This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Pole Order Code: - - -Series Height Finish Options
U6#1
#2
#3
#4
Series Optics Mounting OptionsFixture # Light Engine
-
Rivnut Pairs
RN - - - - - - - -
Fixture #
CCT Finish Voltage
* Refer to chart on page 4 for Rivnut locations
*Rivnut Locations
U6
U6
U6
LED WARRANTY
5YEAR
Optics
Fixed Mounting
SBx Short Pole Bracket Sistema Mount
SQx Square Pole BracketSistemaMount
*May be combined with adjustable mounting
* Refer to page 4 for locating mountings
R1 Type I
R2 Type II
R3 Type III
R5R Type V (Round)
R4 Type IV
R5S Type V (Square)
PP Plane Projector
R3W Type III (Wide)
R5Q Type V (Rectangu-lar)
Light Engine
CCT
Adjustable Mounting
Finish WH White
BK Black
BZ Bronze
SP Specify Premium Color
Voltage UNV
Options
32700K and 3000K are IDA-Approved
*For other CCT, please consult factory
SV Silver
303 3000K
40 4000K
8 120V, 240V or 277V only
7 120V or 277V only
6 DM, HLXX, TLR or IMS only. Cannot be combined.
5 Type I, II, III, and IV only
9 Glass is included with CO and PP options and does not need to be specified separately
BL Semi-Matte Black
120- 277
HS5 House Side Shield (180°)
DM6 Dimming (0-10V)
GL9 Tempered Glass Lens
TLR6,8 Twist Lock Receptacle 7-Pin with Shorting Cap
HL306,8 Hi-Lo Switching Low Output 30%
HL506,8 Hi-Lo Switching Low Output 50%
AT1 Adjustable Tilt
AS Adjustable Swivel
XX None
1204 120V
2404 240V
2774 277V
347 347V
480 480V
4Specify for HLXX option
Pole Motion Sensor with optional photocell See page 11 for order code
2 347/480V and HLXX options cannot be combined with 5G140
* Based on RI distributions at 3000K CCT no glass
Power Cord Length
8 10 12 14 16 18 XX8’ 10’ 12’ 14’ 16’ 18’ XX’
CO9 Comfort Optics (Not available with PP optics)
* Add length of arm and height of pole to determine power cord length
TLRP8 Twist Lock Receptacle3-Pin with Photocell
IMS6,7
Internal Motion Sensor
273 2700K
1 AT mounting not IDA approved
- - - - - --
-
-
-
- -
- - - - -- - -
- - - - -- - -
- - - - -- - -
5G350 77W/8,561lm
5G530 107W/12,450lm
5G700 148W/15,576lm
5G105 230W/21,623lm
5G1402 306W/25,707lm
Page 2 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
1. Fixture Housing - Die cast low copper marine grade aluminum body and door. Optional tempered glass lens.
2. Gasketing - Continuous molded silicone gas-ket provides weatherproofing, dust and insect control at all luminaire connections.
3. Access Door - Die cast low-copper marine grade aluminum door. Hinges open for tooless access to LED light engine and is retained in place with fixed hinge.
4. LED Array - High Flux LEDs mounted to metal core PCB and attached to external heat sink for maximum LED performance and life. CCT tolerance within a 3 step bin and provided with a minimum CRI of 80. LED array has a reported lumen maintenance of 93% at 50,000 hours. L70 calculated greater than 100,000 hours. Exposed face rated to IP65.
5. LED Optics - Technical Optics (R1, R2, R3, R3W, R4, R5S, R5Q, and R5R) use Selux signa-ture light pattern acrylic lens holder to secure proprietary silicone optics. Internal micro house side shield available for distributions types I, II, III and IV. Plane Projector (PP) optics available for uplighting. Comfort Optics (CO) option provided with fully diffuse glass.
6. LED Driver - LEDs are driven by RoHS com-pliant constant current programmable LED driver. Driver includes 0-10V dimming to 10%, meets the requirements of IP66. Driver assembly located inside the head and accessible through the hinged door. 7. Surge Protection - 3-Pole Surge Protection device safeguards electrical components from indirect lighting strikes and surges up to (20kA standard). RoHS compliant.
Exterior Luminaire Finish -Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatmentprocess where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accor-dance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are avail-able, please specify from your Selux color selec-tion guide. Hot Dip Galvanized finish (GV) on all steel parts also available.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that Ouray LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the fixture, LED driver and LED light engine when in-stalled and operated according to Selux instruc-tions. Fixture suitable for ambiant temperatures of 45ºC (113ºF). For details and exclusions, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Tested to IESNA LM-79-08 and LM-80 test sandards at 25ºC ambient temperature. Rated for wet location.
