Yantel Corporation Add 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China Tel 86-755-8355-1886 Fax 86-755-8355-2533 For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com R Description Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Features: Electrical Specifications Frequency Isolation Insertion Loss VSWR Amplitude Balance MHz dB Min dB Max Max : 1 dB Max 5000 - 6000 20 0.25 1.22 ± 0.40 Phase Balance Power Operating Temp. Degrees Avg. CW Watts ºC 90 ±3.0 20 -55 to +85 Mechanical Outline GND Orientation Marker Part No. ● 5000-6000 MHz ● High Power ● Very Low Loss ● Tight Amplitude Balance ● High Isolation ● Low VSWR ● Good Repeatability ● CTE compatible with FR4, G-10, RF-35, RO4350B and polyimide ● Immersion gold, prevent surface oxidation & scratch ● RoHS Compliant ● Tape & Reel Package available TOP VIEW SIDE VIEW BOTTOM VIEW Pin 1 Pin 2 Pin 4 Pin 3 Pin 2 Pin 1 Pin 3 Pin 4 Notes: 1. All the above data are based on specified demo board. 2. Insertion loss:Thru board loss has been removed. HC5500M03 Hybrid Coupler 3 dB, 90 o Rev A1 HC5500M03 xxxx 10.16 5.08 1.74 7.72 2.64 1.07 0.61 0.61 The HC5500M03 is a low profile, high performance 3dB hybrid coupler in a new easy to use,manufacturing friendly surface mount package.The HC5500M03 is designed particularly for balanced power and low noise amplifiers, plus signal designed distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 20 Watts.
9
Embed
Rev A1 - Yantel Corpyantel-corp.com/old/en/products/datasheel/HC/HC5500M03.pdf1. All the above data are based on specified demo board. 2. Insertion loss:Thru board loss has been removed.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com
R
Description
Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide.
Features: Electrical Specifications
Frequency Isolation InsertionLoss
VSWR AmplitudeBalance
MHz dB Min dB Max Max : 1 dB Max
5000 - 6000 20 0.25 1.22 ± 0.40
PhaseBalance Power
OperatingTemp.
Degrees Avg. CW Watts ºC
90 ±3.0 20 -55 to +85
Mechanical Outline
GND
Orientation MarkerPart No.
● 5000-6000 MHz● High Power● Very Low Loss● Tight Amplitude Balance● High Isolation● Low VSWR● Good Repeatability● CTE compatible with FR4, G-10, RF-35, RO4350B and polyimide● Immersion gold, prevent surface oxidation & scratch● RoHS Compliant● Tape & Reel Package available
TOP VIEW SIDE VIEW BOTTOM VIEW
Pin 1 Pin 2
Pin 4 Pin 3
Pin 2 Pin 1
Pin 3 Pin 4
Notes:1. All the above data are based on specified demo board.2. Insertion loss:Thru board loss has been removed.
HC5500M03Hybrid Coupler 3 dB, 90o
Rev A1
HC5500M03xxxx
10.16
5.08
1.74
7.72
2.64
1.07 0.61
0.61
The HC5500M03 is a low profile, high performance 3dB hybrid coupler in a new easy to use,manufacturing friendly surface mount package.The HC5500M03 is designed particularly for balanced power and low noiseamplifiers, plus signal designed distribution and other applications wherelow insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 20 Watts.
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com
R
Hybrid Coupler Pin Configuration
The HC5500M03 has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification:
*Combiner Isolated Output A 90-Ð AÐ *Combiner Output Isolated AÐ A 90-Ð
*Note: “A” is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port.
Note:1. When calculating insertion loss at room temperature, demo board loss should be removed from both coupling & transmission data.Please refer to the below table for demo board loss :
( )( )
Definition of Measured Specifications
Parameter Definition Mathematical Representation
VSWR(Voltage Standing Wave
Ratio)
The impedance match of the coupler to a 50W
system. A VSWR of 1:1 is optimal.
VSWR = min
max
VV
Vmax = voltage maxima of a standing wave Vmin = voltage minima of a standing wave
Return Loss
The impedance match of the coupler to a 50W
system. Return Loss is an alternate means to
express VSWR.
