SEQ. #416-1217 MINNESOTA PRICING PAGES (Typed Responses Required) December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: 1.0 Manufacturer's Name Attachment Description Warranty Term (months, years) Percent Discount (%) to be applied to Price List Date & I.D. of Price List 2.0 Delivery Charges (See Special Terms and Conditions) DELIVERY STARTING POINT (City) (State, Zip Code) Price per loaded mile 3.0 Price for additional Service Manual Price for additional Parts Manual 4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an "as needed" basis. (See Special Terms and Conditions) Free Free 763-682-6141 24% 1-2-2018 Bush Hog Machine Pricelist NO FLAT RATE ALLOWED $0.45 Selma 90Days Commercial/Gearbox 5 Years Alabama 36703 3 Point Finishing Mowers Trueman Welters Seth Strehler 1600 Highway 55 East Bush Hog [email protected]Buffalo, MN 55313 763-682-2200
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
2.0 Delivery Charges(See Special Terms and Conditions)
DELIVERY STARTING POINT (City)(State, Zip Code)
Price per loaded mile
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)
2.0 Delivery Charges(See Special Terms and Conditions)
DELIVERY STARTING POINT (City)(State, Zip Code)
Price per loaded mile
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)
2.0 Delivery Charges(See Special Terms and Conditions)
DELIVERY STARTING POINT (City)(State, Zip Code)
Price per loaded mile
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)
2.0 Delivery Charges(See Special Terms and Conditions)
DELIVERY STARTING POINT (City)(State, Zip Code)
Price per loaded mile
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)
2.0 Delivery Charges(See Special Terms and Conditions)
DELIVERY STARTING POINT (City)(State, Zip Code)
Price per loaded mile
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Services: Per Hour (Shop Labor Rate) $105.00 Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)
RDTH Series Rear Discharge Finishing Mower ............. FM 1 HDTH Series Rear Discharge Finishing Mowers… ........ FM 3 TD Series Tri-Deck Finishing Mower ............................. FM 5
SINGLE-SPINDLE ROTARY MOWERS
BH Series Razorback Rotary Cutter ............................... SS 1 BH15 Series Rotary Cutter ............................................. SS 2 BH16 Series Rotary Cutter ............................................. SS 2 BH17 Series Rotary Cutter ............................................. SS 4 BH25 Series Rotary Cutter ............................................. SS 6 BH26 Series Rotary Cutter ............................................. SS 6 BH27 Series Rotary Cutter ............................................. SS 6 326 Series Rotary Cutter ................................................ SS 8 327 Series Rotary Cutter ................................................ SS 8
MULTI-SPINDLE RIGID DECK ROTARY MOWERS
SQ84T Squealer Series Twin Spindle Rotary Cutter ...... MS 1 2308 Series Rotary Cutter ............................................. MS 2 2010 Series Rotary Cutter ............................................. MS 4 3308 Series Rotary Cutter ............................................. MS 6 3308SH Series Rotary Cutter ........................................ MS 8 3510 Offset Series Rotary Cutter ................................. MS 10 3510 Series Rotary Cutter ........................................... MS 12 3514 Series Rotary Cutter ........................................... MS 14
FLEX-WING ROTARY CUTTERS
1812 Flex-Wing Series Rotary Cutter ............................ FW 1 1815 Flex-Wing Series Rotary Cutter ............................ FW 3 2215 Flex-Wing Series Rotary Cutter ............................ FW 5 2810 Flex-Wing Series Rotary Cutter ............................ FW 7 2815 Flex-Wing Series Rotary Cutter ............................ FW 9 3810 Flex-Wing Series Rotary Cutter .......................... FW 11 3815 Flex-Wing Series Rotary Cutter .......................... FW 13 4815 Flex-Wing Series Rotary Cutter .......................... FW 15 2820 Flex-Wing Series Rotary Cutter .......................... FW 17
FLAIL SHREDDERS
BRC115 Series Row Crop Flail Shredder ....................... FS 1 BRC118 Series Row Crop Flail Shredder ....................... FS 1 BRC120 Series Row Crop Flail Shredder ....................... FS 3 BRC125 Series Row Crop Flail Shredder ....................... FS 5
BOOM MOWERS
Rear Mounted Boom Mower Series Rotary Cutter ......... BM 1 SM60 Ditch Bank Mower Series Rotary Cutter .............. BM 3
CONSTRUCTION
DSP Series Pull Dirt Scraper ......................................... CS 1 PHD Series Post Hole Digger ....................................... CS 2 PHDHF Farm-Ranch Series Post Hole Digger............... CS 4 PHDHC Construction-Contractor Series Post Hole Digger ........................................................... CS 6 XD Series Backhoes ....................................................CS 10 LG Log Grapples ..........................................................CS 12 AGR Series Ag Grapple… ............................................CS 13 BGR Series Bucket Grapple… .....................................CS 14 BRGR Series Brush Grapple… ....................................CS 14 PF48 Series Pallet Fork… ........................................... CS 15
LANDSCAPE
CRB Series Compact Rear Blade ................................... LS 1 CBX Series Compact Box Blade .................................... LS 1 CLR Series Compact Landscape Rake .......................... LS 2 CRG Series Compact Road Grader................................ LS 2 CPG|CPA Series Compact Plugger and Aerator… ......... LS 3 35 Series Rear Mount Medium Blade ............................. LS 4 50 Series Rear Mount Medium Blade ............................. LS 4 70 Series Medium Duty Blade ........................................ LS 5 91 Series Medium Duty Blade ........................................ LS 6 100 Series Heavy Duty Blade ......................................... LS 7 141 Series Heavy Duty Blade ......................................... LS 8 160 Series Heavy Duty Blade ......................................... LS 9 181 Series Heavy Duty Blade ....................................... LS 10 225/300 Series Heavy Duty Blade ................................ LS 11 LLR Series Economy Landscape Rake ........................ LS 12 MLR Series Medium Duty Landscape Rake ................. LS 12 BBX Series Box Blade .................................................. LS 13 SBX Series Box Blade .................................................. LS 14 MBX Series Box Blade ................................................. LS 15 RBX Series Retractable Shank Box Blade .................... LS 16 RO Series Roll-Over Box Blade .................................... LS 16 RG Series Road Grader ............................................... LS 17 HDRG Series Heavy Duty Road Grader ....................... LS 18 PV Series Pulverizer .................................................... LS 19 PG & MPG Series Plugger Core Type Aerators ............ LS 20 FSP Series Fertilizer Spreader ..................................... LS 21 MS Manure Spreaders ................................................. LS 22 LS Log Splitters ............................................................ LS 23 XC Wood Chipper ........................................................ LS 24 CP Series CultiPackers…............................................. LS 25 Terra Hog ATV\UTV Implement System… ................... LS 26 Quick Hitches… ........................................................... LS 29
TILLAGE
RTC Series Rotary Tillers ............................................... TL 1 RTG Series Rotary Tiller ................................................ TL 2 RTX Heavy Duty Rotary Tillers… ................................... TL 4 Lift Disc Harrow Series ................................................... TL 5 DHP Series Pull Disc Harrow... ...................................... TL 9 APP Series All Purpose Plow ....................................... TL 11 HDSS Series Heavy Duty Subsoiler ............................. TL 12 SS1 Series Subsoiler, LP Series Layoff Plow, lRCV Series Cultivator .................................................. TL 13 PA Series Pasture Aerator ........................................... TL 14
SNOW BLOWERS SBSA Series 54”-60 Single Auger Snow Blowers… ....... SB 1 SBSA Series 72”-97” Single Auger Snow Blowers… ...... SB 2 SBDA Series Double Auger Snow Blowers… ................. SB 3 SBPT Series Pull Type Snow Blowers… ........................ SB 4 SBSS Series Skid Steer Snow Blowers… ...................... SB 6
FINISHINGMOWERS
&TRI-DECKS
FINISHINGMOWERS
&TRI-DECKS
Machine Prices and Specifications Price Revision January 2nd 2018
RDTH72 RDTH84
Cutting Width 60" 72" 84"Cutting Height 1-1/2" - 6-1/2" (1/2" incr.) 1-1/2" - 6-1/2" (1/2" incr.) 1-1/2" to 5-1/2" (1/2" incr.)Horsepower Range 15 to 35 PTO 20 to 40 PTO 30 to 55 PTOHitch Category 1 Category 1 Category 1Size Blade 1/4" x 2-1/2" x 21" 1/4" x 2-1/2" x 25" 5/16" x 2-1/2" x 29"Number of Blades 3 3 3Blade Tip Speed 18,231 fpm 18,272 fpm 18,266 fpmBlade Overlap 1-1/2" 1-1/2" 1-1/2"Blade Uplift Parallel Parallel ParallelDriveline Size ASAE Category 3 ASAE Category 3 ASAE Category 3Front Roller Size 3" x 5" (Opt.) 3" x 5" (Opt.) 3" x 13" (Opt.)Discharge Rear Rear Rear
MODEL RDTH60
RDTH72RDTH84
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FM1
Front Roller Size 3" x 5" (Opt.) 3" x 5" (Opt.) 3" x 13" (Opt.)Discharge Rear Rear RearDeck Plate 7 Gauge 7 Gauge 7 GaugeTire Size (Solid) 3-1/4" x 10-1/4" 3-1/4" x 10-1/4" 4" x 10"
Belt Adjustment Spring Loaded Idler Spring Loaded Idler Spring Loaded Idler
Five Year Limited Gearbox Warranty
Freight NOT included in list price
RDTH60/RDTH72: The RDTH 60 and 72 Series mowers are available as lift-type implements only.They are priced as a complete unit with a choice of options. Your order must specify basic unitnumber to receive a complete unit. Includes driveline.RDTH 84: The RDTH84 Series mower is available as a lift-type implement only. They are priced as acomplete unit with a choice of options. Your order must specify basic unit number to receive acomplete unit. Includes driveline.
HOW TO ORDER:
Prices F.O.B. Selma, Alabama FM1
Machine Prices and Specifications Price Revision January 2nd 2018
RDTH60R RDTH Finishing Mower, Bush Hog Red, 60"RDTH60O RDTH Finishing Mower, Kubota Orange, 60"RDTH60G RDTH Finishing Mower, John Deere Green, 60"RDTH60B RDTH Finishing Mower, New Holland Blue, 60"RDTH72R RDTH Finishing Mower, Bush Hog Red, 72"RDTH72O RDTH Finishing Mower, Kubota Orange, 72"RDTH72G RDTH Finishing Mower, John Deere Green, 72"RDTH72B RDTH Finishing Mower, New Holland Blue, 72"RDTH84R RDTH Finishing Mower, Bush Hog Red, 84"RDTH84O RDTH Finishing Mower, Kubota Orange, 84"RDTH84G RDTH Finishing Mower, John Deere Green, 84"RDTH84B RDTH Finishing Mower, New Holland Blue, 84"
Front Roller Kit RDTH60/RDTH72Front Roller Kit RDTH84Special Paint (RDTH60 and RDTH72 Only)
536 lbs. 566 lbs.
RDTH Series Finishing MowerBASIC UNIT SELECTION
Approx. Wt. Ship Wt. List Price ($US)Model Number Description
$3,352
50034137
588 lbs. 618 lbs.874 lbs.874 lbs.874 lbs.
618 lbs.$3,457
$3,457
OPTIONS
90871
588 lbs. 618 lbs.588 lbs. 618 lbs.
$70
$98
$3,457
$4,306
$4,306
$4,306
$4,306
$3,352
$3,352
$3,352
$3,457
874 lbs.
904 lbs.904 lbs.904 lbs.904 lbs.
536 lbs.536 lbs.536 lbs.588 lbs.
566 lbs.566 lbs.566 lbs.
RDTH72RDTH84
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FM2Prices F.O.B. Selma, Alabama FM2
Machine Prices and Specifications Price Revision January 2nd 2018
HDTH5 HDTH6 HDTH7 HDTH8
Cutting Width 60 72" 84" 99"Cutting Height (1/2" incr.) 1 1/2" - 6 1/2" 1 1/2" - 6 1/2" 1 1/2" - 6 1/2" 1 1/2" - 6 1/2"Tractor HP Range 15-35 PTO 20-40 PTO 30-55 PTO 35-55 PTOHitch Type Cat 1 Std. & QH Cat 1 Std. & QH Cat 1, 2, Std. & QH Cat 1, 2, Std. & QHBlade Size 1/4" x 2 1/2 x 21" 1/4" x 2 1/2" x 25" 5/16" x 2 1/2" x 29" 1/4" x 2 1/2" x 21"Number of Blades 3 3 3 5Blade Tip Speed 18,231 FPM 18,272 FPM 18,266 FPM 18,266 FPMBlade Overlap 1 1/2" 1 1/2" 1 1/2" 1 1/2"Blade Uplift Parallel Parallel Parallel ParallelDriveline Size ASAE Cat 3 ASAE Cat 3 ASAE Cat 3 ASAE Cat 3Front Roller (optional) 3" x 5" 3" x 5" 3" x 5" 3" x 13"Discharge Rear Rear Rear RearDeck Thickness 7ga 7ga 7ga 7gaTires 3 1/4 X 10 Solid 3 1/4 X 10 Solid 4 x 10 Solid 5 x 13 SolidBelts (1) "B" Aramid Cord (1) "B" Aramid Cord (1) "B" Aramid Cord (2) "B" Aramid CordBelt Adjustment Spring-Loaded Idler Spring-Loaded Idler Spring-Loaded Idler Spring-Loaded IdlerGearbox 45 HP 45 HP 55 HP 55 HP
HDTH Series Finish MowersMODEL
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FM3
Gearbox 45 HP 45 HP 55 HP 55 HPApprox. Weight 672 lbs 730 lbs 954 lbs 1190 lbsWarranty Five Year Limited Gearbox Warranty
The Base Unit Selection for the HDTH Finish Mowers comes as a complete unitHow To Order
Prices F.O.B. Selma, Alabama FM3
Machine Prices and Specifications Price Revision January 2nd 2018
HDTH5RHDTH5OHDTH5GHDTH5BHDTH5BK
HDTH6RHDTH6OHDTH6GHDTH6BHDTH6BK
HDTH7RHDTH7OHDTH7GHDTH7BHDTH7BK
HDTH8RHDTH8OHDTH8GHDTH8BHDTH8BK
11901190119011901190
954954954
HDTH Finishing Mower, Bush Hog Red, 8'
HDTH Finishing Mower, Bush Hog Red, 7'HDTH Finishing Mower, Kubota Orange, 7'HDTH Finishing Mower, JD Green, 7'HDTH Finishing Mower, New Holland Blue, 7'
730
954954
$4,299
$4,299
$4,299
HDTH Finishing Mower, Kubota Orange, 8'HDTH Finishing Mower, JD Green, 8'HDTH Finishing Mower, New Holland Blue, 8'HDTH Finishing Mower, Bush Hog Turf Black, 8'
HDTH Finishing Mower, Bush Hog Turf Black, 7'$4,299
Pull Type, Clevis Hitch, Three-Position AdjustmentCategory. 4 80º CV (Main),Category 3 (Decks)10º Side to Side,10º Front to Rear Independentof the Wing Frame
10º Side to Side,10º Front to RearIndependent of the WingFrame
The Tri-Deck Series Mowers are available as pull type units only. They are priced as complete units andare shipped fully assembled. Order by Model Number and add the price of any desired option.
30º Up and 10º Down 30º Up and 10º Down
45 HP - Center & Wings80 HP - Transfer
45 HP - Center & Wings80 HP - Transfer
Prices F.O.B. Selma, Alabama FM5
Machine Prices and Specifications Price Revision January 2nd 2018
TD1500 TD Series Finishing Mower, 15' Cutting WidthTD1700 TD Series Finishing Mower, 17' Cutting Width
$19,105
List Price
($US)
TD Series Tri-Deck Finishing MowerBASIC UNIT SELECTION
OPTIONS
$20,735
Description
Model
Number Approx. Wt.
2752 lbs.2855 lbs.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FM6Prices F.O.B. Selma, Alabama FM6
SINGLE-SPINDLEROTARY MOWERS
Machine Prices and Specifications Price Revision January 2nd 2018
2R Bush Hog Red2G John Deere Green2O Kubota Orange2B New Holland Blue
BH4 BH5 BH6
Cutting Width 4' 5' 6'
2" 2" 2"
Cutting Capacity Up to 1" diameter Up to 1" diameter Up to 1" diameter
Driveline, ASAE Category 3, with Shearpin (BH4 Model Only)Driveline, ASAE Category 3, with Shearpin (BH5 & BH6 Models Only)Driveline, ASAE Category 3, with Slipclutch (All BH4, & BH5 Models)
50076537 Driveline, ASAE Category 3, with Slipclutch (BH6 Models) $264$264
500759015007591950075900
$109
$1,303$1,549
NOTE: Safety shieldings are non-returnable items for all models.
