PROFILES TILE ADHESIVES GROUTING MATERIAL WATERPROOFING RAISED FLOORS
PROFILES TILE ADHESIVES GROUTING MATERIAL WATERPROOFING RAISED FLOORS
This catalogue is protected under the Spanish Intellectual Property Act (Royal Decree 1/1996).Any reproduction of its contents, In whole or in part, without the express consent of PORCELANOSA Grupo
will be subject to punitive action under the Spanish Criminal Code.
Decorative and technical pro�lesTile installation adhesivesGrouting material and elastic joint sealantsSubstrate preparation productsWaterproo�ngRaised �oors
Index6
56648498
108
Pro�lesDecorative pro�lesElegance collectionGold collectionMetal collectionChrome collectionWood collectionpro-telo collection
Corner pro�les and trims for wall tilespro-mate 2pro-mate 3pro-mate 5pro-part Lipro-partpro-mate 45pro-cornerXLIGHT pro�les
Technical pro�lespro-Tpro-levelpro-dilataExpansion jointspro-steppro-�expro-sanitpro-plintpro-skirting
122426283031
3435363738404243
464748495051525354
Graphic index
Decorative pro�les
Corner pro�les and trims for wall tiles
Elegance collection
Wood collection
pro-mate 2
pro-part Li
pro-mate 5
Gold collection
pro-telo collection
pro-mate 3
pro-mate 45pro-part
Chrome collection
pro-corner
Page 12
Page 30
Page 34
Page 37
Page 36
Page 24
Page 31
Page 35
Page 40Page 38
Page 28
Page 42
Technical pro�les
Structural joints pro-�ex
pro-T
pro-step
pro-sanit
pro-level
pro-plint pro-skirting
pro-dilata
Page 49 Page 51
Page 46
Page 50
Page 52
Page 47
Page 53 Page 54
Page 48Metal collectionPage 26
Decorative profiles
12 13
pro-part Li Chrome SW 1500
pro-part Li Chromed brass SW 1500 11 mm 7/16”11x11x2500 mm
pro-part Li latón cromado SW 1500
B71342597 100120372
Chromed brass pro�le. Made with Swarovski Elements
pro-part Li Gold SW 1500
pro-part Li Gold SW 1500 11 mm 7/16”11x11x2500 mm
B73141324 100130432
Chromed brass pro�le with a 24k gold bath. Made with Swarovski elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski Elements.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
14 15
pro-part Li Crystal rock SW Silver
pro-part Li Crystal rock SW Silver 11 mm 7/16”11x11x2500 mm
B73141325 100130429
Chromed brass pro�le. Made with Swarovski Elements
pro-part Li Crystal rock SW Graphite
pro-part Li Crystal rock SW Graphite 11 mm 7/16”11x11x2500 mm
B73141326 100130428
Brass pro�le with dark metallic �nish. Made with Swarovski Elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
pro-part Li Crystal rock SW Silver
16 17
pro-part Li Crystal sand SW Gold
pro-part Li Crystal sand SW Gold 11 mm 7/16”11x11x2500 mm
B73141323 100130430
24 k gold plated brass. Made with Swarovski Elements
pro-part Li Crystal sand SW Silver
pro-part Li Crystal sand SW Silver 11 mm 7/16”11x11x2500 mm
B73141322 100130431
Chromed brass pro�le. Made with Swarovski Elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
pro-part Li Crystal sand SW Silver
18 19
pro-mate 5 Gold SW 500
pro-mate 5 Gold SW 500 11 mm 7/16”5x11x2500 mm
B71342585 100104649
24 k gold plated brass. Made with Swarovski elements
pro-mate 5 Gold SW 168
pro-mate 5 Gold SW 168 11 mm 7/16”5x11x2500 mm
B71342587 100109076
24 k gold plated brass. Made with Swarovski Elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
pro-mate 5 Gold SW 168
20 21
pro-mate 5 Chrome SW 500
pro-mate 5 Chromed brass SW 500 11 mm 7/16”5x11x2500 mm
B71342584 100104650
Chromed brass pro�le. Made with Swarovski Elements
pro-mate 5 Chrome SW 168
pro-mate 5 Chromed brass SW 168 11 mm 7/16”5x11x2500 mm
B71342586 100109077
Chromed brass pro�le. Made with Swarovski Elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
pro-mate 5 Chrome SW 500
22 23
pro-mate 5 chrome SW glass
pro-mate 5 Chromed brass SW glass 11 mm 7/16”5x11x2500 mm
B71342603 100120358
Chromed brass pro�le. Made with Swarovski elements
High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.
Elegance collection
pro-mate 5 Chrome SW glass
24Pro�le length: 2500 mm - 8 feet long
High-end decorative pro�le for wall tiles, 24K gold plated.
It substitutes the traditional ceramic frieze by a metallic line with an exclusive design.
Gold collection
Wall tileWall tile
pro-mate 5
KEA SAP h (mm) h (inches)B71342573 100100722 12.5 1/2B71342572 100100721 11 7/16
KEA SAP h (mm) h (inches)B71342575 100100725 12.5 1/2B71342577 100100724 11 7/16
KEA SAP h (mm) h (inches)B71342578 100100762 12.5 1/2B71342574 100100726 11 7/16
24K Gold
h
5 mm - 13/64”
pro-mate 5
pro-part pro-parth
8 mm - 5/16”
24K Gold
pro-part Li24K Gold
pro-part Li h
h
Please note exact measurements are in mm and imperial measurements are approximative
Decorative pro�les
26
ocean moon graphite
oxyde line
27
pro-mate 5
KEA SAP h (mm) h (inches)B71342595 100120370 11 7/16
KEA SAP h (mm) h (inches)B71342591 100120369 11 7/16
KEA SAP h (mm) h (inches)B71342598 100120359 11 7/16
KEA SAP h (mm) h (inches)B71342590 100120366 11 7/16
KEA SAP h (mm) h (inches)B71342599 100120364 11 7/16
KEA SAP h (mm) h (inches)B71342601 100120371 11 7/16
KEA SAP h (mm) h (inches)B71342593 100120367 mate 11 7/16
ocean
moon
graphite
graphite
oxyde
oxyde
line
h
5 mm
pro-mate 5
pro-part pro-parth
8 mm
Pro�le length: 2500 mm - 8 feet long
Metallic �nish decorative pro�les for ceramic wall tiles. It substitutes the traditional ceramic frieze. Available in five finishes, they represent an excellent complement for stone or metal-inspired wall tiles. Suitable for corner trims.
Metal collection
Wall tileWall tile
Please note exact measurements are in mm and imperial measurements are approximative
Decorative pro�les
28
Decorative pro�les
Pro�le length: 2500 mm - 8 feet long
Chromed brass decorative pro�le for wall tiles. It substitutes the traditional decorative ceramic frieze. Typical LIFESTYLE by PROCELANOSA pro�le.
Suitable for trimming corners and transitions between ceramic tiles.
Chrome collection
Floor and wall tileFloor and wall tile
pro-mate 3
Chromed brass
h
3 mm - 1/8”
pro-mate 3
pro-mate 5Chromed brass
h
5 mm - 13/64”
pro-mate 5
pro-telo mosaicChromed brass
pro-telo mosaic h
pro-partChromed brass
pro-parth
8 mm - 5/16”
Chromed brass corner
pro-part LiChromed brass
pro-part Li h
h
Chromed brass corner
25 - 63/64”
KEA SAP h (mm) h (inches)B71342608 100126772 XLIGHT 6 1/4B71133001 100004951 8 5/16B71133002 100004952 9 23/64B71133003 100004953 10 25/64B71133004 100004954 12.5 1/2
KEA SAP h (mm) h (inches)B71342611 100126779 XLIGHT 7 9/32B71132003 100004945 9 23/64B71132004 100004946 11 7/16B71134004 100004955 12.5 1/2
KEA SAP h (mm) h (inches)B73134001 100005368 XLIGHT 7 9/32B73134002 100005369 9 23/64B71342552 100088905 10 25/64B73134003 100005370 11 7/16B73141319 100097895 Porcelanosa 11 7/16B73134004 100005371 Shade 1 12.5 1/2B73141312 100033129 Shade 2 12.5 1/2B73134005 100005372 15 19/32
KEA SAP h (mm) h (inches)B73134301 100005373 XLIGHT 7 9/32B73134302 100005374 9 23/64B71342554 100091065 10 25/64B73134303 100005375 11 7/16B73134304 100005376 12.5 1/2B71342541 100067718 15 19/32
KEA SAP h (mm) h (inches)B72141343 100098464 11 7/16B71342550 100085153 12.5 1/2
KEA SAP h (mm) h (inches)B72141345 100099966 Mosaic 25 4 5/32B72141355 100104654 Mosaic Porcelanosa 4 5/32
KEA SAP h (mm) h (inches)B71342618 100126780 XLIGHT 4,5 3/16B71342542 100070170 11 7/16B71342543 100070171 12.5 1/2B71342545 100073492 15 19/32
pro-partcorner
pro-part Licorner
Please note exact measurements are in mm and imperial measurements are approximative
30 31
Decorative pro�les
Pro�le length: 2500 mm - 8 feet longpro-step W pro�les are supplied untreated so that the �nal user can choose the �nishing of the step.Do not use pro-telo W pro�les in coverings which come into direct contact with water.
Wood profiles for wall and floor tile coverings. Excellent solution for the design of ceramic settings with either contemporary or traditional style.
Available as a decorative line for ceramic wall tiles and as special pieces for steps.
pro-telo W
Wood collection
Floor and wall tileStep
pro-telo Wh
KEA SAP h (mm) h (inches)B72141306 100032362 Mahogany 15 12.5 1/2B72141309 100032360 Wenge 15 12.5 1/2B72141314 100032364 Walnut 15 12.5 1/2
pro-telo W 15 chromed brass
KEA SAP h (mm) h (inches)B72141305 100032363 Mahogany 25 12.5 1/2B72141312 100032361 Wenge 25 12.5 1/2B72141310 100032365 Walnut 25 12.5 1/2
pro-telo W 25 chromed brass
pro-telo carbono
KEA SAP h (mm) h (inches)B72141321 100089390 11 7/16
pro-telo 11x30 carbono
pro-telo Carbonoh
pro-step W
KEA SAP h (mm) h (inches)B76211001 100005498 Avignon 10 25/64
pro-step W
h
W Avignon
50 mm - 2”
pro-step W
KEA SAP h (mm) h (inches)B76211006 100005503 Milano 12.5 1/2B76211005 100005502 Monaco 12.5 1/2
pro-step W
W Monaco
h
50 mm - 2”30
.5 m
m · 1
1/4 ”
W Milano
h
50 mm - 2”
Decorative pro�les
Pro�le length: 2500 mm - 8 feet long pro-telo titanium pro�le length: 2400 mm - 7 feet long
Metal decorative pro�le for ceramic wall tiles. Flangeless metallic line for tiles of any thickness.
Available in a wide variety of materials, finishes and dimensions, they represent an excellent solution for the design of contemporary style ceramic settings.
pro-telo stainless steel 8x40
pro-telo collection
Wall tileFloor and wall tile
KEA SAP h (mm) h (inches)B72141110 100005299 Gloss 8 5/16B72141210 100005306 Brushed 8 5/16
Stainless Steel 8x40
pro-telo aluminum
KEA SAP h (mm) h (inches)B72122001 100005285 Gold 10 25/64B72122002 100005286 Silver 10 25/64
Aluminum 8x10 anodized
KEA SAP h (mm) h (inches)B72124001 100005288 Gold 10 25/64B72124002 100005289 Silver 10 25/64
Aluminum 8x10 gloss
pro-telo Aluminum h
pro-telo recto
KEA SAP h (mm) h (inches)B72141318 100084015 High gloss 8 5/16B72141348 100100729 Silver anodized 8 5/16B72141346 100100730 Titanium 8 5/16B72141350 100100727 Cosmos 8 5/16
Aluminum 8x10
pro-telo Recto h
pro-telo stainless steel 8x25
KEA SAP h (mm) h (inches)B72141101 100005293 Gloss 8 5/16B72141201 100005300 Brushed 8 5/16
B72141356 100104652 Berlin 8 5/16B72141320 100089391 Squared chrome 8 5/16
Stainless Steel 8x25
pro-telo 8x25 h
pro-telo 8x40 h
pro-telo stainless steel 8x10
KEA SAP h (mm) h (inches)B72141005 100005291 Matt URBATEK 8 5/16B72141006 100005292 Gloss URBATEK 8 5/16
Stainless Steel 8x10
pro-telo 8x10 h
30.5
mm
· 11/
4 ”30
.5 m
m · 1
1/4 ”
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
Corner profiles and trims for wall tiles
34 35
Right angle, stainless steel pro�le for corners and wall and �oor tile coverings.
Right angle, stainless steel profiles for trimming the non-glazed edge of the tile. Suitable for separating tiles in walls as well as in �oors.
pro-mate 2
pro-mate 2
Corner pro�les and trims for wall tiles
Floor and wall tileWall tile corner
Pro�le length: 2500 mm - 8 feet long
h
2 mm - 5/64”
pro-mate 2
KEA SAP h (mm) h (inches)B71342617 100126769 XLIGHT 6 1/4B71141001 100004956 8 5/16B71141002 100004957 10 25/64B71141003 100004958 12.5 1/2B71141004 100004959 15 19/32B71141005 100004960 20 25/32
V2A stainless steel
KEA SAP h (mm) h (inches)B71142001 100004966 8 5/16B71142002 100004967 10 25/64B71142003 100004968 12.5 1/2B71142004 100004969 15 19/32B71142005 100004970 20 25/32
Gloss stainless steel
KEA SAP h (mm) h (inches)B71141008 100004963 8 5/16B71141009 100004964 10 25/64B71141010 100004965 12.5 1/2
V4A Stainless steel
Right angle pro�le for corners and wall and �oor tile coverings. Decorative use as a line.
Right angle, 3 mm thick pro�les for trimming the non-glazed edge of the tile. Available in a wide variety of materials, they are also suitable for separating wall tiles.
pro-mate 3
pro-mate 3
Corner pro�les and trims for wall tiles
Floor and wall tileWall tile corner
Pro�le length: 2500 mm - 8 feet long
KEA SAP h (mm) h (inches)B71111009 100004865 White 10 25/64B71111017 100004873 White 12.5 1/2B71111010 100004866 Jazmín 10 25/64B71111018 100004874 Jazmín 12.5 1/2B71111011 100004867 Beige 10 25/64B71111019 100004875 Beige 12.5 1/2B71111012 100004868 Black 10 25/64B71111020 100004876 Black 12.5 1/2B71111013 100004869 Gray 10 25/64B71111021 100004877 Gray 12.5 1/2B71111014 100004870 Ivory 10 25/64B71111022 100004878 Ivory 12.5 1/2
PVC
KEA SAP h (mm) h (inches)B71123001 100004909 White 8 5/16B71123003 100004911 White 10 25/64B71123004 100004912 White 12.5 1/2B71123005 100004913 Beige 8 5/16B71123007 100004915 Beige 10 25/64B71123008 100004916 Beige 12.5 1/2B71123009 100004917 Black 8 5/16B71123011 100004919 Black 10 25/64B71123012 100004920 Black 12.5 1/2
Lacquered aluminum
KEA SAP h (mm) h (inches)B71342616 100126770 XLIGHT 6 1/4B71122001 100004899 8 5/16B71122002 100004900 9 23/64B71122003 100004901 10 25/64B71122004 100004902 12.5 1/2B71122005 100004903 15 19/32
Anodized aluminum silver
KEA SAP h (mm) h (inches)B71124003 100004925 10 25/64B71124004 100004926 12.5 1/2
Anodized aluminum gloss silver
KEA SAP h (mm) h (inches)B71132007 100004949 10 25/64B71132008 100004950 12.5 1/2
Gloss polished brass
KEA SAP h (mm) h (inches)B71122006 100004904 8 5/16B71122007 100004905 9 23/64B71122008 100004906 10 25/64B71122009 100004907 12.5 1/2B71122010 100004908 15 19/32
Anodized aluminum gold
KEA SAP h (mm) h (inches)B71342608 100126772 XLIGHT 6 1/4B71133001 100004951 8 5/16B71133002 100004952 9 23/64B71133003 100004953 10 25/64B71133004 100004954 12.5 1/2
Chromed brass
h
3 mm - 1/8”
pro-mate 3
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
36 37
Right angle pro�le for corners and wall and �oor tile coverings. Decorative use as a line.
Right angle and 5 mm - 13/64” edge pro�les for trimming the non-glazed edge of the tile. Suitable for transitions between �oor coverings at the same level.
pro-mate 5
pro-mate 5
Corner pro�les and trims for wall tiles
Floor and wall tileWall tile corner
Pro�le length: 2500 mm - 8 feet long
KEA SAP h (mm) h (inches)B71125003 100004927 11 7/16
Anodized aluminum silver
KEA SAP h (mm) h (inches)B71132002 100004944 11 7/16
Gloss polished brass
KEA SAP h (mm) h (inches)B71342611 100126779 XLIGHT 7 9/32B71132003 100004945 9 23/64B71132004 100004946 11 7/16B71134004 100004955 12.5 1/2
Chromed brass
h
5 mm - 13/64”
pro-mate 5
Corner pro�les and trims for wall tiles
Pro�le length: 2500 mm - 8 feet long
Decorative pro�le for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.
Right angle, corner shaped profiles, with both sides of the same length. Specially recommended for recti�ed tiles corners and for tiles with relief decoration.
pro-part Li
pro-part Li
Floor and wall tileWall tile corner
KEA SAP h (mm) h (inches)B71342618 100126780 XLIGHT 4.5 3/16B71342542 100070170 11 7/16B71342543 100070171 12.5 1/2B71342545 100073492 15 19/32
Chromed brassKEA SAP h (mm) h (inches)B72141343 100098464 11 7/16B71342550 100085153 12.5 1/2
Chromed brass corner
KEA SAP h (mm) h (inches)B71342557 100093706 11 7/16B71342556 100093705 12.5 1/2
Anodized aluminum silver corner
KEA SAP h (mm) h (inches)B71342581 100102763 11 7/16B71342580 100102762 12.5 1/2
Anodized aluminum gloss silver corner
KEA SAP h (mm) h (inches)B71342619 100128227 XLIGHT 4.5 3/16B71342539 100062074 11 7/16B71342537 100062086 12.5 1/2
Anodized aluminum silver
KEA SAP h (mm) h (inches)B71342535 100062072 11 7/16B71342538 100062073 12.5 1/2
Anodized aluminum gloss silver
pro-part Li h
h
pro-part Licorner
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
38 39Pro�le length: 2500 mm - 8 feet long
Corner pro�les and trims for wall tiles
Pro�le length: 2500 mm - 8 feet long
Decorative pro�le for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.
