REDUCE VIBRATIONS & INCREASE PRODUCTIVITY STEADYLINE ® FOR TURNING, BORING & MILLING
REDUCE VIBRATIONS &INCREASE PRODUCTIVITY
STEADYLINE®
FOR TURNING, BORING & MILLING
2
When using long overhang tools to machine difficult-to-access areas, such as deep cavities or sections of large, complex monolithic workpieces, vibration often becomes an issue. Unless, you use the patented Steadyline® damped tooling from Seco®.
Steadyline® products, which include cost-effective milling holders as well as turning and boring bars, perform typical long overhang operations twice as fast as traditional tools. Plus, these highly productive vibration-damping solutions offer high metal-removal rates, smooth part surface finishes and long tool life – all while reducing machine tool stress.
In addition to using Steadyline® products to optimise your processes, you can also rely on our applications expertise – which encompasses all metal- working industry segments – to further strengthen your competitive advantage. Overall, when you work with Seco®, you experience a true partnership based on trust, respect and communication. With 4,100 team members in over 40 countries, we are a globally networked resource that is dedicated to solving your challenges and supporting your operations.
Visit secotools.com for all the latest information, machining data, manufactur- ing techniques and other developments on Steadyline® products.
OVERCOME TOOL OVERHANG CHALLENGES
Introduction ..............................3Vibration challenges .................4Principle of Steadyline® ............5
Turning and Boring Steadyline® turning range ........6Case studies turning ................10
Turning - catalogue pagesSteadyline® turning .................12Steadyline® thread turning .....52Steadyline® MDT .....................57
BoringBoring head solutions .... ........61 GL & BA heads for rough boring ...........................62GL & BA heads for fine boring ...............................65
Milling Steadyline® milling range .......68Case studies milling ................69Milling - catalogue pagesShell mill holders ....................70 Custom Tooling ......................87
3
Negative effects of vibrations include:• Poor surface quality • Unacceptable inaccuracy• Excessive noise• Disproportionate tool wear• Machine tool damage (e.g. spindle, etc.)• Reduced material removal rate• Increased costs from longer production time• Waste of both scrap material and energy
Steadyline® vibration damping holders drastically improve the dynamic rigidity of milling, turning and boring assemblies. This allows the use of much higher cutting data, with quieter operation and optimum stability.
Through a patented passive-dynamic damping system, Steadyline® increases productivity, improves surface finish and boosts both tool and spindle life. Incorporating Steadyline® into your operations will increase output and reduce operating cost.
As large, complex workpieces with deep cavities have become more common, manufacturers must contend with machining difficult-to-access features that require tools with long overhangs. Traditional approaches are not economi-cally acceptable in these scenarios, as high levels of vibration impact the cutting process.
ACHIEVING STABLE CONDITIONS
OUR SOLUTION: STEADYLINE®
IMPACT OF MACHINING VIBRATIONS
UNDERSTANDING YOUR CHALLENGES
VIBRATIONCHALLENGES
Machined with a conventional holder, equivalent dimension
Machined with Steadyline®
4
Conventional holder Holder with anti-vibration system
PRINCIPLE OF STEADYLINE®
In the Steadyline® system the vibration absorber is positioned where deflec-tion is highest, at the front of the bar. The absorber damps vibrations as soon as they are transmitted from the cutting tool to the body of the bar. This pre-vents them from spreading along the bar, thus limiting the deflection of the tool. The result is greater rigidity that ensures high stability even with extreme cutting conditions that dramatically increase the chip removal rate.
SIMPLE AND EFFICIENT
STEADYLINE® OPERATING PRINCIPLE
DAMPING BEHAVIOUR
This data represents measurements of the maximum depth at which the holder is stable, at different speeds. At a given speed, the Steadyline® holder’s optimal depth of cut (a
p) can be 2 to 4 times higher than what would be used
with a modular system, and the surface finish is improved dramatically. Higher RPMs can also be reached in stable conditions.
COMPARISON BETWEEN A CLASSIC MODULAR SYSTEM AND A STEADYLINE® HOLDER
Higher cutting depth --> increased productivity
5
Steadyline damping behaviour
JET GL turning heads
FLEXIBLE & EFFICIENT TOOL CHANGE SYSTEM
TURNING RANGE WITH A MODULAR CONNECTION (GL & BA)
TURNING & BORING
STEADYLINE® BAR• A variety of Steadyline™ bars, to cover a wide range of customer applications• Available in seven metric sizes: ø25, ø32 mm, ø40 mm, ø50 mm, ø60 mm, ø80 mm and ø100 mm, and equivalent imperial sizes 1.0“, 1.25“, 1.5“, 2.0“, 2.5“, 3.0“, 4.0“• Available in three lengths: 6xD, 8xD, 10xD• Shank connection: Seco-Capto™, HSK-T/A and cylindrical
GL TURNING HEADS AND GL CONNECTIONGL turning heads offer a compact, flexible and modular tool changing system for internal applications, especially for Steadyline® boring and turning. The GL connection is based on a precisely ground ‘tapered quadrilobe’ centering system, firmly locked with a fine pitched nut to the Steadyline® bar.
The compact GL turning head preserves the damping strength of the Steadyline® system, making it one of the most stable solutions on the market for tool overhang challenges by reducing vibrations and increasing productivity.
JET STREAM TOOLING® GL TURNING HEADSThe JET GL turning head provides the Steadyline® system with further flexibility and efficiency with its integrated Jetstream Tooling® capability. JET GL turning heads use a multifunction coolant clamp for successful inte-gration.
• More than 190 GL-Heads including threading and Grooving Heads• Available in four connection sizes: GL25, GL32, GL40, GL50• Cutting directions: left and right• Negative inserts for roughing: CN, DN, WN, VN• Positive inserts for finishing: CC, DC, TC, VB• CBN inserts: RN, TN, CN• 28 GL-Threading heads • 18 GL-Grooving Heads (MDT) Jetstream Integrated• 40 Jet GL turning heads
Modular connection:GL25, GL32, GL40, GL50, BA060, BA80, BA100
Body sizes:ø25, ø32, ø40, ø50, ø60, ø80, ø100 mm
Lengths: 6xD, 8xD, 10xD
Shank connection:Machine side connections: cylindrical shanks, Seco-CaptoTM, HSK-T/A
Broad choice of turning, boring, threading and MDT grooving heads
6
Coolant clamp
BA connection for Steadyline® bars ø60, ø80, ø100 mm
TURNING & BORING
BA-CONNECTIONOn larger sizes of Steadyline® bars (from ø60 mm), BA-to-GL adapters are used to mount GL50 turning heads. Therefore, tool inventory can be reduced as current GL50 turning heads can be mounted on larger size Steadyline® bars.
BA-to-GL adapters are available with two offset dimensions: a short one for mi-nimum bore size requirements, and a wider one to create additional chip space between the bar and the inside diameter of the bore.
• Available in: metric: ø60 mm, ø80 mm and ø100 mm inch: ø2,5” and ø3.00”• Each has two offset sizes for lower bore sizes and additional chip space• Flexibility for chip space and minimum bore diameter• Using existing GL50 turning heads for reduced tool inventory CUSTOMER BENEFITS • STABLE: The compact and short GL turning heads enhance the damping function by remaining close to the Steadyline® damping mass.• MODULAR: Inventory reduction can be achieved using different types and styles of Steadyline® bars equipped with suitable GL turning heads.• ACCURATE: The taper quadrilobe coupling produces a strong self-centering connection with repeatability within ±0.002 mm with identical conditions.• EFFICIENT: Ensures a quick and firm connection, which drastically decreases head-changing time and increases productivity.• FLEXIBLE: The quadrilobe design enables 180-degree orientation changes to the turning head, allowing left- and right-hand tools depending on the machining system.• LONGEVITY: Jetstream Tooling provides enhanced chip breaking and higher tool life, especially when machining superalloys.
Steadyline bars with HSK-T/A and Seco-Capto™ machine side connection are also designed for rotating, boring applications. Rough and fine boring heads with GL or BA machine side connections are available. For more details, please visit the chapter ”Boring.“ The cylindrical bar dia. 25mm and 1“, with the longest 10xD overhang (D25-230-GL25-CR and DA16-9.25-GL25-CR) feature a carbide reinforced cylindrical shank to increase the rigidity of this small diameter, 10xD bars.
7
GL-Threading head GL-Grooving head (MDT)
GL 25 carbide reinforced cylindrical bar
TURNING & BORING
OPTIMISING YOUR RETURN ON INVESTMENT
TURNING RANGE SELECTION
To achieve perfect application processes with Steadyline®, Seco® offers a wide range of inserts for turning, threading and grooving. Our inserts include adapted chip-breaker geometries and a selection of solid carbide grades and PCBN, ensuring a perfect match for every application. This versatility boosts productivity and allows manufacturers to adopt greater degrees of flexibility in their processes when machining materials ranging from aluminium to hardened steel.
8
RANGE SELECTION
0
1
2
3
Ø 25 Ø 32 Ø 40 Ø 50 Ø 60 Ø 80 Ø 100
HSK-T/A63
HSK-T/A100
C5
C6
Cyl 40 mm
Cyl 1,50’’
HSK-T/A63
HSK-T/A100
C5
C6
Cyl 40 mm
Cyl 1,5’’
HSK-T/A100
C5
C6
C8
Cyl 40 mm
Cyl 1,5’’
HSK-T/A63
HSK-T/A100
C6
C8
Cyl 50 mm
Cyl 2’’
HSK-T/A100
C6
C8
Cyl 50 mm
Cyl 2’’
HSK-T/A100
C8
Cyl 80 mm
Cyl 3,00’’
HSK-T/A100
C8
Cyl 80 mm
Cyl 3,00’’
Cyl 100 mm
Cyl 4,00’’
HSK-T/A63
HSK-T/A100
C4
C5
C6
Cyl 32 mm
Cyl 1,25’’
10 x D
8 x D
6 x D
HSK-T/A63
HSK-T/A100
C4
C5
C6
C8
Cyl 32 mm
Cyl 1,25’’
HSK-T/A100
C5
C6
C8
Cyl 32 mm
Cyl 1,25’’
HSK-T/A63
HSK-T/A100
C6
C8
Cyl 50 mm
Cyl 2’’
HSK-T/A100
C6
C8
Cyl 60 mm
Cyl 2,5’’
HSK-T/A100
C6
C8
HSK-T/A100
C8
Cyl 60 mm
Cyl 2,5’’
HSK-T/A63
C4
C5
C6
Cyl 25 mm
Cyl 1,00’’
HSK-T/A63
C4
C5
C6
Cyl 25 mm
Cyl 1,00’’
HSK-T/A63
C5
C6
Cyl 25 mm
Cyl 1,00’’
MACHINE CLAMPING RECOMMENDATIONS Our first recommendation for clamping the bars onto the machines is to use bars with Seco-Capto™ machine side connections.
Second choice is the bars with HSK-T/A machine side connections, as both these solutions provide several benefits:• Maximum stability thanks to the taper-face system and higher bending resistance• High positioning accuracy of cutting edge, etc.
While using the third choice, the cylindrical bars, Seco® strongly recommend to clamp on the marked cylindrical clamping area ensuring the full 4xD clamping lengths using split sleeves / boring holders.
While preparing your machine, ensure that your tool is correctly and safely clamped. Also note that it is important to never clamp directly onto the bar. For heavy, long bars used on machines with automatic tool changers, take the swinging torque into consideration.
