CUTTING LINE SIZE LENGTH (CTR BACK) BUST XS 23½" (59.5 cm) 31–32" (79–81.5 cm) S 24" (61 cm) 33–34" (84–86.5 cm) M 24½" (62 cm) 35–36" (89–91.5 cm) L 25" (63.5 cm) 37–39" (94–99 cm) XL 25½" (65 cm) 40–42" (101.5–106.5 cm) ASSEMBLING FULL-SIZE PATTERN PRINTOUT 1 To ensure that the pattern has printed at the correct scale, check the size of the TEST SQUARE. The Test Square should be 2 × 2" (5 × 5 cm). 2To begin assem- bling the pattern, cut off or fold the dotted margin around each page. 3The pages are numbered in rows, so the first row of pages is numbered 1a, 1b, 1c, etc. Line up the rows and match the dotted lines together so they overlap. Tape the pages together. Use the illustrated guide to match each piece. Once the pattern is complete, find your size, pin the pattern to the fabric, and follow the coordinating line to cut out or trace the pattern. GETTING STARTED Basic techniques & terms you’ll need to know for the pattern you have downloaded. Test Square 2 2" [5 5 cm] LAYOUT, MARKING & CUTTING GUIDELINES 1 Find the lines that correspond to your size and trace the pattern pieces, either on tissue paper or directly onto the fabric, using tracing paper and a tracing wheel. 2If you are cutting pattern pieces on the fold or cutting two of the same pattern piece, fold the fabric in half, selvedge to selvedge, with right sides facing. 3 Lay the pattern pieces on the fabric as close together as pos- sible. Double-check that all pattern pieces to be cut “on the fold” are placed on the fold. 4 Make sure all pattern pieces are placed on the fabric with the grainline running parallel to the lengthwise grain. 5Copy all pattern markings onto the wrong side of the fabric. 6Read through all cutting instructions listed in the project instructions for directions on how many pattern pieces to cut out of your fabric and interfacing. 7Use weights to hold the pattern pieces down and use pins to secure the corners as needed. Cut the pieces slowly and carefully. pattern SIZE CHART Lace Ruffle Tunic by BEKI WILSON CUTTING LINES Multisize patterns have different cutting lines for each size. PLACE ON FOLD BRACKET This is a grainline marking with arrows pointing to the edge of the pattern. Place on the fold of the fabric so that your finished piece will be twice the size of the pattern piece, without adding a seam. GRAINLINE The double-ended arrow should be parallel to the lengthwise grain or fold. NOTCHES Notches are triangle-shaped symbols used for accurately matching seams. Pieces to be joined will have cor- responding notches. DARTS Dashed lines and dots mark darts. The dashed lines show where the stitching will be, and the dot shows the position of the dart point (signaling the point, near the end of the dart, where your stitching should taper down to the end). DRILL HOLES Circles with crossed lines inside indicate an area where a mark needs to be made, oſten indicating dart points, but otherwise explained in the pattern instructions. SLASH MARKS Long lines indicate an area to make a slash. Further instructions for making the slash will be included in the pattern instructions. PATTERN SYMBOLS & MARKINGS place on fold
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Cutting Line Size Length (Ctr baCk) buSt
XS 23½" (59.5 cm) 31–32" (79–81.5 cm)
S 24" (61 cm) 33–34" (84–86.5 cm)
M 24½" (62 cm) 35–36" (89–91.5 cm)
L 25" (63.5 cm) 37–39" (94–99 cm)
XL 25½" (65 cm) 40–42" (101.5–106.5 cm)
Assembling Full-size PAttern Printout1To ensure that the pattern has printed at the correct scale, check the size of the TEST SQUARE. The Test Square should be 2 × 2" (5 × 5 cm).
2To begin assem-bling the pattern, cut off or fold the dotted margin around each page.
3The pages are numbered in rows, so the first row of pages is numbered 1a, 1b, 1c, etc. Line up the rows and match the dotted lines together so they overlap. Tape the pages together. Use the illustrated guide to match each piece. Once the pattern is complete, find your size, pin the pattern to the fabric, and follow the coordinating line to cut out or trace the pattern.
GettinG Started Basic techniques & terms you’ll need to know for the
pattern you have downloaded.
Test Square2 2" [5 5 cm]
Layout, MarkinG & CuttinG GuideLineS
1Find the lines that correspond to your size and trace the pattern pieces, either on tissue paper or directly onto the fabric, using tracing paper and a tracing wheel.