Visit selux.us for our LED End of Life recycling policy.
Page 3 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Adjustable arm located between fixture head and fixed mounting.
AT Adjustable Tilt
AS Adjustable Swivel
EPA = 0.1ft2 (0.01m2)
Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.
EPA = 0.1ft2 (0.01m2)
Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.
21516 "
75mm
21516 "
75mm
6 18 "
155mm6 18 "
155mm
21516 "
75mm
2 1516"
75mm
2 15/16” (75mm)
2 15/16”(75mm)
6 1/8” (155mm)
6 1/8” (155mm)
2 15/16” (75mm)
2 15/16” (75mm)
Tilt +/- 90° in 2.5° increments Swivel +/- 90° in 2.5° increments
Page 4 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Use checkboxes provided in chart below. Columns #0 through #9 indicate heights starting with 3" (76mm) + 9" (229 mm) below top of pole and proceeding downwards in increments of 12 inches (305mm). Rows A,G,M, and S indicate angular placement around pole starting with 0° at handhole and proceeding clockwise.
(NOTE: If using Adobe Acrobat to enter data (checks) in chart on right, the following instructions will be carried out automatically)
When specifying non-standard configurations, enter “SB/SQ + total number of arms specified)” on con-figuration matrix on page 1 in the fixture mounting field. Example: SS4 (specifying 4 mounting arms)
Build up the Mounting Arm Location Codes from chart on right (“Height Code” + “Angular Location Code”) i.e. “4G”= 4 feet from top of pole, 90º clockwise from handhole.
Enter Mounting Arm Location Codes on page 1 in the blanks provided that follow the Pole Option blanks. Example: 0A-2G-0M-2S
(1) Pair of Rivnuts required per arm.
ANGULAR LOCATION CODE
CLOCKWISE FROM HANDHOLE
DISTANCE FROM TOP OF POLE
HEIGHT CODE NOTE: Arms mounted at same height level must be spaced apart at 180º, unless AT or AS mounting is specified.
Specify Mounting Configurations(Luminaire shown for illustrative purposes only - not to scale)
Page 5 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Allowable EPA calculated according to AASHTO 1994 and include allowance for 1/3 gust factor. See Mounting Configuration pages for fixture arm weight and EPA values.
Optional Base Covers for PolesDie cast aluminum, two-piece field installable base covers.
Ouray 600 Sistema
BC3 Optional Base Cover (AT535) Die cast aluminum, two-piece field installable base cover.
Ø5” (127mm)
5 3/16” (131mm)
Ø12 7/16” (316mm)
BC9 Optional Base Cover (AT64) Die cast aluminum, two-piece field installable base cover.
81/8” (205mm)
Ø203/8” (518mm)
Ø6” (152mm)
BC10 Optional Base Cover (AT74) Die cast aluminum, two-piece field installable base cover.
Ø20 3/8” (518mm)
8 1/8” (205mm)
Ø7” (178mm)
BC13 Optional Base Cover (A40) Die cast aluminum, two-piece field installable base cover.
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
A35Round Straight Aluminum Pole
AT535 / AT64/AT74/AT106 Tapered Aluminum Pole
A40Round Straight Aluminum Pole
18” (457mm)
26” (660mm)
Pole
Hei
gh
t
18” (457mm)
Pole width3.5"(90mm)
Pole width4"(102mm)
BC5 Decorative Cast Aluminum Base Cover (A35 Pole Only) Die cast aluminum, two-piece field installable base cover.
Ø3.5” (90mm)
5 1/4” (133mm)
Ø12 7/16” (316mm)
Page 6 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
BOLT CIRCLE DETAIL (Not to Scale)USE CAUTION WHEN SETTING ANCHOR BOLTS. BOLTS MUST BE VERTICALLY STRAIGHT AND CENTERED ON DIMENSIONS SHOWN.
