AUCTION DATE: Tuesday, March 7, 2017 at 10:00am (EST) AUCTION LOCATION: 185 William Smith Dr., Whitby (Toronto), ONT L1N 0A3 INSPECTION: Monday, March 6, 2017, 8:00am to 3:00pm (EST) • (14) Plastic Injection Molders Including: Mitsubishi, Toshiba Electric and Van Dorn up to 1000-Ton Capacity, as New as 2004 • Auxiliary Equipment Including: (15) Mold Temperature Controllers, Chillers, Conair Dryers • (11) Yushin, ABB and Fanuc Robots • Thermoforming and Foaming Lines as New as 2005, Hydraulic Presses • Tool Room Grinders, Mills, Saws, Plasma Cutters, Welders • Air Compressors Up to 150 HP • CAT Generator Set • Huge Selection of New and Used Parts Such as 400 HP Motor, Allen Bradley Controls and Parts, Banner Light Curtains, Heater Bands & Much More FEATURED EQUIPMENT For More Information and Complete Photo Gallery go to: www.machinerynetworkauctions.com or 888-998-4440 180 Ton 11.5 Oz. Toshiba Elect. Injection Molder Yushin VNXII-250SL-11 Robot Kiefel Technologies KS96/200ST Thermoformer Conair and Thoreson McCosh Dryers 2004 2004 2004 1 of 2 Large Offering of Late-Model, Well-Maintained Injection Molders, Auxiliary Equipment, Robots, Vacuum Formers, Tool Room and Over $700,000 of New Spare Parts from a Major Interior Automotive Contract Manufacturer PUBLIC AUCTION – ONSITE & ONLINE AUCTION DATE 10:00 AM EST MARCH 7 PLANT CLOSURE
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AUCTION DATE:Tuesday, March 7, 2017 at 10:00am (EST) AUCTION LOCATION: 185 William Smith Dr., Whitby (Toronto), ONT L1N 0A3
INSPECTION: Monday, March 6, 2017, 8:00am to 3:00pm (EST)
• (14) Plastic Injection Molders Including: Mitsubishi,Toshiba Electric and Van Dorn up to 1000-Ton Capacity,as New as 2004
• Auxiliary Equipment Including: (15) Mold TemperatureControllers, Chillers, Conair Dryers
• (11) Yushin, ABB and Fanuc Robots• Thermoforming and Foaming Linesas New as 2005, Hydraulic Presses
• Tool Room Grinders, Mills, Saws,Plasma Cutters, Welders
• Air Compressors Up to 150 HP• CAT Generator Set• Huge Selection of New and Used Parts Such as400 HP Motor, Allen Bradley Controls and Parts,Banner Light Curtains, Heater Bands & Much More
FEATURED EQUIPMENT
For More Information and Complete Photo Gallery go to:www.machinerynetworkauctions.com or 888-998-4440
180 Ton 11.5 Oz. Toshiba Elect. Injection Molder Yushin VNXII-250SL-11 Robot Kiefel Technologies KS96/200ST Thermoformer Conair and Thoreson McCosh Dryers
2004 20042004
1 of 2
Large Offering of Late-Model, Well-Maintained InjectionMolders, Auxiliary Equipment, Robots, Vacuum Formers,
Tool Room and Over $700,000 of New Spare Partsfrom a Major Interior Automotive Contract Manufacturer
PUBLIC AUCTION – ONSITE & ONLINEAUCTION
DATE10:00 AM EST
MARCH
7
PLANT CLOSURE
PLEASE VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS
INJECTION MOLDERS • 1000 Ton 165 Oz. Van Dorn Mdl. 1000HRS165, Pathfinder 4500 Control, Mfg. New in 1996,480 Volt, S/N 0473