Right angle, corner shaped pro�les, with an 8 mm - 5/16” edge and a variable width edge. Excellent solution for a wide variety of ceramic installations.
pro-part
pro-part
Floor and wall tileWall tile corner
KEA SAP h (mm) h (inches)B73141317 100089004 11 7/16B73124004 100005353 12.5 1/2
Anodized aluminum gloss silver
KEA SAP h (mm) h (inches)B73141009 100005377 9 23/64B73141010 100005378 11 7/16B73141011 100005379 12.5 1/2
Stainless steel
KEA SAP h (mm) h (inches)B73122001 100005322 XLIGHT 7 9/32B73122002 100005323 9 23/64B73122003 100005324 11 7/16B73122004 100005325 12.5 1/2B73122005 100005326 15 19/32B73122006 100005327 20 25/32B73122007 100005328 25 63/64
Anodized aluminum silver
KEA SAP h (mm) h (inches)B73122009 100005330 9 23/64B73122010 100005331 11 7/16B73122011 100005332 12.5 1/2B73122014 100005335 25 63/64
Anodized aluminum gold
KEA SAP h (mm) h (inches)B73134001 100005368 XLIGHT 7 9/32B73134002 100005369 9 23/64B71342552 100088905 10 25/64B73134003 100005370 11 7/16B73134004 100005371 Shade 1 12.5 1/2B73141312 100033129 Shade 2 12.5 1/2B73134005 100005372 15 19/32
B73141319 100097895 Porcelanosa 11 7/16
Chromed brass
KEA SAP h (mm) h (inches)B73122301 100005336 XLIGHT 7 9/32B73122302 100005337 9 23/64B73122303 100005338 11 7/16B73122304 100005339 12.5 1/2
Anodized aluminum silver corner
KEA SAP h (mm) h (inches)B73134301 100005373 XLIGHT 7 9/32B73134302 100005374 9 23/64B71342554 100091065 10 25/64B73134303 100005375 11 7/16B73134304 100005376 12.5 1/2B71342541 100067718 15 19/32
Chromed brass corner
KEA SAP h (mm) h (inches)B73141309 100005380 9 23/64B73141310 100005381 11 7/16B73141311 100005382 12.5 1/2
Stainless steel corner
pro-part stainless steelh
8 mm - 5/16”
pro-parth
8 mm - 5/16”
Pro�le length: 2500 mm - 8 feet long
Corner pro�les and trims for wall tiles
pro-part
KEA SAP h (mm) h (inches)B73132003 100005363 11 7/16B73132004 100005364 12.5 1/2
Gloss polished brassKEA SAP h (mm) h (inches)B71342551 100088551 Black 11 7/16B71342547 100080530 Black 12.5 1/2
B71342576 100100723 White 11 7/16B71342549 100083438 White 12.5 1/2
Lacquered aluminum
pro-parth
8 mm - 5/16”
pro-partcorner
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
40 41Pro�le length: 2500 mm - 8 feet long
Rounded pro�le for protecting wall tiles corners.
These profiles are the classic solution for protecting corners in wall tile coverings. Available in a wide variety of materials, its main feature is being shock-resistant.
pro-mate 45 TOP
pro-mate 45 stainless steel
pro-mate 45 aluminum
pro-mate 45
Corner pro�les and trims for wall tiles
Wall tile cornerWall tile corner
KEA SAP h (mm) h (inches)B71342571 100100666 12.5 1/2
Anodized aluminum gloss gold
KEA SAP h (mm) h (inches)B71342562 100096222 10 25/64B71342570 100100665 12.5 1/2
Anodized aluminum gloss silver
hpro-mate 45 closed
KEA SAP h (mm) h (inches)B71342607 100126774 XLIGHT 6 1/4B71322001 100005092 8 5/16B71322003 100005094 10 25/64B71322005 100005096 12.5 1/2
Anodized aluminum silverKEA SAP h (mm) h (inches)B71322002 100005093 8 5/16B71322004 100005095 10 25/64B71322006 100005097 12.5 1/2
Anodized aluminum gold
KEA SAP h (mm) h (inches)B71342613 100126775 XLIGHT 6 1/4B71341001 100005156 8 5/16B71341002 100005157 10 25/64B71341003 100005158 12.5 1/2
V2A stainless steel
KEA SAP h (mm) h (inches)B71342001 100005160 8 5/16B71342002 100005161 10 25/64B71342003 100005162 12.5 1/2
Gloss stainless steel
KEA SAP h (mm) h (inches)B71341501 100005159 8 5/16
Stainless steel corner
KEA SAP h (mm) h (inches)B71342504 100005163 8 5/16B71342505 100005164 10 25/64B71342506 100005165 12.5 1/2
Gloss stainless steel corner
KEA SAP h (mm) h (inches)B71342563 100096461 10 25/64
Anodized aluminum gloss silver corner
hpro-mate 45 top
hpro-mate 45 open
pro-mate 45 PVC gloss
pro-mate 45 PVC matt
Corner pro�les and trims for wall tiles
KEA SAP h (mm) h (inches)B71211007 100004979 White 10 25/64B71211025 100004993 White 12.5 1/2B71211026 100004994 Jazmín 12.5 1/2B71211008 100004980 Ivory 10 25/64B71211026 100004994 Jazmín 12.5 1/2B71211009 100004981 Beige 10 25/64B71211027 100004995 Beige 12.5 1/2B71211010 100004982 Gray 10 25/64B71211028 100004996 Gray 12.5 1/2
PVC
KEA SAP h (mm) h (inches)B71311010 100005084 White 10 25/64B71311011 100005085 Jazmín 10 25/64B71311014 100005088 Ivory 10 25/64
PVC Closed
KEA SAP h (mm) h (inches)B71211325 100005027 White blister 12.5 1/2B71211317 100005023 Jazmín blister 10 25/64B71211326 100005028 Jazmín blister 12.5 1/2B71211308 100005014 Ivory blister 10 25/64B71211326 100005028 Jazmín blister 12.5 1/2B71211309 100005015 Beige blister 10 25/64B71211327 100005029 Beige blister 12.5 1/2B71211310 100005016 Gray blister 10 25/64B71211328 100005030 Gray blister 12.5 1/2
PVC corner
hpro-mate 45 gloss
pro-mate 45 PVC II
KEA SAP h (mm) h (inches)B71342512 100046964 White 10 25/64B71342510 100047009 White 12.5 1/2B71342514 100047012 Gray 10 25/64B71342513 100047010 Gray 12.5 1/2B71342515 100047013 Ivory 10 25/64B71342511 100047008 Ivory 12.5 1/2
PVC IIKEA SAP h (mm) h (inches)B71342526 100048306 White 10 25/64B71342531 100048566 White 12.5 1/2B71342527 100048304 Gray 10 25/64B71342522 100048569 Gray 12.5 1/2B71342524 100048303 Ivory 10 25/64B71342529 100048565 Ivory 12.5 1/2
PVC II corner
KEA SAP h mm h (inches)B71342610 100126773 White XLIGHT 6 1/4B71323005 100005113 White 10 25/64B71323009 100005117 White 12.5 1/2B71323006 100005114 Beige 10 25/64B71323010 100005118 Beige 12.5 1/2B71323007 100005115 Pergamon 10 25/64B71323011 100005119 Pergamon 12.5 1/2
Lacquered aluminumKEA SAP h mm h (inches)B71323505 100005142 White 10 25/64B71323516 100005147 Beige 12.5 1/2B71323507 100005144 Pergamon 10 25/64B71323517 100005148 Pergamon 12.5 1/2
Lacquered aluminum corner
pro-mate 45 aluminumh
pro-mate 45 closed
hpro-mate 45 matt
hpro-mate 45 II
Pro�le length: 2500 mm - 8 feet longPlease note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
KEA SAP h (mm) h (inches)B71342614 100126778 TOP XLIGHT 6 1/4B71342565 100099965 TOP 10 25/64B71342620 100128801 TOP 12.5 1/2
Chromed brass
KEA SAP h (mm) h (inches)B71342612 100126777 TOP XLIGHT 6 1/4
Anodized aluminium silver
pro-mate 45 brass
KEA SAP h (mm) h (inches)B71342615 100126776 XLIGHT 6 1/4B71342566 100099963 10 25/64B71342567 100099964 12.5 1/2
Chromed brassKEA SAP h (mm) h (inches)B71332003 100005155 12.5 1/2
Gloss polished brass
hpro-mate 45
KEA SAP h (mm) P/EUB71342606 100125537 10 29,95 p/u
Chromed brass corner
42 43
Wall tileWall tile corner
pro-mate 3h
3 mm
pro-mate 3
KEA SAP h (mm) h (inches)B71342608 100126772 chromed 6 1/4B71342616 100126770 silver anodized 6 1/4B71342609 100126771 white lacquered 6 1/4
pro-part pro-parth
8 mm
KEA SAP h (mm) h (inches)B73134001 100005368 chromed 7 9/32B73122001 100005322 silver anodized 7 9/32
pro-part Li pro-part Li h
a
KEA SAP h (mm) h (inches)B71342618 100126780 chromed 4.5 3/16B71342619 100128227 silver anodized 4.5 3/16
pro-mate 2h
2 mm
pro-mate 2
KEA SAP h (mm) h (inches)B71342617 100126769 stainless steel V2A 6 1/4
pro-mate 5h
5 mm
pro-mate 5
KEA SAP h (mm) h (inches)B71342611 100126779 XLIGHT 7 9/32
pro-mate 45 TOPKEA SAP h (mm) h (inches)B71342614 100126778 chromed 6 1/4B71342612 100126777 silver anodized 6 1/4
hpro-mate 45 top
pro-mate 45KEA SAP h (mm) h (inches)B71342615 100126776 chromed 6 1/4B71342607 100126774 silver anodized 6 1/4B71342610 100126773 white lacquered 6 1/4B71342613 100126775 stainless steel V2A 6 1/4
hpro-mate 45 V2A
hpro-mate 45 cerrado
Metallic pro�le for protecting corners.
Right angle, metallic pro�les for protecting corners. Most of the pro-corner models are installed after the tile, which implies a small lip over the tile surface.
pro-corner E
pro-corner mosaic
pro-corner R
pro-corner aluminum
pro-corner
Corner pro�les and trims for wall tiles
Wall tile cornerWall tile corner
Pro�le length: 2500 mm - 8 feet longPro�le length: 3000 mm - 9 feet long
Pro�le length: 2500 mm - 8 feet longPro�le length: 2500 mm - 8 feet long
Pro�le length: 2700 mm - 8 feet 1019/64 ” long
Pro�le length: 2500 mm - 8 feet long
KEA SAP h (mm) h (inches)B78122001 100005584 25 63/64B78122003 100005586 25 63/64
pro-corner BKEA SAP h (mm) h (inches)B78122005 100005588 20 25/32B78122006 100005589 25 63/64B78122008 100005591 40 11/2
pro-corner angled
KEA SAP axb mm h (mm) h (inches)B78141004 100005600 8x7 8 5/16B78141005 100005601 10x9 10 25/64B78141006 100005602 12x10 12 1/2
Stainless steel
KEA SAP h (mm) h (inches)B78141122 100092530 gloss silver 4.4 11/64B78141123 100092529 silver 4.4 11/64
Anodized aluminum
KEA SAP h (mm) h (inches)B78141107 100005618 25 63/64B78141109 100005620 40 11/2
Stainless steel
KEA SAP h (mm) h (inches)B78141112 100005623 25 63/64B78141113 100005624 30 11/4
B78141114 100005625 40 11/2
Gloss stainless steelKEA SAP h (mm) h (inches)B78141117 100005628 25 63/64B78141118 100005629 30 11/4
Brushed stainless steel
h
h
pro-corner B
ab
pro-corner E
h
h
pro-corner R
4.4 mm · 11/64
pro-corner mosaic
pro-corner angled
h
h
Please note exact measurements are in mm and imperial measurements are approximative
Corner pro�les for wall tiles less than 6 mm thick. Specially recommended for mosaics and large format and thin ceramic slabs, such as XLIGHT. Available in di�erent shapes, from right-angled pro�les for straight trims to rounded shape pro�les. Decorative use.
XLIGHT pro�les
Corner pro�les and trims for wall tiles
Pro�le length: 2500 mm - 8 feet long Please note exact measurements are in mm and imperial measurements are approximative
Technical profiles
46 47
Technical pro�les for �oor tiles and steps
Pro�le length: 2500 mm - 8 feet long
Pro�le for transitions between �oor coverings.
Pro�les for transitions between tiles or slabs with slightly di�erent heights. Available in two widths: 14 mm - 35/64” and 25 mm - 63/64”Specially recommended for transitions between ceramic tiles and wooden �oors.
pro-T
pro-T
Floor tile
KEA SAP h (mm) h (inches)B75122001 100005452 14 35/64B75122002 100005453 25 63/64
Anodized aluminum silver
KEA SAP h (mm) h (inches)B75133401 100005460 14 35/64B75133402 100005461 25 63/64
Chromed brassKEA SAP h (mm) h (inches)B75132001 100005458 14 35/64B75132002 100005459 25 63/64
Gloss polished brass
KEA SAP h (mm) h (inches)B75141005 100005464 14 35/64B75141006 100005465 25 63/64
Brushed stainless steelKEA SAP h (mm) h (inches)B75141003 100005462 14 35/64B75141004 100005463 25 63/64
Gloss stainless steel
Brass andaluminum
7 mm - 9/32”
h
Stainlesssteel
7 mm - 9/32”
h
Technical pro�les for �oor tiles and steps
Pro�le length: 2500 mm - 8 feet long
Transition pro�le between �oor coverings at di�erent levels. It covers the non-glazed edge of the tile and protects it from shocks.
Technical profiles for small height differences between floor coverings. Available in rounded �nish and sloped �nish. Specially recommended for high transit �oors.
pro-level C
pro-level R
pro-level
Floor tileFloor tile
pro-level Ch
KEA SAP h (mm) h (inches)B74122001 100005425 9 23/64B74122002 100005426 11 7/16B74122003 100005427 12.5 1/2
Anodized aluminum silver
KEA SAP h (mm) h (inches)B74132004 100005435 9 23/64B74132006 100005437 12.5 1/2
Gloss polished brass
KEA SAP h (mm) h (inches)B74122004 100005428 11 7/16B74122005 100005429 12.5 1/2B74122006 100005430 15 19/32B74122007 100005431 20 25/32
Anodized aluminum silver
pro-level Rh
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
pro-level M
KEA SAP h (mm) h (inches)B74132007 100120357 11 7/16
Anodized aluminium
pro-level Mh
48 49
Technical pro�les for �oor tiles and steps
Pro�le length: 2500 mm - 8 feet long
Pro�le for movement joints in ceramic �oor coverings.
PVC or metal pro�les with a central elastic joint for the absorption of tensions in the ceramic �oor. Available in several colours and joint widths, they are the best solution for creating intermediate movement joints.
pro-dilata PVC
pro-dilata metal
pro-dilata
Floor tile
KEA SAP h (mm) h (inches)B79211037 100005673 Gray 8 5/16B79211041 100005674 Gray 10 25/64B79211045 100005675 Gray 12.5 1/2
CFC 8 mm
KEA SAP h (mm) h (inches)B79211067 100005694 Gray 10 25/64B79211068 100005695 Gray 12.5 1/2
CFL 5 mmKEA SAP h (mm) h (inches)B79211058 100005685 White 12.5 1/2B79211055 100005682 Beige 10 25/64B79211059 100005686 Beige 12.5 1/2B79211063 100005690 Beige 15 19/32B79211056 100005683 Black 10 25/64B79211060 100005687 Black 12.5 1/2B79211064 100005691 Black 15 19/32B79211057 100005684 Gray 10 25/64B79211061 100005688 Gray 12.5 1/2B79211065 100005692 Gray 15 19/32
CFL 8 mm
KEA SAP h (mm) h (inches)B79221071 100005699 12.5 1/2B79221072 100005700 15 19/32B79221074 100005702 20 25/32
CFM 10 mm aluminum
KEA SAP h (mm) h (inches)B79241089 100005713 8 5/16B79241090 100005714 10 25/64B79241091 100005715 12.5 1/2B79241093 100005717 20 25/32B79241094 100005718 25 63/64
CFM 8 mm stainless steel
CFCCFL
5-8 mm · 13/64” - 5/16”
CFM stainless steel
10 mm - 25/64”
CFM aluminum
8 mm - 5/16”
Technical pro�les for �oor tiles and steps
BT pro�le length: 3000 mm - 13 feet longAT pro�le length: 3000 mm - 13 feet long
Pro�le for structural joints in ceramic �oor coverings.
Metallic pro�les with a central elastic joint that absorbs the structural movements of the support. Available with deformable polypropylene joint for pedestrian transit and moving metallic joint for wheeled transit.
structural joints BT
structural joints AT
Structural joints
Floor tileFloor tile
KEA SAP h (mm) h (inches)B79241098 100044392 gray 18 45/64B79241099 100044393 gray 40 11/2
B80106001 100005730 black 18 45/64B80106003 100005732 black 40 11/2
BT-40
KEA SAP h (mm) h (inches)B80106004 100005733 18 45/64B79241105 100064650 35 16/16
B80106002 100005731 50 2
AT-75
structural joint BT h
h
40 mm - 11/2”
75 mm - 3”
structural joint AT
8 mm - 5/16”
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximativeCK pro�le length: 3000 mm - 13 feet long
pro-dilata CK
Corner pro-dilata CK
KEA SAP A (mm) h (inches)B79241126 100140444 50 2B79241122 100140445 60 2 23/64
B79241123 100140446 70 2 3/4
KEA SAP A (mm) h (inches)B79241128 100140448 50 2B79241131 100140449 60 2 23/64
B79241129 100140450 70 2 3/4
CK Anodized aluminium
CK Anodized aluminium
A mm
A mm
50 51
Technical pro�les for �oor tiles and steps
Pro�le length: 2500 mm - 8 feet long
Pro�le for the making of stair steps. It substitutes the traditional step ceramic piece by a combination of ceramic tile and pro�le.
