Research1 Use Me

R.M.K. Engineering R.M.K. Engineering CollegeCollege

Department of Mechanical Engineering

WeWelcome the Experts from

Anna University of Technology

28.12.2010

1

ContentsContentsAbout the departmentDepartment facilitiesResearch activitiesProfessional activitiesStudents achievements

2

About the DepartmentAbout the Department

The Institution started in 1995 and Mechanical Engineering was one of the first branches.

Accredited in 2003 and accreditation renewed by NBA for 5 years from 2007. (F.No. NBA/ACCR-668/2004 dated May 7 2007)

Number of UG batches Passed out till date : 12

PG course on Product Design and Development started :2006

3

About the Department...About the Department...The current sanctioned strength

UG – 120, PG – 18

Number of University Ranks in UG

2006-10 : 3 (25,33,36) (100% pass, 8th Sem)2005-09 : 2 (13,25) 2004-08 : 1 (27)

About the About the Department…Department…Faculty strength : 22

Faculty experience

More than 15 years

More than 10 years

More than 5 years

Less than 5 years

5 6 6 5

5

Faculty qualificationsFaculty qualificationsPh.D Pursuing Ph.D

Anna University , Chennai

Anna University Tech , Coimbatore

4 CEG - 5 R.M.K - 4 (Research Centre)

1

6

Dr. K.ChandrasekaranDr. K.ChandrasekaranTotal Experience : 43 yrs (teaching &

research)Ph.D: IIT Madras- Engineering

DesignME : University of Madras BE : University of Madras Supervisor : Presently guiding 5

scholarsSpecialisation

◦FEM- One of the few experts in this area◦Mentor –AU-FRG centre, Anna University

Chennai7

Dr. R.KrishamurthyDr. R.KrishamurthyTotal Experience: 42 yrs (teaching &

research)

Ph.D : IIT Madras - Gear EngineeringM.Tech : IIT Madras – Machine ToolBE :University of Madras Supervisor : Presently guiding 2

scholarsSpecialisation

◦Metal Cutting ◦Tribology, Condition Monitoring

8

Dr. S.K.MalhotraDr. S.K.MalhotraTotal Experience: 41 yrs (teaching

& research)Ph.D : IIT Madras - CompositesMS : IIT Madras BSc Engineering: Agra UniversitySupervisor : Presently guiding 3

scholarsSpecialisation

◦Composite Materials◦Machine Design

9

Dr. T.N.Srikantha DathDr. T.N.Srikantha DathTotal Experience : 25 yrs (Industry, teaching

& research)Ph.D : AU Chennai- SCMME : Karnatak University- Production

Management BE : Bangalore University- Industrial

& Production Engg

Supervisor : Presently guiding 2

scholarsSpecialisation

◦ Production and Operations Management◦ Quality Engineering and Management

10

Department facilitiesDepartment facilitiesName of the Laboratory Total value of the

Equipments in Rs

Thermal Lab 5,77,082

Metrology & Measurements Laboratory

2,60,246

Steam Laboratory 45,600

Dynamics Laboratory 1,32,239

Lathe Shop 10,86,058

Special Machine Shop 17,03,976

CAD/CAM Laboratory 61,21,452

Mechatronics Laboratory 13,75,64711

Thrust AreasThrust AreasMachining of Composites Tribology and friction studies New Product Development Supply Chain Management

12

Department facilities..special Department facilities..special equipmentequipment

Thermal Engineering laboratory

Name of the Equipments Total Value in Rs

Centrifugal blower 64,260Low Speed Wind Tunnel 2,93,250Cooling tower 63,750Auto Exhaust gas Analyzers

1,87,560

LPG Refrigeration 63,228Four Stroke Four Cylinder Diesel Engine with hydraulic test rig

2,15,902

13

Department facilities…Special Department facilities…Special equipment and Software available for equipment and Software available for

research activitiesresearch activitiesDynamics Laboratory

Metrology & Measurements Laboratory

Name of the Equipment Total Value in Rs

Data acquisition system 3,39,600

Wear and Friction monitor 4,55,000

Name of the Equipment Total Value in Rs

Coordinate Measuring Machine*

9,97,500

14

Computing facilities…Computing facilities…

High End workstation 12 seats Round the clock Internet service Biblographic services with

intranet provided from library

15

Software resources …

ANSYS 12.1Solid WorksHiCADAUTOCADMATLABLabviewSPSS

Research activities.. Papers Published in Research activities.. Papers Published in the last 3 yearsthe last 3 years

