2x 18" Carbon Fiber Rod (Extended Option) 4x 9" Carbon Fiber Rod (Quick-Release Option) ultraCage (Front) 4” Grip Rod ultraCage Rear Chassis 2x 14" Carbon Fiber Rod microMount with Cold Shoe OR powerPack backPack microFollowFocus | blue Studio microMattebox Double Top Handle and Thumbscrew DoubleTap http://start.redrockmicro.com Tutorials, forums, customer support ultraCage | blue Studio BASIC Bundle Components ultraCage | blue Studio SETUP GUIDE REDROCK MICRO Title: Scene: Company: Pages: of Date: 1 04.01.12 1 create the cinema experience ultraCage | blue Studio Additional Options D A C B E F G H I E: Attach backPack to Rear Chassis. F: Attach Top Handle. See above note. G: Screw powerPack into place on cage. H: Attach microFollowFocus | blue studio to rig. I: Add a microMattebox to complete your rig. ultraCage | blue Studio BASIC and DELUXE Bundles ADDITIONAL OPTIONS Note: when using Top Handle, Triangle Thumb screw replaces 1/4-20 x 3/8” screw at top of cage into camera A: Insert 14” Rods into top clamps of both front and rear cage. B: Attach microMount fitted with Cold Shoe to 4” Grip Rod, then to top rail. Attach C300/C500 external monitor to Cold Shoe. C: QUICK RELEASE option: Insert four 9” Rods into ultraCage as shown. This makes it easy to toggle between handheld and studio modes. D: EXTENDED option: Insert 18” Rods into bottom clamps of ultraCage. For studio mode, this provides maximum stability.