Metallic pro�les that cover the non-glazed edge of the tile, protect it from shocks and reduce the risk of slipping.
pro-step
pro-step
pro-step
StepStep
KEA SAP h (mm) h (inches)B76322001 100005507 7 9/32B76322002 100005508 9 23/64B76322003 100005509 11 7/16B76342003 100067688 13.5 17/32
Anodized aluminum silver M1
KEA SAP h (mm) h (inches)B76111026 100005493 White 11 7/16B76111027 100005494 Beige 11 7/16B76111028 100005495 Black 11 7/16B76111030 100005497 Gray 11 7/16
PVC 25
KEA SAP h (mm) h (inches)B76111011 100005478 White 11 7/16B76111013 100005480 Black 11 7/16B76111014 100005481 marrón 11 7/16B76111015 100005482 Gray 11 7/16
PVC 35
KEA SAP h (mm) h (inches)B76341001 100005522 9 23/64B76341002 100005523 11 7/16
Stainless steel M2
KEA SAP h (mm) h (inches)B76334003 100005521 11 7/16
Chromed brass M1
KEA SAP h (mm) h (inches)B76342002 100005525 11 7/16
Gloss stainless steel M2
pro-step M1 h pro-step M2 h
Technical pro�les
Pro�le length: 2500 mm - 8 feet long
Flexible pro�les for curve lines in �oors.
Flexible pro�les are available for installation in �oor and wall tiles that form curves. They can be shaped with the pro-curver machine.
pro-�ex
pro-�ex
pro-part �expro-mate 2 �ex
KEA SAP h (mm) h (inches)B74232002 100005448 11 7/16B74232003 100005449 12.5 1/2
pro-level C gloss polished brass
KEA SAP h (mm) h (inches)B73232003 100005413 11 7/16
pro-part gloss polished brass
KEA SAP h (mm) h (inches)B73222001 100005390 7 9/32B73222003 100005392 11 7/16B73222004 100005393 12.5 1/2B73222005 100005394 15 19/32B73222006 100005395 20 25/32
pro-part anodized aluminum silverKEA SAP h (mm) h (inches)B73222010 100005399 11 7/16B73222011 100005400 12.5 1/2
pro-part anodized aluminum gold
KEA SAP h (mm) h (inches)B71422106 100005194 10 25/64
pro-mate 45 anodized aluminum silverKEA SAP h (mm) h (inches)B71422107 100005195 10 25/64B71422112 100005200 12.5 1/2
pro-mate 45 anodized aluminum gold
KEA SAP h (mm) h (inches)B71441002 100005223 10 25/64B71441003 100005224 12.5 1/2
pro-mate 2 stainless steel V2AKEA SAP h (mm) h (inches)B71442001 100005225 8 5/16B71442002 100005226 10 25/64
pro-mate 2 stainless steel gloss V2A
KEA SAP h (mm) h (inches)B71422001 100005179 8 5/16B71422002 100005180 9 23/64B71422003 100005181 10 25/64B71422004 100005182 12.5 1/2B71422005 100005183 15 19/32
pro-mate 3 anodized aluminum silver
h
3 mm - 1/8”
pro-mate 3 pro-parth
8 mm - 5/16”
hpro-mate 45 abierto
hpro-mate 45 cerrado
pro-step PVC 25 / 35
h
25 - 35 mm · 63/64 “ - 13/16”
Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative
52 53
Technical pro�les
Pro�le length: 2500 mm - 8 feet long
pro-plint R consists of a base and a top pro�le.
Includes right and left caps.
Metallic skirting for �oor tile coverings.
Metallic pro�les for skirtings. They have a high mechanical resistance with a functional, modern design. Specially recommended for o�ce �oors and raised access �oors.
pro-plint stainless steel
pro-plint
Floor skirtingFloor skirting
KEA SAP h (mm) h (inches)B79141001 100005635 Gloss 80 3B79141002 100005636 Brushed 80 3
Stainless steel
pro-plinth
pro-plint aluminum R
KEA SAP h (mm) h (inches)B79123001 100005633 Base 80 3B79123002 100005634 Top 80 3
Anodized aluminumKEA SAP h (mm) h (inches)B79141505 100007584 Outer 80 3B79141506 100007585 Internal 80 3
Pro-plint R corner
KEA SAP h (mm) h (inches)B79141507 100031428 Cap set 80 3
Special pieces
pro-plint Rh
KEA SAP h (mm) h (inches)B79141508 100073104 Silver 80 3
Anodized aluminumKEA SAP h (mm) h (inches)B79141509 100073106 Inner 80 3B79141513 100073105 Outer 80 3
Pro-plint corner
KEA SAP h (mm) h (inches)B79141510 100073109 Pro�le joining piece 80 3B79141511 100073107 Right trim 80 3B79141512 100073108 Left trim 80 3
Special pieces
pro-plint aluminum pro-plinth
pro-plint R PVCcap set
pro-plint R PVCouter angle
pro-plint R PVCinner angle
Please note exact measurements are in mm and imperial measurements are approximative
Technical pro�les
pro-sanit U1 and pro-sanit U2 pro�les length: 2500 mm - 8 feet longpro-sanit S1 and pro-sanit S3 pro�les length: 1830 mm - 6 feet long
Concave pro�le for installation where walls and �oors meet or between wall coverings and bathtubs, shower trays or other bath elements. It substitutes the traditional curve ceramic piece.
It reduces the risk of water leakage and eases cleaning and preservation of angles between �oor and wall coverings.
pro-sanit U2
pro-sanit U1
pro-sanit S1
pro-sanit
Floor covering trimsBathtubs and showers trims
KEA SAP h (mm) h (inches)B77111005 100005530 White 9 23/64B77111008 100005533 Ivory 9 23/64
PVC
KEA SAP h (mm) h (inches)B77199017 100062077 16 5/8B77199015 100062078 22 7/8
Anodized aluminum silverKEA SAP h (mm) h (inches)B77199014 100062075 16 5/8B77199018 100062076 22 7/8
Aluminum gloss silver
KEA SAP h (mm) h (inches)B77199013 100062079 White 16 5/8B77199016 100062080 White 22 7/8
Lacquered aluminum
KEA SAP h (mm) h (inches)B77111013 100005538 White 9 23/64B77111016 100005541 Ivory 9 23/64B77111017 100005542 White 11 7/16B77111020 100005545 Ivory 11 7/16
PVC
KEA SAP h (mm) h (inches)B77141001 100005566 gloss 12.5 1/2B77142001 100005569 brushed 12.5 1/2
Stainless steelKEA SAP h (mm) h (inches)B77141501 100005567 Gloss Outer 12.5 1/2B77141502 100005568 Gloss Inner 12.5 1/2B77142501 100005570 Brushed outer 12.5 1/2B77142502 100005571 Brushed internal 12.5 1/2
Stainless steel corner
KEA SAP h (mm) h (inches)B77111029 100005554 White 23 29/32
PVC
pro-sanit U1 PVC h
pro-sanit U2
h
h
pro-sanit S123 mm - 29/32”
17.5 mm - 11/16”
pro-sanit S3
KEA SAP h (mm) h (inches)B77111035 100005560 White 23 29/32
PVCKEA SAP h (mm) h (inches)B77111038 100005563 white (4 u.) 23 29/32
Side cap
pro-sanit S3
32 mm - 1 1/4”pro-sanit S3
trim caps
Please note exact measurements are in mm and imperial measurements are approximative
pro-sanit U1 alu
h
54
Floor skirting
pro-skirting
KEA SAP h (mm) h (inches)B79141522 100120374 60 2 23/64
KEA SAP h (mm) h (inches)B79141521 100120373 60 2 23/64
KEA SAP h (mm) h (inches)B79141527 100126826 60 2 23/64
Chromed aluminum
White lacquered aluminum
Anodized aluminum
KEA SAP h (mm) h (inches)B79141525 100121362 60 2 23/64
KEA SAP h (mm) h (inches)B79141524 100121361 60 2 23/64
KEA SAP h (mm) h (inches)B79141526 100126827 60 2 23/64
Chromed aluminum corner
White lacquered aluminum corner
Anodized aluminum corner
pro-skirtingh
10 mm
Technical pro�les
Metallic skirting for �oor tile coverings. Metal pro�les in �ve �nishes and straight trims. They replace traditional ceramic skirting. Specially recommended for shops and public buildings.
pro-skirting
Cement-based adhesivestixocemone-�exsuper-�ex S2
Reactive resins adhesivepolitech n
Additives for cement-based adhesivesunilax
Façade �xingsconcealed façade �xings
Adhesives for ceramictile �xing
585960
61
62
63
58 59
tixocem
Cement-based adhesives
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
tixocem is a single-component, thin-set mortar for interior and exterior installations of stone, ceramic, porcelain and quarry tile. This mortar is formulated with a unique dry polymer, resulting in good adhesion to the substrate and tile.
Single-component, high-tech adhesive for laying absorbent ceramic tiles. Excellent workability, easy to apply with extended working times. No sagging.
tixocem
Features:
• Single-component thin-set mortar• Good adhesion to the substrate and tile.• Open time > 20 min.• Economical polymer-modi�ed mortar.• Mixing water: 5.25 US qts. per 50 lbs. bag
Recommended use:
• Most interior residential installations on �oors and walls.• Most interior commercial installations on �oors.• Most interior commercial installations on walls.• Do not use in swimming pools or installations subject to prolonged water
immersion.• tixocem is not recommended for areas subject to severe freeze/thaw conditions.
Coverage:
• ¼” x ¼” notched trowel 75 to 90 sq.ft. per 50 lbs. bag• ¼” x 3/8” notched trowel 55 to 65 sq.ft. per 50 lbs. bag• ½ x ½” notched trowel 35 to 45 sq.ft. per 50 lbs. bag
Coverage:
• ¼” x ¼” notched trowel 75 to 90 sq.ft. per 50 lbs. bag• ¼” x 3/8” notched trowel 55 to 65 sq.ft. per 50 lbs. bag• ½ x ½” notched trowel 35 to 45 sq.ft. per 50 lbs. bag
Substrates:
• Masonry cement block, brick, cement mortar beds and leveling coats.• Concrete (cured at least 28 days).• Cement backer units (CBUs).• Gypsum wallboard for interior walls in dry areas only.• Do not use directly over gypsum-based substrates. Over this kind of substrates
apply suitable sealer before use. butech recommends uniprim, acrilic primer for cement and gypsum substrates.
• Do not use over dimensionally unstable substrates such as hardwood �ooring, oriented strand board (OSB), substrates containing asbestos, or metal.
• Do not use over hardwood, exterior grade plywood, vinyl covered wall board, plastic surfaces, glass, cement asbestos board, metal, particle board or asphalt sheeting.
Certi�cations/Standards:
ISO 13007 C2ANSI: Exceeds ANSI A118.4
Materials:
• Ceramic and porcelain tiles (water absorption < 0.5% according EN-ISO 10545-3).• Quarry tiles• Natural stone.• Do not use for porcelain tiles 18” x 18” ( 38 x 38 cm ) or larger tiles.• Do not use for moisture-sensitive stone, agglomerate tiles, DQS, cultured marble
or resin-backed tiles. Instead, use suitable epoxy adhesive.
Presentation Europallet50 lbs. (22.7 kgs.) 3000 lb / palet50 lbs. (22.7 kgs.) 3000 lb / palet
Packagingtixocem
wall tile �oor tile �oor tileporcelain tile
mediumformat
large format outdoor
Bathrooms and kitchens
Cement-based adhesives
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
one-flex is a high tech single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Formulated with low-dust technology, one-�ex reduces dust by 90% during pouring and mixing, resulting in a cleaner environment.
Advanced, high-performance adhesive, with an excellent adherence and flexibility, suitable for the most di�cult installations, like high tra�c �oors, radiant heating �oors or façades. Its performance and ease of application make it the ideal solution for the most demanding professionals. Specially recommended for laying recti�ed tiles.
Features:
• Single-component thin-set mortar• Polymer-enriched for high performance and deformability• Low-dust technology reduces dust by 90% resulting in a cleaner environment.• Smooth and creamy consistency for easy for easy application.• Open time > 30 min.• Mixing water: 5,5 US qts. per 50 lbs. bag.
Recommended use:
• Most interior/exterior residential installations on �oors and walls.• Most interior/exterior commercial installations on �oors and walls.• Installation of ceramic and porcelain tile, quarry tile, pavers, and many types of
marble, granite and natural stone.• Swimming pools or installations subject to prolonged water immersion.• one-flex mixed with water is not recommended for areas subject to severe
freeze/thaw conditions. one-�ex must be mixed with unilax.
Substrates:
• Masonry cement blocks, bricks, cement mortar beds and levelling coats.• Concrete (cured at least 28 days).• Cement backer units (CBUs).• Gypsum wallboard for interior walls in dry areas only.• APA and CANPLY Group 1 exterior-grade plywood (interior, residential and light
commercial in dry conditions only).• Properly prepared vinyl composition tile (VCT) and cutback residue (interior
only).• Properly prepared existing ceramic and porcelain tile, quarry tile and pavers
(interior only).
• Do not use directly over gypsum-based substrates. Over this kind of substrates apply suitable sealer before use. butech recommends uniprim, acrilic primer for cement and gypsum substrates.
Standards and approvals:
ISO 13007 C2 E P1ANSI: Exceeds ANSI A118.4 and A118.11
Materials:
• Ceramic and porcelain tiles ( water absorption < 0.5% according EN-ISO 10545-3 ).• Quarry tiles• Glass and mosaic tiles• Natural stone.• Do not use for moisture-sensitive stone, agglomerate tiles, DQS, cultured marble
or resin-backed tiles. Instead, use suitable epoxy adhesive.
KEAB11903900 tixocem whiteB11904900 tixocem gray
KEAB12903900 one-�ex whiteB12904900 one-�ex gray
Presentation Europallet50 lbs. (22.7 kgs.) 3000 lb / palet50 lbs. (22.7 kgs.) 3000 lb / palet
Packaging
ston-ker glassmosaic
large sizetiles
plywood hightra�c
swimming poolsone-�ex
one-�ex
one-�ex
• Tile 8” x 13” ( 20 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 13” ( 30 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 24“ ( 30 x 60 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 18” x 18“ ( 44 x 44 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 13” x 36“ ( 30 x 90 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 18” x 24” ( 44 x 66 cm ) 1.0 lb/ sqft ( 5 kg / m2 )
• Tile 8” x 13” ( 20 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 13” ( 30 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 24“ ( 30 x 60 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 18” x 18“ ( 44 x 44 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 13” x 36“ ( 30 x 90 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 18” x 24” ( 44 x 66 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 24” x 24” ( 60 x 60 cm ) 1.25 lb/ sqft ( 6 kg / m2 )• Tile 24” x 48” ( 60 x 120 cm ) 1.25 lb/ sqft ( 6 kg / m2 )
Porcelain �oor tiles and swimming pools
60 61
politech n
Reactive resins adhesive
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
politech n is a type R2 T high-tech, two-component polyurethane adhesive as per EN 12004, for laying tiles on deformable substrates. Specially recommended for special substrates like metal sheets or synthetic materials, where cement-based adhesives cannot be used.
A high-tech two-component polyurethane adhesive with high performance properties. Suitable for laying ceramic tiles of all kinds on deformable substrates.
politech n
Features:
• Two-component polyurethane adhesive.• Excellent adherence. Maximum deformability.• No water absorption. Waterproof.• High chemical resistance.• High initial adherence and no sagging.• Application thickness up to 8 mm.• Frost-resistant.
Recommended use:
• Laying of wall tiles not compatible with cement-based adhesives.• Wall tiles on substrates not compatible with cement-based adhesives.• Floor tiles on deformable substrates.• Floor tiles with special chemical resistance.• Laying of slate and other natural stones with risk of deformation by water
absorption.• Substrate waterproo�ng.
Substrates:
• Concrete or mortar substrates.• Plasterboards and plaster or anhydrite walls.• Plasterboards/wood boards.• Existing wall tiles.• Metal sheets.• Polyester or PVC surfaces.
Certi�cations/Standards:
EN 12004 R2 T
Materials:
• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.• Krion slabs and other kinds of Solid Surface.
KEA SAPB41061001 100004369 politech n white
Presentation Europallet22 lbs./bucket 792 lb /palet
Packagingpolitech n
ston-ker large sizetiles
wood metal
Metal stairs
PVC waterproof
Coverage:
• ¼” x ¼” notched trowel 33 to 40 sq.ft. per 22 lbs. bucket• ¼” x 3/8” notched trowel 24 to 28 sq.ft. per 22 lbs. bucket• ½ x ½” notched trowel 15 to 20 sq.ft. per 22 lbs. bucket
Cement-based adhesives
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
super-�ex S2 is a type C2 TE S2 high-performance no dust cement-based adhesive, as per EN 12004, for laying all kinds of ceramic tiles on the most used substrates in the building industry. Specially recommended for laying large format, thin porcelain tiles like XLIGHT from URBATEK.
This adhesive features excellent performance in adherence and deformability with no need for mixing with additives and excellent conditions of use: low dust generation and an only 15 kg package. This state-of-the-art adhesive includes additives and polymers which increase performance. This means that with a 15 kg bag of super-�ex S2 you can lay the same tiles surface than with a 25 kg bag of regular adhesive.
Features:
• Cement-based, single component adhesive.• Lightened adhesive. Low consumption onsite.• Low emission of dust and other airborne particles.• Maximum adherence and deformability.• High initial adherence and no sagging. Thixotropic.• Extended working times. Open time higher than 30 min.• Application thickness up to 10 mm.• Frost-resistant.• Mixing water: 8 l per 15 kg bag
Recommended use:
• Indoor coverings with ceramic sheets like XLIGHT.• Laying of ceramics in refurbishing jobs.• Indoor large format ceramic tile coverings.• Indoor and outdoor porcelain tile coverings.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.
Substrates:
• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Existing wall tiles.• On anhydrite or plaster substrates apply uniprim.
Standards and approvals:
EN 12004 C2 TE S2
Materials:
• Large format ceramics.• Porcelain tiles (water absorption < 0.5% as per EN-ISO 10545-3).• Large format, thin porcelain tiles like XLIGHT.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.