Deflector kit is standard equipment. Must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists.
The BH Series Razorback Rotary Cutter is priced as a basic unit with choice of driveline. To receive a complete cutter, you must indicate your basic unit selection, including your choice of model color from the chart above and indicate your choice of driveline from Group 2, Driveline Selection.
BH Series Razorback Rotary CutterBASIC UNIT SELECTION
491 lbs.577 lbs.
Approx. Wt.
List Price
($US)393 lbs. $1,216
Model
Number
BASIC UNIT SELECTION
$125
Prices F.O.B. Selma, Alabama SS1
Machine Prices and Specifications Price Revision January 2nd 2018
Blade Holder Oval OvalBlades 1/2" x 4" uplift 1/2" x 4" uplift
MODEL
Category 1 Standard and Quick Hitch,see selection
Category 1 Standard and Quick Hitch,see selection
8 X 50 mm Metric Grade 8.8 shearboltor slip clutch
10 x 55 mm Metric Grade 8.8shearbolt or slip clutch
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS2
Blade Holder Oval OvalBlades 1/2" x 4" uplift 1/2" x 4" upliftBlade Tip Speed 14,369 fpm (540 rpm) 14,969 fpm (540 rpm)Wheels Laminated tire Laminated tireRecommended Tractor HP 25 - 40 (PTO) 30 - 45 (PTO)
Safety Deflectors
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order from each group listed for the model you have selected.
Deflector kit is standard equipment. Must be used for all non-agricultural purposes or in areas where
the possibility of thrown objects that could be hazardous to persons or property exists.
Front & rear deflector kit, seeenclosure selection
Front & rear deflector kit, seeenclosure selection
Prices F.O.B. Selma, Alabama SS2
Machine Prices and Specifications Price Revision January 2nd 2018
BH15-2R BH15 Series Rotary Cutter, 5', Bush Hog RedBH15-2O BH15 Series Rotary Cutter, 5', Kubota OrangeBH15-2G BH15 Series Rotary Cutter, 5', John Deere GreenBH15-2B BH15 Series Rotary Cutter, 5', New Holland Blue
Quick Hitch, Cat 1Standard Hitch, Category 1
Shearbolt DrivelineSlip Clutch
Front Deflector KitRear BandFront ChainsRear Chains
50071068 37 lbs. $184
577 lbs. $1,511
577 lbs. $1,511
577 lbs. $1,511
BH15 Series Rotary CutterBASIC UNIT SELECTION
Approx. Wt.
577 lbs. $1,511
GROUP 2 HITCH SELECTION
679 lbs. $2,025
BH16 Series Rotary CutterBASIC UNIT SELECTION
Approx. Wt.
50074734 35 lbs. $127
50072508 42 lbs. $243
List Price
($US)Description
Model
Number
50072509 17 lbs. $54
GROUP 4 ENCLOSURE SELECTION
9 lbs.
Description
List Price
($US)
Model
Number
50071036 $68
$395
31 lbs.
50074076
$2525005312340 lbs.
50071071 34 lbs. $127
GROUP 3 PTO SELECTION
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS3
BH16-2R BH16 Series Rotary Cutter, 6', Bush Hog RedBH16-2O BH16 Series Rotary Cutter, 6', Kubota OrangeBH16-2G BH16 Series Rotary Cutter, 6', John Deere GreenBH16-2B BH16 Series Rotary Cutter, 6', New Holland Blue
Quick Hitch, Cat 1Standard Hitch, Cat 1
Shearbolt DrivelineDriveline Assembly with Clutch
Front Deflector KitRear BandFront ChainsRear Chains
50076083 40 lbs. $395
GROUP 3 PTO SELECTION
50053131 32 lbs. $252
50070867 36 lbs. $136
GROUP 4 ENCLOSURE SELECTION
NOTE: Safety shieldings are non-returnable items for all models.
50074732 42 lbs. $161
50072522 51 lbs. $295
50070831 10 lbs. $77
50072523 20 lbs. $65
679 lbs.679 lbs.679 lbs.
$2,025
$2,025
$2,025
679 lbs.
GROUP 2 HITCH SELECTION
50070861 39 lbs. $196
$2,025
Approx. Wt.
List Price
($US)Description
Model
Number
Prices F.O.B. Selma, Alabama SS3
Machine Prices and Specifications Price Revision January 2nd 2018
Standard & Quick Hitch, Category 2. For Category 1 standard, customer supplied hitchpins must be mounted inside hitch lugs.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS4
Blade Tip Speed 14,420 fpmWheels Laminated TireRecommended Tractor HP 50 - 70 (PTO)Safety Deflectors See enclosure selectionFive Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order from each group listed for the model you have selected.
Deflector kit is standard equipment. Must be used for all non-agricultural purposes or in areas where
the possibility of thrown objects that could be hazardous to persons or property exists.
Prices F.O.B. Selma, Alabama SS4
Machine Prices and Specifications Price Revision January 2nd 2018
Description
BH17-2R BH17 Series Single Spindle Rotary Cutter, 7', Bush Hog RedBH17-2O BH17 Series Single Spindle Rotary Cutter, 7', Kubota OrangeBH17-2G BH17 Series Single Spindle Rotary Cutter, 7', John Deere GreenBH17-2B BH17 Series Single Spindle Rotary Cutter, 7', New Holland Blue
Front Deflector KitRear BandFront ChainsRear Chains
BH17 Series Single Spindle 7' Rotary CutterBASIC UNIT SELECTION
Model
Number Approx. Wt.
961 lbs. $3,881
List Price
($US)
961 lbs. $3,881
961 lbs. $3,881
961 lbs. $3,881
NOTE: Safety shieldings are non-returnable items for all models.
500724475007473350072446
11 lbs.23 lbs.
45 lbs. $363
Driveline with slip clutch and tailwheel are included in above price.
GROUP 2 ENCLOSURE SELECTION
50070944 $100
45 lbs.
$82
$225
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS5Prices F.O.B. Selma, Alabama SS5
Machine Prices and Specifications Price Revision January 2nd 2018
Tailwheel Single Single Single or DualCutting Height 1-1/2" to 10-1/2" 1-1/2" to 10-1/2" 1-1/2" to 10-1/2"Cutting Capacity 3" diameter 3" diameter 3" diameter
Hitch
Deck Thickness 10 Gauge Steel 10 Gauge Steel 10 Gauge SteelSide Bands 1/4" x 13" 1/4" x 13" 1/4" x 13"
10' 8" (Single) 10' 1"(Double)
MODEL
Category 1 and 2 Standardand Quick Hitch
3-Point Category 1 and 2Standard and Quick Hitch
3-Point Category 1 and 2Standard and Quick Hitch
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS6
Side Bands 1/4" x 13" 1/4" x 13" 1/4" x 13"Gearbox 130 hp* (540 rpm) 130 hp* (540 rpm) 130 hp* (540 rpm only)Driveshaft ASAE Category 4 ASAE Category 4 ASAE Category 4Driveline Protection
Blade Holder Round Round RoundBlades 1/2" x 4", Heat Uplift 1/2" x 4", Heat Uplift 1/2" x 4", Heat UpliftBlade Tip Speed 14,600 fpm (540 rpm) 15,000 fpm (540 rpm) 14,450 fpm (540 rpm)Wheels Laminated Tire Laminated Tire Laminated TireRecommended Tractor HP 35 (PTO) 45 (PTO) 55 (PTO)
Safety Deflectors
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order from each group listed for the model you have selected.
Deflector kit is standard equipment. Must be used for all non-agricultural purposes or in areas where
the possibility of thrown objects that could be hazardous to persons or property exists.
Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard
Front & rear deflector kit,see enclosure selection
Front & rear deflector kit,see enclosure selection
Front & rear deflector kit,see enclosure selection
Prices F.O.B. Selma, Alabama SS6
Machine Prices and Specifications Price Revision January 2nd 2018
Description
BH25-2R BH25 Series Rotary Cutter, 5', Bush Hog RedBH25-2O BH25 Series Rotary Cutter, 5', Kubota OrangeBH25-2G BH25 Series Rotary Cutter, 5', John Deere GreenBH25-2B BH25 Series Rotary Cutter, 5', New Holland Blue
Deflector Kit, Front and RearSingle Row Chains, CompleteDouble Row Chains, CompleteFront Chain, Rear Band
Description
BH26-2R BH26 Series Rotary Cutter, 6', Bush Hog RedBH26-2O BH26 Series Rotary Cutter, 6', Kubota OrangeBH26-2G BH26 Series Rotary Cutter, 6', John Deere GreenBH26-2B BH26 Series Rotary Cutter, 6', New Holland Blue
Deflector Kit, Front and RearSingle Row Chains, CompleteDouble Row Chains, CompleteFront Chain, Rear Band
List Price
($US)
40 lbs.98 lbs.139 lbs.70 lbs.
List Price
($US)
OPTIONS
OPTIONS
992 lbs. $3,700
BH26 Series Rotary CutterBASIC UNIT SELECTION
Approx. Wt.
992 lbs. $3,700
992 lbs. $3,700992 lbs. $3,700
$51350070737$12950070735
GROUP 2 ENCLOSURE SELECTION
$26650073328$74550070738
77 lbs.159 lbs.106 lbs.45 lbs.
$3,173867 lbs. $3,173
$427$639$234
500707305007073150073327
GROUP 2 ENCLOSURE SELECTION
50070729 $112
Model
Number
Model
Number
BASIC UNIT SELECTION
$3,173867 lbs.
BH25 Series Rotary Cutter
Approx. Wt.
867 lbs. $3,173867 lbs.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS7
Description
BH27-2R BH27 Series Rotary Cutter, Single Tailwheel, 7', Bush Hog RedBH27-2O BH27 Series Rotary Cutter, Single Tailwheel, 7', Kubota OrangeBH27-2G BH27 Series Rotary Cutter, Single Tailwheel, 7', John Deere GreenBH27-2B BH27 Series Rotary Cutter, Single Tailwheel, 7', New Holland Blue
BH27D-2R BH27 Series Rotary Cutter, Dual Tailwheel, 7', Bush Hog RedBH27D-2O BH27 Series Rotary Cutter, Dual Tailwheel, 7', Kubota OrangeBH27D-2G BH27 Series Rotary Cutter, Dual Tailwheel, 7', John Deere GreenBH27D-2B BH27 Series Rotary Cutter, Dual Tailwheel, 7', New Holland Blue
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice SS9
Manual Ratchet BundleHydraulic Cylinder Bundle
GROUP 4 FRONT ENCLOSURE SELECTION
50055316 Single Row Front Chains 51 lbs.
GROUP 3 HEIGHT ADJUSTMENT SELECTION
181764830
$142
$316
$253
$394
NOTE: Safety shieldings are non-returnable items for all models.
50074883 Double Row Rear Chains 105 lbs.
GROUP 5 REAR ENCLOSURE SELECTION
69 lbs.Single Row Rear Chains50074891 $394
$505
50055329 Double Row Front Chains 90 lbs.
Prices F.O.B. Selma, Alabama SS9
MULTI-SPINDLERIGID DECK
ROTARY MOWERS
MULTI-SPINDLERIGID DECK
ROTARY MOWERS
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL SQ84T
Cutting Width 7' Driveshaft ASAE Category 3Overall Width 7' 3" Driveline Protection Slip ClutchOverall Length 6' 3" Blade Holder Oval TypeCutting Height 2" to 12" Blades 1/2 " x 4 " upliftCutting Capacity Up to 11/2 " diameter Blade Tip Speed 11,500 fpmHitch Category 1 with 9" offset Wheels Solid Rubber or Laminated TireDeck Thickness 11 Gauge Steel Recommended Tractor HP 35 - 50 (PTO)Side Bands 7-3/8" x 11 Gauge Steel Safety Deflectors Front & rear deflector kit standard
Gearbox
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order from each group listed for the model you have selected.
SQ84T Squealer Series Twin Spindle 7' Rotary Cutter
60 hp*, 1:1.85 Outboard:45 hp*, 1.1
WARNING:Deflector kit is standard equipment. Must be used for all non-agricultural purposes or in areas
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS1
Description
SQ84TRR SQ84T Series Rotary Cutter, 7', Bush Hog RedSQ84TRO SQ84T Series Rotary Cutter, 7', Kubota OrangeSQ84TRG SQ84T Series Rotary Cutter, 7', John Deere GreenSQ84TRB SQ84T Series Rotary Cutter, 7', New Holland Blue
Laminated Tire
SQ84T Squealer Series Twin Spindle 7' Rotary CutterBASIC UNIT SELECTION
Model Number Approx. Wt.
720 lbs. $4,998
List Price
($US)
720 lbs. $4,998
720 lbs. $4,998
NOTE: Safety shieldings are non-returnable items for all models.
720 lbs. $4,998
Driveline and front and rear safety deflectors are included in above price.
GROUP 2 TIRE SELECTION
78868 $346
Prices F.O.B. Selma, Alabama MS1
Machine Prices and Specifications Price Revision January 2nd 2018
Side Bands 7 ga. x 10"Gearbox (1 ea.) 140 hp* Center and (2 ea.) 75 hp* Outboards (540 rpm)Driveshaft ASAE Category 4Driveline Protection 2-Plate Slip ClutchBlade Holder OvalBlades 1/2" x 4" UpliftBlade Overlap 4.75"Blade Tip Speed 16,173 fpm (540 rpm)Wheels Laminated Tire
MODEL 2308
Category 1 and 2 Standard and Quick Hitch. Pull is self leveling.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS2
Blade Tip Speed 16,173 fpm (540 rpm)Wheels Laminated TireMinimum Tractor HP 35 (Pull), 45 (Lift)Safety Deflectors See enclosure selectionSafety Tow Chain Standard (Pull)Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order from each group listed for the model you have selected.
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists.
Prices F.O.B. Selma, Alabama MS2
Machine Prices and Specifications Price Revision January 2nd 2018
2308R
NOTE: Safety shieldings are non-returnable items for all models.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS3Prices F.O.B. Selma, Alabama MS3
Machine Prices and Specifications Price Revision January 2nd 2018
Cutting Width 9' 9"Transport Width 10' 3"Overall Width 10' 3"Length 9' 4" Lift, 13' PullAxle Suspension Rubber CushionCutting Height 2" to 12"Cutting Capacity 2" DiameterHitch Category 2 and 3 Standard and Quick Hitch. Pull is self leveling.Deck Thickness 11 Gauge SteelSide Bands 10" x 7 Gauge SteelGearbox (1 ea.) 120 hp* Center and (2 ea.) 90 hp* Outboards (540 rpm)Driveshaft ASAE Category 4Driveline Protection 4-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 4" UpliftBlade Overlap 3"Blade Tip Speed 15,778 fpm (540 rpm)
2010MODEL
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS4
Blade Overlap 3"Blade Tip Speed 15,778 fpm (540 rpm)Wheels Laminated and Aircraft Tires (See wheel selection)Minimum Tractor HP 40 (Pull), 60(Lift)Safety Deflectors See enclosure selectionSafety Tow Chain (Pull) StandardFive Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists. Use 5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must order from each group listed for the model you have selected.
Prices F.O.B. Selma, Alabama MS4
Machine Prices and Specifications Price Revision January 2nd 2018
Pull Bundle with CV Driveline*
*Tires not included in pull bundle. Make the appropriate selection from Group 6 Wheel Selection.
(ea.)
(ea.)
50043493 Front Single Row Chains 79 lbs. $266
GROUP 8 REAR ENCLOSURE SELECTION
GROUP 7 FRONT ENCLOSURE SELECTION
Laminated Tire, 20" 72 lbs. $194
50050727 Used Aircraft Tire, 29x9x15 75 lbs. $245
2010 Series Rotary Cutter, Round BladeHolder, 540 PTO
2010R
Heavy Duty Single Axle Arm Bundle
GROUP 6 WHEEL SELECTION (Pull Models Only)
294
GROUP 5 HEIGHT ADJUSTMENT SELECTION
89045 Hydraulic Cylinder Bundle 45 lbs. $333
1817 Manual Ratchet Bundle 15 lbs. $142
GROUP 4 AXLE SELECTION (Pull Only)
50044184 144 lbs. $609
GROUP 3 DRIVELINE SELECTION (Lift and Semi-Mount Models Only)
76981 Lift and Semi-Mount Driveline, 1-3/8-6, 540 PTO
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS5
50043491 Rear Metal Band 49 lbs. $113
50043495 Rear Single Row Chains 68 lbs. $238
GROUP 8 REAR ENCLOSURE SELECTION
NOTE: Safety shieldings are non-returnable items for all models.
Prices F.O.B. Selma, Alabama MS5
Machine Prices and Specifications Price Revision January 2nd 2018
3308
Cutting Width 8' 3"Transport Width 8' 10"Length (lift model, twin axles) 8' 9"Axle Suspension See axle selectionCutting Height 2" to 13"Cutting Capacity 2" DiameterHitch Category 1 and 2 Standard and Quick Hitch. Pull is self leveling.
