Distributed by: WE GUARANTEE TO MATCH ALL COMPETITORS PRICES • European Engineering and Design • Supplied with nationally traceable calibration certificates • 12 + 12 Care Warranty Program VALUE + PRECISION TOOL SALE Proudly Supporting the Canadian Metalworking Industry since 1960 THE BEST OF BOTH BRANDS Pricing valid while quantities last or until further notice
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Distributed by:
WE GUARANTEE TO MATCH ALLCOMPETITORS PRICES
• European Engineering and Design• Supplied with nationally traceablecalibration certificates
• 12 + 12 Care Warranty Program
VALUE +
PRECISION TOOLSALE
Proudly Supporting the CanadianMetalworking Industry since 1960
THE BEST OF BOTH BRANDS
Pricing valid while quantities last or until further notice
®®
CCaalliibbrraattiioonn LLaabbRReeppoorrtt
• European Engineering and Design• Supplied with nationally traceablecalibration certificates
• 12 + 12 Care Warranty Program
VALUE +
Asimeto Precision Tools were designed with you in mind. In thequest to meet your precision measurement needs, and toprovide excellent price to performance value, our design teamhas enlisted the craftsmanship of European designers to giveour tools a modern look and a great feel.
Furthermore, our tools conform to national and federalspecifications, and come standard with calibration certificates,so you can be sure that your Asimeto tools are ready to perform.
If innovative design, great value, and superior quality areimportant to you, then choose Asimeto Precision Tools as yourmeasurement partner. Please call for your complete Asimeto
fea tures :• Jeweled bearings• Inch units come with 5/32 & 3/8 dovetail stems• Metric unit comes with 6mm & 8mm dovetail stems• Easy to read yellow face
DIAL TEST INDICATORS
5
®® Value +• European Engineering and Design• Supplied with nationally traceable calibration certificates• 12 + 12 Care Warranty Program
Range Grad. SALE(in.) (mm) Code No. Price $150 .02 200-583 31.96200 .02 200-585 57.55300 .02 200-587 76.42
Metric
• Covered rack• Accurate to .001 per 6"• Made of stainless steel• Clamp for repetitive setting• Deluxe case• .100" Revolution
Standard Fine Adj. Flex StemModel BA-1 BA-1F BA-1X SALECode No. Price $ Code No. Price $ Code No. Price $
MADE IN TAIWAN
225-001 49.56 225-002 62.48 225-003 80.73MADE IN CHINA
225-705 17.09 225-700 18.19MADE IN USA
225-805 73.53
STM MAGNETIC BASES
Range SALE(in x mm) Code No. Price $0-4 x 100 200-642 53.380-6 x 150 200-645 40.380-8 X 200 200-646 73.530-12 x 300 200-647 113.820-24 x 600 200-648 383.440-40 x 1000 200-649 602.06
• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button
Range Grad. SALE(in x mm) (in x mm) Code No. Price $
• Ratchet and lock nut• Complete with standards (2" and up)• Carbide faces• Fitted wood case
MICROMETER SETS DIAL CALIPERS
DIGIMATIC CALIPERS
10
SAVE !PRECISION TOOLS
Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 1/1000 x 1/20 200-210 29.580-8 x 200 1/1000 x 1/20 200-215 35.020-12 x 300 1/1000 x 1/20 200-220 65.82
Range Graduation Jaw Depth SALE(in x mm) (in x mm) (in) Code No. Price $0-12 x 300 1⁄1000 x 1⁄50 3 200-588 76.080-18 x 450 1⁄1000 x 1⁄50 3-1⁄2 200-590 121.720-24 x 600 1⁄1000 x 1⁄50 4 200-592 152.070-40 x 1000 1⁄1000 x 1⁄50 5-1⁄2 200-594 334.390-60 x 1500 1⁄1000 x 1⁄50 6-1⁄2 200-596 759.820-80 x 2000 1⁄1000 x 1⁄50 7-3⁄4 200-598 1,337.31
EF/4
EF/3
EF/6
EF/9
EF/8
EF/7
EF/5
EF/1
Edge and Centre Findersare time saving positioningtools for use on jig boring,milling machines etc.These are used for accurate locating workedges, shoulders, grooves,centre points and scribedlines.
Manufactured from stainless steel, these have permanently engraved graduations.Accurate taperthroughout the length of the gauge. Available with imperial or metric graduations.
Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 .0005 x 0.01 200-540 40.380-8 X 200 .0005 x 0.01 200-541 73.530-12 x 300 .0005 x 0.01 200-542 113.82
Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 1/1000 x 1/20 200-600 24.740-8 X 200 1/1000 x 1/20 200-605 30.860-12 x 300 1/1000 x 1/20 200-610 55.51
• Deluxe heat insulated forged steel frame up to 4"• Chrome clad• Complete with standards (2" and up)• Carbide faces• Ratchet stop for exact and repetitive reading• Fitted case
LARGE DISPLAY DIGIMATIC CALIPERS• Large face for easy reading• Inside, outside, step and depth measurements• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button
VERNIER CALIPERSWITH THUMB LOCK
OUTSIDE MICROMETERS
PARALLEL CLAMPSManufactured from case hardened steel, parallel clamps aredesigned for maximum strength and rigidity.• Equipped with spring clip• Retaining ring
EDGE AND CENTRE FINDERS
VERNIER CALIPERS WITH FINE ADJUSTMENT
H.D. EXTRA LONG VERNIER CALIPERS
BORE GAUGE (TAPER GAUGE)
Range Graduation SALE(in x mm) (in x mm) Code No. Price $0-6 x 150 .0005 x 0.01 200-945 164.140-8 X 200 .0005 x 0.01 200-950 231.03
IP65 SPC OUTPUT
COOLANT PROOFDIGIMATIC CALIPERS• Coolant resistant• Inside, outside, step and depth measurements• Inch/metric conversion• Auto on, auto shutoff• .0005"/.01mm resolution• Zero button
METRIC DEPTH MICROMETERS0-100 mm .01 mm 64 mm 200-440 115.520-100 mm .01 mm 100 mm 200-445 115.520-150 mm .01 mm 64 mm 200-450 138.550-150 mm .01 mm 100 mm 200-455 96.22
Range SALE(mm) Code No. Price $
12/300 mm 200-675 405.7118/450 mm 200-680 584.3824/600 mm 200-690 734.15
COOLANT PROOF DIGIMATIC MICROMETERS• Water resistant• Battery powered 1 year life• Clear, easy to read LCD display• .00005”"/.001 mm resolution• Carbide faces• C/W Ball attachment
COOLANT PROOF DIGIMATIC MIC SET• Water resistant• Battery powered 1 year life• Clear, easy to read LCD display• .00005”"/.001 mm resolution• Carbide faces• C/W Ball attachment
DIGIMATIC MICROMETERSBasic Model• Battery powered 1 year life• Clear, easy to read LCD display• .0001"/.001 mm resolution• Carbide faces• Ratchet stop• Enamel finish• Case included
MICROMETER STANDAn indispensable clamping device forprecise and stable measurements, it ismost useful to speed up productionand quality inspection jobs.
GRANITE SURFACE PLATES 0-LEDGEImported Precision Toolroom Black Granite Surface PlatesThese plates are made of the highest quality – True Black – Fine Grained – Non-porous – Jewel Hardness – Granite available to give years of long lasting service.
Specifications:Compressive Strength 7329 lbs. / in 2Water Absorptivity 0.13%
DEPTH MICROMETERS• Base surface hardened ground• Satin chrome finish• .001" graduations• Complete with fitted case
INTERCHANGEABLE ANVIL OUTSIDE MICROMETERS• Blue enamel finish• Perforated frame• Carbide tipped spindle and anvils
• Ratchet stop and lock nut• Setting standards included• Complete with fitted case
TWIN-COLUMN ELECTRONIC HEIGHT GAUGES• Rigid twin column structure• 6 digit LCD display and minus sign• Functions include: Zero setting, inch/mm conversion, data hold, plus/minus processing
• Large size feed wheel• Lock-on measuring slider• Battery furnished
• 0.01" dual reading digital counter• Double digital counter can be zero-set at any height within range by depressing zero reset button
• Chrome plated double beams• Carbide tipped scriber• With fine adjusting wheel and lock• Supplied with fitted case
COOLANT PROOFDIAL INDICATOR
• Water Resistant• Reverse counter• Stainless steel components• Rotating bezel with clamp• Lugback (1/4" hole)• Interchangeable point• Conforms to AGD 2 standards
1188 PIECE WAVY PARALLEL SET• Consists of 9 pair ranging from 1/2to 1-1/2" in 1/8" height increments
• Complete with fitted case• Made of high quality spring steel, hardened, stress relieved and precision ground
• Guaranteed to size in height and parallelism ±.0002"
TWIN COLUMN DIAL HEIGHT GAUGES
12
SAVE !Precision Tools
SALEDescription Code No. Price $
Co-Ax indicator 200-005 191.34
Here is a rugged holder for indicators for use as lathestops, etc. Lug back
SALEDescription Code No. Price $
Mag. base ind. holder 200-885 9.27
This range of handy magneticstands provide a simple & inexpensive way of holding dial indicators on any flat ferrous surface. To activate simply pull out the basefrom contact face. Available with orwithout fine fitting.