KEA SAPB12909017 100142757 super-�ex S2 white
Presentation Europallet33 lbs. (15 kgs.) 2200 lb /palet
Packaging
super-�ex S2
super-�ex S2
super-�ex S2
• Tile 8” x 13” ( 20 x 30 cm ) 0.45 lb/sqft (2.00 kg / m2)• Tile 13” x 13” ( 30 x 30 cm ) 0.45 lb/sqft (2.00 kg / m2)• Tile 13” x 24“ ( 30 x 60 cm ) 0.55 lb/sqft (2.50 kg / m2)• Tile 18” x 18“ ( 44 x 44 cm ) 0.55 lb/sqft (2.50 kg / m2)• Tile 13” x 36“ ( 30 x 90 cm ) 0.65 lb/sqft (3.00 kg / m2)• Tile 18” x 24” ( 44 x 66 cm ) 0.65 lb/sqft (3.00 kg / m2)• Tile 24” x 24” ( 60 x 60 cm ) 0.75 lb/sqft (3.56 kg / m2)• Tile 24” x 48” ( 60 x 120 cm ) 0.75 lb/sqft (3.56 kg / m2)
XLIGHT coverings
Coverage:
ston-ker XLIGHT glass mosaic
large format existing ceramics
high tra�c
6362
Minimum A/T joint 4
Minimum A/T joint 8
Minimum I joint Minimum A/T joint 16
Presentation50 u. bag
Presentation50 u. bag50 u. bag50 u. bag
concealed façade �xings
Façade �xings
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.For further information on additional materials refer to the corresponding page in this catalogue.
Innovative concealed fixing clip for ceramic tiles in bonded façades. The fixings fit within small slots done on the porcelain piece and are anchored to the support by a stainless steel screw. Once the joints are grouted, the �xings are not visible anymore, not a�ecting the façade design.
These �xings have been designed as a security element in porcelain tile walls installed by the thin layer, double bonding method. We recommend the use of type C2 S2 cement-based adhesives as per EN 12004.
As a general rule, we recommend this kind of �xing from a height corresponding to �rst concrete slab. In any case, standards in force must be observed for every project.
Concealed bonded façades �xings
Features:
• 1.4301 (AISI 304 V2A) stainless steel clips.• Suitable for 5 mm - 7 mm · 13/64” - 17/64” wide joints.• Suitable for tiles 9 mm to 12 mm · 15/32“ to 23/64” thick.• Start �xings available in 80 · 3” and 160 · 6” mm lengths for overhanging instal-
lations.• Includes stainless steel screw and plug.
Recommended use:
• Laying of tiles in façades.• Laying of ceramics in ceilings and cornices.• Indoor laying of large format porcelain tiles at a certain height.
Coverage:
Coverage changes with every façade design. In the case of a regular façade with no gaps, clip calculation would be the following:
Tile Type I �xings Type A/T �xings cm - inches un./sq.ft. un./sq.ft.
44 x 66 - 18 x 24 0,51 0,13
60 x 60 - 24 x 24 0,42 0,10
45 x 90 - 18 x 36 0,37 0,09
60 x 120 - 24 x 68 0,32 0,08
Additional materials:
Substrates:
• Cement covered �oors and walls .• Concrete slabs.
Materials:
• Medium and large format porcelain tiles resistant to side slotting: - STON-KER - PAR-KER - URBATEK
KEA SAP concealed �xingB80111001 100005743 minimum I joint
KEA SAP concealed �xingB80111002 100005744 minimum A/T joint 4 cmB80111003 100005745 minimum A/T joint 8cmB80400012 100032736 minimum A/T joint 16cm
one-�ex 1,25 - 1,50 lb/ sqftunilax 0,30 - 0,35 lb/ sqft
Packagingconcealed façade �xings
Façades
outdoor joint< 5 mm
< 13/64 “
joint 5-7 mm
13/64” - 17/64”
�oor tile porcelain tile
ston-kerslotted
urbatekslottedunilax
Additives for cement-based adhesives
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
unilax is a latex that, mixed with cement-based adhesives like one-�ex, fr-one n or super one n, rapimax n or maxi�uid improves bonding strength and �exibility up to level C2 S2 as per EN 12004. Specially recommended for laying wall tiles outdoors.
A resin-based latex that can be added to cement-based adhesives to enhance their bonding strength and �exibility. Specially recommended for exterior façades.
unilax
Features:
• Water-based acrylic resins latex.• Resistant to the most common chemicals.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.
Recommended use:
• Laying of tiles in façades.• Large format ceramic �oor tiles on radiant heating.• Indoor large format ceramic tile coverings on deformable substrates.• Indoor and outdoor porcelain tile coverings.• High tra�c �oor tiles.• Pools and damp environments.
Substrates:
• Concrete or mortar substrates.• Plasterboards.• Plywood panels.• Existing wall tiles.
Materials:
• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.
KEA SAPB51601002 100004376 unilaxB51602002 100004377 unilax
Presentation Europallet44 lbs./bucket 1233 lb /palet11 lbs./bucket 1057 lb /palet
Packagingunilax
exterior�oor
under�oorheating
swimming pools
bondedfaçades
tixocem one-�ex
Coverage:
Product % US qts. lbs/bag
tixocem 22% 5,0 - 5,5 50
one-�ex 23% 5,0 - 6,0 50
Façades
Cement-based materials for tile jointscolorstuk 0-4colorstuk 2-12colorstuk especial ncolorstuk rapid n
Epoxy grouting materialsepotech aquaepotech crystalepotech gold & silverepotech
Leveling system for ceramic tiles.Self-leveling spacers
Elastic joint sealantss-107s-107 np-404
Additive for grouting materialcl-stuk
66687072
74757677
78
808182
83
Grouting material andelastic sealants
66 67
COLORSTUK 0-4
colorstuk 0-4
Cement-based materials for tile joints
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
* Replace mixing water by cl-stuk.
colorstuk 0-4 is a type CG 2 �ne grain grouting material as per EN 13888, for grouting joints up to 4 mm. It is easy to apply, resistant and colour stable, and it is specially recommended for recti�ed tiles.
A high-tech, �ne grained colored mortar for grouting tile joints from 0 to 4 mm · 3/16”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.
colorstuk 0-4
Features:
• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints up to 4 mm · 3/16”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide colour range.
Recommended use:
• Tile joints up to 4 mm · 3/16”.• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.In the following applications, replace mixing water by cl-stuk additive.• Outdoor �oors.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.
Substrates:
• All usual substrates for ceramic tiles laying.
Certi�cations/Standards:
EN 13888 CG2
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.In the following applications, replace mixing water by cl-stuk additive.• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.
glassmosaic
recti�edceramics
indoors hightra�c
pools radiantheating
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
Packagingcolorstuk 0-4KEA SAPB21501001 100004253 whiteB21502002 100004255 manhattanB21502003 100004256 bahamaB21502004 100004257 cementB21502005 100004258 anthraciteB21502006 100004259 blackB21502009 100004260 ivoryB21502010 100004261 brownB21502016 100004262 beigeB21522218 100060532 caramelB21522217 100060533 mokaB21522219 100060534 gray
B21901001 100004287 whiteB21902002 100004288 manhattan
Presentation Europallet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet
55 lb bag 2200 lb /palet55 lb bag 2200 lb /palet
Bath environments
Coverage
TILE SIZEGROUT JOINT WIDTH
Coverages in sq.ft. (m2) per 11 lbs. (5 kg)Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm)
1" x 1" x 1/4" (25x25x6 mm) 50 (5) 25 (2)2" x 2" x 1/4" (50x50x6 mm) 100 (9) 50 (5)3" x 3" x 1/4" (75x75x6 mm) 149 (14) 75 (7)8" x 12" x 3/8" (200x316x10 mm) 292 (27) 147 (14)12" x 12" x 3/8" (316x316x10 mm) 379 (35) 189 (18)12" x 18" x 3/8" (316x446x10 mm) 441 (41) 221 (21)12" x 23" x 3/8" (316x596x10 mm) 494 (46) 247 (23)18" x 18" x 3/8" (446x446x10 mm) 533 (50) 266 (25)12" x 35" x 3/8" (316x900x10 mm) 560 (52) 280 (26)17" x 26" x 3/8" (435x659x10 mm) 626 (58) 313 (29)23" x 23" x 3/8" (596x596x10 mm) 708 (66) 356 (33)23" x 47" x 3/8" (596x1200x10 mm) 944 (88) 476 (44)32" x 32" x 3/8" (800x800x10 mm) 961 (89) 476 (44)7" x 26" x 3/8" (180x659x10 mm) 338 (31) 169 (16)8" x 47" x 1/4" (193x1200x10 mm) 399 (37) 169 (16)
68 69
COLORSTUK 2-12
colorstuk 2-12
Cement-based materials for tile joints
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
colorstuk 2-12 is a type CG 2 �ne grain grouting material as per EN 13888, for grouting joints from 2,5 to 12 mm · 1/8” to 1/2”. It is easy to apply, resistant and colour stable, and it is specially recommended for �oors with a wide joint.
A high-tech, �ne grained colored mortar for grouting tile joints from 2,5 to 12 mm · 1/8” to 1/2”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.
colorstuk 2-12
Features:
• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints from 2,5 to 12 mm · 1/8” to 1/2”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide colour range.
Recommended use:
• Tile joints from 2,5 to 12 mm · 1/8” to 1/2”.• Indoor wall tile coverings with wide joint.• Indoor �oors. Specially recommended for rustic tiles.In the following applications, replace mixing water with cl-stuk additive.• Outdoor �oor and wall tiles.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.
Substrates:
• All usual substrates for ceramic tiles laying.
Certi�cations/Standards:
EN 13888 CG2
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.• Terracotta tiles.In the following applications, replace mixing water with cl-stuk additive.• Ceramic tiles with relief to be covered with grouting material.
KEA SAPB21522002 100004273 manhattanB21522003 100004274 bahamaB21522004 100004275 cementB21522005 100004276 anthraciteB21522006 100004277 blackB21522009 100004278 ivoryB21522016 100004279 beigeB21521001 100004271 whiteB21522224 100060541 grayB21522223 100060544 mokaB21522221 100060547 caramelB21522222 100060548 brown
B21922002 100004289 manhattanB21922003 100004290 cementB21922004 100004291 anthracite
Presentation Europallet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet
55 lb bag 2.200 lb/palet55 lb bag 2.200 lb/palet55 lb bag 2.200 lb/palet
Packagingcolorstuk 2-12
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
Coverage
rustic recti�edceramics
indoors hightra�c
outdoor�oors
Rustic �oors
radiantheating
* Replace mixing water by cl-stuk.
TILE SIZEGROUT JOINT WIDTH
Coverages in sq.ft. (m2) per 11 lbs. (5 kg)Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm) 1/2” (12 mm )
1" x 1" x 1/4" (25x25x6 mm) 23 (2) 12 (1) 7 (0,5) 6 (0,5)2" x 2" x 1/4" (50x50x6 mm) 47 (4) 23 (2) 14 (1) 12 (1)3" x 3" x 1/4" (75x75x6 mm) 70 (7) 35 (3 21 (2) 18 (2)8" x 12" x 3/8" (200x316x10 mm) 137 (13) 69 (6) 41 (4) 34 (3)12" x 12" x 3/8" (316x316x10 mm) 177 (16) 88(8) 53 (5) 44(4)12" x 18" x 3/8" (316x446x10 mm) 207 (19) 104 (10) 62 (6) 52 (5)12" x 23" x 3/8" (316x596x10 mm) 232 (22) 116 (11) 69 (6) 58 (5)18" x 18" x 3/8" (446x446x10 mm) 250 (23) 125 (12) 75 (7) 62 (6)12" x 35" x 3/8" (316x900x10 mm) 262 (24) 131 (12) 79 (7) 66 (6)17" x 26" x 3/8" (435x659x10 mm) 294 (27) 147 (14) 88 (8) 73 (7)23" x 23" x 3/8" (596x596x10 mm) 334 (31) 167 (16) 100 (9) 84 (8)23" x 47" x 3/8" (596x1200x10 mm) 445 (41) 223 (21) 134 (12) 112 (10)32" x 32" x 3/8" (800x800x10 mm) 448 (42) 224 (21) 135 (13) 112 (10)
70 71
COLORSTUK ESPECIAL N
Cement-based materials for tile joints
colorstuk especial n is a type CG 2 very �ne grain grouting material as per EN 13888, for grouting joints up to 4,5 mm · 3/16”. Its formula includes ultra�ne aggregates, which make it specially recommended for tiles with a glaze sensitive to scratching.
A high-tech, �ne grained colored mortar for grouting tile joints up to 4,5 mm · 3/16”. Specially recommended for grouting recti�ed ceramic tiles sensible to scratching.
Features:
• Cement-based, single-component, colored mortar.• Ultra�ne aggregates formula.• Fine texture mortar for grouting tile joints up to 4,5 mm · 3/16”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide special colours range.
Recommended use:
• Tile joints up to 4,5 mm.• Ceramic tiles with low hardness glaze as per Mohs scale.• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.In the following applications, replace mixing water with cl-stuk additive.• Wall and �oor tiles into direct contact with water.• Floor tiles on radiant heating.
Substrates:
• All usual substrates for ceramic tiles laying.
Certi�cations/Standards:
EN 13888 CG2
Materials:
• Absorbent and non-absorbent ceramic tiles.• Ceramic tiles with special �nishes.• Glass mosaic.• Natural stone and marble not prone to staining.• Do not use on polished materials.In the following applications, replace mixing water by cl-stuk additive.• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.
KEA SAPB2430242 100090682 acidB2430249 100090684 cherryB2430243 100090685 darkB2430247 100090686 mokaB2430242 100090687 nacareB2430244 100090689 vanillaB2430246 100090690 white B2430251 100097181 graphite
Presentation Europallet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet
Packagingcolorstuk especial n
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
glassmosaic
recti�edceramics
bathenvironments
Crystalseries
Bath environments
radiantheating
hightra�c
* Replace mixing water by cl-stuk.
colorstuk especial n
colorstuk especial n
Coverage
TILE SIZEGROUT JOINT WIDTH
Coverages in sq.ft. (m2) per 4,4 lbs. (2 kg)Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm)
1" x 1" x 1/4" (25x25x6 mm) 18,8 (2) 9,2 (1)2" x 2" x 1/4" (50x50x6 mm) 15,6 (1) 18,8 (2)3" x 3" x 1/4" (75x75x6 mm) 56 (5) 28 (3)8" x 12" x 3/8" (200x316x10 mm) 110,4 (10) 5,2 (0,5)12" x 12" x 3/8" (316x316x10 mm) 141,6 (13) 70,8 (7)12" x 18" x 3/8" (316x446x10 mm) 165,6 (15) 82,8 (8)12" x 23" x 3/8" (316x596x10 mm) 185,6 (17) 92,8 (9)18" x 18" x 3/8" (446x446x10 mm) 199,2 (18) 100 (9)12" x 35" x 3/8" (316x900x10 mm) 208,8 (19) 104,8 (10)17" x 26" x 3/8" (435x659x10 mm) 244,4 (22) 117,6 (11)23" x 23" x 3/8" (596x596x10 mm) 265,6 (24) 133,6 (12)23" x 47" x 3/8" (596x1200x10 mm) 358,8 (33) 178 (16)32" x 32" x 3/8" (800x800x10 mm) 358,8 (33) 179,2 (16)7" x 26" x 3/8" (180x659x10 mm) 127,6 (12) 63,2 (6)8" x 47" x 1/4" (193x1200x10 mm) 149,6 (14) 74,4 (7)
72 73
COLORSTUK RAPID
Cement-based materials for tile joints
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
colorstuk rapid n is a type CG 2 high-performance, cement-based grouting material as per EN 13888, for grouting joints from 1,5 to 16 mm - 1/16” to 5/8”. Suitable for all kinds of ceramic tiles and natural stone, it is specially recommended for outdoor applications and permanently damp environments . A high-tech, fine grained colored mortar with fast setting and hardening times for grouting tile joints from 1,5 to 16 mm - 1/16” to 5/8”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.
Features:
• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints from 1,5 to 16 mm - 1/16” to 5/8”.• Mortar with fast setting and hardening times.• It prevents e�orescences.• Excellent mechanical resistance.• Resistant to heat and UV radiation.• Frost-resistant.• Waterproof mortar.• Anti-mold action.• Easy to apply and clean.• Wide colour range.
Recommended use:
• Tile joints from 1,5 to 16 mm - 1/16” to 5/8”.• Indoor wall and �oor tiles.• Outdoor �oors and terraces.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.• Outdoor wall tiles in façades.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Tiles with mosaic-like patterns.• Glass mosaic.• Clay and terracotta tiles.• Natural stone and marble not prone to staining.
Presentation Europallet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet
55 lb bag 2.200 lb/palet
Packagingcolorstuk rapid n
Certi�cations/Standards:
EN 13888 CG2 Ar W
KEA SAPB22501001 100004294 whiteB22502002 100004295 manhattanB22502003 100004296 bahamaB22502004 100004297 cementB22502005 100004298 anthraciteB22502006 100004299 blackB22502007 100004300 caramelB22502008 100004301 terracottaB22502009 100004302 ivoryB22502010 100004303 brownB22502011 100004304 tobaccoB22502013 100004305 grayB22502016 100004308 beigeB21522220 100060549 moka
B22902002 100004309 black
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
Coverage
glassmosaic
recti�edceramics
high tra�c bathroomenvironments
pools façades
Outdoor �oors
colorstuk rapid n
colorstuk rapid n
TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 11 lbs. (5 kg)
Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm) 3/16” (4,5 mm ) 1/4” (6 mm) 3/8” (10 mm) 1/2” (12 mm )1" x 1" x 1/4" (25x25x6 mm) 50 (5) 25 (2) 17 (1,5) 12 (1) 7 (0,5) 6 (0,5)2" x 2" x 1/4" (50x50x6 mm) 100 (9) 50 (5) 33 (3) 25 (2) 15 (1) 12 (1)3" x 3" x 1/4" (75x75x6 mm) 149 (14) 75 (7) 50 (5) 37 (3) 22 (2) 19 (2)8" x 12" x 3/8" (200x316x10 mm) 292 (27) 147 (14) 98 (9) 73 (7) 44 (4) 37 (3)12" x 12" x 3/8" (316x316x10 mm) 379 (35) 189 (18) 126 (12) 94 (9) 57 (5) 47 (4)12" x 18" x 3/8" (316x446x10 mm) 441 (41) 221 (21) 147 (14) 110 (10) 66 (6) 55 (5)12" x 23" x 3/8" (316x596x10 mm) 494 (46) 247 (23) 165 (15) 123 (11) 74 (7) 62 (6)18" x 18" x 3/8" (446x446x10 mm) 533 (50) 266 (25) 178 (17) 133 (12) 80 (7) 67 (6)12" x 35" x 3/8" (316x900x10 mm) 560 (52) 280 (26) 186 (17) 140 (13) 84 (8) 70 (6)17" x 26" x 3/8" (435x659x10 mm) 626 (58) 313 (29) 209 (19) 157 (15) 94 (9) 114 (11)23" x 23" x 3/8" (596x596x10 mm) 708 (66) 356 (33) 237 (22) 178 (17) 107 (10) 89 (8)23" x 47" x 3/8" (596x1200x10 mm) 944 (88) 476 (44) 316 (29) 238 (22) 143 (13) 119 (11)32" x 32" x 3/8" (800x800x10 mm) 961 (81) 476 (44) 318 (30) 239 (22) 143 (13) 120 (11)7" x 26" x 3/8" (180x659x10 mm) 338 (31) 169 (16) 113 (10) 84 (8) 51 (5) 42 (4)8" x 47" x 1/4" (193x1200x10 mm) 399 (37) 199 (18) 133 (12) 99 (9) 60 (6) 50 (5)
7574
EPOTECH AQUAEPOTECH CRYSTAL
Certi�cations/Standards:
EN 13888 RG
epotech aqua
Epoxy grouting materials
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
epotech aqua is a new line of epoxy putties for grouting tile joints. Two-component epoxy putty with no organic solvents. It is waterproof, it has outstanding chemical and mechanical properties and it is easy to apply. Specially recommended for application on mosaics and ceramic tiles with relief.