Bolt Circle for A35 & S35 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for A35 & S35
3 1/4” (83mm)
3/4” x 17” Partially Galvanized Anchor Bolts
3/4” -10 Galvanized Heavy Hex Nut
3/4” (19mm) ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4” - 10 Galvanized Heavy Hex Leveling Nut
Bolt Circle for A40 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
A40 POLE ONLY
Hand Hold Location
8 15/16”(227mm)
Ø7 1/2” (191mm) Bolt Circle
Ø3 3/4” (95mm) Conduit Opening
5 5/16”(135mm)
3 1/4
" [8
2mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
CONCRETE
3/4” -10 UNC x 17" Partially Galvanized Anchor Bolt
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
3/4” -10 Galvanized Heavy Hex Nut
3/4” -10 UNC Galvanized Hex Leveling Nut
3 1/4” (83mm)
1/2” (13mm) for leveling
Anchor Bolt Detail for A40
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
Ă4 1/2" [Ă114mm]
9 5/8" [244mm] SQUARE
Ă8 5/8" [Ă219mm]
6 1/8" [155mm]
CONDUIT OPENING
BOLT CIRCLE
HANDHOLE SIDE OF POLE.
Bolt Circle for AT535 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT535
Hand Hold Location
9 5/8” (244mm)
Ø8 5/8” (219mm) Bolt Circle
Ø4 1/2” (114mm) Conduit Opening
6 1/8” (155mm)
3 1/4
" [8
2mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
CONCRETE
3 1/4” (82mm)
3/4” -10 Galvanized Heavy Hex Nut
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4” - 10 Galvanized Heavy Hex Leveling Nut
3/4” -10 x 17" Partially Galvanized Heavy Hex Nut
Ouray 600 Sistema
A35/S35 POLE ONLY
Hand Hold Location
Ø7 3/4” (197mm) Bolt Circle
Ø3” (76mm) Conduit Opening
8” (203mm)
5 5/16”(135mm)
Page 7 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
6 3/4" [172mm]
10 5/16" [262mm] SQUARE
Ă5 1/2" [Ă140mm]
Ă9 1/2" [Ă241mm]
CONDUIT OPENING
BOLT CIRCLE
HANDHOLE SIDE OF POLE.
Bolt Circle for AT64 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT64
Hand Hold Location
10 5/16” (262mm) Square
Ø9 1/2” (241mm) Bolt Circle
Ø5 1/2” (140mm) Conduit Opening
6 3/4” (172mm)
3 1/2
" [8
9mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
CONCRETE
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
3 1/2” (89mm)
3/4” -10 Galvanized Heavy Hex Nut
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4” - 10 Galvanized Heavy Hex Leveling Nut
3/4” -10 x 17" Partially Galvanized Heavy Hex Nut
11 1/4" [286mm] SQUARE
7 1/2" [190mm]
Ă10 9/16" [Ă268mm]
Ă6" [Ă152mm]CONDUIT OPENING
HANDHOLE SIDE OF POLE.
BOLT CIRCLE
Bolt Circle for AT74 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT74
Hand Hold Location
11 1/4” (286mm) Square
Ø10 9/16” (268mm) Bolt Circle
Ø6” (152mm) Conduit Opening
7 1/2” (190mm)
1"-8 UNC X 36" PARTIALLYGALVANIZED ANCHOR BOLT
1" I.D. GALVANIZEDFLAT WASHER
CONCRETE
4 1/8
" [1
05m
m]
1/2" [13mm]FOR LEVELING
1"-8 UNC GALVANIZED HEAVY HEX NUT
1"-8 UNC GALVANIZEDHEAVY HEX LEVELING NUT
4 1/8” (105mm)
1"-8 UNCGalvanized Heavy Hex Nut1” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
1"-8 Galvanized Heavy Hex Leveling Nut
1"-8 UNC x 36"Partially Galvanized Heavy Hex Nut
1'-1 3/16" [335mm] SQUARE
10 1/16" [256mm]
Ă1'-2 1/4" [Ă362mm]
Ă9 5/8" [Ă244mm]CONDUIT OPENING
HANDHOLE SIDE OF POLE.
BOLT CIRCLE
Bolt Circle for AT106 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT106
Hand Hold Location
1'-1 3/16” (335mm) Square
Ø1'-2 1/4" (362mm) Bolt Circle
Ø9 5/8” (244mm) Conduit Opening
10 1/16” (256mm)
CONCRETE
1" I.D. GALVANIZEDFLAT WASHER
1"-8 UNC X 36" PARTIALLYGALVANIZED ANCHOR BOLT
4 3/4
" [1
21m
m]
15/16" [24mm]FOR LEVELING
1"-8 UNC GALVANIZED HEAVY HEX NUT
1"-8 UNC GALVANIZEDHEAVY HEX LEVELING NUT
4 3/4” (121mm)
1"-8 UNCGalvanized Heavy Hex Nut
1” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
15/16” (24mm) for leveling
1"-8 UNCGalvanized Heavy Hex Leveling Nut
1"-8 UNC x 36"Partially Galvanized Heavy Hex Nut
Ouray 600 Sistema
Page 8 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Square Pole Anchor Bolt Template Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown.