Base Base Mag SALEModel No. Dia. (in.) Height (in.) Pull kg. Code No. Price $MMS/1 1-1/8 1 5 231-138 13.94MMS/DA-4 1-1/8 1 5 231-140 20.83MMS/DA-5 1-3/8 1-3/16 8 231-142 22.02
• Adapts immediately for fast and positive indicating• Suitable for all popular indicators with 5/32" shankor dovetail
• Reach from 0-12" diameter• 1-7/8" capacity
SALEDescription Code No. Price $
Dial test indicator holder 200-815 17.09
SALECode No. Price $200-820 7.99
• Used for measuring concaveand convex surfaces
Set of 4 Gauges .125" –.500"
SALESizes Consisting of: Code No. Price $.010, .015, .020, .025, .030, .040, .050, .060, .070, .080, .090, .100, .120, .140, .160, .180, .200, .220, .240, .260, .280, .300, .350, .400, .450 , .500" in vinyl case26 pc. set with holder 230-005 35.28.5 to 13.0 mm x .5 mm increases26 pc. set with holder 230-010 35.28
SALESizes Consisting of: Code No. Price $Set of 4 Gauges .125" –.500" – Made in USA 220-940 78.54Set of 4 Gauges .125"–.500" – Quality Import 200-713 19.47
Dial Dia. Grad. Range Reading Pt. Length SALE(in) (in) (in) (in) (in) Code No. Price $
SETS• Includes 5/32" and 3/8" mounting shanks and 3/8" bar
Furnished with interchangeable anvils and necessary accessories to perform close tolerance I.D. measurements. The smallest rangemeasurement is .24", the largest is 16". The AGDSeries 2 Dial Indicator furnished in each kit is a rugged top-quality unit.• .0005" graduations• Complete with fitted case
Range Bore No. SALE(in) Depth Anvils Code No. Price $
SALEModel No. Specifications Code No. Price $L 300 CX 1⁄64–17⁄64 x 64ths 9⁄32–1⁄2 x 32nds 225-005 106.85L 300 MX 0.5mm–13mm x 0.5mm 225-010 192.10
1/64–17/64 x 64ths 9/32–1/2 x 32nds 230-015 34.17
TEST INDICATORS AND SETS• White face• Available in bezel or dial• Contact point adjustable through 230°• Fully jeweled movement• Extremely light contact pressure• Clear, easy to read face• Dovetails on top and back for all-around positioning
HALF ROUND COMBINATION HOLDER
• Two-point adjustment• 1/4" shank• For dovetail and 5/32"stem indicators
SELECT-A-POINT KITThe most useful accessory kit for all dial indicators - a complete set of 22 different points, increasing the versatility of your indicators.• Fits all AGD 1, 2, 3, 4 drop style indicators, 4-48 threads
CO-AX INDICATORHigh quality import version ofthe popular Co-Ax Indicator.Includes:• Retaining rod• Centre point feeler• 2", 4" and 6" straight feelers• 4", 8" and 12" curved feelers• .0005" graduations
SUPER MAG• 5 different locations for mounting accessories:– 3 positions 1/4-20 for lug mounts, 1 tapped hole10-32, 1 reamed hole 3/8"
• Size 4-1/2" x 1" x 1-1/4"
DIAL BORE GAUGE SETS
MAG BASE INDICATOR HOLDER DIAL TEST INDICATOR HOLDER SMALL HOLE GAUGE
• Thin style, 1/8" thick• Matched pairs• Made of high grade steel alloy
• Hardened and ground• Tolerance ± 0.0003"
STEEL PARALLEL SETAll 10 Pairs Including Fitted Case
STEEL PARALLEL PAIRS
SALEW x H x L Hole Size Code No. Price $
1/8 x 1/2 x 6 13/64 230-200 7.481/8 x 5/8 x 6 1/4 230-205 8.081/8 x 3/4 x 6 5/16 230-210 8.081/8 x 7/8 x 6 5/16 230-215 8.081/8 x 1 x 6 5/16 230-220 8.08
1/8 x 1-1/8 x 6 3/8 230-225 8.081/8 x 1-1/4 x 6 3/8 230-230 8.081/8 x 1-3/8 x 6 7/16 230-235 8.081/8 x 1-1/2 x 6 1/2 230-240 8.081/8 x 1-5/8 x 6 1/2 230-245 8.08
This range of Vee blocks is made from finely selected tool steel fully hardened to 55-60 HRC. Manufactured and numbered in matched pairs, each pair has two 90° Vees of different capacitieswhich are identical to the Vees of its matching block. The Vee’s are ground central, parallel andsquare with the ends and sides.
