www.automationdirect.com/tools e33-1 Volume 14 In this interactive PDF you can: • Use bookmarks to navigate by product category • Use bookmarks to save, search, print or e-mail the catalog section •Click on part #s to link directly to our online store for current pricing, specs, stocking information and more Gripping and Stripping Hand Tools Metal Hole Cutting Tools Sockets and Wratchets Tools and Test Equipment Section 33 Screwdrivers Tachometers and Stroboscopes
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
w w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-1Volume 14
In this interactive PDFyou can:
•Use bookmarks tonavigate by productcategory
•Use bookmarks tosave, search, printor e-mail the catalogsection
•Click on part #sto link directly toour online store forcurrent pricing, specs,stocking informationand more
Gripping and Stripping Hand Tools
Metal Hole Cutting Tools
Sockets and Wratchets
Tools and Test EquipmentSection 33
Screwdrivers
Tachometers and Stroboscopes
Ratchets, Screwdrivers & Torque ToolsTop Wera quality at an AUTOMATIONDIRECT price!Wera is one of the world's leadingmanufacturers of screwdriving tools.
They are known for their attention to quality,ease of use, and a safety-friendly design.
They know you want to get the job donewithout having to fight your own tools for agood grip or tight hold.
Now AutomationDirect is selling Weratools in North America, bringing qualitytools, that are already used daily aroundthe world, to you at incredible prices.
Ratchets and Sockets:A combination of five easy-to-grip ratchettypes in one, plus use it as a screwdriver.
• Quick-release ratchet• Power ratchet• Screwdriver
Zyklop ratchets are really fast movers. Therotating mass design combined with therotationally symmetrical Kraftform handleand the spin sleeve accelerates the screw-driving process.
Zyklop sets are supplied in very appealingand functional cases. The tools are setinto a dual colour foam tool control traythat can be taken out and be used incabinet or workstation drawers.
The reversible ratchet with 72 fine-pitchedteeth has a small return angle of only 50.The short stroke helps you work quicklyand precisely.
Wera chiseldriver: For screwdriving, chiselling andloosening seized screws. With impact cap and “pound-thru” blade. Ergonomic, vibration free Kraftform handle.
Hex Keys: 13-Piece hex keyset with holder includes inch sizes
from 0.05 inch to 3/8inch. Nine-piece metrichex key set includessizes from 1.5mm to10mm, with holder.
Avoid rounding thehead of the socket:Hex-Plus tools provide a greatercontact surface to prevent thisand fit every standard hexagonsocket screw.
The ball lock holds the sockets andattachments securely for safe working.After pressing the release button attach-ments can be changed in all definedpositions.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-2Volume 14
1 - 8 0 0 - 6 3 3 - 0 4 0 5
Standard Screwdrivers:Handle markings include a screw symboland the size of the tip to easily find theright screwdriver. Lasertip laser treatmentcreates a microrough surface on the tip of the blade.
Bit Drivers and Screwdriver Bits:Bit drivers and bits are designed for demandingapplications, are extremely durable andare able to transfer high torque loads.
Torque Tools: Torque tools permit controlled tightening toprevent damage to screws and work pieces.
Limited Lifetime Warrantyon screwdrivers
Insulated Screwdrivers: Each insulated screwdriveris tested for safe operation up to 1,000 volts. Thesescrewdrivers transfer more torque with less effort,relieving physical stress even during intensive use.
The Kraftform handle has been designedto fit snugly in your hand and preventsblisters and calluses.
Laser treatment creates a microroughsurface on the tip of the blade. The driveend literally bites into the head of thescrew resulting in less slipping, fewerscratches and higher torque transfer.
Impact strength tested at minus40 centigrade for safetyeven under extremeconditions.
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-3Volume 14
Hole Cutting Toolsand Multi-Purpose Hole Saws
Bits, Taps and Punches• Step Drill Bits
• Jobber Length Drill Bits
• Machine Taps
• Hand Taps
• Hand Tap Wrenches
• Countersinks
• Drill Bit Sets
• Machine Thread Taps
• Metal Hole Punches(Electrical Knockout Punches)
Deburring tools and Kits
Multi-Purpose Hole Sawsand Accessories• High Speed Steel Saws
• High Speed SteelCobalt 8 Saws
• Accessories - Arbor holderassemblies and replacement pilotdrill bits
AutomationDirect's wide line of holecutting tools makes any job easier and lesscostly. These tools are designed for usewith steel, non-ferrous and light metals,stainless, plastic and cast iron.
These high-quality tools cut quickly andcleanly for a wide variety of applications,including electrical, sanitary engineering,heating technologies, automotive andmany more.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-4Volume 14
Combination PliersCombination pliers, or combi pliers, combine the basic func-tions of gripping and cutting in one tool. The cutting edges aresuitable for cutting wire, nails, and smaller cables. The serratedgripping jaws hold flat parts and small tools tightly. The burnerhole is suitable for gripping and turning items.
Gripping PliersThese pliers are designed for finer gripping and manipulating.Rubberized handles ensure a comfortable grip.
Water Pump PliersThese pliers are designed to provide an infinite variable adjust-ment of gripping capacity. They are suitable for gripping largeand small items, regardless of whether they are round, square,or hexagonal.
Wire Stripping Pliers & ToolsThese tools are suitable for stripping insulation from a variety of wires.Anti-slip ergonomic handles provide for user comfort and safety.
Cutting PliersKNIPEX cutting pliers are designed for exceptional cuttingcapacity and to provide better handling. These pliers areavailable for a variety of applications, including electronicsand for cutting plastics and bolts.
Shears, Crimpers & Circlip PliersWe offer shears for cutting copper and aluminum, tools forcrimping insulated and non-insulated terminals, as well as pliersfor fitting circlips into bores and shafts.
Gripping & StrippingHand ToolsThe world’s leading pliers brand, KNIPEX focuses on quality, performance, and setting the pace for product innovations.
We offer the following KNIPEX pliers:
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-5
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-6Volume 14
Stroboscopes and Tachometers
DT-315A Rechargeable StroboscopeThe DT-315A heavy duty, rechargeable battery powered stroboscope possessesthe same great features of the DT- 311A with the added convenience of totalportability via its own internal power supply. The quick recharge battery lasts upto two hours of full continuous usage at its high intensity flash rate. The DT-315A provides power flexibility by utilizing either its rechargeable internal batteryor AC line power when plugged into the included AC adapter/charger unit.
DT-725 Rechargeable StroboscopeThe DT-725 portable, lightweight stroboscope with rechargeable batterypossesses many of the same features as the DT-300 Series Stroboscopes,but is lighter in weight. Constructed of strengthened high-impact plastic,these rugged units are exceptionally reliable and withstand the sameharsh conditions as more expensive units.
DT-311A AC Powered StroboscopeThe DT-311A heavy duty, AC-powered stroboscope provides the illusionof "stopped motion" by adjusting the strobe's flash rate, causing theequipment to appear to be standing still or in slow motion. The DT-311Aalso measures rotational (RPM) or reciprocating (strokes per minute)speeds with the same precision as an electronic digital tachometer.
DT-326 Portable LED StroboscopeThe DT-326 is a portable stroboscope utilizing super bright LEDs in a robust,durable all-metal design. The DT- 326's unique LED array provides an accurate,stable strobe light. The innovative LED design allows for a longer flash life (5times longer than traditional xenon flashtubes). The DT-326 is designed forspeed (RPM) andfrequency (Hz) measurements in motion and vibration analysis.
* Requires additional cables and / or accessories not available from AutomationDirect.
• Highly polished and focused reflectoreliminates "blind" viewing areas
• External trigger for automaticsynchronization with equipment*
w w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-7
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Tools and Test Instruments
DT-100A Series Contact TachometersThe DT-100A Series Handheld Tachometers with microprocessor technology offersuperior accuracy and capabilities for measuring and recording rotational speed,linear speed and linear travel. DT-100A battery-operated tachometers featurerugged, high quality components.
PT-110 Non-Contact Laser TachometerThe Shimpo Model PT-110 Non-Contact Laser Tachometer is a simple-to-use,ergonomic, rugged test instrument that operates with optical laser technology. Thisvelocity analyzing and measuring device is ideal for rotational machine inspectionand process speed analysis.
DT-200LR Series Combination Laser TachometersThe DT-200LR Series Combination Contact/Non-Contact Laser HandheldTachometers enable precise non-contact RPM measurement up to 20 feet away.The Series DT-200LR digital tachometers incorporate laser technology and featurea field-upgradeable contact adapter for linear rate measure, conveniently allowingboth non-contact and contact measurements.
ST-1000 LED StroboscopeThe Shimpo ST-1000 is a Stroboscope-Tachometer with LED flash technology. Thisvelocity analyzing and measuring device is ideal for rotational machine inspection.
**Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us for anycalibration needs.
• Adjustable in either coarse or fine stepflash-rate tuning
• Backlit display shows current flash rate,10 user--stored pre-set flash rates, as wellas a low battery warning
• LED technology extends operation• Typical applications are to inspect rotors,
meshing gears, vibration diagnosticequipment
• Outstanding accuracy• Rugged die-cast aluminum housing• Wide field selection of measured units• Large 5-digit display• Expansive 10 measurement memory
capacity for quick retrieval of stored data
• Long battery life• Compact, easy grip design• CE compliant with free NIST
certificate.**
• Outstanding accuracy• Sophisticated laser beam detection to
20 feet provides operator safety duringtesting
• Rugged die-cast aluminum housing• Wide field selection of units• Large 5-digit display
• Expansive 10 measurement memorycapacity for quick retrieval of stored data
• Long battery life• Available display options of either LCD or
red LED• CE compliant with free N.I.S.T.
certificate.**
• Measures RPM, Hz or Total by simplyadjusting selector switch
• Lightweight, ergonomic design• Large, backlit LCD for easy viewing in
both bright and dim environments
• Automatically records Maximum,Minimum, Last Value as well as up to 96data points during testing
• Laser operation shows point ofmeasurement for easy aimingon equipment
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-8Volume 14
ToolsWera ScrewdriversWera is one of the world's leading manu-facturers of screwdriving tools.