TURNING & BORING
9
Seco-Capto™ clamping
Cylindrical clamping
CASE STUDIESTURNING
10
6xD - CASE 1
10xD - CASE 1
8xD - CASE 1
6xD - CASE 2
8xD - CASE 2
10xD - CASE 2
Operation: Grooving + internal turning
Tooling: C6-D32-160-GL32, GL32-CGHR-27032-1604JET
Insert: LCMF1604M0-0400-MP, CP500
Coolant: Internal
Material: SS1672 - DIN: CK45
Cutting vc ar
data Metric 180 m/min 10 mm of depth
1: grooving ap f
Metric 4 mm 0.15 mm/rev
2: turning ap f
internal Metric 1.5 mm 0.25 mm/rev
Results Process stability for 6 x D
Operation: Grooving + internal turning
Tooling: C6-D32-224-GL32, GL32-CGHR-27032-1604JET
Insert: LCMF1604M0-0400-MP, TGP25
Coolant: Internal
Material: SS1672 - DIN: CK45
Cutting vc ar
data Metric 180 m/min 10 mm
1: grooving ap f
Metric 4 mm 0.15 mm/rev
2: turning vc= 250 m/min f
internal Metric ap=1.5 mm 0.25 mm/rev
Results Stability for 8 x D
Operation: Internal turning roughing
Tooling: D60-541-BA060, BA060-05-27-GL50,
GL50-DDUNR-32032-15
Insert: DNMG150608-M3, TP1501
Coolant: Internal
Material: 42CrMo4 SMG P5
Cutting vc f
data Metric 185 m/min 0.3 mm/rev
ap
Metric 2.5 mm
Results Process stability for 10 x D
Operation: Threading
Tooling: C6-D40-208-GL40, GL40-CNR-27037-27AHD
Insert: 27NR5.5ISO, CP500
Coolant: Internal
Material: SS1672 - DIN: CK45
Cutting vc Number of passes 16
data Metric 130 m/min 3.25 infeed
Results Reduction of number of passes
Operation: Roughing
Tooling: C6-D50-368-GL450, GL50-DCLNR-32032-12
Insert: CNMM120408-R4, TP2501
Coolant: Internal
Material: SS1672 - DIN: CK45
Cutting vc f
data Metric 250 m/min 0.2 mm/rev
ap
Metric 3.0 mm
Results Security for large cutting depths
Operation: Roughing
Tooling: C6-D50-468-GL50, GL50-DDUNR-32032-15
Insert: DNMG150608-M5, TP2501
Coolant: Internal
Material: SS1672 - DIN: CK45
Cutting vc f
data Metric 250 m/min 0.25 mm/rev
ap
Metric 4.0 mm
Results High chip removal rates for 10 x D
11
12
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® GL – Steadyline®, GL holders, body diameters 25, 32, 40, 50 mm HSK-T/A
Please check availability in current price and stock-list
Machine
side
Workpiece
side
Designation
Dimensions in mm
Max. RPM*
RFID
hole
Balan-
cingTaper
GL size
CTWS LF LB1 LB2 BD OAL LCOG
HSK-T/A 63GL25 HSKTA63-GL25-130-K 130,0 104,0 101,0 25,0 166,5 37,0 10000 1 PB 1,10
GL25 HSKTA63-GL25-180-K 180,0 154,0 151,0 25,0 216,5 57,7 8000 1 PB 1,30
GL25 HSKTA63-GL25-230-K 230,0 204,0 201,0 25,0 266,5 80,3 6000 1 PB 1,50
GL32 E9374-D32-160-GL32 160,0 134,0 128,0 32,0 197,4 58,9 10000 1 PB 1,60
GL32 E9374-D32-224-GL32 224,0 198,0 192,0 32,0 261,4 90,2 8000 1 PB 2,00
GL40 E9374-D40-208-GL40 208,0 182,0 176,0 40,0 246,4 92,8 8000 1 PB 2,70
GL40 E9374-D40-288-GL40 288,0 262,0 256,0 40,0 326,4 134,4 6000 1 PB 3,50
GL50 E9374-D50-268-GL50 268,0 242,0 240,5 50,0 307,4 131,8 6000 1 PB 4,80
GL50 E9374-D50-368-GL50 368,0 342,0 340,5 50,0 407,4 184,8 4000 1 PB 6,40
HSK-T/A 100GL32 E9376-D32-160-GL32 160,0 131,0 125,0 32,0 215,4 32,9 10000 1 PB 3,00
GL32 E9376-D32-224-GL32 224,0 195,0 189,0 32,0 279,4 55,0 8000 1 PB 3,40
GL32 E9376-D32-288-GL32 288,0 259,0 253,0 32,0 343,4 80,5 6000 1 PB 3,80
GL40 E9376-D40-208-GL40 208,0 179,0 173,0 40,0 264,4 62,8 8000 1 PB 4,10
GL40 E9376-D40-288-GL40 288,0 259,0 253,0 40,0 344,4 98,3 6000 1 PB 4,90
GL40 E9376-D40-368-GL40 368,0 339,0 333,0 40,0 424,4 139,8 5000 1 PB 5,80
GL50 E9376-D50-268-GL50 268,0 239,0 234,0 50,0 325,4 104,3 6000 1 PB 6,20
GL50 E9376-D50-368-GL50 368,0 339,0 334,0 50,0 425,4 154,3 4000 1 PB 7,80
GL50 E9376-D50-468-GL50 468,0 439,0 434,0 50,0 525,4 211,6 2500 1 PB 9,70
* Max. RPM only when used in rotating boring
For nut of GL
bore size
Replaceable end Torque key
GL25 – –
GL32 SL00-32 SL00-32.250
GL40 SL00-40 SL00-40.350
GL50 SL00-50 SL00-50.550
Accessories to be ordered separately
For nut of GL
bore size
Locking key
GL25 SL25
GL32 SL32
GL40 SL40
GL50 SL50
Spare Parts included in delivery
• With dynamic damping, ready to use
• With through coolant
• For GL turning and boring heads, see pages 29-49, 52-59
13
HSK-T/A
13
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® BA – Steadyline®, BA holders, body diameters 60 and 80 mm
• With dynamic damping, ready to use
• To hold BA to GL adapters with GL turning heads
• With through coolant
Machine side Workpiece
side
Designation
Dimensions in mm
Max. RPM*
RFID
hole
Balan-
cingTaper
BA size
CTWS LF BD LB1 LB2 OAL LCOG
HSK-T/A 100BA060 E9376-D60-301-BA060 301,0 60,0 256,0 251,0 351,0 133,1 4000 1 PB 8,90
BA060 E9376-D60-421-BA060 421,0 60,0 376,0 371,0 471,0 197,2 3000 1 PB 11,80
BA060 E9376-D60-541-BA060 541,0 60,0 496,0 491,0 591,0 260,6 2000 1 PB 14,50
BA080 E9376-D80-421-BA080 421,0 80,0 376,0 371,0 471,0 209,7 3000 1 PB 19,40
BA080 E9376-D80-581-BA080 581,0 80,0 536,0 531,0 631,0 295,5 2000 1 PB 31,70
* Max. RPM only when used in rotating boring
Please check availability in current price and stock-list
For Locking key
BA060 03H04
BA080 03H05
For Locking screw
BA060 90FQ4
BA080 90FQ52
Accessories to be ordered separately Spare Parts included in delivery
14
For nut of GL
bore size
Replaceable end Torque key
GL25 – –
GL32 SL00-32 SL00-32.250
GL40 SL00-40 SL00-40.350
GL50 SL00-50 SL00-50.550
For nut of GL
bore size
Locking key
GL25 SL25
GL40 SL40
GL50 SL50GL50 SL50
Machine
side
Workpiece
side
Designation
Dimensions in mm
Max. RPM*
RFID
hole
Balan-
cing
Seco-Capto™
shank size
GL size
CTWS LF LB1 LB2 BD OAL LCOG
C4GL25 C4-D25-130-GL25 130,0 110,0 107,0 25,0 158,5 51,8 10000 0 PB 0,80
GL25 C4-D25-180-GL25 180,0 160,0 157,0 25,0 208,5 77,2 8000 0 PB 1,00
GL32 C4-D32-160-GL32 160,0 140,0 137,0 32,0 189,4 74,7 10000 0 PB 1,20
GL32 C4-D32-224-GL32 224,0 204,0 201,0 32,0 253,4 109,2 8000 0 PB 1,70
C5GL25 C5-D25-130-GL25 130,0 110,0 107,0 25,0 164,5 41,8 10000 1 PB 0,90
GL25 C5-D25-180-GL25 180,0 160,0 157,0 25,0 214,5 65,1 8000 1 PB 1,10
GL25 C5-D25-230-GL25 230,0 210,0 207,0 25,0 264,5 89,8 6000 1 PB 1,30
GL32 C5-D32-160-GL32 160,0 140,0 136,0 32,0 195,4 65,2 10000 1 PB 1,40
GL32 C5-D32-224-GL32 224,0 204,0 200,0 32,0 259,4 98,5 8000 1 PB 1,80
GL32 C5-D32-288-GL32 288,0 268,0 264,0 32,0 323,4 133,6 6000 1 PB 2,20
GL40 C5-D40-208-GL40 208,0 188,0 184,0 40,0 244,4 98,3 8000 1 PB 2,50
GL40 C5-D40-288-GL40 288,0 268,0 264,0 40,0 324,4 140,9 6000 1 PB 3,30
GL40 C5-D40-368-GL40 368,0 348,0 344,0 40,0 404,4 187,4 5000 1 PB 4,30
C6GL25 C6-D25-130-GL25 130,0 105,0 102,0 25,0 172,5 30,4 10000 1 PB 1,30
GL25 C6-D25-180-GL25 180,0 155,0 152,0 25,0 222,5 49,3 8000 1 PB 1,50
GL25 C6-D25-230-GL25 230,0 205,0 202,0 25,0 272,5 70,2 6000 1 PB 1,70
GL32 C6-D32-160-GL32 160,0 135,0 129,0 32,0 203,4 52,1 10000 1 PB 1,80
GL32 C6-D32-224-GL32 224,0 199,0 193,0 32,0 267,4 82,2 8000 1 PB 2,20
GL32 C6-D32-288-GL32 288,0 263,0 257,0 32,0 331,4 114,9 6000 1 PB 2,60
GL40 C6-D40-208-GL40 208,0 183,0 177,0 40,0 252,4 86,4 8000 1 PB 2,90
GL40 C6-D40-288-GL40 288,0 263,0 257,0 40,0 332,4 127,5 6000 1 PB 3,70
GL40 C6-D40-368-GL40 368,0 343,0 337,0 40,0 412,4 173,1 5000 1 PB 4,60
GL50 C6-D50-268-GL50 268,0 243,0 238,0 50,0 313,4 126,6 6000 1 PB 5,00
GL50 C6-D50-368-GL50 368,0 343,0 338,0 50,0 413,4 179,4 4000 1 PB 6,60
GL50 C6-D50-468-GL50 468,0 443,0 438,0 50,0 513,4 238,5 2500 1 PB 8,50
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® GL – Steadyline®, GL holders, body diameters 25, 32, 40, 50 mm
Please check availability in current price and stock-list
* Max. RPM only when used in rotating boring
Seco-Capto™
Accessories to be ordered separately Spare Parts included in delivery
• With dynamic damping, ready to use
• With through coolant
• For GL turning and boring heads, see pages 29-49, 52-59
15
For nut of GL
bore size
Replaceable end Torque key
GL32 SL00-32 SL00-32.250
GL40 SL00-40 SL00-40.350
GL50 SL00-50 SL00-50.550
For nut of GL
bore size
Locking key
GL32 SL32
GL40 SL40
GL50 SL50
Machine
side
Workpiece
side
Designation
Dimensions in mm
Max. RPM*
RFID
hole
Balan-
cing
Seco-Capto™
shank size
GL size
CTWS LF LB1 LB2 BD OAL LCOG
C8GL32 C8-D32-224-GL32 224,0 191,0 181,0 32,0 277,5 58,2 8000 1 PB 3,20
GL32 C8-D32-288-GL32 288,0 255,0 245,0 32,0 341,5 84,7 6000 1 PB 3,60
GL40 C8-D40-288-GL40 288,0 255,0 245,0 40,0 341,5 102,1 6000 1 PB 4,70
GL40 C8-D40-368-GL40 368,0 335,0 325,0 40,0 422,5 144,0 5000 1 PB 5,60
GL50 C8-D50-268-GL50 268,0 235,0 225,0 50,0 323,5 107,6 6000 1 PB 5,90
GL50 C8-D50-368-GL50 368,0 335,0 325,0 50,0 423,5 158,1 4000 1 PB 7,50
GL50 C8-D50-468-GL50 468,0 435,0 425,0 50,0 523,4 215,6 2500 1 PB 9,40
Seco-Capto™
15
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® GL – Steadyline®, GL holders, body diameters 32, 40, 50 mm
* Max. RPM only when used in rotating boring
Please check availability in current price and stock-list
Accessories to be ordered separately Spare Parts included in delivery
• With dynamic damping, ready to use
• With through coolant
• For GL turning and boring heads, see pages 29-49, 52-59
16
Machine side Workpiece
side
Designation
Dimensions in mm
Max. RPM*
RFID
hole
Balan-
cing
Seco-Capto™
shank size
BA size
CTWS LF BD LB1 LB2 OAL LCOG
C6BA060 C6-D60-301-BA060 301,0 60,0 276,0 273,0 339,0 151,7 4000 1 PB 7,80
BA060 C6-D60-421-BA060 421,0 60,0 396,0 393,0 459,0 218,6 3000 1 PB 10,60
C8BA060 C8-D60-301-BA060 301,0 60,0 268,0 263,0 349,0 137,0 4000 1 PB 8,60
BA060 C8-D60-421-BA060 421,0 60,0 388,0 383,0 469,0 202,5 3000 1 PB 11,40
BA060 C8-D60-541-BA060 541,0 60,0 508,0 503,0 589,0 266,8 2000 1 PB 14,00
BA080 C8-D80-421-BA080 421,0 80,0 388,0 383,0 469,0 213,9 3000 1 PB 18,80
BA080 C8-D80-581-BA080 581,0 80,0 548,0 543,0 629,0 300,4 2000 1 PB 25,10
For Locking key
BA060 03H04
BA080 03H05
For Locking screw
BA060 90FQ4
BA080 90FQ52
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® BA – Steadyline®, BA holders, body diameters 60 and 80 mm
• With dynamic damping, ready to use
• To hold BA to GL adapters with GL turning heads
• With through coolant
Please check availability in current price and stock-list
* Max. RPM only when used in rotating boring
Seco-Capto™
Accessories to be ordered separately Spare Parts included in delivery
17
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
* D25...-CR holders feature carbide-reinforced bodies to increase the rigidity of small diameter bars with 10xD overhang
Machine
side
Workpiece
side
Designation
Dimensions in mm
TDZ Design
RFID
hole
DMM
mm
GL size
CTWS LS LF BD OAL LCOG
25GL25 D25-130-GL25 100,0 130,0 25,0 234,5 25,5 G 1/4 1 0 0,90
GL25 D25-180-GL25 100,0 180,0 25,0 284,5 52,8 G 1/4 2 0 1,10
GL25 D25-230-GL25-CR 75,0 230,0 25,0 309,5 70,2 M8x1 2 0 1,80
32GL32 D32-160-GL32 128,0 160,0 32,0 293,4 25,3 G 1/4 1 0 1,80
GL32 D32-224-GL32 128,0 224,0 32,0 357,5 60,2 G 1/4 1 0 2,30
GL32 D32-288-GL32 128,0 288,0 32,0 421,5 95,7 G 1/4 2 0 2,70
40GL40 D40-208-GL40 160,0 208,0 40,0 374,5 35,6 G 1/4 1 0 3,80
GL40 D40-288-GL40 160,0 288,0 40,0 454,5 78,3 G 1/4 1 0 4,60
GL40 D40-368-GL40 160,0 368,0 40,0 534,5 124,3 G 1/4 2 0 5,50
50GL50 D50-268-GL50 200,0 268,0 50,0 475,5 46,4 G 1/4 1 0 7,50
GL50 D50-368-GL50 200,0 368,0 50,0 575,5 99,0 G 1/4 1 0 9,10
GL50 D50-468-GL50 200,0 468,0 50,0 675,5 158,1 G 1/4 2 0 11,00
For nut of GL
bore size
Replaceable end Torque key
GL25 – –
GL25-CR – –
GL32 SL00-32 SL00-32.250
GL40 SL00-40 SL00-40.350
GL50 SL00-50 SL00-50.550
For nut of GL
bore size
Coolant adapter Locking key
GL25 – SL25
GL25-CR 904JET08G1/4L SL25
GL32 – SL32
GL40 – SL40
GL50 – SL50
Cylindrical
17
SECO EPB® GL – Steadyline®, GL holders, body diameters 25, 32, 40, 50 mm, steel or carbide
Please check availability in current price and stock-list
Accessories to be ordered separately Spare Parts included in delivery
Design 2*
Design 1
* Without flat
• With dynamic damping, ready to use
• With through coolant channel and coolant supply connecting
thread
• For GL turning and boring heads, see pages 29-49, 52-59
18
Machine
side
Workpiece
side
Designation
Dimensions in inch
TDZ Design
RFID
hole
DMM
inch
GL size
CTWS LS LF BD OAL LCOG
1.00GL25 DA16-5.25-GL25 5.25 5.25 1.00 9.43 1.03 G 1/4 1 0 1.98
GL25 DA16-7.25-GL25 7.25 7.25 1.00 11.43 2.12 G 1/4 2 0 2.43
GL25 DA16-9.25-GL25-CR 9.25 9.25 1.00 12.43 2.86 M8x1 2 0 3.97
1.25GL32 DA20-6.50-GL32 6.50 6.50 1.26 11.71 1,.14 G 1/4 1 0 3.97
GL32 DA20-9.00-GL32 9.00 9.00 1.26 14.21 2.51 G 1/4 1 0 5.07
GL32 DA20-11.50-GL32 11.50 11.50 1.26 16.71 3.89 G 1/4 2 0 5.95
1.50GL40 DA24-8.00-GL40 8.00 8.00 1.57 14.25 1.62 G 1/4 1 0 7.72
GL40 DA24-11.00-GL40 11.00 11.00 1.57 17.25 3.24 G 1/4 1 0 9.48
GL40 DA24-14.00-GL40 14.00 14.00 1.57 20.25 4.99 G 1/4 2 0 11.46
2.00
GL 50 DA32-10.50-GL50 10.50 10.50 1.97 18.79 1.67 G 1/4 1 0 16.76
GL 50 DA32-14.50-GL50 14.50 14.50 1.97 22.79 3.76 G 1/4 1 0 20.28
GL 50 DA32-18.50-GL50 18.50 18.50 1.97 26.79 6.11 G 1/4 2 0 24.47
For nut of GL
bore size
Replaceable end Torque key
GL25 – –
GL25-CR – –
GL32 SL00-32 SL00-32.250
GL40 SL00-40 SL00-40.350
GL50 SL00-50 SL00-50.550
For nut of GL
bore size
Collant adapter Locking key
GL25 – SL25
GL25-CR 904JET08G1/4L SL25
GL32 – SL32
GL40 – SL40
GL50 – SL50
CylindricalSECO EPB® GL – Steadyline®, GL holders, body diameters 1,00; 1,25; 1,50; 2,00; steel or carbide
• With dynamic damping, ready to use
• With through coolant channel and coolant supply connecting
thread
• For GL turning and boring heads, see pages 29-49, 52-59
Please check availability in current price and stock-list
Accessories to be ordered separately Spare Parts included in delivery
Design 2*
Design 1
* Without flat
18
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
* DA16...-CR holders feature carbide-reinforced bodies to increase the rigidity of small diameter bars with 10xD overhang
19
• With dynamic damping, ready to use
• To hold BA to GL adapters with GL turning heads
• With through coolant
Machine side Workpiece side
Designation
Dimensions in mm
RFID
hole
DMM
mm BA size LF BD LS OAL LCOG
60BA060 D60-301-BA060 301,0 60,0 240,0 541,0 50,1 0 12,50
BA060 D60-541-BA060 541,0 60,0 240,0 781,0 179,1 0 18,10
80BA080 D80-421-BA080 421,0 80,0 320,0 741,0 71,0 0 30,20
BA080 D80-741-BA080 741,0 80,0 320,0 1061,0 241,6 0 43,40
100BA100 D100-939-BA100 939,0 100,0 500,0 1439,0 271,9 0 84,66
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® BA – Steadyline®, BA holders, body diameters 60, 80 and 100 mm Cylindrical
Please check availability in current price and stock-list
For Locking key
BA060 03H04
BA080 03H05
BA100 03H06
For Locking screw
BA060 90FQ4
BA080 90FQ52
BA100 90FQ6
Accessories to be ordered separately Spare Parts included in delivery
20
Machine
side
Workpiece side
Designation
Dimensions in inch
RFID
hole
DMM
inch BA size LS LF BD OAL LCOG
2.50BA06I DA40-12.50-BA06I 10.00 12.50 2.50 22.50 1.96 0 32.41
BA06I DA40-22.50-BA06I 10.00 22.50 2.50 32.50 7.29 0 46.74
3.00BA08I DA48-15.50-BA08I 12.00 15.50 3.00 27.50 2.60 0 57.54
BA08I DA48-27.50-BA08I 12.00 27.50 3.00 39.50 9.05 0 83.11
4.00BA100 DA64-37.50-BA100 20.00 37.50 4.00 57.50 10.75 0 195.55
CylindricalSECO EPB® BA – Steadyline®, BA holders, body diameters 2,50; 3,00; 4,00
• With dynamic damping, ready to use
• With through coolant channel and coolant supply connecting
thread
20
Please check availability in current price and stock-list
For Locking key
BA06I 03H04
BA08I 03H05
BA100 03H06
For Locking screw
BA060 90FQ4
BA080 90FQ52
BA100 90FQ6
Accessories to be ordered separately Spare Parts included in delivery
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
21
Accessories to be ordered separately Spare Parts included in delivery
• To hold GL50 turning heads on Steadyline® BA holders,
see page 13, 16, 19
• Each adapter size available with 2 radial offset sizes WF:
when possible, preferably use the widest offset
• With through coolant
Machine side Workpiece side
Designation
Dimensions in mm
RFID
holeGL size WF LF DF BD LB LS OAL LCOG
BA060GL50 BA060-05-27-GL50 5,0 27,0 60,0 50,0 21,5 16,0 50,4 5,8 0 0,60
GL50 BA060-10-27-GL50 10,0 27,0 60,0 50,0 21,5 16,0 50,4 5,8 0 0,60
BA080GL50 BA080-15-27-GL50 15,0 27,0 80,0 50,0 21,5 22,0 56,4 1,4 0 0,90
GL50 BA080-23-27-GL50 23,0 27,0 80,0 50,0 21,5 22,0 56,4 1,4 0 0,90
BA100GL50 BA100-28-29-GL50 28,0 29,0 100,0 50,0 21,5 25,0 61,4 1,4 0 1,5
GL50 BA100-38-29-GL50 38,0 29,0 100,0 50,0 21,5 25,0 61,4 1,0 0 1,5
For Replaceable end Torque key
GL50 SL00-50 SL00-50.550
For Locking key
GL50 SL50
Please check availability in current price and stock-list
BA
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® BA – BA to GL adapters
22
BA
TURNING – STEADYLINE®, DAMPING HOLDERS FOR GL-HEADS
SECO EPB® BA – BA to GL adapters
• To hold GL50 turning heads on Steadyline® BA holders,
see page 20
• Each adapter size available with 2 radial offset sizes WF:
when possible, preferably use the widest offset
• With through coolant
22
Machine side Workpiece side
Designation
Dimensions in inch
RFID
holeGL size WF LF DF BD LB LS OAL LCOG
BA06IGL50 BA06I-06.75-27-GL50 0,27 1,07 2,50 1,97 0,85 0,63 1,99 0,23 0 2,21
GL50 BA06I-11.75-27-GL50 0,47 1,07 2,50 1,97 0,85 0,63 1,99 0,23 0 2,21
BA08IGL50 BA08I-13.10-27-GL50 0,52 1,07 3,00 1,97 0,85 0,87 2,23 0,06 0 1,99
GL50 BA08I-21.10-27-GL50 0,84 1,07 3,00 1,97 0,85 0,87 2,23 0,06 0 1,99
Please check availability in current price and stock-list
22
Accessories to be ordered separately Spare Parts included in delivery
For Replaceable end Torque key
GL50 SL00-50 SL00-50.550
For Locking key
GL50 SL50
23
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
09GL32-DCLCR-22032-09JET 32 32 22 40 0 -2 0,2 CC..09T3..
