Email: [email protected] TableDesigns.com Telephone: (727) 375-1212 Hours of Operation: Monday - Friday 9AM - 5PM EST | Address: 11445 Pyramid Drive, Odessa, FL 33556 7. FLIP OVER FOR FINISHED PRODUCT. 6. CONNECT BASE TO COLUMN BY TIGHTENING NUT. 5. FLIP BASE UPSIDE DOWN AND GUIDE ROD THROUGH BASE’S CENTER HOLE 4. SCREW GLIDES INTO BOTTOM OF BASE 3. PLACE COLUMN OVER ROD 2. FLIP SPIDER AND ROD UPSIDE DOWN, THREADED END OF ROD SHOULD FACE UP 1. SLIDE ROD THROUGH TOP OF SPIDER PARTS LIST (1) Rod (1) Nut (1) Spider (1) Column (1) Base (5) glides TOOLS LIST 7/16” Socket Wrench PIETA TABLE BASE ASSEMBLY INSTRUCTIONS
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Email: [email protected] TableDesigns.com Telephone: (727) 375-1212
Hours of Operation: Monday - Friday 9AM - 5PM EST | Address: 11445 Pyramid Drive, Odessa, FL 33556
7. FLIP OVER FOR FINISHED PRODUCT.6. CONNECT BASE TO COLUMN BY TIGHTENING NUT.
5. FLIP BASE UPSIDE DOWN AND GUIDE ROD THROUGH BASE’S CENTER HOLE4. SCREW GLIDES INTO BOTTOM OF BASE
3. PLACE COLUMN OVER ROD2. FLIP SPIDER AND ROD UPSIDE DOWN, THREADED END OF ROD SHOULD FACE UP
1. SLIDE ROD THROUGH TOP OF SPIDER
PARTS LIST(1) Rod(1) Nut(1) Spider(1) Column(1) Base(5) glides
TOOLS LIST7/16” Socket Wrench
PIETA TABLE BASE ASSEMBLY INSTRUCTIONS
Related Documents