Deck Thickness 10 Gauge Steel
Side Bands 1/4" x 12"Gearbox (1 ea.) 140 hp* Center and (2 ea.) 130 hp* Outboards (540 rpm)Driveshaft ASAE Category 4Driveline Protection 4-Plate Slip Clutch
Blade Holder Round
Blades 1/2" x 3 1/2" UpliftBlade Overlap 5"
MODEL
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS6
Blade Overlap 5"Blade Tip Speed 16,121 fpm @ 540 pto rpmWheels See wheel selectionMinimum Tractor HP 50 (lift), 40 (pull & semi-mount)Safety Deflectors See enclosure selectionSafety Tow Chain (Pull) Standard
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists. Use 5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must order from each group listed for the model you have selected.
Prices F.O.B. Selma, Alabama MS6
Machine Prices and Specifications Price Revision January 2nd 2018
* Lift and semi-mount bundles include driveline with slip clutch.** Pull bundle includes CV driveline with slip clutch and heavy duty axle.
Note: Selection is for pull model and heavy duty axle on lift and semi-mount models.
(ea.)
(ea.)
(ea.)
3308 Series Rotary CutterBASIC UNIT SELECTION
Model Number Description Approx. Wt.
List Price
($US)
3308R 1309 lbs. $5,3283308 Series Rotary Cutter, Round Pan,540 PTO
GROUP 3 AXLE SELECTION (Lift and Semi-Mount Models Only)
287 lbs. $1,148
GROUP 2 HITCH SELECTION
50075174 Lift Bundle* 125 lbs. $776
50075427 177 lbs. $584Twin Beam Axle with 15.5" Laminated TiresHeavy Duty Cushioned Axle with 15.5" Tires
GROUP 4 HEIGHT ADJUSTMENT SELECTION
89045 Hydraulic Cylinder Bundle 45 lbs. $333
15 lbs. $142
GROUP 5 WHEEL SELECTION (**Pull Models Only, 2 tires required)
294 Laminated Tire, 20" 72 lbs. $194
1817 Manual Ratchet Bundle
5007517550075176
Semi-Mount Bundle*Pull Bundle**
87 lbs.470 lbs.
$548
$2,774
50075173
50077775 75 lbs.Foam Filled Tire 25 x 7-18 $342
GROUP 6 FRONT ENCLOSURE SELECTION
Used Aircraft Tire, 29x9x15 75 lbs. $24550050727
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS7
NOTE: Safety shieldings are non-returnable items for all models.
50075424 Front Double Row Chains 110 lbs. $412
GROUP 7 REAR ENCLOSURE SELECTION
GROUP 6 FRONT ENCLOSURE SELECTION
50075423 Front Single Row Chains 83 lbs. $248
50075426 Rear Double Row Chains 95 lbs. $302
30 lbs. $92
50075425 Rear Single Row Chains 72 lbs. $202
50075503 Rear Metal Band
Prices F.O.B. Selma, Alabama MS7
Machine Prices and Specifications Price Revision January 2nd 2018
3308SH
Cutting Width 8' 3"Transport Width 8' 10"Length 9' 7"Axle Suspension Heavt Duty Axle With Rubber suspensionCutting Height 2" to 13"Cutting Capacity 2" DiameterHitch Category 1 and 2 Semi-Mount only. Offset 0" to 13" right of tractor center line.Deck Thickness 10 GaugeSide Bands 1/4" x 12"Gearbox (1 ea.) 140 hp* Center and (2 ea.) 130 hp* Outboards (540 rpm)Driveshaft ASAE Category 4Driveline Protection 4-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 3 1/2" UpliftBlade Overlap 5"Blade Tip Speed 16,121 fpm @ 540 pto rpmWheels Laminated Tire
MODEL
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS8
Wheels Laminated TireMinimum Tractor HP 40Safety Deflectors See enclosure selection
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists. Use 5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must order from each group listed for the model you have selected.
Prices F.O.B. Selma, Alabama MS8
Machine Prices and Specifications Price Revision January 2nd 2018
3308SH Series Rotary CutterBASIC UNIT SELECTION
Model Number Description Approx. Wt.
List Price
($US)
Included in Hitch Bundle
3308SH 1233 lbs. $5,573
GROUP 2 HITCH SELECTION
50075183 Swing Hitch Bundle, Includes Driveline 172 lbs. $1,086
3308SH Series Rotary Cutter, RoundBlade Holder, 540 PTO*
GROUP 3 DRIVELINE SELECTION
$248
50075424 110 lbs. $412
89045 45 lbs. $333
1817 15 lbs. $142Manual Ratchet Bundle
50075426 95 lbs. $302
NOTE: Safety shieldings are non-returnable items for all models.
Hydraulic Cylinder Bundle
GROUP 7 REAR ENCLOSURE SELECTION
50075503 30 lbs. $92
50075425 72 lbs. $202
Rear Metal Band
GROUP 6 FRONT ENCLOSURE SELECTION
50075423 83 lbs.
GROUP 4 AXLE SELECTION
50075173 287 lbs. $1,148
GROUP 5 HEIGHT ADJUSTMENT SELECTION (For All Axles)
Rear Single Row ChainsRear Double Row Chains
Front Single Row ChainsFront Double Row Chains
Heavy Duty Cushioned Axle with 15.5" Tires
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS9
NOTE: Safety shieldings are non-returnable items for all models.
Prices F.O.B. Selma, Alabama MS9
Machine Prices and Specifications Price Revision January 2nd 2018
Offset from Center 7' 10"Cutting Width 10' 6"Transport Width 10' 11"Overall Width 11' 1"Axle Suspension Rubber CushionCutting Height 2" to 13"Cutting Capacity 3" DiameterHitch Pull, Self LevelingDeck Thickness 10 Gauge SteelSide Bands 1/4" x 10"Gearbox (1) 210 hp* Center and (1) 210 hp* Outboard (540 rpm)Driveshaft ASAE Category 5Cross Shafts ASAE Category 5Driveline Protection 4-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 4" UpliftBlade Overlap 3"Blade Tip Speed 16,881 fpm (540 rpm)Wheels See wheel selectionMinimum Tractor HP 50 (Pull)Safety Deflectors See enclosure selection
Five Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists. Use 5/16" double row highway chains for all roadside mowing operations.
MODEL 3510-O
To receive a complete cutter, you must order from each group listed for the model you have selected.
Prices F.O.B. Selma, Alabama MS10
Machine Prices and Specifications Price Revision January 2nd 2018
Deck Thickness 10 Gauge SteelSide Bands 1/4" x 10"Gearbox (1) 210 hp* Center and (2) 210 hp* Outboards (540 rpm)Driveshaft ASAE Category 5 (540 PTO), ASAE Category 4 (1000 PTO Pull)Cross Shafts ASAE Category 5 Rubber Element with Category 4 ShearpinDriveline Protection 4-Plate Slip ClutchBlade Holder Round (540 PTO), Round or Bar (1000 PTO)Blades 1/2" x 4" UpliftBlade Overlap 3"Blade Tip Speed 15,242 fpm (540/1000 rpm)Wheels See wheel selectionMinimum Tractor HP 75 (Pull), 90 (Lift)
MODEL 3514
Category 2 and Category 3 Standard and Quick Hitch Pull, Self Leveling
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice MS14
Minimum Tractor HP 75 (Pull), 90 (Lift)Safety Deflectors See enclosure selectionHighway Light Kit StandardFive Year Limited Gearbox Warranty
*Gearbox rating based on field performance.NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
To receive a complete cutter, you must order a basic unit and then select one item from each of Groups 1- 8 in the ordering section. Additional equipment desired may be added to your order by making yourselection from the options list.
Deflector kit or chain shielding is standard equipment and must be used for all non-agricultural
purposes or in areas where the possibility of thrown objects that could be hazardous to persons or
property exists. Use 5/16" double row highway chains for all roadside mowing operations.
Prices F.O.B. Selma, Alabama MS14
Machine Prices and Specifications Price Revision January 2nd 2018
13514RS
13514SS
*If #50068369 axle is selected, you must select #294 tire from Group 6 Wheel Selection.**If #50068370 is selected, you may select either tire from Group 6 Wheel Selection.
GROUP 5 HEIGHT ADJUSTMENT SELECTION (For All Models)
90492 Hydraulic Cylinder Bundle 45 lbs. $368
GROUP 4 AXLE SELECTION (Pull Models Only)
50068369 Pull, Single Wheel Axle Arms (pair)* 162 lbs. $941
50076817 Rear Band Bundle, 3514, 13514 55 lbs. $193
50076819 Rear Single Row Chains,3514,13514
170 lbs. $573
GROUP 7 FRONT ENCLOSURE SELECTION
50076813 Front Single Row Chains,3514,13514
160 lbs. $532
GROUP 6 WHEEL SELECTION (Pull Models Only)
294 Laminated Tire, 20" 72 lbs. $194
50077775 Foam Filled Tire 25 x 7-18 75 lbs. $342
GROUP 5 HEIGHT ADJUSTMENT SELECTION (For All Models)
90492 Hydraulic Cylinder Bundle 45 lbs. $368
1817 Manual Ratchet Bundle 15 lbs. $142
Prices F.O.B. Selma, Alabama MS15
FLEX-WINGROTARY CUTTERS
Machine Prices and Specifications Price Revision January 2nd 2018
Transport Height* 5' 8"Transport Width** 6' 8"Overall Width 12' 8"Cutting Width 12'Length*** 13' 3"Axle Suspension Cushioned Rubber Bumper onEach Center Axle ArmCutting Height 2" to 14"Cutting Capacity 11/2 " DiameterHitch
Tongue Weight 1,086 lbs.Deck Thickness 10 Gauge SteelSide Bands 1/4" x 10"Gearbox 160 hp† Splitter Gearbox, 65 hp† Cutting GearboxesDriveshaft ASAE Category 4 (540 PTO)Driveline Protection (3) Multi-Plate Slip ClutchBlade Holder OvalBlades 1/2" x 3" Parallel UpliftBlade Overlap 6"Blade Tip Speed 14,464 fpm Center (540 rpm); 13,930 fpm Wings (540 rpm)Wing Flex 87⁰ Up to 22⁰ Down
MODEL 1812
Cast Swivel Clevis
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW1
Wing Flex 87⁰ Up to 22⁰ DownCenter Hydraulic Lift StandardWing Hydraulic Lift StandardAxle Tube Pivots Greaseable BushingsWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 50 (PTO)Jack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionFive Year Limited Gearbox Warranty
*Measured at maximum transport height. **Measured at outside of wing skids, folded.***Measured from hitch pin to axle spindle at transport height.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
NOT FOR COMMERCIAL APPLICATION
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 -5 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW1
Machine Prices and Specifications Price Revision January 2nd 2018
(ea.)
8 Tires(ea.)
(ea.)
1812R1 1812 Series Flex-Wing Rotary Cutter, OvalBlade Holder, 540 PTO, No Deck Rings
2554 lbs. $12,229
1812 Series Flex-Wing Rotary CutterBASIC UNIT SELECTION
Model
Number Description Approx. Wt.
List Price
($US)
50072771 Dual Axle Arms (4 Tires) 38 lbs. $331
Model includes center and wing hydraulic cylinders and hoses, cast swivel hitch, tow chain, wingdrivelines, and CV, ASAE Category 4 driveline.
Machine Prices and Specifications Price Revision January 2nd 2018
Transport Height* 7'Transport Width** 7' 7"Cutting Width 15'Length*** 15' 2"Axle Suspension Cushioned Rubber on Center AxleCutting Height 2" to 14"Cutting Capacity 21/2 " DiameterHitch
Tongue Weight 1,623 lbs.Deck Thickness 10 Gauge SteelSide Bands 1/4" x 12"Gearbox 160 hp† Splitter Gearbox, 130 hp† Cutting GearboxesDriveshaft Main: See driveline selection Wings: ASAE Category 4Driveline Protection (3) Multi-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 4" Parallel UpliftBlade Overlap 6"Blade Tip Speed 15,000 fpm (540 rpm); 15,600 fpm (1000 rpm)Wing Flex 87⁰ Up to 22⁰ DownCenter Hydraulic Lift Standard
MODEL 1815
See hitch selection
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW3
Center Hydraulic Lift StandardWing Hydraulic Lift StandardAxle Tube Pivots Greaseable BushingsWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 60 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionFive Year Limited Gearbox Warranty
*Measured at maximum transport height. **Measured at outside of wing skids, folded.***Measured from hitch pin to axle spindle at transport height.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 6 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
NOT FOR COMMERCIAL APPLICATION
Prices F.O.B. Selma, Alabama FW3
Machine Prices and Specifications Price Revision January 2nd 2018
Single Row Chains, Front and RearDouble Row Chains, Front and Rear
OPTIONS
$1,552
50077430
Grass Distribution KitEZ-Mount Driveline Holder (Please Contact
Service Parts to Place Order)8 lbs. $91
Single Axle Arms (2 Tires) 19 lbs.
GROUP 6 ENCLOSURE SELECTION
$194
$1,164
$342
$166
GROUP 4 WING AXLE SELECTION
Prices F.O.B. Selma, Alabama FW4
Machine Prices and Specifications Price Revision January 2nd 2018
Transport Height* 7' 3"Transport Width** 8' 2"Cutting Width 15'Axle Suspension Cushioned Springs at Each WheelCutting Height 2" to 14"Cutting Capacity
Hitch
Tongue Weight
Deck Thickness
Side Bands 1/4" x 12"Gearbox 250 hp† Splitter Gearbox, 210 hp† Cutting GearboxesDriveshaft Main: See driveline selection Wing: ASAE Category 5 4Driveline Protection (3) Multi-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 4" Parallel UpliftBlade Overlap 6"Blade Tip Speed
Wing Flex 87⁰ Up to 22⁰ DownCenter Hydraulic Lift StandardWing Hydraulic Lift StandardAxle Tube Pivots Greaseable BushingsAxle Arm Pivots GreaseableWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 60 (PTO)Grass Baffles Optional
MODEL 2215
3 1/2" DiameterSee hitch selection1705 lbs.10 Gauge (Center and wings)
16,286 fpm (540 rpm); 16,000 fpm (1000 rpm)
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW5
Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2-6 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW5
Machine Prices and Specifications Price Revision January 2nd 2018
2215RR1
(ea.)
6 Tires8 Tires #N/A $1,552
50075401 Laminated Tire, 25" 85 lbs. $264
GROUP 5 WHEEL SELECTION
294 #N/A #N/A $194
#N/A $1,164
50070267 Dual Axle Arms (4 Tires) 126 lbs. $1,179
50076588 Tandem Walking Axle Arms (4 Tires) 209 lbs. $1,658
50076588 Tandem Walking Axle Arms (4 Tires) 209 lbs. $1,658
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW7
Axle Tube Pivots Greaseable BushingsWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 60 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 6 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW7
Machine Prices and Specifications Price Revision January 2nd 2018
NOTE: Safety shieldings are non-returnable items for all models.
50077775
Used Aircraft Tire, 29x9x15
Foam Filled Tire 25 x 7-18
Single Row Chains, Front and Rear
OPTIONS
50070395 59 lbs. $277
GROUP 6 ENCLOSURE SELECTION
50070418 185 lbs. $748
50070419 310 lbs.
6 Tires
432 lbs. $1,1646 Tires
Grass and Crop Distribution BafflesEZ-Mount Driveline Holder (Please Contact Service
Parts to Place Order)
50075401 Laminated Tire, 25" 85 lbs. $264
5 Tires 425 lbs. $1,320
6 Tires 510 lbs. $1,584
450 lbs. $1,470
75 lbs. $342
50050727 75 lbs. $245
5 Tires 375 lbs. $1,225
50072403 Used Aircraft Tire, 27.75x8.75-24PR 80 lbs. $267
5 Tires 400 lbs. $1,335
6 Tires 480 lbs. $1,602
Prices F.O.B. Selma, Alabama FW8
Machine Prices and Specifications Price Revision January 2nd 2018
Transport Height* 7' 3"Transport Width** 8' 2"Cutting Width 15'Axle Suspension Cushioned Springs at Each WheelCutting Height 2" to 14"Cutting Capacity 4" DiameterHitch
Tongue Weight 1,866 lbs.Deck Thickness 11 Gauge Steel (Center Top); 7 Gauge Steel (Center Bottom, Wing)Side Bands 1/4" x 12"Gearbox 250 hp† Splitter Gearbox, 225 hp† Cutting GearboxesDriveshaft Main: See driveline selection Wings: ASAE Category 4Driveline Protection (3) Multi-Plate Slip ClutchBlade Holder RoundBlades 1/2" x 4" Parallel UpliftBlade Overlap 6"Blade Tip Speed 16,286 fpm (540 rpm); 16,391 fpm (1000 rpm)Wing Flex 87⁰ Up to 22⁰ DownCenter Hydraulic Lift StandardWing Hydraulic Lift StandardAxle Tube Pivots Greaseable BushingsAxle Arm Pivots GreaseableWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 60 (PTO)
MODEL 2815
Self leveling Perma-Level®
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW9
Minimum Tractor HP 60 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 6 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW9
Machine Prices and Specifications Price Revision January 2nd 2018
2815RR3
12815R3
12815RR3
(ea.)
