ppt

4: Network Layer 4a-1

Chapter 4: Network LayerChapter goals: understand principles

behind network layer services: routing (path

selection) dealing with scale how a router works advanced topics: IPv6,

multicast instantiation and

implementation in the Internet

Overview: network layer services routing principle: path

selection hierarchical routing IP Internet routing protocols

reliable transfer intra-domain inter-domain

what’s inside a router? IPv6 multicast routing


Network layer functions

transport packet from sending to receiving hosts

network layer protocols in every host, router

three important functions: path determination: route

taken by packets from source to dest. Routing algorithms

switching: move packets from router’s input to appropriate router output

call setup: some network architectures require router call setup along path before data flows

networkdata linkphysical








application

transportnetworkdata linkphysical

application



Network service model

Q: What service model for “channel” transporting packets from sender to receiver?

guaranteed bandwidth? preservation of inter-

packet timing (no jitter)? loss-free delivery? in-order delivery? congestion feedback to

sender?

? ??virtual circuit

or datagram?

The most important abstraction provided

by network layer:

serv

ice a

bst

ract

ion


Virtual circuits

call setup, teardown for each call before data can flow each packet carries VC identifier (not destination host ID) every router on source-dest path s maintain “state” for each

passing connection transport-layer connection only involve two end systems

link, router resources (bandwidth, buffers) may be allocated to VC to get circuit-like perf.

“source-to-dest path behaves much like telephone circuit” performance-wise network actions along source-to-dest path


Virtual circuits: signaling protocols

used to setup, maintain teardown VC used in ATM, frame-relay, X.25 not used in today’s Internet

application


application


1. Initiate call 2. incoming call

3. Accept call4. Call connected5. Data flow begins 6. Receive data


Datagram networks: the Internet model no call setup at network layer routers: no state about end-to-end connections

no network-level concept of “connection”

packets typically routed using destination host ID packets between same source-dest pair may take

different paths

application


application


1. Send data 2. Receive data


Network layer service models:

NetworkArchitecture

Internet

ATM

ATM

ATM

ATM

ServiceModel

best effort

CBR

VBR

ABR

UBR

Bandwidth

none

constantrateguaranteedrateguaranteed minimumnone

Loss

no

yes

yes

no

no

Order

no

yes

yes

yes

yes

Timing

no

yes

yes

no

no

Congestionfeedback

no (inferredvia loss)nocongestionnocongestionyes

no

Guarantees ?

Internet model being extended: Intserv, Diffserv Chapter 6


Datagram or VC network: why?

Internet data exchange among

computers “elastic” service, no

strict timing req. “smart” end systems

(computers) can adapt, perform

control, error recovery simple inside network,

complexity at “edge” many link types

different characteristics uniform service difficult

ATM evolved from telephony human conversation:

strict timing, reliability requirements

need for guaranteed service

“dumb” end systems telephones complexity inside

network


Routing

Graph abstraction for routing algorithms:

graph nodes are routers

graph edges are “physical” links link cost: delay, $cost,

or congestion level

Goal: determine “good” path

(sequence of routers) thru network from source to

dest.

Routing protocol

A

ED

CB

F

2

2

13

1

1

2

53

5

“good” path: minimum cost path other def’s possible

• policy constraints


Routing Algorithm classification

View: global or local global: graph of entire

network (routers, links). [link state]

local: partial knowledge of remote parts of network. [distance vector approach]

Centralized or decentralized one node maintains view,

and distributes routes to other nodes

all nodes maintain view

Static or dynamic?Static: infrequent route changes infrequent view update;

static link costs (e.g. up/down)

Dynamic: frequent periodic route

changes frequent view update;

dynamic link costs (e.g. delay)


A Link-State Routing Algorithm

Dijkstra’s algorithm net topology, link costs

known to all nodes accomplished via “link

state broadcast” all nodes have same

info computes least cost paths

from one node (‘source”) to all other nodes gives routing table for

that node iterative: after k iterations,

know least cost path to k dest.’s

Notation: c(i,j): link cost from node

i to j. cost infinite if not direct neighbors

D(v): current value of cost of path from source to dest. V

p(v): predecessor node along path from source to v, that is next v

N: set of nodes whose least cost path definitively known


Dijsktra’s Algorithm

1 Initialization: 2 N = {A} 3 for all nodes v 4 if v adjacent to A 5 then D(v) = c(A,v) 6 else D(v) = infty 7 8 Loop 9 find w not in N such that D(w) is a minimum 10 add w to N 11 update D(v) for all v adjacent to w and not in N: 12 D(v) = min( D(v), D(w) + c(w,v) ) 13 /* new cost to v is either old cost to v or known 14 shortest path cost to w plus cost from w to v */ 15 until all nodes in N


