12" Carbon Fiber Rod ultraCage 9" Carbon Fiber Rod microBrace microBrace Retainer Knob microMount Hand Grips microFollowFocus | blue powerPack Top Handle and Thumbscrew 2x 6” Carbon Fiber Rods DoubleTap http://start.redrockmicro.com Tutorials, forums, customer support ultra Event BASIC Bundle Components ultra Event for Canon EOS C300/C500 SETUP GUIDE REDROCK MICRO Title: Scene: Company: Pages: of Date: 1 04.01.12 1 create the cinema experience ultra Event Additional Options D A C B E F G H E: Attach Top Handle. See above note. F: Insert 6” Carbon Fiber Rods into ultraCage. G: Attach microFollowFocus | blue to rig and microLens Gear to camera lens. H: Screw powerPack into place on cage. ultra Event BASIC and DELUXE Bundles ADDITIONAL OPTIONS COMPLETE BASIC ultra Event ASSEMBLY Note: when using Top Handle, Triangle knob screw replaces 1/4-20 x 3/8” screw at top of cage into camera. A: Attach microBrace to microMount by tightening Retainer knob. B: Insert 12” and 9” Carbon Fiber Rods into ultraCage as shown. C: Tighten microMount with microBrace onto 12” Rod. D: Add Blue Handgrips to both rods in front.