Pierre Winiger Technical Partner Manager Product News.

Pierre Winiger

Technical Partner Manager

Product News

New FAS-Systems

Entry-Level Roadmap

FAS2040

FAS2020

FAS3210

Today 3Q 2011 4Q 2011 1Q 2012 2Q 2012

2USAS

4USATA

FAS2240

FAS2040

432TB

144 Drives

408TB

136 Drives

4,320TB

1,440 Drives

6TB Flash Cache

4,320TB

1,440 Drives

8TB Flash Cache

1,800TB

600 Drives

1TB

Flash Cache

3,600TB

1,200 Drives

3TB Flash Cache2,880TB

960 Drives

2TB Flash Cache720TB

240 Drives

512GB

Flash Cache

New Entry Systems Added to Line

Truly unified Most efficient Extremely flexible

FAS/V3210

FAS2040

FAS/V6240

FAS/V6280

FAS/V3240

FAS/V6210

FAS/V3270

FAS2240

Unified Storage Architecture

FAS2240-2 Front View

FAS2240-2 Rear View

FAS2240-4 Front View

FAS2240-4 Rear View

Processor controller modules

Power Supply/Fan Module

FAS2240 I/O ConnectionsWith Mezzanine Card Option

Optional

FAS2240 Configuration Details

Based on SAS shelves– FAS2240-2 uses DS2246 and internal SAS disks

– FAS2240-4 uses DS4243 and internal SATA disks

– Up to 24 internal disks for both form factors

Same controller PCM used in both models4x GbE ports and 2x 6Gb SAS ports per PCMOptional mezzanine card per PCM

– 2x 10GbE - or -

– 2x 8/4/2 Gb FC (target or initiator mode) - or -

– No card, slot can be left empty

FAS2240 Configuration Details

FAS2240-2 internal disks– 12 and 24 disk orderable configurations– 450GB or 600GB 10K SAS supported at launch

FAS2240-4 internal disks– 12 and 24 disk orderable options – 1TB, 2TB SATA, and 3TB SATA available at launch

FAS2240 Back-end SAS Storage

Supported shelves and modules– DS2246 with IOM6– DS4243 with IOM3– Mixing DS2246 and DS4243 supported

Only applies to FAS2240, not other platforms

Supported disks– All SAS disks supported in above shelves– SSDs are supported externally in DS4243 shelves

Available starting January 2012

Set FAS2240 shelf ID with external SAS storage

FAS2240 Back-end FC Storage

Supported shelves and modules– DS14mk4 with ESH4– DS14mk2 with ESH4

ESH2 is not supported in Data ONTAP® 8.1

– DS14mk2-AT with AT-FCXSupported disks

– 144GB and larger 15K FC disks– 500GB and larger SATA disks

Unsupported disks– Any 10K FC disks– 36GB and 72GB 15K FC disks

FAS2240 Upgrade Guidelines

FAS2240 can be converted to storage shelf– Replace PCMs with correct IOMs – Connect to controller– Assign disk ownership

Existing SAS shelves cannot be converted into FAS2240– FAS2240 always ships as a new system– FAS2240 cannot be created in field by

converting a shelf

FAS2240 Software Bundles Data ONTAP® Essentials included with FAS2240

– Includes ALL protocols at $0 charge

– Performance optimization: FlexShare®

– Storage efficiency: Thin provisioning, deduplication, compression, Snapshot™

– Core management: System Manager, Operations Manager, Provisioning Manager, Protection Manager

– High availability: Cluster failover, RAID-DP®, Snapshot, DSM/MPIO, SyncMirror®, OSSV

– Secure multi-tenancy: MultiStore®

Com

ple

te B

undl

eSnapManager® Suite

+ All Protocols

SnapVault®

FlexClone®

SnapMirror®

SnapRestore®

Optional Bundles

FAS2240 and FAS2040 ComparisonHA Configurations

FAS2040 HA FAS2240 HAProcessor Cores 4x 32-bit 4x 64-bit

Hyperthreading CPU Physical Memory 8GB 12GB

Onboard I/O4x 4Gb FC

8x GbE2x 3Gb SAS

8x GbE4x 6Gb SAS

I/O Expansion Option

Optional 10GbE or 8Gb FC Maximum Spindles 136 144

Management BMC Service Processor (SP)

Data ONTAP® Support 7.3.2+, 8.0.x, 8.1.x 8.1

FAS2240 Performance OverviewSFS2008 NFS

FAS2040 FAS2240 FAS3210 FAS3160 FAS3170 FAS3240 FAS32700

5000

10000

15000

20000

25000

30000

35000

40000

20300

38000

SFS2008 NFS Filesystem Performance (HA Pair)7-Mode

Th

rou

gh

pu

t (I

OP

s)

FAS2240 Performance OverviewOLTP

FAS2040 FAS2240 FAS32100

5000

10000

15000

20000

25000

30000

35000

40000

12600

33900

OLTP Database IOPs (HA Pair)7-Mode

Th

rou

gh

pu

t (I

OP

s)

Data ONTAP 8.1

Data ONTAP 8.1 New Feature Overview

Platform support is the same as for 8.0.x plus new FAS 2240

32-bit aggregate expansion and conversion

Larger 64-bit aggregate sizes

Default Snapshot reserve settings reduced– Aggregate snapshot default = 0% (except when using SyncMirror)– Volume snapshot default = 5%

Compelling storage efficiency enhancements– Deduplication, data compression and cloning

