65 WWW.CONAIRGROUP.COM 1.800.458.1960 US 800.458.1960 • International +1 814.437.6861 • Email [email protected] Pump Seal Kits For Water Pumps and MicroKool Chillers Part Number Pump Type Description 09000358 12CS 5/8" EPDM Carbide/Carbide up to 300° F 09000359 50CS 1-1/2" EPDM Carbide/Carbide up to 300° F 09000751 11C, 12C 5/8" EPDM Silicon up to 250° F 09000752 50C 1-1/2" EPDM Silicon up to 250° F 09000851 55F-20 Hp, 56F-20 and 25 Hp 1-3/4" BUNA Ceramic up to 180° F 09001488 50, 52, 54F, 55F-10 Hp, 56F-15 Hp 1-1/2" BUNA Ceramic up to 180° F 09003085 15, 16 - 1-1/2 and 2 Hp, 18 1-1/2" BUNA Ceramic up to 180° F 09003262* 11, 16 - 1/3 through 2 Hp* 5/8" BUNA Ceramic up to 180° F 09003271 63 1-3/4" BUNA Ceramic up to 180° F 09003324 57 1-3/4" BUNA Ceramic up to 180° F 09003406 62 1-1/2" BUNA Ceramic up to 180° F 09003407 96 1-3/4" BUNA Ceramic up to 180° F 09003408 102 1-3/4" BUNA Ceramic up to 180° F 09003409 103 1-3/4" BUNA Ceramic up to 180° F 09003416 68, 69 5/8" EPDM Silicon Carbide up to 250° F Note: Seal kits include nut, flinger, case gasket, washer, seal and lubrication. Depending on seal kit ordered it may also include shaft sleeve, impeller retainer, key, o-ring, and seal retainer. * Pump Type 16: 1/3 through 2 Hp for microKool chillers only. Pump Seal Kit