This material is suitable for grouting joints from 0 to 10 mm · 3/8” in �oor and wall tiles, indoors and out. Excellent resistance to chemicals. Suitable for pools and permanently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic or natural stone.
epotech aqua
Features:
• Two-component colored epoxy putty.• Easy to apply and clean. This product is free of organic solvents and plasticizers• Excellent joint colour stability.• Resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Tile joints up to 10 mm.• Wide colour range.
Recommended use:
• Public toilets and private bathrooms.• Wall tiles with special chemical resistance.• Pools and damp environments.• Tile joints with uniform colour and shade, resistant to the passing of time.• High tra�c and outdoor �oors.• High adherence grouting material. Specially recommended. - Slate and natural stone. - Mesh backed glass mosaic.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Tiles with mosaic-like patterns. Please refer to PORCELANOSA /
VENIS catalogues.• Glass mosaic.• Natural stone and marble not prone to staining.
KEA SAPB42562016 100090692 anthraciteB42562017 100090693 beigeB42562020 100090694 whiteB42562018 100090695 cherry B42562019 100090696 grayB41061004 100116037 ivory
B35200002 100113684 epoxy cleaning kit
Presentation Europallet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet
Packaging
epotech aqua
kitchencountertops
bathroom environments
publictoilets
adhesiveepoxy
shower traysshowers
pools
Bath environments
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
Coverage
TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 11 lbs. (5 kg)
Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm)1" x 1" x 1/4" (25x25x6 mm) 14 (1) 7 (0,5) 4 (0,2)2" x 2" x 1/4" (50x50x6 mm) 28 (2) 14 (1) 8 (0,5)3" x 3" x 1/4" (75x75x6 mm) 41 (4) 21 (2) 12 (1)8" x 12" x 3/8" (200x316x10 mm) 81 (8) 41 (4) 24 (2)12" x 12" x 3/8" (316x316x10 mm) 105 (10) 52 (5) 31 (3)12" x 18" x 3/8" (316x446x10 mm) 123 (11) 61 (6) 37 (3)12" x 23" x 3/8" (316x596x10 mm) 137 (13) 68 (6) 41 (4)18" x 18" x 3/8" (446x446x10 mm) 148 (14) 74 (7) 44 (4)12" x 35" x 3/8" (316x900x10 mm) 155 (14) 78 (7) 46 (4)17" x 26" x 3/8" (435x659x10 mm) 174 (16) 87 (8) 52 (5)23" x 23" x 3/8" (596x596x10 mm) 198 (18) 99 (9) 59 (5)23" x 47" x 3/8" (596x1200x10 mm) 264 (24) 132 (12) 79 (7)32" x 32" x 3/8" (800x800x10 mm) 265 (25) 132 (12) 79 (7)7" x 26" x 3/8" (180x659x10 mm) 94 (9) 47 (4) 28 (2)8" x 47" x 1/4" (193x1200x10 mm) 110 (10) 55 (5) 33 (3)Mosaics 48 (4)
epotech crystal
Epoxy grouting materials
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
epotech crystal is an epoxy putty for grouting tile joints. Two-component putty with a translucent �nish. It re�ects the colour of the tile or mosaic surrounding the joint. It features all the properties of epoxy putties: watertightness, high resistance to chemicals and mechanical properties. Specially recommended for application on mosaics and ceramic tiles with relief. Extra �ne, micro grain porcelain grout.
This material is suitable for grouting joints up to 5 mm in �oor and wall tiles indoors. Excellent resistance to chemicals in high concentrations. Suitable for permanently damp environments.
epotech crystal
Features:
• Extra �ne, micro grain porcelain grout.• Easy to apply and clean epoxy putty.• Translucent appearance.• High resistance to most acids and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Prevents the development of fungi and bacteria.• Tile joints up to 5 mm.
Recommended use:
• Wall and �oor tiles with minimum joint.• Indoor �oor and wall tiles.• Mosaic or natural stone wall coverings.• Wall tiles and mosaics with glass elements.• Par-ker �oor coverings.• Technical, porcelain �oor coverings.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Wall tiles and mosaics with glass elements.• Natural stone and marble not prone to staining.
Before applying epotech crystal on any ceramic �oor not included in the list above, carry out a prior test or check with the Technical Department at butech.
KEA SAPB42562025 100126899 crystal
Presentation Packaging3 kg can 650 lb/palet
Packaging
epotech crystal
glassmosaic
recti�ed ceramic
Par-ker shower trays outdoors
Outdoor �oors
technical porcelain
tiles
TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 8 lbs. (6.6 kg)
Width x Length x Thickness 1/16" (1.5 mm)
3/32” (2.5 mm)
1/8" (3 mm)
3/16" (4.5 mm)
1" x 1" x 1/4" (25x25x6 mm) 23 (2) 14 (1) 11 (1) 7 (1)2" x 2" x 1/4" (50x50x6 mm) 45 (4) 27 (2) 23 (2) 14 (1)3" x 3" x 1/4" (75x75x6 mm) 68 (6) 41 (4) 34 (3) 23 (2)8" x 12" x 3/8" (200x316x10 mm) 134 (12) 80 (7) 67 (6) 44 (4)12" x 12" x 3/8" (316x316x10 mm) 173 (16) 103 (9) 87 (8) 58 (5)12" x 18" x 3/8" (316x446x10 mm) 203 (19) 122 (11) 102 (9) 68 (6)12" x 23" x 3/8" (316x596x10 mm) 226 (21) 136 (13) 113 (10) 75 (7)18" x 18" x 3/8" (446x446x10 mm) 245 (23) 146 (13) 122 (11) 82 (8)12" x 35" x 3/8" (316x900x10 mm) 257 (24) 162 (15) 128 (12) 85 (8)17" x 26" x 3/8" (435x659x10 mm) 287 (26) 172 (16) 144 (13) 96 (9)23" x 23" x 3/8" (596x596x10 mm) 327 (30) 195 (18) 164 (15) 109 (10)23" x 47" x 3/8" (596x1200x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)32" x 32" x 3/8" (800x800x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)7" x 26" x 3/8" (180x659x10 mm) 155 (14) 92 (8) 78 (7) 51 (5)8" x 47" x 1/4" (193x1200x10 mm) 182 (17) 109 (10) 91 (8) 60 (6)
Mosaics 39 (3)
76 77
EPOTECH
EPOTECH CRYSTAL GOLD AND SILVER
epotech
Epoxy grouting materials
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
epotech is an epoxy putty for grouting tile joints. Waterproof, two-component epoxy putty with outstanding chemical and mechanical properties. Specially recommended for tile joints requiring the highest mechanical and chemical properties.
This material is suitable for grouting joints from 3 to 15 mm · 1/8” to 5/8” in �oor and wall tiles, indoors and out. Excellent resistance to chemicals in high concentrations. Suitable for pools and permanently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic or natural stone.
epotech
Features:
• Two-component colored epoxy putty.• Excellent joint colour stability.• High resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Tile joints from 3 to 15 mm · 1/8” to 5/8” .
Recommended use:
• Wall tiles with special chemical resistance.• Chemical and food industry and premises subject to thorough cleaning.• Pools and permanently damp environments, Turkish baths and spas.• High tra�c and outdoor �oors.• High adherence grouting material. Specially recommended. - Slate and natural stone. - Mesh backed glass mosaic.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.
Presentation Europallet11 lb can 825 lb/palet11 lb can 825 lb/palet11 lb can 825 lb/palet11 lb can 825 lb/palet
Packaging
epotech
kitchencountertops
industrialkitchens
chemicalindustry
foodindustry
shower traysshowers
pools
Industries and laboratories
Certi�cations/Standards:
EN 13888 RG
KEA SAPB42562001 100004371 whiteB42562002 100004372 manhattanB42562005 100004373 anthraciteB42562009 100007815 ivory
B35200002 100113684 epoxy cleaning kit
Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.
Coverage
TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 11 lbs. (5 kg)
Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm)1" x 1" x 1/4" (25x25x6 mm) 14 (1) 7 (0,5) 4 (0,2)2" x 2" x 1/4" (50x50x6 mm) 28 (2) 14 (1) 8 (0,5)3" x 3" x 1/4" (75x75x6 mm) 41 (4) 21 (2) 12 (1)8" x 12" x 3/8" (200x316x10 mm) 81 (8) 41 (4) 24 (2)12" x 12" x 3/8" (316x316x10 mm) 105 (10) 52 (5) 31 (3)12" x 18" x 3/8" (316x446x10 mm) 123 (11) 61 (6) 37 (3)12" x 23" x 3/8" (316x596x10 mm) 137 (13) 68 (6) 41 (4)18" x 18" x 3/8" (446x446x10 mm) 148 (14) 74 (7) 44 (4)12" x 35" x 3/8" (316x900x10 mm) 155 (14) 78 (7) 46 (4)17" x 26" x 3/8" (435x659x10 mm) 174 (16) 87 (8) 52 (5)23" x 23" x 3/8" (596x596x10 mm) 198 (18) 99 (9) 59 (5)23" x 47" x 3/8" (596x1200x10 mm) 264 (24) 132 (12) 79 (7)32" x 32" x 3/8" (800x800x10 mm) 265 (25) 132 (12) 79 (7)7" x 26" x 3/8" (180x659x10 mm) 94 (9) 47 (4) 28 (2)8" x 47" x 1/4" (193x1200x10 mm) 110 (10) 55 (5) 33 (3)Mosaics 48 (4)
Certi�cations/Standards:
EN 13888 RG
epotech gold & silver
Epoxy grouting materials
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
epotech gold & silver is an epoxy putty for grouting tile joints. Two-component putty plus metal flakes featuring a unique, glossy finish. It features all the properties of epoxy putties: watertightness, high resistance to chemicals and mechanical properties. Specially recommended for application on mosaics and ceramic tiles with relief.
This material is suitable for grouting joints up to 5 mm in �oor and wall tiles indoors. Excellent resistance to chemicals in high concentrations. Suitable for permanently damp environments.
epotech gold & silver
Features:
• Two-component epoxy putty plus golden or silver metallic additive.• Easy to apply and clean. • High resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Prevents the development of fungi and bacteria.• Tile joints up to 5 mm.
Recommended use:
• Wall and �oor tiles with decorative, metallic �nish.• Indoor wall and �oor tiles.• Damp environments.• Tile joints with uniform colour and shade, resistant to the passing of time.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.
Before applying epotech gold & silver on metallic profiles or wall tiles with special glazes, carry out a prior test or check with the Technical Department at butech.
Bath environments
Packaging
epotech goldKEA SAPB42562021 100121692 gold
Presentation Europalet3 kg can 650 lb/palet
Packaging
epotech silverKEA SAPB42562022 100121693 silver
Presentation Europalet3 kg can 650 lb/palet
Glass mosaic Mosaic-like tiles Recti�ed ceramics
Special glazes Shower Trays Outdoors
TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 8 lbs. (6.6 kg)
Width x Length x Thickness 1/16" (1.5 mm)
3/32” (2.5 mm)
1/8" (3 mm)
3/16" (4.5 mm)
1" x 1" x 1/4" (25x25x6 mm) 23 (2) 14 (1) 11 (1) 7 (1)2" x 2" x 1/4" (50x50x6 mm) 45 (4) 27 (2) 23 (2) 14 (1)3" x 3" x 1/4" (75x75x6 mm) 68 (6) 41 (4) 34 (3) 23 (2)8" x 12" x 3/8" (200x316x10 mm) 134 (12) 80 (7) 67 (6) 44 (4)12" x 12" x 3/8" (316x316x10 mm) 173 (16) 103 (9) 87 (8) 58 (5)12" x 18" x 3/8" (316x446x10 mm) 203 (19) 122 (11) 102 (9) 68 (6)12" x 23" x 3/8" (316x596x10 mm) 226 (21) 136 (13) 113 (10) 75 (7)18" x 18" x 3/8" (446x446x10 mm) 245 (23) 146 (13) 122 (11) 82 (8)12" x 35" x 3/8" (316x900x10 mm) 257 (24) 162 (15) 128 (12) 85 (8)17" x 26" x 3/8" (435x659x10 mm) 287 (26) 172 (16) 144 (13) 96 (9)23" x 23" x 3/8" (596x596x10 mm) 327 (30) 195 (18) 164 (15) 109 (10)23" x 47" x 3/8" (596x1200x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)32" x 32" x 3/8" (800x800x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)7" x 26" x 3/8" (180x659x10 mm) 155 (14) 92 (8) 78 (7) 51 (5)8" x 47" x 1/4" (193x1200x10 mm) 182 (17) 109 (10) 91 (8) 60 (6)
Mosaics 39 (3)
78 79
ab
self-leveling spacers
Leveling system for ceramic tiles.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Leveling system for ceramic tiles. Eases ceramic tile laying and guarantees a perfectly �at surface of the �nal installation. The system consists of a new type of spacer with adjustable height that levels the surrounding tiles and prevents them from moving. Specially recommended when tile, design or use features demand a perfect �nish, with an even, seamless surface.
self-leveling spacers
Features:
• Guarantees tiles are even.• Prevents tiles from moving due to laying errors or due to mortar setting.• Reduces retouching and laying times.
• Suitable for 1,5-3 mm · 1/32” - 1/8” wide joints.• Suitable for tiles 5 to 16 mm · 3/16” to 5/8” thick.• The system consists of a spacer, a wedge and an adjusting tool.• Wedges are recoverable, only the spacers are consumed.
Recommended use:
• Wall and �oor tiles with minimum joint.• Large format �oor tiles.• Laying of recti�ed wall tiles.• Tiles with reduced thickness.• Interlocking �oor designs.• Glued façades.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• All wall tiles and similar products laid with cement-based adhesives.• Thickness between 5 and 15 mm.
KEA SAPB83511063 100108031 wedgeB83511062 100108032 wedgeB83511056 100095383 wedge
B83511059 100108026 1 mm spacerB83511058 100108027 1 mm spacerB83511065 100108028 1 mm spacer
B83511061 100108029 2 mm spacerB83511060 100108030 2 mm spacerB83511057 100095382 2 mm spacer
B83511067 100109070 3 mm spacerB83511066 100109071 3 mm spacerB83511070 100109072 3 mm spacer
B83511072 100123264 supplementary lift piece
KEA SAPB83511064 100108034 1 mm spacer system kitB83511069 100109073 2mm spacer system kitB83511068 100109074 3mm spacer system kit
KEA SAPB83510071 100095386 pincers for self-leveling spacer
Presentation100 units/bag300 units/bag500 units/bag
100 units/bag300 units/bag500 units/bag
100 units/bag300 units/bag500 units/bag
100 units/bag300 units/bag500 units/bag
50 units/bag
PresentationKitKitKit
PresentationUnit
Packagingself-leveling spacers
urbatek ston-ker parker largeformat
recti�edceramics
minimumjoint
Coverage:
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
acm inches
19.3 8 5031.6 12 40 33
33 13 50 29 2840 17 50 33 29 2544 18 44 30 25 22 20
59.6 23 37 25 21 19 17 1366 24 35 23 20 17 15 12 1180 32 34 23 20 17 15 11 11 990 35 31 20 17 15 14 10 9 8 7
100 39 30 20 17 15 13 10 9 8 7 6120 48 27 18 15 14 12 9 8 7 6 5 5
19.3 31.6 33 40 44 59.6 66 80 90 100 120 b (cm)8 12 13 17 18 23 24 32 35 39 48 b (inch.)
Large format �oors
80 81
Elastic joint sealants
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
S-107 n is a neutral silicone putty for sealing joints. Specially recommended for sealing movement joints. Indoor and outdoor use.,
This reticular putty in contact with dampness does not give o� odors, thus becoming an extraordinary elastic and resistant elastomer to atmospheric agents.
Features:
• Single-component neutral silicone.• High elasticity.• Good adherence.• Resistant to UV rays.• Frost-resistant.
Recommended use:
• Sealing joints even between materials sensible to chemical attack.• Sealing movement joints in �oors and walls.• Sealing joints in ceramics, glass, metal and plastics.• Sealing perimeter joints in wall tile coverings.• Gluing ceramic materials on wood boards.
Coverage:
• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Ceramic tiles and glass mosaic.• Glass.• Metal.• Plastic material, PVC.• Concrete slabs.• Wood.
KEA SAPB82302001 100005814 s-107 n blancoB82302002 100005815 s-107 n transparenteB82302003 100005816 s-107 n grisB82302004 100005817 s-107 n blackB82600026 100115950 s-107 n beige
Presentation Packaging300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box
Packaging
mortar ceramics glass metal movementjoint
outdoor
s-107
Elastic joint sealants
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
S-107 is an acetic silicone putty for sealing joints. Specially recommended for sealing joints in bathrooms and for sealing perimeter joints in wall tile coverings. Indoor use.