We offer these Wera tools:
Standard Screwdrivers
Insulated Screwdrivers
Miniature Screwdrivers
Bit Drivers and Screwdriver Bits
Standard, Insulated, Miniature and Chiselscrewdrivers available in 6-piece sets with awall mount rack included.
Torque Tools
Hex Keys
WERA Limited LifetimeWarrantyIn addition to our standard 30 day moneyback returns policy, WERA offers a limitedlifetime warranty on all screwdrivers.Driver bits and hex keys have a lifetimewarranty against manufacturer’s defects.
Chisel Screwdrivers
Nutdrivers
Ratcheting CombinationWrenches Ratchet and Socket Sets
Ratchets
Sockets
Tools
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-9
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Safety PrecautionsInspect each tool BEFORE every use to ensure that it is in proper condition and not damaged.
Avoid risks for yourself and others by making sure your work environment is safe.
Always wear appropriate and approved eye protection.
Always use the right tool profiles for the corresponding screws (for example, Phillips #2 screwdriver for a Phillips #2 screw).
NEVER modify tools.
Only use tools for their intended function:• Never use screwdrivers as a lever.• Never use hand tools as power tool accessories.• Only use insulated tools and tools with appropriate IEC/VDE and GS symbols for working on live electrical applications.• If using VDE insulated tools, never exceed the maximum voltage ratings.• Do not expose the tools to extreme conditions such as extreme heat, which can alter the material properties of the tools and make them unsafe.
FeaturesHandle markingsHandle markings include a screw symbol and thesize of the tip to help you easily find the right screw-driver in your tool bag or at the workplace.
LasertipLaser treatment creates a microrough surface onthe tip of the blade. The drive end literally bitesinto the head of the screw. The advantages: lessslipping, fewer scratches, higher torque transferand less screwdriving effort. For slotted, Phillipsand Pozidriv screws.
Kraftform PlusThe shape that has been built by hand. The smoothhard zones allow the hand to easily glide duringhand re-positioning. The easy-to-grip soft anti-slipzones ensure full force transfer to the screw.
Hex-PlusExtends the service life of hexagon socket screws bypreventing internal wear. Hex-Plus provides more con-tact surface with the head of the screw, which reducesthe notching effect to a minimum and prevents therounding of the screw recess.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-10Volume 14
Standard ScrewdriversKraftform Plus screwdrivers transfer moretorque with less effort, relieving physicalstress even during intensive use.Combined with other practical and tech-nical product advantages, such as theLasertip for a secure fit in the screw, andgreater cam-out protection, Kraftformscrewdrivers are the perfect choice formanual work.
Standard Screwdrivers
Part Number Description Pcs/Pkg PriceEach
TW-SD-SET-1Wera screwdriver set, six-piece, includes four flat (slotted) (3, 4, 5.5 and 6.5mm) and two Phillips (#1 and #2) screwdrivers with laser etched non-slip tips(except 3mm flat). Wall mount rack included.
1 set <--->
TW-SD-SL-1 Wera flat (slotted) screwdriver, 0.5mm (0.02 inch) thick x 3mm (0.12 inch) widex 80mm (3.15 inch) long blade. 1 <--->
TW-SD-SL-2 Wera flat (slotted) screwdriver, 0.8mm (0.03 inch) thick x 4mm (0.16 inch) widex 100mm (3.94 inch) long blade with laser etched non-slip tip. 1 <--->
TW-SD-SL-3 Wera flat (slotted) screwdriver, 1mm (0.04 inch) thick x 5.5mm (0.22 inch) widex 125mm (4.92 inch) long blade with laser etched non-slip tip. 1 <--->
TW-SD-SL-4 Wera flat (slotted) screwdriver, 1.2mm (0.05 inch) thick x 6.5mm (0.26 inch)wide x 150mm (5.91 inch) long blade with laser etched non-slip tip. 1 <--->
TW-SD-PH-1 Wera Phillips screwdriver, #1 x 80mm (3.15 inch) long blade with laser etchednon-slip tip. 1 <--->
TW-SD-PH-2 Wera Phillips screwdriver, #2 x 100mm (3.94 inch) long blade with laser etchednon-slip tip. 1 <--->
TW-SD-PH-3 Wera Phillips screwdriver, #0 x 60mm (2.36 inch) long blade. 1 <--->
05008715055 Wera Phillips extra long screwdriver, #1 x 300mm (11.81 inch) long blade. 1 <--->
05008730055 Wera Phillips extra long screwdriver, #2 x 300mm (11.81 inch) long blade. 1 <--->
05008027055 Wera flat (slotted) extra long screwdriver, 0.8mm (0.03 inch) thick x 4mm (0.16inch) wide x 300mm (11.81 inch) long blade. 1 <--->
05008060055 Wera flat (slotted) extra long screwdriver, 1mm (0.04 inch) thick x 5.5mm (0.22inch) wide x 300mm (11.81 inch) long blade. 1 <--->
05138262055 Wera tamper-proof TORX screwdriver, TX 20 x 100mm (3.94 inch) long blade. 1 <--->
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Insulated ScrewdriversAs with all other Wera tools, safety is a toppriority for series 100 VDE screwdrivers.The quality of the blades exceeds currentstandards with respect to hardness andtorque strength. Each tool is tested fordielectric strength under a 10,000-voltload to guarantee safe operation up to1,000 volts.
Reduced diameter tip models have asmaller diameter blade at the tip to allowaccess to recessed screws such as thoseused in terminal blocks.
Insulated Screwdrivers
Part Number Description Pcs/Pkg PriceEach
TW-SD-SET-2Wera insulated screwdriver set, six-piece, 1000 volt insulation rating, includesfour flat (slotted) (2.5, 3, 4 and 5.5 mm) and two Phillips (#1 and #2) screw-drivers with laser etched non-slip tips (except 2.5 and 3 mm flat). Wall mountrack included.
1 set <--->
TW-SD-VDE-18Wera insulated screwdriver with interchangeable blades, 18-piece, 1000Vinsulation rating, includes handle, five flat (slotted) (2.5, 3, 3.5, 4 and 5.5mm), two Phillips (#1 and #2), two Phillips/slotted combo (#1 and #2), twoPozidriv/slotted (#1 and #2), two Robertson (square) (#1 and #2), four cabinetlatch insulated blades, and voltage tester. Durable cloth pouch included.
1 set <--->
TW-SD-VDE-7Wera insulated screwdriver with interchangeable blades, seven-piece, 1000Vinsulation rating, includes handle, four flat (slotted) (2.5, 3.5, 4 and 5.5 mm)and two Phillips (#1 and #2) insulated blades. Durable cloth pouch included.
1 set <--->
TW-SD-VSL-1 Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.4mm(0.016 inch) thick x 2.5mm (0.10 inch) wide x 80mm (3.15 inch) long blade. 1 <--->
TW-SD-VSL-2 Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.5mm (0.02inch) thick x 3mm (0.12 inch) wide x 100mm (3.94 inch) long blade. 1 <--->
TW-SD-VSL-3Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.8mm (0.03inch) thick x 4mm (0.16 inch) wide x 100mm (3.94 inch) long blade withlaser etched non-slip tip.
1 <--->
TW-SD-VSL-4Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 1mm (0.04inch) thick x 5.5mm (0.22 inch) wide x 125mm (4.92 inch) long blade withlaser etched non-slip tip.
1 <--->
TW-SD-VPH-1 Wera insulated Phillips screwdriver, 1000V insulation rating, #1 x 80mm(3.15 inch) long blade with laser etched non-slip tip. 1 <--->
TW-SD-VPH-2 Wera insulated Phillips screwdriver, 1000V insulation rating, #2 x 100mm(3.94 inch) long blade with laser etched non-slip tip. 1 <--->
05006450055 Wera insulated Phillips screwdriver with reduced diameter shank, 1000Vinsulation rating, #1 x 80mm (3.15 inch) long blade. 1 <--->
05006451055 Wera insulated Phillips screwdriver with reduced diameter shank, 1000Vinsulation rating, #2 x 100mm (3.94 inch) long blade. 1 <--->
05006440055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000Vinsulation rating, 0.6mm (0.02 inch) thick x 3.5mm (0.14 inch) wide x100mm (3.94 inch) long blade.
1 <--->
05006441055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000Vinsulation rating, 0.8mm (0.03 inch) thick x 4mm (0.16 inch) wide x 100mm(3.94 inch) long blade.
1 <--->
05006442055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000Vinsulation rating, 1mm (0.04 inch) thick x 5.5mm (0.22 inch) wide x 125mm(4.92 inch) long blade.
1 <--->
05350460055Wera insulated screwdriver set, six-piece, 1000 volt insulation rating, includesthree flat (slotted) (3.5mm to 5.5mm) and two Phillips (#1 and #2) screw-drivers with reduced diameter shanks, single-pole voltage tester. Wall mountrack included.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-12Volume 14
Miniature ScrewdriversThe hand support on the easy-turning capand the fast-turning zone below the capaccelerate the screw driving process. Thismakes time-consuming grip adjustments,which are required with conventionalprecision screwdrivers, unnecessary.