GL32-DCLCL-22032-09JET 32 32 22 40 0 -2 0,2 CC..09T3..
GL40
09GL40-DCLCR-27032-09JET 40 32 27 50 0 -2 0,2 CC..09T3..
GL40-DCLCL-27032-09JET 40 32 27 50 0 -2 0,2 CC..09T3..
GL50
09GL50-DCLCR-32032-09JET 50 32 32 63 0 -2 0,3 CC..09T3..
GL50-DCLCL-32032-09JET 50 32 32 63 0 -2 0,3 CC..09T3..
GL..-DCLCR/L
GL..-DCLCR/L
95 °
Right-hand version shown
KAPR = 95°
For Clamp key Clamp screw Coolant clamp Coolant seal Key (T-handle) O-ring Spring
GL32 H4B-T09P L84017-T09P CP14U00S-2 930RD13 DOUBLE-T O-RING-5.0X1.2 S5608
GL40 H4B-T09P L84017-T09P CP14U00S-2 930RD13 DOUBLE-T O-RING-5.0X1.2 S5608
GL50 H4B-T09P L84017-T09P CP14U00S-2 930RD13 DOUBLE-T O-RING-5.0X1.2 S5608
Clamp kit
CP14U00S-2-SET
CP14U00S-2-SET
CP14U00S-2-SET
Please check availability in current price and stock-list
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Toolholders for inserts CCGT, CCGW, CCMT and CCMW
• For inserts programme, see page(s) 411-415, 470, 498
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
Accessories to be ordered separately
24
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
12GL32-DCLNR-22032-12JET 32 32 22 40 -6 -10 0,2 CN..1204..
GL32-DCLNL-22032-12JET 32 32 22 40 -6 -10 0,2 CN..1204..
GL40
12GL40-DCLNR-27032-12JET 40 32 27 50 -6 -10 0,2 CN..1204..
GL40-DCLNL-27032-12JET 40 32 27 50 -6 -10 0,2 CN..1204..
GL50
12GL50-DCLNR-32032-12JET 50 32 32 63 -6 -8 0,3 CN..1204..
GL50-DCLNL-32032-12JET 50 32 32 63 -6 -8 0,3 CN..1204..
GL..-DCLNR/L
95 °
Right-hand version shown
KAPR = 95°
For Clamp screw Coolant clamp Coolant seal Insert shim Key (T-handle) O-ring Shim/clamp key Shim screw Spring
GL32 L85021-T15P CN17U00S-2 930RD13 DCO120310 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C04008-T15P S6912
GL40 L85021-T15P CN17U00S-2 930RD13 DCO120310 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C04008-T15P S6912
GL50 L85021-T15P CN17U00S-2 930RD13 DCO120310 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C04008-T15P S6912
Clamp kit
CN17U00S-2-SET
CN17U00S-2-SET
CN17U00S-2-SET
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Toolholders for inserts CNGG, CNMA, CNMG and CNMM
Please check availability in current price and stock-list
Spare Parts included in delivery
GL..-DCLNR/L
• For inserts programme, see page(s) 416-423, 471-472, 498
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
Accessories to be ordered separately
25
GL..-DDUCR/L
93 °
Right-hand version shown
KAPR = 93°
For Clamp key Clamp screw Coolant clamp Coolant seal Insert shim Key (T-handle) O-ring Shim key Shim screw Spring
GL32 H4B-T09P L84017-T09P CP14U00S-2 930RD13 126.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL40 H4B-T09P L84017-T09P CP14U00S-2 930RD13 126.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL50 H4B-T09P L84017-T09P CP14U00S-2 930RD13 126.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
Clamp kit
CP14U00S-2-SET
CP14U00S-2-SET
CP14U00S-2-SET
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
GL..-DDUCR/L
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-DDUCR-22032-11JET 32 32 22 40 0 -5 0,2 DC..11T3..
GL32-DDUCL-22032-11JET 32 32 22 40 0 -5 0,2 DC..11T3..
GL40
11GL40-DDUCR-27032-11JET 40 32 27 50 0 -5 0,2 DC..11T3..
GL40-DDUCL-27032-11JET 40 32 27 50 0 -5 0,2 DC..11T3..
GL50
11GL50-DDUCR-32032-11JET 50 32 32 63 0 -5 0,3 DC..11T3..
GL50-DDUCL-32032-11JET 50 32 32 63 0 -5 0,3 DC..11T3..
Please check availability in current price and stock-list
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
Accessories to be ordered separately
26
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-DDUNR-22032-11JET 32 32 22 40 -6 -10 0,2 DN..1104..
GL32-DDUNL-22032-11JET 32 32 22 40 -6 -10 0,2 DN..1104..
15GL32-DDUNR-22032-15JET 32 32 22 40 -6 -14 0,2 DN..1506..
GL32-DDUNL-22032-15JET 32 32 22 40 -6 -14 0,2 DN..1506..
GL40
11GL40-DDUNR-27032-11JET 40 32 27 50 -6 -10 0,2 DN..1104..
GL40-DDUNL-27032-11JET 40 32 27 50 -6 -10 0,2 DN..1104..
15GL40-DDUNR-27032-15JET 40 32 27 50 -6 -14 0,2 DN..1506..
GL40-DDUNL-27032-15JET 40 32 27 50 -6 -14 0,2 DN..1506..
GL50
15GL50-DDUNR-32032-15JET 50 32 32 63 -6 -14 0,4 DN..1506..
GL50-DDUNL-32032-15JET 50 32 32 63 -6 -14 0,4 DN..1506..
• For inserts programme, see page(s) 427-433, 474-476
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
GL..-DDUNR/L
GL..-DDUNR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts DNGG, DNGN, DNMA, DNMG, DNMM, DNMU and DNMX
For Clamp
key
Clamp
screw
Coolant
clamp
Coolant
seal
Insert
shim
Key
(T-handle)
O-ring Shim/clamp
key
Shim
key
Shim screw Spring
32-11 – L84017-T09P CN14U00S-2 930RD13 DDN110310 DOUBLE-T O-RING-5.0X1.2 H4B-T09P – C03007-T09P S5608
32R-15 H4B-T09P L84017-T09P CN14U10S-2R 930RD13 DDN150416 DOUBLE-T O-RING-5.0X1.2 – H4B-T15P C04008-T15P S5608
32L-15 H4B-T09P L84017-T09P CN14U10S-2L 930RD13 DDN150416 DOUBLE-T O-RING-5.0X1.2 – H4B-T15P C04008-T15P S5608
40-11 – L84017-T09P CN14U00S-2 930RD13 DDN110310 DOUBLE-T O-RING-5.0X1.2 H4B-T09P – C03007-T09P S5608
40-15 – L85021-T15P CN17U00S-2 930RD13 DDN150416 DOUBLE-T O-RING-5.0X1.2 H4B-T15P – C04008-T15P S6912
50-15 – L85021-T15P CN17U00S-2 930RD13 DDN150416 DOUBLE-T O-RING-5.0X1.2 H4B-T15P – C04008-T15P S6912
Clamp kit
CN14U00S-2-SET
CN14U10S-2R-SET
CN14U10S-2L-SET
CN14U00S-2-SET
CN17U00S-2-SET
CN17U00S-2-SET
Please check availability in current price and stock-list
Spare Parts included in deliveryAccessories to be ordered separately
27
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
16GL32-DVUBR-22032-16JET 32 32 22 40 0 -8 0,2 VB..1604..
GL32-DVUBL-22032-16JET 32 32 22 40 0 -8 0,2 VB..1604..
GL40
16GL40-DVUBR-27032-16JET 40 32 27 50 0 -3 0,2 VB..1604..
GL40-DVUBL-27032-16JET 40 32 27 50 0 -3 0,2 VB..1604..
GL50
16GL50-DVUBR-32032-16JET 50 32 32 63 0 -3 0,3 VB..1604..
GL50-DVUBL-32032-16JET 50 32 32 63 0 -3 0,3 VB..1604..
• For inserts programme, see page(s) 459-460, 493, 502
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
GL..-DVUBR/L
GL..-DVUBR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts VBGT, VBGW, VBMT and VBMW
For Clamp key Clamp screw Coolant clamp Coolant seal Insert shim Key (T-handle) O-ring Shim key Shim screw Spring
GL32..R H4B-T09P L84017-T09P CP14U20S-2R 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL32..L H4B-T09P L84017-T09P CP14U20S-2L 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL40..R H4B-T09P L84017-T09P CP14U20S-2R 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL40..L H4B-T09P L84017-T09P CP14U20S-2L 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL50..R H4B-T09P L84017-T09P CP14U20S-2R 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
GL50..L H4B-T09P L84017-T09P CP14U20S-2L 930RD13 171.19-620 DOUBLE-T O-RING-5.0X1.2 H4B-T15P C94006-T15P S5608
Clamp kit
CP14U20S-2R-SET
CP14U20S-2L-SET
CP14U20S-2R-SET
CP14U20S-2L-SET
CP14U20S-2R-SET
CP14U20S-2L-SET
Please check availability in current price and stock-list
Spare Parts included in deliveryAccessories to be ordered separately
28
TURNING – STEADYLINE®, GL-HEADS, INT. JETSTREAM TOOLING®
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
06GL32-DWLNR-22032-06JET 32 32 22 40 -5 -12 0,2 WN..0604..
GL32-DWLNL-22032-06JET 32 32 22 40 -5 -12 0,2 WN..0604..
GL40
06GL40-DWLNR-27032-06JET 40 32 27 50 -5 -12 0,2 WN..0604..
GL40-DWLNL-27032-06JET 40 32 27 50 -5 -12 0,2 WN..0604..
GL50
06GL50-DWLNR-32032-06JET 50 32 32 63 -5 -12 0,3 WN..0604..
GL50-DWLNL-32032-06JET 50 32 32 63 -5 -12 0,3 WN..0604..
• For inserts programme, see page(s) 465-469, 496-497
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For coolant clamps code key, see page(s) 21
• For damping holders programme, see page(s) 303-310
GL..-DWLNR/L
95 °
Right-hand version shown
KAPR = 95°
Toolholders for inserts WNGG, WNMA, WNMG and WNMM
For size Clamp screw Coolant clamp Coolant seal Insert shim Key (T-handle) O-ring Shim/clamp key Shim screw Spring
GL32 L84017-T09P CN14U00S-2 930RD13 DWN060310 DOUBLE-T O-RING-5.0X1.2 H4B-T09P C03007-T09P S5608
GL40 L84017-T09P CN14U00S-2 930RD13 DWN060310 DOUBLE-T O-RING-5.0X1.2 H4B-T09P C03007-T09P S5608
GL50 L84017-T09P CN14U00S-2 930RD13 DWN060310 DOUBLE-T O-RING-5.0X1.2 H4B-T09P C03007-T09P S5608
Clamp kit
CN14U00S-2-SET
CN14U00S-2-SET
CN14U00S-2-SET
Please check availability in current price and stock-list
Spare Parts included in delivery
GL..-DWLNR/L
Accessories to be ordered separately
29
TURNING – STEADYLINE®, GL-HEADS, INT.
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
09GL25-SCLCR-17020-09 25 20 17,0 32 0 -3 0,1 CC..09T3..
GL25-SCLCL-17020-09 25 20 17,0 32 0 -3 0,1 CC..09T3..
• For inserts programme, see page(s) 411-415, 470, 498-499
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SCLCR/L
95 °
Toolholders for inserts CCGT, CCGW, CCGX, CCMT and CCMW
For size Insert key Insert screw Key (T-handle)
-09 H4B-T15P C04008-T15P DOUBLE-T
Please check availability in current price and stock-list
Spare Parts included in delivery
GL..-SCLCR/L
Right-hand version shown
KAPR = 95°
30
TURNING – STEADYLINE®, GL-HEADS, INT.