Data ONTAP 8.1 New Feature Overview

Non-disruptive 1-step Upgrade Feature parity with Data ONTAP 7.3.3 and later

– SnapLock

DataMotion for vFiler use case expansion– vFiler migration from faster to slower controllers and from

faster to slower storage media is supported

– Enables non-disruptive ‘down-tiering’ of NFS and iSCSI data

Data ONTAP 8.1 New Feature Overview

All new aggregates will default to 64-bit format– Root aggregate will default to 64-bit format

In-place expansion of existing 32-bit aggregates to the 64-bit format

Physical replication between volumes within different aggregate types

32 64 3264

64-bit Aggregate and Volume Size Limits

Maximum aggregate sizes increase for most systems with 8.1 (both modes) Volume limits remain the same; now full size can be achieved 8.1 volume limits also apply with deduplication & compression enabled

FAS/V ModelAggr & Vol Limit 8.0.x

Dedupe Vol Limit 8.0.x

Aggr Limit 8.1

Vol Limit 8.1

6280, 6240 6080, 6070

100 TB 16TB 162 TB 100 TB

6210 70 TB 16TB 162 TB 70 TB

6040, 60303270, 3170

70 TB 16TB 105 TB 70 TB

3240, 3160 50 TB 16TB 90 TB 50 TB

3210, 3140 50 TB 16TB 75 TB 50 TB

3070, 3040 50 TB 16TB 50 TB 50 TB

2040 30 TB 16TB 50 TB 30 TB

In-place Expansion Overview

Availability– Both 7-mode and C-mode supported

– No license required

– Supported on all platforms

Expansion process– Triggered automatically when aggregate is grown beyond 16TB

– Expands the aggregate and all volumes within the aggregate

– The expansion is in-place, non-disruptive and does not require a data copy

In-place Expansion Overview

Performance Impact– Minimal impact on system throughput

– No interruption to storage services during the expansion process

Space usage– On-box tool available to estimate space required for expansion

1 2 3 4 5 6 7 8 90

1

2

3

4

5

6

Baseline:sys_avg_latency

64-bit expansion:sys_avg_latency

1 2 3 4 5 6 7 8 90

0.51

1.52

2.53

3.54

4.55

Baseline:sys_avg_latency

64-bit expansion:sys_avg_latency

SFS benchmark SPC-1 benchmark

Sample completion timesAggregate size Volume size # of

volumes Usage in

each volume

Completion time

16TB 10G 499 50% ~30hrs

16TB 13TB 1 100% ~28hrs

13TB 12TB 1 30% ~10hrs

13TB 1TB 10 90% ~1hr

13TB 100GB 100 70% ~1hr

13TB 25G 499 66% ~1hr

13TB 400G 40 30% ~1hr

Flash Cache Fast Rewarm

Cache data will preserve in FlashCache– For graceful failures

system halt reboot cf takeover

– Only works with FlashCache (no PAM I support)

No rewarming for non-graceful events– panic

– power cycle

– cf forcetakeover

Automatically on, no need to tweak

SAS Tape Drive Support

Starting with Data ONTAP 8.1, SAS tape drives are supported

Has to be connected directly to a SAS port

Deduplication Enhancements

no license keys any moregeneral performance enhancementswill be enabled by default for new FlexVolsDedup continues after HA failuresno maximum dedup limits any more (equals

maximum volume limit for platform)

Compression Enhancements

Is GA now – no PVR required No license key required Inline & Post-Processing (both or post processing only) Integrated with Deduplication:

- same schedule- New options to dedupe CLI commands

Less limits:- no volume size limits - but still for 64bit aggregates only

Support by System Manager 2.0

OnCommand System Manager 2.0Newest Features: Easier, More Powerful than Before

Management of 7-Mode and clusters

Easy wizard setup and configuration: CIFS, NFS, iSCSI, FC, and FCoE

Simple device management: – Intuitive browser– Dashboard view and graphical reports– Automated workflows

Powerful Data ONTAP features:– Storage efficiency and security– High availability and replication– Virtualization

Platforms:– Windows or Linux– NetApp Data ONTAP software– VMware® ESX™ integration wizard

Record Performance, Linear Scaling on Demand

World-Record NFS Performance

NetApp® FAS6240 systems in 24-node cluster Better performance for demanding NAS workloads Higher efficiency saves infrastructure costs Enterprise-class capabilities for nondisruptive

operations

0

500000

1000000

1500000

Top SPECsfs2008 NFS PerformanceNetApp

Isilon

EMCVNX VG8

IBMSONAS

Linear Scaling on Demand

FAS6240 systems running Data ONTAP® Cluster-Mode Start with the right size cluster for today’s storage requirements Nondisruptive, massive unified scalability to handle future needs Consistently fast response time for demanding applications

4 8 12 16 20 24

Ops/sec 260,388 512,667 765,667 1,007,052 1,261,145 1,512,784

ORT 1.53 1.54 1.55 1.48 1.56 1.53

0

0.5

1

1.5

2

2.5

3

3.5

0

200,000

400,000

600,000

800,000

1,000,000

1,200,000

1,400,000

1,600,000

SPEC

sfs2

008

Ove

rall

Res

po

nse

Tim

e (O

RT)

in m

s

SPEC

sfs2

008

nfs

v3 O

ps/

sec

Number of nodes in cluster

NetApp SPECsfs2008 Performance Scaling

Consistent Response Time

Linear Scaling

Leading Performance and Efficiencyfor Demanding NAS Storage Infrastructure

NetApp delivers better value 35% higher performance 40% faster response time 50% fewer disks 80% fewer controller nodes

NetApp Isilon

Ops Per Second (SPECsfs2008 NFS)

1.51M 1.11M

Response Time 1.53ms 2.54ms

# Disks 1728 3360

# Controller Nodes 24 140

Performance

Efficiency

FAS6240 24-node cluster with Data ONTAP® 8