current limiting device for single and two-circuit track
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LITREG16All specifications subject to change without notice. Copyright Conservation Technology of Illinois, LLC ©2017
Over 5,000 products, including many high performance products that can’t be found anywhere else.
Our EcoTechnology products offer sustainable energy solutions that meet the qualitative needs of the visual environ-ment with the least impact on the physical environment.
We use the best components and manufacturing methods resulting in the highest quality fixtures. For consistency, we use only the most reliable LED chip makers including Cree, Nichia, Lumileds, Bridgelux and Sharp.
Our responsive, personalized customer focus, and market expertise represents an oasis of outstanding service in an industry that values it, but frequently doesn’t receive it. We are here for you, live and in person, Monday through Friday 7:30am – 5:30pm CST.
™Our products are in stock and ready to ship. Our unique SpeedShip™ process helps us toward our goal of shipping 100% of placed orders within 48 hours; at no additional cost to you.
Each market has its own unique lighting challenges. We have an experienced staff of sales professionals to assist you with your projects from concept to completion.
725 Landwehr RoadNorthbrook, Illinois 60062www.contechlighting.comPhone: 847.559.5500
current limiting devicefor single and two-circuit track
A line voltage track power feed that limits the amount of electrical load placed on a track run with an integral circuit breaker. Fifteen different amperages allow you to meet almost any power requirement.
• Available for single circuit, two circuit, or 2C/2N track. Single end feed or double in-line feed; T24 compliant models standard with 1' (12") track. To add additional track length, an LA-2 Conductive Mini-Connector, or other track connector, must be used. Connectors sold separately.
• Plastic Polycarbonate Lexan™ wire cover; galvanized steel mounting plate. Available in black, white or silver.
• 7/8" diameter pryouts for electrical feed, (2) are offset to accommodate grid ceiling runners. Oval mounting holes on 3-1/2" centers secure connector to junction box or mounting surface. Ground terminals for supply ground wire, center pryout allows feeding from junction box.
• Basic track connector has contacts keyed to maintain proper polarity with track.
• Tamper proof steel mounting screws secure cover to plate. Tamper proof locking screw mechanically secures connector into track.
• Fifteen different breaker ratings to customize your design (sold separately). May be used as a standard ON/OFF switch.
• Illuminated rocker switch is easily seen from floor level to confirm that power is being supplied to track circuit.
• Quick connect blade terminals; easy connection to inlcuded pigtails; breaker snaps into the power feed without the use of tools.
• Can be used with suspended track systems.• cULus listed.
This design enables the end user to be charged only the maximum wattage of the breaker, not the standard 45W per linear foot of track as stated in the Title 24 Code.
The Regulator conforms to Section 130.C.3 of the 2008 California Electrical Code (Title 24):
(c) Luminaire power. Luminaire wattage incorporated into the installed lighting power shall be determined in accordance with the following criteria:
...
3. The wattage of line-voltage lighting track and plug-in busway which allows the addition or relocation of luminaires without altering the wiring of the system shall be the volt-ampere rating of the branch circuit feeding the luminaires or an integral current limiter controlling the luminaires, or the higher of the maximum relamping rated wattage of all the luminaires included in the system, listed on a permanent factory-installed label, as specified by UL 1574 or UL 1598.
Ground Terminal
Lead for Hot from Distribution Panel
Terminal forNeutral from
Distribution Panel
Ground Terminal
IlluminatedRocker SwitchIllumination
Conductor(with Resistor)
Finish
B - BlackP - WhiteS - Silver
Finish
B - BlackP - WhiteS - Silver
Circuit Breaker (120V)
REG0.05 - 60W, 0.5A REG1 - 120W, 1A REG2 - 210W, 1.75A REG21 - 240W, 2A REG3 - 300W, 2.5A REG4 - 360W, 3A REG5 - 480W, 4A REG6 - 600W, 5A REG7 - 720W, 6A REG8 - 840W, 7A REG9 - 900W, 7.5AREG91 - 960W, 8A REG10 - 1200W, 10A REG12 - 1440W, 12A REG14 - 1680W, 14A
1. To add additional track length, an LA-2 Conductive Mini-Connector, or other track connector, must be used. Connectors sold separately.2. ConTech Lighting does not carry 277V Circuit Breakers; these may be purchased through an Airpax Sensata distributor.
