OWG000207 MSOFTX3000 Number Analysis Configuration ISSUE2.0

Huawei Confidential. All Rights Reserved

OWG000207 MSOFTX3000Number Analysis Configuration

ISSUE 2.0

2 Internal Use

This course gives a general

introduction to related concepts,

procedures of number analysis,

and examples.

3 Internal Use

Upon completion of this course, the trainees should be able to:

Understand concepts of number analysis

Master processes of number analysis

Master steps of number analysis

Master basic commands for number analysis

Course ObjectivesCourse Objectives

4 Internal Use

MSOFTX3000 OM-Data Configuration Co

nfiguring Number Analysis Data

DocumentationDocumentation

5 Internal Use

Chapter 1 Chapter 1 Basic concept

Chapter 2Chapter 2 Procedures

Chapter 3Chapter 3 Data configuration

Chapter 4Chapter 4 Examples

6 Internal Use

Basic ConceptsBasic Concepts

Call Source and Call Source Code: Call source refers to a subscriber or incoming trunk originating a call.

Each call source has an integral number: call source code.

For the MSOFTX3000, incoming calls may come from A interface, Iu

interface and incoming trunk.

Dialed Number Set : It is a set of dialed numbers or prefixes. It is associated with the call

ed number prefix.

Relationship between Call Source and Dialed Number Set: One number initial set may relate to multiple call sources, while one

call source should relate only to one number initial set.

7 Internal Use

Call Prefix: Call prefix is a number segment cut from a called

number; the cut starts with the first digit of the called

number.

Adopts the rule of the longest number matching


8 Internal Use

Route Selection Source Code: The route selection source code specifies different outgoing routing strategies of

different call sources. The route selection source code relates to the call source.

Route Selection Code : A route selection code indicates a routing strategy for calls with a certain prefix.

The route selection source code is related to the caller.

The route selection code is related to the called.


9 Internal Use

Failure Source Code : The failure source code numbers different processing methods for the connection

failure of calls from different call sources.

Different causes may relate to different connection failure processing methods,

such as route reselection, signal tone playing, or triggering NCSIDP4.


10 Internal Use

Secondary Number Analysis: If a number is changed during the number analysis process, the secondary numb

er analysis is needed in order to determine the outgoing route. The secondary nu

mber analysis can be done in the following two ways:

MSISDN, the MSOFTX3000 will get the route information of the callee from HLR.

If HLR returns a roaming number or forwarded-to number, the MSOFTX3000 will

conduct a second number analysis (that is, it will analyze the call prefix again acc

ording to the number that HLR returned) to find the outgoing route.

A called number is changed through the prefix processing. If the processing type

is "reanalysis" (conduct number analysis again), the MSOFTX3000 will also carry

out the secondary number analysis, that is, to analyze the changed number with t

he call prefix analysis table to find the outgoing route.


11 Internal Use

Number Change : Insert Delete Change

Number can be changed in many places : Incoming pre-processing Internal number analysis Outgoing pre-processing Etc.

Almost all kinds of number can be changed : Calling Called FWD Bill MSRN etc.


12 Internal Use

Call authority check : Certain class of subscribers is only allowed to dial specified numbers.

Some subscribers are not allowed to dial certain numbers.

Play announcements to the caller when the call is forwarded in the local office.

Service Check:Check whether a caller is authorized to make calls.

You can set the service check type, check mode, and

conversation duration restriction.


13 Internal Use

Wildcards:The wildcards that are often used in number analysis are:

eeeeeeee: Stands for any call prefix.

65534: Stands for all call sources


14 Internal Use


EARLY ACM:

On receiving Initial Address Message (IAM) from the previous office, the

local office confirms that the called number is received completely and

promptly sends ACM back to the previous office before the callee respo

nds.

15 Internal Use


Forwarded-to Number : When the local office is the

terminating office, if a call is forwarded at the local office,

the number to which the call is forwarded is called the

forwarded-to number at the local office.

Original Called Number : When a call is forwarded for

once or times, the first called number is called the

original called number.

Connected Number : When a call is originated from the

local office (originating office) and is forwarded from

terminating office B to office C, the final called number

sent by terminating office B to the local office is the

connected number.

