.790 506 567 567 567 –
9660.880 706 526 656 721 –
9660.890 706 567 567 567 –
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
For SV-TS8 enclosures with Rittal NH fused isolatorsTo cover NH fused isolators in the rear enclosure area so that they are safe from finger-contact (IP 2X).
Material:Sheet steel, painted
Color:RAL 7035 (light gray)
Configuration:3 front covers,2 depth covers,2 side covers,connector parts.
Note:SV-TS8 enclosures,see pages 394/395. NH fused isolators, see page 353.
Without use of longitudinal connectors 500 (19.7) 700 (27.6) 900 (35.4) 1100 (43.3)
With use of longitudinal connectors 400 (15.7) 600 (23.6) 800 (31.5) 1000 (39.4)
Part No. SV 1 set 9660.460 9660.470 9660.480 9660.490Also requiredMounting bracket 24 9660.0902) 9660.0902) 9660.0902) 9660.0902) 404
AccessoriesCover panelfor NH isolators
Size 00 4 9660.180 9660.180 9660.180 9660.180 404
Size 1 – 3 4 9660.190 9660.190 9660.190 9660.190 404 1) When using the top-mounted busbars SV 9640.160/SV 9650.160, see pages 376/390.
Longitudinal connectors SV 9640.190/SV 9650.190 for Maxi-PLS busbars, see pages 376/390. 2) 12 mounting brackets are required to attach the contact hazard protection cover plates.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Note:Only suitable for use in conjunction with three-door enclosures.
Cover attachment Maxi-PLS
20
8
30
PU Part No. SV8 9660.680
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
To order roof plates in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Roof platesWith pressure relief functionIn exchange for the standard SV-TS roof. Roof plates with pressure relief function to IEC 60 439-1, supplement 2 (special test): Procedure for testing under accidental arc conditions.
Material:Sheet steel, painted .
Color:RAL 7035 (light gray)
Roof plates:Maxi-PLS with pressure relief function
To order roof plates in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
3-pole 600 (23.6) 100 1 set 9640.620 9640.6303-pole – 185 1 set 9640.640 9640.6504-pole 600 (23.6) 100 1 set 9649.600 9649.610
3200 A
3-pole 600 (23.6) 150 1 set 9650.620 9650.6303-pole – 185 1 set 9650.640 9650.6504-pole 800 (31.5) 150 1 set 9659.600 9659.610
Divider panelFor side shielding from neighboring panels. In conjunction with the busbar gland and the divider panel modules, as a preventive measure to prevent arcing.
For TS enclosures with Maxi-PLS busbarsin the roof section
For TS enclosures with Maxi-PLS busbarsin the rear section
Material:Sheet steel, 1.5 mm (16 ga), zinc-plated, passivated.
Configuration:Assembly parts.
Divider panel:Maxi-PLS
1897
B2B1 B113
8
1897
1 2 B = Width
For TS enclosures in mm (inches)Part No.
SVHeightWidth (B)
Depth PUB1 B2
2000 (78.7)
502(19.8)
418(16.5)
600 (23.6) 1 9660.620
2000 (78.7)
702(27.6)
618(24.3)
800 (31.5) 1 9659.590
For TS enclosures in mm (inches)PU Part No.
SVHeight WidthB1 Depth
2000 (78.7) 502(19.8) 600 (23.6) 1 9660.610
2000 (78.7) 702(27.6) 800 (31.5) 1 9659.580
1
2
Maxi-PLSSystem accessories:for Maxi-PLS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Busbar glandExceeds the requirements of BGV A2 in conjunction with the divider panel and the divider panel modules.
Busbar gland Maxi-PLS
Material:PA 6.6
Configuration:Assembly parts.
Note:The busbar gland may also be used as a cover for the longitudinal connectors.
For Maxi-PLS PU
For usewithout
longitudinal connectorsPart No. SV
For usewith
longitudinal connectorsPart No. SV
2000 A 1 set 9640.6001) 9640.6102) – 3200 A 1 set 9650.6001) – 9650.6102) Also requiredBusbar gland 1 set – 9640.6002) 9650.6002)
Required number of packs for system configuration1) 3-pole = 6 packs
ISV Distribution EnclosureUp to 630 A/up to 1600 A
B
2.9
ISV
Dis
trib
utio
n En
clos
ure
Systematic fast assembly
The ISV enclosure system, with its pre-configured mounting level, is perfectly prepared for mounting the installation modules.
