Recap Issues of notation δ vs. R vs. F vs. %F (last three are exact) Isotope ecology is balance between fractionation & mixing Fractionation: δ vs. Δ vs. ε Equilibrium vs. kinetic Equilibrium, closed: phase plots, mass balance equations Equilibrium, open: Rayleigh equations Kinetic, closed: Rayleigh equations Kinetic, open (simple): mass flow equations
22
Embed
Recap Issues of notation δ vs. R vs. F vs. %F (last three are exact)
Recap Issues of notation δ vs. R vs. F vs. %F (last three are exact) Isotope ecology is balance between fractionation & mixing Fractionation: δ vs. Δ vs. ε Equilibrium vs. kinetic Equilibrium, closed: phase plots, mass balance equations Equilibrium, open: Rayleigh equations - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RecapIssues of notation
δ vs. R vs. F vs. %F (last three are exact)
Isotope ecology is balance between fractionation & mixing
Fractionation: δ vs. Δ vs. εEquilibrium vs. kineticEquilibrium, closed: phase plots, mass balance equationsEquilibrium, open: Rayleigh equationsKinetic, closed: Rayleigh equationsKinetic, open (simple): mass flow equations
Kinetic Fractionation, Open System
Consider a system with 1 input and 2 outputs (i.e., a branching system). At steady state, the amount of R entering the system equals the amounts of products leaving: R = P + Q. A similar relationship holds for isotopes: δR = δPfP + (1-fP)δQ. Again, this should look familiar; it is identical to closed system, equilibrium behavior, with exactly the same equations:δP = δR + (1-fP)(δP-δQ) = δR + (1-fP)εP/Q
δQ = δR - fPεP/Q
Open Systems at Steady State
Open system approaching steady state
δ1 = 0From mass balance at steady state: δ1 = δ2
Yet δ2 = δB - ε2 = δB - 25, so δB = +25‰
Note that for Hayes (and most biologists):δR-δP=εR/P, so ε is a positive number for kinetic isotope effects.Above, δP = δR-εR/P
εR/P = 1000lnR/P
R/P = (1000+ δR )/(1000+ δP)
Nier-type mass Spectrometer
Ion Source Gas molecules ionized to + ions by e- impact Accelerated towards flight tube with k.e.: 0.5mv2 = e+V where e+ is charge, m is mass, v is velocity, and V is voltage
Magnetic analyzer Ions travel with radius: r = (1/H)*(2mV/e+)0.5
where H is the magnetic field higher mass > r
Counting electronics
Dual Inlet sample and reference analyzed alternately 6 to 10 x viscous flow through capillary change-over valve 1 to 100 μmole of gas required highest precision
Continuous Flow sample injected into He stream cleanup and separation by GC high pumping rate 1 to 100 nanomoles gas reference gas not regularly altered with samples loss of precision
ISOTOPES IN LAND PLANTS
C3 vs. C4 vs. CAM
Cool season grassmost trees and shrubs
Warm season grassArid adapted dicots
Cerling et al. 97Nature
δ13C
C3 - C4 balance varies with climate
Tieszen et al.
Ecol. Appl. (1997) Tieszen et al. Oecologia (1979)
δ13C varies with environment within C3 plants
C3 plants
εt = 4.4‰εf = 27‰
φ1,δ1
φ3,δ3
δi, Ci
Int CO2
δf
3(CH2O)
φ2,δ2 ,εf
εt
δa, Ca
Atm CO2 Rubisco
Plus some logic that flows from how flux relates to concentration φ1 C∝ a φ3 C∝ i φ3/φ1 = Ci/Ca φ2/φ1 = 1 - Ci/Ca
Want our equation in terms of substances that can be measuredSome key equations for substitutions
In C4, L is ~ 0.3, so εp is insensitive to Ci/Ca, typically with values less than
those for εta.
εp = εta+[εPEP-7.9+L(εf-εtw)-εta](Ci/Ca)
Under arid conditions, succulent CAM plants use PEP to fix CO2 to malate at night and then use RUBISCO for final C fixation during the daytime. The L value for this is typically higher than 0.38. Under more humid conditions, they will directly fix CO2 during the day using RUBISCO. As a consequence, they have higher, and more variable, εp values.