High-Quality Cooling & Heating Coils REPLACEMENT COILS OEM and Separate Sale
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Literature Number 570-359
Designed tomeet yourapplicationneeds.
COIL SUPPORT HOTLINEFor additional information or technical assistance, call us at toll-free:1-800-225-COIL (2645) or email: [email protected]
TUBEPATTERNS
OUR FULL LINE OF PRODUCTS
Fluid Coils• Chilled and hot water• 1/2” and 5/8” available
Steam Coils• Standard and non-freeze• 5/8”and 1” available
Refrigerant Coils• Condenser and evaporator• 3/8”, 1/2” and 5/8” available
Booster Coils• 1/2” and 5/8” available• Quick-ship delivery of most common sizes
Standard lead-time 3-4 weeks
Premium FAST Ship Options:• 10 and 5 day shipments• 2 day emergency shipment
(Subject to factory approval)
OUR WIDE SELECTION OF OPTIONS
Fin Materials.0045, .0055, .010 aluminum.0045, .0055 copper.0045, .0055 vinyl-coated aluminum
Fin Spacing*“F” Pattern = 4 to 14 fins per inch“K” Pattern = 8 to 14 fins per inch“R” Pattern = 8 to 18 fins per inch“A” Pattern = 12 to 24 fins per inch“S” Pattern = 12 to 24 fins per inch
Tube Material - Copper5/8” OD x .020 & .035 wall, smooth1/2” OD x .017 & .025 wall, smooth3/8” OD x .016 wall, smooth3/8” OD x .013 wall, enhanced (helical crosshatched)
Casings16 and 18 Ga. galvanized steelStainless steelAluminumCopper
*Call for other tube and fin pattern availability
High-Quality Cooling & Heating Coils
REPLACEMENT COILSOEM and Separate Sale
OUR QUALITY CONSTRUCTION
HeadersType “L” from 7/8” to 3 1/8” OD copper or seamless steel pipe
ARI Certified“F” Pattern – 5/8 “ OD x 1.50 x 1.299“R” Pattern – 1/2” OD x 1.25 x .781
ConnectionsWater and steam coils – Steel MPT connections or optional Victaulic grooved headersDX Distributors – Standard or hot gasDX, condenser and heat reclaim have copper sweat connectionsOptional copper connections – Threaded (MPT or FPT)
BrazingAll joints are hand brazed with silver-bearing copper brazing alloys
TestingAll coils are leak tested under water at 400 PSIG dry air
OptionsSpecial headers and casing designsSpecial coil configurationsWide range of tube and fin materials
• Copper• Aluminum• Stainless steel• Cupro-nickel
Heavy tube wallsProtective coatings
• E-Coat• Blygold• Heresite• Bronz-Glow
Additional distributorsNon-standard and intertwined circuiting (DX only)
TYPICAL WATER COIL
Literature Number 570-359
Designed tomeet yourapplicationneeds.
COIL SUPPORT HOTLINEFor additional information or technical assistance, call us at toll-free:1-800-225-COIL (2645) or email: [email protected]
TUBEPATTERNS
OUR FULL LINE OF PRODUCTS
Fluid Coils• Chilled and hot water• 1/2” and 5/8” available
Steam Coils• Standard and non-freeze• 5/8”and 1” available
Refrigerant Coils• Condenser and evaporator• 3/8”, 1/2” and 5/8” available
Booster Coils• 1/2” and 5/8” available• Quick-ship delivery of most common sizes
Standard lead-time 3-4 weeks
Premium FAST Ship Options:• 10 and 5 day shipments• 2 day emergency shipment
(Subject to factory approval)
OUR WIDE SELECTION OF OPTIONS
Fin Materials.0045, .0055, .010 aluminum.0045, .0055 copper.0045, .0055 vinyl-coated aluminum
Fin Spacing*“F” Pattern = 4 to 14 fins per inch“K” Pattern = 8 to 14 fins per inch“R” Pattern = 8 to 18 fins per inch“A” Pattern = 12 to 24 fins per inch“S” Pattern = 12 to 24 fins per inch
Tube Material - Copper5/8” OD x .020 & .035 wall, smooth1/2” OD x .017 & .025 wall, smooth3/8” OD x .016 wall, smooth3/8” OD x .013 wall, enhanced (helical crosshatched)
Casings16 and 18 Ga. galvanized steelStainless steelAluminumCopper
*Call for other tube and fin pattern availability
Replacement Components Division. © Carrier Corporation 6/05Manufacturer reserves the right to make changes to products and specifications
CONNECTIONS (L.H. & R.H. AIR FLOW)
.781
1.25
1/2” OD Tube - “R” Pattern
1.299
1.50
5/8” OD Tube - “F” Pattern
.750
1.00
3/8” OD Tube - “S” Pattern
.866
1.00
3/8” OD Tube - “A” Pattern
1.0825
1.25
1/2” OD Tube - “K” Pattern
High-Quality Cooling & Heating Coils
REPLACEMENT COILSOEM and Separate Sale
OUR QUALITY CONSTRUCTION
HeadersType “L” from 7/8” to 3 1/8” OD copper or seamless steel pipe
ARI Certified“F” Pattern – 5/8 “ OD x 1.50 x 1.299“R” Pattern – 1/2” OD x 1.25 x .781
ConnectionsWater and steam coils – Steel MPT connections or optional Victaulic grooved headersDX Distributors – Standard or hot gasDX, condenser and heat reclaim have copper sweat connectionsOptional copper connections – Threaded (MPT or FPT)
BrazingAll joints are hand brazed with silver-bearing copper brazing alloys
TestingAll coils are leak tested under water at 400 PSIG dry air
OptionsSpecial headers and casing designsSpecial coil configurationsWide range of tube and fin materials
• Copper• Aluminum• Stainless steel• Cupro-nickel
Heavy tube wallsProtective coatings
• E-Coat• Blygold• Heresite• Bronz-Glow
Additional distributorsNon-standard and intertwined circuiting (DX only)
Related Documents