Miniature Screwdrivers
Part Number Description Pcs/Pkg PriceEach
TW-SD-SET-3Wera miniature screwdriver set, six piece, includes four flat (slotted) (1.8,2, 2.5 and 3 mm) and two Phillips (#00 and #0) screwdrivers with rotat-ing caps. Wall mount rack included.
1 set <--->
TW-SD-MSL-1 Wera miniature flat (slotted) screwdriver, 0.4mm (0.016 inch) thick x2mm (0.08 inch) wide x 60mm (2.36 inch) long blade. 1 <--->
TW-SD-MSL-2 Wera miniature flat (slotted) screwdriver, 0.4mm (0.016 inch) thick x2.5mm (0.10 inch) wide x 80mm (3.15 inch) long blade. 1 <--->
TW-SD-MSL-3 Wera miniature flat (slotted) screwdriver, 0.5mm (0.02 inch) thick x 3mm(0.12 inch) wide x 80mm (3.15 inch) long blade. 1 <--->
TW-SD-MPH-1 Wera miniature Phillips screwdriver, #0 x 60mm (2.36 inch) long blade. 1 <--->
TW-SD-MSL-1
TW-SD-MPH-1TW-SD-SET-3
Screwdrivers
Chisel ScrewdriversChisel screwdrivers are the tools for thejob when regular screwdrivers are notquite enough. The hexagonal blade goesthrough the handle to an impact cap withintegral 1/4 inch square socket. Thismodel is suitable for fastening, chiseling,and loosening seized screws.
Chiseldriver Screwdrivers
Part Number Description Pcs/Pkg PriceEach
05018283055Wera chisel screwdriver set, six-piece, includes four flat (slotted) (3.5 to7.0 mm) and two Phillips (#1 and #2) screwdrivers with extra tough hexshank. Wall mount rack included.
1 set <--->
05017040055 Wera Phillips chisel screwdriver, #1 x 90mm (3.54 inch) long blade. 1 <--->
05017041055 Wera Phillips chisel screwdriver, #2 x 113mm (4.45 inch) long blade. 1 <--->
05018300055 Wera flat (slotted) chisel screwdriver, 0.8mm (0.03 inch) thick x 4.5mm(0.18 inch) wide x 100mm (3.94 inch) long blade. 1 <--->
05018301055 Wera flat (slotted) chisel screwdriver, 1.0mm (0.04 inch) thick x 5.5mm(0.22 inch) wide x 103mm (4.06 inch) long blade. 1 <--->
05018302055 Wera flat (slotted) chisel screwdriver, 1.2mm (0.05 inch) thick x 7mm(0.28 inch) wide x 100mm (3.94 inch) long blade. 1 <--->
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-13
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Hex KeysHex-Plus L-keys for hexagon socket screwsprovide more contact surface inside thescrew, which prevents rounding.
L-keys can transfer high torque but theymust not twist to any great extent, or shearoff, to minimize the risk of injuries. Wera'sextensive experience with narrow toler-ance manufacturing techniques, carefulmaterial selection and refined hardeningtechnologies delivers maximum safety atwork.
Hex Keys
Part Number Description Pcs/Pkg PriceEach
TW-HK-SET-MM Wera hex key set, nine-piece, includes metric sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8and 10 mm. Holder included. 1 set <--->
TW-HK-SET-STD Wera hex key set, 13-piece, includes inch sizes 0.05, 1/16, 5/64, 3/32,7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Holder included. 1 set <--->
TW-HK-SET-MM TW-HK-SET-STD
Hand Tools
NutdriversWera nutdrivers have the same KraftformPlus handles as standard screwdrivers.Shafts are made of chrome-plated steeland are hollow to allow access to nuts onlong screws. Available in inch and metricsets.
Nutdrivers
Part Number Description Pcs/Pkg PriceEach
05345230055 Wera nutdriver set, seven-piece, includes 3/16, 1/4, 5/16, 11/32, 3/8,7/16 and 1/2 inch drivers with hollow shafts for clearing long threads. 1 set <--->
05029510055 Wera nutdriver set, seven-piece, includes 5.0, 5.5, 6.0, 7.0, 8.0, 10.0 and13.0mm drivers with hollow shafts for clearing long threads. 1 set <--->
05345230055 05029510055
Ratcheting CombinationWrenchesJoker combination ratchet wrenches revo-lutionize the humble wrench. The 12-pointopen end features a unique 6-point stopplate that enables easier turning of boltsand also provides improved grip for loos-ening stubborn screws. The fine toothratchet mechanism is exceptional forworking in tight spaces. Joker wrenchesfeature chrome molybdenum steelconstruction with a nickel-chrome coatingfor corrosion protection.
Ratcheting Combination Wrenches
Part Number Description Pcs/Pkg PriceEach
05073290055 Wera Joker ratcheting combination wrench set, four-piece, includes 10,13, 17 and 19mm wrenches. Durable cloth pouch included. 1 set <--->
05073270055 Wera Joker ratcheting combination wrench, with special nut holdingfeature and fine tooth ratchet, 10mm 1 <--->
05073273055 Wera Joker ratcheting combination wrench, with special nut holdingfeature and fine tooth ratchet, 13mm 1 <--->
05073277055 Wera Joker ratcheting combination wrench, with special nut holdingfeature and fine tooth ratchet, 17mm 1 <--->
05073279055 Wera Joker ratcheting combination wrench, with special nut holdingfeature and fine tooth ratchet, 19mm 1 <--->
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-14Volume 14
Torque ToolsWera torque tools permit torque-controlled tightening to prevent damageto screws or work pieces and to guaranteethe safety of screw connection. This makeslabor-intensive drilling, re-tapping andproduction downtimes a thing of the past.
All Wera torque tools are supplied with acalibration certificate.
Torque Tools
Part Number Description Pcs/Pkg PriceEach
TW-TD-2-11 Wera torque driver, 2.5 to 11.5 lb-in adjustable setpoint, 1/4 inch hexdrive. Driver bits not included. 1 <--->
TW-TD-11-29 Wera torque driver, 11 to 29 lb-in adjustable setpoint, 1/4 inch hex drive.Driver bits not included. 1 <--->
Bit Drivers andScrewdriver BitsWera bits have been designed fordemanding applications in trade andindustry. They are able to transfer hightorque loads, are safe to use andextremely durable.
Bit Drivers, Socket and Screwdriver Bits
Part Number Description Pcs/Pkg PriceEach
TW-DB-SET-SD1Wera screwdriver with bayonet attachment, includes three flat (slotted)(4.5, 5.5 and 6.5 mm) and three Phillips (#1, #2 and #3) bits stored inhandle. Durable cloth pouch included.
1 <--->
TW-DB-SET-28R
Wera driver bit set, 28-piece, includes mini bit ratchet, two adapters, oneflat (slotted) (5.5mm), six Phillips (2 x #1, 3 x #2 and #3), five Hex-Plus(3/32, 1/8, 5/32, 3/16 and 1/4 inch), six Torx (TX10, TX15, TX20, TX25,TX30 and TX40), five tamper-proof Torx (TX10, TX15, TX20, TX25 andTX30), and five Robertson (square) (#1, 3 x #2 and #3) driver bits.Carrying case included.
1 <--->
TW-DB-SET-6AWera driver bit set, six-piece, 1/4 inch hex drive adapter, includes two flat(slotted) (5.5 and 6.5 mm) and four Phillips (2 x #1 and 2 x #2) driverbits with diamond-coated non-slip tips. Carrying case included
1 <--->
TW-DB-ADT-MAG Wera driver bit adapter, 1/4 inch hex x 75mm (3 inch) long with ringmagnet. 1 <--->
TW-DB-PH-1 Wera driver bit, Phillips #1 x 70mm (2.75 inch) long, 1/4 inch hex drive,10 bits per pack. 10 <--->
TW-DB-PH-2 Wera driver bit, Phillips #2 x 70mm (2.75 inch) long, 1/4 inch hex drive,10 bits per pack. 10 <--->
TW-DB-SL-1 Wera driver bit, flat (slotted), 0.5mm (0.02 inch) thick x 3mm (0.12 inch)wide x 50mm (1.97 inch) long, 1/4 inch hex drive, 10 bits per pack. 10 <--->
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-15
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Bit Driver andSocket Sets
Bit Driver and Socket Sets
Part Number Description Pcs/Pkg PriceEach
05347180055 Wera imperial driver bit and socket set: inch, 38-piece 1 <--->
05073220055 Wera metric driver bit and socket set: metric, 38-piece 1 <--->
Wera driver bit and socket set, 38-piece,includes mini bit ratchet, two adapters, oneflat (slotted) (5.5mm), six Phillips (2 x #1,3 x #2, 1 x #3), five Hex-Plus (3/32, 1/8,5/32, 3/16 and 1/4 inch), six Torx (TX10,TX15, TX20, TX25, TX30 and TX40), fivetamper-proof Torx (TX10, TX15, TX20, TX25and TX30), five Robertson (square) (#1, 3 x#2 and #3) driver bits and seven 1/4 inchdrive sockets (3/16, 1/4, 5/16, 11/32, 3/8,7/16 and 1/2 inch). Carrying case included.The ratchet and sockets are made of chromevanadium steel with a brushed chrome-plated finish for corrosion protection.
