SEQ. #416-1216 MINNESOTA PRICING PAGES (Typed Responses Required) December 2016 Aftermarket Tractor/Skidsteer Attachments Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: 1.0 Manufacturer's Name: Attachment Description: Snow blowers Warranty Term (months, years): Percent Discount (%) to be applied to Price List: Date & I.D. of the Price List: 2.0 Delivery Charges: (SEE SPECIAL TERMS AND CONDITIONS) DELIVERY STARTING POINT (City) (State & Zip Code) Price Per Loaded Mile Minimum Delivery Charge 3.0 Price for additional Service Manual: Price for additional Parts Manual: 4.0 Installation Services - Per Hour (Shop Labor Rate) $99 Installation services may be requested on an "as needed" basis. (See Special Terms and Conditons) $0 $0 888-448-5266 763-422-3949 5% US Price List 2016-2017 NO FLAT RATE ALLOWED $0.50 St. Pascal 12 months Quebec CA G0L 3YO $600 Lano Equipment Anoka Scott Fahey 6140 Hwy 10 NW Normand [email protected]Anoka, MN 55303 612-223-0510
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
2.0 Delivery Charges:(SEE SPECIAL TERMS AND CONDITIONS)
DELIVERY STARTING POINT (City)(State & Zip Code)
Price Per Loaded Mile
Minimum Delivery Charge
3.0 Price for additional Service Manual:
Price for additional Parts Manual:
4.0 Installation Services - Per Hour (Shop Labor Rate) $99 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditons)
N86-280H @ N92-280HDTR, N98-280H assembly & greasing (gear for chute, chute, 3-pts attachment, rotation. If ordered : cylinder, hydraulic motor for rotative drum & hoses)
AS-N280
$243
N92-310H@ N112-342HTR assembly & greasing (gear for chute, chute, 3-pts attachment, rotation. If ordered : cylinder, hydraulic motor for rotative drum & hoses)
AS-N310-342
$273
Industrial assembly & greasing (chute if transportation allows, If ordered : hoses) AS-IND $276
ECONOR/NORMAND Pull type assembly & greasing (gear for chute, chute, 3-pts pins, rotation. If ordered : cylinder, rear blade & hoses)
AS-NINV
$202
The prices for assemby included only labor Prices shown in section «Fees for assembly of snowblowers» are NET prices
No discount applicable on them.
Warranty Every product manufactured by Normand Co. Ltd is guaranteed against manufacturing and raw material
defects (excluding the P.T.O. shafts, gearboxes, engines, hydraulic motors, hydraulic cylinders, telescopic cylinders, tires, hubs and wheels, which are covered by the manufacturer warranty) for a full year from the date of purchase, provided that the product has not been modified or abused in any way.
This warranty does not cover accidents or breaks caused by objects other than snow (metal bits, concrete, wood, asphalt, tires, etc.). Also blades, skid shoes, soles of skid shoes, driving chains and tires
wear is not covered by the warranty. We will replace or repair any defective part at no cost if they are returned prepaid at our plant in Saint-Pascal (Kamouraska, Québec, Canada). Our obligations are limited
to the replacement and/or repair of the defective part.
Effective April 1st, 2016 Normand Co. Ltd
2 418 492-2712
2016 $US
IMPORTANT NOTICE
The lifetime of the driving shaft and its components such as forks, seals and tubes depends on several factors that cannot be controlled by Normand Company. The following issues directly affect the lifetime of the drive shaft:
• Too big tractors (an excessive P.T.O. angle) • The P.T.O. joints • The angle on each end of the P.T.O must be equal. • The shear bolts (use only the original bolts) • The frequency of lubrication and the type of grease used (good quality grease, industrial-type) • Maximum length of the P.T.O.
In the event that one or more of the above mentioned situations applies, we suggest you as an option the following solutions.
• To increase the distance from the tractor to the snowblower would reduce the angle at the joints. • A bigger driving shaft (for an intensive use when the tractor is at the top of the recommended power would
extend the lifetime of the shaft when the operating angle is moderate. • A driving shaft with multilobe tubes (would facilitate the sliding of the tubes) • The installation of a raiser and reducer gearbox 1000 rpm to 540 rpm on the snowblower would reduce the
angle and mechanical stress of the P.T.O. on the tractor.
TO AVOID ACCEPTABLE
TOO BIG ANGLE AT THE P.T.O. JOINTS REASONABLE ANGLE AT THE P.T.O. JOINTS
TO AVOID RECOMMENDED
NON EQUALS ANGLES AT THE P.T.O. JOINTS EQUAL ANGLES AT THE P.T.O. JOINTS
Effective April 1st, 2016 Normand Co. Ltd
3 418 492-2712
2016 $US
EX SERIES SNOWBLOWERS
MODELS EX52 EX62 EX72 Recommended horsepower (HP PTO) 16 @ 40* 18 @ 40* 20 @ 40* Basic price (including chute, gap rod for deflector, P.T.O. & hardware)
$2 121
$2 170
$2 304
Manual chute rotation 49-6800 $161
49-6800 $161
49-6800 $161
Chute rotation by hydraulic motor (including hydraulic motor)
49-6910 $449
49-6910 $449
49-6910 $449
Hydraulic cylinder (2’’ x 4’’) (with flow reducer))
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
Kit of 2 lateral skid shoes (including hardware)
EN-PATLAT08 $115
EN-PATLAT08 $115
EN-PATLAT08 $115
∗ Use with a T40 PTO shaft if more than 30HP PTO Blades & skid shoes wear not covered by the warranty
Supplement for PTO shaft
Supplement for T40 PTO in replacment of T20 PTO shaft SPTO T40/T20 $67
Special colors (ordered before fabrication) Surfacer epoxy, urethane painting (black, blue, green, orange, yellow ind.) EX52 @ EX72 $118
No cancellation of special color will be accepted.
