Public Auction - Asset Sales INSPECTION DATE & TIME – WEDNESDAY, JULY 26TH FROM 8:00 A.M. - 4:00 P.M. EDT 4 DRILL & TAP CENTER FANUC Robo Drill Model Mate High Speed Drill / Tap

Turn

in

g Your Assets into Dollars

Public AuctionPLANT

CLOSED

EVERYTHING

MUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax [email protected]

PLANT CLOSED

VERO MACHINE INDUSTRIESCNC AEROSPACE MANUFACTURER

5400 85TH STREET - VERO BEACH, FL 32967THURSDAY, JULY 27TH @ 10:00 A.M. EDT

Inspection: Wednesday, July 26th, From 8:00 A.M. - 4:00 P.M. EDT

>FANUC ROBO DRILL

MATE HIGH SPEED DRILL / TAP / LIGHT

MILLING CENTER

(2) KITAMURA MYCENTER 3X CNC VERTICAL MACHINING CENTERS

MATSUURA MC800 VGII 4-AXIS CNC VERTICAL MACHINING CENTER

MORI SEIKI NL 2500 Y / 700 CNC TURNING CENTER WITH MILLING

2007

2001

2AVAIL.

YAXIS

2010

107386_Vero.indd 1 6/29/17 9:59 AM

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 26TH FROM 8:00 A.M. - 4:00 P.M. EDT

2

TAKUMI V15A VERICAL MACHINING CENTER

MATSUURA MC800 VF CNC VERTICAL MACHINING CENTER

MATSUURA MC800 VGII 4-AXIS CNC VERTICAL MACHINING CENTER

MATSUURA MC660 VG CNC VERTICAL MACHINING CENTER

(2) MATSUURA RAIIF CNC VERTICAL MACHINING CENTERS WITH PALLET CHANGERS

(2) MATSUURA RAIIF CNC VERTICAL MACHINING CENTERS WITH PALLET CHANGERS

2AVAIL.

2001

2001

107386_Vero.indd 2 6/29/17 9:59 AM

AUCTION SALE DATE & TIME – THURSDAY, JULY 27TH @ 10:00 A.M. EDT

3

Download a lot book at www.asset-sales.com

(2) KITAMURA MYCENTER 3X CNC VERTICAL MACHINING CENTERS

KITAMURA MYCENTER 3 CNC VERTICAL MACHINING CENTER

2AVAIL.

CNC VERTICAL MACHINING CENTERSTAKUMI Model V15A CNC Vertical Machining Center with 64” x 27” Table, CAT #50 Taper Spindle Speeds to 5,000 RPM, 57” X-Axis, 27” Y-Axis, 27” Z-Axis Travel, 32 Position ATC, FANUC Series O-M CNC Control, sn:H0560, mfg.11/1998

MATSUURA Model MC800 VGII 4-Axis CNC Vertical Machining Center with 46” x 20” Table, BT #40 Taper Spindle Speeds to 10,000 RPM, 31” X-Axis, 20” Y-Axis, 19.6 Z-Axis Travel, 30 Position ATC, YASNAC CNC Control, sn:010514776, mfg.07/2001

MATSUURA Model MC800 VF CNC Vertical Machining Center with 45” x 16” Table, BT #40 Taper Spindle Speeds to 8,000 RPM, 31” X-Axis, 20” Y-Axis, 19.6” Z-Axis Travel, 30 Position ATC, YASNAC CNC Control, sn:960812040, mfg.09/1996

MATSUURA Model MC660 VG CNC Vertical Machining Center with 37” x 18” Table, BT #40 Taper Spindle Speeds to 10,000 RPM, 26” X-Axis, 18” Y-Axis, 19” Z-Axis, 30 Position ATC, YSANAC CNC Control, sn:010514736, mfg.2001

CNC VERTICAL MACHINING CENTERS WITH PALLET CHANGERS

(2) MATSUURA Model RAIIF CNC Vertical Machining Centers with Pallet Changers, Through Spindle Coolant, (2) 23” x 14” Pallet Work Tables, BT #40 Taper Spindle Speeds to 6,000 RPM, 23” X-Axis, 16” Y-Axis, 18” Z-Axis, 30 Position ATC, YASNAC CNC Controls, sn:940110586, mfg.05/1994 ● sn:950611544, mfg.01/1996

