Portable penetrator-how-to-connect-the-antenna

SecPoint Wi-Fi Adapter Connection Guide 2014

Copyright © 1999-2014 SecPoint® | P a g e 1 of 2

How to connect the Wi-Fi Adapter to Portable Penetrator

Thank you for choosing Portable Penetrator. This guide will help you connect the Alfa awus036h Wi-Fi Adapter to Portable Penetrator.

http://www.secpoint.com/portable-penetrator.html

Alfa AWUS036H – Best for 2.4 GHz Wi-Fi Password Recovery Alfa AWUS051NH – Best for 5.8 GHz can also do 2.4 GHz but AWUS036H is better for 2.4

Ghz

SecPoint Wi-Fi Adapter Connection Guide 2014

Copyright © 1999-2014 SecPoint® | P a g e 2 of 2

Steps to connect the Antenna Please make sure that you are not using the same antenna to connect to Internet via a Wi-Fi Access Point: you cannot audit a Wi-Fi network and connect to another one at the

same time.

1. Once you have installed Portable Penetrator as per the Installation guide, connect the Alfa awus036h Wi-Fi Adapter to your computer using the provided USB Cable and install the drivers.

2. Click on the Player button in the top right of the VMWare Window and hover the mouse through Removable Devices>Realtek RTL8187_Wireless>Connect (Disconnect from host)

3. Once you click on Connect (Disconnect from host), the antenna gets digitally disconnected from your operating system and gets connected to VMWare where Portable Penetrator is running. 4. That is it. Now Portable Penetrator have access to the Alfa awus036h Wi-Fi Adapter and you can run Wireless scan by logging into Portable Penetrator by opening the chrome Brower on the VMWare Desktop, Logging in to Portable Penetrator and then clicking on Wireless>Start Wireless Audit. If you do not already have the Alfa awus036h Antenna then you can order one from our webshop by clicking on this link: http://shop.secpoint.com/shop/alfa-awus036h-1000-253p.html

http://www.youtube.com/watch?v=86TFHIk29Po

http://www.youtube.com/watch?v=fBe9acvsUtE

!

http://www.youtube.com/watch?v=hb25HkAxmws