6 Tires8 Tires
(ea.)
Assembly Included in List Price
50076588 Tandem Walking Axle Arms (4 Tires) 209 lbs.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW11
Wheels See wheel selectionMinimum Tractor HP 60 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 7 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW11
Machine Prices and Specifications Price Revision January 2nd 2018
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW13
Minimum Tractor HP 60 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 7 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW13
Machine Prices and Specifications Price Revision January 2nd 2018
3815RR2
13815R2
13815RR2
(ea.)
6 Tires8 Tires
(ea.)
3815R2 4466 lbs. $20,340
4675 lbs. $20,971
3815 Series Flex-Wing Rotary CutterBASIC UNIT SELECTION
Model Number Description Approx. Wt.
3815 Flex-Wing Series Rotary Cutter, Round BladeHolder, 540 PTO, No Deck Rings3815 Flex-Wing Series Rotary Cutter, Round BladeHolder, 540 PTO, With Deck Rings
List Price
Model includes center and wing hydraulic cylinders and hoses, tow chain and wing drivelines.Assembly Included in List Price
GROUP 2 HITCH SELECTION
50072803 Ball Hitch with 2-5/16" Ball 45 lbs. $312
4466 lbs. $20,340
4675 lbs. $20,971
3815 Flex-Wing Series Rotary Cutter, Round BladeHolder, 1000 PTO, No Deck Rings3815 Flex-Wing Series Rotary Cutter, Round BladeHolder, 1000 PTO, With Deck Rings
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW15
Wheels See wheel selectionMinimum Tractor HP 70 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 7 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW15
Machine Prices and Specifications Price Revision January 2nd 2018
4815RR1
14815RR1
(ea.)
6 Tires8 Tires
(ea.)
510 lbs. $1,584
432 lbs. $1,164
576 lbs. $1,552
50075401 Laminated Tire, 25" 85 lbs. $264
50076586 Tandem Walking Axle Arms (4 Tires) 392 lbs. $1,824
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW17
Center Hydraulic Lift StandardWing Hydraulic Lift StandardAxle Tube Pivots Greaseable BushingsAxle Arm Pivots Greaseable BushingsWing Adjuistment Greaseable TurnbucklesWheels See wheel selectionMinimum Tractor HP 90 (PTO)Grass Baffles OptionalJack Stand StandardSafety Tow Chain StandardSafety Deflectors See enclosure selectionSix Year Limited Gearbox Warranty
*Measured at maximum transport height.**Measured at outside of wing skids.
†Gearbox rating based on field performance.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in areas
where the possibility of thrown objects that could be hazardous to persons or property exists. Use
5/16" double row highway chains for all roadside mowing operations.
To receive a complete cutter, you must include a basic unit and items from Groups 2 - 7 in the orderingsection. Additional equipment desired may be added to your order by making your selection from theoptions list.
Prices F.O.B. Selma, Alabama FW17
Machine Prices and Specifications Price Revision January 2nd 2018
Machine Prices and Specifications Price Revision January 2nd 2018
2820 Series Flex-Wing Rotary Cutter (Continued )
Note:
50074199 38 Inch Row Crop Spacing Wheel Spindle Kit for duals.Kit places both center-section inside tires 3 inchestoward the center of cutter to move tire off-center of row.Location is best with #294 laminated tire. Order throughService Parts
GROUP 7 ENCLOSURE SELECTION
50074153 Single Row Chains, Front and Rear 239 lbs. $1,500
50074152 Double Row Chains, Front and Rear 395 lbs. $2,064
SR1 and S1 base units include a straight blade bar with (2) uplift blades and (2) flat blades
per cutting circle.
NOTE: Safety shieldings are non-returnable items for all models.
50073131 Field Conversion Kit, Single Wing Axle to Dual Axles.Order Through Service Parts. Order (1) kit per wing.Also order tire of choice.
OPTIONS
50074156 Grass Distribution Baffles 170 lbs. $357
50074155 Shredder Kit for 2820 Flex-Wing Series Rotary Cutter,Models SR1 and S1. Adds 2nd blade bar and (2) upliftblades to each cutting circle of SSR-1 model for finershredding.
288 lbs. $1,189
50077430 EZ-Mount Driveline Holder (Please Contact Service
Parts to Place Order)8 lbs. $91
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice FW19Prices F.O.B. Selma, Alabama FW19
BOOM MOWERS
Machine Prices and Specifications Price Revision January 2nd 2018
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice BM1
5' 4" 7' 3" 8' 2"Standard Standard Standard Standard
FLAT HEAD RMB1445-1 RMB1660-1 RMB1865-1 PT5-2 Powertrim
ROTARY HEAD RMB1445-1 RMB1660-1 RMB1865-1
Cutting Capacity
Cutting Width
CUTTER BAR RMB1445 (only) RMB1660 RMB1865-1/1865E-1
Cutting CapacityCutting Width
NOTE:
HOW TO ORDER:
RMB Series mowers are to be used only on tractors equipped with cabs. For rotary mower heads, protective screeen
material must be installed.
To receive a complete cutter, for RMB models you must include a basic unit and the appropriate head option(s) fromGroup 2, 3 or 4 in the ordering section. For the PT5 model, make your basic unit selection, which comes standard with asickle bar head. No head selection is necessary. Additional equipment desired may be added to your order by makingyour selection from the options list.
16' 1"
17' 5"
22' 4"
7' 2"
5' 7"
10' 2"
Maximum Depth, 45⁰
HEAD SELECTION CHART
Minimum Tractor HP/ Weight 45 hp/4410 lbs. 60 hp/6614 lbs. 65 hp/7716 lbs. Not Available for Use onThis Model
Maximum Height, Horizontal (B)
Maximum Height, Horizontal (C)
Maximum Height, Vertical (D)
13' 2"
13' 5"
13' 9"
14' 6"
15' 9"
20' 8"
Rotor/Knife Super Cut/UniversalSuper Cut/F91Competition or Multi-CutCompetition
For rotary head, protective screen materials supplied must be installed.
50071904 $4,985
GROUP 3 FLAILHEAD SELECTION
50071277
RMB1865 Rear Mounted Boom Series Rotary Cutter with QuickDetach Cable Controls and Light KitRMB1865E [Electronic Controls] Rear Mounted Boom Series RotaryCutter with Quick Detach Cable Controls and Light KitPowertrim Rear Mounted Boom Series Rotary Cutter with FlowControl Valve Kit, Sickle Bar Head and One Set of Hydraulic Remotes
RMB1445 Rear Mounted Boom Series Rotary Cutter with QuickDetach Cable Controls and Light KitRMB1660 Rear Mounted Boom Series Rotary Cutter with QuickDetach Cable Controls and Light Kit
List Price ($US)
$15,049
$18,265
$19,904
$23,181
$10,450
Model Number
PT5-2 Powertrim
RMB1445-1, RMB1660-1, RMB1865-1
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice BM2
RMB1660-1, RMB1865-1, RMB1865E-1
RMB1445-1
RMB1660-1, RMB1865-1, RMB1865E-1
RMB1445-1
RMB1660-1, RMB1865-1, RMB1865E-1
21604.02 $381
50068500 $546
50068502 $502
50068503
Lift Float KitSkid Kit (Supercut Flailhead)Skid Kit (Multixcut Flailhead)Side Wheel Kit (For use with Rotary Head Only
Side Bands 10 Gauge SteelDriveshaft ASAE Category 4, 540 or 1000 rpmBlade Holder RoundBlades 1/2" x 3" Double EdgeBlade Tip Speed 17,300 fpm (540 rpm)Blade RPMBlade Rotation Direction Clockwise as Shipped, but ReversibleCutter Head Movement 90⁰ Up to 85⁰ DownMaximum Extenion of Cutter Head 145" From Tractor Center LineExtension Arm Travel 311/4 "Minimum Tractor Weight 6000 lbs.Minimum Tractor Lift Capacity 3200 lbs. at 24" Behind Lift PinsHydraulic Pump Mounting Machine Only, PTO DrivenHydraulic Oil Capacity 35 gal., Factory FilledHydraulic Oil Flow Capacity 24 gpmOverload Protection Hydraulic Relief ValveCounterweight 275 lbs.Standard Weight 1675 lbs.
MODEL SM60
Maximum Distance Center Hitch to
Outside of Cutter
1100
10 Gauge Steel
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice BM3
Standard Weight 1675 lbs.Minimum Tractor HP 540 rpm (PTO)Safety Deflectors See enclosure selectionOne Year Limited Pump/Motor Warranty
NOTICE: PTO adapter must not be used in any application.
WARNING:
HOW TO ORDER:
Freight NOT included in list price
SM160R-03
GROUP 2 HOSE KIT SELECTION
SM60R-03
$785
$635
1675 lbs.
1675 lbs.
SM60 Series Sidemount Ditch Bank Mower with All-Hydraulic Operation, 540 rpmSM60 Series Sidemount Ditch Bank Mower with All-Hydraulic Operation, 1000 rpm
$10,596
$10,596
$22965466 Hose Kit
For Use with Tractors Equipped with Two Remote Outlets
GROUP 3 ENCLOSURE SELECTION
86809 Chain Kit, Front and Rear 170 lbs.
NOTE: Safety shieldings are non-returnable items for all models.
OPTIONS (Shipped Separately)
86805 Tail Wheel Assembly for Main Frame 324 lbs.79038 Side Gauge Wheel with Laminated Tire 70 lbs. $453
Approx. Wt.
List Price
($US)
Model
Number
Chain shielding is standard equipment and must be used for all non-agricultural purposes or in
areas where the possibility of thrown objects that could be hazardous to persons or property
exists.
To receive a complete cutter, you must include a basic unit and items from Groups 2 and 3 in theordering section. Additional equipment desired may be added to your order by making your selectionfrom the options list.
SM60 Ditch Bank Mower Series Rotary CutterBASIC UNIT SELECTION
Description
Prices F.O.B. Selma, Alabama BM3
CONSTRUCTION
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
1405 lbs. (No Tilt Axle) 1525 lbs. (No Tilt Axle) 1580 lbs. (No Tilte Axle)
760 lbs. 760 lbs. 760 lbs.
Depth of Box 39" 39" 39"
5" Below Grade 5" Below Grade 5" Below Grade
Dump Clearance 21" 21" 21"
7" 75/8 " 81/4 "
Maximum Tilt Angle 31/2 ⁰ 31/2 ⁰ 31/2 ⁰
Tongue Construction 4" x 4" x 1/4" TubingSide Plate Construction 3/8" x 245/16 " High x 393/4 " DeepMoldboard Construction 1/4" x 241/4 " High When FormedCutting Edge 1/2" x 6" Reversible & Replaceable
3" x 3" x 5/16" Angle Plus a 1/4" Moldboard = 9/16" at the Cutting Edge
DSP12
Maximum Cutting
Depth
Model Color Unit Color
DSP Series Pull Dirt ScraperDSP8 DSP10
Weight with Weight
Box (Without Material
in Weight Box)
Maximum Weight of
Material in Weight Box
Maximum Tilt Depth to
the Right
Cutting Edge
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS1
3" x 3" x 5/16" Angle Plus a 1/4" Moldboard = 9/16" at the Cutting EdgeTires New 9.5L x 15 8-PLY RIB TL on 5-Bolt Rim with 5.5” Bolt Center
20 mph 20 mph 20 mph31/2 " x 8" ASAE 31/2 " x 8" ASAE 31/2 " x 8" ASAE31/2 " x 8" ASAE 31/2 " x 8" ASAE 31/2 " x 8" ASAE
HOW TO ORDER:
Color
DSP8-01 See Table AboveDSP10-01DSP10-xx See Table AboveDSP12-01DSP12-xx See Table Above
50072350 $307
$2,091
Weight Box, No Weights Included (DSP8 Series Only)Weight Box, No Weights Included (DSP10 Series, DSP12 Series)
OPTIONS
50074757 $295
5007471350072336
GROUP 2 TILT PREFERENCE SELECTION (Must Choose One)
The DSP Series Dirt Scraper is available as a pull-type implement only. To receive a completeunit, you must indicate your choice of basic unit, including your choice of model color from the chartabove, and make a selection from Group 2 Tilt Preference Selection. Additional equipment desiredmay be selected from the Options Section at the bottom of this page. Each unit selected from thisordering page is shipped in one crate with the tongue, tailwheels and options to be assembled bythe dealer.
BASIC UNIT SELECTION
Model Number Description List Price
Lift Cylinder
Tilt Cylinder
Cutting Edge
Maximum Transport Speed
Prices F.O.B. Selma, Alabama CS1
Machine Prices and Specifications Price Revision January 2nd 2018
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS2
Boom 27/8 " Tubing 31/2 " Tubing
Maximum PTO HP 45 65 95Five Year Limited Gearbox Warranty
NOTE: Category 2 conversion bushings are not supplied with PHD2402 and PHD2403 models.
HOW TO ORDER:
31/2 " Tubing With ReinforcingHitch Rib
To receive a complete unit, select a model from the Base Unit section and an auger from Group 2 ofthe ordering section below. Price of a complete unit is the list price for the base unit plus the list pricefor the auger selected. Optional desired equipment for these units may be selected from the Optionslist in the ordering section.
Prices F.O.B. Selma, Alabama CS2
Machine Prices and Specifications Price Revision January 2nd 2018
Approx. Wt. List Price
PHD2401 PHD Series Utility Post Hole DiggerPHD2402 PHD Series Agricultural Post Hole DiggerPHD2403 PHD Series Industrial Post Hole Digger
Approx. Wt. List Price
Standard Duty Augers - Fish Tail Point (Replaceable)
Heavy Duty Augers - Aggressor Point (Replaceable)
82 lbs.
109 lbs.
00780371
00780372
$505
$590
18" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth (May Not BeUsed on PHD2401)24" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth (May Not BeUsed on PHD2401)
6" Semi-Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth9" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth
57 lbs.
00780367
00780368
00780369
42 lbs.
12" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth
64 lbs.
12" Double Flight Auger, Standard Duty, Fish Tail Point(Replaceable), With 42" Maximum Digging Depth
37 lbs.
46 lbs. $297
50072105
GROUP 2 AUGER SELECTION
22 lbs.50072104
Partl Number
$2859" Double Flight Auger, Standard Duty, Fish Tail Point(Replaceable), With 42" Maximum Digging Depth
Description
$286
$339
$355
50072106
6" Semi-Double Flight Auger, Standard Duty, Fish Tail Point(Replaceable), With 42" Maximum Digging Depth
$1,047
$1,394
$1,813
$237
160 lbs.
PHD2401, PHD2402, PHD2403 Post Hole DiggerBASIC UNIT SELECTION
Model Number Description
206 lbs.210 lbs.
PHD2401
PHD2402 PHD 2403
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS3
Parking Stand Kit for PHD 2401,PHD2402Parking Stand Kit for PHD2403Hydraulic Down Force Kit for PHD2401Hydraulic Down Force Kit for PHD2402Hydraulic Down Force Kit for PHD2403
12" Auger Extension, For Use on Standard Duty Augers Only
01A01030 7" Auger Extension, For Use on Heavy Duty Augers Only
01A01040 14" Auger Extension, For Use on Heavy Duty Augers Only 7 lbs.
50072108 12 lbs.50072111 13 lbs.
50072110 40 lbs.50072109
50072107
50072112 42 lbs.50068115
4 lbs.
82 lbs.
109 lbs.
OPTIONS
00780371
00780372
$505
$590
18" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth (May Not BeUsed on PHD2401)24" Double Flight Auger, Heavy Duty, Aggressor Point(Replaceable), With 48" Maximum Digging Depth (May Not BeUsed on PHD2401)
$219
$279
Bear Claw Auger Point Assembly, For Use on Standard DutyAugers Only
39 lbs. $612
16 lbs. $225
$153
$167
$612
$598
$119
PHD2401
PHD2402 PHD 2403
Prices F.O.B. Selma, Alabama CS3
Machine Prices and Specifications Price Revision January 2nd 2018
Skid Steer Universal,Loader Bucket, Euro StyleQuick Attach
Skid Steer Universal,Loader Bucket, Euro StyleQuick Attach
Skid Steer Universal,Loader Bucket, Euro StyleQuick Attach
Maximum System
Pressure
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS4
Two Year Limited Warranty
Freight NOT included in list price
NOTICE:
HOW TO ORDER:The PHDHF Series digger is priced as a basic unit with a choice of mounting kit bundle, auger, andoptions. In order to receive a complete unit, you must specify the basic unit, your selection of mountingkit from Group 2, and selection of auger from Group 3. Hydraulic hose is included. Additional equipmentdesired may be added to your order by making your selection from the Options list.