(2) KITAMURA MyCenter 3X CNC Vertical Machining Centers (1) with Pallet Changer (2) 35” x 16” Pallet Work Tables, # 40 Taper Spindle Speeds to 10,000 RPM, 30” X-Axis, 18” Y-Axis, 20” Z-Axis Travel, 24 Position ATC, FANUC 0-M CNC Controls, sn:11906 (with Pallet Changer) ● sn:11402 (no Pallet Changer)

KITAMURA MyCenter 3 CNC Vertical Machining Center with Pallet Changer, (2) 43” x 20” Pallet Work Tables, Approx. 32” X-Axis, 18” Y-Axis, 18” Z-Axis Travel, #40 Spindle Taper Speeds to 10,000 RPM, 32 Position ATC, KITAMURA CNC Controls, sn:20942

FANUC ROBODRILL MATE HIGH SPEED DRILL / TAP / LIGHT MILLING CENTER

2007

ATTENDING THE AUCTION IN PERSON?

What you need to bring.....• Your Driver’s License

• Business Card• Tax Exempt Form if Non

Taxable• Bank Letter of Guarantee

if Paying via Company Check

107386_Vero.indd 3 6/29/17 9:59 AM

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 26TH FROM 8:00 A.M. - 4:00 P.M. EDT

4

DRILL & TAP CENTERFANUC Robo Drill Model Mate High Speed Drill / Tap / Light Milling Center with 25” x 15” Table, # 30 Taper Spindle Speeds to 10,000 RPM, 16” X-Axis, 12” Y-Axis, 12.9” Z-Axis Travel, 14 Position ATC, FANUC Series Oi-MC CNC Control, sn:071VN199, mfg.01/2007

CNC TURNING CENTERSMORI SEIKI Model NL 2500 Y / 700 CNC Turning Center with Milling, 10” Hydraulic Power Chuck, Collet Chuck, (may be sold separate), Y-Axis, Spindle Speeds to 4,000 RPM, 25” Swing x 30” Center Distance, 3-1/8” Bar Capacity, 12 Position Turret, Tailstock, Parts Catcher, Tool Presetter, MORI SEIKI MSC-850 III CNC Control, sn:NL251JA5256, mfg.3/2010

(2) NAKAMURA TOME Model TW-10 6-Axis Twin Spindle CNC Turning Centers with Milling, 6” Hydraulic Chucks, 1-5/8” Collet Capacities, 12 Position Turrets, Spindle Speeds to Approx. 6,000 RPM, 30” Distance Between Spindles, Parts Catchers, SMW Spacesaver 2200 Magazine Barfeeders (may be sold separate) FANUC 18T CNC Control, sn:K-0501 ● FANUC 16-TT CNC Control, sn:K-0351

METHODS Model Slant 50 CNC Turning Center with 10” Hydraulic Chuck, 32” Distance to Tailstock, Spindle Speeds to Approx. 3,500 RPM, 2-1/2” Bar Capacity, 10 Position Turret, YASNAC CNC Control, sn:93030

NAKAMURA TOME Model TMC15 CNC Turning Center with 8” Hydraulic Chuck, 18” Distance to Tailstock, Spindle Speeds to Approx. 6,000 RPM, 10 Positions, Turret, FANUC O-I CNC Control, sn:F04401

KIA Model KT-15 CNC Turning Center with 6” Hydraulic Chuck, 20” Distance to Tailstock, Spindle Speeds to Approx. 5,000 RPM, 12 Position Turret, YASNAC CNC Controls, sn:KT15173

CNC & MANUAL MILLING MACHINES

PROTOTRAK Model DPM 3-Axis CNC Bedmill with 50” x 10” Table, #40 Taper Spindle Speeds to 4,200 RPM, Manual / CNC Operation, TRAK A.G.E.3 CNC Pendant Control, sn:97-2676

PROTOTRAK EDGE Model K3 2-Axis CNC Bedmill with 50” x 10” Table, #40 R-8 Snapchange Spindle Speeds Variable to 4,200 RPM, Manual / CNC Operation, PROTOTRAK EDGE CNC Pendant Control, sn:4497

BRIDGEPORT Milling Machine with 36” x 9” Power Feed Table, R-8 Spindle Speeds to 2720 RPM, sn:64642

BRIDGEPORT 2-Axis CNC Kneemill with 42” x 9” Table, R-8 Snapchange Spindle Speeds Variable to 4,200 RPM, Power Drawbar & PROTOTRAK MX2 CNC Pendant Control, sn:218483

MORI SEIKI NL2500 Y / 700 CNC TURNING CENTER WITH MILLING

(2) NAKAMURA TOME TW-10 6-AXIS TWIN SPINDLE CNC TURNING CENTERS

2AVAIL.