Toolholders for inserts CCGT, CCGW, CCGX and CCMT
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
06GL32-SCLCR-22032-06 32 32 22,0 40 0 -2 0,1 CC..0602..
GL32-SCLCL-22032-06 32 32 22,0 40 0 -2 0,1 CC..0602..
09GL32-SCLCR-22032-09 32 32 22,0 40 0 -2 0,1 CC..09T3..
GL32-SCLCL-22032-09 32 32 22,0 40 0 -2 0,1 CC..09T3..
12GL32-SCLCR-22032-12 32 32 22,0 40 0 -8 0,1 CC..1204..
GL32-SCLCL-22032-12 32 32 22,0 40 0 -8 0,1 CC..1204..
GL40
06GL40-SCLCR-27032-06 40 32 27,0 50 0 -2 0,2 CC..0602..
GL40-SCLCL-27032-06 40 32 27,0 50 0 -2 0,2 CC..0602..
09GL40-SCLCR-27032-09 40 32 27,0 50 0 -2 0,2 CC..09T3..
GL40-SCLCL-27032-09 40 32 27,0 50 0 -2 0,2 CC..09T3..
12GL40-SCLCR-27032-12 40 32 27,0 50 0 -8 0,2 CC..1204..
GL40-SCLCL-27032-12 40 32 27,0 50 0 -8 0,2 CC..1204..
GL50
06GL50-SCLCR-32032-06 50 32 32,0 63 0 -2 0,3 CC..0602..
GL50-SCLCL-32032-06 50 32 32,0 63 0 -2 0,3 CC..0602..
09GL50-SCLCR-32032-09 50 32 32,0 63 0 -2 0,3 CC..09T3..
GL50-SCLCL-32032-09 50 32 32,0 63 0 -2 0,3 CC..09T3..
12GL50-SCLCR-32032-12 50 32 32,0 63 0 -5 0,3 CC..1204..
GL50-SCLCL-32032-12 50 32 32,0 63 0 -5 0,3 CC..1204..
• For inserts programme, see page(s) 411-415, 470, 498
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SCLCR/L
GL..-SCLCR/L
95 °
Right-hand version shown
KAPR = 95°
For size Insert key Insert screw Insert shim Key (T-handle) Shim screw
..-06 H4B-T07P C02506-T07P – DOUBLE-T –
..-09 H4B-T15P C04008-T15P – DOUBLE-T –
..-12 H4B-T15P C05012-T15P 123.19-621 DOUBLE-T CA5008
Shim key
–
–
5SMS795
Please check availability in current price and stock-list
Spare Parts included in delivery Accessories to be ordered separately
31
TURNING – STEADYLINE®, GL-HEADS, INT.
• For inserts programme, see page(s) 416-423, 471-472, 498
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-DCLNR/L
95 °
Right-hand version shown
KAPR = 95°
Toolholders for inserts CNGG, CNMA, CNMG and CNMM
Clamp kit
CD12-S12
CD16-S16
CD19-S19
GL..-DCLNR/L
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in deliveryAccessories to be ordered separately
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
12GL32-DCLNR-22032-12 32 32 22,0 40 -6 -10 0,2 CN..1204..
GL32-DCLNL-22032-12 32 32 22,0 40 -6 -10 0,2 CN..1204..
GL40
12GL40-DCLNR-27032-12 40 32 27,0 50 -6 -10 0,2 CN..1204..
GL40-DCLNL-27032-12 40 32 27,0 50 -6 -10 0,2 CN..1204..
GL50
12GL50-DCLNR-32032-12 50 32 32,0 63 -6 -8 0,3 CN..1204..
GL50-DCLNL-32032-12 50 32 32,0 63 -6 -8 0,3 CN..1204..
16GL50-DCLNR-32037-16 50 37 32,0 63 -5 -14 0,4 CN..1606..
GL50-DCLNL-32037-16 50 37 32,0 63 -5 -14 0,4 CN..1606..
19GL50-DCLNR-32040-19 50 40 32,0 63 -5 -14 0,4 CN..1906..
GL50-DCLNL-32040-19 50 40 32,0 63 -5 -14 0,4 CN..1906..
For size Clamp pin Clamp screw Floating wedge clamp Insert shim Key (T-handle) Shim/clamp key Shim screw Spring
..-12 FP2012 L85021-T15P CD12-S DCO120310 DOUBLE-T H4B-T15P C04008-T15P S6912
..-16 FP2012 L86026-T20P CD16-S DCN160616 DOUBLE-T H6B-T20P C05010-T20P S7010
..-19 FP2012 L86026-T20P CD19-S DCN190416 DOUBLE-T H6B-T20P C05010-T20P S7010
32
• For inserts programme, see page(s) 472
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
TURNING – STEADYLINE®, GL-HEADS, INT.
GL..-CCLNR/L
GL..-CCLNR/L
95 °
Right-hand version shown
KAPR = 95°
Toolholders for PCBN inserts CNMN
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL50
12GL50-CCLNR-32032-12 50 32 31,9 63 -6 -6 0,4 CNMN1204..
GL50-CCLNL-32032-12 50 32 31,9 63 -6 -6 0,4 CNMN1204..
For size Clamp Insert key Insert shim Key (T-handle) Pressure plate Shim screw
..-12 CC17P H4B-T09P CCN120312 DOUBLE-T P1311 F94009-T09P
33
TURNING – STEADYLINE®, GL-HEADS, INT.
Spare Parts included in delivery
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
Please check availability in current price and stock-list
GL..-SDUCR/L
GL..-SDUCR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
For size Insert key Insert screw Key (T-handle)
-07 H4B-T07P C02506-T07P DOUBLE-T
-11 H4B-T15P C04008-T15P DOUBLE-T
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
07GL25-SDUCR-17020-07 25 20 17 32 0 -6 0,1 DC..0702..
GL25-SDUCL-17020-07 25 20 17 32 0 -6 0,1 DC..0702..
11GL25-SDUCR-17020-11 25 20 17 32 0 -6 0,1 DC..11T3..
GL25-SDUCL-17020-11 25 20 17 32 0 -6 0,1 DC..11T3..
34
TURNING – STEADYLINE®, GL-HEADS, INT.
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDUCR/L
GL..-SDUCR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts DCGT, DCGW, DCMT and DCMX
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-SDUCR-22032-11 32 32 22,0 40 0 -5 0,1 DC..11T3..
GL32-SDUCL-22032-11 32 32 22,0 40 0 -5 0,1 DC..11T3..
GL40
11GL40-SDUCR-27032-11 40 32 27,0 50 0 -5 0,2 DC..11T3..
GL40-SDUCL-27032-11 40 32 27,0 50 0 -5 0,2 DC..11T3..
GL50
11GL50-SDUCR-32032-11 50 32 32,0 63 0 -5 0,3 DC..11T3..
GL50-SDUCL-32032-11 50 32 32,0 63 0 -5 0,3 DC..11T3..
For size Insert key Insert screw Key (T-handle)
..-11 H4B-T15P C04008-T15P DOUBLE-T
35
TURNING – STEADYLINE®, GL-HEADS, INT.
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
Spare Parts included in delivery
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
Please check availability in current price and stock-list
GL..-SDUCR/L
GL..-SDUCR/L
93 °
Right-hand version shown
KAPR = 93°
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
11GL25-SDUCR-17012-11X 25 12 17 32 0 -6 0,1 DC..11T3..
GL25-SDUCL-17012-11X 25 12 17 32 0 -6 0,1 DC..11T3..
For size Insert key Insert screw Key (T-handle)
-11X H4B-T15P C04008-T15P DOUBLE-T
36
TURNING – STEADYLINE®, GL-HEADS, INT.
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
Please check availability in current price and stock-list
Spare Parts included in delivery
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDUCR/L-..X
GL..-SDUCR/L-..X
93°
Right-hand version shown
KAPR = 93°
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-SDUCR-22018-11X 32 18 21,9 40 0 -5 0,2 DC..11T3..
GL32-SDUCL-22018-11X 32 18 21,9 40 0 -5 0,2 DC..11T3..
GL40
11GL40-SDUCR-27017-11X 40 17 26,9 50 0 -5 0,2 DC..11T3..
GL40-SDUCL-27017-11X 40 17 26,9 50 0 -5 0,2 DC..11T3..
GL50
11GL50-SDUCR-32017-11X 50 17 32,0 63 0 -5 0,3 DC..11T3..
GL50-SDUCL-32017-11X 50 17 32,0 63 0 -5 0,3 DC..11T3..
For size Insert key Insert screw Key (T-handle)
..-11 H4B-T15P C04008-T15P DOUBLE-T
37
TURNING – STEADYLINE®, GL-HEADS, INT.
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDXCR/L
GL..-SDXCR/L
62,5 °
62,5
Right-hand version shown
KAPR = 62,5°
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
11GL25-SDXCR-17018-11 25 18 17 32 0 -6 0,1 DC..11T3..
GL25-SDXCL-17018-11 25 18 17 32 0 -6 0,1 DC..11T3..
For size Insert key Insert screw Key (T-handle)
-11 H4B-T15P C04008-T15P DOUBLE-T
38
• For inserts programme, see page(s) 424-427, 473, 500
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDXCR/L
GL..-SDXCR/L
62,5 °
Right-hand version shown
KAPR = 62,5°
Toolholders for inserts DCGT, DCGW, DCMT, DCMW and DCMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-SDXCR-22025-11 32 25 21,9 40 0 -5 0,2 DC..11T3..
GL32-SDXCL-22025-11 32 25 21,9 40 0 -5 0,2 DC..11T3..
GL40
11GL40-SDXCR-27025-11 40 25 26,9 50 0 -5 0,2 DC..11T3..
GL40-SDXCL-27025-11 40 25 26,9 50 0 -5 0,2 DC..11T3..
GL50
11GL50-SDXCR-32025-11 50 25 31,9 63 0 -5 0,3 DC..11T3..
GL50-SDXCL-32025-11 50 25 31,9 63 0 -5 0,3 DC..11T3..
For size Insert key Insert screw Key (T-handle)
..-11 H4B-T15P C04008-T15P DOUBLE-T
62,5
39
• For inserts programme, see page(s) 427-433, 474-476
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-DDUNR/L
GL..-DDUNR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts DNGG, DNGM, DNMA, DNMG, DNMM, DNMU and DNMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in deliveryAccessories to be ordered separately
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-DDUNR-22032-11 32 32 22,0 40 -6 -10 0,2 DN..1104..
GL32-DDUNL-22032-11 32 32 22,0 40 -6 -10 0,2 DN..1104..
GL40
11GL40-DDUNR-27032-11 40 32 27,0 50 -5 -10 0,2 DN..1104..
GL40-DDUNL-27032-11 40 32 27,0 50 -5 -10 0,2 DN..1104..
GL32
15GL32-DDUNR-22032-15 32 32 21,9 40 -6 -14 0,2 DN..1506..
GL32-DDUNL-22032-15 32 32 21,9 40 -6 -14 0,2 DN..1506..
GL40
15GL40-DDUNR-27032-15 40 32 27,0 50 -6 -12 0,2 DN..1506..
GL40-DDUNL-27032-15 40 32 27,0 50 -6 -12 0,2 DN..1506..
GL50
15GL50-DDUNR-32032-15 50 32 27,0 63 -6 -12 0,3 DN..1506..
GL50-DDUNL-32032-15 50 32 27,0 63 -6 -12 0,3 DN..1506..
For size Clamp pin Clamp screw Floating wedge clamp Insert shim Key (T-handle) Shim/clamp key Shim screw Spring
..-11 FP1508 L84017-T09P CD09-S DDN110310 DOUBLE-T H4B-T09P C03007-T09P S5608
GL32-..-15 FP2012 L85021-T15P CD12-S DDN150416 DOUBLE-T H4B-T15P C04008-T15P S6912
GL40/50-..-15 FP2012 L85021-T15P CD12-S DDN150416 DOUBLE-T H4B-T15P C04008-T15P S6912
Clamp kit
CD09-S09
CD12-S12
CD12-S12
40
• For inserts programme, see page(s) 432-433, 476
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDXNR/L
GL..-SDXNR/L
62,5 °
62,5
Right-hand version shown
KAPR = 62,5°
Toolholders for inserts DNMA, DNMU and DNMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-SDXNR-22025-11 32 25 21,9 40 0 -10 0,2 DN..1104..
GL32-SDXNL-22025-11 32 25 21,9 40 0 -10 0,2 DN..1104..
For size Insert key Insert screw Key (T-handle)
..-11 H4B-T09P C03511-T09P DOUBLE-T
41
Toolholders for inserts DNMA, DNMU and DNMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list
Spare Parts included in delivery
• For inserts programme, see page(s) 432-433, 476
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDUNR/L
GL..-SDUNR/L
93 °
Right-hand version shown
KAPR = 93°
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
11GL25-SDUNR-17020-11 25 20 17 32 -5 -13 0,1 DN..1104..
GL25-SDUNL-17020-11 25 20 17 – -5 -13 0,1 DN..1104..
For size Insert key Insert screw Key (T-handle)
-11 H4B-T09P C03511-T09P DOUBLE-T
42
• For inserts programme, see page(s) 432-433, 476
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SDUNR/L-..X
GL..-SDUNR/L-..X
93 °
Right-hand version shown
KAPR = 93°
Toolholders for inserts DNMU and DNMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list
Spare Parts included in delivery
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-SDUNR-22018-11X 32 18 21,9 40 -6 -10 0,2 DN..1104..
GL32-SDUNL-22018-11X 32 18 21,9 40 -6 -10 0,2 DN..1104..
For size Insert key Insert screw Key (T-handle)
..-11 H4B-T09P C03511-T09P DOUBLE-T
43
• For inserts programme, see page(s) 477-478, 501, 504
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-CRSNR/L
GL..-CRSNR/L
Right-hand version shown
Toolholders for PCBN inserts RNGN-LF, RNGN and RNMN
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in deliveryAccessories to be ordered separately
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
09GL32-CRSNR-22032-09 32 32 22,0 40 -6 -12 0,2 RN.N0903..
GL32-CRSNL-22032-09 32 32 22,0 40 -6 -12 0,2 RN.N0903..
For size Cantilever clamp Clamp key Insert shim Pressure plate Shim screw
..-09 CC17P-09 4SMS795 117.10-620 P1311-09 174.10-652-T07P
Shim key
T07P-2
44
Toolholders for inserts TCGT, TCGW, TCMT and TCMW
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list
Spare Parts included in delivery
• For inserts programme, see page(s) 449, 451, 486, 501
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-STFCR/L
GL..-STFCR/L
90 °
Right-hand version shown
KAPR = 90°
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
11GL25-STFCR-17020-11 25 20 17,0 32 0 -3 0,1 TC..1102..
GL25-STFCL-17020-11 25 20 17,0 32 0 -3 0,1 TC..1102..
For size Insert key Insert screw Key (T-handle)
-11 H4B-T07P C02506-T07P DOUBLE-T
45
• For inserts programme, see page(s) 449-452, 501
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-STFCR/L
GL..-STFCR/L
90 °
Right-hand version shown
KAPR = 90°
Toolholders for inserts TCGT, TCGX, TCMT, TCMW and TCMX
TURNING – STEADYLINE®, GL-HEADS, INT.
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in deliveryAccessories to be ordered separately
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
16GL32-STFCR-22032-16 32 32 22,0 40 0 -10 0,2 TC..16T3..
GL32-STFCL-22032-16 32 32 22,0 40 0 -10 0,2 TC..16T3..
GL40
16GL40-STFCR-27032-16 40 32 27,0 50 0 -8 0,2 TC..16T3..
GL40-STFCL-27032-16 40 32 27,0 50 0 -8 0,2 TC..16T3..
GL50
16GL50-STFCR-32032-16 50 32 32,0 63 0 -8 0,3 TC..16T3..
GL50-STFCL-32032-16 50 32 32,0 63 0 -8 0,3 TC..16T3..