Wera driver bit and socket set, 38-piece,includes mini bit ratchet, two adapters, oneflat (slotted) (5.5mm), six Phillips (2 x #1,3 x #2, 1 x #3), five Hex-Plus (3, 4, 5, 6 and8 mm), six Torx (TX10, TX15, TX20, TX25,TX30 and TX40), five tamper-proof Torx(TX10, TX15, TX20, TX25 and TX30), fivePozidriv (#1, 3 x #2 and #3) driver bits andseven 1/4 inch drive sockets (5.5, 6, 7, 8,10, 12 and 13 mm). Carrying case included.The ratchet and sockets are made of chromevanadium steel with a brushed chrome-plated finish for corrosion protection.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-16Volume 14
RatchetsZyklop ratchets have Kraftform Plushandles, a swivel head that locks in5 positions (0, +/-75, +/-90 degrees)and a fine tooth ratchet design that allowsoperation in tight spaces with travel as lowas 5 degrees. All three sizes of ratchetsinclude an easy-to-grip free-turning sleevefor faster work when using the ratchet as ascrewdriver. The Koloss 1/2 inch driveratchet is an extra heavy duty ratchet andhammer combination for tackling bigjobs. It comes with a removable extensionarm, rubber hammer face pad anddurable cloth holster. Ratchets are madeof chrome vanadium steel with a brushedchrome-plated finish for corrosion protec-tion.
Ratchets and Ratchet Sets
Part Number Description Pcs/Pkg PriceEach
05003500055 Wera Zyklop ratchet, 1/4 inch drive, with locking swivel head andergonomic grip handle. 1 <--->
05003550055 Wera Zyklop ratchet, 3/8 inch drive, with locking swivel head andergonomic grip handle. 1 <--->
05003600055 Wera Zyklop ratchet, 1/2 inch drive, with locking swivel head andergonomic grip handle. 1 <--->
05133862055Wera Koloss ratchet set, three-piece, 1/2 inch drive, includes Kolossratchet with hammer feature and ergonomic grip handle, handle exten-sion with release pin for increased torque and a synthetic rubber hammerface pad. Heavy-duty holster with belt loop included.
1 <--->
Ratchets and Sockets
05133862055
Socket SetsWera sockets are available in small sets ofsockets only or in larger sets that include aZyklop ratchet and other accessories.Sockets are made from high qualitychrome vanadium steel and have aknurled edge for manual turning. Inch andmetric sizes are available in 1/4, 3/8 and1/2 inch square drive. Sockets are madeof chrome vanadium steel with a brushedchrome-plated finish for corrosion protec-tion.
Socket Sets
Part Number Description Pcs/Pkg PriceEach
05300200055 Wera metric socket set, six-piece, 1/4 inch drive, includes 6, 8, 10, 12,13 and 14mm sockets. Storage rail included. 1 set <--->
05300201055 Wera imperial socket set, six-piece, 1/4 inch drive, includes 3/16, 1/4,5/16, 3/8, 7/16 and 1/2 inch sockets. Storage rail included. 1 set <--->
05300210055 Wera metric socket set, seven-piece, 3/8 inch drive, includes 10, 12, 13,14, 15, 16 and 17mm sockets. Storage rail included. 1 set <--->
05300211055 Wera imperial socket set, seven-piece, 3/8 inch drive, includes 3/8, 7/16,1/2, 9/16, 5/8, 11/16 and 3/4 inch sockets. Storage rail included. 1 set <--->
05300220055 Wera metric socket set, seven-piece, 1/2 inch drive, includes 12, 14, 15,16, 17, 19 and 21mm sockets. Storage rail included. 1 set <--->
05300221055 Wera imperial socket set, seven-piece, 1/2 inch drive, includes 1/2, 9/16,5/8, 11/16, 3/4, 7/8 and 1 inch sockets. Storage rail included. 1 set <--->
Wera Zyklop ratchet set, 15-piece, 1/4 inchdrive, includes Zyklop ratchet, 10 sockets(3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8,7/16, 1/2 and 9/16 inch), short and longextensions, sliding T-handle and universaljoint. Sturdy metal case included. Ratchetand sockets are made of chrome vanadiumsteel with a brushed chrome-plated finish forcorrosion protection.
Wera Zyklop ratchet set, 41-piece, 1/4 inchdrive, includes Zyklop ratchet, 10 sockets(3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8,7/16, 1/2 and 9/16 inch), short and longlockable extensions, wobble extension,sliding T-handle, universal joint, bit adapterand 24 bits. Sturdy metal case included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-plated finish for corrosion protection.
Wera Zyklop ratchet set, 18-piece, 1/4inch drive, includes Zyklop ratchet, 13sockets (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,12, 13 and 14 mm), short and long exten-sions, sliding T-handle and universal joint.Sturdy metal case included. Ratchet andsockets are made of chrome vanadiumsteel with a brushed chrome-plated finishfor corrosion protection.
Wera Zyklop ratchet set, 42-piece, 1/4 inchdrive, includes Zyklop ratchet, 13 sockets (4,4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and14 mm), short and long lockable extensions,wobble extension, sliding T-handle, universaljoint, bit adapter and 22 bits. Sturdy metalcase included. Ratchet and sockets are madeof chrome vanadium steel with a brushedchrome-plated finish for corrosion protection.
Wera Zyklop ratchet set, 26-piece, 1/4inch drive, includes Zyklop ratchet, sevensockets (5.5, 6, 7, 8, 10, 12 and 13 mm),long lockable extension, bit adapter and16 bits. Durable cloth pouch included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-plated finish for corrosion protection.
05051045055 Ratchet Set Contents
1/4 Zyklop ratchet
6-point socket 5.5, 6, 7, 8, 10, 12, 13
Lockableextension 1/4 x 150
Bit adaptor 1/4 x 37
Flat (slotted) bit -50mm long 1.0 x 5.5
Hex bit -50mm long 3, 4, 5, 6
Philips bit PH 1, PH 2, PH 3
Pozidriv bit PZ 1, PZ 2
Tamper-proofTorx® bit
TX 10, TX 15, TX 20,TX 25, TX 30, TX 40
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Wera Zyklop ratchet set, 17-piece, 3/8 inchdrive, includes Zyklop ratchet, 12 sockets(1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16,5/8, 11/16, 3/4, 13/16 and 7/8 inch), shortand long extensions, sliding T-handle anduniversal joint. Sturdy metal case included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-platedfinish for corrosion protection.
Wera Zyklop ratchet set, 38-piece, 3/8 inchdrive, includes Zyklop ratchet, 12 sockets (1/4,5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4, 13/16 and 7/8 inch), short andlong lockable extensions, wobble extension,sliding T-handle, universal joint, bit adapterand 19 bits. Sturdy metal case included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-platedfinish for corrosion protection.
Wera Zyklop ratchet set, 23-piece, 3/8 inchdrive, includes Zyklop ratchet, 18 sockets (6,7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,19, 20, 21, 22 and 24 mm), short and longextensions, sliding T-handle and universaljoint. Sturdy metal case included. Ratchetand sockets are made of chrome vanadiumsteel with a brushed chrome-plated finish forcorrosion protection.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Wera Zyklop ratchet set, 43-piece, 3/8 inch drive,includes Zyklop ratchet, 18 sockets (6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21,22 and 24 mm), short and long flexible lockextensions, wobble extension, sliding T-handle,universal joint, bit adapter and 18 bits. Sturdymetal case included. Ratchet and sockets aremade of chrome vanadium steel with a brushedchrome-plated finish for corrosion protection.
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-21
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more &other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
MotorControls
ProximitySensors
PhotoSensors
LimitSwitches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks &Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
1/2 inch Drive Imperial Ratchet Sets
Part Number Description Pcs/Pkg PriceEach
05003646055 Wera Zyklop imperial ratchet set, 1/2 inch drive, 23-piece 1 set <--->
05003647055 Wera Zyklop imperial premium ratchet set, 1/2 inch drive, 38-piece 1 set <--->
Ratchet and Socket Sets1/2 inch Drive ImperialRatchet Sets
Wera Zyklop ratchet set, 23-piece, 1/2 inchdrive, includes Zyklop ratchet, 18 sockets(3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16,3/4, 25/32, 13/16, 7/8, 15/16, 31/32, 1,1-1/16, 1-1/8, 1-3/16 and 1-1/4 inch), shortand long extensions, sliding T-handle anduniversal joint. Sturdy metal case included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-platedfinish for corrosion protection.
Wera Zyklop ratchet set, 38-piece, 1/2 inch drive,includes Zyklop ratchet, 18 sockets (3/8, 7/16,1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32,13/16, 7/8, 15/16, 31/32, 1, 1-1/16, 1-1/8,1-3/16 and 1-1/4 inch), short and long lockableextensions, wobble extension, sliding T-handle,universal joint, bit adapter and 13 bits. Sturdymetal case included. Ratchet and sockets aremade of chrome vanadium steel with a brushedchrome-plated finish for corrosion protection.
Wera Zyklop ratchet set, 22-piece, 1/2 inchdrive, includes Zyklop ratchet, 17 sockets(10, 11, 12, 13, 14, 15, 16, 17, 18, 19,20, 21, 22, 24, 27, 30 and 32 mm), shortand long extensions, sliding T-handle anduniversal joint. Sturdy metal case included.Ratchet and sockets are made of chromevanadium steel with a brushed chrome-plated finish for corrosion protection.