3 1/8” (79mm)
1/2” (13mm)
for leveling
3/4-10 UNC x 17" partially galvanized anchor bolt
3/4-10 UNC galvanized heavy hex nut
3/4 I.D. galvanized flat washer
3/4-10 UNC galvanized heavy hex leveling nut
Concrete
3/4-10 UNC x 17" partially galvanized anchor bolt
3/4-10 UNC galvanized heavy hex nut
3/4 I.D. galvanized flat washer
3/4-10 UNC galvanized heavy hex leveling nut
Concrete
3 1/4” (82mm)
1/2” (13mm)
for leveling
1"-8 UNC x 36" partially galvanized anchor bolt
1"-8 UNC x 17' galvanized heavy hex nut
1" I.D. galvanized flat washer
1"-8 UNC galvanized heavy hex leveling nut
Concrete
3 1/4” (82mm)
1/2” (13mm)
for leveling
Base Cover (BC)Optional Base Cover
(U-AQ40)
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
13” (330mm)
Square
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
6 1/2” (165mm)
4” (101.6mm)
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
13” (330mm)
Square
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
6 1/2” (165mm)
5” (127mm)
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
14.5” (330mm)
Square
OPTIONAL BASE COVER
OVERALL HEIGHT
9 3/4" [249mm]
7 1/2” (184mm)
6” (152.4mm)
Optional Base Cover(U-AQ50)
Optional Base Cover(U-AQ60)
Anchor Bolt Detail for Square Pole
4" 5" 6"
Page 9 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Hi-Lo Switching Option (HL30/HL50) Wiring120/240/277V. When red is energized, light output will beat "Lo" level.
SURGEPROTECTOR
BLACK
WHITE
BARE
ORANGE
RED
L1
N
SPARE
L2
FROMFEEDCORD
RELAY
DRIVER(S) /LIGHT ENGINE
CAPPEDINSIDE
FIXTURE
* (347/480V with 5G350 has a transformer - not shown)
Ouray 600 Sistema
Page 10 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
GFCI Receptacle (REC) - 120V 15A GFCI duplex receptacle with weather-proof, self-closing cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 120V applica-tions only. For use with luminaires with other than 120V rating, please consult factory for wire segregation.
GFCI Receptacle (REC2) - 120V 15A GFCI duplex receptacle with weather-proof, self-closing, padlockable in-use cover; located 36” (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 120V applications only. For use with luminaires with other than 120V rating, please consult factory for wire segregation.
2 3/4” (70mm)
4 1/2” (114mm)
5/8” (15mm)
3 9/16” (91mm)
6 11/16” (170mm)
2 1/4” (58mm)
Ouray 600 Sistema
USB & Duplex Receptacle (REC3) (not shown) - 120V 15A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5 Amp, 5 Volt USB outlets. With weather-proof, self-closing cover; located 36" (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
Note: Must be used in conjunction with GFCI breaker by others
USB & Duplex Receptacle (REC4) (not shown)- 120V 15A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5 Amp, 5 Volt USB outlets. With weather-proof, self-closing padlockable in-use cover; located 36" (915mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
Note: Must be used in conjunction with GFCI breaker by others
(TLPC) 3-Pin Twist Lock Receptacle with Photocell (TLR) 7-Pin Twist Lock Receptacle with shorting cap
TLR = 7-Pin Twist Lock Receptacle with Shorting Cap TLPC = TE Connectivity BF Series (BF-PV) 3-Pin
Page 11 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°IN 90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
DREV.