This reticular putty in contact with dampness gives o� acetic acid, thus becoming an extraordinary elastic and resistant elastomer to atmospheric agents.
s-107
Features:
• Single-component acetic silicone.• High elasticity.• Good adherence.• Resistant to UV rays.• Maximum application thickness, 30 mm.
Recommended use:
• Sealing joints in ceramics, glass, metal, plastics and painted surfaces.• Sealing perimeter joints in wall tile coverings.• Gluing ceramic materials on wood boards.
Coverage:
• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet• 8 x 6 mm · 5/16” x 1/4” joint 6.2 m · 20 feet
Substrates:
• Do not use on substrates which are sensible to the action of acids: - Screeds and �oors with cement mortar. - Concrete.
Materials:
• Ceramic tiles and glass mosaic.• Glass.• Plastic material.• Do not use with materials which are sensible to the action of acids, like marble or
other natural stones.
KEA SAPB82301004 100005811 s-107 blancoB82301005 100005812 s-107 transparenteB82301006 100005813 s-107 gris
Presentation Packaging300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box
Packagings-107
mortar ceramics glass metal jointjoint
outdoor
Elastic jointsElastic joints
s-107 n
s-107 n
s-107 n
Coverage(feet/cartridge) joint width (in) x joint depth (in)
1’5= Coverage
(feet/cartridge) joint width (in) x joint depth (in)
1’5=
82 83
p-404
Elastic joint sealants
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
p-404 is polyurethane putty for sealing joints. Specially recommended for sealing movement joints outdoors. Indoor and outdoor use.,
This reticular putty in contact with dampness does not give o� odors, thus becoming an extraordinary adherent, elastic and resistant elastomer to atmospheric agents.
p-404
Features:
• Single-component polyurethane putty.• High elasticity.• High adherence.• Resistant to UV rays.• Frost-resistant.
Recommended use:
• Sealing joints even between materials sensible to chemical attack.• Sealing movement joints in �oors and walls.• Bonding of building materials like ceramics, concrete, roof tiles, wood, alumi-
num, polyester or PVC.• Gluing ceramic materials on metal or wood boards.• Gluing Concept XPS panels.
Coverage:
• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet• 8 x 6 mm · 5/16” x 1/4” joint 6.2 m · 20 feet
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Ceramic tiles and glass mosaic.• Glass.• Metal.• Plastic material, PVC.• Concrete slabs.• Wood.• Concept XPS panels.
KEA SAPB82401001 100005818 p-404 blancoB82401002 100005819 p-404 grisB82401003 100005820 p-404 black
Presentation Packaging310 ml cartridge 25 cartridges x box310 ml cartridge 25 cartridges x box310 ml cartridge 25 cartridges x box
Packagingp-404
mortar ceramics glass metal jointjoint
outdoor
cl-stuk
Additive for grouting material
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
cl-stuk is a latex which mixed with cement-based grouts like colorstuk n, reduces water absorption and enhances mechanical resistance and deformability. Specially recommended when laying ceramic outdoors and in permanently damp environments.
A latex additive that can be mixed with the colorstuk range of high-tech grout mortars in cases when increased mechanical resistance, reduced water absorption or improved �exibility is required.
cl-stuk
Features:
• Water-based acrylic resins latex.• Resistant to the most common chemicals.• It reduces mortar water absorption.• It enhances the adherence and deformability of the grouting material.• It increases resistance to abrasion.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.
Recommended use:
Specially recommended in:• Outdoor �oor and wall tiles.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.It enhances grouting material performance in:• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
Specially recommended in:• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.It enhances grouting material performance in:• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.
KEA SAPB51201001 100004374 cl-stukB51501001 100004375 cl-stuk
Presentation Packaging2 kg can - 4.4 lb can 985.6 lb/palet5 kg can - 11 lb can 1056 lb/palet
Packagingcl-stuk
�oors glassmosaic
radiantheating
hightra�c
pools façades
Coverage:
Product % liters / galons Kg/bag - lb/bag
Colorstuk 0-4 n white 34% 1.6-1.8 / 0.35-0.39 5 - 11
Colorstuk 0-4 n white 34% 8.2 - 8.8 / 1.8 - 1.9 25 - 55
Colorstuk 0-4 n colour 26% 1.2 - 1.4 / 0.26 - 0.30 5 - 11
Colorstuk 0-4 n colour 26% 6.4 - 6.6 / 1.4 - 1.45 25 - 55
Colorstuk 2-12 n 20% 0.9 - 1.1 / 0.2 - 0.24 5 - 11
Colorstuk 2-12 n 20% 4.8 - 5.2 / 1.06 - 1.15 25 - 55
Colorstuk especial n 32.5% 0.65 / 0.14 2 - 4.4
Outdoor �oors
Elastic joints
Coverage(feet/cartridge) joint width (in) x joint depth (in)
1’5=
84
Mortar additiveunicem
Self-leveling mortarslevel 1 nlevel 1 prolevel 3
Primeruniprimsuper-prim
Cleaning productsacid netbasic gelacid net +acid net 1Lbasic gel 1Lporce-cleancolorstuk cleanerepotech cleanercolorstuk sealernon slip tile
86
878889
9091
92939494949595959696
Substrate preparationproducts
8786
unicem
Mortar additive
unicem is a latex that enhances the overall mechanical performance of cement-based mortars. Specially recommended for cement rendering, �oor screeds and other applica-tions in outdoor environments.
It guarantees increased waterproof protection, cohesion, reduced deformability and resistance to atmospheric agents of cement-based substrates. Recommended for intermediate bond coats between mortars.
unicem
Features:
• Water dispersion synthetic resins latex.• Excellent resistance to dampness.• Good deformability.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.
Recommended use:
• Outdoor wall and �oor tiles. Specially recommended in facades• Floor tiles on radiant heating.• High tra�c �oor tiles.• Pools and environments with a strong water presence.• Making of fully bonded screeds.
Substrates:
• Stable structures.
Certi�cations/Standards:
Materials:
• All wall tiles and similar products to be laid with cement-based adhesives.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
level 1 n
Self-leveling mortars
Features:
• Compressive strenght ≥ 30 N/mm2
• Flexural strenght ≥ 7 N/mm2
• Single-component, self-leveling mortar.• Excellent adherence. Flexible.• Application thickness between 2 and 10 mm.• Easy application with a straight edge trowel or scraper.• Indoor use.• Mixing water: 5,75 l per 23 kg bag
Recommended use:
• Substrate regularization in refurbishing jobs.• Indoor large format �oor tile coverings.• Indoor large format recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Floor tiles with radiant heating.
Priming:
• Cement-based substrate, previously apply uniprim.• Glazed ceramic tiles, previously apply super-prim.
Materials:
• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marbles.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
KEA SAPB51603002 100004378 unicemB51604002 100004379 unicem
Presentation Europallet5 kg can 1058 lb/palet20 kg can 1234 lb/palet
Packagingunicem
intermediatebond coat
�oor tileoutdoor
radiantheating
hightra�c
pools facades
Coverage:
Substrate Coverage
Mortar screed
• < 10 mm 150 gr/m2 and thickness millimeter
• 10-35 mm 50 gr/m2 and thickness millimeter
• > 35 mm 30 gr/m2 and thickness millimeter
Mortar rendering 70 gr/m2 and thickness millimeter
Bond coat 200 - 300 gr/m2
Facades
level 1 n is a fast hardening, self-leveling mortar for leveling and regularizing sub-strates for all kinds of floor tiles. 2 to 10 mm thickness. Specially recommended for laying ceramic �oor tiles with a minimal joint indoors.
It is formulated for creating 2 to 10 mm �oor substrates. It features good workability, fast-setting times, and a high mechanical performance. It allows to prepare �oors well levelled, for a correct and quick �xing of recti�ed ceramic tiles
Certi�cations/Standards:
EN 13813 CT C30-F7
Coverage:
Substrate Coverage
Self-leveling �oors 1,4 kg/m2 and thickness millimeter
Large format �oors
ston-ker largeformat
radiantheating
ceramicsceramics
ceramicsexisting
outdoor
level 1 n
KEA SAPB15901002 100048841 level 1 n
Presentation Europallet23 kg bag 2028 lb/palet
Packaginglevel 1 n
8988
level 1 pro
Self-leveling mortars
level 1 pro is a fast hardening, self-leveling mortar for leveling and regularizing substrates for all kinds of �oor tiles. 2 to 10 mm thickness. Specially recommended for laying recti�ed ceramic �oor tiles.
It is formulated for creating 2 to 10 mm �oor substrates. It features good workability, fast-setting times, and a high mechanical performance. It allows to prepare �oors well levelled, for a correct and quick �xing of recti�ed ceramic tiles
level 1 pro
Features:
• Single-component, self-leveling mortar.• Excellent adherence. • Fast hardening. Ready for tra�c in 4-5 hours.• Application thickness between 2 and 10 mm.• Easy application with a straight edge trowel or scraper. Pumpable.• Indoor use.• Mixing water. 6.0 l per 25 kg bag.
Recommended use:
• Substrate regularization in refurbishing jobs.• Indoor large format ceramic �oor tile coverings.• Indoor recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Laminate �oating �oors.• Synthetic �oors and carpet.• Do not use in outdoor �oors.
Primer:
• For cement-based, concrete or anhydrite substrates, �rst apply uniprim.• For existing ceramic substrates, �rst apply super-prim.
Certi�cations/Standards:
EN 13813 CT-C20-F5
Materials:
• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Natural stone and marble not prone to staining.• Laminate �oors and parquet.
Presentation Europallet25 kg bag 2200 lb/palet
Packaginglevel 1 pro
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Large format �oors
Self-leveling mortars
Features:
• Compressive strenght ≥ 25 N/mm2
• Flexural strenght ≥ 5 N/mm2
• Single-component, self-leveling mortar.• Excellent adherence. Flexible.• High �bre content.• Application thickness between 3 and 30 mm.• Easy application with a straight edge trowel or scraper.• Indoor use.• Mixing water: 4.25 – 4.50 l per 25 kg bag
Recommended use:
• Indoor large format �oor tile coverings.• Indoor large format recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Floor tiles with radiant heating.
Priming:
• Cement-based substrate, previously apply uniprim.• Glazed ceramic tiles and wood substrates, previously apply super-prim.
Materials:
• Large format �oor tiles.• Porcelain tiles (water absorption < 0.5% as per EN-ISO 10545-3).• Natural stone and marbles.•
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
level 3
level 3 is a fast hardening, self-leveling mortar with �bre for leveling and regularizing substrates for all kinds of �oor tiles. 3 to 30 mm thickness. Specially recommended for laying ceramic �oor tiles with a minimal joint indoors.
It is formulated for creating 3 to 30 mm �oor substrates. It features good workability, fast-setting times, and a high mechanical performance. It allows to prepare �oors well levelled, for a correct and quick �xing of recti�ed ceramic tiles
level 3
Certi�cations/Standards:
EN 13813 CT C25-F5
KEA SAPB15901004 100104577 level 3
KEA SAPB15901005 100141151 level 1 pro
Presentation Europallet25 kg bag 2200 lb/palet
Packaginglevel 3
Coverage:
Substrate Coverage
Self-leveling �oors 1,4 kg/m2 and thickness millimeter
Large format �oors
ston-ker largeformat
woodceramicsceramics
ceramicsexisting
outdoor
Coverage:Substrate Coverage
Self-leveling �oors 1.4 kg per m2 and thickness millimeter
ston-ker largeformat
radiantheating
ceramicsceramics
ceramicsexisting
outdoor
90 91
KEA SAPB52501001 100004384 uniprimB52601001 100004387 uniprim
Presentation Europallet5 kg can 1058 lb/pallet20 kg can 1234 lb/pallet
Packaginguniprim
Coverage:
Substrate Coverage
Anhydrite/plaster substrate 100 - 200 gr/m2
mortar concrete wood untiled �ooranhydrite
plasterboard
plasteredwall
Plaster substrates
uniprim
Primer
uniprim is a water-based primer made of synthetic resins for the insulation of plaster, anhydrite and molding plaster substrates, prior to the use of cement-based adhesives. It reduces water absorption and improves the consistency of cement-based substrates
C2-type cement-based adhesives can be used to lay ceramic tiles quickly and e�ciently on plaster, anhydrite and molding plaster substrates. It reduces the level of absorption of highly absorbent substrates, preventing cement-based adhesives from drying out too quickly and thus ensuring that they set properly. Priming prior to the application of self-leveling mortars on absorbent substrates, avoiding the appearance of bubbles or cracks because of a fast drying.
uniprim
Features:
• Water-based synthetic resins primer.• Once dry, it leaves a �lm over the substrate, which in plaster-based substrates
prevents contact and chemical reaction with cement-based adhesives. It prevents ettringite buildup.
• It reduces substrate water absorption.• It improves the bonding material setting time.• It increases cohesion of the substrate.• Easy application with a paint roller or a wide paintbrush.• Indoor and outdoor use.,
Recommended use:
• Wall tiles on plaster or molding plaster substrates.• Floor tiles on anhydrite substrates.• Ceramic tiles on cement-based substrates with weak consistency.• Reinforcement of self-leveling mortars.
Substrates:
• Plasterboards and plastered walls.• Anhydrite �oor coverings.• Cement-based substrates with high water absorption. • Plasterboards.• Untreated partition walls for laying tiles.
Materials:
• All wall tiles and similar products to be laid with cement-based adhesives.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
super-prim
Primer
superprim is a water-based acrylic resin primer with silica arids, used for preparing substrates prior to using adhesives, self-leveling mortars and mortar screeds. It reduces water absorption and improves the consistency of cement-based substrates. Professional use.
super-prim
Features:
• Water-based, acrylic resin latex with silica arids.• It enhances the adherence of cement mortars on glazed wall coverings.• It improves the bonding material setting time.• It reduces substrate water absorption.• It increases cohesion of the substrate.• Easy application with a paint roller or a wide paintbrush. Can be applied with
airless spray.• Indoor and outdoor use.• Do not dilute with water or mix with any other liquids.
Recommended use:
• Primer for self-leveling mortars on highly absorbent or existing ceramic tile coverings.
• Ceramic tiles on cement-based substrates with weak consistency or existing ceramic tile coverings.
• Ceramic floor coverings on anhydrite substrates or ceramic wall coverings on plaster or molding plaster.
• Mortar screeds on brick partition walls or concrete block walls.• Mortar screeds on ceramic tile or natural stone �oors.• Do not use in substrates subject to dampness increases.
Substrates:
• Ceramic brick partition walls.• Cement covered �oors and walls.• Concrete slabs and aerated concrete blocks.• Anhydrite-covered �oors and plastered walls.• Indoor ceramic �oor and wall tiles. • Indoor wood boards.• Indoor metal sheets.
Materials:
• All wall tiles and similar products to be laid with cement-based adhesives.
KEA SAPB57500002 100123220 super-prim
Presentation Europallet10 kg can 1058lb /pallet
Packaging
Primer for self-leveling mortars
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
mortar plaster or anhydrite
existing ceramics
wood metal self-leveling mortar
Coverage:
Substrate Coverage
Non absorbent 200 - 250 gr/m2
Absorbent 250-300 gr/m2
92 93
Certi�cations/Standards:
CAS No.: 1310-73-2Phrases: R-34 S2 , S26 , S36/37/39 , S45Danger symbols: C
KEA SAPB31201001 100004341 basic gelB31501001 100004346 basic gel
Presentation Europallet2 kg can 987 lb / palet5 kg can 1058 lb/ palet
Packagingbasic gel
*Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to alkali attack.
wall tile �oor tile �oor tileporcelain tile
glassmosaic
naturalmarble
specialglazes
Coverage:
Dilution
1 : 1 with clear water 85-100 gr/m2
1 : 2 with clear water 40-50 gr/m2
Floor etching
acid net
Cleaning products
acid net is an acid detergent for cleaning ceramic �oor and wall tiles. Specially recom-mended for cleaning building debris. Indoor and outdoor use.
It is an acid solution that in contact with cement reacts and removes dirt or stains with-out damaging coverings or cement based joints like colorstuk. Suitable for removing saltpetre remains or dirt sensible to acid attack.
acid net
Features:
• Acid solution.• Colorless liquid.• pH < 0.1• Viscosity: 5.0 - 8.0 cp at 20ºC• Recommended action time: 10-15 min.
Recommended use:
• Building site �nal cleaning.• Cleaning of remains of adhesives and cement-based grouting materials in �oor
and wall tiles.• Cleaning of e�orescences and salts remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.
Substrates:
• Do not apply directly on: -Cement covered �oors and walls . - Concrete slabs.
Certi�cations/Standards:
CAS No.: 7664-38-2Phrases: R-34 S2 , S26 , S36/37/39 , S45Danger symbols: C
Materials:
• Ceramic glazed and non-glazed tiles GLA, ULA.• Glass mosaic.• Natural stones resistant to acid descalers.• It is not recommended to use acid net in materials sensible to acid cleaners like: - Marbles and natural limestones. - Ceramic tiles with surface �nishes sensible to acid attack, like polished or metallic �nishes.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
basic gel
Cleaning products
basic gel is a concentrated alkaline detergent developed for cleaning ceramic tiles in general. Specially recommended for removing wax, varnish and other surface treat-ments. Indoor and outdoor use.
It is a basic pH remover, made from speci�c detergents ans alkaline agents that provide it with excellent proprieties for removing common dirt, without damaging coverings or cement based joints like colorstuk.
basic gel
Features:
• Alkaline solution.• Slightly red liquid.• pH > 12.5• Recommended action time: 10-15 min.
Recommended use:
• Regular cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .• Cleaning of glazed substrates prior to laying new tiles.
Substrates:
• All usual substrates for ceramic tiles laying.
Materials:
• Ceramic glazed and non-glazed tiles GLA, ULA.• Glass mosaic.• Natural stones resistant to alkaline detergents.• Stones without arti�cial treatment.Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to alkaline acids before using basic gel. In any case, we recommend to perform a preliminary test.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
*Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to acid attack.
KEA SAPB31202002 100004342 acid netB31502002 100004347 acid net
Presentation Europallet2 kg can 987 lb/ palet5 kg can 1058 lb/ palet
Packagingacid net
Coverage:
Dilution
1 : 1 with clear water 90-100 gr/m2
1 : 2 with clear water 45-50 gr/m2
1 : 3 with clear water 25-35 gr/m2
1 : 5 with clear water 20 gr/m2
wall tile �oor tile �oor tileporcelain tile
glassmosaic
natural specialglazes
Building site cleaning
94 95
Cleaning productsCleaning products
acid net + is a concentrated descaler for cleaning ceramic �oor and wall tiles. Specially recommended for cleaning building debris. Indoor and outdoor use.
