We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel :+886-3-461-8618 Fax :+886-3-461-8677 www.prolightopto.com ProLight PK2N-3DxE-BVxx 3W Power LED Technical Datasheet Version: 1.2 Features ‧Viewing angle: 55° ‧Best thermal material solution of the world ‧Best Moisture Sensitivity:JEDEC Level 1 ‧RoHS compliant Main Applications ‧Entertainment Lighting ‧Commercial Lighting ‧Indoor Lighting ‧Outdoor Lighting Introduction ‧ProLight Phenix 3535-viewing angle 55°, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities. ProLight Phenix 3535-viewing angle 55° is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world. ‧Phenix 3535-viewing angle 55°qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation. 2014/04 DS-0012
18
Embed
ProLight PK2N-3DxE-BVxx 3W Power LED Version: 1 · ProLight PK2N-3DxE-BVxx 3W Power LED Technical Datasheet Version: 1.2 Features ... (BBL) 2700 K 2850 K Neutral White 3500 K 3050
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
ProLight PK2N-3DxE-BVxx 3W Power LED Technical Datasheet Version: 1.2
Features ‧Viewing angle: 55° ‧Best thermal material solution of the world ‧Best Moisture Sensitivity:JEDEC Level 1 ‧RoHS compliant
Main Applications ‧Entertainment Lighting ‧Commercial Lighting ‧Indoor Lighting ‧Outdoor Lighting
Introduction ‧ProLight Phenix 3535-viewing angle 55°, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities. ProLight Phenix 3535-viewing angle 55° is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world. ‧Phenix 3535-viewing angle 55°qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation.
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Color Part Number
Emitter
Lumious Flux ΦV (lm) CRI
Minimum @350mA Refer @700mA
Minimum Typical Minimum Typical
White PK2N-3DWE-BVSD 90 108 150 184 70
Neutral White PK2N-3DNE-BVR7 90 103 150 176 70
Warm White PK2N-3DVE-BVR8 70 86 117 147 80
● ProLight maintains a tolerance of ± 10% on flux and power measurements. ● ProLight maintains a tolerance of ± 2 on CRI measurements. ● Please do not drive at rated current more than 1 second without proper heat sink.
3
Flux Characteristics, TJ = 25°C
Optical Characteristics at 350mA, TJ = 25°C Total
included Viewing
Angle Angle
Radiation Color
Color Temperature CCT (degrees) (degrees)
Pattern Min. Typ. Max. θ0.90V 2 θ1/2
Lambertian
White 5000 K 7500 K 10000 K 160 55
Neutral White 3500 K 4250 K 5000 K 160 55
Warm White 2700 K 3100 K 3500 K 160 55
● ProLight maintains a tolerance of ± 5% for CCT measurements.
Forward Voltage VF (V) Forward Voltage VF (V) Thermal Resistance
@ 350mA Refer @700mA Junction to Slug
Color Min. Typ. Max. Typ. (°C/ W)
White 2.85 3.2 3.6 3.45 8
Neutral White 2.85 3.2 3.6 3.45 8
Warm White 2.85 3.2 3.6 3.45 8
● ProLight maintains a tolerance of ± 0.1V for Voltage measurements.
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Parameter White/Neutral White/Warm White
DC Forward Current (mA) 700
Peak Pulsed Forward Current (mA) 1000 (less than 1/10 duty cycle@1KHz)
Average Forward Current (mA) 700
ESD Sensitivity ±4000V (Class III)
(HBM per MIL-STD-883E Method 3015.7)
LED Junction Temperature 120°C
Operating Board Temperature -40°C - 90°C
at Maximum DC Forward Current
Storage Temperature -40°C - 120°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 3
Reverse Voltage Not designed to be driven in reverse bias
4
Absolute Maximum Ratings
Photometric Luminous Flux Bin Structure at 350mA Color Bin Code
Minimum Maximum Available
Photometric Flux (lm) Photometric Flux (lm) Color Bins
White
U1 90 100 All
U2 100 110 All
V1 110 120 Xx,Wx【1】
V2 120 130 【1】
Neutral White
U1 90 100 All
U2 100 110 All
V1 110 120 【1】
Warm White
T1 70 80 All
T2 80 90 All
U1 90 100 【1】
● ProLight maintains a tolerance of ± 10% on flux and power measurements. ● The flux bin of the product may be modified for improvement without notice. ●
【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility.
Average Ramp-Up Rate 3°C / second max. 3°C / second max.
(TSmax to TP) Preheat – Temperature Min (TSmin) 100°C 150°C – Temperature Max (TSmax) 150°C 200°C – Time (tSmin to tSmax) 60-120 seconds 60-180 seconds Time maintained above: – Temperature (TL) 183°C 217°C – Time (tL) 60-150 seconds 60-150 seconds Peak/Classification Temperature (TP) 240°C 260°C Time Within 5°C of Actual Peak
10-30 seconds 20-40 seconds Temperature (tP) Ramp-Down Rate 6°C/second max. 6°C/second max. Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
● We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.
● Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kind of solder pastes may cause a reliability problem to LED. ● All temperatures refer to topside of the package, measured on the package body surface. ● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. ● Reflow soldering should not be done more than three times. ● When soldering, do not put stress on the LEDs during heating. ● After soldering, do not warp the circuit board.