16 Internal Use





17 Internal Use

Procedures of Number AnalysisProcedures of Number Analysis

Incoming called No. change

Called No change from local MS

FWD No change

MSRN change

Common No processing

Paging to called

SRI

Change for outgoing No.

18 Internal Use

Outgoing to other offices.PSTN, MSRN belong to others, MSISDN of others PLMN

SRI Req. to HLRMSISDN in own PLMN

Paging to called partLocal MSRN

ProcessingCalled Part

Procedures of Number AnalysisProcedures of Number Analysis

19 Internal Use

Chapter 2 ProceduresSection 1 Incoming Number PreprocessingSection 2 Internal Number AnalysisSection 3 Outgoing Number PreprocessingSection 4 Others Number ProcessingSection 5 Related flows

20 Internal Use

Incoming Number Preprocessing Incoming Number Preprocessing

Normalize the format of number: Called/Calling Number

MSRN in SRI Ack

FWD Number

Number in IN flow

receive-number delay: Ensure the completeness of numbers entered

21 Internal Use

Call from local Sub.

LAIGCI


Call source

Incoming number pretreatment table

Number changeIncoming calling number associated process table

Incoming original called number correlation processing table

22 Internal Use

Call from Trunk

Trunk group

Call source

Incoming number pretreatment table

Number changeIncoming calling number associated process table

Incoming original called number correlation processing table


23 Internal Use


24 Internal Use

Internal Number AnalysisInternal Number Analysis

Response to analyze number and choice route: Key step for number analysis

Key step for routing

25 Internal Use

Internal Number AnalysisInternal Number Analysis

Number prefix

Call authority check

Service check

Calling number analysis

Calling number attribute analysis

Supplementary Signaling

Number initial processing

Route Analysis

Enhanced route processing

Failure processing

Number change

Outgoing Number Preprocessing

Outgoing Call

26 Internal Use


27 Internal Use

Outgoing Number PreprocessingOutgoing Number Preprocessing

Customize the format of number: Called/Calling Number

FWD Number

Number in IN flow

28 Internal Use

Outgoing number preprocessing

Outgoing calling number correlation processing

Outgoing original called numbers correlation processing

Calling / Called / Original Called Number


29 Internal Use

Trunk Group Bearer

Trunk Group Bearer Index

NumberChange Table

Changed NumberIn Signaling

Number Change Index

Index Number


30 Internal Use


31 Internal Use

Others Number ProcessingOthers Number Processing

Caller identification processing: For CLIP service\

Auxiliary number processing: For CoLP service

MAP interface number processing; Customize MSISDN number in SRI Req

Bill number processing: Change number in CDR

32 Internal Use


33 Internal Use

Result after Number Analysis: PSTN

MSISDN

MSRN (Local Office)

MSRN (Others Office)

Related processing flows are different based on different types of

number

Related flowsRelated flows

34 Internal Use

Related flows——PSTNRelated flows——PSTN

PSTN

Number prefix table

Route Select Code

Call source

Route Select Source Code

Route analysis table

(CIC, for IAM) DPC

Send out IAM

Call source table

Route table

Sub route table

Trunk group table

Trunk circuit Office table

MTP Route

MTP DSP

MTP Link-set

MTP Links

35 Internal Use

Related flows——MSISDNRelated flows——MSISDN

MSISDN

Number prefix

MSISDN / RSC: 65535

GT translate (MSISDN)

DPC

Send out SRI REQ

SCCP GT

MTP Route

MTP DSP

MTP Link-set

MTP Links

36 Internal Use

Related flows——MSRN (Local Office)Related flows——MSRN (Local Office)

MSRN (Local)

Number prefix

MSRN / RSC: 65535

LAI

BSC DPC

DPC

Query VLR

LAI/GCI table

BSC table

Paging Response

CIC for Assignment

BSC Table

AIE Trunk group

AIE Trunk Circuit

Send out Paging

MTP Route

MTP DSP

MTP Link-set

MTP Links

37 Internal Use

Related flows——MSRN (Others office)Related flows——MSRN (Others office)

MSRN (Other office)