PHDHF Series diggers are "Farm-Ranch" type, designed for use with tractor front end loaders or small skid
steer loaders. Mounting brackets with frames offset to the right are designed for use on a tractor front end
loader to provide visibility of the auger.
Prices F.O.B. Selma, Alabama CS4
Machine Prices and Specifications Price Revision January 2nd 2018
PHDHF15
PHDHF20
PHDHF30
* Requires drilling two holes in bucket. (Hoses not included.)**
HSDA Augers (Soil, Clay, Loose Rock), 48" Long
Mounting brackets with frames offset to the right are designed for use on a tractor front end loader toprovide visibility of the auger.
Planetary with Reversible Motor Planetary with Reversible Motor
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS6
10 - 20 gpm 15 - 30 gpm 20 - 35 gpm
3000 psi 3000 psi 3000 psi
Digging Depth 48" 48" 48"
Drive Protection Hydraulic Relief Valve Hydraulic Relief Valve Hydraulic Relief ValveHydraulic Hoses 1/2" x 108" 1/2" x 108" 1/2" x 108"
Five Year Limited Warranty
NOTICE:
HOW TO ORDER:
Recommended Hydraulic
Flow
Maximum System
Pressure
PHDHC Series diggers are "Construction-Contractor" type, designed for use with skid steer loaders,
tractor loader backhoes, and mini-excavators.
The PHDHC Series digger is priced as a basic unit with a choice of mounting kit bundle, auger, andoptions. In order to receive a complete unit, you must specify the basic unit, your selection ofmounting kit from Group 2, and selection of auger from Group 3. Additional equipment desired maybe added to your order by making your selection from the Options list.
Freight NOT included in list price
Prices F.O.B. Selma, Alabama CS6
Machine Prices and Specifications Price Revision January 2nd 2018
Backhoe and Mini-Excavator (See instructions at end of Ordering Section)
PHDHC20 Planetary Drive Post Hole Digger for SystemsDelivering 10 - 20 GPM Hydraulic Flow, 2008 ft-lbsTorque at Maximum System Pressure (3000 psi)
211 lbs. $2,752
Skid Steer
00776624 Mounting Kit for Case 580, 580E, 580SE00776625 Mounting Kit for Case 780
00776628 Mounting Kit for Deere 510; 710B, C, D
PHDHC30 211 lbs. $2,900
PHDHC35 Planetary Drive Post Hole Digger for SystemsDelivering 20 - 35 GPM Hydraulic Flow, 3582 ft-lbsTorque at Maximum System Pressure (3000 psi)
211 lbs. $3,140
GROUP 2 MOUNTING KIT SELECTION
32 lbs. $361
32 lbs. $361
PHDHC Construction-Contractor Series Post Hole Diggers
Model Number Description Approx. Wt. List Price
Planetary Drive Post Hole Digger for SystemsDelivering 15 - 30 GPM Hydraulic Flow, 2937 ft-lbsTorque at Maximum System Pressure (3000 psi)
50074571
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS7
*
PHDHC Series Post Hole Diggers Continued on Next Page
If mounting to a tractor front end loader, use mounting kits shown in PHDHF Series price sheets.
Mounting kits for most backhoe and excavator models are available. See instructions at the end of this
ordering section for backhoe or excavator models not listed above.
00776629 Mounting Kit for Deere 9450, 9550, 401C32 lbs. $361
32 lbs. $361
Mounting Kit for Deere 310SE, 410E00776630
00776628 Mounting Kit for Deere 510; 710B, C, D
32 lbs. $361
32 lbs. $36100788379 Mounting Kit for Kubota KX9100776631 Mounting Kit for Cat 410, 416, 426
Mounting brackets with frames offset to the right are designed for use on a tractor front end loader to providevisibility of the auger.
Case, Ford, JCB, John Deere, and CAT are trade names and/or registered trademarks which are the intellectualproperty of the entity listed or of the entity's successor(s). These names are used only to clarify the identificationof skid steer loaders.
32 lbs. $361
Prices F.O.B. Selma, Alabama CS7
Machine Prices and Specifications Price Revision January 2nd 2018
PHDHC Series Post Hole Diggers (Continued)
Partl Number Description Approx. Wt. List Price
T-Post Puff Auger (Solid Rock)
2" Auger
HSDA AUGERS (Soil, Clay, Loose Rock)
6" Auger9" Auger12" Auger18" Auger24" Auger30" Auger36" Auger9" x 18" Tree Auger12" x 24" Tree Auger18" x 36" Tree Auger
HSRA AUGERS (Loose Rock, Solid Rock, Concrete)
4-1/2" Auger6" Auger
HRAD AUGERS (Soil, Hard Clay, Loose or Solid Rock, Concrete)
(See Group 2 Mounting Kit Selection for Weight and Price)
Step 1:Step 2: Measure the width of the backhoe or excavator dipper (outer boom section) at the connection point.Step 3: Measure the pin diameter required to connect the digger to the backhoe or excavator.Step 4:
PHDHC Seies Posthole Diggers Continued on Next Page
Choose PHDHC Series digger that matches the hydraulic flow and pressure of the backhoe or excavator.
57 lbs.80 lbs.
$285
$475
$560
395 lbs.00776649
007766540077665500776656
If the dipper width and pin diameter are the same as those listed in the chart below, order the part number thatcorresponds. If part number is not shown for the size you need, contact Bush Hog Customer Service Departmentwith your dipper width and pin diameter information so they can determine availability.
$2,225
$2,555
$2,940
$3,618
33 lbs.
201 lbs.291 lbs.
OPTIONS (Dealer Installed)
007766460077664700776648 340 lbs.
Prices F.O.B. Selma, Alabama CS8
Machine Prices and Specifications Price Revision January 2nd 2018
PHDHC Series Posthole Diggers (Continued )
DIPPER WIDTH & PIN DIAMETERS FOR MOUNT KITS LISTED IN GROUP 2 MOUNTING KIT SELECTION
Typical Application
10" 13/4 " Case 580, 580E, 580SE8" 21/2 " Case 7808" 13/4 " Ford CL55, 555 Series; Deere 12, B, C; 410A, B, C, D; 9300, 9305
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL AGR60 AGR72
Overall Depth 25", closed 25", ClosedOverall Height 373/4 " 373/4 "Overall Width 5' 6'Useable Depth N/A N/AUsable Open Height 31" 31"Usable Width (inside end plates) 5' 6'Roll Back Angle N/A N/AWeight 372 lbs. 409 lbs.Number of Teeth 5 5Attachment Method Universal Skid Steer Quick Attach, Euro or John DeereMaximum Tractor Hp 40 40Paint Color See Paint Color Chart Below
HOW TO ORDER: The AGR Series Grapple is priced as a complete unit. Select your desired model from the BasicUnit Selection offered. Indicate your choice of model color from the chart below. Note: The
AGR60JD and the AGR72JD models are available in green only. Do not make a color
selection if you are ordering either of these two models.
Freight NOT included in list price
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice CS13
01 Bush Hog Red02 Bush Hog Black03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
AGR Series Grapple
Description
agr60ss-01AGR60SS-xx Ag Grapple, Skid Steer, 60"AGR60E-01AGR60E-xx Ag Grapple, Euro, 60"
AGR60JD Ag Grapple, John Deere, 60"
AGR72SS-01AGR72SS-xx Ag Grapple, Skid Steer, 72"agr72e-01AGR72E-xx Ag Grapple, Euro, 72"
AGR72JD Ag Grapple, John Deere, 72"
Model Color
Indicator Unit Color
All units, with the exception of the AGR60JD and the AGR72JD,are available in the following colors:
BASIC UNIT SELECTION
Model
Number Approx. Wt.
List Price
($US)
372 lbs. $1,886
409 lbs. $2,200
409 lbs. $2,163
409 lbs. $1,981
372 lbs. $1,945
409 lbs. $2,107
Prices F.O.B. Selma, Alabama CS13
Machine Prices and Specifications Price Revision January 2nd 2018
BRGR Series
BGR Series
With Teeth Without Teeth
Model Number BGR72T BGR84T BGR72 BGR84 BRGR72 BRGR84
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL CRB48 CRB60 CRB72
Maximum Tractor HP 24 24 24Hitch ASAE Category 1 Standard & Quick HitchMoldboard Width 48" 60" 72"Moldboard Height 12" x 1/4"Adjustment Angles 15⁰ & 30⁰ Forward & Reverse
HOW TO ORDER:
Color
CRB48-01 Compact Series Rear Blade, 4' See Table AboveDescription
CRB48-xx 136 lbs. $493
Approx. Wt.
List Price
($US)
Model Color
Indicator Unit Color
150 lbs. $528
The Compact Series Rear Blade is available as a lift-type implement only. It is priced as a complete unitand is shipped fully assembled. Indicate your choice of model color from the chart above.
CRB Series Compact Rear Blade
BASIC UNIT SELECTION
Model
Number
Freight NOT included in list price.
Compact Series Rear Blade Compact Series Box Blade
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS1
CRB48-01 Compact Series Rear Blade, 4' See Table AboveCRB60-01 CRB60-xx Compact Series Rear Blade, 5' See Table AboveCRB72-01 CRB72-xx Compact Series Rear Blade, 6' See Table Above
MODEL CBX48 CBX60
Maximum Tractor HP 24 24Hitch ASAE Category 1 Standard & Quick HitchMoldboard Width 48" 60"Box Depth 12" 12"Number of Scarifier Teeth 4 5Number of Blades (2) Blades, Bolt-On Reversible Cutting Edge
HOW TO ORDER:
MODEL Color
CBX48-01 Compact Series Box Blade, 4' See Table AboveCBX60-01 CBX60-xx Compact Series Box Blade, 5' See Table Above258 lbs. $888
Description Approx. Wt.
CRB48-xx 136 lbs. $493
List Price
($US)
CBX48-xx 248 lbs. $793
Freight NOT included in list price.
CBX Series Compact Box Blade
The Compact Series Box Blade is available as a lift-type implement only. It is priced as a complete unitand is shipped fully assembled.
150 lbs. $528
164 lbs. $579
Prices F.O.B. Selma, Alabama LS1
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL CLR48 CLR60
Maximum Tractor HP 24 24Hitch ASAE Category 1 Standard & Quick HitchRake Pivot 18⁰ & 36⁰ 18⁰ & 36⁰
Tine Spacing 1" 1"
HOW TO ORDER:
Color
CLR48-01 See Table AboveCLR60-01 CLR60-xx See Table Above
Model
NumberApprox. Wt.
List Price
($US)
Model Color
Indicator Unit Color
CLR Series Compact Landscape Rake
The Compact Series Landscape Rake is available as a lift-type implement only. It is priced as acomplete unit and is shipped fully assembled. Indicate your choice of model color from the chart above.
BASIC UNIT SELECTION
Description
Freight NOT included in list price.
CRG Series Compact Road Grader
CLR48-xx Compact Series Landscape Rake, 4' 126 lbs. $669
Compact Series Landscape Rake, 5' 143 lbs. $723
Compact Series Landscape Rake Compact Series Road Grader
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS2
CLR60-01 CLR60-xx See Table Above
MODEL CRG48 CRG60
Maximum Tractor HP 24 24Hitch ASAE Category 1 Standard & Quick HitchSide Panel Thickness 3/16" 3/16"Front Main Beam 3" x 3" x 3/16" 3" x 3" x 3/16"Rear Main Beam 2" x 2" x.1196" 2" x 2" x.1196"Number of Blades (2) Blades, Bolt-On Reversible Cutting Edge
HOW TO ORDER:
Color
Compact Series Road Grader, 4' See Table AboveCompact Series Road Grader, 5' See Table Above
CRG Series Compact Road Grader
The Compact Series Road Grader is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.
BASIC UNIT SELECTION
Compact Series Landscape Rake, 5' 143 lbs. $723
Freight NOT included in list price.
297 lbs. $1,062
Model
NumberDescription Approx. Wt.
List Price
($US)
CRG48-xx 238 lbs. $1,006
CRG60-xx
Prices F.O.B. Selma, Alabama LS2
Machine Prices and Specifications Price Revision January 2nd 2018
CAR48-xx COMPACT AERATOR LIFT TYPE 48"CAR60-xx COMPACT AERATOR LIFT TYPE 60"
List Price
($US)
Compact Aerator
Model
166 lbs.199 lbs.
$870
$1,083
COMPACT PLUGGER LIFT TYPE 60" 199 lbs. $1,083
Model Description Approx. Wt.
List Price
($US)
Compact Plugger
COMPACT PLUGGER LIFT TYPE 48" 166 lbs. $870
How To OrderTo receive a complete order for a Compact Plugger or Aerator, enter the correct model number and
paint color code
Description Approx. Wt.
CAT 1 & QHCAT 1 & QH
Model Color
Indicator Unit Color
Compact Series Plugger & Aerator
Prices F.O.B. Selma, Alabama LS3
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODELMaximum Tractor HP 35 (2 WD), 30 (4 WD) 35 (2 WD), 30 (4 WD) 35 (2 WD), 30 (4 WD)Hitch 3-Point ASAE Category 1 & Quick HitchMoldboard Width 5' 6' 7'Moldboard Height 141/2 " x 1/4" 141/2 " x 1/4" 141/2 " x 1/4"Cutting Edge 1/2" x 6" Reversible 1/2" x 6" Reversible 1/2" x 6" ReversibleKing Pin Diameter 11/4 " Grade 8 11/4 " Grade 8 11/4 " Grade 8Tilt Adjustment 15⁰ Up or Down 15⁰ Up or Down 15⁰ Up or DownAngle Adjustment 5 Forward Positions up to 30⁰, 3 Reverse Positions up to 15⁰
HOW TO ORDER:
Color
3505-01 35 Series Utility Blade, 5' See Table Above3506-01 3506-xx 35 Series Utility Blade, 6' See Table Above3507-01 3507-xx 35 Series Utility Blade, 7' See Table Above
MODEL
$882
50 Series Rear Mount Medium Blade
3505-xx 280 lbs. $800290 lbs. $843325 lbs.
5006 5007
Model
Number Description Approx. Wt.
List Price
($US)
Model Color Unit Color
The 35 Series Rear Mounted Blade is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.Additional equipment for this model is listed in the Options section below.
BASIC UNIT SELECTION
3505 3506 3507
Freight NOT included in list price.
35 Series Rear Mount Medium Blade
35 Series
50 Series
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS4
MODELMaximum Tractor HP 50 (2 WD), 40 (4 WD) 50 (2 WD), 40 (4 WD)Hitch 3-Point ASAE Category 1 & Quick HitchMoldboard Width 6' 7'Moldboard Height 16" x 5/16" 16" x 5/16"Cutting Edge 1/2" x 6" Reversible 1/2" x 6" ReversibleKing Pin Diameter 11/4 " Grade 8 11/4 " Grade 8Tilt Adjustment 15⁰ Up or Down 15⁰ Up or DownOffset adjustment 23" Left or Right 23" Left or RightAngle adjustmenr 5 Forward Positions up to 30⁰, 3 Reverse Positions up to 15⁰Parking Stand Standard Standard
HOW TO ORDER:
Color
5006-01 50 Series Medium Blade, 6' See Table Above5007-01 5007-xx 50 Series Medium Blade, 7' See Table Above
See Table Above50072391 Skid Shoe Kit, 35/50/70 Series Blades $302
OPTIONS
455 lbs. $1,123
Model
Number
List Price
($US)
5006-xx $1,074
Description Approx. Wt.
390 lbs.
50 Series Rear Mount Medium Blade
The 50 Series Rear Mounted Blade is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.Additional equipment for this model is listed in the Options section below.
BASIC UNIT SELECTION
5006 5007
Freight NOT included in list price.
Prices F.O.B. Selma, Alabama LS4
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
Moldboard Width 6' 7' 8'Moldboard Height 18" x 5/16" 18" x 5/16" 18" x 5/16"Cutting Edge 1/2" x 6" Reversible 1/2" x 6" Reversible 1/2" x 6" ReversibleKing Pin Diameter 11/4 " Grade 8 11/4 " Grade 8 11/4 " Grade 8Tilt Adjustment 5 Positions up to 30⁰ 5 Positions up to 30⁰ 5 Positions up to 30⁰
Offset Adjustment 18" Left or Right 18" Left or Right 18" Left or RightAngle Adjustment 360⁰ Rotation, 5 Forward Positions up to 45⁰, 5 Reverse Positions up to 30⁰
Parking Stand Standard Standard Standard
HOW TO ORDER: The 70 Series Rear Mounted Blade is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.Additional equipment for this model is listed in the Options section below.
