Materials: 8.5×11 paper paper or heavy cardstock. You can also print on paper and clue to foam or cardboatd and cut out. Dowels if needed (these are to be held by the hands) Foam core Spray Mount Exacto Knife Tape Step One: Print out pictures of the props. Step Two: Using the spray mount adhere the paper to the foam core. Step Three: Using a sharp exacto knife cut out the shapes of the props. Step Four: Tape a wood dowel to the backside of the prop. Accent the Party www.accenttheparty.com copyright of:
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8/20/2019 Propstohold3.Compressed
http://slidepdf.com/reader/full/propstohold3compressed 1/5
Materials:
8.5×11 paper paper or heavy cardstock.
You can also print on paper and clue to
foam or cardboatd and cut out.
Dowels if needed (these are to be held
by the hands)
Foam core
Spray Mount
Exacto Knife
Tape
Step One: Print out pictures of the props.
Step Two: Using the spray mount adhere the paper to the foam
core.
Step Three: Using a sharp exacto knife cut out the shapes
of the props.
Step Four: Tape a wood dowel to the backside of the prop.
Accent the Party
www.accenttheparty.com
copyright of:
8/20/2019 Propstohold3.Compressed
http://slidepdf.com/reader/full/propstohold3compressed 2/5
Accent the Party
www.accenttheparty.com
8/20/2019 Propstohold3.Compressed
http://slidepdf.com/reader/full/propstohold3compressed 3/5
Accent the Party
www.accenttheparty.com
8/20/2019 Propstohold3.Compressed
http://slidepdf.com/reader/full/propstohold3compressed 4/5
Accent the Party
www.accenttheparty.com
8/20/2019 Propstohold3.Compressed
http://slidepdf.com/reader/full/propstohold3compressed 5/5
Accent the Party
www.accenttheparty.com
Related Documents