4
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
♦ Prices are based on a minimum of 10 units per model ♦ Available on booking only
2016 $US
ECONOR
SNOWBLOWERS
5
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
Basic price (including chute, gap rod for deflector, P.T.O. & hardware)
$2 551
$2 670
$2 788
$2 899
$3 275
$3 708
$4 495
$4 690
$5 938
$4 286
$5 795
Manual chute rotation EN-ROTM01 $156
EN-ROTM01 $156
EN-ROTM01 $156
EN-ROTM01 $156
EN-ROTM01 $156
EN-ROTM01 $156
EN-ROTM02 165$
EN-ROTM02 $165
– EN-ROTM03
$165
–
Chute rotation by hydraulic cylinder 2” x 4” (non included)
EN-ROTC01 $237
EN-ROTC01 $237
EN-ROTC01 $237
EN-ROTC01 $237
EN-ROTC01 $237
EN-ROTC01 $237
EN-ROTC02 $254
EN-ROTC02 $254
–
–
–
Hydraulic cylinder (2’’ x 4’’) (with flow reducer))
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
– EN14-1013
$115
–
Hydraulic cylinder (2.5’’ x 8’’)
–
–
–
–
–
–
–
– 14-1011 $128 – 14-1011
$128
Chute rotation by including hydraulic motor)
EN-ROTE01 $449
EN-ROTE01 $449
EN-ROTE01 $449
EN-ROTE01 $449
EN-ROTE01 $449
EN-ROTE01 $449
EN-ROTE02 $454
EN-ROTE02 $454
EN-ROTE11 $454
EN-ROTE01 $449
EN-ROTE12 $454
Kit of 2 skid shoes (including hardware)
EN-PATLAT08 $91
EN-PATLAT08 $91
EN-PATLAT08 $91
EN-PATLAT08 $91
EN-PATLAT08 $91
EN-PATLAT08 $91
EN-PATLAT09 $112
EN-PATLAT09 $112
EN-PATLAT09 $112
EN-PATLAT08 $91
EN-PAT02 $132
Chain accelerator 1 :1.28 540 RPM @ 693 RPM
06-2300 $561
06-2300 $561
06-2300 $561
06-2300 $561
06-2300 $561
06-2302 $561
–
–
–
–
–
Chain rising box 1 :1 540 RPM @ 540 RPM
–
–
–
–
–
– 06-2303
$928 06-2303
$928
–
–
–
Rear scraper with carbon steel blade with chain
–
–
–
–
–
–
–
–
– 49-5804
$978 49-5803
$978
Rear scraper with Tivar blade with chain
–
–
–
–
–
–
–
–
– 49-5805
$1 134 49-5802 $1 282
Semi industrial chute (extra charge)
S49-3789 $381
S49-3789 $381
S49-3789 $381
S49-3789 $381
S49-3789 $381
S49-3789 $381
S49-0798 $524
S49-0798 $524 – – Included
Hydraulic cylinder for semi industrial chute
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
EN14-1013 $115
14-1011 $128
14-1011 $128 - - 14-1011
$128 Chain guard with hardware (black – installation non included – 2 holes to drill)
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
EN-GC01 $51
Included
Hoses kit with connectors (not inst.) for chute rotation only
14-2100-35 $131
14-2100-35 $131
14-2100-35 $131
14-2100-35 $131
14-2100-35 $131
14-2100-35 $131
14-2100-36 $131
14-2100-36 $131
14-2100-36 $131
14-2100-36 $131
14-2100-36 $131
Hoses kit with connectors (not inst.) for chute rotation & hydraulic cylinder
14-2100-26 $259
14-2100-26 $259
14-2100-26 $259
14-2100-26 $259
14-2100-26 $259
14-2100-26 $259
14-2100-28 $259
14-2100-28 $259
14-2100-28 $259
14-2100-25 $254
14-2100-12 $323
Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP
6
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
2016 $US
ECONOR SNOWBLOWERS (suite)
TO ADD TO THE BASIC PRICES Supplement for PTO T40 in replacement of PTO T20 SPTO T40/T20 $67 Supplement for PTO T60 in replacement of PTO T40 SPTO T60/T40 $128
SPECIAL COLORS (ordered before fabrication) E48 @ E78 E80, E86, E94 & E100
* Use with a P.T.O. shaft T40 if more than 30 HP ** Use with a P.T.O. shaft T60 if more than 40 HP The weight does not include chute and accessories. Specifications are subject to change without notice
8
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
CONVERSION KIT
FOR ECONOR® SNOWBLOWERS
for Skid Steer
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712 Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
9
THE ABOVE PRICES OF CONVERSION KIT INCLUDE
• Hydraulic distribution block controlling the rotation of the impeller and auger, chute rotation and action of deflector
• Chute rotation by gear (including hydraulic motor) (EN-ROTE01) • Hydraulic motor for the rotation of the shaft of the fan ; • Hydraulic cylinder (1) for chute deflector (EN14-1013) • Hoses connecting the distribution block to the motors (2) and the cylinder • Attachment adaptor for « skid steer »
ARE NOT INCLUDED Hoses between skid steer and hydraulic distribution block
CONVERSION KIT
FOR ECONOR® SNOWBLOWERS for Skid Steer
PART #
DESCRIPTION
OIL VOLUME
REQUIRED GPM
MOTOR POWER (HP equivalent) at 2,750 LBS PRESSURE
BASIC PRICES*
49-3610-01 Conversion kit 100S for E60-220 15@18 = 18@23 HP $3 762
49-3610-02 Conversion kit 125S for E60-220 18@23 = 23@26 HP $3 899
49-3610-03 Conversion kit 160S for E60-220, E66-220 & E72-240 23@25 = 28@32 HP $3 901
49-3610-04 Conversion kit 160T for E60-220, E66-220 & E72-240 23@28 = 28@36 HP $4 253
49-3610-05 Conversion kit 200T for E60-220, E66-220 & E72-240 28@35 = 36@45 HP $4 272
49-3610-06 Conversion kit 160T for E78-240 23@28 = 28@36 HP $4 315
49-3610-07 Conversion kit 200T for E78-240 28@35 = 36@45 HP $4 410
* Do not forget to add the price of the snowblower to the basic prices of the conversion kit. Prices for ECONOR snowblowers are available on page 6
ESSENTIAL ACCESSORIES TO ADD THE BASIC PRICES PART # PRICE
ECONOR snowblowers E60-220 @ E78-240 See page 6 Dual trigger swith control (with connectors, without wire) 14-8601-01 $353 Dual trigger swith control + electric wire (20’ long) 14-8601-02 $730
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
10
NORMAND SNOWBLOWERS
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
11
40 @ 65 HP
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION FOR MODELS N54-240H @ N74-250H PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-3789 $648
CHUTE SELECTION FOR MODELS N74-260H & N86-260HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-3799 $685
OPTION FOR CHUTE PART # PRICE Anti fog removable front panel for chute 29-3789 29-3789-60 $89 Anti fog removable front panel for chute 29-3799 29-3799-60 $89
CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-4850 $93 For chute 29-3789 Hydraulic cylinder 2" x 4" including flow reducer* EN14-1013 $115 For chute 29-3799 Hydraulic cylinder 2" x 6" including flow reducer* EN14-1016 $125
*Limited warranty of the chute if not included
CHUTE ROTATION PART # PRICE Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve EN-ROTE14 $514
DRUM ROTATION FOR MODELS N82-260HTR & N86-260HTR PART # PRICE Hydraulic motor with chrome shaft and valve 14-8205-25 Included
P.T.O. shaft (1 3/8 – 6 splines snowblower side)
P.T.O. MODELS 1 3/8 – 6 splines – tractor side PART # PRICE (suppl.)