BASIC UNIT SELECTION
Freight NOT included in list price.
7006 7007 7008
Model Color
Indicator Unit Color
70 Series Medium Duty Blade
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS5
7006-01 See Table Above7007-01 7007-xx See Table Above7008-01 7008-xx See Table Above
Skid Shoe Kit, 35/50/70 Series Blades
End Plate Kit, 70/91 Series Blades
Manual Ratchet Bundle (For OffsetFunction Only)
50070543 $331
70 Series Medium Duty Blade, 8' 572 lbs. $1,751
OPTIONS
50072391 $302
1817 $142
Model Number Description Approx. Wt.List Price
($US)
15 lbs.
7006-xx 70 Series Medium Duty Blade, 6' 510 lbs. $1,558
70 Series Medium Duty Blade, 7' 538 lbs. $1,645
BASIC UNIT SELECTION
Model Number Description Approx. Wt. List Price
($US)Color
MODEL
Prices F.O.B. Selma, Alabama LS5
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL
Maximum Tractor HP 90 (2 WD), 70 (4 WD) 90 (2 WD), 70 (4 WD)Hitch 3-Point ASAE Category 1 & 2 & Category 2 Quick HitchMoldboard Width 7' 8'Moldboard Height 16" x 3/8" 16" x 3/8"Cutting Edge 1/2" x 6" Reversible 1/2" x 6" ReversibleKing Pin Diameter 3" 3"Tilt Adjustment 15 deg. Maximum Left or Right 15 deg. Maximum Left or RightOffset Adjustment 20" Maximum Left or Right 20" Maximum Left or RightAngle Adjustment 50⁰ Maximum Left or Right, Forward or ReverseParking Stand Standard Standard
HOW TO ORDER:
Model Color
Indicator Unit Color
91 Series Medium Duty Blade9107 9108
The 91 Series Rear Mounted Blade is available as a lift-type implement only. Your order must specifymodel number (including model color indicator from the chart above), three (3) blade adjustmentselections*, and any desired additional equipment from the Options section below.
BASIC UNIT SELECTION
Model
Number Approx. Wt.
List Price
($US)
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS6
Description Color
9107-01 91 Series Medium Duty Blade, 7' See Table Above9108-01 9108-xx 91 Series Medium Duty Blade, 8' See Table Above
8" Hydraulic Cylinder Kit16" Hydraulic Cylinder Kit8" Pin Jack Assembly16" Pin Jack AssemblyHose Holder Bundle
*Note:
MODEL50070543 End Plate Kit, 70/91 Series Blades $331
The tilt function requires (1) 8" selection. The angle function requires (1) 16" selection, and theoffset function requires (1) 16" selection. Only (1) hose holder bundle is required, regardless of thenumber of hydraulic functions ordered.
89290 Skid Shoes 60 lbs. $244
OPTIONS
95841 $82
89295 15 lbs. $156
89294 37 lbs. $211
95838 67 lbs. $571
BASIC UNIT SELECTION
Model
Number Approx. Wt.
List Price
($US)
9107-xx 807 lbs. $2,641
BLADE ADJUSTMENT SELECTION*
95839 52 lbs. $501
827 lbs. $2,698
Prices F.O.B. Selma, Alabama LS6
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL
Maximum Tractor HP 125 (2 WD), 80 (4 WD) 125 (2 WD), 80 (4 WD)Hitch 3-Point ASAE Category 1 & 2 & Quick HitchMoldboard Width 8' 9'Moldboard Height 17" x 3/8" 17" x 3/8"Cutting Edge 1/2" x 6" 1/2" x 6"King Pin Diameter 3" 3"Tilt Adjustment 15⁰ Up or Down 15⁰ Up or DownOffset Adjustment 30" Left or Right 30" Left or RightAngle Adjustment 45⁰ Left or Right 45⁰ Left or RightParking Stand Standard StandardHose Holder Standard Standard
HOW TO ORDER:
Description
100-08 836 lbs. $3,285
100 Series Heavy Duty Blade100-08 100-09
The100 Series Rear Mounted Blade is available as a lift-type implement only. Your order must specifymodel number, three (3) blade adjustment selections*, and any desired additional equipment from theOptions section below.
100 Series Heavy Duty Blade, 8', Bush Hog Red
BASIC UNIT SELECTION
Approx. Wt.
List Price
($US)Model Number
876 lbs. $3,399100 Series Heavy Duty Blade, 9', Bush Hog Red
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS7
End PlatesOpen Center 3-Spool ValveValve Mounting Kit (Hose Fittings)Selector Valve (Valve Only)Skid Shoes for 100/160/225/300 Series BladesGauge Wheel, Hydraulic AdjustmentGauge Wheel, Ratchet Adjustment
100-08 836 lbs. $3,285100 Series Heavy Duty Blade, 8', Bush Hog Red876 lbs. $3,399100 Series Heavy Duty Blade, 9', Bush Hog Red
33 lbs. $529
BLADE ADJUSTMENT SELECTION*
00768250 38 lbs. $290
00768270 22 lbs. $252
$355
9150040400
9150040400
9150040004
00759684
63 lbs.38 lbs.
63 lbs.
$781
$290
$781
00768250
Select either manual or hydraulic adjustment for each of the three functions (offset, angle and tilt).
OPTIONS
00768321 $941
00768493 $691143 lbs.
30 lbs.112 lbs.
00768242
05912400000691700000
0781300000
65 lbs. $276
Prices F.O.B. Selma, Alabama LS7
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL 141-08 141-09Maximum Tractor HP 141 (2WD), 110 (4WD) 141 (2WD), 110 (4WD)Hitch
Moldboard Width 8' 9'Moldboard Height 19" 19"Cutting Edge 1/2" x 6" 1/2" x 6"King Pin Diameter 4" 4"Tilt Adjustment 15⁰ Up or Down 15⁰ Up or DownOffset Adjustment 35" Left or Right 35" Left or RightAngle Adjustment 45⁰ Left or Right 45⁰ Left or RightParking Stand Standard StandardHose Holder (Front) Standard Standard
HOW TO ORDER: The 141 Series Rear Mounted Blade is available as a lift-type implement only. Your order must specifymodel number, three (3) blade adjustment selections*, and any desired additional equipment from theOptions section below.
BASIC UNIT SELECTION
Approx. Wt.
List Price
($US)Model Number
Unit ColorModel Color Indicator
141 Series Heavy Duty Blade
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS8
Description
14108-xx14109-xx
*Note: The tilt function requires (1) 8" selection. The angle function requires (1) 16" selection,
and the offset function requires (1) 16" selection. Only (1) hose holder bundle is required,
regardless of the number of hydraulic functions ordered.
OPTIONS
15 lbs. $1568" Pin Jack Assembly
BASIC UNIT SELECTION
Approx. Wt.
List Price
($US)Model Number
$254End Plate Kit for 141/181 Series Blades
16" Pin Jack Assembly
141 Series Heavy Duty Blade, 8', Bush Hog Red 1146 lbs. $4,268
1170 lbs.
BLADE ADJUSTMENT SELECTION
52 lbs. $50195839 8" Hydraulic Cylinder Kit
95838 67 lbs. $571
141 Series Heavy Duty Blade, 9', Bush Hog Red $4,455
Skid Shoes
95899
16" Hydraulic Cylinder Kit
37 lbs. $211
Hose Holder Bundle
OPTIONS
60 lbs. $24489290
95841 0 lbs. $82
8929589294
Prices F.O.B. Selma, Alabama LS8
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL 160-08
Maximum Tractor HP 160 (2 WD), 135 (4 WD)Hitch 3-Point ASAE Category 2 & 3 & Quick HitchMoldboard Width 8' 9' 10'Moldboard Height 18" x 1/2" 18" x 1/2" 18" x 1/2"Cutting Edge 1/2" x 6" 1/2" x 6" 1/2" x 6"King Pin Diameter 4" 4" 4"Tilt Adjustment 15⁰ Up or Down 15⁰ Up or Down 15⁰ Up or DownOffset Adjustment 37" Left or Right 37" Left or Right 37" Left or RightAngle Adjustment 45⁰ Left or Right 45⁰ Left or Right 45⁰ Left or RightParking Stand Standard Standard StandardHose Holder Standard Standard Standard
HOW TO ORDER:
Description
190 (2 WD), 160 (4 WD) 175 (2 WD), 150 (4 WD)
160 Series Heavy Duty Blade160-10160-09
The160 Series Rear Mounted Blade is available as a lift-type implement only. Your order must specifymodel number, three (3) blade adjustment selections*, and any desired additional equipment from theOptions section below.
BASIC UNIT SELECTION
Approx. Wt.
List Price
($US)Model Number
160-08 160 Series Heavy Duty Blade, 8', Bush Hog Red 1339 lbs. $4,750
1459 lbs. $4,975
160-09BH 160 Series 9' Rear 3pt Blade, Bush Hog Red 1449 lbs. $4,863
160 Series Heavy Duty Blade, 10', Bush Hog Red
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS9
160-09BH 160 Series 9' Rear 3pt Blade, Bush Hog Red 1449 lbs. $4,863
9150040400 63 lbs. $781
9150040400 63 lbs. $781
B69115A 45 lbs. $315
B69115A 45 lbs. $315
$355
B69116B 28 lbs. $305
9150040004 33 lbs. $529
End Plates for 160/225/300 Series Blades 58 lbs. $335
Select either manual or hydraulic adjustment for each of the three functions (offset, angle and tilt).
OPTIONS
91500524110691700000 Open Center 3-Spool Valve00759684 Valve Mounting Kit (Hose Fittings)0781300000 Selector Valve (Valve Only)
354 lbs. $1,659
00768242 Skid Shoes for 100/160/225/300 SeriesBlades
30 lbs.
0691360000
160 Series Heavy Duty Blade, 10', Bush Hog Red
Dual Gauge Wheel, Hydraulic Adjustment
Prices F.O.B. Selma, Alabama LS9
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL
Maximum Tractor HP 180(2WD), 140(4WD) 180(2WD), 140(4WD)Hitch ------------- 3-Point ASAE Category 2 & 3 & Quick Hitch -------------Moldboard Width 9' 10'Moldboard Height 18" x 1/2" 18" x 1/2"Cutting Edge 1/2" x 6" 1/2" x 6"King Pin Diameter 5" 5"Tilt Adjustment 15
⁰ Up or Down 15
⁰ Up or Down
Offset Adjustment 37" Left or Right 37" Left or RightAngle Adjustment 45
⁰ Left or Right 45
⁰ Left or Right
Parking Stand Standard StandardHose Holder (Front) Standard StandardHOW TO ORDER:
Description
The 181 Series Rear Mounted Blade is available as a lift-type implement only. Your order must specifymodel number, three (3) blade adjustment selections, and any desired additional equipment from theOptions section below.
181 Series Heavy Duty Blade
181-09 181-10
Unit ColorModel Color Indicator
BASIC UNIT SELECTION
Approx. Wt.
18109-xx 181 Series Heavy Duty Blade, 9', Bush Hog Red 1589 lbs.
List Price
($US)
$6,958
Model Number
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS10
Description
18110-xx
MODEL
Approx. Wt.
18109-xx 181 Series Heavy Duty Blade, 9', Bush Hog Red 1589 lbs.
List Price
($US)
$6,958
Model Number
BLADE ADJUSTMENT SELECTION*
52 lbs. $501
181 Series Heavy Duty Blade, 10', Bush Hog Red 1613 lbs. $7,029
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL 300-14
250/225 225/200 175/160 NA/300dbhp NA/250dbhp
Hitch 3-Point Category 2 & 3 & Quick Hitch 3-Point Category 3 & 4 & Quick HitchMoldboard Width 8' 10' 12' 12' 14'Moldboard Height 20" x 1/2" 20" x 1/2" 20" x 1/2" 20" x 1/2" 20" x 1/2"Cutting Edge 1/2" X 6" 1/2" X 6" 1/2" X 6" 1/2" X 6" 1/2" X 6"King Pin Diameter 41/2 " 41/2 " 41/2 " 5" 5"
15⁰ Up or Down 15⁰ Up or Down 15⁰ Up or Down 15⁰ Up or Down 15⁰ Up or Down
46" Left or Right 46" Left or Right 46" Left or Right 50' Left or Right 50" Left or Right
45⁰ Left or Right 45⁰ Left or Right 45⁰ Left or Right 45⁰ Left or Right 45⁰ Left or RightParking Stand Standard Standard Standard Standard StandardHose Holder Standard Standard Standard Standard Standard
HOW TO ORDER:
BASIC UNIT SELECTION
Description Approx. Wt.
List Price
($US)Model Number
225/300 Series Heavy Duty Blade
The 225 and 300 Series Rear Mounted Blades are available as a lift-type implement only. Each modelis priced as a complete unit with all hydraulics included. Your order must specify model number. Anydesired additional equipment may be ordered from the Options section below.
Maximum Tractor HP
(2WD/4WD)
225-08 225-10 225-12 300-12
Offset Adjustment
(Hydraulic Only)
Angle Adjustment
(Hydraulic Only)
Tilt Adjustment
(Hydraulic Only)
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS11
225-10
225-12
300-12
300-14
Dual Gauge Wheel, Hydraulic AdjustmentOpen Center 3-Spool ValveValve Mounting Kit (Hose Fittings)Selector Valve (Valve Only)Skid Shoes for 100/160/225/300 Series BladesEnd Plates for 160/225/300 Series Blades
3603 lbs.
$10,162
$15,465
$15,850
300 Series Heavy Duty Blade, 12', Complete, with AllHydraulics Included, Bush Hog Red
225 Series Heavy Duty Blade, 10', Complete, with AllHydraulics Included, Bush Hog Red
BASIC UNIT SELECTION
Description Approx. Wt.
List Price
($US)
225-08 225 Series Heavy Duty Blade, 8', Complete, withAll Hydraulics Included, Bush Hog Red
2120 lbs. $9,515
Model Number
00768242 30 lbs. $355
0691360000 58 lbs. $335
007596840781300000
0691700000
OPTIONS
00761806421 lbs. $1,999
2260 lbs. $9,769
300 Series Heavy Duty Blade, 14', Complete, with AllHydraulics Included, Bush Hog Red
2400 lbs.
3463 lbs.
225 Series Heavy Duty Blade, 12', Complete, with AllHydraulics Included, Bush Hog Red
Prices F.O.B. Selma, Alabama LS11
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL
Rake Width 60" 72" 84"Rake Height 15" 15" 15"Hitch Type ASAE Category 1 & Quick HitchTractor HP 35 Maximum 35 Maximum 35 MaximumRake Pivot 5 Forward Positions, Up to 30
⁰; 3 Reverse Positions, Up to 15⁰
Pivot King Pin 11/4 " 11/4 " 11/4 "Tine Spacing 1" 1" 1"Tine Material High Carbon Spring SteelTine Size 5/16" x 1" 5/16" x 1" 5/16" x 1"
Color
LLR60-01 See Table AboveLLR72-01 LLR72-xx See Table AboveLLR84-01 LLR84-xx See Table Above
LLR Series Economy Landscape RakeLLR60 LLR72 LLR84
HOW TO
ORDER:
The LLR Series Landscape Rake is available as a lift-type implement only. It is priced as a complete unit and isshipped fully assembled. Indicate your choice of model color from the chart above. If desired, an optional GaugeWheel Kit may be selected from the Options section below.
Freight NOT included in list price.
BASIC UNIT SELECTION
Description
MLR96MLR72 MLR84
LLR Series MLR Series
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS12
MODEL
Rake Width 70" 84" 96"Rake Height 15" 15" 15"Hitch Type ASAE Category 1 & Quick HitchTractor HP 50 Maximum 50 Maximum 50 MaximumRake Pivot 5 Forward Positions, Up to 30
⁰; 3 Reverse Positions, Up to 15⁰
Pivot King Pin 11/4 " 11/4 " 11/4 "Tine Spacing 1" 1" 1"Tine Material High Carbon Spring SteelTine Size 5/16" x 1" 5/16" x 1" 5/16" x 1"
Color
MLR72-01 See Table AboveMLR84-01 MLR84-xx See Table AboveMLR96-01 MLR96-xx See Table Above
MLR Series Medium Duty Landscape Rake
OPTIONS
50047898 Gauge Wheel Kit 20 lbs. $304
MLR Medium Duty Landscape Rake, 84" 345 lbs. $1,323MLR Medium Duty Landscape Rake, 96" 365 lbs. $1,519
MLR72-xx 325 lbs. $1,243MLR Medium Duty Landscape Rake, 72"
MLR96
Approx. Wt.