For size Insert key Insert screw Insert shim Key (T-handle) Shim screw
..-16 H4B-T15P C03509-T15P STN160312 DOUBLE-T CA3510
Shim key
9/64SMS875
46
• For inserts programme, see page(s) 488-492
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-CTUNR/L
GL..-CTUNR/L
93 °
Right-hand version shown
KAPR = 93°
Toolholders for PCBN inserts TNGN-LF, TNGN, TNGX, TNMN and TNMX
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT.
Accessories to be ordered separately
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
11GL32-CTUNR-22032-11 32 32 22,0 40 -6 -10 0,2 TN..1103..
GL32-CTUNL-22032-11 32 32 22,0 40 -6 -10 0,2 TN..1103..
For size Cantilever clamp Clamp key Insert shim Pressure plate Shim screw
..-11 CC17P-06 4SMS795 CTN110308 P1311-06 CS2507-T07P
Shim key
T07P-2
47
Toolholders for inserts VBGT and VBMT
Please check availability in current price and stock-list
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT.
• For inserts programme, see page(s) 459-460
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SVUBR/L
GL..-SVUBR/L
93 °
Right-hand version shown
KAPR = 93°
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL25
11GL25-SVUBR-17020-11 25 20 17,0 32 0 -4 0,1 VB..1102..
GL25-SVUBL-17020-11 25 20 17,0 32 0 -4 0,1 VB..1102..
For size Insert key Insert screw Key (T-handle)
-11 H4B-T07P C02506-T07P DOUBLE-T
48
GL..-SVUBR/L
93 °
• For inserts programme, see page(s) 459-460, 493, 502
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310Right-hand version shown
KAPR = 93°
Toolholders for inserts VBGT, VBGW, VBMT and VBMW
Please check availability in current price and stock-list
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT.
GL..-SVUBR/L
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
16GL32-SVUBR-22032-16 32 32 22,0 40 0 -3 0,2 VBMT1604..
GL32-SVUBL-22032-16 32 32 22,0 40 0 -3 0,2 VBMT1604..
GL40
16GL40-SVUBR-27032-16 32 32 26,9 40 0 -3 0,2 VBMT1604..
GL40-SVUBL-27032-16 32 32 26,9 40 0 -3 0,2 VBMT1604..
GL50
16GL50-SVUBR-32032-16 50 32 31,9 63 0 -3 0,3 VBMT1604..
GL50-SVUBL-32032-16 50 32 31,9 63 0 -3 0,3 VBMT1604..
For size Insert key Insert screw Insert shim Key (T-handle) Shim screw
..-16 H4B-T15P C03510-T15P 171.19-620 DOUBLE-T CA3507
49
Toolholders for inserts VNMU
Please check availability in current price and stock-list
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT.
• For inserts programme, see page(s) 464
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310
GL..-SVUNR/L
93 °
Right-hand version shown
KAPR = 93°
GL..-SVUNR/L
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
13GL32-SVUNR-22032-13 32 32 21,9 40 -5 -12 0,2 VN..1304..
GL32-SVUNL-22032-13 32 32 21,9 40 -5 -12 0,2 VN..1304..
For size Insert key Insert screw Insert shim Key (T-handle) Shim screw
..-13 H4B-T09P C03511-T09P PVN130308 DOUBLE-T CA3507
..-13 H4B-T15P C03512-T15P PVN130308 DOUBLE-T CA3507
50
• For inserts programme, see page(s) 465-469, 496-497
• GAMO° = Rake angle, LAMS° = Inclination angle
• For holder code key, see page(s) 12-13
• For damping holders programme, see page(s) 303-310Right-hand version shown
KAPR = 95°
Toolholders for inserts WNGA, WNGG, WNMA, WNMG and WNMM
Please check availability in current price and stock-list * To be ordered separately
Spare Parts included in delivery
TURNING – STEADYLINE®, GL-HEADS, INT.
GL..-DWLNR/L
GL..-DWLNR/L
95 °
Size Designation
Dimensions in mm
GAMO° LAMS°DCSFMS LF WF DCINN
GL32
06GL32-DWLNR-22032-06 32 32 22,0 40 -5 -12 0,2 WN..0604..
GL32-DWLNL-22032-06 32 32 22,0 40 -5 -12 0,2 WN..0604..
08GL32-DWLNR-22035-08 32 35 22,0 40 -5 -14 0,2 WN..0804..
GL32-DWLNL-22035-08 32 35 22,0 40 -5 -14 0,2 WN..0804..
GL40
06GL40-DWLNR-27032-06 40 32 27,0 50 -5 -12 0,2 WN..0604..
GL40-DWLNL-27032-06 40 32 27,0 50 -5 -12 0,2 WN..0604..
08GL40-DWLNR-27037-08 40 37 27,0 50 -5 -12 0,2 WN..0804..
GL40-DWLNL-27037-08 40 37 27,0 50 -5 -12 0,2 WN..0804..
GL50
06GL50-DWLNR-32032-06 50 32 32,0 63 -5 -12 0,3 WN..0604..
GL50-DWLNL-32032-06 50 32 32,0 63 -5 -12 0,3 WN..0604..
08GL50-DWLNR-32038-08 50 38 32,0 63 -5 -12 0,3 WN..0804..
GL50-DWLNL-32038-08 50 38 32,0 63 -5 -12 0,3 WN..0804..
For size Clamp pin Clamp screw Floating wedge clamp Insert shim Key (T-handle) Shim/clamp key Shim screw Spring
..-06 FP1508 L84017-T09P CD09-S DWN060310 DOUBLE-T H4B-T09P C03007-T09P S5608
..-08 FP2012 L85021-T15P CD12-S DWN080416 DOUBLE-T H4B-T15P C04008-T15P S6912
Clamp kit
CD09-S09
CD12-S12
51
52
Toolholders for S-inserts Snap-Tap®
Please check availability in current price and stock-list
• For inserts programme, see page(s) 88, 90, 93-94, 97-100,
102-103, 105-107, 109, 111, 113, 117 Right-hand version shown
Accessories to be ordered separately
Spare Parts included in delivery
THREAD TURNING – STEADYLINE®, GL-HEADS, JETSTREAM TOOLING®
For
holder
Insert lever Insert shim (S) Key (T-handle) Lever screw Locking key Shim pin
..16.. PP3712 GXA16-1 DOUBLE-T LS0612-T15P H4B-T15P AC4625
For
holder
Insert shim (M)
..16.. MXA16-1
Insert shim (S)
GXA16-0 GXA16-2 GXA16-3 GXA16-4 GXA16-98 GXA16-99
Application
Designation
Dimensions in mm
CP*DCSFMS LF WF DCINN
GL32-PNR-20032-16AHDJET 32,0 32,0 19,8 40,0 200,0 0,2 16
GL32-PNL-20032-16AHDJET 32,0 32,0 19,8 40,0 200,0 0,2 16
GL40-PNR-24032-16AHDJET 40,0 32,0 23,8 50,0 200,0 0,4 16
GL40-PNL-24032-16AHDJET 40,0 32,0 23,8 50,0 200,0 0,3 16
GL50-PNR-29032-16AHDJET 50,0 32,0 28,8 60,0 200,0 0,5 16
GL50-PNL-29032-16AHDJET 50,0 32,0 28,8 60,0 200,0 0,5 16
* Max coolant pressure (bar)
53
THREAD TURNING – STEADYLINE®, GL-HEADS, JETSTREAM TOOLING®
Accessories to be ordered separately
Toolholders for S-inserts Snap-Tap®
• For inserts programme, see page(s) 88, 90, 93-94, 97-98, 102,
105, 107, 109, 111, 113-114, 116-119
Please check availability in current price and stock-list
Spare Parts included in delivery
For
holder
Insert lever Insert shim (S) Key (T-handle) Lever screw Locking key Shim pin
..22A.. PP4816 NXA22-1 DOUBLE-T LS0815-T25P H6B-T25P AC5035
..27A.. PP6019 VXA27-1 DOUBLE-T LS0820-T25P H6B-T25P AC6050
For
holder
Insert shim (M)
..22A.. MXA22-1
..27A.. MXA27-1
Insert shim (S)
NXA22-0 NXA22-0.5 NXA22-1 NXA22-1.5 NXA22-2 NXA22-3 NXA22-4 NXA22-97.5 NXA22-98 NXA22-98.5 NXA22-99 NXA22-99.5
VXA27-0 VXA27-0.5 VXA27-1 VXA27-1.5 VXA27-2 VXA27-3 VXA27-4 – VXA27-98 VXA27-98.5 VXA27-99 VXA27-99.5
Application
Designation
Dimensions in mm
CP*DCSFMS LF WF DCINN
GL32-PNR-22032-22AHDJET 32,0 32,0 21,3 40,0 200,0 0,2 22
GL32-PNL-22032-22AHDJET 32,0 32,0 21,3 40,0 200,0 0,1 22
GL40-PNR-26032-22AHDJET 40,0 32,0 25,3 50,0 200,0 0,3 22
GL40-PNL-26032-22AHDJET 40,0 32,0 25,3 50,0 200,0 0,3 22
GL50-PNR-31032-22AHDJET 50,0 32,0 30,3 60,0 200,0 0,4 22
GL50-PNL-31032-22AHDJET 50,0 32,0 30,3 60,0 200,0 0,5 22
GL40-PNR-27037-27AHDJET 40,0 37,0 26,8 50,0 200,0 0,3 27
GL50-PNR-32037-27AHDJET 50,0 37,0 31,8 60,0 200,0 0,3 27
Right-hand version shown
* Max coolant pressure (bar)
54
Accessories to be ordered separately
THREAD TURNING – STEADYLINE®, GL-HEADS
Toolholders with GL connection for S-inserts
• For inserts programme, see page(s) 88, 90, 93-94, 97-100,
102-103, 105-107, 111, 113, 117
GL..-CNR/L
Snap-Tap®
Please check availability in current price and stock-list
Spare Parts included in delivery
Right-hand version shown
For
holder
Shim key
..-16 H4B-T09P
Insert shim (M) Insert shim (S)
MX16-1 GX16-0 GX16-2 GX16-3 GX16-4 GX16-98 GX16-99
Application
Designation
Dimensions in mm
DCSFMS LF WF DCINN
GL32-CNR-20032-16AHD 32,0 32 19,8 40 0,2 16..
GL32-CNL-20032-16AHD 32,0 32 19,8 40 0,2 16..
GL40-CNR-24032-16AHD 40,0 32 24,0 50 0,3 16..
GL40-CNL-24032-16AHD 40,0 32 24,0 50 0,3 16..
GL50-CNR-29032-16AHD 50,0 32 29,0 63 0,4 16..
GL50-CNL-29032-16AHD 50,0 32 29,0 63 0,4 16..
For
holder
Cantilever clamp Clamp key Clamp screw Insert shim (S) Key (T-handle) Shim screw Spring
..-16 CHD16 H4B-T15P L85020-T15P GX16-1 DOUBLE-T CS3507-T09P S6912
GL..-CNR/L
THREAD TURNING – STEADYLINE®, GL-HEADS
Toolholders with GL connection for S-inserts Snap-Tap®
• For inserts programme, see page(s) 87, 89, 91-92, 95-96,
101, 104, 107-108, 110, 112, 114-115, 117-119
Please check availability in current price and stock-list
Accessories to be ordered separately
Spare Parts included in delivery
Right-hand version shown
55
Application
Designation
Dimensions in mm
DCSFMS LF WF DCINN
GL32-CNR-22032-22AHD 32,0 32 21,3 38 0,2 22..
GL32-CNL-22032-22AHD 32,0 32 21,3 38 0,2 22..
GL40-CNR-26032-22AHD 40,0 32 26,0 50 0,3 22..
GL40-CNL-26032-22AHD 40,0 32 26,0 50 0,3 22..
GL50-CNR-31032-22AHD 50,0 32 31,0 63 0,4 22..
GL50-CNL-31032-22AHD 50,0 32 31,0 63 0,4 22..
GL40-CNR-27037-27AHD 40,0 37 27,0 50 0,3 27..
GL50-CNR-32037-27AHD 50,0 37 32,0 63 0,4 27..
For
holder
Shim key
..-22 H4B-T15P
..-27 H4B-T15P
Insert
shim (M)Insert shim (S)
MX22-1 NX22-0 NX22-0.5 NX22-1.5 NX22-2 NX22-3 NX22-4 NX22-97.5 NX22-98 NX22-98.5 NX22-99 NX22-99.5MX27-1 VX27-0 VX27-0.5 VX27-1.5 VX27-2 VX27-3 VX27-4 – VX27-98 VX27-98.5 VX27-99 VX27-99.5
For
holder
Cantilever clamp Clamp key Clamp screw Insert shim (S) Key (T-handle) Shim screw Spring
..-22 CSP22HD-T15P H6B-T20P – NX22-1 DOUBLE-T CS4009-T15P –
..-27 CHD27 H6B-T20P L86025-T20P VX27-1 DOUBLE-T C05012-T15P S7616
Right-hand version shown
56
THREAD TURNING – STEADYLINE®, GL-HEADS, INTERNAL
Toolholders for chasers, internal Snap-Tap®
Application
Designation
Dimensions in mm
DCSFMS LF WF
GL50-CNR-32035-9-I 50,0 35,0 32,0 0,4 12.700
GL50-CNR-32038-1-X 50,0 38,0 32,0 0,4 15.875
GL50-CNR-32044-5-X 50,0 44,0 32,0 0,5 25.000
GL50-CNL-32035-9-I 50,0 35,0 32,0 0,5 12.700
GL50-CNL-32038-1-X 50,0 38,0 32,0 0,5 15.875
GL50-CNL-32044-5-X 50,0 44,0 32,0 0,5 25.000
For
holder
Clamp kit side Clamp kit top Key, side clamp Key, top clamp
...9-1 W200613-T20P W200613-T20P T20P-7 T20P-7
...1-X, ...5-X W200613-T20P W240618-T25P T20P-7 T25P-7
Please check availability in current price and stock-list
Spare Parts included in delivery
For inserts programme, see Threading Catalog page 116
Right-hand version shown
57
MDT – STEADYLINE®, GL-HEADS, JETSTREAM TOOLING®
* DCINN – minimum bore diameter, see page(s) 545 *** Max coolant pressure (bar) using hose connection
• For inserts programme, see page(s) 651-664, 666-667
• For damping holders programme, see page(s) 303-310
GL.-CGJR/L-..JET
GL.-CGJR/L-..JET
Toolholders for inserts LCGF, LCGN, LCMF and LCMR
Please check availability in current price and stock-list
Spare Parts included in delivery
Right-hand version shown
Size Designation
Dimensions in mm
CP
***
DCSFMS LF WF LH CDX DCINN*
GL32
2GL32-CGJR-25032-1902JET 32 32 25,0 23,0 7,0 43 200 0,2 LC..1902..
GL32-CGJL-25032-1902JET 32 32 25,0 23,0 7,0 43 200 0,2 LC..1902..
GL40
2GL40-CGJR-29032-1902JET 40 32 29,0 22,0 7,0 51 200 0,2 LC..1902..
GL40-CGJL-29032-1902JET 40 32 29,0 22,0 7,0 51 200 0,2 LC..1902..
GL50
2GL50-CGJR-34032-1902JET 50 32 34,0 21,5 7,0 61 200 0,3 LC..1902..
GL50-CGJL-34032-1902JET 50 32 34,0 21,5 7,0 61 200 0,3 LC..1902..
For size Clamp key Clamp screw Key (T-handle) Screw
1902 H4B-T15P L85011-T15P DOUBLE-T P6SS3X5
MDT – STEADYLINE®, GL-HEADS, JETSTREAM TOOLING®
* DCINN – minimum bore diameter, see page(s) 545 *** Max coolant pressure (bar) using hose connection
58
• For inserts programme, see page(s) 651-664, 666-667
• For damping holders programme, see page(s) 303-310
GL.-CGIR/L-..JET
GL.-CGIR/L-..JET
Toolholders for inserts LCGF, LCGN, LCMF and LCMR
Please check availability in current price and stock-list
Spare Parts included in delivery
Right-hand version shown
Size Designation
Dimensions in mm
CP
***
DCSFMS LF WF LH CDX DCINN*
GL32
3GL32-CGIR-26032-1603JET 32 32 26,5 23,0 9,0 44 200 0,2 LC..1603..