T20 For N54-240H & N60-240H 06-0006 Included T40 In replacement of T20 P.T.O. shaft (supplement) SPTO-T40/T20 $67 T40 For N68-250H @ N74-250H 06-0010 Included T60 For N74-260H, N82-260H @ N86-260HTR 06-0015 Included
• Carbon steel skid shoes and reversible blade are included. • P.T.O. included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.
CHUTE NOT INCLUDED
MODELS & BASE PRICES 20 @ 40 HP* 40 @ 65 HP 40 @ 65 HP
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
SKID SHOES & BLADES KITS Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)
Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel.
Blades & skid shoes wear not covered by the warranty
FIXED LATERAL BLADES N54-240h @ N86-260HTR PART # PRICE For N54-220 @ N82-260HTR Set of fixed lateral blades (left & right) (40” heigth, 3” width) 29-4314 $278
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N54-240H @ N82-260H, for 2 hydraulic functions 14-2100-03 $269 For N82-260HTR & N86-260HTR, for 3 hydraulics functions 14-2100-04 $352
* Use with a P.T.O. shaft T40 if more than 30 HP The weight does not include chute and accessories. Specifications are subject to change without notice
14
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
MODELS & BASE PRICES 60 @ 85 HP 60 @ 85 HP 60 @ 85 HP 60 @ 85HP 75 @ 120 HP 75 @ 120 HP
OPTION FOR CHUTE 29-0798 PART # PRICE Anti fog removable front panel 29-0798-60 $89
CHUTE DEFLECTOR CONTROL PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128
*Limited warranty of the chute if not included. CHUTE ROTATION PART # PRICE
For N86-280H @ N92-280HDTR & N98-280H Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE15
$540
For telescopic chute 29-0670 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE13
$540
DRUM ROTATION FOR MODELS N86-280HTR @ N92-280HDTR PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
CHOICE OF P.T.O. shaft
P.T.O. MODELS (1 3/8 – 6 splines snowblower side) PART # PRICE (suppl.) 1 3/8 – 6 splines tractor side
T60 / N86-280H @ N92-280HTR 06-0015 Included T80 / assembly like a T60 (bigger) SPTO-T80/T60 $234 P.T.O. MODELS (1 ¾ - 20 splines snowblower side) 1 3/8 – 6 splines tractor side T80 / N92-280HD, N92-280HDTR, N98-280H 06-0001 Included
• Carbon steel skid shoes and reversible blade are included. • P.T.O. is included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.
CHUTE NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
15 418 492-2712
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.) Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel.
CHUTE SELECTION FOR MODELS N92-310H @ N98-312HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336
OPTION FOR CHUTE PART # PRICE Anti fog removable front panel for chute 29-1792 29-1792-60 $89
CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128
*Limited warranty of the chute if not included
CHUTE ROTATION PART # PRICE
For N92-310H @ N98-312HTR Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE16
$540
For telescopic chute EN-CHUI-05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE17
$540
DRUM ROTATION FOR MODELS WITH ROTARY DRUM PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included
(with
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES
• Carbon steel skid shoes and reversible blade are included. • P.T.O. T80 included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included
CHUTE NOT INCLUDED
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) P.T.O. SHAFT (1 ¾ - 20 splines snowblower side)
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES FULL FLIGHT AUGER replacement for main auger PART # PRICE (suppl.) For N92-310H @ N92-312HTR Full flight auger (each) SVP-92 $1 300 For N98-310H @ N98-312HTR Full flight auger SVP-98 $1 401
Hardox 450 TEETH on full flight auger PART # PRICE (suppl.) For N98-310H @ N98-312HTR on full flight auger (For one auger) SDH-003 $588
SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)
Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel..
For N92-310H & N98-310H Set of fixed lateral blades (left & right) (46'' height, 4'' width)
29-0327
$287
For N92-311H @ N92-312HTR, N98-311H @ N98-312HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)
29-1318
$310
For N92-311H @ N92-312HTR, N98-311H @ N98-312HTR Set of hydraulic lateral blades + cylinder (1)
70-0500
$2 609
Blades & skid shoes wear not covered by the warranty
Effective April 1st, 2016 Normand Co. Ltd
19 418 492-2712
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N92-310H, N92-312H, N98-310H, N98-312H, with semi industrial chute, 2 hydraulic functions 14-2100-01 $284
For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $365
For N92-310H, N92-312H, N98-310H, N98-312H with telescopic chute, 3 hydraulic functions 14-2100-30 $427
For N92-311HTR, N92-312HTR, N98-311HTR, N98-312HTR with telescopic chute, 4 hydraulic functions 14-2100-32 $500
For fees for assembly, see page 2
SPECIAL COLORS (ordered before fabrication MODELS PRICE
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models N98-310H @ N112-342HTR PART # PRICE Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336
OPTION FOR CHUTE 29-1792 PART # PRICE Anti fog removable front panel 29-1792-60 $89
CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128
*Limited warranty of the chute if not included
CHUTE ROTATION PART # PRICE
For N98-340H @ N112-342HTR Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE16
$540
For telescopic chute EN-CHUI-05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE17
$540
DRUM ROTATION FOR MODELS WITH ROTARY DRUM PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included
• Carbon steel skid shoes and reversible blade are included. • P.T.O. T80 included. • Hoses holder kit (EN-SUP02) is included. • Hydraulic motor with chrome shaft and valve for rotary drum included.