Wera Zyklop ratchet set, 37-piece, 1/2 inchdrive, includes Zyklop ratchet, 17 sockets (10,11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21,22, 24, 27, 30 and 32 mm), short and longlockable extensions, wobble extension, slidingT-handle, universal joint, bit adapter and 13bits. Sturdy metal case included. Ratchet andsockets are made of chrome vanadium steelwith a brushed chrome-plated finish for corro-sion protection.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.
Split Point Step DrillsThe spiral flutes of RUKO high-perfor-mance step drills are CBN-ground from thesolid hardened form. Because CBN(cubical boron nitride) is a much harderabrasive than even silicon carbide orcorundum, a better and sharper cuttingedge is achieved without burrs. Because ofthis higher dimensional precision, the drillswill last considerably longer while main-taining precise process tolerances. Drillbits are available in HHigh SSpeed SSteel,Cobalt 5 alloy High Speed Steel andTTiitanium NNitride-coated High Speed Steel.HSS-Co5 bits are the best choice for cutting stainless steels. The added titaniumnitride coating increases the surface hard-ness to approximately 2300 HV and theheat resistance to 1100°F (600°C).
• Point Cut: split point DIN 1412 C• Point angle: 118°• Step angle: 90°• Right-hand cutting
FeaturesWhat makes these step drills special?
• CBN-ground flutes without burrs mean asuperior cutting edge and longer tool life.
• Each step has a radially adjusted relief produced by CBN grinding, relating directly to the diameter of the step, so thecutting edge is always the highest point ofthe diameter.
• Each step is axially CBN relief-ground,meaning the cutting edge is also the highest point of the axial cutting axis.
• The cutting edge of each step has reliefangle, meaning the cutting edge is also thehighest point in advance direction.
• The CBN-ground point ensures centeringand spot-drilling, even in thin-walled material.
Jobber Length DrillsThese high performance twist drills are suitable for all normal drilling in conven-tional materials. Drill bits are available inHigh Speed Steel (HSS), High Speed Steelwith 5% Colbalt alloy (HSS-Co5) andTitanium Nitride-coated High Speed Steel(HSS-TiN).
• Point Cut: 1/8” dia. with split point DIN 1412 C
• Point angle: 118° HSS & HSS-TiN /135° HSS-Co5
• Helix angle: 20° to 30°• Right hand cutting
FeaturesThe HSS ground twist drill is made ofheavy-duty high-speed steel. The fullyground twist drill has a more preciseconcentricity. HSS-Co5 drills are ideallysuited for materials that are especially difficult to drill such as stainlesss steel andfor higher chip loading. HSS-TiN modelsadd a titanium nitride coating to increasethe surface hardness to approximately2300 HV and the heat resistance to1100°F (600°C). This also provides longertool life with increased cutting speeds.
Application Use HSS, HSS-Co5 and HSS-TiN coateddrills for:
• Steel and stainless steel• Alloyed and unalloyed cast iron
(up to strength of 13,000 psi)• Grey, malleable, ductile and die-cast iron• Sintered iron, nickel silver, graphite• Short chipping aluminum alloys• Brass and bronze
*118º
C B
A
214816 shown
Jobber length drill bit*Point angle for HSS-Co5 bits is 135°
TThhrreeee--ppiieeccee SStteepp DDrriillll BBiitt SSeett High Speed Steel, bright finish, spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4”Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4”Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”
101026USERO <--->
TThhrreeee--ppiieeccee SStteepp DDrriillll BBiitt SSeett HSS-Co5 spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4”Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4”Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”
101026USTRO <--->
TThhrreeee--ppiieeccee SStteepp DDrriillll BBiitt SSeett HSS-TiN coated spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4”Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4”Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”
214214RO <---> 1199--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Metric sizes 1.0 to 10.0 mm in increments of 0.5 mmHigh-speed steel, 118 degrees point
214215RO <---> 2255--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Metric sizes 1.0 to 13.0 mm in increments of 0.5 mmHigh-speed steel, 118 degrees point
215214RO <---> 1199--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Metric sizes 1.0 to 10.0 mm in increments of 0.5 mmHigh-speed steel Cobalt 5 alloy, 135 degrees point
215215RO <---> 2255--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Metric sizes 1.0 to 13.0 mm in increments of 0.5 mmHigh-speed steel Cobalt 5 alloy, 135 degrees point
214850RO <---> 2211--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 3/8” in increments of 1/64”High-speed steel, 118 degrees point
214851RO <---> 2299--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 1/2” in increments of 1/64”High-speed steel, 118 degrees point.
215850RO <---> 2211--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 3/8” in increments of 1/64”High-speed steel Cobalt 5 alloy, 135 degrees point
215851RO <---> 2299--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 1/2” in increments of 1/64”High-speed steel Cobalt 5 alloy, 135 degrees point.
250850TRO <---> 2211--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 3/8” in increments of 1/64”TiN-coated high-speed steel, 118 degrees point
250851TRO <---> 2299--ppiieeccee jjoobbbbeerr LLeennggtthh DDrriillll SSeett Fractional sizes 1/16” to 1/2” in increments of 1/64”TiN-coated high-speed steel, 118 degrees point
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-31
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Knockout PunchesRUKO’s knockout punch hole-cutting toolincludes punch, die and draw bolt (withoutball bearing). Use for sheet steel, stainless-steel sheets, non-ferrous and light metals,and plastics. Replacement bolts are offeredin three of the most popular sizes.
Features• Cuts holes in thin materials quickly,
easily, cleanly and without burrs. • 3-point cut ensures less deformation of the
punched parts, preventing damage to thedraw-in bolt.
• The optional ball bearing between draw-inbolt and die plate makes handling simplerand quicker, reducing the force requiredby approx. 67% (replacement bolt partnumbers, 103110K, 103112K, and 103116K).
• The metric draw-in bolts are of the highestquality and are designed for extremeloads. If lost, they can be replaced for shortperiods of time by standard metric finethreaded bolts.
Knockout Punches
Part # Pcs/Pkg Price Description Actual HoleSize (Ø A)
Draw BoltSize (Ø B)
Trade HoleSize Works With
109220 1 <--->
Knockout punchhole-cutting tool
22 mm M10 22 mm 101703, 103110K109225 1 <---> 22.5 mm M10 22.5 mm 101703, 103110K109300 1 <---> 30 mm M12 30 mm 101703, 103112K109305 1 <---> 30.5 mm M12 30.5 mm 101703, 103112K
MM88 xx 11..00 mmmm 14 Ga, 2 mm 7/16” 18 Ga, 1 mm 8 Ga, 4 mm 8 Ga, 4 mm
MM1100 xx 11..00 mmmm 14 Ga, 2 mm 9/16” 18 Ga, 1 mm 8 Ga, 4 mm 8 Ga, 4 mm
MM1122 xx 11..55 mmmm 11 Ga, 3 mm 19/32” 14 Ga, 2 mm 8 Ga, 4 mm 8 Ga, 4 mm
MM1166 xx 11..55 mmmm 11 Ga, 3 mm 3/4” 14 Ga, 2 mm 8 Ga, 4 mm 8 Ga, 4 mm
ØA
BØ
109220 shown
Note: Part number 109225 is recommended when punching holes for 22mm pilot devices.Part number 109305 is recommended when punching holes for 30mm pilot devices.
Ball bearing only availablewith replacement draw boltsP/N 103110K, 103112K and
106052 <---> not available – 52 2-1/16 – – A2 / A6
106054 <---> 126054 <---> 54 2-1/8 – – A2 / A6
106055 <---> not available – 55 2-11/64 – – A2 / A6
106057 <---> 126057 <---> 57 2-1/4 – – A2 / A6
106059 <---> not available – 59 2-5/16 – – A2 / A6
Bi-Metal Hole Saws •ApplicationsUse HHigh SSpeed SSteel saws with variedcutting teeth for easily cut materials, suchas unalloyed steel (up to 101,521 psistrength), non-ferrous and light metals,plastics, plasterboard and light buildingboards, fiberboard, plywood and wood.
Use HHigh SSpeed SSteel CCobalt 8 saws withfine cutting teeth for cutting metals such asalloyed and non-alloyed steels (up to145,037 psi strength), high chromiumalloyed steels, such as stainless steel, steelsresistant to rusts and acids, non-ferrousand light metals.
Features• Cutting edges of HSS or HSS Co 8• Alloyed steel 6135 jacket• Cutting depth up to 1-1/2” (38 mm)• High rotational precision• Sturdy construction• Hole saw and shank in two parts, so hole
saws of different diameters can beexchanged and fitted faster
• Positive chipping and cutting anglesensure more aggressive cutting
• Teeth welded onto steel jacket • HSS hole saws have 5 teeth per inch,
Co 8 hole saws have 6 teeth per inch• Good chip removal• Slots in the jacket side aid in removal of
cutouts• Exchangeable centering drill• Right-hand cutting• Arbors are sold separately
106105 <---> not available – 105 4-1/8 3-1/2 3-1/2 A2 / A6
106108 <---> 126108 <---> 108 4-1/4 – – A2 / A6
106111 <---> 126111 <---> 111 4-3/8 – – A2 / A6
106114 <---> 126114 <---> 114 4-1/2 4 4 A2 / A6
106121 <---> 126121 <---> 121 4-3/4 – – A2 / A6
106127 <---> 126127 <---> 127 5 – – A2 / A6
106133 <---> not available – 133 5-1/4 – – A2 / A6
106140 <---> 126140 <---> 140 5-1/2 – 5 A2 / A6
106152 <---> 126152 <---> 152 6 – – A2 / A6
106160 <---> 126160 <---> 160 6-5/16 – – A2 / A6
106168 <---> 126168 <---> 168 6-5/8 – – A2 / A6
106177 <---> not available – 177 6-31/32 – – A2 / A6
106200 <---> 126200 <---> 210 8-1/4 – – A2 / A6
Important Operating Notes• These saws are unsuitable for hammer drill operation• Only slight pressure required to start drilling• Drill with light, steady pressure• Avoid pendulum movements while drilling• Follow table of cutting speeds• Use cooling agents recommended for material• Arbors are sold separately
Note: For pushbuttons, use RUKO knockout puncheslisted in previous pages.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-36Volume 14
RUKO Hole Saws Recommended Cutting Speeds, continued
MaterialHigh carbon
structural steel up to 101,521 psi
Alloyed steel upto 145,037 psi
Cast iron over36,259 psi CuZn alloy
Aluminiumalloy up to11% Silicon
Thermo-plastics Duro-plastics Wood
Vc = m/min 30 20 10 35 30 20 15 40
Coolant Cutting spray Cutting spray Compressed air Compressed air Cutting spray Water Compressed air Compressed air
Ø inch Ø mm r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m.
