Top Banner
Paul Rubinov TriP-t & AFEII status
9

Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

Dec 21, 2015

Download

Documents

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

Paul Rubinov

TriP-t & AFEII status

Page 2: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

AFE and CFT

9o KVLPC

(x512)

AFE

DISCR ADCDiscriminator output every 396 nsec for L1

Amplitude signal readout for L3 and offline

8 photons

80 fC

Central Fiber Tracker cylinder

Page 3: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

Overview

Ancient history

STOP

build/test TriP for 132ns running

TriP works very well at 396ns and adding time info can

help CFT a lot.

Build TriP-TBuild AFEII

prototype

Summer 04 milestone

Aug 04

Build AFEII (with time Info)by end of 2005

AFE1 problems

Page 4: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

AFEII proto current status

Schematic design is 99% complete. …an internal review has been completed. The review committee made a number of suggestions (minor) and these are being implemented.

Layout of the board is about 80% complete…However, this is going very slowly. Still 3 weeks work left.

This puts the work about 3-6 weeks behind schedule. Has impact on D0. Test of AFE II prototypes with beam this August is now NOT likely.

Specifications for the new microcontroller code requirements are 75% complete…

Design of the FPGA is 75% complete…

Page 5: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.
Page 6: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

TriP

The existing TriP ASIC (7000 die on hand) Lots of testing over about 18 months- described in

Fermi TM 2226, 2227 and 2228

Page 7: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

TriP-t: the new idea

About 1% additional components: 7bits t-info offline: 120ns full scale=> 2ns time => ~35cm

resolution in Z

Page 8: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

TriP-t current status

The chip designers are chip designing. End date is given as Aug ’04 The new chip is the “critical path” item for

the project Assuming D0 makes decision to use Tript

Some prep work going on now We will need new packaging We had some concerns about features

used on the new chip, but where not used on the old (current!) TriP chip.

Page 9: Paul Rubinov TriP-t & AFEII status. AFE and CFT 9 o K VLPC (x512) AFE DISCRADC Discriminator output every 396 nsec for L1 Amplitude signal readout for.

TriP-t prep work

Bench testing

New package