CHUTE NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
21 418 492-2712
side
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES FULL FLIGHT AUGER replacement for main auger PART # PRICE (suppl.) For N98-340H @ N98-342HTR Full flight auger SVP-98 $1 401 For N102-340H @ N102-342HTR Full flight auger SVP-102 $1 427 For N112-341H @ N112-342HTR Full flight auger SVP-112 $1 535
Hardox 450 TEETH on full flight auger PART # PRICE (suppl.) For N98-340H @ N112-342HTR on full flight auger (For one auger) SDH-003 $588
SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.) Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel..
For N98-340H & N102-340H Set of fixed lateral blades (left & right) (46'' height, 4'' width)
29-0327 $287
For N98-341H @ N112-342HTR Set of fixed lateral blades (left & right) (55 ½'' height, 4'' width)
29-1318
$310
For N98-342H & N98-342HTR Set of hydraulic lateral blades + cylinder (1) 70-0500 $2 609 For N102-342H to N112-342HTR Set of hydraulic lateral blades + cylinder (1) 70-0500 $2 609
Blades & skid shoes wear not covered by the warranty.
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N98-340H to N112-342H with semi industrial chute, 2 hydraulic functions 14-2100-01 $284 For N98-341HTR to N112-342HTR with semi industrial chute, 3 hydraulic functions 14-2100-02 $365 For N98-340H to N112-342H with telescopic chute, 3 hydraulic functions 14-2100-30 $427 For N98-341HTR to N112-342HTR with telescopic chute, 4 hydraulic functions. 14-2100-32 $500
For fees for assembly, see page 2
SPECIAL COLORS (ordered before fabrication MODELS PRICE
The weight does not include chute and accessories. Specifications are subject to change without notice
24
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
HE+ Series Normand snowblower with Essa+ scraper blade
Created and developed by a snow removal company, the scraper blade Essa + patented and used since 2002, added to a Normand snowblower is an evolved, complete and versatile tool.
The snowblower of the E+ serie keep the same specifications as the Normand snowblowers H series making it the fastest snow removal tool, the most effective, the most robust and the most successful of the market.
The Essa + scraper blade consists of Hardox 450 steel offering light weight, strength and excellent durability. Its 2 points of articulation are greasable, robust and durable.
The Essa + scraper blade is powered by two cylinders that can move down the scraper blade and raise the blower 7 ½ '' when the scraper blade is lowered to the maximum.
The cylinders are positioned so that they optimize the strength, the robustness and the durability of these and points of articulation.
Deployed to the front of the snowblower, the scraper blade Essa + is the only one making it possible to pick up the snow further ahead and avoiding to leave piles of undesired snow in front of garage doors or other obstacles.
The scraper blade deployed also allows you to leave before time without increasing your fast execution while offering a higher quality of surface cleaning and better service.
The scraper blade, in the raised position, allows the use of the snowblower its full cutting height (for snow blowers 1 auger). The scraper blade is easily removable. The body of the scraper can be removed simply by removing two attachment pins. Therefore the snowblower may be used conventionally.
Of series, rubber blades are fixed over the entire width of the scraper and along the sides. The very resistant rubber protects the asphalt and pavement streaks and traces of rust and also offers an incomparable quality of surface cleaning.
THE BEST QUALITY AT THE BEST PRICE!
Model shown : N98-342HE+
Effective April 1st, 2016 Normand Co. Ltd
25 418 492-2712
2016 $US
Scraper blade Essa+ installed on snowblower with 1 auger
Scraper blade Essa+ installed on snowblower with 2 augers
3
2 1
3
2 1
The scraper blade, in the raised position, allows the use of the snowblower its full cutting height
4
Raise the snowblower 7 ½ '' when the scraper blade is lowered to the maximum.
The scraper blade, in the raised position, allows the use of the snowblower normally
4
Raise the snowblower 7 ½ '' when the scraper blade is lowered to the maximum.
Effective April 1st, 2016 Normand Co. Ltd
26 418 492-2712
2016 $US
MODELS & BASE PRICES
H+ Series Normand snowblower with Essa+ scraper blade
N86-280HE+ N92-280HDE+ N92-310HE+ N98-342HE+
$10 214 $11 413 $12 495 $14 608
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models N86-280HE+ & N92-280HDE+ PART # PRICE Semi-industrial with 1 flat deflector & 1 rounded deflector 29-0798 $810 Hydraulic telescopic (mounted cylinder included) 29-0670 $3 090
CHUTE SELECTION for models N92-310HE+ & N98-342HE+ PART # PRICE Semi-industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336
OPTION FOR CHUTE PART # PRICE For chute 29-0798 Anti fog removable front panel 29-0798-60 $89 For chute 29-1792 Anti fog removable front panel 29-1792-60 $89
CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2 1/2"x 8")* 14-1011 $128
*Limited warranty of the chute if not included
CHUTE ROTATION PART # PRICE
For chute 29-0798 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE21
$540
For chute 29-1792 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE19
$540
For telescopic chute 29-0670 & EN-CHU-I05 Chute rotation kit including motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE20
$560
Are included • H series snowblower • Carbon steel skid shoes and reversible blade • P.T.O. shaft • Hoses holder kit (EN-SUP02) • Essa+ scraper blade • Two (2) lift cylinders • Hoses from the cylinder to « T » connectors • Main et lateral rubber blades for the scraper
CHUTE NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
27 418 492-2712
2016 $US
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite)
Blades & skid shoes wear not covered by the warranty.