Number prefix

Call source

Call source table

MSRN / Route Select Code Route Select Source Code

Route analysis table

(CIC, for IAM) DPC

Send out IAM

Route table

Sub route table

Trunk group table

Trunk circuit Office table

MTP Route

MTP DSP

MTP Link-set

MTP Links

38 Internal Use





39 Internal Use

Configuring Preset Data Before Number Configuring Preset Data Before Number Analysis Analysis

Configuring call source: ADD CALLSRC

Configuring number change: ADD DNC　 (32 types)

40 Internal Use

Configuring Incoming Call Number Configuring Incoming Call Number Preprocessing DataPreprocessing Data

Configuring Incoming Calling Number Associated Process Data ADD INCLRIDX

Configuring Correlation Processing Data of Incoming Original Called Number ADD INORICLDIDX

Configuring Incoming Number Pretreatment ADD INNUMPREPRO

41 Internal Use

Configuring Number Analysis DataConfiguring Number Analysis Data

Call prefix: ADD　 CNACLD

Enhanced route processing:　 ADD　 SUPERRT

Call authority check: ADD　 CALLPRICHK

Service check:　 ADD　 SRVCHK

Supplementary Signaling:　 ADD AUSSIG

Calling number analysis:　 ADD　 CNACLR

Calling number attribute analysis: ADD　 CLICRTANA

Number initial processing: ADD　 PFXPRO

Failure processing:　 ADD　 CFPRO

42 Internal Use

Configuring Outgoing Number Configuring Outgoing Number Preprocessing DataPreprocessing Data

Configuring Outgoing Calling Number Correlation Processing Data ADD OUTCLRIDX

Configuring Outgoing Original Called Number Correlation Processing Data ADD OUTORICLDIDX

Configuring Outgoing Number Preprocessing Data ADD OUTNUMPREPRO

43 Internal Use

Configuring Trunk Bearer DataConfiguring Trunk Bearer Data

Trunk group bearer: ADD　 TGLD

Trunk group bearer index: ADD　 TGLDIDX

44 Internal Use

Configuring Others Number Processing DataConfiguring Others Number Processing Data

Configuring CLIP Called Correlation Processing Data: ADD CLCRPRO

Configuring CLIP Processing Data: ADD CLIPRO

Configuring Auxiliary Number Processing Data: ADD AIDNUMPRO

Configuring MAP Interface Number Processing Data: ADD MAPIFNP

Configure Bill Processing Information: ADD BILLPROC

Configuring Bill Control Data: ADD BILLCTRL

45 Internal Use

Notes:Notes:

Service Attribute, follow rules: National number: National toll.

International number: International toll .

Local MSISDN: PLMN Local MSCs.

National MSISDN: PLMN National Toll MSC .

Home MSRN: PLMN Home MSC .

Local MSRN: PLMN Local MSCs .

National MSRN: PLMN National Toll MSC .

Voice mail number: PLMN Local MSCs .

Service call: Local .

Entertainment: Local .

Information number: Local .

Local PSTN: Local

46 Internal Use

Notes:Notes:

Route Selection Code: TUP/ISUP call: Specify right codeInclude: PSTN/ MSRN/HOW others office / MSIS

DN other PLMN

MSISDN/ Local MSRN/HON: 65535

For international MSRN: Number prefix: 0

Number prefix set: 9

Number type: PSTN.

47 Internal Use

QuestionsQuestions

What’s different between calling number analysis and calling number

attribute analysis?

What’s different between calling number analysis and number initial special

processing?

48 Internal Use

AnswerAnswer

1 calling number analysis: based on calling number;

calling number attribute analysis: based on attribute

calling number attribute analysis is only used when

calling number analysis was not used;

2 calling number analysis: based on calling number;

number initial special processing: based on called

number.

49 Internal Use





50 Internal Use

ExamplesExamples

Example 1: Play announcement when call failure

Example 2: Play announcement for 117 (Time announcement)

Example 3: MS calls PSTN

Example 4: PSTN calls MS

51 Internal Use

SummarySummary

After finish this course: Trainees can master functions and steps

for number analysis.

Also can be familiar with commands and

relations between them..

SummarySummary

Huawei Confidential. All Rights Reserved

OWG000207 MSOFTX3000 Number Analysis Configuration ISSUE2.0

Documents

route selection

incoming number

number initial

outgoing number

incoming calling

calling number

dialed number

original called