Name and Designation

Conference Journals

Dr. R.Krishnamurthy, Professor

2 18

Dr.S.K.Malhothra,Professor

3 3

Dr.T.N.Srikantha Dath,Professor

1 4

17

Publication details of Dr. R.Krishnamurthy, ProfessorJournals in 2010

A.Kharim Kutty, R.Krishnamurthy and M.M.Mayuram, “Response of Detonation Sprayed Ceramics to Abrasive Working Environment”, Journal of the Australian Ceramic Society, Volume 46[1], 2010, 63-70.

B. Anand Ronald L.Vijayaraghavan and R.Krishnamurthy, “Chip morphology: an indicator of response of composite material to grinding”, International Journal of Materials and Product Technology, Volume 37, Number 1-2/2010, pp 71-82.

S. Rajakumar, L. Vijayaraghavan, M.M. Mayuram and R. Krishnamurthy, “Flexural Characteristics of D-Gun Sprayed functionally Graded Alumina and Alumina-Zirconia Ceramic Composited Coatings”, International journal of Materials Engineering Innovation, (Accepted) 18

Publication details

S. Rajakumar, L. Vijayaraghavan, M.M. Mayuram and R. Krishnamurthy, “Investigations on Flexural Characteristics of Functionally Graded Alumina and Alumina-Titania Ceramic Composite Coatings”, International Journal of Materials and Structural Integrity (accepted)

Giridhar, D., Vijayaraghavan, L., Krishnamurthy, R., “Micro-grooving studies on Alumina ceramic material’, Journal of materials and manufacturing process, Accepted June, 2010, (accepted).

A. K. Sharma and R. Krishnamurthy, Sliding wear characterisation of microwave glazed plasma sprayed ceramic composites, Proc. IMechE, 224, Part J: J. Engineering Tribology, (J5), DOI:10.1243/13501JET692, 497–511, 2010.

19

Publication details…Journals in 2009

R. Varatharajan, S.K. Malhotra, L. Vijayaraghavan, R.Krishnmuthy, “Static and dynamic mechanical properties of carbn fibre reinforced polypropylene composites”, International Journal of Precision Technology, Volume 1, Number 2/2009, pp. 155-162.

  M. Abdul Majeed, L. Vijayaraghavan, S.K. Malhotra and R.

Krishnamurthy, “Characterization and machining of alumina ceramic reinforced with lanthanum phosphate”, Journal of materials processing Technology, Volume 209, Issue 5, 1 March 2009, Pages 2499-2507.

  B. Anand Ronald, L.Vijayaraghavan and R.Krishnamurthy,

“Studies on the influence of grinding wheel bond material on the grindability of metal matrix composites”, Materials & Design, Volume 30, Issue 3, March 2009, Pages 679 – 65-86.

20

Publication details.. S.Rajakumar, L.Vijayaraghavan, M.M.Mayuram and R.

Krishnamurthy, “Experimental Design and Characterization Based Optimization of Detonation Sprayed Fused Alumina Zirconia Deposition”, Journal of Manufacturing Technology Research, 2009, 305-305.

S. Rajakumar, L. Vijayaraghavan, M.M. Mayuram and R. Krishnamurthy, “The Damage Mechanisms of Several Detonation-Gun Sprayed Ceramic Coatings in Controlled Scratching”, International Journal of Engineering Technology and Management, Vol.1, July 2009, pp 55-59.

S. Rajakumar, L. Vijayaraghavan, M.M. Mayuram and R. Krishnamurthy, “Influence of Air-Jet Erosion on Detonation-Gun Sprayed Aluminia-Zirconia Ceramic Composite Coating”, International Journal on Design and Manufacturing Technologies, Vol.3, (2), July 2009, pp 17-21.

A. K. Sharma and R. Krishnamurthy, Flexural Response Characterisation of Plasma Sprayed and Microwave Glazed Ceramic Composite Coatings, RSM International Journal of Engineering, Technology and Management, Vol. 1, 7-17, July 2009.

21

Publication details..Journals in 2008

M. Abdul Majeed, L. Vijayaraghavan, S.K. Malhotra and R. Krishnamurthy, “Ultrasonic machining of Al203/LaP04 composites”, International Journal of Machine Tools and Manufacture, Volume 48, Issue 1, Janary 2008, Pages 40-46.