The required modules may be screw-fastened directly to the mounting levels without any further accessories.
The matching contact hazard protection cover plates inside the enclosure guard against accidental contact with live parts.
The one-stop supplier concept has distinct advantages.
Easier planning and procurement with one partner, faster
installation due to coordinated systems and reduced
labor costs and investment.
ISV-TS8 enclosure system ● Bayable with all TS8 enclosures of the same height and
depth● Pre-configured● Flexible interior installation with the TS8 enclosure
accessories range, such as doors, lock systems, partial mounting plates and climate control components
● Optional door hinging on the left or right side● Suitable for component mounting as an incoming or outgoing
feeder panel, depending on requirements● Cable entry freely selectable depending on the enclosure
configuration
ISV modules ● Pitch pattern (H x W) 150 x 250 mm● Refined quick-fit assembly system facilitates precise
positioning of the modules in the ISV-TS8 enclosure● Cover is prepared for a lead seal
ISV components Fully configurable with Rittal components, such as:● NH fused isolators● NH on-load isolators● Bus-mounting fuse bases● Connection components● Optional busbar installation with SV busbar systems up to
1600 A (185 mm bar center distance) or Rittal Maxi-PLS up to 2000 A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ISV-TS8 enclosures for distribution enclosures up to 630 A
ISV Distribution Enclosure
409Rittal Handbook 31/Power Distribution Systems
ISV
Dis
trib
utio
n En
clos
ure
B
2.9Material:Sheet steelEnclosure frame, roof, rear wall and gland plates: 1.5 mm (16 ga)Door: 2.0 mm (14 ga)Contact hazard protection frame: Hard PVC, RAL 9002 (white gray)
Finish:Enclosure frame: Dipcoat-primedRoof, rear wall, door(s): Dipcoat-primed,powder-coated on the outside in textured RAL 7035 (light gray)Gland plates: Zinc-plated..
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) Cable entry grommets, see page 965. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request. To order sidewalls in textured RAL 7032 (pebble gray), please add extension .200 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
reasons, a contact hazard protection module with 4 height units (600 mm) and 2 or 3 width units (500 or 750 mm), depending on the enclosure selection, is always required on the inlet or outlet side.
● When using Rittal NH fused isolators size 00 – 3, see page 353, care should be taken to ensure that for thermal reasons, a contact protection hazard module with at least 1 height unit (150 mm) is always fitted above the NH isolators
● The contact hazard protection modules to cover the NH strips will need to be machined by the customer.
Lock systems Standard double-bit lock insert may be exchanged for comfort handle, see page 881 and other inserts, see page 888.1) Cable entry grommets, see page 965. To order enclosures in textured RAL 7032 (pebble gray), please add extension .XX0 to the Part no. Delivery times available on request. To order sidewalls in textured RAL 7032 (pebble gray), please add extension .200 to the Part no. Delivery times available on request.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contact hazard protection modules● For covering free installation areas● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Contact hazard protection modules ISV
Mechanical interior installationSize
PU Part No. SVHeight unit(U)2)
Width unit(WU)1)
Empty module
1 150 mm 1 250 mm 1 9665.0002 300 mm 1 250 mm 1 9665.0103 450 mm 1 250 mm 1 9665.0204 600 mm 1 250 mm 1 9665.0301 150 mm 2 500 mm 1 9665.0402 300 mm 2 500 mm 1 9665.0503 450 mm 2 500 mm 1 9665.0604 600 mm 2 500 mm 1 9665.0704 600 mm 3 750 mm 1 9665.510