GL32-CGIL-26032-1603JET 32 32 26,5 23,0 9,0 44 200 0,2 LC..1603..
GL40
3GL40-CGIR-30032-1603JET 40 32 30,5 22,5 9,0 52 200 0,2 LC..1603..
GL40-CGIL-30032-1603JET 40 32 30,5 22,5 9,0 52 200 0,2 LC..1603..
GL50
3GL50-CGIR-35032-1603JET 50 32 35,5 21,5 9,0 62 200 0,3 LC..1603..
GL50-CGIL-35032-1603JET 50 32 35,5 21,5 9,0 62 200 0,3 LC..1603..
For size Clamp key Clamp screw Key (T-handle)
1603 H4B-T15P L85011-T15P DOUBLE-T
• For inserts programme, see page(s) 651-664, 666-667
• For damping holders programme, see page(s) 303-310
GL.-CGHR/L-..JET
GL.-CGHR/L-..JET
Toolholders for inserts LCGF, LCGN, LCMF and LCMR
MDT – STEADYLINE®, GL-HEADS, JETSTREAM TOOLING®
* DCINN – minimum bore diameter, see page(s) 545 *** Max coolant pressure (bar) using hose connection
Please check availability in current price and stock-list
Spare Parts included in delivery
59
Right-hand version shown
Size Designation
Dimensions in mm
CP
***
DCSFMS LF WF LH CDX DCINN*
GL32
4GL32-CGHR-27032-1604JET 32 32 27,5 23,0 10,0 45 200 0,2 LC..1604..
GL32-CGHL-27032-1604JET 32 32 27,5 23,0 10,0 45 200 0,2 LC..1604..
GL40
4GL40-CGHR-31032-1604JET 40 32 31,5 22,5 10,0 53 200 0,2 LC..1604..
GL40-CGHL-31032-1604JET 40 32 31,5 22,5 10,0 53 200 0,2 LC..1604..
GL50
4GL50-CGHR-36032-1604JET 50 32 36,5 21,5 10,0 63 200 0,3 LC..1604..
GL50-CGHL-36032-1604JET 50 32 36,5 21,5 10,0 63 200 0,3 LC..1604..
For size Clamp key Clamp screw Key (T-handle)
1604 H4B-T15P L85011-T15P DOUBLE-T
60
61
Steadyline® bars with Seco-Capto™ and HSK-T/A machine side connection are equally suitable for static turning operations and for rotating boring operations.
By incorporating the advanced damping capabilities of Steadyline®, these boring solutions eliminate vibration, achieve higher productivity, boost surface quality and enable depths of up to 10xD.
Steadyline® bars with Seco-Capto™ machine side connection can be mounted on steep angle spindles (DIN, BT, CAT) using the shortest Seco-Capto™ adapters to maintain the efficiency of the Steadyline® damper.
• Diameter range Ø34mm to 115mm (1.34“ to 4.57“)• Available with GL32, GL40, GL50, BA60 and BA80 machine side connections• Suitable for boring applications up to 8xD
BORING HEADS
FINE BORING HEAD - EPB® 620
EXPANDING THE BENEFITS OF VIBRATION DAMPING FOR HIGHER DEPTHS
ROUGH BORING HEAD - EPB® 610
61
62
EPB® 610 ROUGH BORING HEADSFeaturing a compact design, EPB® 610 boring heads provide the best possible damping performance when used with Steadyline® turning and boring bars. The advanced capabilities of Steadyline® allow bars of up to 10xD to achieve the same results as shorter, non-damped assemblies.
The insert holders achieve a 90° lead angle for rhombic inserts, 0° rake angle and 0° inclination angle. A push-pull setting mechanism makes it fast and easy to set the diameter using a presetter.
The rough boring head assembly combines a body (head) with two insert holders to optimise geometrical hole precision starting from cast, flame cut or drilled holes. The symmetrical design ensures the best possible balance.
OPTIMISED PERFORMANCE• High rigidity through a tight fit between the holders and body and large clamping screws• Depth of cut of up to half the insert width maximises insert efficiency and metal removal rates• Staggered boring using an included shim to offset one holder can increase or split the radial depth of cut• Through-coolant delivery to increase insert life, performance and chip flow
ROUGH BORING HEADS
EXCELLENT PERFORMANCE FOR DIAMETERS 36 MM - 115 MM (1.42“ TO 4.57“)
Machine side
GL size
Workpiece side
Capacity DCN-DCX ∅ mm Designation
Dimensions in mm Max.
RPM**OAL LF1 LF2 BD
GL32 36,0-46,0 GL32-0610-20 27,6 21,1 32,0 32,0 7500 0,10
GL40 45,0-56,0 GL40-0610-30 31,6 22,1 35,0 40,0 5700 0,20
GL50 55,0-69,0 GL50-0610-40 33,7 22,2 36,0 50,0 4500 0,30
Machine side
BA size
Workpiece side
Capacity DCN-DCX ∅ mm Designation
Dimensions in mm Max.
RPM**OAL LF1 LF2 BD
BA060 66,0-88,0 BA060-RB610-50 38,5 22,5 39,8 60,0 4000 0,60
BA080 86,0-116,0 BA080-RB610-60 44,5 22,5 39,8 80,0 3000 0,60
• Designed for GL32, GL40 and GL50 Steadyline® turning
and boring bars
• Symmetrical and staggered boring modes are possible
• Individual insert holder adjusting driving mechanism
• Internal coolant supply towards cutting edge
• Designed for BA60 and BA80 Steadyline® turning and
boring bars
• Symmetrical and staggered boring modes are possible
• Individual insert holder adjusting driving mechanism
• Internal coolant supply towards cutting edge
SECO EPB® 610 GL – Rough boring heads, compact
SECO EPB® 610 BA – Rough boring heads
GL
BA
1. Assembly screw and clamp key
2. & 4. Insert key for diameter setting
and insert screw clamping
1. Assembly screw and clamp key
2. & 4. Insert key for diameter setting
and insert screw clamping
63
ROUGH BORING HEADS, EPB® 610
*Without insert holder ** Additional information about max RPM, see Instruction pages.
For head Assembly screw Clamp key Insert key Shim, staggered boring
GL32-0610-20 950DC0412 03HL03 T07P-3 AU6102003
GL40-0610-30 950DC0616 03HL05 T15P-3 AU6103003
GL50-0610-40 950D0616 03HL05 T15P-3 AU6104003
BA060-RB610-50 950D0820 03HL06 T15P-3 AU6105003
BA080-RB610-60 950D0820 03HL06 T15P-3 AU6106003
Boring heads spare parts included in delivery
63
64
For insert size Insert screw Setting screw
A61020CC0690 C02504-T07P 19A61020
A61030CC0990 C04008-T15P 19A61030
A61040CC0990 C04008-T15P 19A61040
A61050CC1290 C05012-T15P 19A61050
A61060CC1290 C05012-T15P 19A61060
Please check availability in current price and stock-list
Insert holders spare parts included in delivery
For boring head
Capacity DC
∅ mm Designation KRINS°
Dimensions in mm Suitable insert
sizeOAL LF B
EPB® 61020 36,0-46,0 A61020CC0690 90,0 17,6 10,9 26,0 CC...0602... 0,1
EPB® 61030 39,0-56,0 A61030CC0990 90,0 21,6 12,9 33,0 CC...09T3... 0,1
EPB® 61040 50,0-69,0 A61040CC0990 90,0 22,5 13,8 43,8 CC...09T3... 0,1
EPB® 61050 64,0-86,0 A61050CC1290 90,0 27,5 17,3 57,4 CC...1204... 0,2
EPB® 61060 85,0-115,0 A61060CC1290 90,0 30,5 18,8 75,0 CC...1204... 0,3
ROUGH BORING HEADS, EPB® 610
• Suitable for boring heads SECO EPB® 610 with Graflex®,
GL or BA connection
Insert holders, for rough boring heads SECO EPB® 610
2. Setting screw
4. Insert screw
SECO EPB® 620 FINE BORING HEADSThe Seco EPB® 620 fine boring head assembly features a body (head) and radially fitted insert holder that incorporates a common front end design to ac-commodate the existing range of insert holders. Micrometric adjustment allows for maximum precision while a wide range of fine boring, chamfering and back boring holders can be used with the heads to ensure flexibility.
Seco EPB® 620 heads include a clamping screw for the insert holder, key for the insert holder clamping screw, diameter setting, barrel locking screw and operating instructions.
Seco EPB® 620 insert holders include the insert screw and key for the insert screw clamping. Additionally, chamfering insert holders also include a specific insert holder clamp screw, which is used instead of the standard clamp screw.
PREDICTABLE AND REPEATABLE PRECISION- Angular orientation of the cutting edge according to DIN 6987/ISO 7388 for SA and ISO 12164 for HSK- Heads with insert holders pre-balanced on median diameter setting- Insert holder setting mechanism features micrometric adjusting screw (1 increment = 0,01 mm on diameter) and a vernier scale (resolution of 2,5 μm on diameter)- Through-coolant delivery to increase insert life, performance and chip flow
FINE BORING
SUPERB FINISHING PERFORMANCE FOR DIAMETERS 34 MM TO 115 MM (1.34“ TO 4.53“)
65
Machine side
BA size
Workpiece side
Capacity DCN-DCX ∅ mm Designation
Dimensions in mm Max.
RPM**OAL BD LF1 LF2
BA060 65,0-87,0 BA060-FB620-50 55,7 29,7 42,2 60,0 4000 0,60
BA080 85,0-115,0 BA080-FB620-60 58,2 26,7 45,2 80,0 3000 0,60
• Designed for BA60 and BA80 Steadyline® turning and boring bars
• Internal coolant supply towards cutting edge
• With micrometric adjusting (increment 0,01 mm and vernier
2,5 μm, on the diameter)
EPB 620 BA – Fine boring heads, with BA connection BA
1. Assembly screw and clamp key
2. & 4. Insert key for diameter setting
and insert screw clamping
66
Machine side
GL size
Workpiece side
Capacity DCN-DCX ∅ mm Designation
Dimensions in mm Max.
RPM**OAL BD LF1 LF2
GL32 34,0-46,0 GL32-0620-20 35,2 32,0 23,8 32,1 7000 0,13
GL40 42,0-56,0 GL40-0620-30 40,7 40,0 24,8 35,1 5600 0,22
GL50 52,0-69,0 GL50-0620-40 43,7 50,0 25,8 36,1 4800 0,32
FINE BORING HEADS, EPB® 620
*Without insert holder ** Additional information about max RPM, see Instruction pages.
• Designed for GL32, GL40 and GL50 Steadyline® turning and boring bars
• Internal coolant supply towards cutting edge
• With micrometric adjusting (increment 0,01 mm and vernier
2,5 µm, on the diameter)
SECO EPB® 620 GL – Fine boring heads, compact, with GL connection GL
1. Assembly screw
2. Micromedic adjusting screw
3. Locking screw
For head Assembly screw Clamp key Locking screw
GL32-0620-20 19TB0305 H2.0-2D 950L0406
GL40-0620-30 19TB04075 03M03C 950L0608
GL50-0620-50 19TB04075 03M03C 950L0608
BA060-FB620-50 19TB04075 03M03C 950L0608
BA080-FB620-60 950D0514 H05-4 950L0608
Boring heads spare parts included in delivery
• Suitable for radial boring heads SECO EPB® 620
Insert holders, for fine boring heads EPB® 620
67
FINE BORING HEADS, EPB® 620
Please check availability in current price and stock-list
Insert holders spare parts included in delivery
Insert holders
type For boring head
Insert
holder
size
Capacity DCN-DCX
∅ mm Designation
Dimensions
in mmSuitable insert
size Des
ign
WF LF
90° for CC
insertsEPB® 62020 20 30,0-46,0 A72520 5,0 8,3 CC...0602... B 0,02
EPB® 62030 30 39,0-56,0 A72530 8,0 10,3 CC...0602... B 0,02
EPB® 62040 40 50,0-69,0 A72540 9,5 10,3 CC...0602... B 0,02
EPB® 62050 50 64,0-86,0 A72550 12,5 10,3 CC...0602... B 0,02
EPB® 62060 60 85,0-115,0 A7256A 18,5 14,5 CC...09T3... B 0,0590° for TC
insertsEPB® 62030 30 39,0-56,0 A72430 7,9 10,3 TC...1102... C 0,01
EPB® 62040 40 50,0-69,0 A72440 9,4 10,3 TC...1102... C 0,02
EPB® 62050 50 64,0-86,0 A72450 12,4 10,3 TC...1102... C 0,0295° for CC
insertsEPB® 62020 20 30,0-46,0 A72620 5,0 8,3 CC...0602... D 0,01
EPB® 62030 30 39,0-56,0 A72630 8,0 10,3 CC...0602... D 0,01
EPB® 62040 40 50,0-69,0 A72640 9,5 10,3 CC...0602... D 0,02
EPB® 62050 50 64,0-86,0 A72650 12,5 10,3 CC...0602... D 0,02
For insert size Insert key Insert screw
CC...0602... T07P-3 C02504-T07P
CC...09T3... T15P-3 C04008-T15P
TC...1102... T07P-3 C02504-T07P
WB...0301... T06P-2 C02035-T06P
B C D
68
With configuration for Combimaster™ and shell-mill holders, Steadyline® covers a broad range of milling applications from ø20 mm to over ø160 mm. Introduced in 2009, the shell-mill holders are already providing highly efficient performance in thousands of applications worldwide. All Steadyline® products maximise rigidity through a conical-reinforced cylindrical shape that achieves high static and dynamic stability in heavy machining applications. Additionally, the holders feature a chrome-coated surface that increases resistance to wear and corrosion.