M.Abdul Majeed L. Vijayaraghavan, S.K. Malhotra and R.Krishnamurthy, “A.E. monitoring of ultrasonic machining of AL203/LaPO4 composites”, Journal of Materials Processing Technology, Volume 207, Issues 1-3, 16 october 2008, Pages 321-329.

22

Publication details..Journals in 2007

B. Anand Ronald, L. Vijayaraghavan and R. Krishnamurthy, “Studies on Grooving of Dispersion Strengthened Metal Matrix Composites”, Materials Forum, Journal of Materials Australia, Vol.31, pp.102-109, 2007.

 P.S. Sreejith, R.Krishnamurthy and S.K Malhotra, “Effect of specific cutting pressure and temperature during machining of carbon/phenolic ablative composite using PCBN tools”, journal of Materials Processing Technology, Volume 183, Issue 1, 5 march 2007, Pages 88-95.

S. Arul, L.Vijayaraghavan, R.Krishnamurthy and S.K. Malhotra, Online monitoring of acoustic emission for quality control in drilling of polymeric composites, J Mater Process Technol 185 (20070, pp.184-190.

23

Research activities…Research activities…Conference in 2007

B. Anand Ronald, L.Vijayaraghavan and R. Krishnamurthy, “Influence of reinforcement particle size on the grindability of Aluminium based Metal Matrix Composites”, International Conference on ‘Total Engineering, Analysis & Manufacuring Technologies’ (TEAMTECH 2007), 4th – 6th October 2007, Indian Institute of Science (II Sc), Bangalore, INDIA, pp.98. (Awarded best paper)

B. Anand Ronald, L.Vijayaraghavan and R.Krishnamurthy, “Evaluation of Surface quality of ground Al/SiCp Metal Matrix Composites”, 9th International Symposium on Metrology and Quality Control (ISMQC) conference, held in IIT Madras, between 21-24th November 2007, pp.110-114.

24

Publication details.. of Dr. S.K.Malhothra,

Internal Conferences 

Delivered an invited talk titled, “Recycling of fibre reinforced thermosetting polymer composites” at International Conference on Recycling of Materials (ICRM-2009) held at Kottayam, Kerala during July 16-19,2009.

  Delivered an invited lecture, titled “Studies on chopped sisal

fibre reinforced bulk moulding compounds” at International Conference on Polymer Processing & Characterization (ICN2010) held at Kottayam during Jan 15-17, 2010.

  Delivered an invited talk titled “Studies on jute/polyester

composites” at International Conference on Natural Polymers (ICNP-2010) held at Kottayam during Sept 24-269, 2010.

25

Publication details..International Journals

P. Kanakasabai, S.K.Malhotra, A.P.Deshpande, “Effect of fabric treatment and filler content on jute/polyester composites”, JI of Plastics Tech, 11, 743-761 (2007).

V.Kumar J.Ramkumar, S.Aravindan, S.K.Malhotra, K.Vijai, M.Shukla, “Fabrication and characterization of ABS nano composites reinforced by nano sized alumina particles”, Intl JI of Plastics Tech, 13(2): 133-149(2009).

  A.K. Singhal, Vivek Kumar, J. Ramkumar, R. K. Singh and S. K.

Malhotra, Feb. 2009, “Experimental investigation of mechanical and tribological performance of XNBR”, Central Institute of Plastics Engineering and Technology, PP. 1-11,

26

Publication details.. of Dr. T.N. Srikantha Dath

International Journals

Srikantha Dath, T.N., Rajendran,C. and Narashiman, K. (2010) 'An empirical study on supply chain management in India: the perspective of Original Equipment Manufacturers and suppliers', European J. Industrial Engineering, Vol.4, No. 1, pp.2-39.

Srikantha Dath, T.N., Rajendran, C. and Narashiman, K. (2010) 'An empirical study on Supply Chain Management: the perspective of Logistics Service Providers', Int. J. Logistics Systems and Management, Vol. 6, No. 1, pp.1–22.

27

Publication details..

Srikantha Dath, T.N., Rajendran,C. and Narashiman, K., (2009) 'A conceptual framework for Supply Chain Management with specific reference to a developing economy', Int. J. Logistics Systems and Management, Vol. 5, No. 5, pp.473–524.