SALEBlock Length (in.) Block Width (in.) Block Height (in.) Type Model No. Code No. Price $
Model No.’s - VB/SP/T-30 & VB/SP/T-70 available as set in wooden case DUET/02 231-415 163.59
• Heat treated and case hardened to HRC 55-60• Precision ground and case hardened• Squareness of all sides is within .0001"• Parallel Accuracy 0.0003"• Surface finish 6–16 micro inches• 23 holes–5 are tapped in 3/8-16• Supplied in pairs
Model No. SALENo. Leaves Range Code No. Price $472 34 4 to 84 225-315 46.67156M 28 0.25 to 2.50 mm 225-320 24.995628 28 4 to 80 225-325 26.615617 18 .5” to 7.00” 225-330 22.955629 28 4 to 56 .5-6.0mm 225-335 26.61
• With locking devices
Description Code No. Price $Machinery Handbook 28 180-105 156.00Large Print Version 28 180-115 190.40CD Rom Version 28 180-120 165.30Machinery Handbook Guide 28 180-110 23.90
Used to hold cylindrical workpieces forgrinding. Will hold both itself and thework on any flat ferrous surface,including a permanent magnet chuck(without energizing the chuck.) There are two vees:
• The smaller for workpieces up to.750" diameter and the larger forworkpieces up to 2.500" diameter
SALEDescription Code No. Price $
Magnetic vee blocks 225-710 85.17
Narrow Rules, Depth Gauge Rules
Round End Rules
SALEModel No. Description Graduations Code No. Price $7305-006 6" with clip 32nds one face, 64ths other face 606-156 10.377305-012 12" with clip 32nds one face, 64ths other face 606-158 18.537305-006 6" without clip 32nds one face, 64ths other face 606-160 7.317305-012 12" without clip 32nds one face, 64ths other face 606-162 18.287305-M06 6" with clip 32nds one face, 0.5 mm other face 606-164 10.377305-M12 12" with clip 32nds one face, 0.5 mm other face 606-166 18.537305-M06 6" without clip 32nds one face, 0.5 mm other face 606-168 5.617305-M12 12" without clip 32nds one face, 0.5 mm other face 606-170 13.697305-M15 150 mm with clip mm one face, 0.5 mm other face 606-172 10.377305-M30 300 mm with clip mm one face, 0.5 mm other face 606-174 13.017305-M15 150 mm without clip mm one face, 0.5 mm other face 606-176 7.317305-M30 300 mm without clip mm one face, 0.5 mm other face 606-178 18.28
SALEModel No. Description Graduations Code No. Price $7202-SS6 6" flex, not plated, round end rule with clip 32nds, 64ths 606-180 4.68
Decimal equivalent chart on back7203-SS6 6" flex, not plated, round end rule with clip mm, 64ths 606-182 4.68
Metric equivalent chart on back7202-C06 6" flex, chrome plated, round end rule with clip 32nds, 64ths 606-184 8.08
Decimal equivalent chart on back7203-C06 6" flex, chrome plated, round end rule with clip mm, 64ths 606-186 11.39
Metric equivalent chart on back
TELESCOPING GAUGES
RADIUS GAUGE
FEELER GAUGE
ACME GAUGE
CENTRE GAUGE
SCREW PITCH GAUGE
THREAD MEASURING SETS
MACHINERY HANDBOOK 2288TH EDITION
11--22--33 & 22--44--66 BLOCKS
DIGIMATIC SCALE UNIT
MAGNETIC VEE BLOCKS
SPECIALTY RULES
TOOL MAKER’S V-BLOCK & CLAMP SETS
14
Precision Tools
SALEModel No. Size (in) Code No. Price $YCT-SV20 2-1/2 x 2 230-700 154.70YCT-SV25 3-1/2 x 2-1/2 230-705 187.00YCT-SV30 3-1/2 x 2-7/8 230-710 237.75YCT-SV200 2-3/8 x 2 230-715 474.05YCT-SV250 2-7/8 x 2-1/2 230-720 447.02YCT-SC300 3-3/8 x 3 230-725 568.82
• Body is one solid piece of steel, hardened likethe rest of the sine vise to Rc 58-62
• Dual .200" minute steps for setting small angleswith standard gauge blocks are built into thegauge block roll
• All 7-1/2" x 3" sine vises have small horizontaland vertical vees in the moveable jaw
• Provides a quick and accurate means of holdinga workpiece at an angle for machining, drilling orgrinding
The knife edge is madefrom Spring Steel and ishardened and ground forextended life.