Dijkstra’s algorithm: example

Step012345

start NA

ADADE

ADEBADEBC

ADEBCF

D(B),p(B)2,A2,A2,A

D(C),p(C)5,A4,D3,E3,E

D(D),p(D)1,A

D(E),p(E)infinity

2,D

D(F),p(F)infinityinfinity

4,E4,E4,E

A

ED

CB

F

2

2

13

1

1

2

53

5


Dijkstra’s algorithm, discussionAlgorithm complexity: n nodes each iteration: need to check all nodes, w, not in N n*(n+1)/2 comparisons: O(n**2) more efficient implementations possible: O(nlogn)

Oscillations possible: (ADAPTING TOO QUICKLY) e.g., link cost = amount of carried traffic

A

D

C

B1 1+e

e0

e

1 1

0 0

A

D

C

B2+e 0

001+e1

A

D

C

B0 2+e

1+e10 0

A

D

C

B2+e 0

e01+e1

initially… recompute

routing… recompute … recompute


Distance Vector Routing Algorithm

iterative: continues until no

nodes exchange info. self-terminating: no

“signal” to stop

asynchronous: nodes need not

exchange info/iterate in lock step!

distributed: each node

communicates only with directly-attached neighbors

Distance Table data structure each node has its own row for each possible destination column for each directly-

attached neighbor to node example: in node X, for dest. Y

via neighbor Z:

D (Y,Z)X

distance from X toY, via Z as next hop

c(X,Z) + min {D (Y,w)}Z

w

=

=


Distance Table: example

A

E D

CB7

8

1

2

1

2

D ()

A

B

C

D

A

1

7

6

4

B

14

8

9

11

D

5

5

4

2

Ecost to destination via

dest

inat

ion

D (C,D)E

c(E,D) + min {D (C,w)}D

w== 2+2 = 4

D (A,D)E

c(E,D) + min {D (A,w)}D

w== 2+3 = 5

D (A,B)E

c(E,B) + min {D (A,w)}B

w== 8+6 = 14

loop!

loop!


Distance table gives routing table

D ()

A

B

C

D

A

1

7

6

4

B

14

8

9

11

D

5

5

4

2

Ecost to destination via

dest

inat

ion

A

B

C

D

A,1

D,5

D,4

D,4

Outgoing link to use, cost

dest

inat

ion

Distance table Routing table


Distance Vector Routing: overview

Iterative, asynchronous: each local iteration caused by:

local link cost change message from neighbor:

its least cost path change from neighbor

Distributed: each node notifies

neighbors only when its least cost path to any destination changes neighbors then notify

their neighbors if necessary

wait for (change in local link cost of msg from neighbor)

recompute distance table

if least cost path to any dest

has changed, notify neighbors

Each node:


Distance Vector Algorithm:

1 Initialization: 2 for all adjacent nodes v: 3 D (*,v) = infty /* the * operator means "for all rows" */ 4 D (v,v) = c(X,v) 5 for all destinations, y 6 send min D (y,w) to each neighbor /* w over all X's neighbors */

XX

Xw

At all nodes, X:


Distance Vector Algorithm (cont.):8 loop 9 wait (until I see a link cost change to neighbor V 10 or until I receive update from neighbor V) 11 12 if (c(X,V) changes by d) 13 /* change cost to all dest's via neighbor v by d */ 14 /* note: d could be positive or negative */ 15 for all destinations y: D (y,V) = D (y,V) + d 16 17 else if (update received from V wrt destination Y) 18 /* shortest path from V to some Y has changed */ 19 /* V has sent a new value for its min DV(Y,w) */ 20 /* call this received new value is "newval" */ 21 for the single destination y: D (Y,V) = c(X,V) + newval 22 23 if we have a new min D (Y,w)for any destination Y 24 send new value of min D (Y,w) to all neighbors 25 26 forever

w

XX

XX

X

w

w


Distance Vector Algorithm: example

X Z12

7

Y


Distance Vector Algorithm: example

X Z12

7

Y

D (Y,Z)X

c(X,Z) + min {D (Y,w)}w=

= 7+1 = 8

Z

D (Z,Y)X

c(X,Y) + min {D (Z,w)}w=

= 2+1 = 3

Y


Distance Vector: link cost changes

Link cost changes: node detects local link cost

change updates distance table (line 15) if cost change in least cost path,

notify neighbors (lines 23,24)

X Z14

50

Y1

algorithmterminates“good

news travelsfast”


Distance Vector: link cost changes

Link cost changes: good news travels fast bad news travels slow -

“count to infinity” problem! X Z14

50

Y60

algorithmcontinues

on!