Srikantha Dath, T.N., Rajendran,C. and Narashiman, K., (2008), 'An empirical study on supply chain management from the retailer's perspective', International Journal of Procurement Management, Vol. 1, No. 4, pp.453-471.

Research activities…Research activities…Papers published by faculty in

Journals /conferencesName and Designation No of papers

Published/Presented

G.Deendayalan ,Professor 1

S.Sekar, Asst. Professor 2

A.Kadirvel, Asst .Professor 1

R.Parvatham, Asst. Professor 1

R.Ganesh, Asst .Professor 3

29

Publication details.. of S.Sekar,

G.Srinivas, S.Sekar, R.Saravanan and S.Renganarayanan, 2009, Studies on a water-based absorption heat transformer for desalination using MED, Desalination and Water treatment, Vol 1, pp . 75-81.

S.Sekar and R.Saravanan, 2011, Exergetic Performance of ecofriendly absorption heat transformer for sea water desalination, International Journal of Exergy, Vol. 8, pp. 51-67.

30

Presentation details..

R.Ganesh , Asst Professor R.Ganesh, N.B.Anand, P.Hariharan and G.Sakthinathan,

2009, Preparation, Characterisation and Mechanical Properties of Aluminum Matrix Nanocomposites, Sixth International Conference on “Precision, Meso, Mico and Nanp Engineering”, H37-H43.

A. Kadrivel, Asst Professor A. Kadrivel and P. Hariharan, 2009, A Review

on Various Research Trends in Micro EDM, Sixth International Conference on“Precision, Meso, Mico and Nanp Engineering”, C42- C45.

31

Research activities- Research activities- Funded Projects

Title of the Project Value in Rs

Funding agency

Status

Process Development For FRTP Prepregs and compression moulding of thermoplastic compositesPI- Dr.S.K.Malhotra

18,00,000

Department of science and technology

Approved

Design and Development of Affordable Bed for Preventing the decubitus ulcer for immobile patients and elderly persons (as Co-I) Dr. T.N.Srikantha Dath

8,00,000

Science For Equity, Empowerment & Development Division

Submitted,

Presentation over

32

Research activities…MODROBSResearch activities…MODROBS• Presently, two sanctioned MODROBS projects are

under various stages of Implementation

1. Title of the Project : Modernization of Metrology LabValue of the Project : Rs.11,00,000Funding agency : AICTEFor Department : MechanicalStatus : 90% Utilized

2. Title of the Project : Modernization of Dynamic laboratoryValue of the Project : Rs 8,00,000Funding agency : AICTEFor Department : MechanicalStatus : Completely Utilized

33

Library - SubscriptionsLibrary - Subscriptions

List of ASME Transactions/Journals 1. Applied Mechanics Reviews

2. Journal of Applied Mechanics

3. Journal of Biomechanical Engineering

4. Journal of Computational Non linear Dynamics

5. Journal of Computational and Information Science and Engineering

6. Journal of Dynamics Systems, Measurement, and Control

7. Journal of Electronic Packaging

34

Library – Subscriptions…Library – Subscriptions…

8. Journal of Energy Resources Technology

9. Journal of Engineering for gas turbines and power

10. Journal of Engineering materials and technology

11. Journal of Fluid Engineering

12. Journal of fuel cell Science and Technology

13. Journal of Heat transfer

14. Journal of Manufacturing science and Engineering

Library – Subscriptions…Library – Subscriptions…15. Journal of Mechanical Design

16. Journal of mechanism and Robotics

17. Journal of Medical Devices

18. Journal of Nano technology in Engineering and Medicine

19. Journal of Off shore mechanics and arctic Engineering

20. Journal of Pressure vessel Technology

21. Journal of Solar Engineering

22. Journal of Thermal Science and Engineering applications

23. Journal of Tribology

24. Journal of Turbo machinery

25. Journal of Vibration and Acoustics36

Library - Subscriptions .Library - Subscriptions .National Journals

1. Bulletin of Material Science 2. ICFAI Journal of Mechanical Engineering3. Indian Foundry Journal4. Indian Journal of Engineering and Material Sciences5. Industrial Engineering Journal6. Industrial Product Finder7. Institution of Engineers Metallurgical & Materials

Engineering8. Institution of Engineers Aerospace Engineering9. Institution of Engineers Mechanical Engineering10.Institution of Engineers Mining Engineering11.Institution of Engineers Production Engineering12.Journal of Heat and Mass Transfer

37

Library…Library…Books

Department Title Volumes

B.E - Mechanical Engg.