SALEDescription Code No. Price $Pen Scriber c/w carbide point 201-060 4.00Replacement carbide point 201-065 1.28
• Made of alloy steel, black oxide finish
• Collets grip firmly when chuck is tightened
• Knurled finger grip• Range of set 0 - .188"• Supplied in Plastic Pouch• Ideal for holding small tools, rods,wires, taps, etc.
Manufactured from selectedsteel, firm joint calipers areruggedly constructed and wellfinished. Size refers to thelength of the legs, their actualmeasuring capacity is aboutone-third greater than thegiven size of the legs.
Manufactured from selected steel, thelegs are exceptionally rugged and wellfinished. The leg that holds the adjustable point is offset. The locatinglug is incorporated in the straight leg.
SALESize (in.) Cat. No. Code No. Price $
6 JC/6 231-244 7.31
Description Code No. Price $Engineers Black Book Imperial version 180-155 45.70
Description Code No. Price $Fastener Black Book 180-156 46.00
• Imperial Version • Tables • Standards• Grind Wheels • Conversion Factors• Bolts & Nuts • Formulae• Tapers • Keys and Keyways• Tapping Drill Sizes • Speeds and Feeds• Tolerances • G Codes• Spur Gear Calculations • Engineering Drawing • Hardening and Tempering Standards• Sharpening Information • Geometrical Construction • Illustrations • Tungsten Carbide• Lubricants-Coolants • Equivalent Charts
Set 1 SS/A/2-3-4-6 231-045 87.81Set 2 SS/A/2-4-6 231-050 73.02
SALENo. of Blocks Blocks Included Code No. Price $81 piece set 9–.1001-.1009 in .0001 steps, 49–.101-.149 in .001 steps, 200-715 158.10
19–.050-.950 in .050 steps, 4–1.000-4.000 in 1.000 steps
• For those who need a competitively priced B grade set• All blocks are manufactured to the same high standards as our premium sets
• Each set is supplied with a certificate guaranteeing that each block ismanufactured to meet or exceed federal spec GGG-G-15C, and iswithin the grade B tolerance (±.000050)
• This certificate does not show the individual deviation of each block• Each set is provided in a fitted wooden case
Comes with four interchangeable attachments.They can be snapped onto the chuck without removing the collet. Spring tension on the ball ofthe point.
SALEDescription Code No. Price $
Centre Finder complete with 231-300 27.804 attachments WCF/WZ-6
SALERule Length Code No. Price $
6" 231-274 11.82
The ability to measure depths and angles is combined in this versatile tool. The head is madefrom selected steel and has an attractive black finish.It is graduated both left and right to 15°, 30° and 45°and the rule can be set to any of these angles. A 6" (150mm) steel rule is fitted to the head and canbe locked in final position for depth or angular measurements by a knurled nut.
SALEType Code No. Price $Round 231-270 15.56
Rectangular 231-272 16.83
A versatile tool, the Depth Gauge with Protractorallows for measurement of both angles anddepths.• Stainless Steel• Graduations: 0-180° in opposite directions• 6" (150 mm) steel rule
SALEType Code No. Price $Round 231-266 13.94
Rectangular 231-268 15.13
This stainless steel protractor comes with either asemi-circular or a rectangular head. The head has permanently deep etched graduations, 0 to 180° inopposite directions thus permitting reading an angledirectly and also its supplement. The 6" (150 mm)blade has a graduation line on one end that permitsaccurate setting and reading of angles.
