Technical Information Dyneon ™ Polymer Additive 5959 PA 5959 For use as a drip suppressant in flame retardant formulations Features • Improves drip suppression in flame retardant polymer formula- tions • For melt strength improvement • Designed for latex blending • Manufactured using Dyneon™ADONA™ Emulsifier Typical properties* Property Test Method Unit Value Solid content DIN EN ISO 12086 % 58 Emulsifier non ionic Emulsifier content (based on solid content) DIN EN ISO 12086 % 5 Average particle size DIN ISO 13321 nm 220 pH DIN ISO 976 > 9 Viscosity D = 30 s -1 DIN EN ISO 3219 mPa-s 12 *typical values Processing The dispersion can be processed undiluted or diluted with distilled or deionised water. Supply form Standard Packaging Approx. Weight of dispersion (wet) approx. 30 liter plastic drum (7.9 US gallons) 40 kg (88 lbs) 30 gallon plastic drum 160 kg (350 lbs.) 1000 liter IBC container (264 US gallons) 1500 kg (3306 lbs) Storage and Material Handling This aqueous dispersion must be protected from freezing. It should be stored at temperatures between 5 °C – 30 °C (41 °F and 86 °F). Although it has a minimal tendency to settle, it is recommended at Dyneon dispersion be homogenized every month by slowly rolling for four hours on a drum roller.
2
Embed
PA 5959 Englischmultimedia.3m.com/mws/media/688878O/td-pa-5959-eng.pdf · PA 5959 For use as a drip suppressant in flame retardant ... Dyneon™ADONA™ Emulsifier ... Dyneon™ PA
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Technical Information
Dyneon™ Polymer Additive 5959 PA 5959 For use as a drip suppressant in flame retardant formulations
Features • Improves drip
suppression in flame retardant polymer formula-tions
• For melt strength
improvement • Designed for latex
blending
• Manufactured using Dyneon™ADONA™ Emulsifier
Typical properties* Property Test Method Unit Value
Solid content DIN EN ISO 12086 % 58
Emulsifier non ionic
Emulsifier content (based on solid content)
DIN EN ISO 12086 % 5
Average particle size DIN ISO 13321 nm 220
pH DIN ISO 976 > 9
Viscosity D = 30 s-1 DIN EN ISO 3219 mPa-s 12
*typical values Processing The dispersion can be processed undiluted or diluted with distil led or deionised water. Supply form
Standard Packaging
Approx. Weight of dispersion (wet) approx.
30 liter plastic drum (7.9 US gallons) 40 kg (88 lbs)
30 gallon plastic drum 160 kg (350 lbs.)
1000 liter IBC container (264 US gallons) 1500 kg (3306 lbs)
Storage and Material Handling This aqueous dispersion must be protected from freezing. It should be stored at temperatures between 5 °C – 30 °C (41 °F and 86 °F). Although it has a minimal tendency to settle, it is recommended at Dyneon dispersion be homogenized every month by slowly rolling for four hours on a drum roller.
Dyneon™ PA 5959 Polymer Additive Safety/Toxicology To avoid potential hazards (including the evolution of toxic vapors) associated with processing this material, please read and follow the information on the product la-bel and in the Material Safety Data Sheet available to your Dyneon sales represen-tative before using the product. ISO 9001 Indicative of our commitment, most Dyneon design, development, production and service facilities have achieved global ISO 9001 quality management certification. One of our Decatur, Alabama sites and the remote functions in Oakdale, Minne-sota have achieved a QS-9000 certification for our quality management system. That Decatur, Alabama site and all Germany location, as well as the production fa-cilities at Antwerp, Belgium have also received ISO 14001 certification for their environmental management system. And, our Aston Pennsylvania PTFE custom compounding facility has A2LA accreditation for its quality control laboratory. Technical Information Technical information, test data and advice provided by Dyneon personnel are based on information and tests we believe are reliable and are intended for per-sons with knowledge and technical skil ls sufficient to analyze test types and con-ditions, and to handle and use raw polymers and related compounding ingredi-ents. No license under any Dyneon or third party intellectual property rights is granted or implied by virtue of this information. The present edition replaces all previous versions. Please make sure and inquire if in doubt whether you have the latest edition.