2If you are cutting pattern pieces on the fold or cutting two of the same pattern piece, fold the fabric in half, selvedge to selvedge, with right sides facing.
3Lay the pattern pieces on the fabric as close together as pos-sible. Double-check that all pattern pieces to be cut “on the fold” are placed on the fold.
4Make sure all pattern pieces are placed on the fabric with the grainline running parallel to the lengthwise grain.
5Copy all pattern markings onto the wrong side of the fabric.
6Read through all cutting instructions listed in the project instructions for directions on how many pattern pieces to cut out of your fabric and interfacing.
7Use weights to hold the pattern pieces down and use pins to secure the corners as needed.
8������Cut the pieces slowly and carefully.
pattern
size chArtLace Ruffle Tunicby Beki WiLSon
CuttinG LineS Multisize patterns have different cutting lines for each size.
PLaCe on foLd BraCket This is a grainline marking with arrows pointing to the edge of the pattern. Place on the fold of the fabric so that your finished piece will be twice the size of the pattern piece, without adding a seam.
GrainLine The double-ended arrow should be parallel to the lengthwise grain or fold.
notCheS Notches are triangle-shaped symbols used for accurately matching seams. Pieces to be joined will have cor-responding notches.
dartS Dashed lines and dots mark darts. The dashed lines show where the stitching will be, and the dot shows the position of the dart point (signaling the point, near the end of the dart, where your stitching should taper down to the end).
driLL hoLeS Circles with crossed lines inside indicate an area where a mark needs to be made, often indicating dart points, but otherwise explained in the pattern instructions.
SLaSh MarkS Long lines indicate an area to make a slash. Further instructions for making the slash will be included in the pattern instructions.
PAttern symbols & mArkings
place on fold
interweavestitch.com *
2
pattern
lace ruffle tunicThis pretty cotton jersey tunic is as
easy to wear as it is to make. The deceptively simple design features a lace yoke framed by a ruffle trim attached with gathering stitches to
create a stylish drape.
deSiGned By Beki Wilson[ Photo on page 61; instructions on page 114
of Stitch magazine Spring 2010]
Yoke
45" (114.5 cm) - 60" (152.5 cm) -wide lace fabricXS, S, M, L, XL
fold
selvedges
60" (152.5 cm) -wide cotton jerseyXS, S, M, L, XL
fold
Back
fold fold
Front
selvedges
Sle
eve
Ru
ffle
selvedges
CuttinG Layout
CuttinG Layout
lace ruffle tu
nic
lower fron
tcu
t 1 on fold from
cotton
jersey
lace ruffle tu
nic
backcu
t 1 on fold from
cotton
jersey
lace ruffle tu
nic
front yoke
cut 1 on
fold from
lace fabric
notch
XS S M L XL
XL L M S XS
lace ruffle tunicruffle
cut 1 on fold from cotton jersey
lace ruffle tunic
sleeve
cut 1 cut 1 reverse
from cotton jerseylace ru
ffle tun
ic
1a1b
1c1d
1e1f
2a
2b
2c
2d
2e
2f
3a3b
3c3d
3e3f
lace ruffle tunic
1a
1b
1c
1d
lace ruffle tunic
sleeve
cut 1 cut 1 reverse
from cotton jersey
1e
lace ruffle tunic
sleeve
cut 1 cut 1 reverse
from cotton jersey
1f
XS
S M
L X
L XL
L M
S X
S
lace
ru
ffle
tu
nic
ruff
lecu
t 1
on f
old
from
co
tton
jers
ey
2a
lace ruffle tuniclower front
cut 1 on fold from cotton jersey
2b
lace ruffle tuniclower front
cut 1 on fold from cotton jersey
2c
lace ruffle tunicback
cut 1 on fold from cotton jersey
2d
lace ruffle tunicback
cut 1 on fold from cotton jersey
lace ruffle tunic
sleeve
cut 1 cut 1 reverse
from cotton jersey
2e
lace ruffle tunic
sleeve
cut 1 cut 1 reverse
from cotton jersey
2f
lace
ru
ffle
tu
nic
ruff
lecu
t 1
on f
old
from
co
tton
jers
ey
3a
3b
3c
3d
lace ruffle tunicfront yoke
cut 1 on fold from lace fabric
notch
3e
lace ruffle tunicfront yoke
cut 1 on fold from lace fabric
notch
3f
Related Documents