2010

Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can

Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.

YAXIS

107386_Vero.indd 4 6/29/17 9:59 AM

AUCTION SALE DATE & TIME – THURSDAY, JULY 27TH @ 10:00 A.M. EDT

5

METHODS SLANT 50 CNC TURNING CENTER KIA KT-15 CNC TURNING CENTER

NAKAMURA TOME TMC15 CNC TURNING CENTER

PROTOTRAK EDGE K3 2-AXIS CNC BEDMILL

BRIDGEPORT MILLING MACHINEBRIDGEPORT 2-AXIS CNC KNEEMILL

Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.com For More

Bidding Options. Check Out Our Upcoming Auction Calendar! You Can Also Sign Up to Receive Email Notifications by Joining Our

Mailing List!

Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great

Finder’s Fees!

107386_Vero.indd 5 6/29/17 9:59 AM

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 26TH FROM 8:00 A.M. - 4:00 P.M. EDT

6

ENGINE LATHESCLAUSING 15” x 48” Engine Lathe with 9” 3-Jaw Chuck, 2” Bore, Spindle Speeds to 1,200 RPM, Chip Pan, Threading, sn:30976

MEUSER 18” x 32” Engine Lathe with 12” 3-Jaw Chuck, 2” Bore, Spindle Speeds to 1,800 RPM, Chip Pan, Inch / Metric Threading, sn:MOL-36965

HARDINGE Model HLVH Super Precision Engine Lathe with 1” Bore, Spindle Speeds Variable to 3,000 RPM, 5 ‘C’ Collet Closer, Variable Saddle Speeds, Threading, sn:HLV-H-13717-T

VIBRATORY FINISHERALMCO 42’ Diameter Vibratory Finishing Mill with Parts Door and Controls

BANDSAWS(2) POWERMATIC 19.5” Vertical Bandsaws with 24” x 24” Tilt Worktable, Variable Blade Speeds, sn:787258 ● sn:N/A

HYD-MECH Model S-20A Automatic Mitre Cutting Horizontal Bandsaw with Dual Vise, Discharge Table, Variable Feeds & Force & PLC Programmable Control, sn:8B1210145, mfg.2012

DO-ALL Model C916M 9” x 16” Horizontal Bandsaw with Automatic Vise, Manual Barfeed, Discharge Table & Variable Blade Speeds, sn:489-92381

CLAUSING 15" X 48" ENGINE LATHE MEUSER 18" X 32" ENGINE LATHE

HARDINGE HLVH SUPER PRECISION ENGINE LATHE ALMCO 42' DIAMETER VIBRATORY FINISHING MILL

(2) POWERMATIC 19.5" VERTICAL BANDSAWS DO-ALL C196M 9" X 16" HORIZONTAL

2AVAIL.

107386_Vero.indd 6 6/29/17 9:59 AM

AUCTION SALE DATE & TIME – THURSDAY, JULY 27TH @ 10:00 A.M. EDT

7

BELT SANDER, FABRICATINGTIMESAVER Model V2118 18” Belt Sander with Dust Collector, sn:5456

NATIONAL 50” Power Shear with (2) Sheet Support Arms & Remote Foot Pedal Actuator

INSPECTIONWENZEL Model LH108 CNC Coordinate Measuring Machine with 82” L x 50” W x 30” H Capacity, RENISHAW PH10M Probe, Remote Joystick Pendant Control, Computer with Open DMIS XSPECT Software, sn:075424, mfg.2007

BROWN & SHARPE Microval Coordinate Measuring Machine with 20” L x 16” W x 12” H Capacity, MIP RENISHAW Probe, Air Bearings Computer, sn:0496-10252

GAGE MASTER Model 29/GMXIES 12” Optical Comparator with GAGE MASTER GMX Control & Readout, sn:1466861290

TESA HITE 350 Digital Height Gage, sn:2T02302

MITUTOYO QM-HT600 Height Gauges ● Tombstones ● Oil Separator (Wiz Junior) ● Other Height Gauges, Indicator Stands, Calipers, Bore Gauges, Micrometers, Inside Micrometers, Etc.