Accessories Page
Terminal block 420
Cable clamp rails 420 1) 1 WU 250 mm2) 1 U 150 mm
Mounting panel modules● With mounting panel made from
2 mm zinc-plated sheet steel● Cover is prepared for a lead seal● Maximum usable depth 142 mm● Insulating material RAL 9002 (white gray)
Mounting panel modules ISV
86
45
142
18531
2
600
4
Clearance frame
Mounting panel module
Mounting panel module with deep cover
Contact hazard protection
Contact hazard protection with deep cover
1
2
3
4
Mechanical interior installation: Mounting panel (H x W)
SizePU Part No. SVHeight unit
(U)2)Width unit
(WU)1)
150 x 200 mm 1 150 mm 1 250 mm 1 9665.080300 x 200 mm 2 300 mm 1 250 mm 1 9665.090450 x 200 mm 3 450 mm 1 250 mm 1 9665.100600 x 200 mm 4 600 mm 1 250 mm 1 9665.110150 x 450 mm 1 150 mm 2 500 mm 1 9665.120300 x 450 mm 2 300 mm 2 500 mm 1 9665.130450 x 450 mm 3 450 mm 2 500 mm 1 9665.140600 x 450 mm 4 600 mm 2 500 mm 1 9665.150
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Support rail modules● For the installation of terminal blocks,
conductors, etc.● Support rails 35/15 mm ● Adjustable on a 25 mm hole pattern● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Support rail modules ISV
129
76
62
86
600
Mechanical interior installation: Number of support rails
SizePU Part No. SVHeight unit
(U)2)Width unit
(WU)1)
11 150 mm 1 250 mm 1 9665.1602 300 mm 1 250 mm 1 9665.170
2 3 450 mm 1 250 mm 1 9665.1803 4 600 mm 1 250 mm 1 9665.190
11 150 mm 2 500 mm 1 9665.2002 300 mm 2 500 mm 1 9665.210
2 3 450 mm 2 500 mm 1 9665.2203 4 600 mm 2 500 mm 1 9665.230Accessories Page
Spacers 419
Terminal block 420
Cable clamp rails 420
Support rails 420 1) 1 WU 250 mm2) 1 U 150 mm
Support modules● Variably usable with switchgear● Solid mounting panel● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Connection modules● For connecting copper and aluminium
conductors● Single-wire or multi-wire conductors with
crimped wire end ferrule or laminated copper bar
● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Connection modules ISV
Mechanical interior installation: Terminal connectiontop and bottom
SizePU Part No. SVHeight unit
(U)2)Width unit
(WU)1)
250 A, 4-pole
Round conductor: 1 x 4 AWG – 300 MCM or 2 x 4 – 3/Ø AWGLaminated flat copper: Clamping areaW x H 17 x 21 mm
3 450 mm 1 250 mm 1 9665.300
250 A, 5-pole 3 450 mm 1 250 mm 1 9665.310
400 A, 4-pole
Round conductor: 1 x 1/Ø AWG – 500 MCM or 2 x 3 AWG – 250 MCMLaminated flat copper: Clamping areaW x H 25 x 21 mm
3 450 mm 1 250 mm 1 9665.320
400 A, 5-pole 3 450 mm 1 250 mm 1 9665.330
630 A, 4-pole
Round conductor: 1 x 250 – 600 MCM or 2 x 250 – 400 MCMLaminated flat copper: Clamping areaW x H 41 x 21 mm
3 450 mm 2 500 mm 1 9665.340
630 A, 5-pole 3 450 mm 2 500 mm 1 9665.350
Accessories Page
Laminated copper bars 361
Cable clamp rails 420 1) 1 WU 250 mm2) 1 U 150 mm
DIN rail mounted device modules● To accommodate DIN rail mounted devices● Support rails 35/7.5 mm ● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
DIN rail mounted device modules ISV
8648.5
600
Mechanical interior installationSize
PU Part No. SVHeight unit(U)2)
Width unit(WU)1)
Horizontal pitch of 12(1 x 12 x 18 mm) 1 150 mm 1 250 mm 1 9665.240
Horizontal pitch of 24(2 x 12 x 18 mm) 2 300 mm 1 250 mm 1 9665.250
Horizontal pitch of 36(3 x 12 x 18 mm) 3 450 mm 1 250 mm 1 9665.260
Horizontal pitch of 48(4 x 12 x 18 mm) 4 600 mm 1 250 mm 1 9665.270
Horizontal pitch of 24(2 x 12 x 18 mm) 1 150 mm 2 500 mm 1 9665.280
Horizontal pitch of 48(4 x 12 x 18 mm) 2 300 mm 2 500 mm 1 9665.290
Horizontal pitch of 72(6 x 12 x 18 mm) 3 450 mm 2 500 mm 1 9665.500
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