3-5/8 92 104 69 35 121 104 69 52 138
3-3/4 95 101 67 34 117 101 67 50 134
3-7/8 98 97 65 32 114 97 65 49 130
4 102 94 62 31 109 94 62 47 125
4-1/8 105 91 61 30 106 91 61 45 121
4-1/4 108 88 59 29 103 88 59 44 118
4-3/8 111 86 57 29 100 86 57 43 115
4-1/2 114 84 56 28 98 84 56 42 112
4-3/4 121 79 53 26 92 79 53 39 105
5 127 75 50 25 88 75 50 38 100
5-1/4 133 72 48 24 84 72 48 36 96
5-1/2 140 68 45 23 80 68 45 34 91
6 152 63 42 21 73 63 42 31 84
6-5/16 160 60 40 20 70 60 40 30 80
6-5/8 168 57 38 19 66 57 38 28 76
6-31/32 177 54 36 18 63 54 36 27 72
8-1/4 210 45 30 15 53 45 30 23 61
Note: Vc equals the recommended maximum linear speed of hole saw for each material.
Tools – Hole Saws – RecommendedCutting Speeds, continued
Tools – Jig Saw Blades
Jig Saw Blades
Part # Pcs/Pkg Price Description Recommended Applications DimensionsLength x Height x Thickness
3218009 5 <---> Jig Saw Blade, HSS, Wavy 21-teeth per inch Metals up to 2mm (5/64”) and non-metals up to 8mm (5/16”) thick
77.0 mm x 7.1 mm x 1.0 mm(3.03” x 9/32” x 0.039”)3238009 20 <---> Jig Saw Blade, HSS, Wavy 21-teeth per inch
3218011 5 <---> Jig Saw Blade, HSS, Wavy 13-teeth per inch Ferrous metals up to 3mm (1/8”) thickaluminum 3mm (1/8”) to 9.5 mm (3/8”) thick
and hard plastics 3mm (1/8”) to 8mm (5/16”) thick77.0 mm x 7.9 mm x 1.0 mm(3.03” x 5/16” x 0.039”)3238011 20 <---> Jig Saw Blade, HSS, Wavy 13-teeth per inch
3218033 5 <---> Jig Saw Blade, Bi-Metal HSS, Wavy 21-teeth per inch Mild steel and aluminum 1.5 mm (1/16”)to 4mm (5/32”) thick
77.0 mm x 7.9 mm x 1.0 mm(3.03” x 5/16” x 0.039”)3238033 20 <---> Jig Saw Blade, Bi-Metal HSS, Wavy 21-teeth per inch
Note - Competitive blade specifications may vary.
3218009 shown
RUKO T-shank jig saw blades in 5 or 20 piece sets for a variety of applications.Fits power tools by Bosch®, Atlas Copco®, AEG®, Makita®, Metabo®, Black and Decker® and Hitachi®.
107020 1 <---> Deburring blade - C40Small HSS triangular scraper for precision work on surfaces
up to 5/32” wide.
107021 1 <---> Deburring blade - C42Large HSS triangular scraper forprecision work on surfaces
up to 5/16” wide.
107025 1 <---> Steel blade holder for E blades –
107026 1 <---> Deburring blade - E100
HSS blade with B 10 cutting edge,long shank only. For internal andexternal deburring work on long-chipping materials such as steel,
aluminum, plastics etc.
107027 1 <---> Deburring blade - E200HSS blade with B 20 cutting edge,long shank only. For short-chippingmaterials such as brass and cast iron.
Usable in both directions.
107028 1 <---> Deburring blade - E300HSS blade with B 30 cutting edge,long shank only. For simultaneousdeburring of internal and externalbores in materials up to 5/32” thick.
107029 1 <---> Deburring blade - E350 HSS blade suitable for deburring straight edges, keyways etc.
107031 1 <---> Steel blade holder for F countersinks –
107032 1 <---> Countersink F12 HSS countersink for deburring holesup to 1/2” Dia
107033 1 <---> Countersink F20 HSS countersink for deburring holesup to 3/4” Dia
107034 1 <---> Countersink F30 HSS countersink for deburring holesup to 1-3/16” Dia
107054 1 <---> Deburring tool with changeableE100 Blade
Internal and External deburring onlong-chipping materials such as steel,
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-39
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Pliers Family Overview
Combination PliersCombination pliers, or combi pliers,combine the basic functions of grippingand cutting in one tool. The cuttingedges are suitable for cutting wire, nails,and smaller cables. The serrated gripping jaws hold flat parts and smalltools tightly. The burner hole is suitablefor gripping and turning items.
Wire Stripping Pliers & ToolsThese tools are suitable for strippinginsulation from a variety of wires. Anti-slip ergonomic handles provide foruser comfort and safety.
KNIPEX PliersThe world’s leading pliers brand, KNIPEX focuses on quality, performance, and settingthe pace for product innovations. We offer the following KNIPEX pliers:
Gripping PliersThese pliers are designed for finer grip-ping and manipulating. Rubberizedhandles ensure a comfortable grip.
Cutting PliersKNIPEX cutting pliers are designed forexceptional cutting capacity and toprovide better handling. These pliers areavailable for a variety of applications,including electronics and for cutting plas-tics and bolts.
Water Pump PliersThese pliers are designed to provide aninfinite variable adjustment of grippingcapacity. They are suitable for grippinglarge and small items, regardless ofwhether they are round, square, orhexagonal.
Shears, Crimpers & Circlip PliersWe offer shears for cutting copper andaluminum, tools for crimping insulatedand non-insulated terminals, as well aspliers for fitting circlips into bores andshafts.
Safety PrecautionsInspect each tool BEFORE every use to ensure that it is in proper condition and not damaged.
Avoid risks for yourself and others by making sure your work environment is safe. Avoid working in dark or unlit areas.
Always wear appropriate and approved eye and hand protection.
NEVER modify or alter tools in any way.
Only use pliers for their intended purpose:
• Do not use pliers on nuts and bolts. Never use them in place of a wrench or screwdriver.
• Do not use pliers as a hammer.
• Ensure your pliers are appropriately sized for the job at hand.
• Protect pliers from rain, snow, and excessive heat. This will prevent problems such as rust and tool deformation.
• Oil pliers periodically; a drop of light machine oil at the hinge will lengthen tool life and ensure ease of operation.
• Always ensure that the jaws are clean and teeth are sharp before each use.
• Power off equipment before cutting wires/cables.
1 - 8 0 0 - 6 3 3 - 0 4 0 5Tools and Test Instrumentse33-40Volume 14
Pliers Product Features
Long cutting edges forgreater cutting versatility High-grade special tool steel
Ergonomic slip-resistant handles
Surface treated for optimumcorrosion resistance
Slim head design for greateraccessibility in tight spaces High leverage design for greater
cutting power
Thin head is perfect for working inconfined or hard to reach areas
Polished edges
Multi-component comfort grip handlesprovide a slip-resistant,
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-45
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
KNIPEX® Cable Shears and Cutters
9512200SBA
9511165SBA 9511200SBA
Cable Shears
Features• Designed for cutting copper wire, aluminum single- and multiple stranded cables
• Precision ground, hardened blades
• Not suitable for steel wire or hard drawn copperconductors
• Clean and smooth cut without crushing or deformation
• Adjustable screw joint, self-locking
• Special tool steel; oil-hardened and tempered
Cable Shears
Part Number DescriptionCutting Capacity
Length Weight Pcs/Pkg Price
Solid Stranded
9511165SBA Cable shears with plastic-coated handles 0.59 in[15 mm]
1/0 AWG[50 mm²]
6.50 in[165 mm]
7.58 oz[215 g] 1 <--->
9511200SBA Cable shears with twin cutting edge, non-slip plastic-coatedhandles
0.79 in[20 mm]
2/0 AWG[70 mm²]
7.87 in[200 mm]
9.98 oz[283 g] 1 <--->
9512200SBA Cable shears with twin cutting edge, multi-component comfortgrip handles
0.79 in[20 mm]
2/0 AWG[70 mm²]
7.87 in[200 mm]
11.43 oz[324 g] 1 <--->
9522165 Cable shears with multi-component comfort grip and openingspring
0.59 in[15 mm]
1/0 AWG[50 mm2]
6.50 in[165 mm]
8.96 oz[254 g] 1 <--->
9531250SBACable cutter with ratchet action, two-speed tooth gear drive,fixed sleeve with stand for placing tool when cutting, multi-component comfort grip
Initial cut: using the frontcutting edge to cut the insulating sheath on largercable diameters leaves anergonomic handle openingwidth.
