This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• 304 Stainless Rivet/Mandrel---3/16” Grip Range• Available in 31 standard architectural colors
• Fasten fiberglass or polycarbonate roof sheets together at the overlap• 316 Stainless screw & washer assembled to rubber sleeve
• Attach plywood or structural lumber to steel framing or structural steel
• Attach rigid insulation to wood or light gauge steelframing
• Wafer Head & Pancake Head for metal standing seam • Applications into wood or steel available with RUSPERT coating or 304 Stainless Steel
*Note: ROLLING CHANGE - The new Micro-Bit™ will completely replace the Type 17 sharp point as current inventories are depleted.
MAXX ™FASTENING SYSTEM
MAXX
• Metal to metal self-drill up to .210” steel thickness.• Stitch screw used to fasten 2 layers of 26 gauge sidelap metal.
LOW PROFILEECLIPSE™
• T-30 Round Head metal to metal self-drill up to .210” steel thickness.
ZXL™ FASTENING SYSTEM40 YEAR WARRANTY
ZXL
• Metal to metal self-drill up to 0.210” steel thickness .• 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head.• Stitch screw used to fasten 2 layers of 26 gauge sidelap metal.
HEAVY GAUGE40 YEAR WARRANTY
ZXL HG™ HG
• Metal to metal self-drill up to .500” steel thickness.• ZXL™ HG 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head.
REPLACEMENT40 YEAR WARRANTY
ZXL TAPPING TAPPING
• ZXL™ Tapping is a #14/#17 Diameter replacement screw.
• #17 Diameter replacement screw for original screws that have stripped out.
KWIKSEAL® FASTENING SYSTEM
KWIKSEAL MB
™MB• Metal to Wood Micro-Bit drill point.• Carbon steel with POWDERFUL powder paint.• Stitch designed to fasten 2 layers of 29 gauge sidelap metal.
LOW PROFILEECLIPSE MB
™MB• T-25 Round head Metal to Wood Micro-Bit drill point.
* See Note at Bottom of Page
ZXL™ MB FASTENING SYSTEM40 YEAR WARRANTY
ZXL MB
™MB• Metal to Wood Micro-Bit drill point.• 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head• Stitch designed to fasten 2 layers of 29 gauge sidelap metal.
REPLACEMENT40 YEAR WARRANTY
ZXL TAPPING #14 TYPE 17 TAPPING
• ZXL Tapping is a #14 Diameter sharp point replacement.
• 5/16” HWH Replacement screw for nails or smaller screws that have stripped out.
• 3/8” HWH Replacement screw for nails or screws that have stripped out.
STAINLESS STEEL FASTENERS40 YEAR WARRANTY
HSS™ SS™ ST-XL™
™MB• Metal/Aluminum to wood sharp point.• HSS threads/micro-Bit drill point are hardened to self-drill through steel up to 24 gauge• SS has a non-hardened tip & requires a pre-drilled hole.
• Metal to Wood Micro-Bit drill point.• 1/4” CHWH 304 Stainless Steel cap.• ST-XL stitch will remain as a sharp point until inventory is depleted.* See Note at Bottom of Page
• HWH Short & Long magnetic sockets• HWH Long spring retainer sockets for non-magnetic screws
/
• Acrylic & Urethane sealants for use on substrates such as steel, aluminum, wood, & concrete.
• Square ROOFJACK that conforms to any roof configuration• Available in EPDM & Hi-Temperature Silicone for high heat applications
• Snow & ice protection guard for post-frame buildings• Available in 28 powder coated colors
*Ventilated roll product for metal roof ridge cap applications*Non-woven, UV resistant, polyester fabric with an acrylic binder
• Square/Phillips combination driver for Pancake & Wafer screws• 6-Lobe driver for ECLIPSE MB WOODBINDER & STEELBINDER
100 Series MRS
• Silicone sealant that is solvent free.• Excellent choice for attaching ROOFJACK to GALVALUME coated substrate.• Available in all major metal roof manufacturer colors.
• Round ROOFJACK that conforms to any roof configuration.• Available in EPDM & Hi-Temperature Silicone for high heat applications
• Expansion anchor attaches equipment & metal base angles to concrete.
• Retrofit Round ROOFJACK for applications where standard flashing cannot be used• Stainless teeth firmly secure the boot.
• Open cell foam formulated for maximum air flow • Good choice for angled/hip metal roof applications.
EMSEAL® AST
• Foam Tape infused with water-based acrylic asphalt emulsion.• Good alternative to butyl tape sealant & other foam strips for use on roof applications.
• Laminated polyethylene foam die-cut to conform to metal roof profiles to close gaps• Applications include ridge & eave metal
• 100% solids, asbestos free butyl tape sealant• Applications include metal roof side laps, ridge vents, flashings
• EPDM ROOFJACK designed for extreme angle applications up to 65 degrees.
• Fix-A-Flash is designed to cover oversized holes with smaller pipe penetrations.• Available in Black EPDM & Hi-Temperature Silicone for high heat applications.
• 25’ Polyurethane foam strips used to close voids in metal roof applications
• Anchor designed for light duty & tamper proof applications to masonry---brick, block or stone
EXPANSION JOINT
• Expansion Joint roll flashing is designed for transition walls, parapet walls, stepped roofs, roof penetrations.• Material is ozone resistant EPDM with flexible/shapeable aluminum bands.
FIX-A-FLASH
• Retrofit Square ROOFJACK for applications where a standard flashing will not work.•Fasteners snaps & cable tie secure the boot.
• Snow & ice protection for residential standing seam metal roof applications