Distance Vector: poisoned reverse

If Z routes through Y to get to X : Z tells Y its (Z’s) distance to X is infinite (so

Y won’t route to X via Z) will this completely solve count to infinity

problem? X Z

14

50

Y60

algorithmterminates


Comparison of LS and DV algorithms

Message complexity LS: with n nodes, E links,

O(nE) msgs sent each DV: exchange between

neighbors only convergence time varies

Speed of Convergence LS: O(n**2) algorithm

requires O(nE) msgs may have oscillations

DV: convergence time varies may be routing loops count-to-infinity problem

Robustness: what happens if router malfunctions?

LS: node can advertise

incorrect link cost each node computes only

its own table

DV: DV node can advertise

incorrect path cost each node’s table used by

others • error propagate thru

network


Hierarchical Routing

scale: with 50 million destinations:

can’t store all dest’s in routing tables!

routing table exchange would swamp links!

administrative autonomy

internet = network of networks

each network admin may want to control routing in its own network

Our routing study thus far - idealization all routers identical network “flat”… not true in practice


Hierarchical Routing

aggregate routers into regions, “autonomous systems” (AS)

routers in same AS run same routing protocol “intra-AS” routing

protocol routers in different AS

can run different intra-AS routing protocol

special routers in AS run intra-AS routing

protocol with all other routers in AS

also responsible for routing to destinations outside AS run inter-AS routing

protocol with other gateway routers

gateway routers


Intra-AS and Inter-AS routing

Gateways:•perform inter-AS routing amongst themselves•perform intra-AS routers with other routers in their AS

inter-AS, intra-AS routing in

gateway A.c

network layer

link layer

physical layer

a

b

b

aaC

A

Bd

A.a

A.c

C.bB.a

cb

c


Intra-AS and Inter-AS routing

Host h2

a

b

b

aaC

A

Bd c

A.a

A.c

C.bB.a

cb

Hosth1

Intra-AS routingwithin AS A

Inter-AS routingbetween A and B

Intra-AS routingwithin AS B

We’ll examine specific inter-AS and intra-AS Internet routing protocols shortly


The Internet Network layer

routingtable

Host, router network layer functions:

Routing protocols•path selection•RIP, OSPF, BGP

IP protocol•addressing conventions•datagram format•packet handling conventions

ICMP protocol•error reporting•router “signaling”

Transport layer: TCP, UDP

Link layer

physical layer

Networklayer


IP Addressing: introduction IP address: 32-bit

identifier for host, router interface

interface: connection between host, router and physical link router’s typically have

multiple interfaces host may have

multiple interfaces IP addresses

associated with interface, not host, router

223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

223.1.1.1 = 11011111 00000001 00000001 00000001

223 1 11


IP Addressing IP address:

network part (high order bits)

host part (low order bits)

What’s a network ? (from IP address perspective) device interfaces with

same network part of IP address

can physically reach each other without intervening router

223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

network consisting of 3 IP networks(for IP addresses starting with 223, first 24 bits are network address)

LAN


IP AddressingHow to find the

networks? Detach each

interface from router, host

create “islands of isolated networks

223.1.1.1

223.1.1.3

223.1.1.4

223.1.2.2223.1.2.1

223.1.2.6

223.1.3.2223.1.3.1

223.1.3.27

223.1.1.2

223.1.7.0

223.1.7.1223.1.8.0223.1.8.1

223.1.9.1

223.1.9.2

Interconnected system consisting

of six networks

223.1.9

223.1.3

223.1.8

223.1.7

223.1.1

223.1.2


IP Addresses

0 network host

10 network host

110 network host

1110 multicast address

A

B

C

D

class1.0.0.0 to127.255.255.255

128.0.0.0 to191.255.255.255

192.0.0.0 to223.255.255.255

224.0.0.0 to239.255.255.255

32 bits

given notion of “network”, let’s re-examine IP addresses:

“class-full” addressing:


IP addressing: CIDR classful addressing:

inefficient use of address space, address space exhaustion

e.g., class B net allocated enough addresses for 65K hosts, even if only 2K hosts in that network

CIDR: Classless InterDomain Routing network portion of address of arbitrary length address format: a.b.c.d/x, where x is # bits in network

portion of address

11001000 00010111 00010000 00000000

networkpart

hostpart

200.23.16.0/23


IP addresses: how to get one?

