A Visionary New Tool for Dynamic Transient Testing PSCAD/Relay and associated test equipment represent the next generation of relay testing. PSCAD/Relay is a time-based power system simulator that generates test waveforms with the same real world fidelity as events recorded from the power system itself. PSCAD/Relay, can be utilized to test the protection system, using the same signals the system will see. The result is more accurate and more realistic protection testing. The test waveforms are generated in a powerful interactive simulator , taking less time and producing superior results compared to traditional methods.Personnel responsible for relay testing do not have to make assumptions about which waveform characteristics are important for proper relay operation. Real system events, such as current reversal on parallel lines, are easily produced. Faults can be applied at any point on the cycle. Different operating times for breakers, DC offsets, inrush, mutual coupling, resonance, harmonics, and saturation effects are all included. Batch mode simulation allows for a series of test waveforms to be developed quickly and efficiently . Advance and speed up your testing process. Eliminate false operations before they occur.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8/4/2019 Psc Ad Relay
http://slidepdf.com/reader/full/psc-ad-relay 1/2
A Visionary New Tool forDynamic Transient Testing
PSCAD/Relay and associated test equipment
represent the next generation of relay testing.PSCAD/Relay is a time-based power systemsimulator that generates test waveforms with thesame real world fidelity as events recorded from thepower system itself. PSCAD/Relay, can be utilized totest the protection system, using the same signalsthe system will see. The result is more accurate andmore realistic protection testing.
The test waveforms are generated in a powerfulinteractive simulator, taking less time andproducing superior results compared to traditionalmethods.Personnel responsible for relay testing do
not have to make assumptions about whichwaveform characteristics are important for properrelay operation.
Real system events, such as current reversal onparallel lines, are easily produced. Faults can beapplied at any point on the cycle. Differentoperating times for breakers, DC offsets, inrush,mutual coupling, resonance, harmonics, andsaturation effects are all included. Batch modesimulation allows for a series of test waveforms tobe developed quickly and efficiently.
Advance and speed up your testing process.Eliminate false operations before they occur.
8/4/2019 Psc Ad Relay
http://slidepdf.com/reader/full/psc-ad-relay 2/2
Manitoba HVDC Research Centre Inc.244 Cree Crescent