We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel : +886 - 3 - 461 - 8618 Fax : +886 - 3 - 461 - 8677 www.prolightopto.com ProLight PK2B-3LLE-PNV 3W UV Power LED Technical Datasheet Version: 1.1 Features ‧100% foot print compatible with Cree XP-C / XP-E / XP-G ‧Best thermal material solution of the world ‧Best Moisture Sensitivity:JEDEC Level 1 ‧RoHS compliant 2018/10 DS - 0879 Main Applications ‧UV gluing, UV curing, UV marking ‧UV drying of printing inks and lacquers ‧Currency inspection ‧Forensic analysis - urine, protein stains ‧Leak detection using fluorescent dyes ‧Detects fluorescing minerals and gems ‧Indoor Lighting ‧Outdoor Lighting Introduction ‧ProLight Phenix 3535, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities. ProLight Phenix 3535 is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world. ‧Phenix 3535 qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation.
15
Embed
ProLight PK2B-3LLE-PNV 3W UV Power LED Version: 1 · UV PK2B-3LLE-PNV 830 1050 800 1460 ProLight maintains a tolerance of ±7% on flux and power measurements. Please do not drive
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
ProLight PK2B-3LLE-PNV3W UV Power LEDTechnical DatasheetVersion: 1.1
Features‧100% foot print compatible with Cree
XP-C / XP-E / XP-G‧Best thermal material solution of the world‧Best Moisture Sensitivity:JEDEC Level 1‧RoHS compliant
2018/10DS-0879
Main Applications ‧UV gluing, UV curing, UV marking‧UV drying of printing inks and lacquers‧Currency inspection‧Forensic analysis - urine, protein stains‧Leak detection using fluorescent dyes‧Detects fluorescing minerals and gems‧Indoor Lighting ‧Outdoor Lighting
Introduction‧ProLight Phenix 3535, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities.ProLight Phenix 3535 is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world.‧Phenix 3535 qualifies as the JEDEC Level 1 MSL sensitivity level and suitable forSMD process, Pb_free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation.
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
3
Flux Characteristics, TJ = 25°C
ColorPart Number
Emitter
Radiometric Power (mW)
@500mA Refer @350mA Refer @700mA
Minimum Typical Typical Typical
UV PK2B-3LLE-PNV 830 1050 800 1460
● ProLight maintains a tolerance of ± 7% on flux and power measurements.● Please do not drive at rated current more than 1 second without proper heat sink.
Thermal
Forward Voltage VF (V) Resistance
@500mA Refer @350mA Refer @700mA Junction to
Color Min. Typ. Max. Typ. Typ. Slug (°C/ W)
UV 3.00 3.40 3.80 3.33 3.47 8
● ProLight maintains a tolerance of ± 0.1V for Voltage measurements.
Electrical Characteristics, TJ = 25°C
Optical Characteristics at 500mA, TJ = 25°C Total
included Viewing
Angle Angle
ColorPeak Wavelength λP (degrees) (degrees)
Min. Typ. Max. θ0.90V 2 θ1/2
UV 385 nm 393 nm 400 nm 160 130
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
Average Ramp-Up Rate3°C / second max. 3°C / second max.
(TSmax to TP)Preheat– Temperature Min (TSmin) 100°C 150°C– Temperature Max (TSmax) 150°C 200°C– Time (tSmin to tSmax) 60-120 seconds 60-180 seconds
Time maintained above:– Temperature (TL) 183°C 217°C– Time (tL) 60-150 seconds 60-150 seconds
Peak/Classification Temperature (TP) 240°C 260°CTime Within 5°C of Actual Peak
10-30 seconds 20-40 secondsTemperature (tP)Ramp-Down Rate 6°C/second max. 6°C/second max.Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
● We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.
● Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kindof solder pastes may cause a reliability problem to LED.
● All temperatures refer to topside of the package, measured on the package body surface.● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used. It should be confirmed beforehand whether thecharacteristics of the LEDs will or will not be damaged by repairing.
● Reflow soldering should not be done more than three times.● When soldering, do not put stress on the LEDs during heating.● After soldering, do not warp the circuit board.