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For N86-280H with semi industrial chute, 2 hydraulic functions 14-2100-07 $278 For N92-280HD, N92-310H, N98-342H with semi industrial chute, 2 hydraulic functions 14-2100-01 $284 For N86-280H, N92-280HD, N92-310H, N98-342H with telescopic chute, 3 hydraulic functions 14-2100-30 $427
For scraper blade N86-280HE+ (From de « T » connector to the tractor) 14-2100-38 $131 For scraper blade N92-280DHE+, N92-310HE+ (From the «T » connector to the tractor) 14-2100-39 $131 For scraper blade N98-342HE+ (From the « T » connector to the tractor) 14-2100-40 $131
The weight includes the scraper blade but doesn’t include chute and accessories. Specifications are subject to change without notice
Effective April 1st, 2016 Normand Co. Ltd
30 418 492-2712
2016 $US
MODELS & BASE PRICES Snowblowers for sidewalks
50 @ 75 HP
N50-262 N60-262H $6 505 $6 684
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for models PART # PRICE For N50-262 Semi industrial with rounded deflector 29-3759 $752 For N60-262H Semi industrial with 1 flat deflector & 1 rounded deflector 29-3799 $685
OPTION FOR CHUTE 29-3799 PART # PRICE Anti fog removable front panel 29-3799-60 $89
CHUTE DEFLECTOR CONTROL* PART # PRICE Telescopic gap rod 29-0850 $93 Hydraulic cylinder (2"x 4") with flow reducer* for chute 29-3759 EN14-1013 $115 Hydraulic cylinder (2"x 6") with flow reducer* for chute 29-3799 EN14-1016 $125
*Limited warranty of the chute if not included
CHUTE ROTATION PART # PRICE
Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE14
$514
P.T.O. SHAFT (1 3/8 – 6 splines snowblower side)
P.T.O. MODELS 1 3/8 – 6 splines tractor side PART # PRICE (suppl.)
T60 06-0015 Included T80 assembly like a T60 (bigger) SPTO-T80/T60 $234
• Standard color : Industrial yellow • Reversible carbon steel blade and skid shoes are included • PTO T60 Included; • Hoses holder kit (EN-SUP02) is included; • Side reinforcement and 3-pts hitch in Hardox 450; • Lateral blade in Hardox 450; • Two semi full flight augers
CHUTE NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
31 418 492-2712
2016 $US
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES HARDOX 450 TEETH on full flight auger PART # PRICE (suppl.) Hardox 450 teeth (For one auger) SDH-003 $588
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE
For N50-262 & N60-262H with semi industrial chute, 2 hydraulic functions 14-2100-03 $269
For fees for assembly, see page 2
SPECIAL COLORS (ordered before fabrication MODELS PRICE
For N74-250HINV & N82-260HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE14
$514
For N92-280HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE15
$540
For N102-310HINV Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE16
$540
• Carbon steel skid shoes & reversible blade are included • PTO Included; • Hoses holder kit (EN-SUP02) is included; • Side reinforcement and 3-pts hitch in Hardox 450
CHUTE NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
34 418 492-2712
2016 $US
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES OPTION FOR PTO ON N74-240INV @ N102-310HINV PART # PRICE N74-250HINV Protective screen EN-DEFL05 $127 N82-260HINV Protective screen EN-DEFL03 $133 N92-280HINV Protective screen EN-DEFL01 $137 N102-310HINV Protectice screen EN-DEFL04 $149
SKID SHOES & BLADES KITS
Hardness level of material 1 being the hardest & 3 the softness. PART # PRICE (suppl.)
Carbon steel (2)
All blades & skid shoes installed on all snowblowers are made with carbon steel.
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) FRAME FOR REAR BLADE (without blade, without cylinder, without chains)
PART #
PRICE
For N74-250HINV Frame for rear blade 29-5824 $783 For N82-260HINV Frame for rear blade 29-5825 $792 For N92-280HINV Frame for rear blade 29-5826 $908 For N102-310HINV Frame for rear blade 29-5823 $935
CYLINDERS OR CHAINS FOR REAR BLADES *▪ PART # PRICE Hydraulic cylinder 2 x 6 (2 500 lb) - 2 units / rear blade 14-1016 $125 Hydraulic cylinder 2 x 6 HD (3 000 lb) - 2 units / rear blade 14-1016HD $149 Complete kit of chains 03-5215 $122
* These components are required for the warranty of the rear blade. ▪ These components are required for the mounting & installation of the blade at our plan.
HOSES KIT WITH CONNECTORS – NOT INSTALLED PART # PRICE For Pull type snowblower, 2 hydraulic functions 14-2100-12 $323 For rear blade with cylinder on Pull type snowblower 14-2100-13 $244
For fees for assembly, see page 2
SPECIAL COLORS (ordered before fabrication) MODELS PRICE
The weight does not include chute and accessories. Specifications are subject to change without notice
37
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
2016 $US
MODELS & BASE PRICES 100 @ 180 HP 100 @ 200 HP 140 @ 200 HP 140 @ 350 HP 250@ 350 HP N99-342HTRSI N100-342TRI N100-362TRI 200 N100-362TRI 300 N102-402TRI
The HP PTO ranges mentionned are the minimum & the maimum required for effective and durable usage
On all industrial models, the chute is on the left side of the snowblower (tractor view).
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES CHUTE SELECTION for model N99-342TRSI PART # PRICE
Semi industrial with 1 flat deflector & 1 rounded deflector 29-1792 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I05 $3 336
CHUTE SELECTION for models N100-342TRI & N100-362TRI PART # PRICE
Semi industrial «with 1 flat deflector & 1 rounded deflector 29-1789 $986 Hydraulic telescopic (mounted cylinder included & 2 anti fog removable front panels) EN-CHU-I03 $3 614 Telescopic with articulated deflectors (cylinder mounted Included) EN-CHU-I02 $4 996
OPTION FOR CHUTE PART # PRICE For chute 29-1792 Removable front panel anti fog 29-1792-60 $89 For chute 29-1789 Removable front panel anti fog 29-1789-60 $89
CHUTE SELECTION for model N102-402TRI PART # PRICE Semi industrial «with 1 flat deflector & 1 rounded deflector 29-1789 $986 Telescopic with articulated deflectors (cylinder mounted Included) EN-CHU-I01 $5 010
CHUTE DEFLECTOR CONTROL* PART # PRICE Hydraulic cylinder (2 ½'' x 8'') 14-1011 $128
*Limited warranty of the chute if not included
ACCESSORIES INCLUDED IN THE BASE PRICES
• Two full flight augers without teeth (semi full flight augers); • Lower auger with Hardox 450 teeth • Fixed lateral blades (except N99-342HTRSI); • Hardox 450 skid shoes and blades; • Hydraulic motor with chrome shaft and valve for drum rotation included.