Final cut: where greater forceis required (cutting conduc-tors), the conductor can beplaced into the cutting-edgeprofile at the joint again.Front for initial cut - back forfinal cut.
Large cutting capacity Ratchet principle and two-stage ratchet drive for easiercutting
Inch dimensions are rounded to the nearest hundredth.
002072V01 2-Piece mini pliers set in practical belt pouch. Includes (1) 6” Wrench Pliers (p/n 8603150SBA and (1) 5” (p/n 8701125SBA) mini Cobra® pliers 0.77 lb [349 g] 2 <--->
001101Twin universal control cabinet key. Two 4-way wheel wrenches connected in a space-saving way with magnets. Includes lock profiles: square (5-6, 7-8, 9-10, 11mm), triangular (7, 8-9, 10-11, 12mm), double-bit (3-5mm), half-moon (6mm), steppedsquare (6-9mm), reversing bit (slot 1x7mm, cross-recess PH2). Die-cast zinc material.
Features• Outstanding accuracy for the strictest applications• Rugged die-cast aluminum housing enables usage in the harshest
conditions• Wide field selection of units in both instantaneous rate as well as
totalized length satisfies a multitude of user requirements• Large 5-digit display aids user visibility• Expansive 10 measurement memory capacity allows quick retrieval of
stored data plus additional last, maximum & minimum values• Long battery life (25-40 hrs. continuous use)• Compact, ergonomic design allows easy grip• Rear threaded inserts (1/4-20 x 5/16 in.) provide additional mounting
options• Available display options of either LCD or vibrant, bright red LED• CE compliant. Includes free NIST certificate.*
DT-100A Series Contact TachometersThe DT-100A Series Handheld Tachometers with microprocessortechnology offer superior accuracy and capabilities for measuringand recording rotational speed, linear speed and linear travel. TheDT-100A battery-operated tachometers feature the rugged, highquality components that have made them the benchmark in theindustry. These user friendly, value-packed units offer memorystorage, quick adjustment units knob, length functions, retrieval oflast and maximum and minimum values. Each unit also comes standard with a free NIST certificate.* Units are available with anLCD or vibrant red LED display.
DT-107A Handheld tachometer, contact, 5-digit LED display <--->
DT-CONE
DT-FUNNEL
Included AccessoriesEach DT-100A Series Handheld Tachometer includes (2) 1/2-inch coneadapters, a 1/2-inch funnel adapter, a 6-inch circumference measuring wheel,a 3.5-inch extension shaft, two AA alkaline batteries and carrrying case.Additional and replacement accessories can be found on the following page.
DT-FPM-6
EXT-SHAFT
carrying case
DT-100A SeriesTachometer(DT-105A shown)
* NIST certificates are valid one year from the date the unit ships from Shimpo toAutomationDirect. In order to maintain stock levels for immediate availability, up tosix-months “shelf time” may have elapsed before a unit is received by the customer.
DT-105A
Calibration services are not available from AutomationDirect. Contact ShimpoInstruments at (800) 237-7079 or www.shimpoinst.com/contact-us for any calibrationneeds.
Volume 14
e33-52 Tools and Test Instruments 1 - 8 0 0 - 6 3 3 - 0 4 0 5
Features• Outstanding accuracy for the strictest applications• Sophisticated laser beam detection to 20 feet provides operator safety
during testing• Rugged die-cast aluminum housing enables usage in the harshest
conditions• Wide field selection of units in both instantaneous rate as well as
totalized length satisfies a multitude of user requirements• Large 5-digit display aids user visibility• Expansive 10 measurement memory capacity allows quick retrieval of
stored data plus additional last, maximum & minimum values• Long battery life (25-40 hrs. continuous use)• Compact, ergonomic design allows easy grip• Rear threaded inserts (1/4-20 x 5/16 in.) provide additional mounting
options• Available display options of either LCD or vibrant, bright red LED• CE compliant. Includes free N.I.S.T. certificate.*
DT-200LR Series Combination LaserTachometersThe DT-200LR Series Combination Contact/Non-Contact LaserHandheld Tachometers enable precise non-contact RPM measurement up to 20 feet away. The Series DT-200LR digitaltachometers incorporate laser technology yet retain ruggedconstruction and reliable quality components. These instrumentsfeature a field-upgradeable contact adapter for linear rate measure,conveniently allowing both non-contact and contact measurements.These user friendly, value-packed units feature memory storage,quick adjustment units knob, length functions, retrieval of last,maximum and minimum values. Each unit comes standard with afree NIST certificate*. Units are available with an LCD or vibrant redLED display.
Included AccessoriesEach DT-200LR Series Handheld Tachometer includes a contact adapter,(2) 1/2-inch cone adapters, a 1/2-inch funnel adapter, a 6-inch circumference measuring wheel, a 3.5-inch extension shaft, 1-inch x 7.75-inch reflective tape, (2) AA alkaline batteries and carrrying case.Additional and replacement accessories can be found on the followingpage.
DT-200LR SeriesTachometer
(DT-205LR shown)
DT-ADP-200LR
DT-TAPE
* NIST certificates are valid one year from the date the unit ships fromShimpo to AutomationDirect. In order to maintain stock levels for immedi-ate availability, up to six-month “shelf time” may have elapsed before aunit is received by the customer.
DT-FUNNEL
DT-FPM-6
EXT-SHAFTcarrying case
Calibration services are not available from AutomationDirect. ContactShimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-usfor any calibration needs.
DT-CONE
Volume 14
e33-54 Tools and Test Instruments 1 - 8 0 0 - 6 3 3 - 0 4 0 5
Features• Measures RPM, Hz or Total by simple adjusting selector switch• Lightweight, ergonomic design allows comfortable long term usage• Large, backlit LCD for easy viewing in both bright and dim environments• Automatically records Maximum, Minimum, Last Value as well as up to
96 data points during testing. Quickly review after testing by pushingthe MEM button.
• Laser operation shows point of measurement for easy aiming on equipment
PT-110 Non-Contact Laser TachometerThe Shimpo Model PT-110 Non-Contact Laser Tachometer is asimple-to-use, ergonomic, rugged test instrument that operates withoptical laser technology. This velocity analyzing and measuringdevice is ideal for rotational machine inspection and process speedanalysis. The PT-110 features a large backlit LCD screen thatprovides clear viewing in any environment. Users can obtain resultsin either Hertz or RPM, as well as Total counts with the simple selection switch. During testing, the unit automatically savesmaximum, minimum, last recorded values and up to 96 loggeddata readings. The compact, lightweight PT-110 Tachometer comesstandard with reflective tape, 3 AAA batteries and protective carryingcase.
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-57
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Handheld Stroboscopes
Features• Aluminum construction provides exceptional durability• Highly polished and focused reflector eliminates “blind” viewing areas• External trigger allows unit to be automatically synchronized with
equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• High accuracy ( ±0.01% of reading ) is ideal for QC inspection and
process control• Synchronous output enables strobe to drive other strobes*• Flash timer control conserves flash tube life• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep
integral mounting thread• Grounded power cord, 9-feet long
DT-311A AC Powered StroboscopeThe DT-311A heavy duty, AC-powered stroboscope provides theillusion of “stopped motion” by adjusting the strobe’s flash rate,causing the equipment to appear to be standing still or in slowmotion. The DT-311A also measures rotational (RPM) or reciprocating (strokes per minute) speeds with the same precision asan electronic digital tachometer. The DT-311A stroboscope is ideallysuited for printing inspection, motion analysis, preventive maintenance and speed measurement of repetitive motion. The DT-311A strobe provides timely data on vibrating parts, leaks, spraypatterns and a variety of industrial and scientific operations. The unitis extremely easy to maneuver and operate via its lightweight andcompact design and simplified user interface. Its rugged metalconstruction provides unequaled reliability in the harshest environments.
DT-311A
DT-311A AC Powered StroboscopePart Number Description Price
DT-311A Heavy-duty digital stroboscope, 120VAC input,5-digit LED display <--->
DT-311A SpecificationsFlashing Range 40.0 - 35,000 FPM (flashes per minute)
Output Signal Synchronous, 400 µsec Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance
Rate Multiplier / Divider Multiply by 2, Divide by 2
External Mode Accuracy ±0.01 % ±1 digit
Phase Shift 0 to 359° with 1° resolution
Delay Time 0 to 2,000 msec from 40 - 10,000 FPM
External Trigger Input Signal LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN),pulse width 50 µsec min.
Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V
Display 5 digit, 0.4 in. (10 mm) high, LED
Flashtube Power/Life Xenon, 10 W max. (100 million flashes)
Flash Duration 10 - 40 µsec
Sensor Power Supply 12 VDC (40 mA)
Power Requirement 115 VAC ±10% 60/50 Hz, 30 VA
Operating Temperature 32 - 104°F (0 - 40°C)
Weight 2.6 lbs (1.18 kg)
Dimensions 7.28 in. L x 4.72 in. W x 4.72 in. H(185 mm x 120 mm x 120 mm)
Agency Approvals CE
Construction Aluminum
AccessoriesDT-311A Series Accessories
Part Number Description Price
DT-CARRYING-CASE Carrying case for DT-311A or DT-315Astroboscopes <--->
FLASHTUBE311-2 Replacement flashtube for DT-311A orDT-315A stroboscopes <--->
DT-SG-300 Rubber strobe guard for DT-311A orDT-315A stroboscopes <--->
* Requires additional cables and / or accessories not available from AutomationDirect.Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us
Features• Internal, fast-charging rechargeable battery supply• Aluminum construction provides exceptional durability• Highly polished and focused reflector eliminates “blind” viewing areas• External trigger allows unit to be automatically synchronized with
equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• High accuracy ( ±0.01% of reading ) is ideal for QC inspection and
process control• Synchronous output enables strobe to drive other strobes.*• Flash timer control conserves flash tube life• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep
integral mounting thread
DT-315A Rechargeable StroboscopeThe DT-315A heavy duty, rechargeable battery powered stroboscope possesses the same great features of the DT-311A withthe added convenience of total portability via its own internal powersupply. The quick recharge battery lasts up to two hours of fullcontinuous usage at its high intensity flash rate. The DT-315Aprovides power flexibility by utilizing either its rechargeable internalbattery or AC line power when plugged into the included ACadapter/charger unit. These features make the DT-315A ideal forquality inspection and preventive maintenance of automated motionequipment.
DT-315A
DT-315A Rechargeable StroboscopePart Number Description Price
DT-315A Heavy-duty digital stroboscope, battery poweredwith 120VAC charger, 5-digit LED display <--->
DT-315A SpecificationsFlashing Range 40 - 35,000 FPM (flashes per minute)
Output Signal Synchronous, 400 µsec Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 K Ω impedence
Rate Multiplier / Divider Multiply by 2, Divide by 2
External Mode Accuracy ±0.01 % ±1 digit
Phase Shift 0 to 359° with 1° resolution
Delay Time 0 to 2,000 msec from 40 - 10,000 FPM
External Trigger Input Signal LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN),pulse width 50 µsec min.
Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V
Display 5 digit, 0.4 in. (10 mm) high, LED
Flashtube Power/Life Xenon, 10 W max. (100 million flashes)
Flash Duration 10 - 40 µsec
Sensor Power Supply 12 VDC (40 mA)
Battery Life 1 - 2 hours depending on flash rate
Power Requirement Rechargeable Battery or AC Line Power with included AC adapter
Operating Temperature 32 - 104°F (0 - 40°C)
Weight 4.4 lbs (2 kg)
Dimensions 9.84 in. L x 4.72 in. W x 4.72 in. H(250 mm x 120 mm x 120 mm)
Agency Approvals CE
Construction Aluminum
AccessoriesDT-315A Series Accessories
Part Number Description Price
DT-CARRYING-CASE Carrying case for DT-311A or DT-315Astroboscopes <--->
FLASHTUBE311-2 Replacement flashtube for DT-311A or DT-315A stroboscopes <--->
DT-SG-300 Rubber strobe guard for DT-311A or DT-315A stroboscopes <--->
BAT-DT315A-P Replacement internal battery for DT-315Astroboscope <--->
DT-315CHARGER Replacement AC adapter / charger for DT-315A stroboscope, 100-240 VAC <--->
* Requires additional cables and / or accessories not available from AutomationDirect.Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us
DT-CARRYING-CASE
FLASHTUBE311-2DT-SG-300
BAT-DT315A-P
DT-315CHARGERVolume 14
e33-58 Tools and Test Instruments 1 - 8 0 0 - 6 3 3 - 0 4 0 5
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-59
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Handheld Stroboscopes
Features• Wide flash range of 60 - 120,000 flashes per minute (1-2000Hz) can be adjusted
to meet almost any high-speed application• Ratio control (Flash Pulse Duration) adjustable flash pulse duration achieves
sharper images for critical inspection• Line or battery power operation: AC adapter for continuous use or (4 x AA
batteries) for maximum portability• Phase shift advance or retard flash timing for viewing gear teeth, cutting
surfaces, repeats or “drifting” images• Input/Output interface: Input sensor triggers or output synchronization controls*• CE compliant.• 2-year warranty - this model only
DT-326 Portable LED StroboscopeThe DT-326 is a portable stroboscope utilizing super bright LEDs in arobust, durable all-metal design. The DT-326’s unique LED arrayprovides an accurate, stable strobe light. The innovative LED designallows for a longer flash life (5 times longer than traditional xenon flashtubes). The DT-326 is designed for speed (RPM) and frequency (Hz)measurements in motion and vibration analysis. It is ideal for predictiveand preventive maintenance applications such as: motors, shafts, roto-gravure printing, extruders, blow molding, wire lettering and striping,engraving, pulse jets, water jets, fans, cams, gear teeth, belt inspections,audio/speakers, fuel injectors, vibration analysis and cutting blade timingand sharpness. With its intuitive “ONE HAND” controls, wide rangeadjustable flash rate, superior brightness, focus control, silent operationand AC/DC power flexibility, the DT-326 LED Stroboscope provides a superior value in a compact, ergonomic package.
DT-326
DT-326 Portable LED StroboscopePart Number Description Price
DT-326 LED portable stroboscope, with AC adapter,backlit LCD display with continuous update <--->
Display LCD with backlightMain display: 6 characters
Sub-display: Flash, Units, Battery, Settings
Power Supply 4 AA Alkaline Batteries. 80 minute operation in ECO mode, 20 minute in normal operationAC Adapter: AC 100V – 240V 50/60Hz 24 – 33VA (2.0A/DC5V)
Operating Temperature 32 - 95° F (0 - 30° C)
Dimensions 8.66 in. L x 2.76 in. W x 2.36 in. H(220 mm x 70 mm x 60 mm)
Weight 1.1 lbs (0.55 kg)Agency Approvals CEIncluded Accessories Carrying case, AC adapter and cable, Input/Output connector kit, (4) alkaline AA batteries, manual, warranty cardConstruction Aluminum
* Requires additional cables and / or accessories not available fromAutomationDirect. Contact Shimpo Instruments at (800) 237-7079 orwww.shimpoinst.com/contact-us
Features• Bright LED display aids viewing in poorly lit areas• Lightweight design• External trigger allows unit to be automatically synchronized with
equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• Easy adjust flash rate controller dial• Synchronous output enables strobe to drive other strobes*• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep
integral mounting thread• Internal, fast-charging rechargeable battery supply
DT-725 Rechargeable StroboscopeThe DT-725 portable, lightweight stroboscope with rechargeablebattery possesses many of the same features as the DT-300 SeriesStroboscopes, but are lighter in weight. Constructed of strengthenedhigh-impact plastic, these rugged units are exceptionally reliableand withstand the same harsh conditions as more expensive units.Employing its unique phase shifting feature, the DT-725 “freezes”rotating or reciprocating machinery for visual inspection of coveredgear teeth, shafts, oil/fuel/ink injector patterns, and print media; allwithout stopping production.
These features make the DT-725 ideal for quality inspection andpreventive maintenance of automated motion equipment. Units canbe ordered separately or as a convenient kit.
DT-725
DT-725 Rechargeable StroboscopePart Number Description Price
DT-725 Lightweight digital stroboscope, with rechargeable internal battery <--->
DT-725KIT Lightweight digital stroboscope kit, DT-725, fastcharger, case <--->
DT-725 SpecificationsFlashing Range 40.0 - 12,500 FPM (flashes per minute)
Dimensions 8.98 in. L x 4.33 in. W x 8.54 in. H(228 mm x 110 mm x 217 mm)
Agency Approvals CE
Construction ABS Plastic
*Note - Batteries are not field replaceable. For battery replacement contact ShimpoInstruments at (800) 237-7079.
AccessoriesDT-725 Accessories
Part Number Description Price
FLASHTUBE721 Replacement flashtube for DT-725stroboscope <--->
DT-12V120 Replacement AC adapter / charger for DT-725 stroboscope, 120 VAC <--->
* Requires additional cables and / or accessories not available from AutomationDirect.Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us
FLASHTUBE721
DT-12V120
Volume 14
e33-60 Tools and Test Instruments 1 - 8 0 0 - 6 3 3 - 0 4 0 5
Tools and Test Instrumentsw w w . a u t o m a t i o n d i r e c t . c o m / t o o l s e33-61
CompanyInformation
SystemsOverview
ProgrammableControllers
Field I/O
Software
C-more & other HMI
Drives
SoftStarters
Motors &Gearbox
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
TemperatureSensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Pneumatics
Safety
Appendix
ProductIndex
Part #Index
Volume 14
Handheld StroboscopesST-1000 LED StroboscopeThe Shimpo ST-1000 is a Stroboscope-Tachometer with LED flashtechnology. This velocity analyzing and measuring device is ideal forrotational machine inspection. The stroboscope is capable offlashing the light in a synchronous frequency to the operatingmachinery. This creates the illusion of viewing stopped or slowedimages so that machine parts and processes may be inspected fordefects. Plus, the rotational speed of the machinery and systemsmay be recorded for further performance analysis.
The ST-1000 is adjustable in either coarse or fine step flash-ratetuning. The backlit display shows the current flash rate, 10 user-stored pre-set flash rates, as well as a low battery warning. Thebacklit feature can be switched off to save battery life if desired. Theergonomic, handheld device is made of sturdy ABS plastic andcomes with batteries and protective carrying case. The LED tech-nology extends operation due to the low energy requirement of thelight diodes compared with xenon stroboscopes. Typical applicationsfor the ST-1000 are to inspect rotors, meshing gears, vibration diag-nostic equipment, textile equipment, printing production lines,power tools, speaker acoustical analysis, fan balancing and manymore.
ST-1000
ST-1000 LED StroboscopePart Number Description Price