MILLING
FLEXIBLE SYSTEM: COMBIMASTER™A versatile option with high levels of interchangeability, the Combimaster™ system features replaceable head milling cutters for all kinds of applications (e.g. square shoulder milling, end milling, copy milling, face milling, plunge milling, disc milling, etc.) and many insert styles.• Connection size: M10 to M20• Different pitch versions• Rigid clamping
VERSATILE SOLUTIONS FOR ALL YOUR MILLING APPLICATIONS
WIDE MILLING RANGE OF SECO®
SHELL-MILL HOLDERS - TYPE 5555-5556Providing an ideal solution across a range of applications, shell-mill holders excel for slot milling, square shoulder milling, contouring, face milling, helical interpolation ramping and copy milling.• Arbor: ø16 mm to ø40 mm• Enhanced bearing surface • Coolant channels through pilot
69
CASE STUDIESMILLING
CASE 1: SHELL MILLCONVENTIONAL MILLING TOOL
CASE 2: COMBIMASTER™CONVENTIONAL MILLING TOOL
CASE 3: COMBIMASTER™CONVENTIONAL MILLING TOOL
CASE 1: SHELL MILLAV SYSTEM
CASE 2: COMBIMASTER™AV SYSTEM
CASE 3: COMBIMASTER™AV SYSTEM
Operation: Pocket milling
Cutter: R220.97-0050-V22.2A
Tooling: C6-391.5525-22210
Insert: VPGX220640ER-E10, H25
Material: AlZnMgCu1.5
Cutting vc fz
data Metric 1180m/min 0.25 mm/tooth
ap ae
Metric 3.5 mm 25 mm
Operation: Side milling
Cutter: R217.69-1020.RE-10-3A (ø20 mm)
Tooling: E9304582010185
Material: 1.1206 CK50
Cutting vc fz
data Metric 312m/min 0.3 mm/tooth
ap ae
Metric 0.9 mm 4.0 mm
Operation: Slotting
Cutter: R217.69-1020.RE-10-3A (ø20 mm)
Tooling: E9304582010185
Material: 1.1206 CK50
Cutting vc fz
data Metric 200 m/min 0.16 mm
ap ae
Metric 0.25 mm 20 mm
Operation: Pocket milling
Cutter: R220.97-0050-V22.2A
Tooling: C6-391.5555-22210
Insert: VPGX220640ER-E10, H25
Material: AlZnMgCu1.5
Cutting vc fz
data Metric 1270m/min 0.25 mm/tooth
ap ae
Metric 7.0 mm 25 mm
Results • Increased feed rate
• Doubled cutting depth
Operation: Side milling
Cutter: R217.69-1020.RE-10-3A (ø20 mm)
Tooling: E9304K82010185
Material: 1.1206 CK50
Cutting vc fz
data Metric 312 m/min 0.3 mm/tooth
ap ae
Metric 2.2 mm 4.0 mm
Results Increased cutting depth: ap x 2,3
Operation: Slotting
Cutter: R217.69-1020.RE-10-3A (ø20 mm)
Tooling: E9304K82010185
Material: 1.1206 CK50
Cutting vc fz
data Metric 200 mm/min 0.16 mm
ap ae
Metric 0.8 mm 20 mm
Results 3 times higher cutting depth
70
HSK-A TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders HSK-A/ ISO12164-1-HSK-A
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in mm
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
mm LF BD BD1 OAL LB LSC
HSK-A6316 E9304555516160 160,0 38,0 38,0 209,0 134,0 17,0 1 – 1 PB 2,40
22 E9304555522210 210,0 48,0 48,0 261,0 184,0 19,0 1 – 1 PB 3,54
22 E9304555622260 260,0 48,0 63,3 311,0 234,0 19,0 2 1,9 1 PB 5,38
27 E9304555527260 260,0 60,0 60,0 313,0 234,0 21,0 1 – 1 PB 6,56
HSK-A10022 E9306555522210 210,0 48,0 48,0 279,0 181,0 19,0 1 – 1 PB 4,80
22 E9306555622260 260,0 48,0 65,0 329,0 231,0 19,0 2 1,9 1 PB 6,78
27 E9306555527260 260,0 60,0 60,0 331,0 231,0 21,0 1 – 1 PB 7,92
32 E9306555532330 330,0 78,0 78,0 404,0 301,0 24,0 1 – 1 PB 14,42
Please check availability in current price and stock-list
For HSK sealing plugs, coolant tubes and tube spanners, see Machining Navigator Tooling Catalogue.
*These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders.
For DMM Bolt, through coolant Spanner
16 5801608L 5811608
22 5802210L 5812210
27 5802712L 5812712
32 5803216L 5813216
Accessories to be ordered separatelyFor DMM Bolt* Screw Tenon
16 5801608 951D0312 16C2080810A
22 5802210 951D0416 16C2101111
27 5802712 951D0516 16C2121214A
32 5803216 951D0516 16C2141421A
Spare Parts included in delivery
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
71
HSK-A TO COMBIMASTER™
SECO EPB® K820-K821 – Steadyline® vibration damping Combimaster™ arbors
• With dynamic damping, ready to use
• With through coolant
Design 1 (K820) Design 2 (K821)
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB1 BD BD2 BD1 OAL
HSK-A63M10 E9304K82010185 185,0 159,0 154,2 20,0 18,5 36,6 24,0 217,0 2,8 1 12000 1 PB 1,51
M12 E9304K82012185 185,0 159,0 154,2 20,0 23,0 42,0 29,5 217,0 2,8 1 12000 1 PB 1,90
M16 E9304K82016185 185,0 159,0 154,2 20,0 30,0 59,5 37,0 217,0 2,8 1 10000 1 PB 2,59
M16 E9304K82016235 235,0 209,0 190,6 20,0 30,0 53,0 37,0 267,0 2,8 1 8000 1 PB 3,50
M16 E9304K82116160 160,0 134,0 129,0 22,0 30,0 30,5 30,5 192,0 – 2 10000 1 PB 1,40
M20 E9304K82020185 185,0 159,0 140,2 24,7 36,5 55,7 45,0 217,0 2,7 1 10000 1 PB 3,30
M20 E9304K82020235 235,0 209,0 186,4 24,7 36,5 60,1 45,0 267,0 2,7 1 8000 1 PB 4,30
HSK-A100M12 E9306K82012235 235,0 206,0 201,2 20,0 23,0 46,6 29,5 285,0 2,8 1 8000 1 PB 4,00
M16 E9306K82016235 235,0 206,0 201,2 20,0 30,0 54,0 37,0 285,0 2,8 1 8000 1 PB 4,78
M16 E9306K82016285 285,0 256,0 251,2 20,0 30,0 58,8 37,0 335,0 2,8 1 6000 1 PB 5,86
M16 E9306K82116185 185,0 156,0 151,0 22,0 30,0 30,5 30,5 235,0 – 2 8000 1 PB 2,91
M20 E9306K82020235 235,0 206,0 201,2 24,7 36,5 61,6 45,0 285,0 2,7 1 8000 1 PB 5,70
M20 E9306K82020285 285,0 256,0 251,2 24,7 36,5 66,4 45,0 335,0 2,7 1 6000 1 PB 7,20
Please check availability in current price and stock-list
For HSK sealing plugs, coolant tubes and tube spanners, see Machining Navigator Tooling Catalogue.
HSK-A/ ISO12164-1-HSK-A
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
72
Please check availability in current price and stock-list
For HSK sealing plugs, coolant tubes and tube spanners, see Machining Navigator Tooling Catalogue.
* These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders.
Accessories to be ordered separatelyFor Taper/
DMM
Bolt, through coolant Spanner
DIN40/ 16 5801608L 5811608
DIN40/ 22 5802210L 5812210
DIN50/ 22 5802210L 5812210
DIN50/ 27 5802712L 5812712
DIN50/ 32 5803216L 5813216
DIN50/ 40 5804020L 5814020
HSK-A TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders HSK-A/ ISO12164-1-HSK-A
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in inch
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
inch LF BD BD1 OAL LB LSC
HSK-A630.75 E93045555075750 7.50 1.75 0.00 9.44 6.48 0.69 1 – 1 PB 6.61
0.75 E93045556075900 9.00 1.81 2.23 10.94 7.98 0.69 2 2.2 1 PB 9.70
1.00 E93045555100900 9.00 2.25 0.00 10.94 7.98 0.69 1 – 1 PB 12.13
HSK-A1000.75 E93065555075750 7.50 1.75 0.00 10.15 6.36 0.69 1 – 1 PB 9.48
0.75 E93065556075900 9.00 8.81 2.34 11.65 7.86 0.69 2 2.1 1 PB 12.57
1.00 E93065555100900 9.00 2.25 0.00 11.66 7.86 0.69 1 – 1 PB 14.99
1.00 E93065556100C00 12.00 2.32 3.00 14.65 10.86 0.69 2 1.9 1 PB 23.15
1.50 E93065555150D75 13.75 3.50 0.00 15.72 12.61 0.94 1 – 1 PB 42.55
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
Spare Parts included in deliveryFor d
1Bolt* Screw Tenon
0.75 58211905 950D0312 16C2080712A
1.00 58212540 951D0416 16C2091014A
1.50 58213810 951D0616 16C2151421A
73
Accessories to be ordered separately Spare Parts included in delivery
DIN 69871 TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders DIN 69871-ADB
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in mm
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
mm LF BD BD1 OAL LB LSC
DIN40 ADB16 E3469555516160 160,0 38,0 38,0 245,4 141,0 17,0 1 – 1 PB 2,12
22 E3469555522210 210,0 48,0 48,0 297,4 191,0 19,0 1 – 1 PB 3,74
22 E3469555622260 260,0 48,0 63,2 347,4 241,0 19,0 2 1,9 1 PB 5,56
DIN50 ADB22 E3471555522210 210,0 48,0 48,0 330,7 191,0 19,0 1 – 1 PB 5,36
22 E3471555622260 260,0 48,0 66,0 380,7 241,0 19,0 2 2,0 1 PB 7,52
27 E3471555527260 260,0 60,0 60,0 382,7 241,0 21,0 1 – 1 PB 8,52
27 E3471555627320 320,0 60,0 79,5 442,7 301,0 21,0 2 1,7 1 PB 12,26
32 E3471555532330 330,0 78,0 78,0 455,7 311,0 24,0 1 – 1 PB 14,96
40 E3471555540350 350,0 89,0 89,0 475,7 331,0 27,0 1 – 1 PB 20,40
DMM 40, includes 4 threaded holes on the bearing face according to DIN 6357
Please check availability in current price and stock-list
* These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders
For Taper/
DMM
Bolt, through coolant Spanner
DIN40/ 16 5801608L 5811608
DIN40/ 22 5802210L 5812210
DIN50/ 22 5802210L 5812210
DIN50/ 27 5802712L 5812712
DIN50/ 32 5803216L 5813216
DIN50/ 40 5804020L 5814020
For Taper/
DMM
Bolt* Plug Screw Tenon
DIN40/ 16 5801608 950A0406 950D0312 16C2080810A
DIN40/ 22 5802210 950A0406 950D0416 16C2101111
DIN50/ 22 5802210 950A0606 950D0416 16C2101111
DIN50/ 27 5802712 950A0606 950D0516 16C2121214A
DIN50/ 32 5803216 950A0606 950D0516 16C2141421A
DIN50/ 40 5804020 950A0606 950D0616 16C2161621A
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
74
DIN 69871 TOOL HOLDERS
SECO EPB® K820-K821 – Steadyline® vibration damping Combimaster™ arbors
Spare Parts
Please check availability in current price and stock-list
DIN 69871-ADB
Design 1 (K820) Design 2 (K821)
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster
CTWS LPR LB LB2 LB1 BD BD2 BD1 OAL
DIN40 ADBM12 E3469K82012185 185,0 165,9 – 20,0 23,0 42,7 30,0 253,4 2,8 1 10000 1 PB 2,20
M16 E3469K82016185 185,0 165,9 – 20,0 30,0 50,2 37,0 253,4 2,8 1 10000 1 PB 2,80
M16 E3469K82016235 235,0 215,9 – 20,0 30,0 50,0 37,0 303,4 2,8 1 8000 1 PB 3,70
M16 E3469K82116160 160,0 140,9 135,9 20,0 30,0 30,5 30,5 228,4 – 2 10000 1 PB 1,70
DIN50 ADBM16 E3471K82016235 235,0 215,9 211,1 20,0 30,0 55,0 37,0 336,7 2,8 1 8000 1 PB 5,50
M16 E3471K82016285 285,0 265,9 261,1 20,0 30,0 59,8 37,0 386,7 2,8 1 6000 1 PB 6,60
M16 E3471K82116185 185,0 165,9 160,9 22,0 30,0 30,5 30,5 286,7 – 2 10000 1 PB 3,50
For Taper Plug
DIN40 950A0406
DIN50 950A0606
• With dynamic damping, ready to use
• With through coolant
75
Please check availability in current price and stock-list
Note: Other Steadyline® Combimaster™ sizes exist in non Taper-Face DIN types, see page 74.
DIN 69871 TAPER-FACE TOOL HOLDERS TO COMBIMASTER™
SECO EPB® K820 – Steadyline®, vibration damping Combimaster™ holders DIN Taper-Face
• With dynamic damping, ready to use
• With through coolant
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA°
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB3 LB1 BD2 BD1 BD OAL
DIN TF40 ADBM20 E3269K82020185 185,0 165,9 144,3 29,0 24,7 56,1 45,0 36,5 253,4 2,7 10000 1 PB 3,60
DIN TF50 ADBM20 E3271K82020285 285,0 265,9 264,0 29,0 24,7 67,6 45,0 36,5 386,8 2,7 6000 1 PB 8,00
M20 E3271K82020235 235,0 215,9 211,1 29,0 24,7 62,5 45,0 36,5 336,8 2,7 8000 1 PB 6,50
For Taper Plug
DIN TF40 950A0406
DIN TF50 950A0606
Spare Parts included in delivery
76
CAT TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders
• With dynamic damping, ready to use
• Direct run-out .0002’’(5 μm) maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in inch
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
inch LF BD BD1 OAL LB LSC
CAT40 ADB0.75 E25025555075750 7.50 1.75 0.00 10.88 6.75 0.69 1 – 1 PB 6.92
0.75 E25025556075900 9.00 1.75 2.35 12.38 8.25 0.69 2 1.9 1 PB 10.10
1.00 E25025555100900 9.00 2.25 0.00 12.38 8.25 0.69 1 – 1 PB 13.01
CAT50 ADB 0.75 E25045555075750 7.50 1.75 0.00 12.19 6.75 0.69 1 – 1 PB 11.07
0.75 E25045556075900 9.00 1.75 2.35 13.69 8.25 0.69 2 2 1 PB 13.89
1.00 E25045555100900 9.00 2.25 0.00 13.69 8.25 0.69 1 – 1 PB 17.73
1.00 E25045556100C00 12.00 2.25 3.00 16.69 11.25 0.69 2 1.7 1 PB 24.16
1.50 E25045555150D75 13.75 3.50 0.00 18.70 13.00 0.94 1 – 1 PB 44.09
Please check availability in current price and stock-list
Spare Parts included in deliveryFor d
1Bolt Screw Tenon
0.75 58211905 950D0312 16C2080712A
1.00 58212540 951D0416 16C2091014A
1.50 58213810 951D0616 16C2151421A
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separatelyFor Taper/
DMM
Bolt, through coolant Spanner
DIN40/ 16 5801608L 5811608
DIN40/ 22 5802210L 5812210
DIN50/ 22 5802210L 5812210
DIN50/ 27 5802712L 5812712
DIN50/ 32 5803216L 5813216
DIN50/ 40 5804020L 5814020
77
CAT TAPER-FACE TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders
• With dynamic damping, ready to use
• Direct run-out .0002’’(5 μm) maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in inch
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
inch LF BD BD1 OAL LB LSC
CAT TF40 0.75 E26425556075900 9.00 1.75 2.54 12.38 8.25 0.69 2 2.8 1 PB 9.92
CAT TF50
ADB 0.75 E26445555075750 7.50 1.75 0.00 12.19 6.75 0.69 1 – 1 PB 11.02
0.75 E26445556075900 9.00 1.75 2.52 13.69 8.25 0.69 2 2.6 1 PB 14.55
1.00 E26445555100900 9.00 2.25 0.00 13.69 8.25 0.69 1 – 1 PB 16.53
1.00 E26445556100C00 12.00 2.25 3.00 16.69 11.25 0.69 2 1.8 1 PB 24.25
Please check availability in current price and stock-list
Spare Parts included in deliveryFor d
1Bolt Screw Tenon
0.75 58211905 951D0312 16C2080712A
1.00 58212540 951D0416 16C2091014A
1.50 58213810 951D0616 16C2151421A