CHUTE & P.T.O. SHAFT NOT INCLUDED
Effective April 1st, 2016 Normand Co. Ltd
38 418 492-2712
2016 $US
REQUIRED ACCESSORIES TO ADD TO THE BASE PRICES (suite) CHUTE ROTATION PART # PRICE
For chute 29-1792 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE16
$540
For EN-CHU-I05 Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE17
$540
N100-342TRI et N100-362TRI Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE09
$663
N102-402TRI Chute rotation kit including gear, motor holder & hydraulic motor with chrome shaft and valve
EN-ROTE10
$676
DRUM ROTATION PART # PRICE Hydraulic motor with chrome shaft and valve 14-8206-25 Included
W2600 / with clutch 06-0023 $2 017 For N100-342TRI to N120-402TRI Clutch in replacement of shear plates and safety bolt on driving shaft for the augers SEMB-001 $1 170(suppl.)
BOX REDUCER PART # PRICE
For N99-342HTRSI, N100-342TRI Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200
$2 883
For N100-362TRI 200 Box reducer with 3 gears (175HP) 1000@540RPM & reducer/reverser (225HP) 1 ¾ - 20 splines, including mounting kit
SBR-200H
$2 961
For N100-362TRI 300HP & N102-402TRI Box reducer with 2 gears (350 HP) 1000@540RPM
SBRI-300
$3 576
For N100-362TRI 300HP & N102-402TRI Box reducer with 3 gears (350 HP) 1000@540RPM (Normand case exclusively)
SBR-300
$4 692
For all models of boxes reducer or accelerator, specifications & prices, see pages 44 @ 46.
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES LUBRIFICATION SYSTEM INCLUDING PUMP AND TANK * PART # PRICE
For N102-402TRI Lubrification system SBRI-300 14-8013 $1 488 For N100-362TRI300 Lubrification system SBRI-300 14-8014 $1 488 For N102-402TRI Lubrification system SBR-300 14-8015 $1 488 For N100-362TRI300 Lubrification system SBR-300 14-8016 $1 488
* Recommended on tractor more than 250 HP.
Effective April 1st, 2016 Normand Co. Ltd
39 418 492-2712
2016 $US
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite) LATERAL BLADES HARDOX 450 PART # PRICE N99-342HTRSI Fixed lateral blades (55'' x 4'') 50-1318 included N99-342HTRSI & N100-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 50-1810 $3 121
N110-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 70-0010 $3 149 N120-342TRI Hydraulic blades + cylinder (84'' x10'') in Hardox 450 70-0020 $3 177 N100-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3800 $3 121 N110-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3808 $3 183 N120-362TRI Hydraulic blades + cylinder (84'' x 10'') in Hardox 450 50-3809 $3 215 N102-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 50-2810 $3 909 N110-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 70-0030 $3 934 N120-402TRI Hydraulic blades + cylinder (96'' x 16'') in Hardox 450 50-2815 $3 957
KIT OF LATERAL EXTENSION 3'' - left & right PART # PRICE For N99-342HTRSI & N100-342TRI EN-EL301 $795 For N100-362TRI EN-EL302 $815 For N102-402TRI EN-EL303 $932
RUBBER KIT PART # PRICE For N100-342TRI Front rubber lining kit 50-1193 $440 For N110-342TRI Front rubber lining kit 70-0011 $450 For N120-342TRI Front rubber lining kit 70-0021 $450 For N100-362TRI Front rubber lining kit 50-3180 $460 For N110-362TRI Front rubber lining kit 50-3181 $469 For N120-362TRI Front rubber lining kit 50-3182 $494 For N102-402TRI Front rubber lining kit 50-2180 $491 For N110-402TRI Front rubber lining kit 70-0031 $508 For N120-402TRI Front rubber lining kit 50-2181 $525
NB : An «S» before the part number means that extra costs have to be added to the base price for the replacement of the original part.
ADJUSTABLE WHEELS KIT IN HARDOX 450 (in replacement of skid shoes) PART # PRICE (suppl.)