Neutral detergent for cleaning ceramic and natural stone �oor coverings. High degreas-ing power for a deep and perfect cleaning. Fast drying. Indoor and outdoor use.
acid net is an acid detergent for cleaning ceramic floor and wall tiles. It dissolves all kinds or cement debris without damaging coverings or cement based joints like colorstuk.
Cleaner for cement based grouts. It removes dirt build-up and recovers the grout's orig-inal colour. Specially recommended for maintenance of joints sealed with colorstuk.
Concentrated alkaline detergent developed for cleaning ceramic tiles in general. terra-cotta and antiqued marble. It removes all kinds of oils, varnishes, paints, wax and home stains. Specially e�ective for etching former treatments.
Water-based detergent for cleaning epoxy putties remains and stains. Specially recom-mended for cleaning remains of epotech aqua. Professional use.
acid net + porce-clean
acid net 1L colorstuk cleaner
basic gel 1L epotech cleaner
Recommended use:
• Building site �nal cleaning.• Cleaning of remains of adhesives and cement-based grouting materials in �oor
and wall tiles.• Cleaning of e�orescences and salts remains.• Cleaning of plaster remains and plaster-based remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.
Recommended use:
• Regular cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .
Recommended use:
• Cleaning of remains of adhesives and cement-based grouting materials in �oor and wall tiles.
• Cleaning of e�orescences and salts remains.• Cleaning of plaster remains and plaster-based remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.
Recommended use:
• Cleaning of cement based joints stained with dust and dirt.• Recovering the colour in cement based tiling joints.
Recommended use:
• Intensive cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .• Cleaning of glazed substrates prior to laying new tiles.
Recommended use:
• Cleaning of epoxy putties remains and �lms on ceramic tiles, glass mosaics and natural stones.
Coverage:Dilution 1: 1 with clear water 10 ml/sqft
Dilution 1: 2 with clear water 5 ml/sqft
Coverage:10 l of clean water 10-20 ml/sqft
Coverage:Dilution 1: 1 with clear water 10 ml/sqft
Dilution 1: 2 with clear water 5 ml/sqft
Coverage for 2 mm joint.Tile 200 x 316 cm 215 sqft/packageTile 316 x 596 cm 350 sqft/packageTile 316 x 900 cm 395 sqft/packageTile 446 x 446 cm 375 sqft/packageTile 446 x 660 cm 450 sqft/packageTile 596 x 596 cm 200 sqft/package
Coverage:Dilution 1: 1 with clear water 10 ml/sqft
Dilution 1: 2 with clear water 5 ml/sqft
Coverage for 2 mm joint.Tile 200 x 316 cm 215 sqft/packageTile 200 x 446 cm 320 sqft/packageTile 316 x 596 cm 350 sqft/packageTile 316 x 900 cm 395 sqft/package
KEA SAP P/EU B35200004 100120424 acid net + 11.41 p/u
Presentation Box1000 ml bottle 12 bottles
Packagingacid net +
KEA SAP P/EUB35200003 100120423 acid net 9.51 p/u
Presentation Box1000 ml bottle 12 bottles
Packagingacid net 1L
KEA SAP P/EUB35200005 100120425 basic gel 1000 ml 11.33 p/u
Presentation Box1000 ml bottle 12 bottles
Packagingbasic gel 1L
KEA SAP P/EUB35200008 100120431 porce-clean 8.47 p/u
Presentation Box1000 ml bottle 12 bottles
Packagingporce-clean
KEA SAP P/EUB35200007 100120426 colorstuk cleaner 10.00 p/u
Presentation Box125 ml package 12 applicators
Packagingcolorstuk cleaner
KEA SAP P/EUB35200006 100120428 epotech cleaner 17.75 p/u
Presentation Box500 ml bottle 20 bottles
Packagingepotech cleaner
Before using any cleaning product, please perform a test or refer to the product's technical sheet.
*Given the wide variety of ceramic materials, glass mosaics and natural stones, we recommend to check with your tile provider about chemical resistance of the tiles before applying any cleaning product.
Before using any cleaning product, please perform a test or refer to the product's technical sheet.
*Given the wide variety of ceramic materials, glass mosaics and natural stones, we recommend to check with your tile provider about chemical resistance of the tiles before applying any cleaning product.
96 97
Glass mosaic Glazed ceramic tiles Porcelain
Remains of building work acid net + acid net + acid net +
Cement acid net acid net acid net
Gypsum acid net acid net acid net
Epoxy putty epotech cleaner epotech cleaner epotech cleaner
Remains of sillicone Vitroceramic scraper + Acetone
Vitroceramic scraper + Acetone
Vitroceramic scraper + Acetone
E�orescence acid net acid net acid net
Moss Bleach Bleach Bleach
Daily maintenance porce-clean porce-clean porce-clean
Food porce-clean porce-clean porce-clean
Co�ee, juices, sodas basic gel basic gel basic gel
Lemon, vinegar basic gel basic gel basic gel
Rust stains acid net acid net acid net
Urine and vomit acid net acid net acid net
Merbromin Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide
Iodine dye Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide
Blood stains Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide
Oil, fat basic gel basic gel basic gel
Motor oil basic gel basic gel basic gel
Tar Acetone Acetone Acetone
Paint, varnish, markers Acetone Acetone Acetone
Adhesive and glue Acetone Acetone Acetone
Rubber tires Acetone Acetone Acetone
Waterproo�ng joints colorstuk sealer colorstuk sealer colorstuk sealer
Joints cleaner colorstuk cleaner colorstuk cleaner colorstuk cleaner
Anti-slip non-slip tile
Given the wide range of mosaics and ceramics, it is recommended to consult the supplier of tiles about the chemical resistance. In any case, it is recommended to take a test.
We recommend the use on cleaning polished tiles, also with metal �nish. Contact the supplier of tiles to know the che-mical resistance. In any case, you have to take a test.
Cleaning products
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Cleaning products
Colorless, waterproof protector for cement based joints. It coats in depth and strength-ens the grout. It protects against water, oils and accidental spills. It eases the cleaning of joints as it reduces water absorption.
Non-slip treatment for glazed and unglazed ceramic tiles reducing the risk of slip and fall accidents. Indoor and outdoor use.
The non-slip treatment reacts with the ceramic tiles surface, generating thousands of microscopic bowls. These evenly distributed engravings increase the contact surface and, in the presence of water, produce a suction between the covering and the foot. This e�ect increases the coe�cient of friction and reduces the risk of slip and fall accidents.
colorstuk sealer
non-slip tile
Recommended use:
• Sealing and protection for cement based grouts.
Recommended use:
• Glazed and non-glazed ceramic �oor tile coverings. • Indoor and outdoor �oor tile coverings. • Built in shower trays.
• Do not apply on �bre shower trays and bathtubs.• Do not apply on materials which are sensible to acid attack, like limestones or
mortar substrates.
CoverageCeramic tile 20 ml/sqft
KEA SAP P/EUB87010002 100120427 colorstuk sealer 12.25 p/u
Presentation Box125 ml package 16 applicators
Packagingcolorstuk sealer
Coverage for 2 mm joint.Tile 200 x 316 cm 410 sqft/packageTile 316 x 596 cm 660 sqft/packageTile 316 x 900 cm 790 sqft/packageTile 446 x 446 cm 750 sqft/packageTile 446 x 660 cm 885 sqft/packageTile 596 x 596 cm 1000 sqft/package
KEA SAP P/EUB33601002 100120430 non slip tile 35.50 p/u
Presentation Box500 ml bottle 20 bottles
Packagingnon-slip tile
Before using any cleaning product, please perform a test or refer to the product's technical sheet.
*Given the wide variety of ceramic materials, glass mosaics and natural stones, we recommend to check with your tile provider about chemical resistance of the tiles before applying any cleaning product.
Waterproo�ngimperbandsylasticlinear drainsimperband USA kit
Decoupling and waterproo�nglamitech n
100101102104
106
Waterproo�ng
100 101
imperband
Waterproo�ng
imperband is a waterproof sheet, specially designed for indoor waterproofing of ceramic wall and �oor coverings.
It is a 0,5 mm · 3/64” thick polymer membrane with a double thermoplastic polyole�n sheet and covered on both sides by non woven polyester �bre that allow it to be bonded to surfaces using cement-based adhesives. Ideal for use in new construction and refur-bishment of showers and baths, and any indoor environment permanently a�ected by damp.
imperband
Features:
• Double thermoplastic polyole�n membrane covered on both sides by non woven polyester �bre.
• Maximum waterproo�ng with minimal thickness (0.5 mm - 3/64”).• Direct installation of the tile on the sheet.• Good chemical resistance.• Quick and easy application.
Recommended use:
• Private bathrooms. Built in showers.• Public toilets and showers.• Spas and premises in permanently damp environments.• Balconies and terraces smaller than 10 m2.• Do not use in outdoors surfaces greater than 10 m2.
Installation:
• imperband sheet is compatible with type C2 cement-based adhesive as per EN 12004.
• In case of surfaces bigger than the length of the sheet, overlap two 10 cm · 3/8”sheets and bond with C2 adhesive.
• In waterproo�ng of �oors, leave an excess of sheet of at least 10 cm · 3/8” in all the spots where �oor meets the wall.
• Be extremely cautious when connecting the sheet to the drainage systems. • Once the imperband sheet has been installed, cover with the chosen floor
covering. Never leave exposed to direct sunlight.
Substrates:
• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Plywood boards.• On anhydrite or plaster substrates apply uniprim.
Certi�cations/Standards:
TCNA A.118.10
Materials:
• Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorp-tion < 0.5% as per EN-ISO 10545-3.
• Glass mosaic.• Natural stone and marble not prone to staining.
KEA SAPB84901001 100006213 imperbandB84901006 100006218 imperband
Presentation Europallet322.92 sqft 7750 sqft/pallet53.81 sqft 3228.6 sqft/pallet
Packagingimperband
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Bath environments
bathenvironments
terraces new buildingwork
refurbishingbathrooms
ceramicshowers
pools
sylastic
Waterproo�ng
sylastic is a two-component cement-based waterproofer with excellent bonding and deformability features, specially recommended for waterproo�ng outdoors. Compatible with type C2 cement-based adhesive as per EN 12004. Indoor and outdoor use.
Prevents the need of screed between waterproofing sheet and ceramic floor, thus reducing the �nal system thickness. It is applied in two 1.5-2.5 mm · 1/16”-3/32” layers each, with a �berglass mesh reinforcement on the �rst application. Special pieces and bands available for waterproo�ng joints and other critical spots.
sylastic
Features:
• Two-component waterproo�ng mortar.• Indoor and outdoor waterproofer.• Maximum waterproo�ng with minimal thickness (3 mm).• It allows for direct laying of ceramic tiles with cement-based adhesive.• Excellent adherence and maximum deformability.• Good chemical resistance.• Suitable for direct contact with water.
Recommended use:
• Waterproo�ng of bathrooms and showers.• Spas and premises in permanently damp environments.• Outdoor terraces and balconies.• Pools and premises into direct contact with water.• Cisterns and reservoirs into direct contact with water.• Repair of cracked �oors and renderings.• Promotes adherence on existing ceramic wall tiles and on wood or metal sub-
strates.
Coverage:
Substrates:
• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Wood boards.• Existing �oor tiles.• Metal sheets.
Materials:
• Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorp-tion < 0.5% as per EN-ISO 10545-3.
• Glass mosaic.• Natural stone and marble not prone to staining.
KEA SAPB85900004 100072729 sylastic mortarB85900005 100072730 sylastic additive
B84900303 100006212 50 m �berglass mesh
B84905004 100006221 50 ml waterproof band
B84900101 100006210 outer angleB84900202 100006211 inner angle
sylasticPresentation Europallet
52.9 lb bag 2116 lb/palet17.6 lb can 704 lb/palet
538 sqft reel
164 feet roll
UnitUnit
Packaging
Bond coat:• One-layer application. 2,60 kg / m2 · 0.55 lb/sqft• Sylastic mortar 1,95 Kg / m2 · 0.40 lb/sqft• Sylastic additive 0,65 Kg / m2 · 0.14 lb/sqft
Waterproo�ng:• Two-layer application. 5,20 kg / m2 · 1 lb/sqft• Sylastic mortar 3,90 Kg / m2 · 0.80 lb/sqft• Sylastic additive 1,30 Kg / m2 · 0.27 lb/sqft
Mean thickness per sylastic layer: 1.5 mm
Pools
bathenvironments
terraces new buildingwork
refurbishingbathrooms
ceramicshowers
pools
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
102 103
linear drains
Waterproo�ng
The linear drains from butech in AISI 304 stainless steel and polypropylene are an excellent solution for shower trays with ceramic tiles, natural stone or mosaic covering. These new design drains available in two sizes and in three di�erent steel gratings, are an excellent complement for the PORCELANOSA Grupo bathroom settings.
These drains consist of a sewer, u-bend and decorative grating, and feature a wide ledge on which to glue the imperband waterproof sheet. Available for laying close to the wall and in the center of the shower, they help to solve easily and e�ectively indoor waterproo�ng and drainage.
linear drains
Linear wall drain features:
• Includes side piece for �xing to wall.• Asymmetric �nish frame for trim against wall.• 135 mm · 5,31 in high drain.• Discharge speed. 0.8 l/s.• 50 mm · 1.97 in horizontal outlet.• 150 mm · 5.91 in diameter crown for imperband �xation.• Includes u-bend.
Linear grating features:
• AISI 304 stainless steel grating• Adjustable height; adaptable to the height of the shower wall covering.• Available in 700 and 900 mm · 27.56 in and 35.43 in• Steel and ceramic gratings can be installed with or without steel frame.• 26.5 cm · 10.43 in. diameter crown for imperband �xation.• Includes u-bend. Linear drain standard grating: steel grating with traditional design. Linear drain steel grating: steel grating with functional design. LIFESTYLE �nish. Linear drain ceramic grating: Special grating for bonding the same ceramics or mosaic than the rest of the built in shower.
Linear central drain features:
• Includes 4 regular height legs.• Asymmetric frame for trim against wall.• 140 mm · 5.51 in high drain.• Discharge speed. 0.8 l/s.• 50 mm · 1.97 in horizontal outlet.• 208 mm · 8.18 in diameter crown for imperband �xation.• Includes u-bend.
Recommended use:
• Specially designed drain for waterproo�ng built in showers.• Compatible with imperband waterproo�ng sheet.• Horizontal outlet.
Ceramic showers
indoor outdoor new buildingwork
refurbishingbathrooms
ceramicshowers
Concept XPS shower tray.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Waterproo�ng
KEA SAPB82902027 100090862 700 mmB82902026 100090863 900 mm
KEA SAPB82902017 100078229 700 mmB82902022 100090864 900 mm
linear central drain
linear wall drain
central grating
wall grating
Presentation1 u./box1 u./box
Presentation1 u./box1 u./box
Packaging
Packaging
Packaging
Packaging
KEA SAPB82902032 100091722 700 mm standardB82902028 100091723 900 mm standard
B82902029 100091718 700 mm steelB82902030 100091719 900mm steel
B82902033 100091720 700 mm ceramicsB82902031 100091721 900 mm ceramics
KEA SAPB82902019 100078231 700 mm standardB82902023 100090866 900 mm standard
B82902018 100078230 700 mm steelB82902024 100090867 900 mm steel
B82902016 100078228 700 mm ceramicsB82902025 100090868 900 mm ceramics
Presentation1 u./box1 u./box
1 u./box1 u./box
1 u./box1 u./box
Presentation1 u./box1 u./box
1 u./box1 u./box
1 u./box1 u./box
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
104 105
imperband USA kit
Waterproo�ng
The standard imperband kit is an indoor waterproo�ng system consisting of a PVC gutter thermowelded to a 150 x 225 cm waterproof sheet. Specially recommended for waterproo�ng shower trays in new building works. Residential use.
The waterproof sheet is an imperband type 0,5 mm thick polymer membrane with a double thermoplastic polyolefin sheet and covered on both sides by non woven polyester �bre that allow it to be bonded to surfaces using cement-based adhesives. The gutter features a compact design and multiple possibilities of outlet connections.
imperband USA kit
Features:
• Maximum security, it eliminates leakage risks between waterproof sheet and drain piece.
• 150 x 225 cm · 59” x 88.6” waterproof sheet.• Discharge speed. 0.5 l/s.• Compact system, just 100 mm · 3.94” high.• Includes u-bend.• Direct installation of the tile on the waterproof sheet.• Quick and easy application.
Recommended use:
• Specially designed for waterproo�ng built in showers.
Installation:
• Depending on the drainage pipe position, select one of the system outlets and seal the other outlet with the cap provided to that e�ect.
• Given the case, use the drain outlet diameter adapter and glue the drainage pipe.• Before laying the ceramics of the shower tray, check that the gutter works
correctly.• Use the waterproof sheet in the same way as the imperband sheet.
Substrates:
• Cement covered �oors.• Specially designed for Concept XPS shower trays, prefabricated polystyrene
panels.
Materials:
• Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorp-tion < 0.5% as per EN-ISO 10545-3.
• Glass mosaic.• Natural stone.
KEA SAPB82902053 100110215 1.5 x 2.25 m standard
Presentation1 kit/box
Packagingimperband USA kit
indoor outdoor new buildingwork
refurbishingbathrooms
ceramicshowers
Concept XPS shower tray.
