http://iaeme.com/Home/journal/IJMET 561 [email protected] International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 10, October 2017, pp. 561–578, Article ID: IJMET_08_10_063 Available online at http://iaeme.com/Home/issue/IJMET?Volume=8&Issue=10 ISSN Print: 0976-6340 and ISSN Online: 0976-6359 © IAEME Publication Scopus Indexed REVIEW ON MANUFACTURING OF FIBRE METAL LAMINATES AND ITS CHARACTERIZATION TECHNIQUES K.Logesh Research scholar, Department of Mechanical Engineering, Sathyabama University, Chennai, Tamil Nadu, India V.K.Bupesh Raja Professor & Head, Department of Automobile Engineering, Sathyabama University, Chennai, Tamil Nadu, India Vipin H Nair, Sreerag K.M, Vishvesvaran K.M and M.Balaji UG Scholar, Department of Mechanical Engineering, Veltech Dr.RR & Dr.SR University, Chennai, Tamil Nadu, India ABSTRACT Fibre Metal Laminates (FML) is new class of materials which are in high demand because of its superior mechanical and metallurgical properties. Such materials can be manufactured by a variety of ways depending on size required, end application and cost affordability. However FML are susceptible to defects which are governed by factors such as type of skin and core material selected, preparation method used, post treatment and load applied. Possible defects can be overcome by following care while preparing the material as per end requirements. FML can be used for applications which demand low weight to high strength ratio such as aeronautics, automobiles, marine and structures. Keywords: Fibre Metal Laminates, Skin, Core, Preparation Method, Mechanical Properties, Post Treatment. Cite this Article: K.Logesh, V.K.Bupesh Raja, Vipin H Nair, Sreerag K.M, Vishvesvaran K.M and M.Balaji, Review on Manufacturing of Fibre Metal Laminates and its Characterization Techniques, International Journal of Mechanical Engineering and Technology 8(10), 2017, pp. 553–560. http://iaeme.com/Home/issue/IJMET?Volume=8&Issue=10 1. INTRODUCTION Advancements in the field of materials and manufacturing have brought forward new kinds of materials. Laminate materials are new class of composite materials which have been developed recently. Such materials are tailor made to be used for specific applications. The first fibre metal laminate was developed during 1967. It was found that in comparison with a
REVIEW ON MANUFACTURING OF FIBRE METAL LAMINATES AND ITS CHARACTERIZATION TECHNIQUES
May 19, 2023
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Related Documents