• 496 US Ton 52.2 Oz. Mitsubishi Mdl. 500MSJ-60, 480 Volt, Mfg. New in 2003,S/N MSG406361 & MSG406393, (2) Available
• 264 US Ton 16.3 Oz. Mitsubishi Mdl. 270MSJ-17, 480, Volt Mfg. New in 2002/2003,S/N’s VS24D057 & VS24D042, (2) Available
• 209 US Ton 16.3 Oz. Mitsubishi Mdl. 210MSJ-17, 480, Volt Mfg. New in 2004/2003,S/N’s VS19D026 & VS19D042, (2) Available
• 180 Ton 11.5 Oz. Toshiba Mdl. EC180N-6B Electric, Injectvisor V21 Control, 230 Volt,Mfg. New in 2004, S/N 418008
• 176 US Ton 9.3 Oz. Mitsubishi Mdl. 180MSJ-10, 480 Volt, Mfg. New in 2003,S/N VS16C060
• 144 US Ton 9.3 Oz. Mitsubishi Mdl. 150MSJ-10, 480 Volt, Mfg. New in 2003,S/N VS13C072
• 90 Ton 4.6 Oz. Toshiba Mdl. ISG90V10-2B, Injectvisor V10 Control, 480 Volt,Mfg. New in 1996, S/N 609310
• 85 Ton 4 Oz. Niigata Mdl. NE85UA4, 480 Volt, Mfg. New in 1997, S/N 50033F • 88 US Ton 4.8 Oz. Mitsubishi Mdl. 90MSJ-5, 480 Volt Mfg. New in 2003,S/N’s VS08B036 & VS08B037, (2) Available
ROBOTS• Yushin Mdl. VNXII-150SL-95, Mfg. New in 2004, (2) Available• Yushin Mdl. VNXII-250SL-11, S/N 31309302 & 31756702,Mfg. New in 2004, (2) Available
• Yushin Mdl. VNXII-600SL-16, S/N 31756802 & 31756803 &31755701,Mfg. New in 2004, (3) Available
• ABB Mdl. IRB2400M98A, S/N 2427226, 575 Volt, Mfg. New in 2004 • ABB Mdl. IRB2400M2000, S/N 2427226 & 24-27228, 575 Volt,Mfg. New in 2004, (2) Available
• Fanuc Mdl. R-30IA, 480 Volt, Mfg. New in 2007, KMT Robotrim Booth
AUXILIARY EQUIPMENT• Conair Dryer Mdl. W200, S/N 257996, 575 Volt, w/1200 Lb. Hopperon Cart, Mfg. New in 2012
• Thoreson McCosh Dryer Mdl. TD-400, S/N 204-619-07, 575 Volt,w/1920 Lb. Hopper S/N 24160, Mfg. New in 2004
• Thoreson McCosh Dryer Mdl. TD-240, S/N 204-450-07, 575 Volt,w/960 Lb. Hopper, Mfg. New in 2004
• Berg Chiller Mdl. WQ-100-2/1-3P, Water Cooled, 100 Hp Compressor,Mfg. New in 2004, S/N W01377D-AE1-0504
• Berg Tower and Tank Mdl. TT-677-1, (30 X 2(40), Mfg. New in 2004,S/N W01377C-EC1-0504
• Temptek Water Cooled Chiller Mdl. CF-10W, 575 Volt, Mfg. New in 2004 • Sterlco Mold Temperature Controllers Mdl’s M2B2012 & MB2010,3/4 Hp, 9kw, 575 Volt, Mfg. New 2006-2004, (11) Available
• Aquatherm Mold Temperature Controllers Mdl. RA093A05, 3hp, 9kw,575 Volt, Mfg. New in 2004, (4) Available
• Gammalux Hot Runner Controls Mdl. TTC-2100, 240 Volt
496 US Ton 52.2 Oz. Mitsubishi 500MSJ-60 Injection Molder 264 US Ton 16.3 Oz. Mitsubishi 270MSJ-17 Injection Molder
Yushin VNXII-250SL-11 Robot
Thoreson McCosh TD-400 Dryer Berg Chiller and Tank Aquatherm Mold Temp. Controllers
Sterlco Mold Temp. Controllers
ABB IRB2400M2000 Robot
1 of 2
2003
1 of 2
2003
1 of 2 2004
2004
2004
11 Available
4 Available
S AND PHOTOS. www.machinerynetworkauctions.com
TOOL ROOMTHERMOFORMING, FOAMING LINE & PRESSES
AIR COMPRESSORS• Ingersoll-Rand Mdl. SSR-EP150, 670 CFM Cap., 135 PSIG MaxPressure, 150 Hp, 575V/3/60, S/N F37940V01048 &F37941V01067, (2) Available