HYD-MECH S-20A AUTOMATIC MITRE CUTTING HORIZONTAL BANDSAW

2012

TIMESAVER V2118 18" BELT SANDER WITH DUST COLLECTOR

NATIONAL 50" POWER SHEAR

WENZEL LH108 CNC COORDINATE MEASURING MACHINE

BROWN & SHARPE MICROVAL COORDINATE MEASURING MACHINE

GAGE MASTER 12" OPTICAL COMPARATOR

2007

107386_Vero.indd 7 6/29/17 9:59 AM

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 26TH FROM 8:00 A.M. - 4:00 P.M. EDT

8

SILKSCREEN & ASSEMBLY

Full Silkscreen Department with NUARC Mercury Exposure

TAMPO Paint Pad Printing System

HELICOIL Insertion Tools

FORKLIFT & AIR COMPRESSORS

TOYOTA Model 6FGCU25 4500lb Propane Forklift with Side Shift, 3 Stage Mast, Lights, 4 Hard Tires, 42" Forks, Lights, 189" Lift Capacity, sn:74811

KAESER SIGMA Model AS31 25HP Rotary Screw Air Compressor with Sigma Digital Controls

KAESER SIGMA Model SM11 10HP Rotary Screw Air Compressor & TC31 Air DryerTOYOTA 4.500LB PROPANE FORKLIFT

KAESER SIGMA AS31 AIR COMPRESSOR

TAMPO PAINT PAD PRINTING SYSTEM

HELICOIL INSERTION TOOLS & ASSEMBLY

TAMPO PAINT PAD PRINTING SYSTEM

SILKSCREEN & ASSEMBLY

Download a lot book at www.asset-sales.com

107386_Vero.indd 8 6/29/17 9:59 AM

AUCTION SALE DATE & TIME – THURSDAY, JULY 27TH @ 10:00 A.M. EDT

9

MISCELLANEOUSR-O Tool & Cutter Grinder ● NORTON Hyd Automatic Surface Grinder with 18” x 6” Magnetic Chuck ● MILLER Model Dynasty 350 Tig Welder with Programmable Pulse, sn:LH130772L, mfg.2006 ● 30 Ton Hydraulic Press ● 10 Ton FAMCO Punch Press ● Huge Assortment of BT 40 & CAT 40 Tooling ● Collets ● Surface Plates ● Set-Up Tooling ● KURT Vises ● Tombstones ● Double Acting Vises ● Portable Toolboxes ● Aluminum Stock ● Carbide Tooling ● Taps ● Reamers ● End Mills ● Index Boxes ● VIDMAR Cabinets ● Drills ● Grinders ● Etc.

107386_Vero.indd 9 6/29/17 9:59 AM

Turn

ing Y

our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Florida License #AB2058 & AU2787

(2) KITAMURA MYCENTER 3X CNC VERITCAL MACHINING CENTERS

DIRECTIONSExit Airport to merge onto FL-528 for 30.3 miles. Take exit 42A to merge onto I-95 South toward Miami for 49.3 miles. Take exit 156 and left at light for Fellsmere Road. Fellsmere Rd turns in to Sebastian Blvd. Turn right onto 90th Ave for 1.2 miles. Continue onto 85th Street. Plant will be on the left. Follow auction signs.

HOTELSSPRINGHILL SUITES BY MARRIOTT 5115 Indian River Blvd. - Vero Beach, FL 32967 (772) 978-9292

HOLIDAY INN ORLANDO AIRPORT 5750 T.G. Lee Blvd. - Orlando, FL 32822 (407) 851-6400

UPCOMING AUCTIONSTHURSDAY, JULY 20th - Grapics & Mailing ServiceLate Model Digital Inkjet Printers, Feeders & Folding MachineryOnline OnlyMontgomery, AL

TUESDAY, JULY 25th - Eastview Mfg. Inc.CNC Precision Swiss Screw Machines & Centerless GrindersOnline OnlyElgin, IL

PUBLIC AUCTIONPLANT CLOSED

VERO MACHINE INDUSTRIESCNC AEROSPACE MANUFACTURER

VERO BEACH, FLTHURSDAY, JULY 27TH

@ 10:00 A.M. EDT

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.

Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.

REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.

ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

PresortedFirst Class Mail

U.S. PostagePAID

Kokomo, INPermit No. 154

2AVAIL.

107386_Vero.indd 10 6/29/17 9:59 AM