For N100-342TRI & N100-362TRI Extra charge for 2 wheels
S50-3355
$588
For N102-402TRI Extra charge for 2 wheels S50-0355 $588
HARDOX 450 TEETH ON FULL FLIGH AUGER PART # PRICE (suppl.) For N99-342HTRSI For one auger S50-4200 $588 For N100-342TRI, N100-362TRI For one auger S50-1203 $588 For N102-402TRI For one auger S50-0200 $588
Effective April 1st, 2016 Normand Co. Ltd
40 418 492-2712
2016 $US
SPECIAL ACCESSORIES TO ADD TO THE BASE PRICES (suite)
HARDOX 450 IMPELLER WITH REPLACEABLE BLADES PART # PRICE (suppl.) For N100-342TRI Impeller S50-1252 $982 For N100-362TRI 200 Impeller S50-3250 $1 007 For N102-402TRI Impeller S50-2251 Included
SET OF TIVAR SIDE PROTECTOR PART # PRICE For N100-362TRI Set of Tivar side protector – for one side EN-PROTIV362 $423
SET OF QUICK ATTACHMENT #3 CATEGORY PART # PRICE
For N100-342TRI & N100-362TRI Set of quick attachment # 3 category EN-QH01 $1 227
For N102-402TRI Set of quick attachment # 3 category EN-QH02 $1 227
LIGHTS & HOLDER PART # PRICE For N100-342TRI & N100-362TRI Right side on base of chute 50-1850 $375 For N100-342TRI & N100-362TRI Left side on base of chute 50-1851 $375 For N102-402TRI Right side on base of chute 50-0850 $375 For N102-402TRI Left side on base of chute 50-0851 $375 For telescopic chute (Left side) 50-0853 $423 For telescopic chute (Right side) 50-0852 $423
HOSES KIT WITH CONNECTORS – NOT INSTALLED - To the tractor
PART #
PRICE
For N99-342HTRSI with semi industrial chute, 3 hydraulic functions 14-2100-02 $365 For N99-342HTRSI with telescopic chute, 4 hydraulic functions 14-2100-32 $500
HOSES KIT WITH CONNECTORS – NOT INSTALLED – To the distribution plate
PART #
PRICE
SNOWBLOWER For N100-342TRI & N100-362TRI, 2 hydraulic functions 14-2100-14 $290
For N100-342TRI & N100-362TRI, Hydraulic lateral blades, 1 hyd. function 14-2100-17 $97
For N102-402TRI, 2 hydraulic functions 14-2100-21 $294
For N102-402TRI – Hydraulic latera blades, 1 hydraulic function 14-2100-20 $113
CHUTE
For N100-342TRI @ N100-362TRI – Semi industrial chute, 1 hydraulic function 14-2100-15 $113
HOSES KIT WITH CONNECTORS – NOT INSTALLED Of the distribution plate up to the tractor
PART #
PRICE
For N100-342TRI @ N102-402TRI, 1 set required for each of these options : chute rotation, drum rotation, cylinder etc…
14-2100-18
$99
For fees for assembly, see page 2
Because we want ou industrial snowblowers to be both sturdy and lightweight, we use ultra high quality Hardox 450 steel to manufacture the most heavy-duty components.
Compare to the standard steel, Hardox 450 is about 4,5 times harder and more wear resistant while also being 3,5 times more rigid. For instance, a ¼’’ thick Hardox 450 plate is the equivalent of a ¾’’ thick standart steel plate.
Components made with Hardox 450 steel :
• Snowblower side (except on N99-342HTRSI); • Reinforcement snowblower sides; • Drum outline • Impeller with removable blades; • Chute base (except on N99-342TRSI); • Chute gear (except on N99-342TRSI); • Articulated chute deflector; • Full flight auger teeth; • Adjustable wheels and skid shoes; • Removable lateral skid shoes; • Reversible blades; • Lateral blades (except on N99-342HTRSI)); • Double botton (except on N99-342HTRSI); • Oil bath • 3-points plates
The weight does not include chute and accessories. Specifications are subject to change without notice
43
Effective April 1st, 2016 Normand Co. Ltd 418 492-2712
2016 $US
PART#
DESCRIPTION
PICTURE
REVERSES DIRECTION
OF ROTATION
RATIO
RPM
CAPACITY AT
1000 RPM
CENTER
TO CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2154
Box 2 gears
YES
1,8:1 1000 to
555
75 HP
4,85" 1 3/8"-6
male 1 3/8" - 6 female
$1 497
06-2158
Box 2 gears
1,8:1 1000 to
555
85 HP
4,85" 1 ¾"-20
male 1 ¾"-20 female
$1 638
06-2147
Box 2 gears
YES
1,86:1 1000 to
538
300 HP
6,75" 1 3/4"-
20 male 1 ¾"-20 female
$3 245
SBRI-300
Box 06-2147 including mounting kit (brackets and hardware) / For N100-362TRI (300HP) & N102-402TRI
$3 576
For N92-280 @ N104-342TR / For N99-342TRSI @ N100-362TRI
06-2164
Box 3 gears
YES
1,86:1 1000 to
540
225 HP
6,75"
1 ¾" - 20 male
1 ¾"- 20 female
$2 825
NO
1,86:1 1000 to 540
175 HP
8"
SBR-200-280
Box 06-2164 including mounting kit (brackets and hardware) / For N92-280H & N98-280H
$2 883
SBR-200 Box 06-2164 including mounting kit (brackets and hardware) / For N98-340H to N112-342HTR
N99-342TRSI & N100-342TRI
$2 883
SBR-200H Box 06-2164 including mounting kit (brackets and hardware) / For N100-362TRI $2 961
For N100-362TRI & N102-402TRI
06-2155
Box
3 gears
NO
1,88:1
1000 to
531
350 HP
9"
1 ¾" -
20 male
1 ¾ " -20 female
$4 488
SBR-300
Box 06-2155 including mounting kit (brackets and hardware) / For N100-362TRI & N102-402TRI
$4 692
The type of oil to be used in rising & reducer boxes of this page :
Synthetic oil 75W140
RISING & REDUCER BOXES
Effective April 1st, 2016 Normand Co. Ltd
44 418 492-2712
2016 $US
RISING BOX FOR NORMAND SNOWBLOWERS
PART#
DESCRIPTION
PICTURE
REVERSES DIRECTION
OF ROTATION
RATIO
RPM
CAPACITY
AT 1000 RPM
CENTER
TO CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2153
Box 2 gears
YES
1:1 540 to
540
75 HP
4,85" 1 3/8"-6
male 1 3/8"-6 female
$1 326
06-2157
Box 2 gears
YES
1:1 540 to
540
85 HP
4,85" 1 ¾"-20
male 1 ¾’’-20 female
$1 622
06-2151
Box 2 gears
YES
1:1
540 to 540
150 HP
6,75"
1 ¾" - 20
male
1 ¾" - 20 female
$2 171
The prices above do not include installation & mounting kit
RISING & ACCELERATOR BOXES FOR ECONOR MODELS