• Ingersoll-Rand Mdl. TS700 Refrigerated Air Dryers, (2) Available• Polestar Mdl. DRD265, 460V/3/60, Refrigerated Air Dryer• Gardner Denver Compressor Integra Mdl. EFD99B, 575V, 125PSIG, Max Pressure, Mfg. New in 2008
• Ingersoll-Rand F2550NG Compressed Air Filter
MISCELLANEOUS
• Kiefel Technologies Mdl. KS96/200ST Thermoformer, S/N 1132, 960mm x 2000mm, 575 Volt, Mfg. New in 2004• Frimo Vacuum Former, S/N FRU.001, w/Allen Bradley 1200p Control, 480 Volt, Mfg. New in 2000 • Krauss Maffei Foaming, Mixing & Metering Line, Including Frimo Mixing Heads, Krauss Maffei HydraulicsPumps, Rimstar Metering & Controls, Mfg. New in 2005
• Konal Mdl. 11976-01-05 75 Ton Hydraulic Presses, S/N’s 11708-1 & 11708-2 , w/Allen Bradley Panelview600 Controls, 575 Volt, Mfg. New in 2005, (2) Available
• Bruno Hydraulic Press, w/Allen Bradley Panelview 600 Controls
HUGE SELECTION OFNEW AND USED SPARE PARTS• New Husky 400 Hp Motor Mdl. EMOD WK315M/4, 575 Volt• New 250 Hp Motor Emod Type WK315S/4 – 360 AL, 250HP/189KW,1780 RPM, 575V Motor, S/N 6617754
• New 30 Hp Motor Weg Mdl. TE7BF0X0H, 22KW, 3530 RPM,575V Motor, S/N 10309686
• New Allen Bradley Panel View Controls Mdl’s 1000G,1250,600 & 550 and Lots of Used Controls and Modules
• New Banner Microscreen Light Curtains • New Heater Bands, Air Filters & Cables• Lista Cabinets Full of Tooling• Plastic Resin and Much More
New Husky 400 Hp Motor New Allen Bradley Panel View
Lista Cabinets Full of Tooling Miscellaneous Parts
Chevalier FSG-618M Surface Grinder Clausing Kondia Mill Type FV-1
• Chevalier Surface Grinder Mdl. FSG-618M, 575V, C/W Walter M.20Magnetic Chuck, Acu Rite, D/R/O, S/N A3894026
• Clausing Kondia Milling Machine Type FV-1, C/W, Acu-Rite, 0/2/0,S/N AC933
• T-Jaw Vert. Bandsaw Mdl. 700, 575V/60/3, C/W, Blade Welder,• National Man. Shear Mdl. NS216, 52’’, 16 Ga. Capacity• SPX Hydraulic Powered Torque Unit Mdl. B• General Horizontal Metal Cutting Band Saw Mdl. FHB5-250, 575V• Dukane Welder Mdl. 4035LN2E-L2, Dynamic Process Controller, • Dukane Welder Mdl. 4070 DPC2• Owamat 8 (Beko) Type KT0800000 Oil Water Separator• Miller Spectrum 701 Plasma Cutting System, 230/460/575V• Lincoln Square Wave Tig Welder, 175 Pro, 230V• Lincoln Portable Fume Extractor• Miller Welder Syncrowave 250, CC, AC/DC, Welding Power Source• Lincoln Welder Ideal Arc TIG-250, Variable Voltage, AC/DC ArcPower Source
Ingersoll-Rand Air Compressors CAT Mdl. 3456 Generator Set
Krauss Maffei Foaming, Mixing & Metering Line
Frimo Vacuum Former
Bruno Hydraulic Press
• CAT Generator Set Mdl. 3456, Diesel,S/N 7WG02159, 625 KVA, 500 KW, 600 Volt,Mfg. New in 2004
• Toyota Electric Battery ChangerMdl. 7HBW23, 4100 Lbs. Cap., 24V
• Yale Tug Puller Unit Mdl. MTR005LEN24T,24V, Electric, S/N A902N01559B
• Exide Depth 48V Mdl. D3E2-24-850Batter Changers, (12) Available
2005
2000
$700,000 inReplacement
PartsMust See!
