Top Banner
33mm 108mm TLPDXXX Tradetec Prime Downlight 77mm - 92mm 77-92mm Martec Pty Ltd 6 Austool Pl | Ingleburn, NSW 2565 P: 02 8778 7500 F: 02 8778 7555 E: [email protected] Thermal insulaon clearance class-IC covered; meaning that the Prime LED down light can be covered enrely by insulaon Building insulaon abung or is within 100mm horizontally of the luminaire must meet the following requirements: Be of a type that can maintain its dimensions and structural integrity when exposed to a maximum surface temperature of the class of the luminaire, being 90⁰C; Be of a type that can withstand a 30 second needle flame test carried out in accordance with AS/NZS 60695.11.5 with a flame applied to all surfaces of the sample Insulaon types which should be used with this fing are glass wool (Pink Bas) & polyester The Prime down light can be dimmed to 10%. Martec LED down lights are compable and supported with the Martec MTD300VA dimmer. All other dimmers may work, but are not supported by Martec.
1

Prime Instruction Manual - Martec€¦ · The Prime down light can be dimmed to 10%. Martec LED down lights are compatible and supported with the Martec MTD300VA dimmer. All other

Apr 30, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Prime Instruction Manual - Martec€¦ · The Prime down light can be dimmed to 10%. Martec LED down lights are compatible and supported with the Martec MTD300VA dimmer. All other

33m

m

108mm

TLPDXXX

Tradetec Prime Downlight

77mm - 92mm

77-92mm

Martec Pty Ltd6 Austool Pl | Ingleburn, NSW 2565 P: 02 8778 7500F: 02 8778 7555E: [email protected]

Thermal insulation clearance class-IC covered; meaning that thePrime LED down light can be covered entirely by insulationBuilding insulation abutting or is within 100mm horizontally of the luminaire must meet the following requirements: Be of atype that can maintain its dimensions and structural integritywhen exposed to a maximum surface temperature of the class ofthe luminaire, being 90⁰C; Be of a type that can withstand a 30second needle flame test carried out in accordance with AS/NZS60695.11.5 with a flame applied to all surfaces of the sampleInsulation types which should be used with this fitting are glasswool (Pink Batts) & polyester

The Prime down light can be dimmed to 10%.

Martec LED down lights are compatible and supported with the MartecMTD300VA dimmer.

All other dimmers may work, but are not supported by Martec.