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
Ceramic showers
Waterproo�ng
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
square grids
KEA SAPB82902021 100089372 squaredB82902056 100114593 sun
KEA SAPB82902044 100103364 1200 x 93 mmB82902045 100103365 596 x 93 mmB82902042 100103366 800 x 93 mm
KEA SAPB82902047 100103367 1200 x 93 mmB82902036 100103368 596 x 93 mmB82902048 100103369 800 x 93 mm
KEA SAPB82902035 100103370 1200 x 93 mmB82902041 100103371 596 x 93 mmB82902039 100103372 800 x 93 mm
KEA SAPB82902043 100103373 1200 x 93 mmB82902046 100103374 596 x 93 mmB82902040 100103375 800 x 93 mm
Presentation1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Packaging
Packaging
Packaging
Packaging
Packaging
standard
chrome texture
texture
squared
line
squared sun
linear grids
KEA SAPB82902072 100130481 596 x 93 mmB82902073 100130482 800 x 93 mm
KEA SAPB90200676 100119619 1200 x 93 mmB90200674 100119620 596 x 93 mmB90200675 100119621 800 x 93 mm
KEA SAPB82902067 100120375 1200 x 93 mmB82902065 100120376 596 x 93 mmB82902066 100120377 800 x 93 mm
KEA SAPB82902078 100141155 1200 x 93 mmB82902079 100141156 596 x 93 mmB82902081 100141157 800 x 93 mm
KEA SAPB82902077 100141152 1200 x 93 mmB82902076 100141153 596 x 93 mmB82902080 100141154 800 x 93 mm
Presentation1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Presentation1 grating/box1 grating/box1 grating/box
Packaging
Packaging
Packaging
Packaging
Packaging
gold
ceramic
white
glass white
glass black
106 107
Decoupling and waterproo�ng
lamitech n is a multilayer polymer sheet, specially designed for outdoor �oors decou-pling. Protects tiles against substrate tensions, reducing the risk of breakage and piece lifting. Suitable for outdoor waterproo�ng.
Coextruded HDPE/EVAC membrane, with one side covered with polyester fibre and the other one with polyester entwined felt, that allows laying with cement-based adhesives. Absorbs tensions, reducing their transmission to the ceramic �oor. Indoor and outdoor use.
Features:
• Multilayer HDPE/EVAC polymer membrane covered with polyester �bre.• Maximum outdoors waterproo�ng with minimal thickness (3,4 mm · 0.133”).• It allows for direct laying of ceramic tiles with cement-based adhesive.• Good chemical resistance.• Improves impact noise reduction.• Quick and easy application.
Recommended use:
• Decoupling of balconies and terraces.• Waterproo�ng of outdoor �oors.• Laying of ceramics on wood substrates.• Laying of �oor tiles on cracked substrates. Terrace refurbishing.• Laying of ceramics on substrates which are not set yet or present residual damp.
Installation:
• lamitech n sheet is compatible with type C2 cement-based adhesive as per EN 12004.
• In case of surfaces bigger than the length of the sheet, put tha sheets together, cover the joint with lami-band 200 and glue with C2 adhesive.
• In waterproo�ng of �oors, lengthen the waterproo�ng with lami-band 200 at least 10 cm in all the spots where �oor meets the wall.
• In movement joints, use �exible tape waterproof band.• Be extremely cautious when connecting the sheet to the drainage systems.• Once lamitech n has been installed, cover with the desired covering. Never leave
exposed to direct sunlight.
Certi�cation:
• TCNA
Substrates:
• Cement or anhydrite covered �oors.• Concrete slabs.• Existing �oor tiles.• Plywood boards.
Materials:
• Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorp-tion < 0.5% as per EN-ISO 10545-3.
• Glass mosaic.• Natural stone and marble not prone to staining.
KEA SAPB89500011 100089879 lamitech n
B84901005 100006217 200 mm lami-bandB84905004 100006221 waterproof band
B85900004 100072729 sylastic morteroB85900005 100072730 sylastic aditivo
Presentation Europallet5 m · 53.81 sqft reel 200 m2/pallet
30 m · 322.91 sqft reel50 m · 164 sqft roll
UnitUnit
Packaging
Terraces
bathenvironments
terraces anti-cracks refurbishing ceramicshowers
pools
Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.
lamitech n
lamitech n
lamitech n
108
Raised acces �ooringRaised acces �ooring
Raised acces �ooring for exteriorsRaised acces �ooring for exteriors
Cli-ker nCli-ker n
Cli-ker n exteriorsCli-ker n exteriors
110
116
122
128
Raised �oors
110 111
Technical �oors
Raised Access Flooring o�cesThe RAF system from butech is a type of raised technical �ooring for projects where you need easy access to the services housed beneath the �oor and also an easy and quick piece replacement. Indoor use.
This type of �ooring consists of a panel with ceramic covering and a galvanized steel frame.
Concentrated load at center of side of the panel (1 mm de�ection)
• With MEDIUM type stringer structure: 0.9 kN
• With no stringer structure: 0.8 kN
Concentrated load at center of the panel (1 mm de�ection):
• With MEDIUM type stringer structure: 1.9kN
• With no crosspiece structure: 1.8kN
Uniformly distributed static load (1 mm de�ection):
• With MEDIUM type stringer structure: 8.0 kN/m2
• With no crosspiece structure: 7.0 kN/m2
Concentrated load at center of side of the panel (1 mm de�ection)
• With MEDIUM type stringer structure: 1.6 kN
• With no stringer structure: 1.4 kN
Concentrated load at center of the panel (1 mm de�ection):
• With MEDIUM type stringer structure: 2.6kN
• With no stringer structure: 2.4kN
Uniformly distributed static load (1 mm de�ection):
• With MEDIUM type stringer structure: 11.0 kN/m2
• With no stringer structure: 10.0 kN/m2
Raised access �ooring panels:
The boards can be of two types: high density chipboard and calcium sulfate.
Chipboard core panels:
The RAF 38 M panels consist of a porcelain tile on a high density chipboard core (650 kg/m3), 0,15 mm - 0,006 inches thick aluminum foil lower covering and 1 mm thick perimeter edge in black ABS. The piece dimensions are 598x598x50 mm - 234/16 x 234/16x1,969 inches
The technical features of the 38 M, according to EN 12825, are:Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.
Raised access �ooring structure.
The whole structure is made of galvanized steel, with no aluminum parts to meet �re protection standards. It consists of pedestals and optional reinforcement stringers.
• Pedestals are the system support, on which RAF panels are laid, and determine the �ooring height. For a better �tting of the RAF piece, a semi-rigid plastic joint is installed. Pedestals are bonded to the substrate with polyurethane putty.
• Medium stringers with longitudinal nerves have an open section and are designed to improve the RAF mechanical resistance and to ease piece replacement. The stringers are screwed to pedestals to improve the system stability and resistance.
For further information, refer to the technical sheet.
Calcium sulfate core panels:
The RAF 30 S panels consist of a porcelain tile on a high density chipboard core (1450 kg/m3), 0,5 mm - 0,010 inches thick aluminum foil lower covering and 1 mm thick perimeter edge in black ABS. The piece dimensions are 598x598x40 mm - 1ft 1135/64” x 1ft 1135/64” x 1,575 inches.
The technical features of the 30 S, according to EN 12825, are:
Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.
Raised access �ooring
Floor tile section
Pedestals Stringers
Floor tile section
112 113
SHADING SHADING
Ferroker
Ceilán
Blueker
Ferroker Níquel234/16” x 234/16” B113
Ferroker Platino234/16” x 234/16” B113
Microcemento Blanco234/16” x 234/16” B80
Cemento Arena234/16” x 234/16” B80
STON-KER RECTIF. MATT-GLOSS
Ferroker234/16” x 234/16” B113
Microcemento Gris234/16” x 234/16” B80
Blueker 234/16” x 234/16” B80
Cemento Manhattan234/16” x 234/16” B80
Ferroker Aluminio234/16” x 234/16” B113
Microcemento Silver234/16” x 234/16” B80
Blueker Acero234/16” x 234/16” B80
Cemento Silver234/16” x 234/16” B80
Ferroker Titanio234/16” x 234/16” B113
Cemento
Raised access �ooring Ceramic tiles for RAF
STON-KER RECTIF. SHADING MATT
STON-KER RECTIF. SHADING MATT
STON-KER RECTIF. SHADING MATT
STON-KER RECTIF. SHADING MATT
Ceilán Ivory234/16” x 234/16” B80
Microcemento
Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek. Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.
114 115
Raised access �ooring
City
Town
RECTIF.
RECTIF.
City Cube234/16” x 234/16” Polished B113
234/16” x 234/16” Nature B452
Town White234/16” x 234/16” Polished B486
234/16” x 234/16” Nature B456
Town Black234/16” x 234/16” Polished B457
234/16” x 234/16” Nature B453
City Studio234/16” x 234/16” Polished B113
234/16” x 234/16” Nature B452
Town Acero234/16” x 234/16” Polished B456
234/16” x 234/16” Nature B452
Town Niquel234/16” x 234/16” Polished B456
234/16” x 234/16” Nature B452
City Graphic234/16” x 234/16” Polished B113
234/16” x 234/16” Nature B452
Town Arena234/16” x 234/16” Polished B456
234/16” x 234/16” Nature B452
Town Moka234/16” x 234/16” Polished B456
234/16” x 234/16” Nature B452
Ceramic tiles for RAF
Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek. Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.
116 117
Technical �oors
Raised Access Flooring exteriorThe outdoor RAF system from butech is a type of raised �ooring for projects where you need to cover outdoor sloping substrates with a �at surface. Outdoor use.This type of �ooring consists of a panel with ceramic covering and adjustable height pedestals.
Raised access �ooring panels:
Outdoor RAF panels are made from two porcelain tile pieces chemically glued. This type of panel features no water absorption and high breaking strength: up to 9.8 kN. Available in all anti-slip STON KER, PAR KER and URBATEK models. Format and thickness of each panel depends on the chosen tile from PORCELANOSA Grupo, the usual thickness being 24 mm.
Raised access �ooring for exterior
Raised access �ooring structure.
Pedestals are made of weatherproof plastic. They determine the height and the width of the open joint between panels. 4 mm. They adapt to the substrate's slopes thanks to their sloping base. There are two types of pedestals:
• Stackable. 10 to 15 mm - 25/64 to 19/32 inches height.• Adjustable height from 50 mm to 490 mm - 131/32 to 199/32 inches.
Pedestals are bonded to the substrate with p-404 polyurethane putty.
This type of raised �ooring produces �at surfaces which outdoors prevent water draina-ge and this results in a minimum water buildup on the ceramic tiles.For further information, refer to the technical sheet.
Plots
SAP KEA DESCRIPTION REGULATION mm REGULATION inch100005802 B80305010 Basic Plot 10 10 25/64100005803 B80305011 Basic Plot 15 15 19/32100005804 B80305020 Normal plots 50/70 50 - 70 131/32 - 23/4
100005805 B80305021 Normal plots 70/100 70 - 100 23/4 - 315/16
100005794 B80305001 Ultra plots 65/100 65 - 100 29/16 - 315/16
100005797 B80305004 Ultra plots 100/130 100 - 130 315/16 - 51/8
100005796 B80305003 Ultra plots 130/220 130 - 220 51/8 - 821/32
100005798 B80305005 Ultra plots 220/310 220 - 310 821/32 - 123/4
100005799 B80305006 Ultra plots 310/400 310 - 400 123/4 - 153/4
100005800 B80305007 Ultra plots 400/490 400 - 490 153/4 - 199/32
100005801 B80305008 Ultra plots 490/580 490 - 580 199/32 - 2213/16
118 119
Arizona
Jatoba
Aston
Aston Silver234/16” x 234/16” B80
Aston Antracita234/16” x 234/16” B80
Aston Acero234/16” x 234/16” B80
Jatoba Olivo78/16”x474/16 B110
Jatoba Rojo78/16”x474/16 B110
Jatoba Wengé78/16”x474/16 B110
Aston Arena234/16” x 234/16” B80
Aston Caliza234/16” x 234/16” B80
Arizona Antracita1615/16”x259/16” B79
Arizona Caliza1615/16”x259/16” B79
Arizona Stone1615/16”x259/16” B79
Arizona Arena1615/16”x259/16” B79
Raised access �ooring for exterior Ceramic tiles for outdoor RAF
STON-KER RECTIF. SHADING MATT STON-KER RECTIF. SHADING MATT
RECTIF. SHADING MATT
Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles. Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles.
120 121
Neo
Avenue
Neo Black2310/16”x2310/16” Texture B455
2310/16”x1113/16” Texture B454
Avenue Gray2310/16”x2310/16” Texture B456
2310/16”x1113/16” Texture B454
Carpatia
Tavola
Carpatia Gris175/16”x2516/16” B113
Carpatia Black175/16”x2516/16” B113
Tavola Foresta8 5/8 “ x 35 3/8 ” B122
5 5/8 “ x 35 3/8 ” B122
7 5/8 “ x 47 1/4 ” B100
Tavola Mogano7 5/8 “ x 47 1/4 ” B100
Tavola Rovere7 5/8 “ x 47 1/4 ” B100
Tavola Kenya7 5/8 “ x 47 1/4 ” B100
Tavola Natura7 5/8 “ x 47 1/4 ” B100
Tavola Grigio7 5/8 “ x 47 1/4 ” B100
8 5/8 “ x 26” B115
Raised access �ooring for exterior Ceramic tiles for outdoor RAF
STON-KER RECTIF. SHADING MATT
RECTIF. SHADING MATT
RECTIF.
RECTIF.
Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles. Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles.
122 123
Cli-ker nTechnical �oors
CLI-KER n system from butech is a type of removable �oor covering for dry installation on leveled substrates. It is installed without the need of adhesives. Indoor use.
The CLI-KER n pieces consist of a porcelain tile from PORCELANOSA Grupo, on top, and a plastic layer that acts as a base and bears the joints on the sides of the tile. The pieces are pressed in a mold, and have a 234/16”x234/16” format, with a 16 mm thickness.
Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.
Installation is carried out with binding elements that join the pieces mechanically and reversibly, so the system is easy to install and to remove. We recommend to install the �oor on a 1,3 mm - 0,051 inches thick and 390gr/m2 latex foam sheet laid directly on the leveled substrate.
This system includes:
• Tie for 4 pieces. Height: 5 mm - 0,197 inches.• Base for trimming. Height: 5 mm - 0,197 inches.• Height raisers. Available in 0.5 and 1 mm - 0,0197 and 0,0394 inches heights.• Acoustic foam sheet.• Cintex, sealing band for the leveling sheet.
For further information, refer to the technical sheet.
SAP KEA DESCRIPTION
100096030 B81200209 Compensation piece 0,5mm - 0,0197 inches
100096031 B81200207 Compensation piece 1mm - 0,0394 inches
100096038 B81200208 Plug 5mm - 0,197 inches
100102785 B81200228 Catches 5mm - 0,197 inches
100103280 B15901003 Levelling sheet (9mt2)
Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek. Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.
124 125
DESTONIF DESTONIF
Ferroker
Microcemento
Ceilán
Blueker
Ferroker Níquel234/16”x234/16” B113
Ferroker Platino234/16”x234/16” B113
Microcemento Blanco234/16”x234/16” B80
Cemento Arena234/16”x234/16” B80
Ferroker234/16”x234/16” B113
Microcemento Gris234/16”x234/16” B80
Ceilán Ivory234/16”x234/16” B80
234/16”x234/16” B80
Cemento Manhattan234/16”x234/16” B80
Aluminio234/16”x234/16” B113
Microcemento Silver234/16”x234/16” B80
Blueker Acero234/16”x234/16” B80
Cemento Silver234/16”x234/16” B80
Ferroker Titanio234/16”x234/16” B113
Cemento
Cli-ker n
STON-KER RECTIF. MATT-GLOSS
Ceramic tiles for Cli-ker n
STON-KER RECTIF. SHADING MATT
STON-KER RECTIF. SHADING MATT
STON-KER RECTIF. SHADING MATT
Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek. Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.
126 127
City
Town
City Cube234/16”x234/16” Polished B113
234/16”x234/16” Nature B452
Town White234/16”x234/16” Polished B486
234/16”x234/16” Nature B456
Town Black234/16”x234/16” Polished B457
234/16”x234/16” Nature B453
City Studio234/16”x234/16” Polished B113
234/16”x234/16” Nature B452
Town Acero234/16”x234/16” Polished B456
234/16”x234/16” Nature B452
Town Niquel234/16”x234/16” Polished B456
234/16”x234/16” Nature B452
City Graphic234/16”x234/16” Polished B113
234/16”x234/16” Nature B452
Town Arena234/16”x234/16” Polished B456
234/16”x234/16” Nature B452
Town Moka234/16”x234/16” Polished B456
234/16”x234/16” Nature B452
Cli-ker n Cli-ker n
RECTIF.
RECTIF.
Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.
128 129
Arizona
Arizona Antracita175/16”x175/16” B57
Arizona Caliza175/16”x175/16” B57
Technical �oors
CLI-KER n ext system from butech is a type of removable �oor covering for dry installa-tion on leveled substrates. It is installed without the need of adhesives. Outdoor use.
TheCLI-KER ext pieces consist of a porcelain tile from PORCELANOSA Grupo, on top, and a plastic layer that acts as a base and bears the joints on the sides of the tile. The pieces are pressed in a mold, and have a 175/16”x175/16” format, with a 16 mm - 0,63 inches thickness.
The CLI-KER ext system reproduces the substrate's slopes like an outdoor traditional �oor covering, but leaving 4 mm - 0,1574 inches wide open joints for water drainage. Installation is carried out with binding elements that join the pieces mechanically and reversibly.
This �oor covering system reduces the risks of the e�ects of frost on outdoor ceramic �oor coverings, and eases their installation and removal too.For further information, refer to the technical sheet.
Cli-ker n exterior
Ceramic tiles for Cli-ker n exterior
STON-KER RECTIF. SHADING MATT
SAP KEA DESCRIPTION
100096030 B81200209 Compensation piece - 0,5mm 0,0197 inches
100096031 B81200207 Compensation piece 1mm - 0,0394 inches
100104688 B81200234 Plug 10 mm - 25/64 inches
100104533 B81200233 Catches 10 mm - 25/64 inches
100106922 B78141125 Finishing pro�le
130 131
Eligible
Product family
Product name
Product name
Product name
Kilograms per pallet
Product picture
Type of packaging for the product
Types of substrates where the use of the product is recommended
Types of materials where the use of the product is recommended
Types of applications where the use of the product is recommended
Symbols for types of substrates
Image of a possible use of the product
Product features
Product coverage
Product certi�cations and standards
Mixed withcl-stuk
Non-eligible
Key
butech building technology, s.a.Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2.5 · PO Box 297 · 12540 Villarreal, Castellón - SPAIN.
Telephone (+34) 964 53 62 00 · Fax: (+34) 964 53 00 34 · E-mail: [email protected] · www.butech.es
1213
CALIFORNIA COLORADO CONNECTICUT FLORIDA GEORGIA ILLINOIS MARYLAND MASSACHUSETTS NEW JERSEY NEW YORK
PENNSYLVANIA TEXAS CANADA
www.porcelanosa-usa.comwww.butech.es