Return Loss (dB)= 20log 1-VSWR1VSWR +
Insertion Loss The input power divided by the sum of the power at the two output ports.
Insertion Loss(dB)= 10log transmission cpl
in
PPP+
IsolationThe input power divided
by the power at the isolated port.
Isolation(dB)= 10log iso
in
PP
Phase Balance The difference in phase angle between the two
output ports. Phase at coupled port – Phase at transmisson port
Amplitude BalanceThe power at each output
divided by the average power of the two outputs.
10log +2PP
Ptransmissioncpl
cpl and 10log
+2PP
Ptransmissioncpl
transmission
1. Calibrating your vector network analyzer.2. Connect the VNA 4 Port to DUT respectively.3. Measure the data of coupling through port 1 to port 4(S41).4. Measure the data of transmission through port 1 to port 3(S31).5. Measure the data of isolation through port 1 to port 2(S21).6. Measure the data of phase port 4 & port 3(port 1 feeding).7. Measure the data of return loss port 1, port 2, port 3 & port 4.8. According to the above data to calculate insertion loss, amplitude balance & phase.
Test Method
HC5500M03Hybrid Coupler 3 dB, 90o
Rev A1
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com
R
Recommended PCB Layout
NOTE:
1. 50Ω line width is shown above designing from RO4350B dieletric thickness 0.762mm; copper 1 OZ
2. Bottom side of the PCB is continuous ground plane.
3. All dimensions shown in mm.
Reflow Profile
Time(s)
melting point alloy217-219
Preheat/soak60-80sec
Soaking Zone60-90sec
Reflow Zone50-90sec
cooldown
Peak temperature 235-255
HC5500M03Hybrid Coupler 3 dB, 90o
Rev A1
VIA
0.50
2.54
7.62
1.62 4X50Ω LineØ0.80
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com
R
Reliability Test Flow
Mechanical/Visual Inspection n=50
Electrical Testing at room temperature S-parameter
n=50
Mount parts to test boards n=25
Visual Inspection n=25
Mount boards to Al blocks n=25
Electrical Testing at room temperature and over temperature S-parameter(-55℃,25℃,95℃,150℃,200℃)
n=25
Visual Inspection n=25
Resistance to Solder per Mil202F.210E.Condition
K heat n=20
Visual Inspection n=25
Electrical Testing at room temperature S-parameter
n=25
Control Units n=5
Control Units n=5 Visual Inspection n=25
Voltage Breakdown Test per Mil202F-301 25℃,1KV n=40
Visual Inspection n=50
Thermal Cycle 75 cycles,--55℃ to125℃,5℃/min 15 min dwell n=40
Visual Inspection n=50
M e c ha n i c a l / v i s ua l Inspection n=25
Electrical Testing at room
temperature S-parameter
n=50
Control Units n=10
Control Units n=5
Reliability Test
HC5500M03Hybrid Coupler 3 dB, 90o
Rev A1
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com
R
Reliability Test Flow
Visual Inspection n=50
Electrical Testing at room temperature
S-parametern=50
n=40
Moisture Resistance Testing -25℃ to 65℃ for 2hrs.@90% humidity.Increase to 95% humidity and soak for 4hrs.ramp temp to
25℃ in 2hrs,repeat for 10 cycles and then soak -10℃ for 3hrs
Electrical Testing at room temperature
S-parametern=50
Visual Inspection n=50
Bake parts for 1 hr at
100℃ n=40
Electrical Testing at room temperature S-parameter n=50
Visual Inspection n=50
Electrical Testing at room temperature
S-parameter n=6
Microsection 2 life,1 high power
and 1 control
Visual Inspection n=25
Mechanical Inspection
n=25
Microsection 3 Test units
and 1 control
High Power Test n=2
Control Units n=10
Control Units n=10
Life Testing Rated power input 100℃ base plate temperature 96 hrs 3 in series n=6
HC5500M03Hybrid Coupler 3 dB, 90o
Rev A1
Yantel CorporationAdd 3F, Building 3, Southern District 2 of Zhongguan Honghualing Industrial Park, Xili, Nanshan, Shenzhen, China
Tel 86-755-8355-1886 Fax 86-755-8355-2533For detailed performance specs & shopping online see Yantel web site : www.yantel-corp.com