1373 4655

M.E – Product Design & Development

306 973

Total 1679 5628

38

Institutional membership of Institutional membership of Library Library Anna UniversityIITMadrasBritish council LibraryDELNETMALIBNET

39

Professional activitiesProfessional activitiesWorkshops/Short courses/Symposiums/Conferences

Short course on Introduction to Noise & Vibration Control, by Prof.Michael Brennan and Prof.Phillip Joseph, Institute of Sound & Vibration Research, University of Southampton, UK – 24th&25th of September 2010.

One-day brain-storming workshop on “Making undergraduate engineering projects more relevant” at IIT Madras- 28th August 2010 in association with IIT Madras

Short course on “Where do Great Strategies Come From?”, Neil Rainey & Timothy Chandran, Telstra Corporation, Australia – 30th June, 1st & 2nd July, 2008

40

Professional activitiesProfessional activities Short course on “Engineering Design for Fatigue and

Fracture”,27-29 January2008, by Dr.P.Vasudevan,Dr.N.K.Naik & Dr.Yogesh Desai, IIT Bombay

Workshop on “Teaching Finite Element Analysis” by Dr.J.N.Reddy, Texas A&M University, USA, for Teachers from Engineering Colleges – 13th & 14th December 2007

Short course on “Voice of the Customer” by Gerry Katz, Executive Vice-President, American Marketing Sciences Inc., USA – 19th & 20th of December 2006, in Association with PDMA India.

Professional activities…Professional activities…

Toptech Program on “Introduction to Vehicle Noise & Vibration”, by Michael Brennan and Phillip Joseph, ISVR, University of Southampton, UK -23,24 & 25 October 2006, in association with SAE India

  Two-day workshop on “Managing Product Innovation”,

19&20 Dec.2005, at IIT Madras by Dr.Hamsa Thota & Dr.Robin Karol, PDMA,USA

One-Day Workshop on Revamping of Design Curricula in Engineering at IIT Madras, on the 1st of March 2004

42

Professional activities…Professional activities… Four Day Short Course on Measurement and Control of Noise

and Vibration from the 19th to the 22nd of January 2003 at Anna University, with resource persons from the Institute of Sound and Vibration Research, University of Southampton, UK.

One-Day Seminar on Product Life-Cycle Management to Stay Competitive for Tomorrow, R.M.K.Engineering College, 24th of January 2002, jointly sponsored by IBM.

Short-term Course on Measurement and Control of Noise and Vibration, at R.M.K.Engineering College,13th to 16th of December 1999, in collaboration with faculty from the Institute of Sound and Vibration Research, University of Southampton, UK..

Professional activities…Professional activities… Special Lecture on Emerging Technologies in Product

Design, by Prof.Stan Oliver, University of Sutherland, UK, for students and faculty members,2001

  One Day Workshop on Design for Manufacture and

Assembly with Prof.Ken Swift, University of Hull,UK, as the principal resource person – for participants from industries and institution, Hotel Breeze, Chennai,2000

One-day seminar on Concurrent Engineering Practices in Automotive Industries, February ,1999 at R.M.K.Engineering College, for participants from industries and institutions

44

Professional activities…Professional activities…International Conferences Conducted International Conference on “Millennium Development

Goals: Role of ICT & Other Appropriate Technologies”, Dec.27-29,2009 co-sponsored by TCS, IEEE, Anna University-Chennai, University of Technology, Sydney, Australia at R.M.K.Engineering College ( Co-chairs: Dr.A.Jagadeesh, RMKEC & Dr.Daniel Chandran UTS)

PDMA India International Conference 2007, in association with IIMB Management Review, on “Product Development for Developing Country Markets: Scope, Challenges and Management” during the 17th to 19th of December 2007 at IIMB Bangalore. ( Co-chairs: Dr.K.Chandrasekaran, RMKEC & Dr.Ganesh Prabhu, IIMB)

45

Professional activities…Professional activities… 2nd International Conference on “Innovation and New Product

Development”, organized by the PDMA India (An affiliate of Product Development & Management Association of USA), conducted at R.M.K.Engineering College from the 19th to the 21st of December 2006. ( Co-chairs: Dr.K.Chandrasekaran, RMKEC)

Three-day international conference on “Innovative Product Development: Engineering Meets Marketing” from the 21st to the 23rd of December 2005 at IIT Madras. The conference was co-sponsored by the IIM Bangalore, IITM, and the Nancy Neely Chair for American Enterprises, Marshall Business School, University of Southern California, USA. (Co-chairs: Dr.K.Chandrasekaran, RMKEC & Dr.Gerard J. Tellis, University of Southern California, USA).