List Price
($US)
BASIC UNIT SELECTION
Description
HOW TO
ORDER:
The MLR Series Landscape Rake is available as a lift-type implement only. It is priced as a complete unit and isshipped fully assembled. Indicate your choice of model color from the chart above. If desired, an optional GaugeWheel Kit may be selected from the Options section below.
Model
Number
MLR72 MLR84
Freight NOT included in list price.
Prices F.O.B. Selma, Alabama LS12
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
Scarifier Size 5/8" x 21/2 " 5/8" x 21/2 " 5/8" x 21/2 " 5/8" x 21/2 "
4 4 5 5
Hitch ASAE Category 1 & Quick HitchLower Hitch Single Lug Single Lug Single Lug Single LugCutting Edge 1/2" x 6" (Reversible) 1/2" x 6" (Reversible) 1/2" x 6" (Reversible) 1/2" x 6" (Reversible)Number of Blades 2 2 2 2
40 (2WD), 30 (4WD)
A-Frame Bolt-On Bolt-On Bolt-On Bolt-On
Model Color
Indicator Unit Color
BBX Series Box Blade
Side Sheet Thickness
Number of Sacrifier
Teeth
Maximum HP
Requirement
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS13
A-Frame Bolt-On Bolt-On Bolt-On Bolt-On
HOW TO ORDER:
Color
BBX48-01 BBX Series Box Blade, 4 Scarifiers, 48" See Table AboveBBX60-01 BBX60-xx BBX Series Box Blade, 4 Scarifiers, 60" See Table AboveBBX65-01 BBX65-xx BBX Series Box Blade, 5 Scarifiers, 65" See Table AboveBBX72-01 BBX72-xx BBX Series Box Blade, 5 Scarifiers, 72" See Table Above
Description Approx. Wt.
List Price
($US)
390 lbs. $966
375 lbs.
Freight NOT included in list price.
$948
BBX48-xx 260 lbs. $851
325 lbs. $932
The BBX Series Box Blade is available as a lift-type implement only. It is priced as a complete unitand is shipped fully assembled. Indicate your choice of model color from the chart above.
BASIC UNIT SELECTION
Model
Number
Prices F.O.B. Selma, Alabama LS13
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS14
50 (2WD), 35 (4WD)
HOW TO ORDER:
Description Color
SBX48-01 SBX48-xx SBX Series Box Blade, 4 Scarifiers, 48" See Table AboveSBX60-01 SBX60-xx SBX Series Box Blade, 5 Scarifiers, 60" See Table AboveSBX65-01 SBX65-xx SBX Series Box Blade, 5 Scarifiers, 65" See Table AboveSBX72-01 SBX72-xx SBX Series Box Blade, 6 Scarifiers, 72" See Table AboveSBX78-01 SBX78-xx SBX Series Box Blade, 6 Scarifiers, 78" See Table AboveSBX84-01 SBX84-xx SBX Series Box Blade, 6 Scarifiers, 84" See Table Above
The SBX Series Box Blade is available as a lift-type implement only. It is priced as a complete unit andis shipped fully assembled. Indicate your choice of model color from the chart above.
550 lbs. $1,194
580 lbs. $1,273
610 lbs.
510 lbs. $1,140
430 lbs. $955
490 lbs. $1,077
$1,371
Approx. Wt.
List Price
($US)
Maximum HP
Requirement
BASIC UNIT SELECTION
Model
Number
Freight NOT included in list price.
Prices F.O.B. Selma, Alabama LS14
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MBX60-01 MBX60-xx MBX Series Box Blade, 5 Scarifiers, 60" See Table AboveMBX72-01 MBX72-xx MBX Series Box Blade, 6 Scarifiers, 72" See Table AboveMBX84-01 MBX84-xx MBX Series Box Blade, 6 Scarifiers, 84" See Table AboveMBX96-01 MBX96-xx MBX Series Box Blade, 6 Scarifiers, 96" See Table Above
$1,785
$2,006
710 lbs.790 lbs.
$1,287
$1,524
Model
NumberList Price
($US)Approx. Wt.
580 lbs.640 lbs.
The MBX Series Box Blade is available as a lift-type implement only. It is priced as a complete unitand is shipped fully assembled. Indicate your choice of model color from the chart above.
BASIC UNIT SELECTION
Maximum HP Requirement
Freight NOT included in list price.
Prices F.O.B. Selma, Alabama LS15
Machine Prices and Specifications Price Revision January 2nd 2018
RO Series
RBX Series
MODEL
Working Width 72" 65" 72"Number of Scarifiers 6 5 6Cutting Edge ----------Reversible 1/2" x 6", Heat Treated----------Points & Shanks Replaceable Replaceable ReplaceableHitch ----------ASAE Category 1 & 2, Quick Hitch---------
RBX Series Retractable Shank Box BladeRBX720 RBX780 RBX840
Maximum HP Requirement
The RBX Series Box Blade is available as a lift-type implement only. It is priced as a complete unit andis shipped fully assembled. Indicate your choice of model from the Basic Unit Selection below.
BASIC UNIT SELECTION
Model Number Description Approx. Wt.
List Price
($US)
829 lbs. $3,205
890 lbs.
Freight NOT included in list price.
RO Series Roll-Over Box BladeRO-600 RO-650 RO-720
RBX Series Retractable Shank Box Blade, 84"$3,454
RBX Series Retractable Shank Box Blade, 72"RBX Series Retractable Shank Box Blade, 78"
957 lbs. $3,697
RO-840
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS16
MODEL
Working Width 60" 65" 72" 84"Number of Scarifiers 5 5 6 6Cutting Edge ----------Reversible 1/2" x 6", Heat Treated----------Points & Shanks
RO Series Roll-Over Box Blade, 60" Caterpillar YellowRO-650 RO Series Roll-Over Box Blade, 65" Caterpillar YellowRO-720 RO Series Roll-Over Box Blade,72" Caterpillar YellowRO-840 RO Series Roll-Over Box Blade,84" Caterpillar Yellow780 lbs. $2,968
680 lbs. $2,427
710 lbs. $2,594
Approx. Wt.
List Price
($US)
630 lbs. $2,234
MODEL Description
RO-600
Maximum HP Requirement
The RO Series Box Blade is available as a lift-type implement only. It is priced as a complete unit andis shipped fully assembled, with the exception of the handle. Indicate your choice of model from theBasic Unit Selection below.
Freight NOT included in list price.
RO Series Roll-Over Box BladeRO-600 RO-650 RO-720 RO-840
---------------Replaceable-------------------
Prices F.O.B. Selma, Alabama LS16
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
Working Width 60" 72" 84"Side Panel Thickness 3/16" 3/16" 3/16"
4" x 4" x 5/16" Wall
Rear Beam Construction 21/2 " x 21/2 " x 3/16" WallSkid Shoe Construction 3/8" x 21/2 " x 3/16" Long
Three-Position Shanks with Dimpled-On Hardened Tips
4 6 6
(Two) 1/2" x 6" Bolt-On, Replaceable and Reversible Heat-Treated Blades
HOW TO ORDER:
Model Color
Indicator Unit Color
RG Series Road Grader
Scarifier Shanks
Cutting Edges
Front Main Beam
Construction
Number of Scarifier Shanks
Recommended HP
RG60 RG72 RG84
The RG Series Road Grader is available as a lift-type implement only. It is priced as a complete unitand is shipped fully assembled. Indicate your choice of model color from the chart above.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS17
Description Color
RG60-01 RG Series Road Grader, 60" See Table AboveRG72-01 RG72-xx RG Series Road Grader, 72" See Table AboveRG84-01 RG84-xx RG Series Road Grader, 84" See Table Above
Freight NOT included in list price. Freight discount available for multiple unit orders. Please contact Customer Service forFreight NOT included in list price.
Prices F.O.B. Selma, Alabama LS17
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL
Hitch 3-Pt. Cat I & II 3-Pt. Cat I & II90 (2WD) 90 (2WD)
1/2" x 6" Bolt on Replaceable & Reversible Heat Treated Blades
HOW TO ORDER:
Maximum
Recommended HP
Front Main Beam
Construction
Scarifier Shanks
Number of Scarifier
Shanks
Cutting Edges
Unit Color
HDRG Series Heavy Duty Road GraderHDRG96HDRG84
Model Color
Indicator
The HDRG Series Road Grader is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.
4" x 4" x 3/8"4" x 4" x 1/4"1/2" x 2 1/2"
Freight NOT included in list price. Freight discount available for multiple unit orders. Please contact Customer Service for
details.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS18
HOW TO ORDER:
Description Color
HDRG84-01 HDRG84-xx Heavy Duty Road Grader 84" See Table AboveHDRG96-01 HDRG96-xx Heavy Duty Road Grader 96" See Table Above
The HDRG Series Road Grader is available as a lift-type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.
Freight NOT included in list price.
BASIC UNIT SELECTION
Approx. Wt.
List Price
($US)
$2,220
$2,577
750 lbs.828 lbs.
Model
Number
Prices F.O.B. Selma, Alabama LS18
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL PVB (Bar Shank) Series PVS (Spike Shank) Series
A-Frame Heavy Duty Solid Heavy Duty SolidHitch ASAE Category 1 Heavy Duty Double StrapShank Bar, Reversible Spike, Non-ReversibleWorking Width 60" - 84" 60" - 84"Roller Bearing 1" 1"Rear Roller Hinged HingedNumber of Rollers (1) Single Roll, (2) Double Roll (1) Single Roll, (2) Double RollIndependent Spring Tension Yes YesSpikes on Roller No 11/4 "Maximum Tractor HP 60 PTO 60 PTOOne Year Limited Warranty
HOW TO ORDER:
Description
PVB-600 $1,732
560 lbs. $1,893
530 lbs.
PV Series Pulverizer
The PV Series Pulverizer is avaialble as a lift-type implement only. It is priced as a complete unit and isshipped fully assembled. Select the desired model from the ordering section below.
BASIC UNIT SELECTION
Single Roll Pulverizer
Approx. Wt.
List Price
($US)
Freight NOT included in list price.
Model Number
PVB Series Single Roller Pulverizer, Bar Shank, 60", Caterpillar YellowPVB Series Single Roller Pulverizer, Bar Shank, 66", Caterpillar Yellow
Single Roll Double Roll
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS19
PVB-600PVB-660PVB-720PVB-840
PVS-600PVS-660PVS-720PVS-840
Description
PVB-662PVB-722PVB-842
PVS-602PVS-662PVS-722PVS-842 $3,132
650 lbs. $2,470
720 lbs. $2,672
720 lbs. $2,672
790 lbs. $3,132
$2,360
640 lbs. $2,187
Double Roll Pulverizer
PVS Series Single Roller Pulverizer, Spike Shank, 84", Caterpillar Yellow
PVB-602680 lbs.640 lbs. $2,187
$2,360
List Price
($US)Approx. Wt.Model Number
$1,732
560 lbs. $1,893
590 lbs. $2,073
530 lbs.
$1,893
590 lbs. $2,073
$2,470
530 lbs. $1,732
PVB Series Single Roller Pulverizer, Bar Shank, 60", Caterpillar YellowPVB Series Single Roller Pulverizer, Bar Shank, 66", Caterpillar YellowPVB Series Single Roller Pulverizer, Bar Shank, 72", Caterpillar YellowPVB Series Single Roller Pulverizer, Bar Shank, 84", Caterpillar Yellow
PVS Series Single Roller Pulverizer, Spike Shank, 60", Caterpillar YellowPVS Series Single Roller Pulverizer, Spike Shank, 66", Caterpillar YellowPVS Series Single Roller Pulverizer, Spike Shank, 72", Caterpillar Yellow
PVS Series Double Roller Pulverizer, Spike Shank, 84", Caterpillar Yellow
650 lbs.
PVB Series Double Roller Pulverizer, Bar Shank, 60", Caterpillar YellowPVB Series Double Roller Pulverizer, Bar Shank, 66", Caterpillar YellowPVB Series Double Roller Pulverizer, Bar Shank, 72", Caterpillar YellowPVB Series Double Roller Pulverizer, Bar Shank, 84", Caterpillar Yellow
PVS Series Double Roller Pulverizer, Spike Shank, 60", Caterpillar YellowPVS Series Double Roller Pulverizer, Spike Shank, 66", Caterpillar YellowPVS Series Double Roller Pulverizer, Spike Shank, 72", Caterpillar Yellow
680 lbs.
790 lbs.
560 lbs.
Prices F.O.B. Selma, LS19
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL PG-600 PG-720 MPG-600 MPG-720
Working Width 60" 72" 60" 72"Shaft 11/4 " 11/4 " 11/4 " 11/4 "Sleeves Greaseable Greaseable Greaseable GreaseableSpoons 3/4" Hard Spoons With Closed Design 3/4" Hard Spoons With Closed DesignNumber of Hubs 8 10 10 12
64 80 80 96
Weight Box Heavy Duty Steel Weight RackHitch (Lift) ASAE Category 1 Standard & Quick Hitch
60 (PTO) 60 (PTO) 60 (PTO) 60 (PTO)
One Year Limited Warranty
HOW TO ORDER:
PG & MPG Series Plugger Core Type Aerators
The Plugger Series Core Type Aerator is available as a lift-type implement only. It is priced as acomplete unit and is shipped fully assembled. Select the desired model from the ordering section below.Optional Slicing Knife, available for all models, may be selected from the Options list.
Number of Spoons
Maximum Tractor
HP
Service for details. (Applies to PG models only)
PG Series MPG Series
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice LS20
Description Approx. Wt.
PG-600PG-720
Description Approx. Wt.
MPG-720
Slicing Knife
Model Number
Model Number List Price
($US)
List Price
($US)
MPG Series PluggerBASIC UNIT SELECTION
350 lbs. $3,081
390 lbs. $3,491
PG Series Plugger, 8 Hubs, 64 Spoons, 60", Caterpillar YellowPG Series Plugger,10 Hubs, 80 Spoons, 72", Caterpillar Yellow
OPTIONS
95159
PG Series PluggerBASIC UNIT SELECTION
$24
MPG-600 460 lbs. $3,220
500 lbs. $3,680
MPG Series Plugger, 10 Hubs, 80 Spoons, 60", Caterpillar YellowMPG Series Plugger, 12 Hubs, 96 Spoons, 72", Caterpillar Yellow
Prices F.O.B. Selma, Alabama LS20
Machine Prices and Specifications Price Revision January 2nd 2018
BASE UNITS DESCRIPTION
Note: **Flat faced couplers are now included with skidsteer mounted splitters**
25/45 25/45 35/55 35/55 45/65 45/65Colors --------------- Available in Red, Orange, Blue and Green ---------------
*Requires multiple passes
Minimum/MaximumTractor H.P. (PTO)
Hitch ASAE Category 1, Standardand Quick Hitch
ASAE Category 1,Standard and Quick Hitch
ASAE Category 1 & 2,Standard and Quick Hitch
Rotor/Blade RotationDiameter
PTO Driveline withSlipclutch
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL2
*Requires multiple passes
Freight NOT included in list price
The RTG Series Rotary Tiller is priced as a complete unit and is shipped fully assembled. To receive acomplete unit, indicate your model choice and desired color from the Basic Unit Selection of theorderding section on the following page.
HOW TO ORDER:
Prices F.O.B. Selma, Alabama TL2
Machine Prices and Specifications Price Revision January 2nd 2018
Bush Hog RedJohn Deere GreenKubota OrangeNew Holland Blue
RT60G-1RRT60G-1x
RT60GR-1RRT60GR-1x
RT72G-1RRT72G-1x
RT72GR-1RRT72GR-1x
RT84G-1RRT84G-1x
RT84GR-1RRT84GR-1x
$3,298
$3,470RTG Series Rotary Tiller, Reverse Rotation, 82.5"Working Width, All Gear Drive and Driveline withSlip Clutch
747 lbs.
759 lbs.
817 lbs.
831 lbs.
877 lbs.
889 lbs.
952 lbs.
966 lbs.
List Price
($US)
$2,419
$2,590
Approx. Ship
Wt.
RTG Series Rotary Tiller, Standard Rotation, 70.5"Working Width, All Gear Drive and Driveline withSlip Clutch
RTG Series Rotary Tiller, Reverse Rotation, 70.5"Working Width, All Gear Drive and Driveline withSlip Clutch
RTG Series Rotary Tiller, Standard Rotation, 82.5"Working Width, All Gear Drive and Driveline withSlip Clutch
RTG Series Rotary Tiller, Standard Rotation, 59"Working Width, All Gear Drive and Driveline withSlip Clutch
673 lbs. 798 lbs.
RTG Series Rotary Tiller, Reverse Rotation, 59"Working Width, All Gear Drive and Driveline withSlip Clutch
683 lbs. 808 lbs.
$2,802
$2,974
BASIC UNIT SELECTION
Model
Number Description
Approx.
Wt.
OB
All RTG units are available in the colors listed to the right. Toreceive your color choice, replace the "X" in the model number withthe appropriate model color indicator as shown.