Hosts (host portion): hard-coded by system admin in a file DHCP: Dynamic Host Configuration Protocol:

dynamically get address: “plug-and-play” host broadcasts “DHCP discover” msg DHCP server responds with “DHCP offer” msg host requests IP address: “DHCP request” msg DHCP server sends address: “DHCP ack” msg


IP addresses: how to get one?

Network (network portion): get allocated portion of ISP’s address

space:ISP's block 11001000 00010111 00010000 00000000 200.23.16.0/20

Organization 0 11001000 00010111 00010000 00000000 200.23.16.0/23

Organization 1 11001000 00010111 00010010 00000000 200.23.18.0/23

Organization 2 11001000 00010111 00010100 00000000 200.23.20.0/23 ... ….. …. ….

Organization 7 11001000 00010111 00011110 00000000 200.23.30.0/23


Hierarchical addressing: route aggregation

“Send me anythingwith addresses beginning 200.23.16.0/20”

200.23.16.0/23

200.23.18.0/23

200.23.30.0/23

Fly-By-Night-ISP

Organization 0

Organization 7Internet

Organization 1

ISPs-R-Us“Send me anythingwith addresses beginning 199.31.0.0/16”

200.23.20.0/23Organization 2

...

...

Hierarchical addressing allows efficient advertisement of routing information:


Hierarchical addressing: more specific routes

ISPs-R-Us has a more specific route to Organization 1

“Send me anythingwith addresses beginning 200.23.16.0/20”

200.23.16.0/23

200.23.18.0/23

200.23.30.0/23

Fly-By-Night-ISP

Organization 0

Organization 7Internet

Organization 1

ISPs-R-Us“Send me anythingwith addresses beginning 199.31.0.0/16or 200.23.18.0/23”

200.23.20.0/23Organization 2

...

...


IP addressing: the last word...

Q: How does an ISP get block of addresses?

A: ICANN: Internet Corporation for Assigned

Names and Numbers allocates addresses manages DNS assigns domain names, resolves disputes


Getting a datagram from source to dest.

IP datagram:

223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

A

BE

miscfields

sourceIP addr

destIP addr data

datagram remains unchanged, as it travels source to destination

addr fields of interest here

Dest. Net. next router Nhops

223.1.1 1223.1.2 223.1.1.4 2223.1.3 223.1.1.4 2

routing table in A



223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

A

BE

Starting at A, given IP datagram addressed to B:

look up net. address of B find B is on same net. as A link layer will send datagram

directly to B inside link-layer frame B and A are directly connected


223.1.1 1223.1.2 223.1.1.4 2223.1.3 223.1.1.4 2

miscfields223.1.1.1223.1.1.3data



223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

A

BE


223.1.1 1223.1.2 223.1.1.4 2223.1.3 223.1.1.4 2

Starting at A, dest. E: look up network address of E E on different network

A, E not directly attached routing table: next hop router

to E is 223.1.1.4 link layer sends datagram to

router 223.1.1.4 inside link-layer frame

datagram arrives at 223.1.1.4 continued…..

miscfields223.1.1.1223.1.2.2 data



223.1.1.1

223.1.1.2

223.1.1.3

223.1.1.4 223.1.2.9

223.1.2.2

223.1.2.1

223.1.3.2223.1.3.1

223.1.3.27

A

BE

Arriving at 223.1.4, destined for 223.1.2.2

look up network address of E E on same network as

router’s interface 223.1.2.9 router, E directly

attached link layer sends datagram to

223.1.2.2 inside link-layer frame via interface 223.1.2.9

datagram arrives at 223.1.2.2!!! (hooray!)

miscfields223.1.1.1223.1.2.2 data network router Nhops interface

223.1.1 - 1 223.1.1.4 223.1.2 - 1 223.1.2.9

223.1.3 - 1 223.1.3.27

Dest. next

ppt

Documents

vc network

network architectures

network layer routers

physical links link

network layer service

hosts network layer

network layer chapter

network service model