NH on-load isolator modules● Suitable to accommodate Rittal on-load
isolators for mounting panel assembly● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
NH on-load isolator for mounting panel assembly
NH on-load isolator modules, ISV
Mechanical interiorinstallation
SizePU Part No. SVHeight unit
(U)2)Width unit
(WU)1)
Mounting panel slotted and positionedplus cutout in the cover to fit NH on-load isolators
1 x size 00160 A 2 300 mm 1 250 mm 1 9665.380
2 x size 00160 A 2 300 mm 1 250 mm 1 9665.390
1 x size 1 250 A 3 450 mm 1 250 mm 1 9665.400
1 x size 2 400 A 3 450 mm 1 250 mm 1 9665.410
1 x size 3 630 A 3 450 mm 2 500 mm 1 9665.420
1) 1 WU 250 mm2) 1 U 150 mm
1
1
2
3
4
Size Part No. SV Part No. SV1) Page
Size 00 3488.000 3489.000
3488.310 3489.310 358
Size 1 3409.000 3409.310 358
Size 2 3415.010 3415.310 359
Size 3 3095.010 3095.310 359 1) With electronic fuse monitoring and LED display
1
234
Power circuit-breaker modules● Suitable for accommodating commercially
available power circuit-breakers of brands ABB,Merlin Gerin, Moeller and Siemens in 3-pole versions, up to 630 A
● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Note:The hole patterns for the attachment of the power circuit-breakers and the corresponding cutout dimensions for the covers are shown in the ISV assembly instructions.
Power circuit-breakers are not included with the supply.
Power circuit-breakers
Power circuit-breaker modules ISV
Mechanical interior installationSize
PU Part No. SVHeight unit(U)2)
Width unit(WU)1)
Mounting panel slottedand positioned for power circuit-breakers
2 300 mm 1 250 mm 1 9665.4303 450 mm 1 250 mm 1 9665.4402 300 mm 1 250 mm 1 9665.4503 450 mm 1 250 mm 1 9665.4603 450 mm 1 250 mm 1 9665.4703 450 mm 1 250 mm 1 9665.480
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Note: ● Depending on the configuration and connec-
tion version, the busbars must be cut to length prior to installation, in accordance with the ISV assembly instructions
● 5-pole busbar version only suitable for the configuration of busbar connections and NH bus-mounting on-load isolators, size 00
● With bus-mounting fuse bases, only 3-pole configuration (L1/L2/L3) is supported. In such cases, N and PE must be configured via busbar support SV 3050.000 (see page 318) or busbar module (Part no. SV 9665.590 or SV 9665.600, see page 418)
Bus-mounting fuse bases and accessories
NH bus-mounting on-load isolator
Busbar supports:ISVSupports:ISV
Mechanical interior installation Usablebusbar dimensions E-Cu PU Part No. SV
Busbar supportfor 2 height units1) and maximim 2 width units2)
Busbars L1/L2/L330 x 5 mm (400 A)30 x 10 mm (630 A)
4 9665.490Busbar N25 x 10 mm
Busbar PE12 x 10 mm
Assembly components Part No. SV Page
Conductor connection clampsfor bar thickness
5 mm 3450.500 – 3453.500/3550.000 324
10 mm 3455.500 – 3458.500/3555.000 324
Plate clamp 3554.000 324
Bus-mounting fuse bases see below
NH bus-mounting on-load isolators, size 00 see below
Also requiredContact hazard protection cover plate for
Conductor connection clamps 416
Plate clamp 416
Bus-mounting fuse bases 416
NH bus-mounting on-load isolators, size 00 416
AccessoriesBusbars E-Cu 360
Busbar connectors for E-Cu3)
30 x 5/10 mm (L1/L2/L3) 9320.020 360
25 x 10 mm (N) 9320.020 360
12 x 10 mm (PE) 9350.070 360
Laminated copper bars 361 1) 1 U 150 mm 2) 1 WU 250 mm3) For busbar connections from enclosure to enclosure
1
234
1234
3
TypeBus-mounting
fuse baseContact hazard protection cover
Endcaps Page
Part No. SV Part No. SV Part No. SV
D 02-E 18 3418.000 3419.000 3420.000 334
D II-E 27 3427.000 3428.000 3429.000 334
D III-E 33 3433.000 3434.000 3435.000 334
4
Size Part No. SV Part No. SV1) Page
Size 00
3400.0003401.0003402.0003403.000
3490.2103491.2103492.2103493.210