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separatelyFor Taper/
DMM
Bolt, through coolant Spanner
DIN40/ 16 5801608L 5811608
DIN40/ 22 5802210L 5812210
DIN50/ 22 5802210L 5812210
DIN50/ 27 5802712L 5812712
DIN50/ 32 5803216L 5813216
DIN50/ 40 5804020L 5814020
78
CAT TO COMBIMASTER™ ADAPTERS
SECO EPB® K820-K821 – Steadyline® vibration damping Combimaster™ arbors
Please check availability in current price and stock-list
Machine
side
Workpiece
side
Designation
Dimensions in inch
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB1 BD BD2 BD1 OAL
CAT40
ADB M12 E2502K82012185 7.28 6.53 5.91 0.79 0.91 1.66 1.18 9.98 2.75 1 10000 1 PB 4.85
M16 E2502K82116160 6.30 5.55 4.92 – 1.20 – – 8.99 - 2 10000 1 PB 3.97
M16 E2502K82016185 7.28 6.53 5.91 0.79 1.17 1.92 1.46 9.98 2.75 1 10000 1 PB 5.95
M16 E250K82016235 9.25 8.50 7.87 0.79 1.18 2.09 1.46 11.94 2.75 1 8000 1 PB 7.94
CAT50
ADB M16 E2504K82116185 7.28 6.53 5.91 – 1.20 – – 11.29 – 2 10000 1 PB 8.60
M16 E2504K82016235 9.25 8.50 7.87 0.79 1.18 2.12 1.46 13.26 2.75 1 8000 1 PB 12.57
M16 E2504K82016285 11.22 10.47 9.84 0.79 1.18 2.31 1.46 15.23 2.75 1 6000 1 PB 14.77
Design 1 (K820)
Design 2 (K821)
• With dynamic damping, ready to use
• With through coolant
For Taper Plug
BT40 950A0406
BT50 950A0606
Spare Parts included in delivery
79
Machine
side
Workpiece
side
Designation
Dimensions in inch
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB1 BD BD2 BD1 OAL
CAT TF40
ADB M12 E2642K82012185 7.28 6.53 6.33 0.79 0.91 1.72 1.18 9.98 2.8 1 10000 1 PB 4.85
M16 E2642K82116160 6.30 5.55 5.35 0.87 1.18 – 1.20 8.99 - 2 10000 1 PB 3.97
M16 E2642K82016185 7.28 6.53 6.33 0.79 1.18 1.99 1.46 9.98 2.8 1 10000 1 PB 6.17
M16 E2642K82016235 9.25 8.50 8.30 0.79 1.18 2.18 1.46 11.94 2.8 1 8000 1 PB 8.38
M20 E2642K82020185 7.28 6.53 5.89 0.97 1.44 2.23 1.77 9.98 2.7 1 10000 1 PB 7.94
M20 E2642K82020235 9.25 8.50 7.87 0.79 1.44 2.42 1.77 11.94 2.7 1 8000 1 PB 10.36
CAT TF50
ADB M16 E2644K82116185 7.28 6.53 6.33 0.87 1.18 - 1.20 11.29 - 2 10000 1 PB 7.94
M16 E2644K82016235 9.25 8.50 8.30 0.79 1.18 2.18 1.46 13.26 2.8 1 8000 1 PB 12.35
M16 E2644K82016285 11.22 10.47 0.27 0.79 1.18 2.37 1.46 15.22 2.8 1 6000 1 PB 14.77
M20 E2644K82020235 9.25 8.50 8.31 0.97 1.44 2.46 1.77 13.26 2.7 1 8000 1 PB 14.33
M20 E2644K82020285 11.22 10.47 10.28 0.97 1.44 2.65 1.77 15.22 2.7 1 6000 1 PB 17.64
PB 7.94
CAT TAPER-FACE TOOL HOLDERS TO COMBIMASTER™ ADAPTERS
SECO EPB® K820-K821 – Steadyline® vibration damping Combimaster™ arbors
Design 1 (K820)
Design 2 (K821)
Please check availability in current price and stock-list
• With dynamic damping, ready to use
• With through coolant
For Taper Plug
BT40 950A0406
BT50 950A0606
Spare Parts included in delivery
80
BT JIS TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders BT JIS B 6339-ADB
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in mm
Design BHTA°
RFID
hole
Balan-
cingTaper
DMM
mm LF BD BD1 OAL LB LSC
BT40 ADB16 E3414555516160 160,0 38,0 38,0 242,4 133,0 17,0 1 – 1 PB 2,23
22 E3414555522210 210,0 48,0 48,0 294,4 183,0 19,0 1 – 1 PB 3,78
22 E3414555622260 260,0 48,0 60,0 344,4 233,0 19,0 2 1,3 1 PB 5,40
27 E3414555527260 260,0 60,0 60,0 346,4 233,0 21,0 1 – 1 PB 6,86
BT50 ADB22 E3416555522210 210,0 48,0 48,0 330,8 172,0 19,0 1 – 1 PB 6,08
22 E3416555622260 260,0 48,0 64,0 380,8 222,0 19,0 2 1,9 1 PB 7,90
27 E3416555527260 260,0 60,0 60,0 382,8 222,0 21,0 1 – 1 PB 9,06
27 E3416555627320 320,0 60,0 80,0 442,8 282,0 21,0 2 1,9 1 PB 12,64
32 E3416555532330 330,0 78,0 78,0 455,8 292,0 24,0 1 – 1 PB 15,34
40 E3416555540350 350,0 89,0 89,0 475,8 312,0 27,0 1 – 1 PB 20,70
DMM 40, includes 4 threaded holes on the bearing face according to DIN 6357
For Taper/
DMM
Bolt, through coolant Spanner
BT40/ 16 5801608L 5811608
BT40/ 22 5802210L 5812210
BT40/ 27 5802712L 5812712
BT50/ 22 5802210L 5812210
BT50/ 27 5802712L 5812712
BT50/ 32 5803216L 5813216
BT50/ 40 5804020L 5814020
Accessories to be ordered separatelyFor Taper/
DMM
Bolt* Plug Screw Tenon
BT40/ 16 5801608 950A0406 950D0312 16C2080810A
BT40/ 22 5802210 950A0406 950D0416 16C2101111
BT40/ 27 5802712 950A0406 950D0516 16C2121214A
BT50/ 22 5802210 950A0606 950D0416 16C2101111
BT50/ 27 5802712 950A0606 950D0516 16C2121214A
BT50/ 32 5803216 950A0606 950D0516 16C2141421A
BT50/ 40 5804020 950A0606 950D0616 16C2161621A
Spare Parts included in delivery
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Please check availability in current price and stock-list
* These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders.
81
BT JIS TAPER-FACE TOOL HOLDERS
SECO EPB® 5555 – Steadyline®, vibration damping shell mill holders BT Taper-Face
For Bolt, through coolant Spanner
E3214555522210 5802210L 5812210
E3214555527260 5802712L 5812712
E3216555532330 5803216L 5813216
E3216555540350 5804020L 5814020
For Bolt* Plug Screw Tenon
E3214555522210 5802210 950A0406 950D0416 16C2101111
E3214555527260 5802712 950A0406 950D0516 16C2121214A
E3216555532330 5803216 950A0606 950D0516 16C2141421A
E3216555540350 5804020 950A0606 950D0616 16C2161621A
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
Machine
side
Workpiece
side
Designation
Dimensions in mm
Max.
RPM
RFID
hole
Balan-
cingTaper
DMM
mm LF BD OAL LB LSC
BT TF40 ADB22 E3214555522210 210,0 48,0 294,4 183,0 19,0 8000 1 PB 3,80
27 E3214555527260 260,0 60,0 346,4 233,0 21,0 6000 1 PB 6,90
BT TF50 ADB32 E3216555532330 330,0 78,0 455,8 292,0 24,0 4000 1 PB 15,30
40 E3216555540350 350,0 89,0 478,8 312,0 27,0 3100 1 PB 20,70
DMM 40, includes 4 threaded holes on the bearing face according to DIN 6357
Accessories to be ordered separately:
4 = Bolt, through coolantSpare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately Spare Parts included in delivery
Please check availability in current price and stock-list
* These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders.
82
BT JIS TO COMBIMASTER™
SECO EPB® K820-K821 – Steadyline® vibration damping Combimaster™ arbors BT JIS B 6339-ADB
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB4 LB1 BD BD2 BD1 OAL
BT40 ADBM12 E3414K82012185 185,0 158,0 153,2 24,0 20,0 23,0 41,9 30,0 250,4 2,8 1 10000 1 PB 2,20
M16 E3414K82016185 185,0 158,0 153,2 24,0 20,0 30,0 49,4 37,0 250,4 2,8 1 10000 1 PB 2,80
M16 E3414K82016235 235,0 208,0 203,2 24,0 20,0 30,0 54,2 37,0 300,4 2,8 1 8000 1 PB 3,70
M16 E3414K82116160 160,0 133,0 128,0 – 22,0 30,0 30,5 30,5 225,4 – 2 10000 1 PB 1,80
BT50 ADBM16 E3416K82016235 235,0 197,0 192,2 24,0 20,0 30,0 53,2 37,0 336,8 2,8 1 8000 1 PB 6,10
M16 E3416K82016285 285,0 247,0 242,2 24,0 20,0 30,0 57,0 37,0 386,8 2,8 1 6000 1 PB 7,20
M16 E3416K82116185 185,0 147,0 142,0 – 22,0 30,0 30,5 30,5 286,8 – 2 10000 1 PB 4,40
For Taper Plug
BT40 950A0406
BT50 950A0606
Spare Parts included in delivery
Please check availability in current price and stock-list
• With dynamic damping, ready to use
• With through coolant
Design 1 (K820)
Design 2 (K821)
83
BT JIS TAPER-FACE TOOL HOLDERS TO COMBIMASTER™
SECO EPB® K820 – Steadyline®, vibration damping Combimaster™ holders BT Taper-Face
• With dynamic damping, ready to use
• With through coolant
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA° RPMX
RFID
hole
Balan-
cingTaper
Combimaster™
CTWS LPR LB LB2 LB3 LB1 BD2 BD1 BD OAL
BT TF40 ADBM20 E3214K82020185 185,0 158,0 156,1 29,0 24,7 57,2 45,0 36,5 250,4 2,7 10000 1 PB 3,70
BT TF50 ADBM20 E3216K82020235 235,0 197,0 192,2 29,0 24,7 60,7 45,0 36,5 336,8 2,7 8000 1 PB 7,10
M20 E3216K82020285 285,0 247,0 242,2 29,0 24,7 65,5 45,0 36,5 386,8 2,7 6000 1 PB 8,50
Please check availability in current price and stock-list
Note: Other Steadyline® Combimaster™ sizes exist in non Taper-Face BT types, see page 82.
For Taper Plug
BT TF40 950A0406
BT TF50 950A0606
Spare Parts included in delivery
84
SECO-CAPTO™ TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders Seco-Capto™
Machine
side
Workpiece
side
Designation
Dimensions in mm
Design BHTA°
RFID
hole
Balan-
cing
Seco-Capto™
shank
DMM
mm LF BD BD1 OAL LB LSC
C616 C6-391.5555-16160 160,0 38,0 38,0 215,0 135,0 17,0 1 – 1 PB 2,1
22 C6-391.5555-22210 210,0 48,0 48,0 267,0 185,0 19,0 1 – 1 PB 3,6
22 C6-391.5556-22260 260,0 48,0 60,0 317,0 235,0 19,0 2 1,3 1 PB 4,0
27 C6-391.5555-27260 260,0 60,0 60,0 319,0 235,0 21,0 1 – 1 PB 6,8
C822 C8-391.5555-22210 210,0 48,0 48,0 277,0 177,0 19,0 1 – 1 PB 4,5
22 C8-391.5556-22260 260,0 48,0 64,0 327,0 227,0 19,0 2 1,8 1 PB 6,4
27 C8-391.5555-27260 260,0 60,0 60,0 329,0 227,0 21,0 1 – 1 PB 7,6
27 C8-391.5556-27320 320,0 60,0 75,0 389,0 287,0 21,0 2 1,3 1 PB 10,6
32 C8-391.5555-32330 330,0 78,0 78,0 402,0 297,0 24,0 1 – 1 PB 20,0
40 C8-391.5555-40350 350,0 89,0 89,0 422,0 317,0 27,0 1 – 1 PB 19,0
DMM 40, includes 4 threaded holes on the bearing face according to DIN 6357
Please check availability in current price and stock-list
* These centre bolts are similar to the original delivered ones: check if lengths are suitable for the milling cutters used, therefore see in the Operating instructions sheet
delivered with the holders.
For DMM Bolt, through coolant Spanner
16 5801608L 5811608
22 5802210L 5812210
27 5802712L 5812712
32 5803216L 5813216
40 5804020L 5814020
Accessories to be ordered separatelyFor DMM Bolt* Screw Tenon
16 5801608 951D0312 16C2080810A
22 5802210 951D0416 16C2101111
27 5802712 951D0516 16C2121214A
32 5803216 951D0516 16C2141421A
40 5804020 951D0616 16C2161621A
Spare Parts included in delivery
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt*
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
85
SECO-CAPTO™ TOOL HOLDERS TO COMBIMASTER™
SECO EPB® K820-K821 – Steadyline®, vibration damping Combimaster™ holders Seco-Capto™
Machine
side
Workpiece
side
Designation
Dimensions in mm
BHTA° Design
Max.
RPM
RFID
hole
Balan-
cing
Seco-Capto™
shank
Combimaster™
CTWS LPR LB LB2 LB1 BD BD2 BD1 OAL
C6M12 C6-391.K820-12185 185,0 160,0 155,2 20,0 23,0 42,1 30,0 223,0 2,8 1 10000 1 PB 2,10
M16 C6-391.K820-16185 185,0 160,0 155,2 20,0 30,0 49,6 37,0 223,0 2,8 1 10000 1 PB 2,80
M16 C6-391.K820-16235 235,0 210,0 205,2 20,0 30,0 54,4 37,0 273,0 2,8 1 8000 1 PB 3,60
M16 C6-391.K821-16160 160,0 135,0 130,0 22,0 30,0 30,5 30,5 198,0 – 2 10000 1 PB 0,70
M20 C6-391.K820-20185 185,0 160,0 158,1 24,7 36,5 57,4 45,0 223,0 2,7 1 10000 1 PB 3,60
M20 C6-391.K820-20235 235,0 210,0 209,6 24,7 36,5 62,4 45,0 273,0 2,7 1 8000 1 PB 4,60
Please check availability in current price and stock-list
• With dynamic damping, ready to use
• With through coolant
Design 1 (K820)
Design 2 (K821)
86
SECO-CAPTO™ TOOL HOLDERS
SECO EPB® 5555/5556 – Steadyline®, vibration damping shell mill holders Seco-Capto™
DMM 40, includes 4 threaded holes on the bearing face according to DIN 6357
Please check availability in current price and stock-list
Spare Parts included in delivery
Design 2 (5556)Design 1 (5555)
Spare Parts included in delivery:
1 = Bolt
2 = Tenon/Screw
Accessories to be ordered separately:
4 = Bolt, through coolant
For d1
Bolt Screw Tenon
0.75 58211905 951D0312 16C11905
1.00 58212540 951D0416 16C12540
1.50 58213810 951D0616 16C2151421A
Machine
side
Workpiece
side
Designation
Dimensions in inch
Design BHTA°
RFID
hole
Balan-
cing
Seco-Capto™
shank
DMM
inch LF BD BD1 OAL LB LSC
C60.75 C6-391.5555-075750 7.5 1.75 0.00 9.00 6.52 0.69 1 – 1 PB 6.77
0.75 C6-391.5556-075900 9.00 1.75 2.35 11.19 8.02 0.69 2 2 PB 10.14
1.00 C6-391.5555-100900 9.00 2.25 0.00 11.19 8.02 0.69 1 – 1 PB 12.79
C80.75 C8-391.5556-075900 9.00 1.75 2.35 11.58 7.86 0.69 2 2.1 1 PB 11.68
1.00 C8-391.5556-100C00 12.00 2.25 3.05 14.58 10.82 0.69 2 2 1 PB 22.71
1.50 C8-391.5555-150D75 13.75 3.50 0.00 16.58 12.57 0.94 1 – 1 PB 41.67
• With dynamic damping, ready to use
• Direct run-out 5 μm maximum • With coolant supply channels through the spigot
87
CUSTOMTOOLING
INDIVIDUAL SOLUTIONS ENGINEERED FOR YOU
SECO® CUSTOM TOOLING
While most operations can be optimised through the enormous range of standard products of Seco®, the rapid rate of change in today’s industry some-times results in applications that demand more. Seco® Custom Tooling offers strategic support backed by global expertise across all industry segments.
Working closely with your engineers and operators, our team analyses your application, develops a complete understanding of your challenges, and then creates the perfect solution for them. From proposal to product delivery, Seco® Custom Tooling brings increased productivity and profitability to the most difficult manufacturing scenarios.
87
WW
W.SEC
OTO
OLS.C
OM
WWW.SECOTOOLS.COM
03241939, ST20186653 GB, © SECO TOOLS AB,
2018. All rights reserved. Technical specifications are subject to change without notice.