46

Professional activities -Professional activities -ParticipatedParticipatedName and Designation Number of

workshops/Seminars

Number of Conferences

G.Deendayalan, Professor 2 2

S.Sekar, AP 2

R.Suresh Kumar, AP 1

A.Kadirvel, AP 2

G.Mahendran, AP 1

M.Balraj, AP 1

C.Jayabalan, AP 3

47

Professional activities…Professional activities…Name and Designation Number of

workshop/Seminar

R.Parvatham, AP 1

M.Balakumar, AP 4

R.Parvatham, AP 1

M.Mudhukrishnan, AP 1

A.Paramasivam, AP 3

R.Ganesh, AP 2

S.Suseel, AP 2

48

Professional activities…Professional activities…

Name and Designation Number of workshops/Seminars

V.Sivakumar,AP 4

N.Mohanraj, AP 1

I.S.Merin Sathya Das, AP 1

Workshops, Conferences attended by faculty…

49

Students AchievementsStudents Achievements P.Suresh presented a paper at International Conference at

Dr.B.R.Ambedkar National Institute of Technology, Jalandhar , on 3rd December 2010.

K.S.Karthick Raja & A.AshokPresented Paper at Coimbatore Institute of Technology, 1st Feb 2010 and won the second prize.

Anandan N B & N.T. Avinash Presented Paper at Coimbatore Institute of Technology, 1st Feb 2010 and won first prize.

50

Students Achievements..Students Achievements.. R.Prathap Mohan Presented Paper at Arunai Engineering

College on 4th March 2010.

P.Dinesh Presented Paper titled “Energy Recovery from Exhaust gas” at Jeppiar Engineering College on 5th March 2010.

Dhileepen. P Presented Paper at Sree Muthukumaran Institute of technology on 14th Sep 2009

Anandan N B Presented Paper at KCG College of Technology on 3rd Oct 2009.

Students Achievements…Students Achievements… Rohit John Presented paper titled “Preparation and estimation

of Mechnical Properties of Al-10wt% Al2O3 Nano Composites” at College of Engineering Trivandrum on 8th Oct 2009.

Anandan N B Presented Paper at Sixth International Conference on Precision, Meso, micro and Nano Engineering on 11th Dec 2009.

S.Dilip Kumar and P.Dinesh Presented Paper at Sairam Engineering College on 14th Aug 2009 and won first prize.

S.Dinesh Presented Paper at Vel Tech Engineering College on 2nd Sep 2009 and won third place.

52

Students Achievements…Students Achievements… S.Kartick Iyyappa Presented paper at St.Josephs College of

Engineering on 19th Sep 2009.

Rohit John Presented paper titled “Advances in Automobile Industry-Brain controlled Car for the physically challenged using artificial Intelligence” at Dhanalakshmi Srinivasan Engineering College on 13h March 2009.

Krishna Kumar H Presented paper at Velammal Engineering College on 18th Sep 2008.

D.L.Rajganesh & M.Arun Narayan Presented paper at Jeppiar Engineering College on 7th March 2008.

Arunan.A.R. and P.P.Kamalesh Presented paper at St. Peter’s Engineering College on 21st Sep 2007.

53

Students Achievements…Students Achievements…Students are encouraged to involve

in live projects in Industry.Management sponsors selected

projects on merit basis which are done in-house

2009 Batch – Low cost milling Machine

2010 batch – All terrain Vehicle

54

Placement: Placement: ◦2008 Batch : All eligible students

placed in reputed companies ◦2009 Batch : All eligible students

placed in reputed companies ◦2010 Batch : 27 out of eligible 50

students placed through campus till date. 7 in core companies

◦Students are given additional option to appear for core companies

55

Higher Studies:Higher Studies:◦Around 15 % students(8 to 10 )

invariably go for higher Education ◦Interface sessions with foreign

university professors are provided ◦Introductory sessions are conducted

for GRE and TOFEL◦MOU’s with foreign educational

institutions

56

Thank youThank you

57