338
1) With electronic fuse monitoring and LED display
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contact hazard protection coverFor conductor connection clampsand plate clamp● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
6 x D 02-E 18 2 300 mm 1 250 mm 1 9665.5204 x D II-E 27, 3 x D III-E 33 2 300 mm 1 250 mm 1 9665.540
1) 1 WU 250 mm2) 1 U 150 mm
Contact hazard protection coversFor NH bus-mounting on-load isolators, size 00● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contact hazard protection coverFor conductor connection clampsand plate clamp● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Solid 3 450 mm 1 250 mm 1 9665.6101) 1 WU 250 mm2) 1 U 150 mm
Busbar modules2-pole● For connecting N and PE● Contact hazard protection cover included● Cover is prepared for a lead seal● Insulating material RAL 9002 (white gray)
Busbar modules, ISV
2
1
Mechanical interior installation: Busbar system
SizePU Part No. SVHeight unit
(U)2)Width unit
(WU)1)
2-pole for N and PE with busbars E-Cu 30 x 10 mm
2 300 mm 1 250 mm 1 9665.5902 300 mm 2 500 mm 1 9665.600
Meter mounting board module● Open module for internal measurements● Clearance depth available for meter installation
170 mm● Insulating material RAL 9002 (white gray)
Note:The meter mounting board module does not comply with meter mounting board standard DIN 43 870/VDE 0603 and does not meet the conditions for total insulation. Use in unmetered areas only by arrangement with the local electric supply company.
Meter mounting board module, ISV
Mechanical interior installationSize
PU Part No. SVHeight unit (U)2) Width unit (WU)1)
Attachment rails to accommodate a meter 3 450 mm 1 250 mm 1 9665.790
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
● For installation on one-piece contact hazard protection covers
● H x W x D 250 x 450 x 43 mm● Insulating material RAL 7035 (light gray)
Deep cover ISV
PU Part No. SV1 9665.640
Cover stripsFor blanking spare component cutouts in DIN rail mounted device modules, maximum 12 divider units (12 x 18 mm), divisible every 9 mm.
Cover strips:ISV
PU Part No. SV1 9665.650
Blanking coverFor blanking spare cutouts for bus-mounting fuse bases, 108 mm wide.
Blanking cover:ISV
PU Part No. SV1 9665.660
Wiring bracketsFor installing
● C rails 30/15 mm● TS system chassis with mounting flanges● TS frame section
Wiring brackets ISV
PU Part No. SV10 9665.670
SpacersFor configuring support rails with attachment screws, 53 mm high.
Spacers:ISV
PU Part No. SV2 9665.680
System accessories:for ISV
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Terminal blockFor installation into 250 mm wide contact hazard protection and support rail modules 2-pole for N and ground, each with 20 x 4 mm2,5 x 25 mm2.
● Connection modules● Contact hazard protection modules● Support rail modules
Cable clamp rails:ISV
Width units requiredfor the modules PU Part No. SV
1 WU (250 mm) 1 9665.7002 WU (500 mm) 1 9665.710
Support railsFor snap fastening components or terminals, 15 mm high.
Support rail:ISV
Width units requiredfor the modules PU Part No. SV
1 WU (250 mm) 1 9665.7202 WU (500 mm) 1 9665.730
1
2
3
4
Distribution enclosure ISVSystem accessories:for ISV
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Rittal Handbook 31/Power Distribution Systems
Cable entry gland● Including seal● External dimensions 250 x 160 mm ● Protection category IP 55● Insulating material RAL 7032 (pebble gray)
Cable entry gland ISV
R25
135
223
138
226
Ø 4.5
Version PU Part No. SV14 x M25/32 1 9665.7502 x M25/32/40, 1 x M32/40/50, 2 x M40/50/63 1 9665.760With sealing membranes32 x dia. 7 – 16 mm, 4 x dia. 10 – 20 mm, 3 x dia. 14 – 26 mm 1 9665.770
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com