496 US Ton 52.2 Oz. Mitsubishi 500MSJ-60 Injection Molder
AUCTION DATE:Tuesday, March 7 at 10:00am (EST)
AUCTION LOCATION:185 William Smith DriveWhitby (Toronto), ONT
15910 Ventura Blvd, Suite 1410Encino, CA 91436
ONLINE BIDDING AT:Call us at 888-998-4440 or go to:www.machinerynetworkauctions.com
Large Offering of Late-Model, Well-Maintained InjectionMolders, Auxiliary Equipment, Robots, Vacuum Formers,
Tool Room and Over $700,000 of New Spare Partsfrom a Major Interior Automotive Contract Manufacturer
PUBLIC AUCTION – ONSITE & ONLINEAUCTION
DATE10:00 AM EST
MARCH
7TERMS OF SALE:SALE IS BEING CONDUCTED IN U.S. FUNDS. A 16% Buyer’s Premium for Onsite Purchases Will Apply to All Sales.A 18% Buyer’s Premium for Online Purchases Will Apply to All Sales. A Valid I.D. is Required to Register; The Bidder isPersonally Liable for Payment, Buyer’s Premium and Taxes. 13% HST Tax Applicable Shall Be Paid to the Auctioneerat Time of Sale. Auctioneer Reserves the Right to Refuse Issuing a Bidder Card. Auctioneer Makes No Guarantees or Warranties,Expressed or Implied of Any Kind. No Removal of Items Until Payment in Full Has Been Received. All Items will be Sold “AsIs-Where Is”. Any Disputes as to Bidding Shall be Settled by Auctioneer - No Bidder May Retract his Bid. Other Terms MayApply. Any Additional Terms and Conditions Announced by the Auctioneer will Supersede those Stated Herein.
TERMS OF PAYMENT:Payment is Due in Full by Friday, March 3rd, 2017. All Payments Must be Made by in U.S. Dollars, By Cash, CertifiedCheque, Bank Draft, Wire Transfer Payable to Hilco Industrial Acquisitions Canada, ULC. Visa and MastercardAccepted up to $2,000.00 (Only). Goods will not be Released Until Payment in Full is Received and Banks WiresHave Cleared. HST #83400-5795.REMOVAL DATES/TIMES/DEADLINES:Removal Process will Start After the Sale is Finished and the Accounting has Been Completed – No Removal During the Sale. All Minor Items Must be Removed by Friday, March 17th and all Major Friday, March 24th, 2017(No Exceptions) at 5pm, After that Time Buyer will Incur a Cost of $500 Daily for Entry into the Facility. A Buyers Release Form Must be Completed and Supplied to Hilco Personnel if Someone other than the Registered Bidder isPicking up Auction Purchases. They can be Turned into Hilco Personnel On-Site or Faxed into the Corporate Office at (416) 251-1955. All Items Sold “As Is-Where Is”, without any Warranties Expressed or Implied. Catalog isIntended as a Guide Only. Not Responsible for Errors, Omissions or Deletions. BUYERS ARE TO INSPECT ALL LOTS PRIOR TO BIDDING. NO CLAIMS WILL BE ACCEPTED AFTER REMOVAL OF ITEMS FROM AUCTION SITE.
ALL SALES FINAL – NO EXCEPTIONS • Printed in USA. IL License #444.000215
Large Offering of Late-Model, Well-Maintained InjectionMolders, Auxiliary Equipment, Robots, Vacuum Formers,
Tool Room and Over $700,000 of New Spare Partsfrom a Major Interior Automotive Contract Manufacturer
PUBLIC AUCTION – ONSITE & ONLINEAUCTION
DATE10:00 AM EST
MARCH
7
PLANT CLOSURE
1 of 2
2003
1000 Ton 165 Oz. Van Dorn Injection Molder Krauss Maffei Foaming, Mixing & Metering Line
PLANT CLOSURE
Related Documents