Power Canopy
LA-23-R: T24 Single Circuit End Feed, 1' Attached Track¹LA-23T-R: T24 Single Circuit Thin End Feed, 1' Attached Track¹LA-33-R: T24 Single Circuit In-Line Feed, 1' Attached Track¹LA-223-R: T24 Two Circuit End Feed, 1' Attached Track¹LA-233-R: T24 Two Circuit In-Line Feed, 1' Attached Track¹
LA-23-RN: Single Circuit End Feed LA-23T-RN: Single Circuit Thin End Feed LA-33-RN: Single Circuit In-Line Feed LA-223-RN: Two Circuit End Feed LA-233-RN: Two Circuit In-Line Feed
NTEK11CB: 2C/2N 120V End FeedNHTEK11CB: 2C/2N 277V End Feed²NTEK12CB: 2C/2N 120V End Feed, Reverse PolarityNHTEK12CB: 2C/2N 277V End Feed, Reverse Polarity²
Single/Two Circuit In-Line Feed Current Limiting Device
LA-33-RN, LA-233-RN
Single/Two Circuit End Feed Current Limiting Device
LA-23-RN, LA-33-RN, LA-223-RN, LA-233-RN
Single Circuit Thin End Feed Current Limiting Device
LA-23T-RN
Single/Two Circuit In-Line Feed T24 Current Limiting Device
LA-33-R, LA-233-R
Single/Two Circuit End Feed T24 Current Limiting Device
LA-23-R, LA-33-R, LA-223-R, LA-233-R
Single Circuit Thin End Feed T24 Current Limiting Device
LA-23T-R
2C/2N End Feed Current Limiting Device
NTEK11CB, NHTEK11CB, NTEK12CB, NHTEK12CB
LINE
1-1/2"
2"
3/8" 1/8"
1-1/2"
3/4"
1A/1
20W
1-7/8"
5"
5"
5"
5"
5"
1-7/8"
5"
5"
12"
5"
5"
12"12"
5"
5"
5"
1-7/8"
A line voltage track power feed that limits the amount of electrical load placed on a track run with an integral circuit breaker. Fifteen different amperages allow you to meet almost any power requirement.
• Available for single circuit, two circuit, or 2C/2N track. Single endfeed or double in-line feed; T24 compliant models standard with 1'(12") track. To add additional track length, an LA-2 ConductiveMini-Connector, or other track connector, must be used.Connectors sold separately.
• Plastic Polycarbonate Lexan™ wire cover; galvanized steelmounting plate. Available in black, white or silver.
• 7/8" diameter pryouts for electrical feed, (2) are offset toaccommodate grid ceiling runners. Oval mounting holes on 3-1/2"centers secure connector to junction box or mounting surface.Ground terminals for supply ground wire, center pryout allowsfeeding from junction box.
• Basic track connector has contacts keyed to maintain properpolarity with track.
• Tamper proof steel mounting screws secure cover to plate. Tamperproof locking screw mechanically secures connector into track.
• Fifteen different breaker ratings to customize your design (sold separately). May be used as a standard ON/OFF switch.
• Illuminated rocker switch is easily seen from floor level to confirmthat power is being supplied to track circuit.
• Quick connect blade terminals; easy connection to inlcuded pigtails;breaker snaps into the power feed without the use of tools.
• Can be used with suspended track systems.• cULus listed.
This design enables the end user to be charged only the maximum wattage of the breaker, not the standard 45W per linear foot of track as stated in the Title 24 Code.
The Regulator conforms to Section 130.C.3 of the 2008 California Electrical Code (Title 24):
(c) Luminaire power.Luminaire wattage incorporated into the installed lighting powershall be determined in accordance with the following criteria:
...
3. The wattage of line-voltage lighting track and plug-in buswaywhich allows the addition or relocation of luminaires withoutaltering the wiring of the system shall be the volt-ampere ratingof the branch circuit feeding the luminaires or an integralcurrent limiter controlling the luminaires, or the higher of themaximum relamping rated wattage of all the luminairesincluded in the system, listed on a permanent factory-installedlabel, as specified by UL 1574 or UL 1598.