• Hardness: heat treated to a hardness of 60-62Rockwell C Drill Rod
• All members 2" long, centreless lapped• Size Electro etched in each piece• Finish: Each gauge inspected and has 10 microfinish or better
• Deluxe box with insert• Tolerance: Minus -.0002"/+.0000"
MS/3-ST 3 interchangeable threaded points, short straight, short bent and long bentMS/4 Single ended light dutyMS / MG/6 Tungsten carbide tip for marking on hard materials. Permanent magnet on the
other end for picking up small metal partsMS/P/3 Scriber point is held by a knurled chuck and can be reversed when not in useMS/ST/9 Single ended heavy dutyMSCP/6 Double ended – combining a needle point with a chisel endMS/7 Double ended with one straight point and one point bent at 90°MS/H/8 Double ended heavy duty with one straight point and the other bent at 90°
ENGINEER’S PRECISION SQUARES
DEPTH GAUGE WITH PROTRACTOR
PRECISION STEEL PIN GAUGE SETS
DEPTH AND ANGLE GAUGE
STANDARD RECTANGULAR GAUGE BLOCKSET WORKSHOP GRADE B
DEGREE PROTRACTORS
UNIVERSAL BEVEL PROTRACTORS
SCRIBERS
WIGGLER OR CENTRE FINDER
Hardened spring steel blades are permanently fixedto the stock by means of tapered self-locking rivetswhich ensure complete rigidity. Both the blade andstock are precisely ground to ensure straightnessand parallelism.
• Made of tool steel• Punch section centreless ground• Handles black oxide for rust prevention• Knurled body for better grip• Hardened both ends, Rc 45 to 52• 8" length, drive pin section 3-1/2" long• Set supplied in fitted pouch with clear size markings
SALEModel No. Description Code No. Price $
P170 Standard duty 606-300 8.84P171 Heavy duty 606-302 22.02P171-P Replacement point 606-304 4.08
• Automatic, spring operated action• Adjustable for very light to heavy strokes• Replaceable point ground and hardened• Used for marking, punching, stalking and riveting
• Made of brass• Punch section centreless ground• Hexagonal body style• Used in spark-free environments• 4" length• Set supplied in fitted pouch withclear size markings
• Made of tool steel• Black oxide finish for rust prevention• Knurled body for better grip• Hardened both ends, RC 45 to 52• 4" length• Supplied in fitted case• Set contains: 5/32" drive pin punch5/32" centre punch and scriber
Stamp SALEDescription Size Code No. Price $
27pc, A - Z, plus “&” stamp 1/8 606-615 29.583/16 606-620 42.251/4 606-625 53.04
Manufactured from high qualitysteel, punches are through induction hardened, which givesdurability and extended life evenafter repeated use.
• One piece construction with roundstriking head.The knurling is cleanand well cut to provide a positivefinger grip. This range of puncheshave a black oxide finish.
• These round shank pin puncheshave clean and well cut knurlingwhich provides positive, non slipgrip. This range of punches have ablack oxide finish.
28 Punches in MetalIndexed Stand• Heat treated temperedsteel
• Consists of one each ofpunch sizes 3/32 thru1/2 x 64th plus 17/32 inmetal indexed stand
• Made of tool steel• Punch section centreless ground• Handles black oxide for rust prevention• Knurled body for better grip• Hardened both ends, Rc 45 to 52• 4" length• Set supplied in fitted pouch with clear size markings
• Made of tool steel• Black oxide finish for rust prevention• Knurled body for better grip• Hardened both ends, RC 45 to 52• Points precision ground• 4" length, 1/16" diameter,punch 3" long
• Set supplied in fitted case with clear size markings
• Single piece construction withhexagonal shank. Single piece construction imparts additional durability to the punch. The pin endis ground with the body in premiumpowder coated finish.
SALEDescription Code No. Price $
5pc set 5/64-3/8 606-640 28.99*7pc set 5/64-3/8 606-645 39.10
• Single piece construction withhexagonal shank, these are oneof the strongest and mostdurable of Centre Punches. Thepunches have ground workingends, with the body in premiumpowder coated finish.