PART#
DESCRIPTION
REVERSES DIRECTION
OF ROTATION
RATIO
RPM
CAPACITY
AT 1000 RPM
CENTER TO
CENTER SHAFT
INPUT SHAFT
OUTPUT SHAFT
PRICES
06-2300
Rising & accelerator box
E48-200 to E72-240
NO
1:1.28
540 to 644
30 HP
4 3/8''
1 3/8"-6
male
1 3/8"-6 female
$561
06-2302 Rising &
accelerator box E78-240
NO
1:1.28
540 to 644
30 HP
6 1/2"
1 3/8"-6
male
1 3/8"-6 female
$561
06-2303 Rising box E86-280 & E94-280
NO
1:1
540 to 540
60 HP
6 1/2"
1 3/8"-6
male
1 3/8"-6 female
$928
The type of oil to be used in rising & accelerator boxes for ECONOR models :
Chain lubricant spray
The type of oil to be used in rising boxes (with gears) for Normand snowblowers :
Synthetic oil 75W140
Effective April 1st, 2016 Normand Co. Ltd
45 418 492-2712
2016 $US
FOR 30 TO 70 HP TRACTORS (06-1952) AVAILABLE
RATIO RPM SHAFT CENTER TO
CENTER SHAFT PRICES IN OUT IN OUT
1:1 540 540 1 3/8"-6 male 1 3/8"-6 male 8" and more
$2 294 1:1,12 540 604 1 3/8"-6 female 1 3/8"-6 male 10 " and more
1:1,25 540 675 1 3/8"-6 female 1 3/8"-6 male 10 " an more
FOR 70 TO 150 HP TRACTORS (06-1950) AVAILABLE
RATIO RPM SHAFT CENTER TO
CENTER SHAFT
PRICES
IN OUT IN OUT
1 :1
540
540
1 3/4"-20 male
1 3/4"-20 male
10 " and more
$2 310
* Distance required between the two shafts (B) when you order
GEAR BOXES FOR FRONT MOUNTED SNOWBLOWERS
Effective April 1st, 2016 Normand Co. Ltd
46 418 492-2712
2016 $US
SPREADERS
SCR model
S3P model
47
2016 $US
SELF LOADING SAND AND SALT SPREADERS
SCR ECONOMIC Normand’s SCR spreader is perfect to spread sand, salt and other aggregate to control ice and snow on driveways, parking lots, sidewalks and other applications
SPREADING You can get the desired flow by adjusting the rotational speed of the feeding roller as well as the opening of the shutter.
Spreading pattern
FRONT MOUNTING Normand’s SCR spreader can be installed on the front
loader of most tractor. Adjustable plates are installed on the spreader to receive various quick attachments available on the market
QUICK LOADING - LABOR SAVING This heavy-duty spreader is easy to use. Use the hopper as a bucket in the lower position. Drive the tractor into the sand pile and then load. Put the spreader back in the upper position, start hydraulic control and spread the material. Can be operated by a single person.
REAR MOUNTING Normand’s SCR spreader can also be installed on a 3- points rear tractor hitch. (cat # 2). However, a hydraulic cylinder system is required (Optional)
INSTALLATION ON SKID STEER Normand’s SCR spreader can be
installed on the loader of a skid steer. An optional attachment must be fixed to the spreader to receive the skid steer’s quick attach.
Effective April 1st, 2015 Normand Co. Ltd 418 492-2712
48
2016 $US
E 2
MODELS SCR-54 SCR-72 SCR-86 SCR-92 SCR-98
PRICES $3 123 $3 273 $3 471 $3 631 $3 695 CAPACITY The capacity in lb may vary depending on the type of material being used.
0,55 yard 1 340 lb
0.7 yard 1 700 lb
1.1 yard 2 670 lb
1.2 yard 2 910 lb
1.3 yard 3 160 lb
Width 54‘‘ 72‘‘ 86‘‘ 92‘‘ 98‘‘ Depth 35‘‘ 35‘‘ 37‘‘ 37‘‘ 37’‘ Height 32‘‘ 32‘‘ 38‘‘ 38‘‘ 38‘‘ Spread width 48‘‘ 66‘‘ 80‘‘ 86‘‘ 92‘‘ Cushion Valve Included Included Included Included Included Check Valve Included Included Included Included Included Hydraulic motor Included Included Included Included Included Weight 349 lb 518 lb 749 lb 787 lb 825 lb Request : GPM (min. @ max.) PSI (minimum)
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
8 @ 16 GPM
1 300 PSI
* Hoses not included
BOLTED PLATES INCLUDED (2) EN-ATTSCR04 for SCR-54 EN-ATTSCR04 for SCR-72 “ SCR-98
The dealer must weld on the two attachment plates bolted to the spreader the 2 appropriate attachment ** for the model of loader to be used. **These attachments are not included and not available at Normand Company Ltd. Attachments prices & installation fees are under the responsability of the dealer.
Note : Some attachment must be welded according to a particular angle for complete unloading.
EN-ATTSCR03 Quick attach for skid steer
OPTIONS For SCR-54 (65 lb) EN-ATTSCR06 : $350
For SCR-72 @ SCR-98 (65 lb) EN-ATTSCR03 : $356 Installation fees not included – to be supplied by the dealer
Mechanism for 3-points rear tractor hitch
-Including 2 hydraulic cylinders w/o hoses
Cyl. SCR 86/92/98 3 x 6’’ Cyl. SCR 72 2 ½ x 6’’
OPTIONS
SCR-54 & SCR-72 : Attachment cat. #1 (130 lb) EN-ATTSCR01 : $1 071 SCR-86 @ SCR-98 : Attachment cat. #2 (160 lb) EN-ATTSCR02 : $1 282 Installation fees not included – to be supplied by the dealer
ffective April 1st, 2015 No and Co. Ltd 418 492-271
49
2016 $US
SPREADER ON 3-POINTS HITCH S3P
S3P spreader
ECONOMIC
S3P salt and sand spreader is perfect for controlling snow and ice on roads, driveways, sidewalks and others applications.
SPREAD
You can get the desired flow by adjusting the rotational speed of the hydraulically- powered feeding roller as well as the opening of the shutter.
The spreader is mounted on the 3-points rear tractor hitch. Category # 1
MODELS S3P-46 S3P-56
PRICES $2 797 $2 889 Capacity The capacity in lb may vary depending on the type of material being used
0,41 yard
996 lb
0,5 yard 1 215 lb
Spread width 43'' 53'' Width 47'' 57'' Depth 33'' 33'' Height 34 ½'' 34 ½'' Hydraulic motor Included Included Cushion valve Included Included Check valve Included Included Top Screen Included Included Hitch category # 1 # 1 Weight 300 lb 335 lb Request GPM minimum @ maximum PSI (minimum)