Ground Terminal
Lead for Hot from Distribution Panel
Terminal forNeutral from
Distribution Panel
Ground Terminal
IlluminatedRocker SwitchIllumination
Conductor(with Resistor)
Finish
B - BlackP - WhiteS - Silver
Finish
B - BlackP - WhiteS - Silver
Circuit Breaker (120V)
REG0.05 - 60W, 0.5A REG1 - 120W, 1A REG2 - 210W, 1.75A REG21 - 240W, 2A REG3 - 300W, 2.5A REG4 - 360W, 3A REG5 - 480W, 4A REG6 - 600W, 5A REG7 - 720W, 6A REG8 - 840W, 7A REG9 - 900W, 7.5AREG91 - 960W, 8A REG10 - 1200W, 10A REG12 - 1440W, 12A REG14 - 1680W, 14A
1. To add additional track length, an LA-2 Conductive Mini-Connector, or other track connector, must be used. Connectors sold separately.2. ConTech Lighting does not carry 277V Circuit Breakers; these may be purchased through an Airpax Sensata distributor.
Power Canopy
LA-23-R: T24 Single Circuit End Feed, 1' Attached Track¹LA-23T-R: T24 Single Circuit Thin End Feed, 1' Attached Track¹LA-33-R: T24 Single Circuit In-Line Feed, 1' Attached Track¹LA-223-R: T24 Two Circuit End Feed, 1' Attached Track¹LA-233-R: T24 Two Circuit In-Line Feed, 1' Attached Track¹
LA-23-RN: Single Circuit End Feed LA-23T-RN: Single Circuit Thin End Feed LA-33-RN: Single Circuit In-Line Feed LA-223-RN: Two Circuit End Feed LA-233-RN: Two Circuit In-Line Feed
NTEK11CB: 2C/2N 120V End FeedNHTEK11CB: 2C/2N 277V End Feed²NTEK12CB: 2C/2N 120V End Feed, Reverse PolarityNHTEK12CB: 2C/2N 277V End Feed, Reverse Polarity²
Single/Two Circuit In-Line Feed Current Limiting Device
LA-33-RN, LA-233-RN
Single/Two Circuit End Feed Current Limiting Device
LA-23-RN, LA-33-RN, LA-223-RN, LA-233-RN
Single Circuit Thin End Feed Current Limiting Device
LA-23T-RN
Single/Two Circuit In-Line Feed T24 Current Limiting Device
LA-33-R, LA-233-R
Single/Two Circuit End Feed T24 Current Limiting Device
LA-23-R, LA-33-R, LA-223-R, LA-233-R
Single Circuit Thin End Feed T24 Current Limiting Device
LA-23T-R
2C/2N End Feed Current Limiting Device
NTEK11CB, NHTEK11CB, NTEK12CB, NHTEK12CB
LINE
1-1/2"
2"
3/8" 1/8"
1-1/2"
3/4"
1A/1
20W
1-7/8"
5"
5"
5"
5"
5"
1-7/8"
5"
5"
12"
5"
5"
12"12"
5"
5"
5"
1-7/8"
LITREG16All specifications subject to change without notice. Copyright Conservation Technology of Illinois, LLC ©2017
Over 5,000 products, including many high performance products that can’t be found anywhere else.
Our EcoTechnology products offer sustainable energy solutions that meet the qualitative needs of the visual environ-ment with the least impact on the physical environment.
We use the best components and manufacturing methods resulting in the highest quality fixtures. For consistency, we use only the most reliable LED chip makers including Cree, Nichia, Lumileds, Bridgelux and Sharp.
Our responsive, personalized customer focus, and market expertise represents an oasis of outstanding service in an industry that values it, but frequently doesn’t receive it. We are here for you, live and in person, Monday through Friday 7:30am – 5:30pm CST.
™Our products are in stock and ready to ship. Our unique SpeedShip™ process helps us toward our goal of shipping 100% of placed orders within 48 hours; at no additional cost to you.
Each market has its own unique lighting challenges. We have an experienced staff of sales professionals to assist you with your projects from concept to completion.
725 Landwehr RoadNorthbrook, Illinois 60062www.contechlighting.comPhone: 847.559.5500
current limiting devicefor single and two-circuit track
Related Documents