DWG SIZE
TYPE 27 (270Ā)
TYPE 18 (180Ā)
TYPE 09 (90Ā)
HAND HOLDLOCATION
TYPE 00 (0Ā)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0ĀIN 90Ā INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
POLE DEPICTED IS GENERIC PLEASEREFERENCE CUSTOMER ORDER
FOR SPECIFIC POLE MODEL NUMBERTYPE 18 SHOWN
SCALE: 1:16
ADRAWN BY: FAH
DRW
JLJ
REVISIONSREV. ECN DESCRIPTION DATE BY APPR BY
01 XXXX CREATED FOR MARKETING 09/21/2016 FAH DRW
A 0017.17TO DETAIL MODIFICATION TOPOLES AND COLUMNS FOR
SENSOR MOUNTING ORIENTATIONLOGIC
07/12/2017 FAH DRW
12"305.00
NOMINALPOLE
HEIGHTMINUS 12"
NOMINALPOLE HEIGHT
HAND HOLELOCATIONA
4 X Ă .136 3.45 THRU8-32 UNC THRU
2 X Ă .188 4.76 THRU
2.00050.80
3.00076.20
1.00025.40
.50012.70
3.50088.90
3.25082.55
1.62541.28
1.75044.45
1.00025.40
DETAIL ASCALE 1 : 1
MATERIAL: SEE BOM
PRODUCT SERIES:
R
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND ISPROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED ORREPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THEPURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUXCORPORATION.
DWG. #: 6-48B323-00FINISH: PER SO
EXTERIOR SENSOR POLE MOD REFERENCE
T (845) 691-7723F (845) 691-6749
DATE: 9/21/2016
SHEET:1 OF 2
TOLERANCES UNLESS OTHERWISE NOTED:DECIMAL INCH:
.XX ā .02"
.XXX ā .010"
DECIMAL METRIC:
X.X ā .5X.XX ā .25
FRACTIONS: ā 1/32 [.79mm] ANGULAR: ā 1 1/2 Ā
5 LUMEN LANEP.O. BOX 1060HIGHLAND, NY 12528
CHECKED BY:
APPROVED BY:
ES01
A
General Pole Drawing For Example Only
OverallPole
Height
TYPE 27 (270°)
TYPE 18 (180°)
TYPE 09 (90°)
HAND HOLELOCATIONTYPE 00 (0°)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
Sensor angular orientation from hand hole 0°
90° increments clockwise around pole (Type 00,09,18,27)
Pole Motion Sensor
The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a 1/2” KO in a single gang faceplate on pole/column, the SBO utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment.
Series Optics Hand Hole Orientation Program Color Photocell
Feature Voltage
MS
Motion Sensor
1 270° coverage - Single Sensor
00D0 (0V=0%)
WH WhiteY Yes UNV
09 D1 (1V=10%) BK Black N No 347
18 D3 (3V=30%)BZ Bronze
480
27 D5 (5V=50%)
NOTE: Motion sensor comes programmed at 30% dimmed level with a 5 min. delay as default. All programming required after shipping by others.
12”(305mm)
Ouray 600 Sistema
Page 12 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
• 100% Digital PIR Detection, excellent RF Immunity
• 270° coverage pattern
• Up to 30ft mounting
• IP66 Rated for outdoor applications
• Built-in 1kV surge protection
• No minimum load requirements
• Made for LED light source
• Interchangeable hot and load wires - impossible to wire backwards
• Adjustable time delays, max/min dim levels and ramp rates
• Programming button accessible without opening sensor or removing gaskets
• No field calibration or sensitivity adjustments required
• Non-volatile setting memory
• Convenient test mode
• Suitable for Title 24 applications.
Motion Sensor Wiring Diagram
Pole Motion Sensor
LINECORD
BLKWHTBLKVIO
SBO SENSORGRY
GRN
WH
T
BLK
BLK
WH
TG
RN RED
ORG
BLK
WH
TG
RN
ORGRE
D
FIXT
URE
FEED
CO
RD
WEATHERPROOF WIRE CONNECTOR,600V 18-8GA
(SUPPLIED)
ATTACH CORD TO BACK OF SENSOR MOUNTING PLATEWITH 2 ZIP TIES (NOT SUPPLIED)
Ouray 600 Sistema
Page 13 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Catalog #: U6-R1-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8561lmInput Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 4573 at 57.5° from vertical.IES classification: Type IIMounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%
R1 Optics / 77W LED / 3000K CCT
Catalog #: U6-R2-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8624lm Input Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 4554 at 60° from vertical.IES classification: Type III Mounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%
R2 Optics / 77W LED / 3000K CCT
Catalog #: U6-R5R-XX-XX-5G350-30-XX-UNV Delivered Lumens: 8598lm Input Watts: 77W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80 Maximum candela of 5480 at 62.5° from vertical.IES classification: Type III Mounting Height: 20’ (6 m)BUG Rating: B2-U0-G2Power Factor: 0.998Total Harmonic Distortion: 10.5%
R3 Optics / 77W LED / 3000K CCT
Page 14 of 14 (Rev. 02/2020) ORY6S_ss_v6.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.