RTG Series Rotary Tiller
Model Color
Indicator Unit Color
RG
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL3Prices F.O.B. Selma, Alabama TL3
Machine Prices and Specifications Price Revision January 2nd 2018
Standard
HOW TO ORDER:
Freight NOT included in list price
The RTX Series Rotary Tiller is priced as a complete unit and is shipped fully assembled except for the hitch.
10 inches60 / 90Red
2351,094 lbsASAE Cat 410 inches60 / 90RedColors
Min / Max Tractor H.P. (PTO)Tilling Depth*PTO Driveline with Slipclutch
2351,149 lbs.
ModelsRotationDrivetrain
Working WidthTotal WidthHood thickness
Hitch
End Plates ThicknessNumber of FlangesBlades per FlangeRotor Shaft DiameterRotor Shaft Wall ThicknessRotor RPMWeight
These disc harrows are available as lift type implements only. For total price, select a model, gangassembly, and any desired option. Units are shipped fully assembled.
Model Color
Indicator Unit Color
01030514
Freight NOT included in list price. Freight discount available for multiple unit orders. Please contact Customer
Service for details.
1D Series 2D Series 3D Series
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL6
New Holland BlueCaterpillar Yellow
1D60-011D60-xx 1D Series Lift Disc Harrow 60"1D78-011D78-xx 1D Series Lift Disc Harrow 78"
1D60 Gang Assembly, 16" Scallop Disc, 7.5" Front & Rear Spacing1D60 Gang Assembly, 16" Scallop Disc, 9" Front & Rear Spacing1D60 Gang Assembly, 16" Scallop Disc, 9" Front, 7.5" Rear Spacing1D60 Gang Assembly, 18" Scallop Disc, 7.5" Front & Rear Spacing1D60 Gang Assembly, 18" Scallop Disc, 9" Front & Rear Spacing1D60 Gang Assembly, 18" Scallop Disc, 9" Front, 7.5" Rear Spacing
1D Series Lift Disc Harrow Gang Assembly Selection Contined on Next Page
5007259650072597
Part
Number
Color
50072592
$398
16
See Table Above
1D SERIES BASIC UNIT SELECTION
Model
Number Description
14
List Price
($US)
$398
$1,281
$1,192
$1,245
$1,344
$1,239
$1,298
Description
500725935007259450072595
List Price
($US)
See Table Above
1D SERIES GANG ASSEMBLY SELECTION
1D Series 2D Series 3D Series
Prices F.O.B. Selma, Alabama TL6
Machine Prices and Specifications Price Revision January 2nd 2018
Lift Disc Harrow Series Continued
All units are available in the following colors:
Bush Hog RedJohn Deere GreenKubota OrangeNew Holland BlueCaterpillar Yellow
1D78 Gang Assembly, 16" Scallop Disc, 7.5" Front & Rear Spacing1D78 Gang Assembly, 16" Scallop Disc, 9" Front & Rear Spacing1D78 Gang Assembly, 16" Scallop Disc, 9" Front, 7.5" Rear Spacing1D78 Gang Assembly, 18" Scallop Disc, 7.5" Front & Rear Spacing1D78 Gang Assembly, 18" Scallop Disc, 9" Front & Rear Spacing1D78 Gang Assembly, 18" Scallop Disc, 9" Front, 7.5" Rear Spacing
95 - 114 lbs. 84 - 98 lbs. 78 - 90 lbs.Disc Blade Sizes and Types 20" or 22" NotchedDisc Blade Spacing 7.5" or 9" or a Combination of BothDisc Bearing Type Triple Lip Sealed Ball BearingsNumber of Bearings 8 12 12
15, 16.5, 18, 19.5, 21 Degrees
Rear Gang Angle Adjustment 12, 13.5, 15, 16.5, 18 DegreesHitch Frame Construction 4" x 4" x 1/4" TubingSlide Mainframe Construction 4" x 3" x 1/4" Tubing
5" x 3" x 1/4" Tubing
4" x 3" x 1/4" Tubing
Gang Arm Construction 4" x 3" x 1/4" TubingGang Axles 11/8 " Square, High Carbon SteelFront to Rear Leveling System Manual Crank AdjustmentDepth Control Cylinder Stroke Control SpacersHydraulic Cylinder 31/2 " x 8" ASAE Hydraulic CylinderTransport Tires and Wheels (Two) 9.5Lx15 Tires on 15" x 6" - 5 Bolt WheelsParking Jack StandardOptions Disc Scrapers, Dual Wheel Transport Kit
7.5" Front & Rear 7.5" Front & Rear9" Front & Rear 9" Front & Rear9" Front, 7.5" Rear 9" Front, 7.5" Rear7.5" Front & Rear 7.5" Front & Rear9" Front & Rear 9" Front & Rear
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL9
9" Front & Rear 9" Front & Rear9" Front, 7.5" Rear 9" Front, 7.5" Rear
7.5" Front & Rear9" Front & Rear9" Front, 7.5" Rear7.5" Front & Rear9" Front & Rear9" Front, 7.5" Rear
HOW TO ORDER:
Freight NOT included in list price.
Disc Blade Spacing
DHP12
22"22"
These disc harrows are available as pull type implements only. For the total price, select a model, gangassembly, and desired option(s). Each unit is shipped in three crates for dealer assembly.
2978 83
2750 862780
Disc Blade Size20"20"20"22"
22"22" 92
82
2810 78
98106 2764
2279 1142339
28662922 86
9022"22"
Wt. (lbs.)Wt./Disc
(lbs.)
2746
Prices F.O.B. Selma, Alabama TL9
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
Bush Hog RedJohn Deere GreenKubota OrangeNew Holland BlueCaterpillar Yellow
DHP8-01DHP8-xx DHP Series Pull Disc Harrow, 8', Single Axle See Table AboveDHP10-01DHP10-xx DHP Series Pull Disc Harrow, 10', Single Axle See Table AboveDHP12-01DHP12-xx DHP Series Pull Disc Harrow, 12', Single Axle See Table Above
DHP8 Gang Assembly, 20" Scallop Disc, 7.5" Front & Rear SpacingDHP8 Gang Assembly, 20" Scallop Disc, 9" Front & Rear SpacingDHP8 Gang Assembly, 20" Scallop Disc, 9" Front, 7.5" Rear SpacingDHP8 Gang Assembly, 22" Scallop Disc, 7.5" Front & Rear SpacingDHP8 Gang Assembly, 22" Scallop Disc, 9" Front & Rear SpacingDHP8 Gang Assembly, 22" Scallop Disc, 9" Front, 7.5" Rear Spacing
DHP10 Gang Assembly, 20" Scallop Disc, 7.5" Front & Rear SpacingDHP10 Gang Assembly, 20" Scallop Disc, 9" Front & Rear SpacingDHP10 Gang Assembly, 20" Scallop Disc, 9" Front, 7.5" Rear SpacingDHP10 Gang Assembly, 22" Scallop Disc, 7.5" Front & Rear SpacingDHP10 Gang Assembly, 22" Scallop Disc, 9" Front & Rear SpacingDHP10 Gang Assembly, 22" Scallop Disc, 9" Front, 7.5" Rear Spacing
DHP12 Gang Assembly, 20" Scallop Disc, 7.5" Front & Rear SpacingDHP12 Gang Assembly, 20" Scallop Disc, 9" Front & Rear SpacingDHP12 Gang Assembly, 20" Scallop Disc, 9" Front, 7.5" Rear Spacing
DHP Series Pull Disc HarrowModel Color
Indicator Unit Color
Model
Number
0103051416
BASIC UNIT SELECTION
Description Color
List Price
($US)
$6,236
$6,354
$6,873
500721485007214950072230
DHP10 SERIES GANG ASSEMBLY SELECTION
50072141 $4,808
$4,573
$4,736
$5,084
$4,851
$4,967
$6,468
50072143
50072147
5007214550072146
500721385007213950072140
DHP12 SERIES GANG ASSEMBLY SELECTION
Part
Number Description
50072144
50072142
DHP8 SERIES GANG ASSEMBLY SELECTION
500721355007213650072137
$5,485
$5,544
$5,544
$3,987
$3,813
$3,871
$4,216
$4,042
$4,125
List Price
($US)
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL10
DHP12 Gang Assembly, 20" Scallop Disc, 9" Front, 7.5" Rear SpacingDHP12 Gang Assembly, 22" Scallop Disc, 7.5" Front & Rear SpacingDHP12 Gang Assembly, 22" Scallop Disc, 9" Front & Rear SpacingDHP12 Gang Assembly, 22" Scallop Disc, 9" Front, 7.5" Rear Spacing
DHP8 Series OnlyDHP8 Scraper Kit, 20/22 Discs, 7.5" Front & Rear SpacingDHP8 Scraper Kit, 20/22 Discs, 9" Front & Rear SpacingDHP8 Scraper Kit, 20/22 Discs, 9" Front, 7.5" Rear Spacing
DHP10 Series OnlyDHP10 Scraper Kit, 20/22 Discs, 7.5" Front & Rear SpacingDHP10 Scraper Kit, 20/22 Discs, 9" Front & Rear SpacingDHP10 Scraper Kit, 20/22 Discs, 9" Front, 7.5" Rear Spacing
DHP Dual Wheel Transport Kit, Available for all DHP models
$6,354
$6,873
$6,664
$6,755
$1,021
5007231350072314
$853
$908
$1,282
50072149
5007231150072312
OPTIONS
50072310
500722305007223150072232
$1,235
$1,190
$1,418
$1,349
$1,372
$787
DHP12 Series Only
5007231750072318
50072233
50072316
50072315
Prices F.O.B. Selma, Alabama TL10
Machine Prices and Specifications Price Revision January 2nd 2018
MODEL
Overall Width
Maximum Working Width
Overall Depth
Overall Height
Weight
Number of Shanks
Angle Iron Size (Width x Height x Thickness)
Hole Spacing
Hitch
Teeth
Sugested Minimum PTO HP
HOW TO ORDER:
206
APP48-3
495/8 "44"393/4 "403/8 "
3
1"Category 1 Standard & Quick Hitch
5/16" x 2" x 101/8 " 1080 High Carbon 38-44 Rockwell C Reversible
55
63
21/2 " x 21/2 " x 3/8"9
24 35 35 49 49
7
855/8 "80"393/4 "
675/8 "62"393/4 "
675/8 "62"393/4 "403/8 "367
APP60-5 APP66-5 APP66-7
403/8 "284
615/8 "56"393/4 "403/8 "228
APP85-7 APP85-9
855/8 "80"393/4 "403/8 "455
403/8 "3867
The All Purpose Plow is avaialble as a lift-type implement only. It is priced as a complete unit and isshipped fully assembled.
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL11
Description
APP48-3 All Purpose Plow, 48", 3 Shanks, Bush Hog RedAPP60-5 All Purpose Plow, 60", 5 Shanks, Bush Hog RedAPP66-5 All Purpose Plow, 66", 5 Shanks, Bush Hog RedAPP66-7 All Purpose Plow, 66", 7 Shanks, Bush Hog Red
APP85-7 All Purpose Plow, 85", 7 Shanks, Bush Hog RedAPP85-9 All Purpose Plow, 85", 9 Shanks, Bush Hog Red
$737
APP Series All Purpose PlowBASIC UNIT SELECTION
List Price
($US)
Model
Number
$1,050
$1,158
$1,356
$1,405
$1,616
Prices F.O.B. Selma, Alabama TL11
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL HDSS1S HDSS1L HDSS2S HDSS2L
Hitch Category 1 & 2 Quick HitchOverall Width 41" 41" 49" 49"Overall Height 391/2 " 431/2 " 391/2 " 431/2 "Horsepower Approximately 35 hp per shank up to 85 hpShank Size 11/4 " x 97/16 " x 261/8 " (Long), 11/4 " x 97/16 " x 221/8 " (Short)Number of Shanks 1 1 2 2Cutting Point 1" x 21/2 " x 93/8 "Maximum Cutting Depth 191/8 " 231/8 " 191/8 " 231/8 "
HOW TO ORDER:
Color
HDSS1S-01 See Table AboveHDSS1L-01HDSS1L-xx See Table AboveHDSS2S-01HDSS2S-xx See Table AboveHDSS2L-01HDSS2L-xx See Table Above
Subsoiler, Heavy Duty, 2 Shank, Short
Model Color
Indicator Unit Color
HDSS Series Heavy Duty Subsoiler
The Heavy Duty Series Subsoiler is available as a 3-Point type implement only. It is priced as a completeunit and is shipped fully assembled. Indicate your choice of model color from the chart above.
BASIC UNIT SELECTION
Freight NOT included in list price.
Subsoiler, Heavy Duty, 2 Shank, Long420 lbs.
Model NumberDescription
$1,154
Subsoiler, Heavy Duty, 1 Shank, Long 276 lbs. $1,177
Approx. Wt.
List Price
($US)
HDSS1S-xx Subsoiler, Heavy Duty, 1 Shank, Short
450 lbs.
261 lbs.
$2,197
$2,220
HDSS1 Subsoiler HDSS2 Subsoiler
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL12Prices F.O.B. Selma, Alabama TL12
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL SS1 Subsoiler LP Layoff Plow 1RCV Cultivator
Shank Size 3/4" x 6" 3/4" x 4" 3/8" x 13/4 "Number of Shanks 1 1 6
Cutting Point 1/2" x 21/2 " x 12" 16" x 4.75 mm 1/4" x 21/2 " x 11"Maximum Cutting Depth 255/8 "
HOW TO ORDER:
Color
SS1-01 Subsoiler, Standard Duty See Table AboveLP-01 LP-xx Layoff Plow, Light Duty See Table Above
1RCV-011RCV-xx Cultivator, Light Duty See Table Above
Model Color
Indicator Unit Color
$390
$225
SS1 Series Subsoiler, LP Series Layoff Plow, 1RCV Series Cultivator
The Ground Engaging Implements are available as a 3-Point type implement only. Each model is pricedas a complete unit and is shipped fully assembled. Indicate your choice of model color from the chartabove.
BASIC UNIT SELECTION
Model NumberDescription Approx. Wt.
List Price
($US)
SS1-xx 113 lbs.75 lbs.
Freight NOT included in list price.
171 lbs. $520
OPTIONS (1RCV Model Only)
SS1 Subsoiler LP Layoff Plow 1RCV Cultivator
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL13
Middle Tine Kit for 1RCV Series Cultivator50072481 $99
OPTIONS (1RCV Model Only)
Prices F.O.B. Selma, Alabama TL13
Machine Prices and Specifications Price Revision January 2nd 2018
All units are available in the following colors:
01 Bush Hog Red03 John Deere Green05 Kubota Orange14 New Holland Blue16 Caterpillar Yellow
MODEL PA8 PA10
Tractor HP Requirements 40 - 90 hp 40 - 90 hpWorking Width 86" 116"Overall Width 97.38" 127.63"Overall Length 136" in Transportation PositionOverall Height 44.25" (With Tines on the Ground)Weight Box Standard Standard
2200 lbs. 2900 lbs.
Number of Tines 24 (LH), 24 (RH) 32 (LH), 32 (RH)Tine Material Forged and Heat Treated Through SteelTine Hub Spacing 7.5" 7.5"Tine Penetration Up to 8.125", Depending on Ground ConditionFrame Construction 4" Square Tubing, All Welded ConstructionMain Tongue Beam 4" Square 4" SquareRotor/Tine Support Hangers 1" x 7" Heavy Duty HangersRotor Bearings Heavy Duty GreaseableRotor Bearing Protection .38" x 3.5" Metal Housing
2.5⁰, 5⁰, 7.5⁰ 2.5⁰, 5⁰, 7.5⁰
Tires and Wheels 9.5L x 15 Tires on 15" - 5 Bolt WheelsTine Depth Control Add Cylinder Donuts to Cylinder Rod (Included)
3.5" x 8" 3.5" x 8"Manual Cylinder Lock Manual Cylinder Lock
Maximum Ballast in Weight Box
(Ballast Not Included with Unit)
Model Color
Indicator Unit Color
PA Series Pasture Aerator
Rotor Angle Adjustment
Hydraulic Cylinder
Transportation Lock
Rear Axle Pivot
Prices F.O.B. Selma, Alabama and Subject to Change Without Notice TL14
Safety Tow Chain Included IncludedOne Year Limited Warranty
HOW TO ORDER:
Color
PA8-01 PA Series Pasture Aerator, 8' See Table AbovePA10-01PA10-xx PA Series Pasture Aerator, 10' See Table Above2500 lbs.
BASIC UNIT SELECTION
Model Number Description Approx. Wt.
PA8-xx 1950 lbs.$13,503
The PA Series Pasture Aerator is available as a pull-type implement only. It is priced as a completeunit, and each unit is shipped in one crate with the tongue and tailwheels to be assembled by thedealer. Indicate your choice of model color from the chart above.